Related
Hey guys, my samsung galaxy s has the UGJG9 firmware installed. was just wondering what the difference is between that and the latest one?
New JH2 + SPL fix
Samsung Mobile Canada Thank you for your continued patience on the three-button reset issue. Your feedback is important to us and we are pleased to provide a resolution for Bell Mobility’s GT-I9000. Please find full details posted in the link below.
Samsung Galaxy S Vibrant (GT-I9000) Software Upgrades for Handsets with Original Production Software
A software upgrade is now available for Bell Mobility Galaxy S Vibrant handsets, provided the device has original production software (JG9). The latest version of Kies has been tested and will resolve the three-button recovery issue. Please note, this solution is for Canadian devices only....
By:Samsung Mobile Canada
Click to expand...
Click to collapse
http://www.facebook.com/samsungmobilecanada
Apparently they released the JH2 again but including a SPL fix, so people already on JH2 will need to flash back to JG8 or something, then flash forward to JH2 again to get the new SPL fix
I got JH2 the other day. Yesterday my phone was going retarded, freezing and losing signal when it never had before. Seemed ok last night and today though I haven't spent much time with it today.
GPS was totally out of whack last night, sitting still and my location was jumping all over the place. Google navigation is unusable. Checked compass in GPS essentials and it was fine but in nav it just spins around and can't get it right.
Youtube widget changed. Now shows most viewed on the main bar but video and search buttons are not functioning properly. Right now it only shows the search button. If I search or launch youtube then go back the video button will be there but neither thet nor the search button will work. Wish I had just left it alone.
did you get the update with the spl fix?
and was your 3 button mode working for you before?
if not does it work with the new update?
lol so many questions... and thanks for the replies and the update on the firmware.
Just update dude. Everyone is experiencing various issues regardless of the firmware. I run 3 to 4 times a week using endomondo and the GPS tracks my route almost flawlessly. A few hitches here and there but nothing horrible.
My 3 button combo wasn't working at all and I was already on JH2. Had to do the registry trick to get Kies to flash the new JH2 on my phone and now it works. Upgrading to the new JH2 is the best choice to make, especially if you have plans on using a few mods.
I highly recommend the battery mod available on this forum after you upgrade. The SGS stock battery indicator is horrible and inaccurate, and I rather not waste my homescreen space on a battery widget.
Ya, did the update a few days ago. Three buttons work now and my gps doesnt think im in japan anymore (ya it was that bad) anyway definitely worth the update.
Sent from my GT-I9000M using XDA App
My 3 button mode worked before the update, I haven't tried it since. I haven't rooted and not sure yet if I will, will see how official 2.2 goes first.
Still losing signal though. Yesterday the girlfriend tried to call me and said she either got a busy signal (WTF) or it just went straight to voicemail.
Today I tried to make a call and had to redial two or three times because it kept losing signal. Def a problem with the phone and not anything to do with reception in my area. Only phone calls though, never lose signal when using data or market ect.
Guys, I'm a bit dense on this subject so please be kind.
I have JH2 on my Galaxy. I can't remember if I updated to this version via Kies.
So far, the 3-button recovery problem has not affected me. I haven't rooted Android (since I don't need SU rights), I haven't yet unlocked the phone (no need) and I haven't attempted any Android system updates. I guess I could be called an average user. I haven't tested the 3-button issue.
What circumstances could arise down the road, which would make it necessary for me to do a 3-button recovery? In other words, is this a problem which could affect all Galaxy owners?
Thanks.
androiderer said:
Hey guys, my samsung galaxy s has the UGJG9 firmware installed. was just wondering what the difference is between that and the latest one?
Click to expand...
Click to collapse
I updated to JH2 prior to the SPL fix inclusion and found it to be better than JG9...smoother and less lag issues. Just make sure to backup everything.
My phone is still on jg9. It never had the three button issue it always worked for me. If I upgrade to jh2 how will this affect me?
Sent from my GT-I9000M using XDA App
MaestroSeven said:
My phone is still on jg9. It never had the three button issue it always worked for me. If I upgrade to jh2 how will this affect me?
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
if it was working, it will continue to work
if it was NOT working, it will now work
TheChancellor said:
Just update dude. Everyone is experiencing various issues regardless of the firmware. I run 3 to 4 times a week using endomondo and the GPS tracks my route almost flawlessly. A few hitches here and there but nothing horrible.
My 3 button combo wasn't working at all and I was already on JH2. Had to do the registry trick to get Kies to flash the new JH2 on my phone and now it works. Upgrading to the new JH2 is the best choice to make, especially if you have plans on using a few mods.
I highly recommend the battery mod available on this forum after you upgrade. The SGS stock battery indicator is horrible and inaccurate, and I rather not waste my homescreen space on a battery widget.
Click to expand...
Click to collapse
how do you do this hack, i wanna put my bell rom back on the phone, i flashed to 2.2 froyo and wanna go back to bell rom now.
please link me
hansonator said:
My 3 button mode worked before the update, I haven't tried it since. I haven't rooted and not sure yet if I will, will see how official 2.2 goes first.
Still losing signal though. Yesterday the girlfriend tried to call me and said she either got a busy signal (WTF) or it just went straight to voicemail.
Today I tried to make a call and had to redial two or three times because it kept losing signal. Def a problem with the phone and not anything to do with reception in my area. Only phone calls though, never lose signal when using data or market ect.
Click to expand...
Click to collapse
I havent been able to update to JH2 from JG9 (trying to use kies but thats a prize in itself) but I have in the past gotten where I would try to call, and as the call dropped while still dialing it would tell me the radio is off. Or it would tell me im in airplane mode etc.
Now for the last 24 hrs I have yet to be able to make a call, although datta and texting works perfectly fine, every time I make a call it says my radio is off. And the same problem when someone calls, they are lucky if they get a fast busy signal.
Im talking with bell to get a replacement in store, if not I have a 'insurance' plan that'll give me a loaner etc while they ship it out.
Any update on whether your phone is still dropping into Flight mode?
I ran into this article yesterday, How to Flash CyanogenMod 7 ROM Samsung Captivate AT&T, and felt it was about time to learn about this. Plenty of you have already ROOTED your phones, and know from experience, what to do. But, I don't. Right now, I'm stuck with the options of accepting things don't work right, because of AT'T's unwillingness, or inabilility, to correct the issues I have, or reinsiall new, and lose all I've put on, or send back to Samsung for repair, and have them lose all I have on it, or try Rooting and adding a ROM, that may solve my issues. But to do that, I need a little help in understanding it.
First, if I try and run a program, like CyanogenMod 7, and it doesn't work correctly, snd screws up my phone, is there a way I can reinstall Android, and start over, or is that the proverbial kiss of death for my Captivate, and I'm stuck with it like that?
Second, is this the right ROM to try? AT&T can't fix my BLOCKS, of UNKNOWN APPS. The Settings change is easy, you click on activating Unknown, in Application settings..., unless you have no UNKNOWN, to choose. Also, in MMS settings, AT&T shows in a tutorial, that you have the option, of activating Delivery Report and Read Report. It shows this as plain as day, on that tutorial for the Captivate, yet mine, has NEITHER OF THOSE OPTIONS. Also, to TURN ON EDGE, the setting is missing, so I can't activate EDGE, which I guess is no big thing, since the towers AT&T has for us to connect with, THAT ARE 2G, are in such poor condition, no one can connect to them. Thank you, WIFI, for helping me get, ONLINE. Will this, or other ROM's, solve this for me?
If there are any suggestions of how to do this, and what to use, I'd appreciate hearing it from you. Again, I thank any effort, to help me.
1.cm 7 would not be the best rom to flash for your first time.
2. All roms are android, you are running at&t/samsung version of an android rom...
3. Yes you can get back to your stock rom if you don't like/something goes wrong (other than a bad bootloader flash)
4.all custom roms have all the blocking done by at&t removed so switching to 2g(edge) is possible and also faster 3g speeds known as hspa. And unknown sources is in the settings so you can install apps from outside the market.
5.the threads at the top of every section with a little thumb tacks are called stickies, give those a read through.
Like he said above. If you want the pretty much stock experience that your used to but want it fixed then I would suggest starting off with Cognition 4.4 or whatever it is now.
Sent from My KickAss Captivated CM7 OC'd 1.55Ghz/Undervolted
From newbie to a newbie, I took the advice of others and read threads for atleast a month before I flashed my first rom. My choice was Andromeda3, It has a written tutorial and a video on how to from start to finish. From what tools or apps you will need and how to use them , I watched that atleast 6 times and also while I was flashing the kernel and the rom. It may have been overkill but my flash was perfect and I'm real happy with my phone now. You may not go with the same rom I did but do your self a favor and do what I did to prepare for your first flash.
My girlfriends D3 has gradually been getting worse with poor reception, dropping calls, not being able to make/receive calls or texts.
Data seems to work fine. This weekend it just finally stopped being able to make calls or send texts from our home.
If i drive a few miles down the road or to a higher elevation i was barely able to call *228 to update roaming.
I can still use the browser over 3G and Wifi, just no tethering, phone or text.
The phone shows 3G and a full signal, but as soon as i initiate a call it drops to 1 bar.
Another thing we noticed this morning is that when calling the phone it goes straight to voicemail.
I had tried changing the Network mode from Global to CDMA yesterday and at one point got an error message saying "No CDMA networks were found. Would you like to switch to Global Mode?"
Phone has been rebooted and battery pulled along with some other diagnostic tests that the verizon techs did over the phone yesterday.
The only thing i had done to this phone was i applied the TBH tethering hack without root over a year ago. It worked fine up until now.
The phone has the latest System version 5.7.906.XT862 and the latest Baseband N_03.18.32P.
Im thinking of reverting the TBH Tethering hack back using the instructions in this post
I spoke to Verizon tech support yesterday and they said there was some trouble in our area, but my Droid X is still able to connect so i doubt thats the issue.
Does anyone think that an OTA update from Verizon may have screwed something up due to the TBH hack being applied?
The GF is frantic about getting her phone back. I can take out insurance for 6.99 pr/month and pay $100 to get her a new phone, but if reverting the TBH hack and maybe rooting and installing a new ROM might help, im all for it.
Any thoughts? ROM advice? Was reading up about the AOKP Build 40 ROM, but wondering if all the hoop jumping will help or if the D3 has a hardware issue that has just got progressively worse.
Wont you help a poor guy keep the peace with his lady please?
I don't think it's that. It's possible that the 3G in the area is good but 1x is crap. 3G is just used for data while calls/texts are used on 1x. What is the PRL versions your phone and her phone have?
MrObvious said:
I don't think it's that. It's possible that the 3G in the area is good but 1x is crap. 3G is just used for data while calls/texts are used on 1x. What is the PRL versions your phone and her phone have?
Click to expand...
Click to collapse
My Droid X running on VXLR V2.2.0: PRL 53018
Her Droid 3 Stock w/TBH Tethering Hack: PRL 52996
Just tried updating them both and the PRL's stayed the same.
About an hour ago i was in the middle of backing up her phone and it started ringing. I was able to answer the call and now im able to make and receive texts and calls. There must have been a tower issue. The signal still drops to 2 bars when i initiate a call, but at least its working again.
She says its been flaky for quite a while with dropping calls and texts not getting sent. Im all backed up and was thinking of rooting and trying a ROM on this. Not sure if itll help with signal issues, dropped calls or texts not being sent or received.
She was also complaining about the thing pocket dialing, and other random stuff happening like her browser launching and texts being sent etc. I saw it this morning. I picked up her phone to bring it downstairs and saw that there was a text reply box open with a bunch of jibberish typed in it. She says that sort of thing happens all the time.
Think maybe a good stable ROM might help?
After a little more research i came across Minimoto here at XDA. Minimoto Link
Seems to be the way to go if im sticking to a GB ROM. I see you contributed some to it. Would you happen to know where some step by step instructions for getting it installed on a non rooted D3 might be?
1) Root it.
2) Install Safestrap 3.05.
3) Reboot to it, create ROM-Slot 1.
4) Factory reset and wipe cache and delvik.
5) Flash the ROM.
6) Set her up with goodness.
Though if random crap is popping up, I suspect the digitizer is flaky.
MrObvious said:
1) Root it.
2) Install Safestrap 3.05.
3) Reboot to it, create ROM-Slot 1.
4) Factory reset and wipe cache and delvik.
5) Flash the ROM.
6) Set her up with goodness.
Though if random crap is popping up, I suspect the digitizer is flaky.
Click to expand...
Click to collapse
Have you heard of digitizer issues with D3's before?
Any recommendations on which rooting method to use?
Do i have to remove the TBH Tether hack before rooting, installing Safestrap or Flashing the ROM?
So i take it your in agreement that this would be a good choice for a stable no frills GB ROM?
the random stuff can be from from a bad digitizer, dirt/grime on digitizer/edge or a software conflict
try cleaning screen around the edge, and/or flash rom/sbf
you need to remove bootstrap before safestrap, tbh hack should be fine
i haven't use minmo, but many have, also you could look at
http://forum.xda-developers.com/showthread.php?t=2106722
use the Deodexed ROM (Courtesy of thingonaspring) link
sd_shadow said:
the random stuff can be from from a bad digitizer, dirt/grime on digitizer/edge or a software conflict
try cleaning screen around the edge, and/or flash rom/sbf
you need to remove bootstrap before safestrap, tbh hack should be fine
i haven't use minmo, but many have, also you could look at
http://forum.xda-developers.com/showthread.php?t=2106722
use the Deodexed ROM (Courtesy of thingonaspring) link
Click to expand...
Click to collapse
Thanks sd_shadow I think ill stick with minimo most likely. Too many dam ROMS to choose from!.
Ok so from the hours of reading i did yesterday, i found a working link for motofail. It appears it is the best (or only) way to root the D3 if on 906.
From there i thought i could just install Safestrap 3.05 which i managed to track down as well.
I never installed Bootstrap, so does this even apply? Is there a factory bootstrap included with the D3?
I believe i read that minimoto has its own tethering feature included. So are we sure i dont have to revert the TBH tethering hack?
Some great links in your signature by the way. If the digitizer keeps acting up, i may try replacing it. I did clean it last night and will see if things improve.
LOTL said:
Thanks sd_shadow I think ill stick with minimo most likely. Too many dam ROMS to choose from!.
I think your the only person to say that for the d3 lol. Most of us are flash- a-holics and we love lots of roms to chose from.
Ok so from the hours of reading i did yesterday, i found a working link for motofail. It appears it is the best (or only) way to root the D3 if on 906.
From there i thought i could just install Safestrap 3.05 which i managed to track down as well.
I never installed Bootstrap, so does this even apply?
Just install safestrap on your safe system after root don't worry about bootstrap.
Is there a factory bootstrap included with the D3?
No
I believe i read that minimoto has its own tethering feature included. So are we sure i dont have to revert the TBH tethering hack?
No you do not have to undo the tether hack it is a hardwear hack not a software hack and will work on any rom no matter if the rom already has tethering in it.
Some great links in your signature by the way. If the digitizer keeps acting up, i may try replacing it. I did clean it last night and will see if things improve.
Click to expand...
Click to collapse
Sent from my DROID3 using XDA
replacing the digitizer is a pain
some [how to] links in my list
[Q&A] |ROM|★ARCADIA v1.0★|►T-MOBILE/CANADA◄|NOV.17.14|★
Q&A for |ROM|★ARCADIA v1.0★|►T-MOBILE/CANADA◄|NOV.17.14|★
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for |ROM|★ARCADIA v1.0★|►T-MOBILE/CANADA◄|NOV.17.14|★. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Nadroind
force70 said:
Your nandroid would have the boot img, why wouldnt it lol?
sent from Canada via my Note 4, 3 or 2.
Click to expand...
Click to collapse
Nandroid is basically a backup right? Does TWRP backup count?
re: nandroid backup
HomieTheClown said:
Nandroid is basically a backup right? Does TWRP backup count?
Click to expand...
Click to collapse
TWRP backups are what we call Nandroid.
Good luck!
Hello just wondering if there was a fix for the GPS?? I can't get a lock at all.... Thanks in advance
Anyone?....?......?.....?....
GPS fix? ? ?
AWESOME!! New mexican firmware i believe! Making Nandroid
Any ETA?
Difference between Rapture and Arcadia
Guys, I'm fairly new to this, and new to Note 4.
Was looking for a ROM and came across the Rapture and Arcadia. Is the main difference the base used? T-Mobile /Canadian? Or am I missing a bigger picture?
From the Arcadia thread:
Yea I think so too. This build is based on the Canadians firmware AND it has the ability to self clean every 7 days. Rapture is based on Tmobile build. I guess not much difference. Either ROM is a killer. 
Deleted.
Issue/Question RE: waking phone
I am having trouble with "waking" the phone.
When I press the power button it usually takes 2-3 seconds for the phone to turn or "wake." The home button does the same, lags to turn phone on.
This happens at any point of the day: when full battery, halfway through battery, low battery, during charging. Reboots do not seem to help.
I installed ROM clean also, anyone know what to do or what could be causing this?
I can't find montblanc on 's mote
Samsung Back up and restore not available?
using canadian note 4, there is no option to back up or restore from my samsung account, anyone else having this issue?
Thanks!
Thank you for the amazing rom.
since, I am in canada, I am trying out the OC3 Lollipop (stock) for now,
but with all the fc's and general sluggishness I am really missing the arcadia v3!
Just here to say amazing job! and thanks! for dev-ing the canadian firmware!
Appreciated
Thank you sir, I have donated to your account a couple of times. Waiting impatiently.
Alarm not working in DND mode
Lollipop update
If Do not disturb mode selected (scheduled mode) then Alarm is not ringing even it is selected in the exceptions. Notification message says Alarms Muted, and select/unselect alarms in exceptions list doesn't do anything.
Netflix
hey man huge fan of your work,great job on the ROM runs buttery smooth,amazing ROM but I noticed one issue Netflix does not seem to connect to the chromecast,I reset chromecast just in case it was my end,but had no luck any workaround or any fix would be really helpful thank you Man and again love the ROM best TouchWiz lollipop rom..and I am running a t mobile setup
---------- Post added at 01:57 AM ---------- Previous post was at 01:35 AM ----------
Xx_big guy_xX said:
hey man huge fan of your work,great job on the ROM runs buttery smooth,amazing ROM but I noticed one issue Netflix does not seem to connect to the chromecast,I reset chromecast just in case it was my end,but had no luck any workaround or any fix would be really helpful thank you Man and again love the ROM best TouchWiz lollipop rom..and I am running a t mobile setup
Click to expand...
Click to collapse
ok excuse my last post truly sorry I found a workaround so dumb of me cleared cache from app then rebooted and now she is working slowly but working
why after flashed this i experience lag, its not smooth at all, or that just me?
I updated my baseband for lollipop, all went great, data and GPS works. But my reception crapped the bed pretty bad. Lots of time where I have no signal or says not registered on network. Any suggestions or ideas? Thanks guys!
Status bar mods
Hi, love this rom so far thanks for all your hard work you must enjoy this to put the time in wish I had time to learn. I was running the vision rom by Alexia on Pg 149 there was a post for a download of a systemui. Apk that removed the clock from the status bar by Supergrobi24, I tryed on Arcadia 4 and error message was systemui has stopped, at which point did a wipe and reset and restored my backup. My question have you worked on mod like this for Arcadia.???https://www.dropbox.com/s/mqjq3qmdax...ockFW.zip?dl=0
---------- Post added at 01:32 PM ---------- Previous post was at 01:20 PM ----------
Bluetooth issue in Samsung Galaxy Note 4 4.4.4. I found the post below I use a Motorola sliver 2, my phone before nexus 5 had no such issue, sometimes sounds like I'm in a tin can and fades out on short distance from phone. My question do you believe it could be the stated issue and does Arcadia address this issue.
finally have information (but not a fix) as to why my Note 4 is having bluetooth connection problems on my 2014 Nissan Altima. The Nissan bluetooth department told me that it's a known Samsung issue that they're working on. Apparently, the Note 4 and Edge all use the newest AVCRP 1.5, which nobody else uses yet. Nissan told me that they were told my Samsung, that in their next update, they're going to revert the phones back to AVCRP 1.3, which is the standard in the industry. I don't know when that will happen, but at least I know why now. I have no idea what AVCRP is, by the way. I'm just relaying the info from bluetooth support.
N910w8 csc problem
Hi, I just did a clean install, arcadia v4.1 (oc4)
I am on telus (TLS) but, when i was done with the clean flash, i realized that it had bell (BMC) as CSC.
of course I went to CSC setting *#272^IMEI# to install TLS but, When automatically booted to TWRP to install the CSC,
It keeps on giving 'FAILED' error on TWRP. Since I do not know much about the inner workings of these stuff,
I just can guess that it's either TWRP acting up or there seems to be some quirk with how roms sets up the CSC codes.
If anybody can chime in and help me out! it's greatly appreciated!
So I have the T-Mobile variant of the LG G4. I had it unlocked straight from the carrier a while ago and all seemed well. Recently I noticed a huge amount of battery drain and 4G LTE usage from T-Mobile's pre-installed apps--mainly com.tmobile.pr or something which is the "My Account" app (imagine being at 60% left with 27% of the drain having been an app and only 9% the screen. Yeah, it was that bad)
This I obviously found unacceptable, so I went ahead to try and uninstall the bloatware. Lo, much to my dismay, Tmobile has locked it down so you can't uninstall the bloatware, and you can only disable it. This alone irked me enough that I wasn't satisfied with just a disabling. I knew I wouldn't rest until I had obliterated it.
I've had plenty of android phones over the years and done my fair share of rooting and flashing ROMs and the like, but I hadn't touched that aspect of my G4 because I wanted a dependable device for school and I didn't want to mess around with it. I knew I'd have to root it to get rid of the tmobile bloatware so I went and did that using the Low effort root method (http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765). When this was done a lot of my background processes started to continuously crash. I decided to go ahead and put TWRP as the custom recovery and just go ahead and get some dependable 6.0 ROM, and I found a couple of them.
When I flashed the first ROM, the play store services were crashing so I found the google apps package for marshmallow and flashed that too. It seemed to fix the issue. Yet when I would click on my School's WiFi at the setup (which is WPA2 Enterprise) it would crash and say "Unfortunately WiFi has stopped working." I thought that perhaps I mucked something up in the flashing of the ROM, or that maybe there was an issue with the ROM in general, so I decided to just flash another ROM entirely (after factory resetting it all the way). Along the same time as this I found a slightly more modified and feature packed version of marshmallow by this lad here (http://forum.xda-developers.com/g4/development/h815-genisys-rom-1-0-classic-v10g-t3192649). I decided to go ahead and use this one since it had a h811 version there, that involved flashing a h815 and then flashing a patch.
The "Unfortunately WiFi stopped working" issue persisted, however. I found this odd. I then noticed that if I click any other network that ISN'T the WPA2 enterprise network my school is working that everything seems to work fine.
I went ahead and factory reset it all the way again in the hopes that would fix it. No luck.
I booted it to safe mode and tried to connect to the WiFi network from there. No luck.
I downloaded a third party WiFi app off cellular and tried to connect from there. No luck.
I can't enter the WiFi's name and try to enter directly because it crashes there too.
I can't "Forget" the network as it's never joined that network before so there's nothing to forget. It does let me enter the advanced options but a direct press causes it to crash.
So throughout ROMs and wipes and safe modes and all, this one issue has persisted, where my phone's WiFi will crash when it tries to connect to my school's WPA2 Enterprise network. I've tried plentiful fixes short of flashing back to a 5.0/5.11 stock (which I'm hesitant to do because I read something about phones bricking after they downgrade from Marshmallow using the .kdz files or something?).
I'd really appreciate any help that y'all can provide. I've read these forums for ages but this will be my first time making an account because I can't find anybody else with the same issue and its proving to be quite a pain.
tl;dr wifi isn't working with only one particular network and no fix I've tried under this sun has worked so far. help will be appreciated pls
Have you tried flashing this rom here --> http://forum.xda-developers.com/tmobile-g4/development/rom-g4-h811-xtreme-rom-v1-0-7-28-15-t3167667
I am using this one here and I have no issues using wifi. I cannot speak for the 6.0 roms because LG has not dropped the sources for the Tmo variant yet.
esjames said:
Have you tried flashing this rom here --> http://forum.xda-developers.com/tmobile-g4/development/rom-g4-h811-xtreme-rom-v1-0-7-28-15-t3167667
I am using this one here and I have no issues using wifi. I cannot speak for the 6.0 roms because LG has not dropped the sources for the Tmo variant yet.
Click to expand...
Click to collapse
I got the brown leather variant from Tmobile and it only says H811 as far as I can tell. Not sure of if its the "n" version or not.
I have not tried that rom but ill be sure to give it a go, hoping it will help solve the issue. I did some additional testing and can confirm the issue lies with all WiFi networks that employ WPA2 Enterprise security.
Will there be any issue with the Rom when downgrading from Android 6.0? I was reading about phone's bricking when trying to downgrade certain versions or bootloaders on the tmobile variants.
I'm pretty sure going back to stock 5.1 will be fine. The Tmo variant hasnt been upgraded to 6.0 yet and the ports don't update the bootstacks. Read here --> http://forum.xda-developers.com/tmobile-g4/development/global-marshmallow-6-0-port-to-h811-t3232760
Update: It seems that any Android 6.0 flash cuts off the ability to connect to Enterprise wireless networks. I went ahead and flashed to the debloated stock rom on the thread you mentioned, but it cut off the ability to record video. As such, I went for the xTreme version that you mentioned, and flashed the camera restores and all.
Everything works fine now as far as I can tell. I also got rid of the Tmobile applications draining the battery and all that. All should be well. Thanks again for the help