Related
So I got carried away with trying to get rid of that three dot menu button at the bottom of the screen and I've slowly managed to work myself into a really bad problem. I'm not necessarily new to this, I've rooted my Droid 2, Droid 3, and GS3, but this has been more complicated for me.
Anyways, my problem is, I was trying to wipe my phone so that I could flash a ROM. This is because I couldn't access my settings (I overwrote the original in an attempt to get rid of the multitask button). But while I was in CWM I factory reset it but I also accidentally deleted the system. My bootloader is unlocked, but now my phone is on and I can't get into recovery, and I'm assuming it's because the whole system is gone so there's nothing to boot.
Another problem I had (while my phone was able to boot up completely), Android File Transfer wouldn't work, I downloaded a rom for the settings.apk but it wouldn't let me transfer files between my computer and phone. I emailed the .apk to myself but since I couldn't access settings I wasn't able to pick my usual email (although now I'm thinking I should have just used the email I first signed in with). Not as much of a concern but input is still welcome.
I've looked up RUU but it looks like it's not available yet for Verizon. Any possible solutions would be MUCH appreciated.
Don't worry, your device is not bricked.
If your bootloader works well, you must select fastboot and flash the recovery via fastboot.exe in the command line. Now you should be able to get into recovery.
If you wiped your partitions, you can have a trouble with mounting /sdcard. Then you should get an OTG Micro USB cable and put ROM on your USB stick, but I'm not sure if TWRP recovery for HTC One supports mounting flash memory from USB host.
Gudio142 said:
Don't worry, your device is not bricked.
If your bootloader works well, you must select fastboot and flash the recovery via fastboot.exe in the command line. Now you should be able to get into recovery.
If you wiped your partitions, you can have a trouble with mounting /sdcard. Then you should get an OTG Micro USB cable and put ROM on your USB stick, but I'm not sure if TWRP recovery for HTC One supports mounting flash memory from USB host.
Click to expand...
Click to collapse
I'm stuck on the green HTC logo screen and the red warning about the bootloader. I can't boot into recovery anymore. By the way I'm using a Mac but I do have a PC running Windows 8 if there's solutions I could try
Gudio142 said:
Don't worry, your device is not bricked.
If your bootloader works well, you must select fastboot and flash the recovery via fastboot.exe in the command line. Now you should be able to get into recovery.
If you wiped your partitions, you can have a trouble with mounting /sdcard. Then you should get an OTG Micro USB cable and put ROM on your USB stick, but I'm not sure if TWRP recovery for HTC One supports mounting flash memory from USB host.
Click to expand...
Click to collapse
I tried flashing into recovery via fastboot but my computer doesn't recognize my device. And I'm pretty sure I had drivers installed since that's how I unlocked the bootloader in the first place..
xerhoffx said:
I tried flashing into recovery via fastboot but my computer doesn't recognize my device. And I'm pretty sure I had drivers installed since that's how I unlocked the bootloader in the first place..
Click to expand...
Click to collapse
Install the latest drivers and try from a windows 7 pc (or windows 8, win 8.1 doesn't work well)
Reinstall drivers if you haven't already and try the correct file for your 'Modelid' here. It's the only way I got mine to work again after i did the same thing.
Note: The file i used had a different software version but it still flashed ok.
After that, if you can find the right Nandroid you now have the ability to flash that
n1234d said:
Install the latest drivers and try from a windows 7 pc (or windows 8, win 8.1 doesn't work well)
Click to expand...
Click to collapse
I only have Windows 8 I believe...
xerhoffx said:
I only have Windows 8 I believe...
Click to expand...
Click to collapse
Try a different PC, worked for another guy whose pc wouldn't detect his phone. See if a pc with XP works..
ndulian increase
jingles98 said:
Reinstall drivers if you haven't already and try the correct file for your 'Modelid' here. It's the only way I got mine to work again after i did the same thing.
Note: The file i used had a different software version but it still flashed ok.
After that, if you can find the right Nandroid you now have the ability to flash that
Click to expand...
Click to collapse
Where could I find a nandroid for Verizon? I feel like Verizon is the most difficult to find.
FIXED
I was finally able to boot into recovery and thank goodness had a CWM backup. Thanks for your input guys.
Hello!
I did a root with odin on my device many time ago, it was successfull. But after that, when I plug the USB in the computer, it only charges. It wasn't important for me, because my device was rooted.
But nowadays I tried to update to 4.4.2 from 4.1.2, so I thought that if I wipe cache and data the USB will work again... but no, so I thought: "maybe if I unroot...", and now I have a gt-i8190n without root and with an USB that only charges.
I tried to update from SD, but the result is: "signature verification failed".
I can get in download mode, but my computer doesn't recognize the device (tried in other computers, and with other cables).
So, here is my question: Will a JIG USB solve anything?
Thanks
saadiko said:
Hello!
I did a root with odin on my device many time ago, it was successfull. But after that, when I plug the USB in the computer, it only charges. It wasn't important for me, because my device was rooted.
But nowadays I tried to update to 4.4.2 from 4.1.2, so I thought that if I wipe cache and data the USB will work again... but no, so I thought: "maybe if I unroot...", and now I have a gt-i8190n without root and with an USB that only charges.
I tried to update from SD, but the result is: "signature verification failed".
I can get in download mode, but my computer doesn't recognize the device (tried in other computers, and with other cables).
So, here is my question: Will a JIG USB solve anything?
Thanks
Click to expand...
Click to collapse
tried another cable?
disable signature verification
efaustino84 said:
tried another cable?
disable signature verification
Click to expand...
Click to collapse
yes, i did it.
How can I disable signature verification? my recovery is a 3e WITHOUT modify. And remember, no root and no USB connection (nobody said was going to be easy).
PD: English isn’t my first language, so please excuse any mistakes, I'm spaniard.
saadiko said:
yes, i did it.
How can I disable signature verification? my recovery is a 3e WITHOUT modify. And remember, no root and no USB connection (nobody said was going to be easy).
PD: English isn’t my first language, so please excuse any mistakes, I'm spaniard.
Click to expand...
Click to collapse
i am sure there should be a twrp or cwm zip file that you can load via SD
world cup not looking good
efaustino84 said:
i am sure there should be a twrp or cwm zip file that you can load via SD
world cup not looking good
Click to expand...
Click to collapse
I've tried many files (I can take the microSD and load files in the computer). But when I start the recovery mode and select external storage, it seems to work, until it arrives to that signature message.
Yes, my i8190n is working as good as Spain in the world cup.
saadiko said:
Hello!
I did a root with odin on my device many time ago, it was successfull. But after that, when I plug the USB in the computer, it only charges. It wasn't important for me, because my device was rooted.
But nowadays I tried to update to 4.4.2 from 4.1.2, so I thought that if I wipe cache and data the USB will work again... but no, so I thought: "maybe if I unroot...", and now I have a gt-i8190n without root and with an USB that only charges.
I tried to update from SD, but the result is: "signature verification failed".
I can get in download mode, but my computer doesn't recognize the device (tried in other computers, and with other cables).
So, here is my question: Will a JIG USB solve anything?
Thanks
Click to expand...
Click to collapse
I think you need to install the USB drivers for your s3 mini.
If you use TWRP as recovery then boot to recovery > settings > uncheck "Zip signature verification" then you will not again get a failed message.
Do a nandroid backup before you start flashing
xXPR0T0TYPEXx said:
I think you need to install the USB drivers for your s3 mini.
If you use TWRP as recovery then boot to recovery > settings > uncheck "Zip signature verification" then you will not again get a failed message.
Do a nandroid backup before you start flashing
Click to expand...
Click to collapse
The drivers are correctly installed, because the first time I rooted I had no problem, and after it, I have plugged another device (an i8190n, too) and the computer recognizes it without any problem.
I have a 3e recovery, so I can't uncheck "Zip signature verification".
May I start to look for a jig USB?
saadiko said:
The drivers are correctly installed, because the first time I rooted I had no problem, and after it, I have plugged another device (an i8190n, too) and the computer recognizes it without any problem.
I have a 3e recovery, so I can't uncheck "Zip signature verification".
May I start to look for a jig USB?
Click to expand...
Click to collapse
No wonder why it fails 3e recovery is the stock recovery from s3 mini. You can only flash signed zip from Samsung. You need a custom recovery for flashing custom ROMs if you still have root access then download from play store "ROM Manager" and install CWM recovery or download "[ROOT] Rashr - Flash Tool" for flash CWM or TWRP recovery.
xXPR0T0TYPEXx said:
No wonder why it fails 3e recovery is the stock recovery from s3 mini. You can only flash signed zip from Samsung. You need a custom recovery for flashing custom ROMs if you still have root access then download from play store "ROM Manager" and install CWM recovery or download "[ROOT] Rashr - Flash Tool" for flash CWM or TWRP recovery.
Click to expand...
Click to collapse
I'm so clever that I unroot the device hoping the USB works :silly:
Can I flash a signed zip from Samsung from the SD and pray for the USB works normally again?
saadiko said:
I'm so clever that I unroot the device hoping the USB works :silly:
Can I flash a signed zip from Samsung from the SD and pray for the USB works normally again?
Click to expand...
Click to collapse
Put the phone in download mode and flash twrp in odin. It's the only way to put a new recovery there without root already.
Otherwise root it, and then flash recovery with rommanager or other similar app.
tys0n said:
Put the phone in download mode and flash twrp in odin. It's the only way to put a new recovery there without root already.
Otherwise root it, and then flash recovery with rommanager or other similar app.
Click to expand...
Click to collapse
As I have mentioned before, my device USB only charges, there isn't communication with computer. I know how odin works, but the problem is with the USB.
I'm asking if JIG USB is the only solution, and if it will work.
Thanks for all the answers, but as I had said before... USB only charges :crying:
saadiko said:
As I have mentioned before, my device USB only charges, there isn't communication with computer. I know how odin works, but the problem is with the USB.
I'm asking if JIG USB is the only solution, and if it will work.
Thanks for all the answers, but as I had said before... USB only charges :crying:
Click to expand...
Click to collapse
If there are no other way then try JIG USB if you think it will work
xXPR0T0TYPEXx said:
If there are no other way then try JIG USB if you think it will work
Click to expand...
Click to collapse
I'm not sure if it will work, but it's the last thing to try.
I have made an order of the jig USB, and it is supposed to arrive in 20 days (less than 2$ and free shipping). Until then, must wait... I'll will tell you if it works or not.
Thanks!
saadiko said:
As I have mentioned before, my device USB only charges, there isn't communication with computer. I know how odin works, but the problem is with the USB.
I'm asking if JIG USB is the only solution, and if it will work.
Thanks for all the answers, but as I had said before... USB only charges :crying:
Click to expand...
Click to collapse
Even when you put your phone in download mode and then connect the cable?
If so, same thing will probably happen with a USB jig. They are only to force the phone to DL mode. You still have to connect it after that..
How can you tell that it charges in download mode? There is no icons for that.
tys0n said:
Even when you put your phone in download mode and then connect the cable?
If so, same thing will probably happen with a USB jig. They are only to force the phone to DL mode. You still have to connect it after that..
How can you tell that it charges in download mode? There is no icons for that.
Click to expand...
Click to collapse
Yes, when I connect the cable Odin doesn't recognize it, so I supose that only charges (it's true, perhaps it doesn't do it, there isn't any icon). It's supposed when I conncet the phone to the computer, it should pop up the "new storage" (with Odin closed), but it doesn't, only charges.
I want try USB jig, because I have read that it will put the counter to 0 (hoping is this the problem)
saadiko said:
Yes, when I connect the cable Odin doesn't recognize it, so I supose that only charges (it's true, perhaps it doesn't do it, there isn't any icon). It's supposed when I conncet the phone to the computer, it should pop up the "new storage" (with Odin closed), but it doesn't, only charges.
I want try USB jig, because I have read that it will put the counter to 0 (hoping is this the problem)
Click to expand...
Click to collapse
Counter is not set to 0 with usb jig on this device. We use triangle away for that.
If you got Kies installed, then uninstall it and install samsung drivers only.
See if there's dust in the phones usb. Take some thin plastic, but be gentle.
Just a few ideas but you've probably tried it all.
tys0n said:
Counter is not set to 0 with usb jig on this device. We use triangle away for that.
If you got Kies installed, then uninstall it and install samsung drivers only.
See if there's dust in the phones usb. Take some thin plastic, but be gentle.
Just a few ideas but you've probably tried it all.
Click to expand...
Click to collapse
It's what I supposed, but it's a way to try if USB connection works (not 100% but if it doesn't work I will know it's a hardware problem)
I've tried uninstall Kies and install samsung drivers, I've cleaned the dust in the usb, but I don't understand what I have to do with the plastic, is the same plastic to keep food fresh? must put it on the usb?
not working yet
my USB JIG has arrived and I have tried it... and still doesn't work. Yes, it starts the download mode, but when I plug the USB to try something, the computer (ODIN) doesn't do anything. I have tried with my wife's phone and it works, it's a i 8190n, too.
I'm not going to try anything more, YOU WIN THIS TIME i8190n!
Hi, I have the same problem with my GT-8190, but it happens after my phone drop onto water..
charging is work, but it say "USB device Not Recognized" when I try to connect with PC..
now i want back to stock rom, but I can't do it if my phone not recognized to PC.
Do you have an idea how to flash official stock rom without PC(Odin)?
Sorry for my English
Hello, I have an HTC one M7 (cid H3G__402) with 4.4.3 and I found no way to get it to work on any pc I try to connect it to. So, of course, there's no way to unlock the bootloader, do s-off or any of those things since fastboot does not see the device. Now, I just recently read about Sunshine and since it does not require connection to a pc, it will work to unlock the bootloader and s-off. But will it actually solve my problem?
When I go into recovery mode to try to install anything it says "check cid failed". Now I'm trying to download a stock rom to flash it and see if anything changes with that but I'm not really sure recovery mode is "ready" to read anything off the phone.
6MDMaster6 said:
Hello, I have an HTC one M7 (cid H3G__402) with 4.4.3 and I found no way to get it to work on any pc I try to connect it to. So, of course, there's no way to unlock the bootloader, do s-off or any of those things since fastboot does not see the device. Now, I just recently read about Sunshine and since it does not require connection to a pc, it will work to unlock the bootloader and s-off. But will it actually solve my problem?
When I go into recovery mode to try to install anything it says "check cid failed". Now I'm trying to download a stock rom to flash it and see if anything changes with that but I'm not really sure recovery mode is "ready" to read anything off the phone.
Click to expand...
Click to collapse
The problem with fastboot could be driver related, when you connect your phone with the usb cable does your pc detect it at all? In device manger your device should be listed "MY HTC".
When connected to fastboot mode in the bootloader does the screen show fastboot usb in red?
What about mass storage are you able to copy files to the sd card normally using mass storage on your pc?
Sunshine will work to get you Unlocked rooted and s-off, but it would be fairly pointless if you can't copy any Rom to the device.
What recovery are you using? (name and version please)
Danny201281 said:
The problem with fastboot could be driver related, when you connect your phone with the usb cable does your pc detect it at all? In device manger your device should be listed "MY HTC".
When connected to fastboot mode in the bootloader does the screen show fastboot usb in red?
Click to expand...
Click to collapse
No pc detect the device. I tried on five different computers with different OSs with either drivers installed or not. No devices detected, not even in device manager.
No, Fastboot does not show fastboot usb.
Danny201281 said:
What about mass storage are you able to copy files to the sd card normally using mass storage on your pc?
Click to expand...
Click to collapse
Nope. The HTC one does not support sd cards. I could use dropbox (or whatever) to copy the file on the device but I'm wondering if it would help.
Danny201281 said:
What recovery are you using? (name and version please)
Click to expand...
Click to collapse
The stock one that came with the system, I guess. I don't really know what name and version it is.
6MDMaster6 said:
No pc detect the device. I tried on five different computers with different OSs with either drivers installed or not. No devices detected, not even in device manager.
No, Fastboot does not show fastboot usb.
Click to expand...
Click to collapse
Might also be caused by a bad usb cable or because you are using a usb charging cable without data connections
Nope. The HTC one does not support sd cards.
Click to expand...
Click to collapse
Yes we known that:laugh:. When speaking about sd card here we are reffering to /sdcard which is your internal storage, not a "real" sd card. What he want to know is if your are able to copy files to your phone storage when its connected to your PC. Your phone should show in your "computer" folder like a usb stick for example.
The stock one that came with the system, I guess. I don't really know what name and version it is.
Click to expand...
Click to collapse
You can't flash rom with stock recovery, well you can't do anything with stock recovery except a factory reset
alray said:
Might also be caused by a bad usb cable or because you are using a usb charging cable without data connections
Click to expand...
Click to collapse
I also tried something like 5 or 6 usb cables that work with other phones too.
alray said:
Yes we known that:laugh:. When speaking about sd card here we are reffering to /sdcard which is your internal storage, not a "real" sd card. What he want to know is if your are able to copy files to your phone storage when its connected to your PC. Your phone should show in your "computer" folder like a usb stick for example.
Click to expand...
Click to collapse
Was just making sure
The phone doesn't show on the computer AT ALL. Not like a usb stick, not like a "device not recognized"... nothing. Zip. Nada.
It just charges via usb and that's it.
alray said:
You can't flash rom with stock recovery, well you can't do anything with stock recovery except a factory reset
Click to expand...
Click to collapse
That's my problem, really. Anything I try to do via recovery it just will say "check cid failed" and reboot the phone. Either "sd card" or "phone storage"
6MDMaster6 said:
I also tried something like 5 or 6 usb cables that work with other phones too.
Was just making sure
The phone doesn't show on the computer AT ALL. Not like a usb stick, not like a "device not recognized"... nothing. Zip. Nada.
It just charges via usb and that's it.
Click to expand...
Click to collapse
Looks like a defective usb port on your phone. Try to clean it
That's my problem, really. Anything I try to do via recovery it just will say "check cid failed" and reboot the phone. Either "sd card" or "phone storage"
Click to expand...
Click to collapse
You can't use the stock recovery to flash anything. Th eonly thing stock recovery can flash is OTA updates.
alray said:
Looks like a defective usb port on your phone. Try to clean it
You can't use the stock recovery to flash anything. Th eonly thing stock recovery can flash is OTA updates.
Click to expand...
Click to collapse
6MDMaster6 said:
I also tried something like 5 or 6 usb cables that work with other phones too.
Was just making sure [emoji14]
The phone doesn't show on the computer AT ALL. Not like a usb stick, not like a "device not recognized"... nothing. Zip. Nada.
It just charges via usb and that's it.
That's my problem, really. Anything I try to do via recovery it just will say "check cid failed" and reboot the phone. Either "sd card" or "phone storage"
Click to expand...
Click to collapse
Yeah I agree with @alray Unless you haven't yet tried a different USB cable. It's either the cable or the port on your device. Is it rooted? if it is you can use Rom Toolbox from the playstore to flash a custom recovery. I can provide a H3G Stock rom if you can get it on to the phone. But if its the port it wont fix it.
H3G Stock 4.4.3 Nandroid backup
https://www.androidfilehost.com/?fid=95864024717073216
Hello.I am in some kind of a trouble..I just bought a phone with firmware problems,hoping i could make it work.The problem is this,someone tried to update the firmware,unsuccesfully,and now it's stuck with no OS.I can only start recovery and bootloader.
Recovery is Teamwin 2.6.3.3.Already tried to clear cache and everything,to use an USB with OTG,but it's not recognised,ADB sideload also it's not working.
adb devices shows the phone is not connected,and FastBoot says "Waiting for device".Any idea? I've tried,read a lot,but I can't really work it out..
Also,I can't find the device in Device Manager,neither in ADB nor Fastboot.
I tried using Windows 8.1 and 7..Same deal.
Thank you!
chris_b0ss said:
Hello.I am in some kind of a trouble..I just bought a phone with firmware problems,hoping i could make it work.The problem is this,someone tried to update the firmware,unsuccesfully,and now it's stuck with no OS.I can only start recovery and bootloader.
Recovery is Teamwin 2.6.3.3.Already tried to clear cache and everything,to use an USB with OTG,but it's not recognised,ADB sideload also it's not working.
adb devices shows the phone is not connected,and FastBoot says "Waiting for device".Any idea? I've tried,read a lot,but I can't really work it out..
I tried using Windows 8.1 and 7..Same deal.
Thank you!
Click to expand...
Click to collapse
Is it a M8 or a M7, because your title says M8 but you have posted in the M7 forum.
Sorry,I am quite scared.It's M7.
chris_b0ss said:
Sorry,I am quite scared.It's M7.
Click to expand...
Click to collapse
First, follow instructions given in this post to install the latest android sdk-tools and the latest htc drivers. Also make sure you don't have HTC Sync installed on your computer.
Then connect your phone to you computer with the original cable (or any other cable already known to work for data transfer - some usb cable are only providing power), reboot the phone in bootloader mode by holding vol down and power. Make sure you see the red "fastboot usb" caption on the screen, if not use vol up/down and power to select the "fastboot" menu. Once there open a command window form the android sdk-tools folder and type "fastboot getvar all". Copy/paste the ouput of this command here (except the imei and serialno).
I've followed that,and still not working.pics attached.
It's very weird,because I was expecting for a soundfrom the Windows,like a new device connected .But ..nothing
Sent from my GT-I9100 using XDA Free mobile app
chris_b0ss said:
I've followed that,and still not working.pics attached.
It's very weird,because I was expecting for a soundfrom the Windows,like a new device connected .But ..nothing
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
With your phone in bootloader/fastboot mode, go to your windows device manager, take a screenshot of your device manager and post it here please.
The unknown device is related to my laptop.Nothing happens when I connect the phone.
chris_b0ss said:
The unknown device is related to my laptop.Nothing happens when I connect the phone.
Click to expand...
Click to collapse
Ok so its not detected at all
Might be caused by
a bad usb cable --> Try another one that you are 100% sure its working
a bad usb port on the computer (use only usb 2.0 ports btw)
a problem with the computer ---> Try another computer.
a bad usb port on the phone ---> need to replace the usb/front mic board
Might also worth to fix your laptop drivers problem. Might be causing problem if the "unknown" device is an adapter or usb controller...
Then reboot the computer.
I think we can exclude the first two,because I've tried 2 different USB cables,and with my S2 ,both of them are working,even ADB.I will try to replace the usb port from the phone,and then try again.But,do you think it will work ?
Thank you!
chris_b0ss said:
I think we can exclude the first two,because I've tried 2 different USB cables,and with my S2 ,both of them are working,even ADB.I will try to replace the usb port from the phone,and then try again.But,do you think it will work ?
Thank you!
Click to expand...
Click to collapse
Its hard to tell, there isn't any background info about what was done on that phone. The usb board is pretty cheap so it worth a try if you are 100% sure everything else is fine (computer, cables etc..)
I understand,but,I mean,as far as I know,it's not hard brick,because the phone is still booting..in some way ..so if I manage to connect it,I can flash the rom..am I right?
Sent from my GT-I9100 using XDA Free mobile app
chris_b0ss said:
I understand,but,I mean,as far as I know,it's not hard brick,because the phone is still booting..in some way ..so if I manage to connect it,I can flash the rom..am I right?
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
Normally it should be pretty easy to fix if you can get fastboot and adb connectivity. You could then update the firmware so you can flash the correct RUU to restore the phone back to stock, already made the research and all the files (firmware and ruu) you'll need are available.
alray said:
Normally it should be pretty easy to fix if you can get fastboot and adb connectivity. You could then update the firmware so you can flash the correct RUU to restore the phone back to stock, already made the research and all the files (firmware and ruu) you'll need are available.
Click to expand...
Click to collapse
Sorry for the late reply,the phone is now in service,in 1-2 days they should fix the USB board,and I will get back with more info soon.
Thank you very much for your quick answers and for taking time to help me!
Good news,I've managed to unbrick it.I asked a friend with a Mac to check it out,and his Mac recognized with no problems.Installed the Os,but still,Windows can't detect it.I've tried on 2 pc's(7 and 10) with the proper drivers.Weird..
Anyway,thank you for your time @alray !
Anyone with the same issue ? I am stuck at the bootloader since I wiped out my system image I can get to the recovery but I don't have a way to transfer new ROM since phone wont detect USB (MTP).
I didn't have any image backed to restore to. Tried OTG cable/USB nothing worked
What are my options ?
rocco24 said:
Anyone with the same issue ? I am stuck at the bootloader since I wiped out my system image I can get to the recovery but I don't have a way to transfer new ROM since phone wont detect USB (MTP).
I didn't have any image backed to restore to. Tried OTG cable/USB nothing worked
What are my options ?
Click to expand...
Click to collapse
Hi... Is data mounted and MTP enabled in TWRP?
Is your phone detected while in bootloader?
Try: fastboot devices
If phone is recognized, download stock firmware of your choice and flash it...
5.1 said:
Hi... Is data mounted and MTP enabled in TWRP?
Is your phone detected while in bootloader?
Try: fastboot devices
If phone is recognized, download stock firmware of your choice and flash it...
Click to expand...
Click to collapse
MTP is enabled but phone is not detected at all
I can access the terminal in recovery mode but it doesn't support ftp command to download any firmware.
I guess I am doomed
rocco24 said:
MTP is enabled but phone is not detected at all
I can access the terminal in recovery mode but it doesn't support ftp command to download any firmware.
I guess I am doomed
Click to expand...
Click to collapse
Wait... I don't get it...
Are you stuck in recovery? Or bootloader?
Also you can't use ftp commands either in bootloader or recovery... I suggest you start by reading this thread to learn a few basics about Android commands and how-to :
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
5.1 said:
Wait... I don't get it...
Are you stuck in recovery? Or bootloader?
Also you can't use ftp commands either in bootloader or recovery... I suggest you start by reading this thread to learn a few basics about Android commands and how-to :
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Click to expand...
Click to collapse
Sorry to confuse you I can get to the bootloader and the recovery no problem but when I try to reboot to the system it kept saying no OS installed. I don't have any ROM installed and I can't use USB cable since phone won't detect it. So I am stuck at back-end.
rocco24 said:
Sorry to confuse you I can get to the bootloader and the recovery no problem but when I try to reboot to the system it kept saying no OS installed. I don't have any ROM installed and I can't use USB cable since phone won't detect it. So I am stuck at back-end.
Click to expand...
Click to collapse
So...
What operating system is installed on your computer?
Did you already install adb/fastboot drivers?
In device manager, while being in bootloader, is your phone detected when you plug your USB cable?
Did you try different cables, USB ports?
5.1 said:
So...
What operating system is installed on your computer?
Did you already install adb/fastboot drivers?
In device manager, while being in bootloader, is your phone detected when you plug your USB cable?
Did you try different cables, USB ports?
Click to expand...
Click to collapse
I tried different cables/PCs nothing worked. I think my phone USB port is defected but what confuses me more is that it can be charged just fine but no USB connectivity
It is still under warranty but not sure if it will be honored since I have the bootloader unlocked.
rocco24 said:
Sorry to confuse you I can get to the bootloader and the recovery no problem but when I try to reboot to the system it kept saying no OS installed. I don't have any ROM installed and I can't use USB cable since phone won't detect it. So I am stuck at back-end.
Click to expand...
Click to collapse
Nothing happens in device manager when.you plug your phone? Even not recognized as an unknown device?
5.1 said:
Nothing happens in device manager when.you plug your phone? Even not recognized as an unknown device?
Click to expand...
Click to collapse
Nothing like said it is dead. I have another nexus 6 can connect easily to the PC I am pretty sure it is a phone issue.
Well, if you're 100℅ sure the USB port is damaged, there's nothing else than a repair that could bring your phone back to life... Good luck..!
5.1 said:
Well, if you're 100℅ sure the USB port is damaged, there's nothing else than a repair that could bring your phone back to life... Good luck..!
Click to expand...
Click to collapse
thanks for your time and help.
So the nexus 6 gets old now, may just check to clean your port
coremania said:
So the nexus 6 gets old now, may just check to clean your port
Click to expand...
Click to collapse
Tried that already it didn't work
Might be a driver problem.
Connect it your windows pc and check the Device Manager if it is detected as "Android" device. If so uninstall it and disconnect and reconnect it to the pc. Let windows install the MTP drivers.
aliinbox said:
Might be a driver problem.
Connect it your windows pc and check the Device Manager if it is detected as "Android" device. If so uninstall it and disconnect and reconnect it to the pc. Let windows install the MTP drivers.
Click to expand...
Click to collapse
This has already been discussed if you read the "few" previous posts ... Device isn't detected at all...