Related
Well my problem its different that the ones I've looked over the forum.
I get the cyanogenmod installed , and then I wait for almost 45 mins, with the cyanogenmod logo.
Then it suddenly comes with the new android unlock screen for like 1 second and then it begins again with the cyanogenmod.
But to resolve it, I just turn off the kindle go to teamwin boot and then just restore.
Then it becomes like factory settings..
But I can't get the cyanogenmod to work no matter what.
What I'm missing...
Did u check the cm 10.1 zip files md5 checksum before flashing it? You should always do this, you can do it in es file explorer by going to a files properties and calculating the md5. Compare it to the md5 from the post where u got it from, if its different then re-download it..
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Well I downloaded everything from this post.
http://forum.xda-developers.com/showthread.php?t=2245335
and followed the instructions...
I don't really know what's the "md5 checksum"
I only rooted and did the 2nd-bootloader + TWRP 2.6.0.0 for the Kindle Fire HD 7
from this tutorial:
http://forum.xda-developers.com/showthread.php?t=2271909
But I don't recall seeing anything related with "md5 checksum"
seekario said:
Well I downloaded everything from this post.
http://forum.xda-developers.com/showthread.php?t=2245335
and followed the instructions...
I don't really know what's the "md5 checksum"
I only rooted and did the 2nd-bootloader + TWRP 2.6.0.0 for the Kindle Fire HD 7
from this tutorial:
http://forum.xda-developers.com/showthread.php?t=2271909
But I don't recall seeing anything related with "md5 checksum"
Click to expand...
Click to collapse
Try downloading again, make sure file size is the same as the website says and md5 is the numbers in the description, just above the file or below, also try (make backup first) wipe cache, dalvik cache, data,system, flash rom , flash gapps, wipe internal, wipe dalvik, then reboot
stolen from my drunk kindle by Tapatalk 4
Well looks like I erased everything and it says I don't have a OS installed, but now the cyanogenmod zip its not in the sd card of the kindle.
So I have nothing to flash with, and it won't go to the locked screen.
But I'm stuck with the Team Win recovery project menu .
So its there anything I could do to copy the zip from my pc to the kindle so I can flash it, or even restore it so I can connect my kindle to my pc?
Thanks!
Your going to have to plug it into your PC and use adb sideload to put the zip file on it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Your going to have to plug it into your PC and use adb sideload to put the zip file on it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Well Im going to look more info about that adb sideload.
Thanks!
stunts513 said:
Your going to have to plug it into your PC and use adb sideload to put the zip file on it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Guys so sorry to bother u guys again , idk why I have such a big problem following instructions today...
I have flash my android phones before, I tho this was gonna be just like it...
But I was following this thread and nothing so far..
http://forum.xda-developers.com/showthread.php?p=37594973
if u guys got anything I could use.
Thanks!
Eh well I was hoping for more specifics, but I will tell you what I can, because I haven't ever had to use adb sideload. First go into twrp and hit advanced, them hit adb sideload and swipe to start. If your device manager doesn't have the drivers installed for your kindle when its in twrp for adb, you will need to install them, if you have installed adb drivers before and are running the latest twrp version for kindle(2.6.0.0 I believe), then it should be pretty much plug and play, but if you are running an older version of twrp you will need to force install the adb driver for that device because it didn't have the same vendor ID as the kindle like the new twrp has. Usually I think u just have hit update driver and tell it to let u browse for the driver manually, then uncheck only show compatible device drivers( it says something relatively similar to this) and look for the adb driver, can't remember if its the adb composite device or a different one. If all goes well and u haven't got driver issues, which I hope you don't because I think my tut was a bit lacking for installing drivers, then u should goto a command prompt and CD into the directory u have adb in, it would be in the android SDK, or a utility like kffa, anything that comes with adb will do. Make sure to put the zip u are side loading in the same directory as adb.exe. after that just type adb.exe sideload zipfilename.zip. that should put it on your kindle.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Well I tried that a few times already the adb sideload.
and i just loads, and does nothing, I even waited for an hour, and wouldn't finish :S
So I just think the adb sideload its not gonna do it :S
Just in case u didn't understand whats my problems.
It won't boot up because it has no OS.
So I can't put anything in the sd or backup because I accidently erased everything... even the zip from my sd(cyanogenmod )
I will have to test out adb sideload on my PC to get a better understanding of whats going on, keep in kind I use Linux and not windows, so I don't have driver issues, though I guess you are past any issues that would occur with drivers. Just to validate while I check, but u did put the file u want to side load in the same folder as the adb.exe and you are sure u ran the command correctly? Just thought I'd mention windows doesn't show file extension by default, so make sure u add the .zip to the filename if you didn't already when u type the command.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
I will have to test out adb sideload on my PC to get a better understanding of whats going on, keep in kind I use Linux and not windows, so I don't have driver issues, though I guess you are past any issues that would occur with drivers. Just to validate while I check, but u did put the file u want to side load in the same folder as the adb.exe and you are sure u ran the command correctly? Just thought I'd mention windows doesn't show file extension by default, so make sure u add the .zip to the filename if you didn't already when u type the command.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thanks for the fast response
So I'm guessing I'd have to put the" cm 10.1 in the same folder as the adb tools(where are 2 .exe fastboot and adb) just to make sure we are talking about the same thing lol.
But I think I did the command wrong.
because I got to the part of the cmd and running the adb, but then I get nothing when I try to push the file to the sd.
Just to make sure can u put the command again
this its the name of the .zip : cm-10.1-20130725-NIGHTLY-otter2
and this its where its located : C:\Users\seekario\Desktop\ADB-Tools
Thanks so much for your time also!
seekario said:
Thanks for the fast response
So I'm guessing I'd have to put the" cm 10.1 in the same folder as the adb tools(where are 2 .exe fastboot and adb) just to make sure we are talking about the same thing lol.
But I think I did the command wrong.
because I got to the part of the cmd and running the adb, but then I get nothing when I try to push the file to the sd.
Just to make sure can u put the command again
this its the name of the .zip : cm-10.1-20130725-NIGHTLY-otter2
and this its where its located : C:\Users\seekario\Desktop\ADB-Tools
Thanks so much for your time also!
Click to expand...
Click to collapse
OK so type this: adb.exe sideload cm-10.1-20130725-NIGHTLY-otter2.zip
That command should work, just to make sure I'll mention it again, before u run the command, in twrp goto advanced, adb sideload, and swipe the thing to the left, afterwards run this command.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Just download kindle fire first aide and run option to restore into stock 7.2.3 and there should be good as new( fast boot required )
stolen from my drunk kindle by Tapatalk 4
So I put the command and now it says
*cannot read 'sideload' *
any ideas ? thanks!
south956 said:
Just download kindle fire first aide and run option to restore into stock 7.2.3 and there should be good as new( fast boot required )
stolen from my drunk kindle by Tapatalk 4
Click to expand...
Click to collapse
I tried that first, and to reboot into fastboot I have to be in the menu, but I have no OS so I can't load anything, it just stays in the kindle fire logo.
I can only access to the Team Win recovery project menu(TWR v2.6) :S
Thanks anyways!
Do you have fastboot cable?
stolen from my drunk kindle by Tapatalk 4
---------- Post added at 10:39 PM ---------- Previous post was at 10:33 PM ----------
Whoa whoa whoa whoa whoa, our device is under Tate not otter2, otter2 is for original kindle fire and not the HD which explains why your stuck in bootloop, find the cm10.1 in Hash codes forum and download that one
stolen from my drunk kindle by Tapatalk 4
south956 said:
Do you have fastboot cable?
stolen from my drunk kindle by Tapatalk 4
---------- Post added at 10:39 PM ---------- Previous post was at 10:33 PM ----------
Whoa whoa whoa whoa whoa, our device is under Tate not otter2, otter2 is for original kindle fire and not the HD which explains why your stuck in bootloop, find the cm10.1 in Hash codes forum and download that one
stolen from my drunk kindle by Tapatalk 4
Click to expand...
Click to collapse
I wish I had, I only have the original cable from amazon :S
I doubt anything can be done til you have fastboot cable, I heard people try adding certain lines in cmd but most say it doesn't work, so a sure fire way would be to either make or buy fastboot cable.
stolen from my drunk kindle by Tapatalk 4
Hi everyone, today i would like to ask for your help with a pretty big problem i have with my Kindle fire HD, you see, i was updating from my current rom 7.4.4 to CM 10.2. to achieve thi i followed this tutorial http://forum.xda-developers.com/showthread.php?t=2271909 , everything was going fine until i installed 2nd-Bootloader and TWRP recovery. The problem came up here, when i realized that i forgot to move the rom and the files for google play into the SD card, now whenever i try to do this i can't seem to get my PC to recognize the Kindle with TWRP (i can browse my files and such with TWRP directly through the kindle itself) i tried to move the required file with adb and fastboot but i can't get it to work.
The kindle is rooted and running version 7.4.6 from amazon.
i have a backup for the rom and the files but i can't use fastboot.
i have a backup for each of the following files: boot0block, stock-boot, stock-recovery, stock-system
all the adb drivers and sdk are functioning perfectly.
When i connect it to my PC with windows 7 i can see the kindle recognized by the device manager but it has yellow triangle next to the icon.
i also tried using an otg cable but the kindke did not recognize it.
any and all help is appreciated, i don't want my tablet to die Dx
I've never had to do this, but in TWRP, if you go to "Advanced," there's a button labeled "ADB Sideload." Then you should be able to use ADB to sideload files onto your Kindle using the "adb sideload" command.
Example:
Code:
adb sideload name of.zip
Hope this helped
>>Sent from my homebuilt TARDIS running Android 4.3... or maybe it's a rooted Kindle Fire HD running ChameleonOS<<
Ph0enix_216 said:
I've never had to do this, but in TWRP, if you go to "Advanced," there's a button labeled "ADB Sideload." Then you should be able to use ADB to sideload files onto your Kindle using the "adb sideload" command.
Example:
Code:
adb sideload name of.zip
Hope this helped
>>Sent from my homebuilt TARDIS running Android 4.3... or maybe it's a rooted Kindle Fire HD running ChameleonOS<<
Click to expand...
Click to collapse
I tried this but the problem is that the pc not find device , it show me in device manager yellow triangle next to the icon of kindle
When i send a adb command , the adb say "Device not found"
Thanks you anyway!
Try updating the device driver for the device with mark next to it, use these drivers from this post, they should work. http://forum.xda-developers.com/showpost.php?p=44446906&postcount=9
stunts513 said:
Try updating the device driver for the device with mark next to it, use these drivers from this post, they should work. http://forum.xda-developers.com/showpost.php?p=44446906&postcount=9
Click to expand...
Click to collapse
Hi and thanks for your help now i try send the next command adb push file.zip /sdcard
but adb say this menssage:
C:\Users\Cristian>adb push file.zip /sdcard
cannot stat 'file.zip': No such file or directory
I put a rom in C:\adt-bundle-windows-x86_64-20130729\sdk\platform-tools in the same folder that adb.exe
and the name of the rom file is : file
Shur'tugal said:
Hi and thanks for your help now i try send the next command adb push file.zip /sdcard
but adb say this menssage:
C:\Users\Cristian>adb push file.zip /sdcard
cannot stat 'file.zip': No such file or directory
I put a rom in C:\adt-bundle-windows-x86_64-20130729\sdk\platform-tools in the same folder that adb.exe
and the name of the rom file is : file
Click to expand...
Click to collapse
Ok if u want to simply type file.zip u need to be CD's into the directory of where u put the ROM, but as it seems u have the SDK in your paths simply putting the ROM in c:\users\cristian should suffice. Try moving the ROM there and running the command again.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Ok if u want to simply type file.zip u need to be CD's into the directory of where u put the ROM, but as it seems u have the SDK in your paths simply putting the ROM in c:\users\cristian should suffice. Try moving the ROM there and running the command again.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thanks for your help your save my tablet
Thanks you very much
Finally i exit for this bricked
Enviado desde mi GT-I9300 usando Tapatalk 4
I have a dude im install CM 10.2 perfect , but i dont remember install de google apps as i have to do now?
Thanks
One step further
My apologies for hijacking this thread. I had made the same error as the OP. however, instead of searching here for solution, I panicked and wiped the cache and user data using the SR tool and wiped everything. Now unfortunately my kfhd tells me it can't boot, which my incompetent mind tells me is likely because I have no rom?
I've tried to use first aide to do a system recovery but I get told the files are too large and it can't do anything.... Any suggestions or thoughts from people? Appreciate any help I can get. Been up late the last 3 days trying to sort this out, while I thought I was going to provide m wife with a slick android device!!
That's odd, I wouldn't think wipe your data partition and cache would cause that to happen, then again there are some files stored under data the system uses out side of apk's so I guess that could be why. Did you get your kindle into fastboot? If you did I would suggest trying to use kfhd system restore tool if kffa didn't work.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Yes, can fast boot. Shows up when I plug in the factory cable. When I use the system restore tool, and try and do a basic recovery, it can't copy the images over as it says the files are too big.
deeman77 said:
Yes, can fast boot. Shows up when I plug in the factory cable. When I use the system restore tool, and try and do a basic recovery, it can't copy the images over as it says the files are too big.
Click to expand...
Click to collapse
All the files, or just the system.img?
soupmagnet said:
All the files, or just the system.img?
Click to expand...
Click to collapse
each one of them unfort.
Do you have twrp installed?
hloomsc some
soupmagnet said:
Do you have twrp installed?
Click to expand...
Click to collapse
I did. Not sure i do now post trying to do a wipe. Don't see any blue when I start up, just the original kindle letter coloring, after which I get a message saying it can't boot
any suggestions anyone or is my kfhd pretty much killed? there's got to be a way to load some rom on to it!!
You should be able to load the original images over fastboot, something just isn't working right. I would say its far from hard bricked, it should still be fixable, its just a matter of troubleshooting it. If you have the kindle fire system image I would try manually flashing it but you need to know what you are doing. If you CD into the SRT folder where im assuming the IMG files are in the same folder as fastboot, try running "fastboot -i 0x1949 flash system system.img" think I got the syntax right, haven't had to ever use fastboot myself, anyways if you run that what does it report back? Hopefully not the same error, or it might be something messed up with the image.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
thanks for the advice. ended up re downloading the images again and this time it worked. go figure.
back to starting again to get my custom rom on.
once i have a custom rom, guessing there are no amazon bits left in there that would cause any updates to come through right?
Thank god there isn't, I would scream if there was, just make sure to wipe system, cache, dalvik cache and do a factory reset when coming from amazon to cm based ROMs.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Thank god there isn't, I would scream if there was, just make sure to wipe system, cache, dalvik cache and do a factory reset when coming from amazon to cm based ROMs.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Good afternoon: I bricked a nice 8.9 tablet several weeks ago using ADB sideload...
I used ADB Sideload to install Gapps since I was already in TWRP and was too lazy to reboot and transfer the gapps.zip file to my tablet.
The sideload installed the gapps.zip as I expected it to and I was brought back to the main TWRP screen.
When I clicked on reboot/reboot system, the tablet started flashing the three partitions (boot, recovery and system) as I was watching. TWRP then left me at the booting screen doing nothing. I did not know why the tablet decided to flash the three main partitions but, I opted to push the power button and that was the last time I saw my tablet.....
Apparently ADB sideload is only for ROM's? I had only used it to flash ROMs prior but, I thought ADB Sideload should be able to install any properly zipped file designed to flash with TWRP?
Regards
[Q] Kindle Fire HD 7" Stuck on TWRP (2.4.4.0) - Won't Mount - BTC for quick help!
Yes I am a n00b here.
I have done many jailbreakings with no problem.
I have been using my Kindle Fire HD 7" since Feb. and reading the XDA forums and finally decided to root.
I used the newest bin4ry with no problems - http://forum.xda-developers.com/showthread.php?t=2351201
I then loaded TWRP and Kindle Fire Flash using this most recent method - http://forum.xda-developers.com/showthread.php?t=2347170
Again with no problems.
I then was going to load CyanogenMod 10.1 - http://forum.xda-developers.com/showthread.php?t=2245335
But my Kindle Fire is stuck on the TWRP screen and my PC is not showing my Kindle to drop the .zip files.
When using ADB command prompt I typed "ADB devices" and it says "List of Devices Attached - 123456789ABCDEF recovery"
So that's where I am at.
I have searched the forum many times with no luck.
Please help me load CyanogenMod or get it back to stock.
I don't care about losing apps or anything because they were all free ones.
I got a bit of BTC for anyone that can help with a quick solution.
Put the zip u wanna flash in the same directory as adb, and try this: adb push nameofzip.zip /sdcard/nameofzip.zip
That should put it on the sdcard
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Put the zip u wanna flash in the same directory as adb, and try this: adb push nameofzip.zip /sdcard/nameofzip.zip
That should put it on the sdcard
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Perfect.
Thanks.
PM me your BTC addy if you want me to buy you a beer.
stunts513 said:
Put the zip u wanna flash in the same directory as adb, and try this: adb push nameofzip.zip /sdcard/nameofzip.zip
That should put it on the sdcard
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
I am in the same situation, however I have no idea how to use ADB and which directory it is installed. I rooted my sons kindle fire HD and installed TWRP the same way, however I cannot find anything on my computer regarding an ADB directory.
Any help at all will be very appreciated.
Binaries root comes with it, try cding into that directory, my wallpaper fix in my SIG also has it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
M.Derrick said:
I am in the same situation, however I have no idea how to use ADB and which directory it is installed. I rooted my sons kindle fire HD and installed TWRP the same way, however I cannot find anything on my computer regarding an ADB directory.
Any help at all will be very appreciated.
Click to expand...
Click to collapse
Hey Mr. Derrick!
Hopefully we can get you setup using the same solution that worked for me.
ABD can be kinda confusing, especially if you are new to rooting.
(I can't post links yet so change my xx to tt)
If you want to try re-downloading it you can get it here: hxxp://developer.android.com/sdk
Are you trying to install the Cyanogen Mod 10.1 on there as well?
You will need that also in order to get it up and running.
You can download that here: hxxp://goo.im/devs/Hashcode/tate/cm10.1/cm-10.1-20130812-UNOFFICIAL-tate.zip
It helps to put all this stuff in the same folder, I just made a folder called "Kindle Stuff"
Now, go into your Kindle Stuff folder and go to adt-bundle-windows > sdk > platform-tools
Copy and paste your "cm-10.1-20130812-UNOFFICIAL-tate.zip" folder in there.
Then in a blank space in the folder hold down "Shift" and "right click"
On the list choose
"Open command window from here"
In the command window copy and paste this: adb push cm-10.1-20130812-UNOFFICIAL-tate.zip/sdcard/cm-10.1-20130812-UNOFFICIAL-tate.zip
That (should) load Cyanogenmod onto your Kindle.
Once it finishes transferring, you can click "Install" on the TWRP homescreen.
It (should) automatically load it right away, if not just scroll to the "cm-10.1-20130812-UNOFFICIAL-tate.zip" file and open it up.
I really hope that works for you, because that's what did it for me!
I'm having the same issue with being stuck on the twrp screen, but I can't get an adp connection. Im also attempting to load cm 10.1 onto my kindle fire hd 7. In case it matters my pc also says there's no drivers for the kindle (I installed the proper drivers and adp and sdk software prior to rooting and flashing twrp and they worked fine, the problem only started after installing twrp)
Try the drivers in my signature. Its probably my just an old twrp build before has code updated the vid and pid in it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
how would i install those drivers so that the kindle would use them...when i originally installed the drivers for the adp connection, it was done automatically
---------- Post added at 09:44 PM ---------- Previous post was at 09:18 PM ----------
ok the drivers work now and i have a adb connetion...thanks by the way, and now im trying to sideload the ROM file onto the kindle so i can install it with twrp. i put the folder into C:\users\joe and tried the command adb sideload filename.zip (i renamed the folder "filename") but i got an error saying error: closed
any ideas?
I don't bother with side load. Just load up twrp and run "adb push filename.zip /sdcard/filename.zip
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
thanks for your help...my kindle is now running CM 10.1
stunts513 said:
I don't bother with side load. Just load up twrp and run "adb push filename.zip /sdcard/filename.zip
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
i have a problem i was running cm12.1 on my hd 8.9 and i tried to do a factory reset from the cm os the device said going into reboot one it booted up it went to twrp but now it wont start twrp it just stays in the twrp boot screen what should i do? please help and thank you.
Hello to everyone,
I was looking how to install Amazon Store on my Kindle Fire HD 2012 running CM11, when I noticed that I have to change something in /system/build.prop
I had troubles to edit this file because root privileges, so I copied it to emulated SD, then I edited it and copy again to its original path.
It seems than anything went wrong. The tablet gets stucked with "Kindle Fire" blue logo on the screen.
Notes:
My laptop (W7) doesn't recognize the tablet. ADB drivers are correctly installed (or, at least, it seems it). It tries to install "MTP USB device" but it fails before complete setup.
How can I repair /system/build.prop?
EDIT: Nevermind, I ****ed it up.
I have made a wipe of cache, davik and system with "team Win Recovery Project" and it screwed everything. It looks like it is erased, so I'll try to install a new CM version.
--
I know that I make mistakes writing in English, I'm Spaniard.
elRufo said:
Hello to everyone,
I was looking how to install Amazon Store on my Kindle Fire HD 2012 running CM11, when I noticed that I have to change something in /system/build.prop
I had troubles to edit this file because root privileges, so I copied it to emulated SD, then I edited it and copy again to its original path.
It seems than anything went wrong. The tablet gets stucked with "Kindle Fire" blue logo on the screen.
Notes:
My laptop (W7) doesn't recognize the tablet. ADB drivers are correctly installed (or, at least, it seems it). It tries to install "MTP USB device" but it fails before complete setup.
How can I repair /system/build.prop?
EDIT: Nevermind, I ****ed it up.
I have made a wipe of cache, davik and system with "team Win Recovery Project" and it screwed everything. It looks like it is erased, so I'll try to install a new CM version.
--
I know that I make mistakes writing in English, I'm Spaniard.
Click to expand...
Click to collapse
You can ADB sideboard onto TWRP. Easier than starting over.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
LinearEquation said:
You can ADB sideboard onto TWRP. Easier than starting over.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe it's a noob question, but... how I could do that? I had tried several times to install ADB drivers (W7) and it doesn't install correctly. Installer says that it can't write 0x1949 in users/MYUSER/.android/adb_usb.ini file
elRufo said:
Maybe it's a noob question, but... how I could do that? I had tried several times to install ADB drivers (W7) and it doesn't install correctly. Installer says that it can't write 0x1949 in users/MYUSER/.android/adb_usb.ini file
Click to expand...
Click to collapse
To install the adb driver you need the drivers in my signature. I haven't seen people even messing with the adb_usb.ini file in a while. If you are trying to install it while in twrp and you still happen to see a MTP device then you will need to find a USB composite device in the device manager and if you have more than one, it's simple enough to find the right one, just right click one and goto details and then choose hardware id's, if one has a vid of 1949 then uninstall it and scan for new devices and it should pick it up correctly.
Sent from my Amazon Tate using Tapatalk
stunts513 said:
To install the adb driver you need the drivers in my signature. I haven't seen people even messing with the adb_usb.ini file in a while. If you are trying to install it while in twrp and you still happen to see a MTP device then you will need to find a USB composite device in the device manager and if you have more than one, it's simple enough to find the right one, just right click one and goto details and then choose hardware id's, if one has a vid of 1949 then uninstall it and scan for new devices and it should pick it up correctly.
Sent from my Amazon Tate using Tapatalk
Click to expand...
Click to collapse
Right Click>Install (w/ Administrator rights)
My Windows 7 (x64) says "This install metod is not valid for this .inf file"
I tried to install original ADB under Administrator account and it looks like are correctly installed, but after that, my pc detects the Kindle Fire HD on "printers/other (and a picture of a mainframe as icon)", so I don´t have access to internal storage to copy CM11 rom and gapps zip.
Note: I own a fastboot cable, I don't know if it could be usefull in this case.
You don't install my drivers like that... open the device manager and if you see a device with a triangle next to it, right click it and hit update drivers, then point it to where you extracted them and it should install.
Sent from my LG-P769 using Tapatalk
stunts513 said:
You don't install my drivers like that... open the device manager and if you see a device with a triangle next to it, right click it and hit update drivers, then point it to where you extracted them and it should install.
Sent from my LG-P769 using Tapatalk
Click to expand...
Click to collapse
Done! Thank you for your patience explaining something thousand times
I was following a guide to root my kindle fire hd and install CM11 on it. I somehow managed to transfer extracted versions of gapps and CM11 rather than the .zip versions, and didn't realize this until after I had wiped my device. I have tried using adb sideload to get them onto it, but adb doesn't recognize the device anymore. I do have a backup of the device (boot0block.img, stock-boot.img, stock-recovery.img, and stock-system.img), so if there is some way for me to restore using those I could just do that and try again. What, if anything, can I do?
Nakuh said:
I was following a guide to root my kindle fire hd and install CM11 on it. I somehow managed to transfer extracted versions of gapps and CM11 rather than the .zip versions, and didn't realize this until after I had wiped my device. I have tried using adb sideload to get them onto it, but adb doesn't recognize the device anymore. I do have a backup of the device (boot0block.img, stock-boot.img, stock-recovery.img, and stock-system.img), so if there is some way for me to restore using those I could just do that and try again. What, if anything, can I do?
Click to expand...
Click to collapse
Kindle fire HD 7in?
Sent from my XT862 using Tapatalk
sd_shadow said:
Kindle fire HD 7in?
Sent from my XT862 using Tapatalk
Click to expand...
Click to collapse
Yes.
I appear to have solved the issue I was having. I installed PdaNet and followed the prompts in installation, which found the drivers for my kindle fire 7" and installed them successfully. From there, all I had to do was sideload the ROM using cmd (the command is adb sideload [file path of the ROM, including the .zip at the end]). I can't post links because I'm new here, but a simple google search of "adb device not found" had the solution as the first result.
Nakuh said:
I appear to have solved the issue I was having. I installed PdaNet and followed the prompts in installation, which found the drivers for my kindle fire 7" and installed them successfully. From there, all I had to do was sideload the ROM using cmd (the command is adb sideload [file path of the ROM, including the .zip at the end]). I can't post links because I'm new here, but a simple google search of "adb device not found" had the solution as the first result.
Click to expand...
Click to collapse
Great, I have requested that this be moved to Kindle Fire HD 7in Q and A.