Hey, i'd like to flash a custom kernel and flash the jb/ics custom rom because i'm bored with gb. I tried nAa kernel but it doesn't work for my x8. So, what kernel do you recommend and what rom that very stable for the kernel? Thx.
Sent from my Rezound using xda premium
just try..compare each rom and kernel.. you decide it..
Sent from my E15i using Tapatalk 2
lien91 said:
just try..compare each rom and kernel.. you decide it..
Sent from my E15i using Tapatalk 2
Click to expand...
Click to collapse
Thx but I need the recommendation
Sent from my Rezound using xda premium
syahrisyadr said:
Thx but I need the recommendation
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
Go use nAa jb 05 with miniCM10
Sent from my E15i
camon dude!
lot of Best ROM here
I will stay on GB cz not eat lot of ram
but if u want try JB rom, just look at Original Android Development :good:
Cheers!
BlackRabbit1703 said:
camon dude!
lot of Best ROM here
I will stay on GB cz not eat lot of ram
but if u want try JB rom, just look at Original Android Development :good:
Cheers!
Click to expand...
Click to collapse
He is asking for kernel
Sent from my E15i
Deleted
op, when you said the jb kernel didn't work for you, what exactly do you mean? you get a soft brick? is your bootloader unlocked? please give us more info.
Just because i don't doesn't mean i can't.
Gogeta said:
Go use nAa jb 05 with miniCM10
Sent from my E15i
Click to expand...
Click to collapse
I tried nAa jb with rom-based minicm10 and it was bootlooping.
NB : I forget about the version of nAa jb kernel. I will check it on my laptop soon.
Sent from my Rezound using xda premium
cascabel said:
op, when you said the jb kernel didn't work for you, what exactly do you mean? you get a soft brick? is your bootloader unlocked? please give us more info.
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Yes, I get soft bricked. Bootlooping. I already unlocked my bootloader (10w52) I'm very curious cause it should working on my x8 too if the kernel work on another x8.
Sent from my Rezound using xda premium
BlackRabbit1703 said:
camon dude!
lot of Best ROM here
I will stay on GB cz not eat lot of ram
but if u want try JB rom, just look at Original Android Development :good:
Cheers!
Click to expand...
Click to collapse
Finally, I found indonesian user here. Lol. OoT.
Sent from my Rezound using xda premium
syahrisyadr said:
Yes, I get soft bricked. Bootlooping. I already unlocked my bootloader (10w52) I'm very curious cause it should working on my x8 too if the kernel work on another x8.
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
try this:
1. on your custom kernel, format /system /data /cache
2. flash naa's jb kernel.
3. do step one again
4. flash jb rom for that kernel.
Just because i don't doesn't mean i can't.
cascabel said:
try this:
1. on your custom kernel, format /system /data /cache
2. flash naa's jb kernel.
3. do step one again
4. flash jb rom for that kernel.
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Emm. If I do step one on stock kernel, it will work or not?
Sent from Rezound using LEUNGEUN URANG.
It will.
hai sgt.meow, how the kernel workin'?
Related
I want pure room without additions or problems to my Note
It should be "ROM" and not room. Anyways you should try "clean note".
Sent from my GT-N7000 using xda premium
ral7 said:
It should be "ROM" and not room. Anyways you should try "clean note".
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thanks for correction, but could you post the link
Use Cleanote with hydracore kernel
Sent from my GT-N7000 using xda premium
forum.xda-developers.com/showthread.php?t=1716088
This is the link of cleaNote rom
Sent from my GT-N7000 using xda premium
thanks to you guys and I hope that this rom is safe and without any problems
If you want to use Hydracore Kernel, please check with the developer first whether this is a safe / unsafe kernel (in case you want to do full wipe on your phone).
I just read 1 case saying the phone brick when wiping use the Hydracore v2 kernel.
Pls check with the developer first.
antique_sonic said:
If you want to use Hydracore Kernel, please check with the developer first whether this is a safe / unsafe kernel (in case you want to do full wipe on your phone).
I just read 1 case saying the phone brick when wiping use the Hydracore v2 kernel.
Pls check with the developer first.
Click to expand...
Click to collapse
thanks
subrban said:
thanks to you guys and I hope that this rom is safe and without any problems
Click to expand...
Click to collapse
I don't want to dampen your expectation but don't let your hopes soar high. Every Custom ROMS I know has their own bugs and kinks to be worked out on the next updates again. That's why there are always updates release on every custom ROMS out there.
+1 Cleanote ROM + HydraCore Kernel = Awesome !
The safest kernel available for the note !
Edit deleted
so we can say no rom like my need
Cm9 is your best room!
Sent from my GT-N7000 using xda app-developers app
LoVeRice said:
Cm9 is your best room!
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
well you post the link! !
[q] why my galaxy note gt-n7000 is having problem with the camera?
Everytime i shot a picture , the picture stock.! Help please
my cellphone abouts is in my signature
It's a known bug with HydraCore v7.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
It's a known bug with HydraCore v7.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
is there no way to fix it?
pedropenduko said:
is there no way to fix it?
Click to expand...
Click to collapse
Change kernel.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Change kernel.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
what do you suggest? i want one for good gaming haha
Use an older hydracore like 4.3 or notecore v14
I wouldn't know, maybe someone else can help...
Sent from my GT-N7000 using xda premium
but changing from v7 is a Lil tricky. not as easy as it is with other kernels. you need a revert zip from hydracore thread
nokiamodeln91 said:
but changing from v7 is a Lil tricky. not as easy as it is with other kernels. you need a revert zip from hydracore thread
Click to expand...
Click to collapse
how ? when i revert it what will happen it will return to stock rom?
Are you sure its the gl hydracore kernel im on v7 and my camera is ok running better than stock
Sent from my GT-N7000 using xda premium
pedropenduko said:
how ? when i revert it what will happen it will return to stock rom?
Click to expand...
Click to collapse
when you directly revert from v7, the phone will not boot properly.. so you need to use the revert zip file.. flash that first and then the new kernel.
how will I reinstall hydracore v7??
as you do any other kernel...
nokiamodeln91 said:
as you do any other kernel...
Click to expand...
Click to collapse
you said in your last last comment i need to use a revert.zip to re install it?
not to reinstall, to go back from v7 to any other kernel.
nokiamodeln91 said:
not to reinstall, to go back from v7 to any other kernel.
Click to expand...
Click to collapse
ohh how if i want to go to Philz? what will i do?
uhm like this I am currently using Hydracore v7 and i want it to change to Philz
do i need to use a specific program to do that task?
yes.. then you need to first flash the revert zip and then the philz kernel..
the zip file is in the hydracore thread.. a rapidshare link in the last 3-4 pages
nokiamodeln91 said:
yes.. then you need to first flash the revert zip and then the philz kernel..
the zip file is in the hydracore thread.. a rapidshare link in the last 3-4 pages
Click to expand...
Click to collapse
ok thank you very much
help here is this the thread ur talking about???
http://forum.xda-developers.com/showthread.php?t=1749863
Helloo Everybody..
I will be really grateful if someone found a solution to my problem...
I know that this is not a support site, but a developers world, but after searching and googling, i couldnt help my self.
Mods can close and delete this thread if they want.
My question is that if I flash a Gingerbread kernel(nAa or Alfs) on ECLAIR 2.1...wont it create problems..such as force closing or rebooting sort of problems??
Secondly I read SpydeX thread of unlocking bootloader..i got all the tools ready, but the thread doesnt mentions anything about entering into recovery via kernel on ECLAIR 2.1... the guide just tells that after flashing entr into recovery and flash the rom.
I tried this trick on my friends X8, but no success..
Thanxx in advance
If you flash a custom kernel at the eclair while you have locked bootloader,you will have bootloop(it wont boot,but you can easily fix it),if you have unlocked your bootloader it will be fine
As for your second question,you unlock your bootloader,you flash the kernel(which contain cwm),you enter recovery(cwm),and you flash the rom.
Sent from my X8 using xda premium
U mean that after i unlock my bootloader and flash the ALFS OR NAA kernel on Eclair 2.1...it will work fine???? And i can use the eclair os normally???
Sent from my X8 using xda app-developers app
HemdonG said:
U mean that after i unlock my bootloader and flash the ALFS OR NAA kernel on Eclair 2.1...it will work fine???? And i can use the eclair os normally???
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
Yep,at least gb kernels
Sent from my X8 using xda premium
afaik custom kernels will not work on stock rom.
Sent from my rooted tomato using tapatalk
HemdonG said:
U mean that after i unlock my bootloader and flash the ALFS OR NAA kernel on Eclair 2.1...it will work fine???? And i can use the eclair os normally???
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
No he's got it wrong.
1. You can't flash custom kernels on a locked rom flashtool won't allow it.
2. Flashing a custom kernel on stock 2.1 will cause it to bootloop, what you'd normally do is enter recovery and flash a rom that works with the kernel.
Sent from my GT-I9000 using xda premium
No,users have reported that custom kernels work with stock rom(I remember very clear a user who used naa kernel with stock rom)
Maybe older versions...
If I'm wrong then I apologize
Sent from my X8 using xda premium
stamatis16 said:
No,users have reported that custom kernels work with stock rom(I remember very clear a user who used naa kernel with stock rom)
Maybe older versions...
If I'm wrong then I apologize
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Trust me, no kernels will work with stock 2.1
Sent from my GT-I9000 using xda premium
stamatis16 said:
No,users have reported that custom kernels work with stock rom(I remember very clear a user who used naa kernel with stock rom)
Maybe older versions...
If I'm wrong then I apologize
Sent from my X8 using xda premium
Click to expand...
Click to collapse
When you open naa kernel thread hou are going to read: THIS IS YOUR KERNEL FOR GB/ICS/JB
Kernel for stock need to be signed by Sony
Sent from my E15i using xda premium
I have stock ICS 4.0.4 rom and I want to root
my Note and flash to Cyanogen ROM or paranoid rom.
1 question: Will I be able to flash using Philz Cwm6 Kernel, or should I use other Kernel?
2. Does a stock ICS rom is a peoblem flashing to Jelly Bean Cyanogen or is the kernel which is important for flashing?
P.S Sorry if I wrote something because I'm still noob on phone modding.
Sent from my GT-N7000 using xda app-developers app
just go to install a safe kernal here for ur ICS4.0.4 http://forum.xda-developers.com/showthread.php?t=1901191
my advise is do a backup using the safe kernal b4 flashing any roms it might help u in case something when wrong.
if u really don't know how to flash CM u can go find a rom manager it might be the easiest way for noob.
Flashing cm requires first flashing a cm 10 or 10.1 kernel, have a look in chasmodo's kernel repository in the stickies somewhere for cm based kernels.
Doesn't matter what rom you're on, you're right it's the kernel that's the important part.
Also if flashing cm base, make sure you perform full wipes before and after flash for best stability.
Sent from my GT-N7000 using xda premium
Thanks for imformation
That really helped
Sent from my GT-N7000 using xda app-developers app
ReiZona said:
Thanks for imformation
That really helped
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Use the thanks button.
Sent from my GT-N7000 using xda premium
If I flash Hydracore Kernel then will i be able to flash CM?
ReiZona said:
If I flash Hydracore Kernel then will i be able to flash CM?
Click to expand...
Click to collapse
No, you need a specific cm kernel. Otherwise you'll face boot loops.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
No, you need a specific cm kernel. Otherwise you'll face boot loops.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I just don't understand one thing. Now I'm sitting on Philz 3.99 safe Kernel and stock ICS 4.0.4 rom . If I flash CM9 Kernel from chasmodo Kernel repository then should I flash to CM ?
SpyderTracks said:
No, you need a specific cm kernel. Otherwise you'll face boot loops.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
If i flash using CM9 Kernel but on stock ICS 4.0.4 ROM, will it work?
ReiZona said:
If i flash using CM9 Kernel but on stock ICS 4.0.4 ROM, will it work?
Click to expand...
Click to collapse
You won't be able to boot into ics, but once you've flashed cm kernel, then reboot into recovery and flash CM rom and then gapps, then do 3 wipes before boot.
Sent from my GT-N7000 using xda premium
ReiZona said:
If i flash using CM9 Kernel but on stock ICS 4.0.4 ROM, will it work?
Click to expand...
Click to collapse
Philz has fixed th error 7 on the 3.99 release. So you can go ahead and do the formats and flash the cm rom. There is actually no need to flash the th cm kernel first.
I have done it myself a couple of days ago
Hi, i have a xperia x8 (10w52) with unlocked bootloader and I think I have a problem after the bootloader unlocked. So what's the problem?
My xperia won't boot into custom rom after I install the rom. I didn't get any problem about install custom rom when my bootloader is still locked. But, after I unlock the bootloader...... Another story with locked bootloader. Won't boot, stuck in sony ericsson logo (stock kernel) & nAa/oxydo (custom kernel). I follow the instruction in each cusrom thread. But it same.
Any idea?
Thx.
nb : everything's fine when it runs on stock rom and stock kernel.
Sent from Rezound using LEUNGEUN URANG.
From where/which thread did u follow to unlock your Bootloader?
Sent from my GT-I9100 using xda premium
Titan9119 said:
From where/which thread did u follow to unlock your Bootloader?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ah. unfortunately, i'm forget. But, it works fine on other x8.
Sent from Rezound using LEUNGEUN URANG.
Hmm?Did u full wipe data/cache? Does the rom supports custom kernel?
Sent from my GT-I9100 using xda premium
are you sure your bl is unlocked? because if you flashed a different kernel, se logo shouldn't appear anymore.
also, what rom+kernel combination are you trying to flash? if it's jb, you need to format system, cache and data, flash kernel, and reformat again. only after should you flash the rom.
Just because i don't doesn't mean i can't.
Titan9119 said:
Hmm?Did u full wipe data/cache? Does the rom supports custom kernel?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yap, I followed all the instruction, I tried to relock the bootloader, but it was same thing. Stuck in sony ericsson logo after I flashed the cusrom.
Sent from Rezound using LEUNGEUN URANG.
syahrisyadr said:
Yap, I followed all the instruction, I tried to relock the bootloader, but it was same thing. Stuck in sony ericsson logo after I flashed the cusrom.
Sent from Rezound using LEUNGEUN URANG.
Click to expand...
Click to collapse
What is the rom+kernel that you're flashing?
Sent from my GT-I9100 using xda premium
cascabel said:
are you sure your bl is unlocked? because if you flashed a different kernel, se logo shouldn't appear anymore.
also, what rom+kernel combination are you trying to flash? if it's jb, you need to format system, cache and data, flash kernel, and reformat again. only after should you flash the rom.
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Veryyyy sureee. I checked it with s1tool.. It was same thing when I install the custom rom. Stuck in boot. (happened in stock and custom kernel)
Like what I said, I followed all the instructions.
This is the rom & kernel that I tried but it's bootlooping.
NAa + MiniCM10
NAa + Jellyblur (nAa full support version)
NAa + JBMP
Stock Kernel + ZenceFii v14 stock
I will try to install GingerDX v30 (my old custom rom on my x8 when the bootloader still locked) with stock kernel. I will let you know what happen next
Sent from Rezound using LEUNGEUN URANG.
syahrisyadr said:
Veryyyy sureee. I checked it with s1tool.. It was same thing when I install the custom rom. Stuck in boot. (happened in stock and custom kernel)
This is the rom & kernel that I tried but it's bootlooping.
NAa + MiniCM10
NAa + Jellyblur (nAa full support version)
NAa + JBMP
Stock Kernel + ZenceFii v14 stock
I will try to install GingerDX v30 (my old custom rom on my x8 when the bootloader still locked) with stock kernel. I will let you know what happen next
Sent from Rezound using LEUNGEUN URANG.
Click to expand...
Click to collapse
no idea about zencefii but...
for jb roms, what i do is format /system /cache /data via cwm (either on stock or gb kernel), flash naa's jb kernel, then format those partitions again. then i flash minicm10. i haven't experienced bootloops by doing that. good luck in flashing gdx though. :thumbup:
Just because i don't doesn't mean i can't.
Did u flash the nAa-jb-05 or the nAa-14?
Sent from my GT-I9100 using xda premium
Titan9119 said:
Did u flash the nAa-jb-05 or the nAa-14?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
NAa jb 05 buddy
Sent from Rezound using LEUNGEUN URANG.
cascabel said:
no idea about zencefii but...
for jb roms, what i do is format /system /cache /data via cwm (either on stock or gb kernel), flash naa's jb kernel, then format those partitions again. then i flash minicm10. i haven't experienced bootloops by doing that. good luck in flashing gdx though. :thumbup:
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Thanks! But bad luck with gdx If you know what I mean. Yeah, i follow the instruction as you said. But..... Em it same. Any idea?
Sent from Rezound using LEUNGEUN URANG.
syahrisyadr said:
Thanks! But bad luck with gdx If you know what I mean. Yeah, i follow the instruction as you said. But..... Em it same. Any idea?
Sent from Rezound using LEUNGEUN URANG.
Click to expand...
Click to collapse
no idea right now. you did say gdx 30 worked when you bl was locked. i don't really know why it doesn't work now if you're using stock kernel.
i'll post again when i think of something.
Just because i don't doesn't mean i can't.
cascabel said:
no idea right now. you did say gdx 30 worked when you bl was locked. i don't really know why it doesn't work now if you're using stock kernel.
i'll post again when i think of something.
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Yes, it worked when the bl is locked. Ahhh. What I've done. But, it's better than hard bricked. Now my phone is in stock rom. Thx, buddy. Hehe
Sent from Rezound using LEUNGEUN URANG.