[Q] Need help razri dead - RAZR i Q&A, Help & Troubleshooting

Hello I really need help, I'm sorry for my english I'm Brazilian. Well here we go I have a Razr Xt890 (Bootloader Unlock + Root)
* I was doing a tutorial scripts (Tweak) and changed the "dalvik.vm.heapsize =" from 128m to 48m ... sent as the tutorial, then hung up the phone when I call him again caught on screen 'WARNING BOOTLOADER UNLOCKED' and now will not start but is dead, push the (Power and Volume -) and it reboots and comes back on the screen and remains locked. ai thought of using the RSD lite to pop another ROOM but not get the USB I put on the computer it makes noise but nothing appears not recognize, really is dead. : (
Please I need help, what can I do?

I have deleted my contribution because it doesn't have to help you.

You must release the power button instantly before(!) RAZRi finishes vibration to get into fastboot mode! Have you tried that?

As shaftenberg wrote, you didn't properly enter to fastboot.
As long you see warning "Unlocked bootloader" as long your fastboot is oki, so Razr is not dead, only rom i messed up.
To properly enter fastboot at JB bootloader you should press power button and vol down, until green light will on, then you will feel vibration and light will switch off, at this time you must very fast relase only power button!!!!!!
Dont use Lucki_X linked method, cause in some cases it may damage your phone

shaftenberg said:
You must release the power button instantly before(!) RAZRi finishes vibration to get into fastboot mode! Have you tried that?
Click to expand...
Click to collapse
Hello the power button would be the POWER?

skupi20 said:
As shaftenberg wrote, you didn't properly enter to fastboot.
As long you see warning "Unlocked bootloader" as long your fastboot is oki, so Razr is not dead, only rom i messed up.
To properly enter fastboot at JB bootloader you should press power button and vol down, until green light will on, then you will feel vibration and light will switch off, at this time you must very fast relase only power button!!!!!!
Dont use Lucki_X linked method, cause in some cases it may damage your phone
Click to expand...
Click to collapse
Jefferson Alves
Able to enter fastboot mode by Power and VOL +, and release the power, but now thanks to you guys how to do?

Grap you the Retail Brasil JB Fastboot from here
http://forum.xda-developers.com/showthread.php?p=40417328
And flash it with RSD Lite 6.1.4. There's an How To here on XdA (search for Motorola Tools)
Gesendet von meinem XT890

Related

[Q] I think I bricked my phone :( :( - PLEASE help!

Hi,
I tried the regular fastboot method to load CWM recovery.
Whenever it got to the point of loading the recovering, it would just say "flashing recovery on the device...".
Then, when restarting bootloader and clicking on "recovery", it would just shut down the phone.
I decided to experiment to try fix the issue, and I came across this post:
http://forum.xda-developers.com/showthread.php?t=1928551
I downloaded the ZIP file and I ran the root.bat
It flashed some boot images and now my phone wont start
It is stuck on the "warning bootloader unlocked screen" and will not go any further.
Please help . I'm so scared that I've bricked my phone. Is there ANYTHING I can do?
Thanks in advance for the help!
The methods u used can't brick your phone
Reboot in boot loader by pressing the power button and volume - button at the same time. Just at the moment the phone shuts-down/reboot release the power button. It will boot in boot loader. After this flash cwm or twrp again and with the volume down button go to recovery. Select recovery with the volume up key and u are done. Cwm/twrp is flashed and will boot in the recovery.
In recovery I would install the ROM from Omar. It will restore your system and boot.IMG so it will work. Don't forget to wipe data.
If this doesn't work flash the home made fast boot files somewhere in the development section
Sent from my XT890 using xda app-developers app
Hazou said:
The methods u used can't brick your phone
Reboot in boot loader by pressing the power button and volume - button at the same time. Just at the moment the phone shuts-down/reboot release the power button. It will boot in boot loader.
Click to expand...
Click to collapse
Thanks - I tried that. I do let go of the buttons as soon as it starts to reboot itself, but it doesn't start the bootloader - it still just shows the screen "warning bootloader unlocked". I can not get back into the bootloader
Do u reset the phone with the 4 buttons and just when it resets does your phone reboots immediately?
Sent from my GT-P5110 using XDA Premium HD app
Hazou said:
Do u reset the phone with the 4 buttons and just when it resets does your phone reboots immediately?
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
If I hold all 4 buttons, the screen goes blank, and the green light stays on. My PC then finds hardware called "MEDFIELD" but wont find drivers for it.
Does this help at all?
alkit said:
If I hold all 4 buttons, the screen goes blank, and the green light stays on. My PC then finds hardware called "MEDFIELD" but wont find drivers for it.
Does this help at all?
Click to expand...
Click to collapse
The above applies when connected with usb.
If I press all 4 buttons without USB connected, it just reboots and gets stuck on the "unlocked bootloader" message again
alkit said:
Then, when restarting bootloader and clicking on "recovery", it would just shut down the phone.
Click to expand...
Click to collapse
Just of curiosity - which button you used to select recovery - power button or vol.up button?
alkit said:
I do let go of the buttons as soon as it starts to reboot itself, but it doesn't start the bootloader
Click to expand...
Click to collapse
You should let go only of power button and hold vol.down button (at least for me)
If your PC finds hardware - can you do fastboot devices to check whether it is actually recognized properly?
And last thing - which method you used to load recovery (and were you on ICS\JB)? You were rooted and used automated methods or you unlocked bootloader and wanted to root afterwards (manually through fastboot)?
Divina Angelus said:
Just of curiosity - which button you used to select recovery - power button or vol.up button?
You should let go only of power button and hold vol.down button (at least for me)
If your PC finds hardware - can you do fastboot devices to check whether it is actually recognized properly?
And last thing - which method you used to load recovery (and were you on ICS\JB)? You were rooted and used automated methods or you unlocked bootloader and wanted to root afterwards (manually through fastboot)?
Click to expand...
Click to collapse
You are a GENIUS!!! A LIFE SAVER!!! I can't begin to tell you how grateful I am. BOTH of your points fixed the phone.
I could never get into recovery becuase I was pressing the power button. I could never get into fastboot becuase I was holding both the power and volume down button.
So, for anyone using a RAZR I... please note the following SIMPLE things:
1) In the bootloader menu, the power button does NOT select the option. The VOL UP button selects the option
2) To boot into BOOTLOADER : Hold both power and vol down buttons until the phone restarts, and then RELEASE the power button, while still HOLDING the volume down button! It will then load the bootloader.
Again, THANKS so so much for reviving my phone for me. I was going crazy without a phone!
alkit said:
You are a GENIUS!!! A LIFE SAVER!!! I can't begin to tell you how grateful I am. BOTH of your points fixed the phone.
I could never get into recovery becuase I was pressing the power button. I could never get into fastboot becuase I was holding both the power and volume down button.
So, for anyone using a RAZR I... please note the following SIMPLE things:
1) In the fastboot menu, the power button does NOT select the option. The VOL UP button selects the option
2) To boot into BOOTLOADER : Hold both power and vol down buttons until the phone restarts, and then RELEASE the power button, while still holding the volume down button! It will then load the bootloader.
Again, THANKS so so much for reviving my phone for me. I was going crazy without a phone!
Click to expand...
Click to collapse
I was going through everything you've faced yesterday. So yeah, glad I was of help to someone else as well)
This has never happened to me before but don't stress one bit because nothing ever permanently bad comes from this. You can forget about it being destroyed. These aren't iPhones, haha. You can get it going again pretty easy I hear. Just don't stress because there is no point and you WILL get help. Just listen to what these experienced dudes are saying and you should be back on track. Good luck!
- - - - - - - - - -
UPDATE: Nice! Glad to see you got the help you needed and everything's back on track!
Nice that it is solved. I gave u the solution on my first post, but nice that someone els did a better job in explaining it
There is almost no possibilities to brick your device if u only flash things like the boot, system, recovery or data partition. They can he solved very easy. If u flash the other partitions like the radio u can get a problem.
Sent from my XT890 using xda app-developers app
Hazou said:
Nice that it is solved. I gave u the solution on my first post, but nice that someone els did a better job in explaining it
There is almost no possibilities to brick your device if u only flash things like the boot, system, recovery or data partition. They can he solved very easy. If u flash the other partitions like the radio u can get a problem.
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
You are 100% right. I just re-read your post, and noticed that you did mention those 2 points. I must've just read over them really quickly and didn't pay attention to the details of which buttons to press. :angel:
Thanks a ton for your help! Really appreciate it! :highfive:

Warring - Bootloader Unlocked

Hello guys!!
I recived a razr i from my friend with this problem. I already try of all!! I'm tired. I already try put on sdk the commands, but the computer don't recognize!!
I need heeelp.
I already try use xfstk-dldr-solo but nothin happens! I can't enter in flashmode mode!!
Thank you
hello i have the same problem with my Razr i.
Anybody can help us ?
thanks a lot.
Mmmmhhh
You need unbrcik the Razr or you need remove the WARNING? I know only remove this in ICS
I have JB 4.1.2 and i already try to do this without succes
http://forum.xda-developers.com/showthread.php?t=2184877
As i see your phone is not bricked, its looks like you dont know how enter fastboot. It was told many times.
Its hang on warning logo cause files of rom are broken. Just enter fastboot and upload with rsd-lite correct firmware.
And for gods sake, if someone doesn't know what going on, it will be better don't give any advice.
Bricked XT890 do nothing more than blinking light. If you see any logo: warning, red, intel your phone is not bricked, AMEN!!!
Both
AlmapekeDj said:
You need unbrcik the Razr or you need remove the WARNING? I know only remove this in ICS
Click to expand...
Click to collapse
Hello,
So, i can't do nothing. To remove the waring i need go to sdk open the tools. Firts i need that the pc recognize my device. "adb shell" or adb devices, but my pc don't recognize he!!! Understand?
So, if you have somethink to help me, I will be very grateful to be helping plus several others.
Thaank you
skupi20 said:
As i see your phone is not bricked, its looks like you dont know how enter fastboot. It was told many times.
Its hang on warning logo cause files of rom are broken. Just enter fastboot and upload with rsd-lite correct firmware.
And for gods sake, if someone doesn't know what going on, it will be better don't give any advice.
Bricked XT890 do nothing more than blinking light. If you see any logo: warning, red, intel your phone is not bricked, AMEN!!!
Click to expand...
Click to collapse
Hello,
I've tried everything, I tried to do this by adb but the machine does not recognize the device. The screen does not come out of it. I can not select the fastboot opçãoo. If it were that easy, was already relieved haha
PS: The mobile is a friend of mine who was trying to get root
Thank you
patience
jonto976 said:
hello i have the same problem with my Razr i.
Anybody can help us ?
thanks a lot.
Click to expand...
Click to collapse
Hello friend,
So, i do this, and he arrived at some numbers, that i showed in the picture. But, like you sad, without sucess
I never heard, that fastboot mode was broken but it takes some timing to get into it.
When the unlocked warning appears hold all buttons pressed, when the phone turns off leave the vol+ button alone and hold vol- and power pressed. At the moment the phone vibrates, leave power button alone and only hold vol- pressed. The unlocked warning will appear again but don't stop pressing vol- cause fastboot will appear after a few seconds. Than you can leave vol- alone
That's my way to get into fastboot after having a bootloop
As we can't remove battery Motorola did something like pushing power button for long time will hard restart.
As most of phones have different method of entering to fastboot. My old xperia neo need pushing on start several times vol down for example.
On our beloved XT890 in any time, even on power on phone just pushed power and vol down and wait, phone will hard restart then you will see green led, when the light turn off as fast you can release only power button, still keep finger on vol down. After you see fastboot you can release it.
Wysyłane z mojego XT890 za pomocą Tapatalk 2
ICuaI said:
I never heard, that fastboot mode was broken but it takes some timing to get into it.
When the unlocked warning appears hold all buttons pressed, when the phone turns off leave the vol+ button alone and hol vol- and power pressed. At the moment the phone vibrates, leave power button alone and only hold vol- pressed. The unlocked warning will appear again but don't stop pressing vol- cause fastboot will appear after a few seconds. Than you can leave vol- alone
That's my way to get into fastboot after having a bootloop
Click to expand...
Click to collapse
Hello, Ok,
I will went make this. Later I back here to speak if given right, OK?
Thank you
skupi20 said:
As we can't remove battery Motorola did something like pushing power button for long time will hard restart.
As most of phones have different method of entering to fastboot. My old xperia neo need pushing on start several times vol down for example.
On our beloved XT890 in any time, even on power on phone just pushed power and vol down and wait, phone will hard restart then you will see green led, when the light turn off as fast you can release only power button, still keep finger on vol down. After you see any logo or fastboot you can release it.
Wysyłane z mojego XT890 za pomocą Tapatalk 2
Click to expand...
Click to collapse
Hello,
Thank for the reply
I'll try make this!!
Thanks so much, because you are help many people with the same problem
Thank you
Hi i have no problem to go in fastboot, but after, all options are useless. Recovery deosn't work, no access to sd card.
what can i do, you are my only hope
jonto976 said:
what can i do, you are my only hope
Click to expand...
Click to collapse
You can flash the official firmware with RSD-Lite
Finally - SOLUTION
Hello All!!
First, i want thank everybody that help me!! After 3 days continue, read and read i got!!
Fallow the steps!!!
1- The basic, Motorola Drivers and RSD 6.1.4 or 6.1.5 (Make your pc recognize your cell phone)
2- Power on the cell, when the green light turn on, release the power button and keep press volume donw until menu option arrive. Some time this can delay. But never give up
3- Enter at RSD, already on fastboot on, select your retail rom.
4 *** more important step . Go to the folder from your rom. Open de xml , one that you gonna open in RSD, and delete the codes: 1- <step operation="getvar" var="max-download-size" and <step operation="flash" partition="motobp" filename="motobp".
5 - Start the RSD and good luck!!
This was the way that i got to revive my razr i
Please, leave your ideias, suggentions bellow!! Let's help other peoples!!
Thank you so much
Great you did it I forgot to mention about correct installed drivers
Jonto, original recovery is useless. So don't enter it.
When you are in fastboot just connect phone to pc install correct drivers and use rsd-lite.
Or if you have unlocked bootloader, install fastboot adb drivers and install twc recovery with fastboot command.
Wysyłane z mojego XT890 za pomocą Tapatalk 2

Weird Softbrick

So I installed a TWRP RECOVERY a Motorola RAZR i, using the Flash Tool.
It installed but I could never access it from the POWER VOLUME UP & DOWN method.
So I had to turn the phone on and enable USB Debugging then use ADB to reboot into recovery via the Flash Tool.
Then I was working on a PORT when I flashed a ROM, it went into bootflop, now I cannot get into the BOOTLOADER at all.
It never works, it will show the normal warning sign and then just go straight to the ROM.
I tried using RSD with an SBF File but it did not work, as I have to be in fastboot and I cannot be in without going into the bootloader.
Is there no hope for this device...
I have the feeling that twrp isn't flashed right. U did use fastboot?
For the bootloop. Hold volume down the whole time when it boots/bootloops, it will boot in ap flashmode (fastboot). Maybe u need to stop pressing the button after the first restart(when holding the volume down button) at the moment u get the warning.
Easily recoverable, just need some trying with the above way.
Sent from my XT890 using xda app-developers app
My method to come into fastboot-mode while having a bootloop:
1. when in bootloop press all buttons (power, VolUp, VolDown) and keep pressed
2. when screen goes off, leave the VolUp button alone, keep VolDown and Power pressed.
3. when phone vibrates, leave power alone and keep VolDown pressed
4. the bl-unlock-warning shows up and after a few seconds you should be in fastboot-mode
5. now you can leave VolDown alone
Maybe you need some tries, cause its a question of timing, but for me it works.
Thanks...
@icual
I am very grateful for your help. Thank You ever so much. The solution worked perfectly. You saved my phone

[Q] Did I just brick my Xperia TL?

So I did a stupid thing and didn't do my homework. I flashed CM 10.2 for Xperia T (Mint) on my rooted Xperia TL but didn't unlock the bootloader first. The phone won't boot. Just a black screen. If I hold the power button, it vibrates once, but nothing comes up on the screen. No LED light indicating charging while plugged in.
Have I just destroyed the phone?
lhamilton1807 said:
So I did a stupid thing and didn't do my homework. I flashed CM 10.2 for Xperia T (Mint) on my rooted Xperia TL but didn't unlock the bootloader first. The phone won't boot. Just a black screen. If I hold the power button, it vibrates once, but nothing comes up on the screen. No LED light indicating charging while plugged in.
Have I just destroyed the phone?
Click to expand...
Click to collapse
No. A custom kernel won't work on a locked bootloader, so that is essentially your problem. Just put your phone in flash mode and use flashtool to flash a stock FTF and it should boot up just fine.
Antiga Prime said:
No. A custom kernel won't work on a locked bootloader, so that is essentially your problem. Just put your phone in flash mode and use flashtool to flash a stock FTF and it should boot up just fine.
Click to expand...
Click to collapse
Flashtool says my phone is locked and can't be updated.
lhamilton1807 said:
Flashtool says my phone is locked and can't be updated.
Click to expand...
Click to collapse
Then maybe put your phone in fastboot mode and flash the kernel first... IDK, I did that once and I'm pretty sure that's how I fixed it. With 7zip you can extract the "kernel.sin" file from the FTF, and use Flashtool in Fastboot mode to flash that kernel.
Thanks. I've been trying to put it into fastboot and can't get it to work. From what I have read, I need to hold power+volDown, right? I've held power + volUp to get it to vibrate three times, then connected it with the power & volDown buttons held and nothing - no blue light for fastboot mode. I've currently got it plugged in (using the oem Sony cable) with a rubber band around the power & volDown buttons. Maybe that'll work... I dunno. The led is just staying red, and I can't see it listed as a fastboot devices by typing "fastboot devcies" when cmd is open in the correct folder in the sdk... Any ideas on how to get this done?
Thanks for your help, everyone.
lhamilton1807 said:
Thanks. I've been trying to put it into fastboot and can't get it to work. From what I have read, I need to hold power+volDown, right? I've held power + volUp to get it to vibrate three times, then connected it with the power & volDown buttons held and nothing - no blue light for fastboot mode. I've currently got it plugged in (using the oem Sony cable) with a rubber band around the power & volDown buttons. Maybe that'll work... I dunno. The led is just staying red, and I can't see it listed as a fastboot devices by typing "fastboot devcies" when cmd is open in the correct folder in the sdk... Any ideas on how to get this done?
Thanks for your help, everyone.
Click to expand...
Click to collapse
It's a bit hard to understand what you're trying to do
Fastboot mode = just press vol.up, keep on pressing, connect USB, when you get a blue light release the vol. button
Flash mode = just press vol.down, keep on pressing, connect USB when Flashtool is ready to flash the FTF, when you get a green light release the vol. button
As you can see, you don't have to press the PWR button (only pwr + vol.up to reset, but you already know it).
Usually it's enough to flash a new FTF... I don't know why you get that error: maybe a wrong button combination or maybe you didn't install the drivers needed for flashtool.
If your battery is almost discharged, the fastboot method is good to flash only the kernel in order to recharge the battery and then flash an entire FTF.
I guess your device is ok.
Anyway, have you already seen this guide?
I'll give it a shot. I can't seem to get it into flash mode or fastboot mode, though. When I hold down the Volume up or volume down button and try to plug it in, the light stays red and the computer makes a "connect" sound (Windows 7 - rising tones), then multiple "disconnect" sounds (falling tones). The light stays red and the phone is not connected.
I'm downloading a stock firmware and flashtool and will report back when I've tried it some more.
lhamilton1807 said:
I'll give it a shot. I can't seem to get it into flash mode or fastboot mode, though. When I hold down the Volume up or volume down button and try to plug it in, the light stays red and the computer makes a "connect" sound (Windows 7 - rising tones), then multiple "disconnect" sounds (falling tones). The light stays red and the phone is not connected.
I'm downloading a stock firmware and flashtool and will report back when I've tried it some more.
Click to expand...
Click to collapse
I suggest removing the battery, if you have the chance.
Keep the battery removed and press and hold power and volume up buttons simultaneously. Then plug the phone to your computer and you'll enter fastboot mode.
I revived my XV with the same red led that way.
Had to remove the battery before it would work, tho.
Good luck bro!
Sorry it took so long to get to this. I've just been using my backup in the meantime.
I took the battery out and plugged it in like you suggested. Worked like a charm! I've got it flashed and running now. Thanks!

Anyone knows how to repair hard bricked phone?

I was flashing my phone and half way through my computer lost power. Now the phone does not start. I can't get it into fastboot, or flash mode.
Pressing 'vol up' + 'power' doesn't work either. Anyone knows how to repair a hard brick?
boringpie said:
I was flashing my phone and half way through my computer lost power. Now the phone does not start. I can't get it into fastboot, or flash mode.
Pressing 'vol up' + 'power' doesn't work either. Anyone knows how to repair a hard brick?
Click to expand...
Click to collapse
Does vol down + power work?
Does the charging animation show up?
Does the led emits a light?
At least you could say the support that your device turned of while applying a firmware update and that they need to give you a new device :silly:
MartinX3 said:
Does vol down + power work?
Does the charging animation show up?
Does the led emits a light?
At least you could say the support that your device turned of while applying a firmware update and that they need to give you a new device :silly:
Click to expand...
Click to collapse
No charging animation.
if I press vol up + power longer enough the red light will turn on, but it still can't be detected by the computer.....
btw, yesterday I updated my phone to firmware 52.0.A.8.25_R5B and install the new twrp but it was stuck in a boot loop, so I repeat this process four times and still no luck, until the fifth time my PC died on me bricking my phone........
boringpie said:
No charging animation.
if I press vol up + power longer enough the red light will turn on, but it still can't be detected by the computer.....
btw, yesterday I updated my phone to firmware 52.0.A.8.25_R5B and install the new twrp but it was stuck in a boot loop, so I repeat this process four times and still no luck, until the fifth time my PC died on me bricking my phone........
Click to expand...
Click to collapse
Did you "fastboot boot twrp" or "fastboot flash boot twrp"?
Weird, I hope the IT guys can help you.
same problem? you have solution?
Does holding volume down + power while plugging the phone into a computer show a green light?
how to repair hard bricked phone?
SOMC Flash Device show only
my Phone Model SOV37 Japan Au
i am try to Global Rom Flash Done
H8216_Customized IL_52.0.A.11.3-R2B
Sony Xperia XZ2 (SOV37 Convert To H8216 )
Bootloader Unlock Done TWRP Root Done
Phone Normally Open Global
2nd time try to Flash this file SOV37_KDDI JP_52.0.C.5.295-R13B
Flash Done but my phone hard bricked show only SOMC Flash Device.
No charging & if I press vol up + power longer enough the red light will turn on, but it still show only SOMC Flash Device. computer.
i need help Sir

Categories

Resources