Stock rom wipe? - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

I have just flashed a stock rom (odexed/xxlsz/xen/from sammobile) via Odin (yesterday), but I forgot to do a wipe. Now I am experiencing some problems with gapps etc. Can I just go to recovery and do the wipes still and will it fix the problems? Or do I have to flash the whole rom all over again?
Thanks
Sent from my GT-N7000 using xda app-developers app

Flash a safe kernel(like philz kernel) and you can do all wipes

Thatgrass said:
I have just flashed a stock rom (odexed/xxlsz/xen/from sammobile) via Odin (yesterday), but I forgot to do a wipe. Now I am experiencing some problems with gapps etc. Can I just go to recovery and do the wipes still and will it fix the problems? Or do I have to flash the whole rom all over again?
Thanks
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
DO NOT WIPE USING STOCK KERNEL!!
You should first of all install a safe kernel as mentioned.

Wipe dalvik cache and fix permissions I'd say.
sent by reversed alien technology....

Related

how to revert back to gb

im on criseklo rom and on notecore 10.6 kernel, and i did this without uaing a bloody pc nor a wifi, i wanna try cm9 since its highly customizable, is there any possibility i can revert to gb rom and kernel to flash cm9 roms without a pc,
Sent from my GT-N7000 using xda premium
As you are on a safe kernel just download cm9 and gapps put it into your sd card, reboot to recovery (cwn) wipe data/cache /dalvik cache flash cm9, then go to advanced options and reboot recovery once rebooted flash gapps and reboot system.. That's it no need to go back to gb
Sent from my GT-N7000 using xda premium
hackerpoako said:
im on criseklo rom and on notecore 10.6 kernel, and i did this without uaing a bloody pc nor a wifi, i wanna try cm9 since its highly customizable, is there any possibility i can revert to gb rom and kernel to flash cm9 roms without a pc,
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
You can use Mobile ODIN Pro for the same. It does the job and doesn't cause Triangle on boot and doesn't cause count.
Just download GB Rom from dr ketans thread or www.sammobile.com and put it in your SD Card.
Open Mobile Odin.
Select the file in the column Open the file.
And Start Flashing. Remember to check for md5 checksum before flashing if it asks and Wipe Dalvik/Cache.
Done
Now you have Stock GB Rom on your Note.
Or
You can use Abyss Redpill Recovery Original Logo.(Reboot into CWM and flash Abyss 4.2)
Reboot Recovery
Now Full Wipe.
Flash cm9
Flash Gapps
Reboot System
msedek said:
As you are on a safe kernel just download cm9 and gapps put it into your sd card, reboot to recovery (cwn) wipe data/cache /dalvik cache flash cm9, then go to advanced options and reboot recovery once rebooted flash gapps and reboot system.. That's it no need to go back to gb
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
@sahilaroa
yow ia doing this method ok?
Sent from my GT-N7000 using xda premium
hackerpoako said:
@sahilaroa
yow ia doing this method ok?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Since you are on Custom ICS Rom its safe to wipe but Using Abyss 4.2 is the best way to install cm9. I have installed cm9 from safe kernel with ICS but does not recommend you as this will mess up (probably) .
Read if this can help you
For switching your existing ROM to GB ROM
here some modification
Download Prerooted ROM
and flash using Movile odin Pro
Here is guide how to use Mobile odin
http://forum.xda-developers.com/showthread.php?t=1816158
Note : You need not to change kernel in step mentioned above guide
Go directly from where you are without doing anything.
At end you will have Rooted GB ROM + CWM without using PC Odin.
Guys is ok now to flash CM9 while in ics??? The last time i heard its dangerous.
jonpaslim said:
Guys is ok now to flash CM9 while in ics??? The last time i heard its dangerous.
Click to expand...
Click to collapse
It is still dangerous in that it's a sure brick. Need to install gb kernel with cwm to perform cm flashes, goes for cm10 also.
Sent from my GT-N7000 using xda premium

Something is wrong with my CWM

icant install anything
its just getting stuck at the installation and i have to reboot manually
what can i do?
veriosn 5.5.0.4
Try flashing a gb official rom with odin mode to revert back to stock and wipe...
Sent from my GT-N7000 using xda premium
msedek said:
Try flashing a gb official rom with odin mode to revert back to stock and wipe...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
can i do it without wiping?
i mean i have lot of apps that i dont want to erase
Hearmeman said:
can i do it without wiping?
i mean i have lot of apps that i dont want to erase
Click to expand...
Click to collapse
You will lose applications and don't forget to wipe cache/dalvik if you face any problem in you phone after installing GB rom by going it in recovery.
sahilarora2003 said:
You will lose applications and don't forget to wipe cache/dalvik if you face any problem in you phone after installing GB rom by going it in recovery.
Click to expand...
Click to collapse
Ok i wiped everything including caches
now how can i get the GB rom?
where can i download it from?
Hearmeman said:
icant install anything
its just getting stuck at the installation and i have to reboot manually
what can i do?
veriosn 5.5.0.4
Click to expand...
Click to collapse
i've been having this problem since i switch to ics.
when i try to revert back to abyss4.2 so i can try to install other ics rom, i get stucked.
what works is i try to restore my GB nandroid backup, then it reboots and hangs, i switch it off, then boot at recovery and walah!
im back to my GB cwm, then i can install abyss4.2 and proceed with ICS rom flash.
that's how i always do it, i hope someone can advise a better way..http://forum.xda-developers.com/images/smilies/redface.gif
Hearmeman said:
Ok i wiped everything including caches
now how can i get the GB rom?
where can i download it from?
Click to expand...
Click to collapse
Downlod it from here.
http://forum.xda-developers.com/showthread.php?t=1424997
easy you on speedmodkernel or stock?
anyway flash a different kernel, safe one do your stuff than flash previous back
Sent from my GT-N7000 using Tapatalk 2
Hearmeman said:
icant install anything
its just getting stuck at the installation and i have to reboot manually
what can i do?
veriosn 5.5.0.4
Click to expand...
Click to collapse
Flash stock rom using pc odin or mobile odin...
I recommend to flash ICS stock rom...
Sent from my GT-N7000 using Tapatalk 2

Complete steps on how to install Crash rom

I want to install crash rom on my gnote any one can help on how to install crash rom? I want full complete steps because I just a beginner. I already rooted my gnote, flash hydracore v3.5, backup all data and now just want try to install custom rom. Anyone can help?
Which rom you want to install???
Sent from my GT-N7000 using xda app-developers app
Delete
shivg86 said:
Which rom you want to install???
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Crash Rom http://forum.xda-developers.com/showthread.php?t=1723757
happy43ver said:
I want to install crash rom on my gnote any one can help on how to install crash rom? I want full complete steps because I just a beginner. I already rooted my gnote, flash hydracore v3.5, backup all data and now just want try to install custom rom. Anyone can help?
Click to expand...
Click to collapse
Last week I've been running Crash v8.2, it's a nice rom. This is the way I installed it:
1. Download Abyss4.2 kernel and save on sd
2. Download Crash rom file and save on sd
3. Boot in recovery mode(home+pwr+volup)
4. Install Abyss 4.2 kernel
5. Advanced > reboot recovery
6. Wipe data/factory reset
7. Install rom file
8. Reboot system
After step 3 its a good idea to do a backup(nandroid) in cwm recovery if you haven't already.
After step 7 you can install HydraCore 3.5 again if you want it back, it works fine with Crash. Im actually using 3.5oc on it.
Sent from my GT-N7000 using xda premium
opiujn said:
Last week I've been running Crash v8.2, it's a nice rom. This is the way I installed it:
1. Download Abyss4.2 kernel and save on sd
2. Download Crash rom file and save on sd
3. Boot in recovery mode(home+pwr+volup)
4. Install Abyss 4.2 kernel
5. Advanced > reboot recovery
6. Wipe data/factory reset
7. Install rom file
8. Reboot system
After step 3 its a good idea to do a backup(nandroid) in cwm recovery if you haven't already.
After step 7 you can install HydraCore 3.5 again if you want it back, it works fine with Crash. Im actually using 3.5oc on it.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
So I cannot directly flash under Hydracore kernel 3.5 must install Abyss4.2 kernel to flash that rom right? Actually why we need flash kernel any use for it? Can we flash rom without kernel?
happy43ver said:
So I cannot directly flash under Hydracore kernel 3.5 must install Abyss4.2 kernel to flash that rom right? Actually why we need flash kernel any use for it? Can we flash rom without kernel?
Click to expand...
Click to collapse
You can probably do the steps without flashing Abyss4.2 Just telling how I did it. I've made it a habit to flash Abyss4.2 before wipe since it's proved to be safe with wipes and stable with installations over a long time.
Sent from my GT-N7000 using xda premium
opiujn said:
You can probably do the steps without flashing Abyss4.2 Just telling how I did it. I've made it a habit to flash Abyss4.2 before wipe since it's proved to be safe with wipes and stable with installations over a long time.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I currently use
official ICS: 4.0.4
baseband version: N7000DXLR1
Kernel version : HydraCore v3.5
Build Number: IMM76D.DXLR5
does it safe for me to Wipe Data/Dalvik/Cache?
happy43ver said:
I currently use
official ICS: 4.0.4
baseband version: N7000DXLR1
Kernel version : HydraCore v3.5
Build Number: IMM76D.DXLR5
does it safe for me to Wipe Data/Dalvik/Cache?
Click to expand...
Click to collapse
I have read here at xda, in description for HydraCore 3.5, that it should be safe to wipe (data/dalvik/cache) on this kernel. But thats all I know =) I would like to believe it's safe when they say so. But I have not tried myself yet.
Sent from my GT-N7000 using xda premium

Flashing stock rom, what kernel, safe?

Hi so I am selling my note and need to make it stock again. I have asylum CM10 and was wondering what kerneI I have and it is safe to flash:: linux version 3.0.15-CM-g8e3d42a? Is it safe for me to flash stock 4.0.4? Do I also need to flash another kernel for stock? Big thanks from a noob.
kidio007 said:
Hi so I am selling my note and need to make it stock again. I have asylum CM10 and was wondering what kerneI I have and it is safe to flash:: linux version 3.0.15-CM-g8e3d42a? Is it safe for me to flash stock 4.0.4? Do I also need to flash another kernel for stock? Big thanks from a noob.
Click to expand...
Click to collapse
You're on a safe kernel, it should be fine to flash straight to 4.04, but you'll need to do full wipes in cwm before and after flash.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
You're on a safe kernel, it should be fine to flash straight to 4.04, but you'll need to do full wipes in cwm before and after flash.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks! So i do this before and after?
Wipe Data/factory reset
Wipe Cache
Wipe Dalvik-Cache
Wipe Battery Stats
Format /system
Overkill but that is fine...no chance of issues if u do all that
Sent from my GT-N7000 using Tapatalk 2
kidio007 said:
Thanks! So i do this before and after?
Wipe Data/factory reset
Wipe Cache
Wipe Dalvik-Cache
Wipe Battery Stats
Format /system
Click to expand...
Click to collapse
before you do that connect to PC and delete whatever you can then move to recovery
I also recommend you format your internal sdcard in recovery, after saving whatever you need. This way you ensure there's no personal data left which any app might have left.
kidio007 said:
Thanks! So i do this before and after?
Wipe Data/factory reset
Wipe Cache
Wipe Dalvik-Cache
Wipe Battery Stats
Format /system
Click to expand...
Click to collapse
Dont wipe/factory reset after u flash ICS..u will hard brick ur phone..do all the above & then flash ICS..thats all..
Ok so I downloaded the rom and followed instructions on this page: http://forum.xda-developers.com/showthread.php?t=1424997
Now my note is stuck on samsung logo, what do i do? been like it for 20 mins.
Which ROM?
what kernel do u have installed? Completely stock?
Did you use PC Odin method?
Please give every bit of info you can think of so we can help
Sent from my GT-N7000 using Tapatalk 2
asf58967 said:
Which ROM?
what kernel do u have installed? Completely stock?
Did you use PC Odin method?
Please give every bit of info you can think of so we can help
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Kernel is: linux version 3.0.15-CM-g8e3d42a
Rom i flashed: N7000XXLRI---4.0.4/12.07.17-N7000NEELP4---Download--- Nordic countries
I first went into cwm and did full wipe, then i used odin method like it said in that thread. I loaded the md5 file and put note in download mode. it said "Pass" and note rebooted.
I also now tried to flash the same rom in cwm (I put the .rar file in root of internal memory), i get an error right away says (bad) and failed. is it wrong rom?
kidio007 said:
Kernel is: linux version 3.0.15-CM-g8e3d42a
Rom i flashed: N7000XXLRI---4.0.4/12.07.17-N7000NEELP4---Download--- Nordic countries
I first went into cwm and did full wipe, then i used odin method like it said in that thread. I loaded the md5 file and put note in download mode. it said "Pass" and note rebooted.
I also now tried to flash the same rom in cwm (I put the .rar file in root of internal memory), i get an error right away says (bad) and failed. is it wrong rom?
Click to expand...
Click to collapse
Flash a safe kernel and the wipe data.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Flash a safe kernel and the wipe data.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I downloaded the hydracore kernel, but when I now try to go into cwm I get Android System Recovery, how can I flash the kernal without cwm and I cant start phone?
[/COLOR]DO THIS - it will work. Download Philz kernel (it is safe to wipe from)...it is essentially a stock kernel with cwm and removes brick bug...
You can flash it from android stock recovery.
wipe data dalvic and cache... reboot you should be good..
If you want to remove root...install mobile Odin and ref lash your stock ROM with wipe and don't check root
Sent from my GT-N7000 using Tapatalk 2
---------- Post added at 12:20 AM ---------- Previous post was at 12:15 AM ----------
NOTE- Im pretty sure flashing philz from Odin will give a yellow triangle...so flash from stock android recovery if you can. Otherwise you will have to use triangle away
Sent from my GT-N7000 using Tapatalk 2
asf58967 said:
[/COLOR]DO THIS - it will work. Download Philz kernel (it is safe to wipe from)...it is essentially a stock kernel with cwm and removes brick bug...
You can flash it from android stock recovery.
wipe data dalvic and cache... reboot you should be good..
If you want to remove root...install mobile Odin and ref lash your stock ROM with wipe and don't check root
Sent from my GT-N7000 using Tapatalk 2
---------- Post added at 12:20 AM ---------- Previous post was at 12:15 AM ----------
NOTE- Im pretty sure flashing philz from Odin will give a yellow triangle...so flash from stock android recovery if you can. Otherwise you will have to use triangle away
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I flashed philz safe kernel from stock android recovery. When I rebooteded it gets to the first samsung logo I see white lines on screen and it turns off. So cant do anything now.
Did u use the correct philz kernel for ur built number?
Sent from my GT-N7105, at the corner of this rounded earth.
Not only what antique says (which is CRUCIAL).can you boot into recovery with power volume up home?
If none of this works you are going to need to download dr.ketan's prerooted GB ROM and flash that. With PC odin..because since its GB you can do a factory reset in stock recovery and there is no risk of bricking your phone... then use mobile Odin to flash LRI
Sent from my GT-N7000 using Tapatalk 2
antique_sonic said:
Did u use the correct philz kernel for ur built number?
Sent from my GT-N7105, at the corner of this rounded earth.
Click to expand...
Click to collapse
No I just used the latest: PhilZ-cwm6 v3.65 with CWM 6.0.1.9 based recovery
On back of phone it says N7000GSMH
I can enter download mode, but not android recovery.
I have no idea what to do or what of the Philz kernal to use. :/
asf58967 said:
Not only what antique says (which is CRUCIAL).can you boot into recovery with power volume up home?
If none of this works you are going to need to download dr.ketan's prerooted GB ROM and flash that. With PC odin..because since its GB you can do a factory reset in stock recovery and there is no risk of bricking your phone... then use mobile Odin to flash LRI
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Is it the roms in STOCK ROMS THREAD saying "Older Gingerbread ROMs (Directly Rootable)
These all are stock ROMs and this can be flashed using PC odin without exclamation mark or raising flash counter"?
I am not sure about the triangle for those... can anyone else chime in on this please? Nokia spyder do u guys know?
If you want you can flash a stock kernel ICSand get recovery back..or ref lash LRI and then get the proper philz flashed through stock recovery...
I mean I have used triangle away many times without a problem...but definitely avoid the triangle if you can...
asf58967 said:
I am not sure about the triangle for those... can anyone else chime in on this please? Nokia spyder do u guys know?
If you want you can flash a stock kernel ICSand get recovery back..or ref lash LRI and then get the proper philz flashed through stock recovery...
I mean I have used triangle away many times without a problem...but definitely avoid the triangle if you can...
Click to expand...
Click to collapse
Phillz kernel won't raise counter, and yes if you need to go back to stock kernel you can just flash with pc Odin without raising counter.
Sent from my GT-N7000 using xda premium

[Q] about ROM JB Zaiben by Siauka

Hi all,
I have a problem with this ROM
http://forum.xda-developers.com/showthread.php?t=2203700
I install the .zip file with CMW.
After wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system I reboot.
And the phone does not boot.
It stops at the LG logo.
Any solutions?
I tried also with TWRP
UncleRipper said:
Hi all,
I have a problem with this ROM
http://forum.xda-developers.com/showthread.php?t=2203700
I install the .zip file with CMW.
After wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system I reboot.
And the phone does not boot.
It stops at the LG logo.
Any solutions?
I tried also with TWRP
Click to expand...
Click to collapse
After the procedures you should install, not install and after wipe data etc... etc...
Sent from my LG-P880 using xda app-developers app
Big mistake !
UncleRipper said:
Hi all,
I have a problem with this ROM
http://forum.xda-developers.com/showthread.php?t=2203700
I install the .zip file with CMW.
After wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system I reboot.
And the phone does not boot.
It stops at the LG logo.
Any solutions?
I tried also with TWRP
Click to expand...
Click to collapse
Dude 1st: format/wipe everything
2nd: install/flash rom
still nothing...
I install it again without re-flashing kdz
is it right?
or I need to flash the kdz, wipe all then install?
now I use TWRP recovery.
UncleRipper said:
still nothing...
I install it again without re-flashing kdz
is it right?
or I need to flash the kdz, wipe all then install?
now I use TWRP recovery.
Click to expand...
Click to collapse
Probably now you have some kind of tutti-frutti of files in your phone...
Better flash your phone with .kdz or other method, after that follow the tutorial.
Did you flash from ICS? You need to be on V20 (JB) before you flash it.
Sent from my LG-P880 using Tapatalk 2
exFAT said:
Did you flash from ICS? You need to be on V20 (JB) before you flash it.
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
Yes, of course I am on v20a ROM. I have unlock he bootloader and install unsecure boo and the TWRP recovery.
UncleRipper said:
Yes, of course I am on v20a ROM. I have unlock he bootloader and install unsecure boo and the TWRP recovery.
Click to expand...
Click to collapse
Oh, just realised you stated you formatted system. You're not supposed to do that since /system contains the ROM, so it wouldn't boot past kernel logo.
Sent from my LG-P880 using Tapatalk 2
R: [Q] about ROM JB Zaiben by Siauka
Then what I could do?
Now I am on v20a with TWRP installed.
I need to reboot into recovery, do a factory reset, system wipe, cache wipe, data wipe and then install?
TWRP is the same of CMW?
Thanks
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
Then what I could do?
Now I am on v20a with TWRP installed.
I need to reboot into recovery, do a factory reset, system wipe, cache wipe, data wipe and then install?
TWRP is the same of CMW?
Thanks
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
"FIRST You need:
Flash to orginal JB 4.1.2 20a
Unlock bootloader
Install CWM 6.0.2.8+unsecure boot http://forum.xda-developers.com/show....php?t=2180138
Install tutorial:
1. Place Z.0.1.zip in to your internal sdcard
2. BACKUP ALL YOUR DATA with CWM Recovery
3. In CWM Recovery make wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system
4. Flash Z.0.1.zip from sdcard
5. Done"
R: [Q] about ROM JB Zaiben by Siauka
Thanks,
but now terminal emulator says that it didn't find the files for recovery and unsecure boot
What to do?
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
Thanks,
but now terminal emulator says that it didn't find the files for recovery and unsecure boot
What to do?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Did you copy them back to internal storage after factory reset???
R: [Q] about ROM JB Zaiben by Siauka
RuedasLocas said:
Did you copy them back to internal storage after factory reset???
Click to expand...
Click to collapse
Yes
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
Yes
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
I sugest you to use adb instead of terminal.
Once that you facrtory reseted the phone, check if you didn't forgot nothing... root, etc...
Try install SuperSU if you have Superuser.
R: [Q] about ROM JB Zaiben by Siauka
Thanks
I'll report you back.
Sent from my LG-P880 using xda app-developers app
R: [Q] about ROM JB Zaiben by Siauka
hi, I'm back with another problem: how to remove some horribles lines from my screen??
they are appeared after restore from twrp recovery.
but they seems to be an hardware problem...
I don't know
the restore was needed because of another failed flash of the rom in the title of this thread...
thanks
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
hi, I'm back with another problem: how to remove some horribles lines from my screen??
they are appeared after restore from twrp recovery.
but they seems to be an hardware problem...
I don't know
the restore was needed because of another failed flash of the rom in the title of this thread...
thanks
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
If its a hardware issue you should had it before...
You tried to do a clean install?

Categories

Resources