Related
Hi everybody,
I tried yesterday to flash my phone with the new mini CM9 + nAa 04 kernel... It did not work resulting in a soft brick.
I solved this problem by flashing back to the stock rom + kernel using flashtool. My device is now working as before.
After many unfruitful research on the forum, i'm forced to ask you what wrong did I do...
My phone was (and is) configured as follow :
Kernel : stock 2.6.2.9
Rom : Android 2.1
Base Band Version : M76XX-TSNCJOLYM-53404015
Built : 2.1.1.C.0.0
Rooted
Bootloader : unlocked
Today I installed xRecovery (which is not needed if I use the Kernel E15_nAa-ics-04_2.6.29.6-nAa-ics-04).
Is it problematic if I want to use the mini CM9 rom ?
How did I do :
I started by flashing the kernel using flashtool and with the latest version kernel E15_nAa-ics-04_2.6.29.6-nAa-ics-04.
The manipulation was successful and kernel was working well.
Then, after having backed up all my settings, apps, contacts, rom and wiped off the data factory settings, I started to flash the rom with CWM (the rom had been stored before on my SD card).
Once the installation finished, the phone reboot... and reboot .... and reboot, etc...
It was only able to display the nAa kernel screen (boot loop), but nothing more.
Finally, I flashed it back to stock version to use it again... OUff
I was a bit scared by the idea of having a hard brick but finally it was just a soft brick.
What do you think about my experience ? I know many of you think that people who do not have necessary skills to do it should not do it ^^ but I want to learn and to make my phone a bit more flexible and fast.
Thank you in advance !
Nico
P'titbateau said:
Hi everybody,
I tried yesterday to flash my phone with the new mini CM9 + nAa 04 kernel... It did not work resulting in a soft brick.
I solved this problem by flashing back to the stock rom + kernel using flashtool. My device is now working as before.
After many unfruitful research on the forum, i'm forced to ask you what wrong did I do...
My phone was (and is) configured as follow :
Kernel : stock 2.6.2.9
Rom : Android 2.1
Base Band Version : M76XX-TSNCJOLYM-53404015
Built : 2.1.1.C.0.0
Rooted
Bootloader : unlocked
Today I installed xRecovery (which is not needed if I use the Kernel E15_nAa-ics-04_2.6.29.6-nAa-ics-04).
Is it problematic if I want to use the mini CM9 rom ?
How did I do :
I started by flashing the kernel using flashtool and with the latest version kernel E15_nAa-ics-04_2.6.29.6-nAa-ics-04.
The manipulation was successful and kernel was working well.
Then, after having backed up all my settings, apps, contacts, rom and wiped off the data factory settings, I started to flash the rom with CWM (the rom had been stored before on my SD card).
Once the installation finished, the phone reboot... and reboot .... and reboot, etc...
It was only able to display the nAa kernel screen (boot loop), but nothing more.
Finally, I flashed it back to stock version to use it again... OUff
I was a bit scared by the idea of having a hard brick but finally it was just a soft brick.
What do you think about my experience ? I know many of you think that people who do not have necessary skills to do it should not do it ^^ but I want to learn and to make my phone a bit more flexible and fast.
Thank you in advance !
Nico
Click to expand...
Click to collapse
Your hardware and software seems alright to me.
Steps: Don't bother about xRecovery. From stock 2.1...
Root again
Flash nAa-ics kernel
Install MiniCM9 and Gapps from first post of MiniCM9 thread
FULL WIPE -- YOU MUST DO THIS
WIPE DALVIK-CACHE TOO
Reboot and have fun
Sent from my X8 using Tapatalk 2
Flash the latest baseband ans try again
Sent from my E15 using Tapatalk 2
Full Wipe will solve the problem.
Sent from my E15i using xda app-developers app
Hi,
Thanks for your replies.
So I don't understand what was wrong as I completely wiped the system prior to flash the Rom.
I proceeded exactly like that :
1.Wipe data factory
2.Wipe cache
3.Wipe dalvik-cache
4.Format system
5.Format cache
6.Format data
7.Rom installation
8.Flash Gapps
I think I have done all the necessary steps to make it working ...
I was maybe not enough patient after installation ?
I'm going to try again today (now I know how to recover from a soft brick ).
Thank you all again.
P'titbateau said:
Hi,
Thanks for your replies.
So I don't understand what was wrong as I completely wiped the system prior to flash the Rom.
I proceeded exactly like that :
1.Wipe data factory
2.Wipe cache
3.Wipe dalvik-cache
4.Format system
5.Format cache
6.Format data
7.Rom installation
8.Flash Gapps
I think I have done all the necessary steps to make it working ...
I was maybe not enough patient after installation ?
I'm going to try again today (now I know how to recover from a soft brick ).
Thank you all again.
Click to expand...
Click to collapse
Good job dude!
just try and try lolZ
maybe you miss something like flash or root..
libera powaemm
It works ! My phone is now booting and I see the CM9 blue droid :highfive:
Special thanks to developers who allow us to have better software !
And thank you for the support you brought me.
congratulation!
P'titbateau said:
It works ! My phone is now booting and I see the CM9 blue droid :highfive:
Special thanks to developers who allow us to have better software !
And thank you for the support you brought me.
Click to expand...
Click to collapse
well well!
enjoy it! :laugh::laugh:
having the same problem
P'titbateau said:
It works ! My phone is now booting and I see the CM9 blue droid :highfive:
Special thanks to developers who allow us to have better software !
And thank you for the support you brought me.
Click to expand...
Click to collapse
So, what step u miss? I also having the same problem. Can tell me your steps? dying for CM9 in my X8 too T-T
slyzerx said:
So, what step u miss? I also having the same problem. Can tell me your steps? dying for CM9 in my X8 too T-T
Click to expand...
Click to collapse
just do what spyder-x said dude!
:laugh::laugh:
Same problem... when i try to install it again I get an error and it says my device is 16i insted of 15i ...
Then I had to flash different rom 3 times to get it working...
Didn't wipe cashe and it worked : )
first instal minicm 3.0.4
after that install minicm 3.0.5(or any nightlie) without any wiping!.
Hy everybody,
I have got a big problem with my i9000: it doesn't start up very properly i mean it takes a lot to start the S logo animation, the animation is very slow (really low fps) and it usually stuck at the end of the animation (only once i managed to arrive to the menu where you have to choose the language but the touchscreen was not responding). Even CWM recovery is slow! There is a lag while choosing the options. I also tried to reflash using stock Samsung ROMS such as XXJPU and XXJW7 but i get the same issue. Also tried to install custom ROM via CWM, i get the speed back but touch doesn't work! I have already searched on the site for this issue and got a thread that had exactly the same problem but didn't manged to get out from this situation (here is the thread http://forum.xda-developers.com/showthread.php?t=1422634, it's exactly the same issue!).
I have been flashing and repearing android devices for years and this is the first time i meet this kind of issue! Maybe it is a bootloader problem or motherboard, but i ask you experts before getting in troubles =)
Sorry for my bad english :victory:
Cheers :laugh:
I think it is a hardware problem mate(since you flashed too many roms...)
Rooting wont help you too so...
Even if you dont have warranty give it for repairing..
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Uhm i don t have warranty anymore but i'm able to disassembly and replace any piece i need. Hope it is not a motherboard prolem, but i can t image something different...
NotoriuStyle™ said:
Uhm i don t have warranty anymore but i'm able to disassembly and replace any piece i need. Hope it is not a motherboard prolem, but i can t image something different...
Click to expand...
Click to collapse
First pull out everything, Ext SD card, Sim Card, power up after a few min of pressing power button..get into CWM recovery and format SD card, everything and wipe... flash a rescue kit from My Android Collection, link below
If you cannot format Internal SD card in recovery use a Format tool from My Android collections link below to format it from PC
xsenman said:
First pull out everything, Ext SD card, Sim Card, power up after a few min of pressing power button..get into CWM recovery and format SD card, everything and wipe... flash a rescue kit from My Android Collection, link below
If you cannot format Internal SD card in recovery use a Format tool from My Android collections link below to format it from PC
Click to expand...
Click to collapse
When you say format everything do you mean format /boot too ? Thank u for your help =]
NotoriuStyle™ said:
When you say format everything do you mean format /boot too ? Thank u for your help =]
Click to expand...
Click to collapse
can be done, but If you don't have boot loader on the ROM , you will have problem, so avoid it , for now
xsenman said:
First pull out everything, Ext SD card, Sim Card, power up after a few min of pressing power button..get into CWM recovery and format SD card, everything and wipe... flash a rescue kit from My Android Collection, link below
If you cannot format Internal SD card in recovery use a Format tool from My Android collections link below to format it from PC
Click to expand...
Click to collapse
I did everything and than flashed "i9000 Rescue Darky's ROM Resurrection edition" but with no result, even the robotic voice of Darky's ROM is laggy!! Trying other rescue kit and will let you know
NotoriuStyle™ said:
I did everything and than flashed "i9000 Rescue Darky's ROM Resurrection edition" but with no result, even the robotic voice of Darky's ROM is laggy!! Trying other rescue kit and will let you know
Click to expand...
Click to collapse
remember to do full wipes /factory reset before and after flashing the ROM and Internal SD card must be formatted
xsenman said:
remember to do full wipes /factory reset before and after flashing the ROM and Internal SD card must be formatted
Click to expand...
Click to collapse
Yes i always wipe data, wipe cache, wipe dalvik and wipe battery stats. Tried even GB Flash Kit and Rescue Kit for i9000 using heimdall packed but nothing. Boot animation is always slow and after 1 hour, after getting loaded, touch doesn't work =(
Nothing ... tried everything excpet formatting /boot. Will i risk to brick my device if i choose that option ?
NotoriuStyle™ said:
Nothing ... tried everything excpet formatting /boot. Will i risk to brick my device if i choose that option ?
Click to expand...
Click to collapse
Nope, but you must not try to reboot after formatting it, . You need to power down, do a battery pull and flash a ROM package with boot loader for phone to function
xsenman said:
Nope, but you must not try to reboot after formatting it, . You need to power down, do a battery pull and flash a ROM package with boot loader for phone to function
Click to expand...
Click to collapse
I've done 3 wipes then the 5 formats (boot too) then while still in recovery flash Elite's JB RC 12.1 rom .. if problems then it's deff a hardware issue
Sent from my GT-I9300 using xda premium
jj92942000 said:
I've done 3 wipes then the 5 formats (boot too) then while still in recovery flash Elite's JB RC 12.1 rom .. if problems then it's deff a hardware issue
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Nothing =( every rom i flash via CWM gives speed back but touch doesn't work =S
NotoriuStyle™ said:
Nothing =( every rom i flash via CWM gives speed back but touch doesn't work =S
Click to expand...
Click to collapse
Then it's hardware .. any gb rom gives you touch?
Sent from my GT-I9300 using xda premium
jj92942000 said:
Then it's hardware .. any gb rom gives you touch?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Uhm every rom i tried via CWM, and even the stock rom when it gets loaded, doesn't give me a working touchscreen. This problem happened last month too and after flashing a lot of roms i managed to solve it in the end, but i was just lucky because i didn't know what the device had and i solved just flashing random ROMS and getting solved with XXJW7. That's why i'm not so sure it is a hardware problem =(
NotoriuStyle™ said:
Uhm every rom i tried via CWM, and even the stock rom when it gets loaded, doesn't give me a working touchscreen. This problem happened last month too and after flashing a lot of roms i managed to solve it in the end, but i was just lucky because i didn't know what the device had and i solved just flashing random ROMS and getting solved with XXJW7. That's why i'm not so sure it is a hardware problem =(
Click to expand...
Click to collapse
Try Elite JB RC12.1, if working on jw7, do a android backup, then you'll have to flash JVU 1st, if touch screen works then it'll work with the JB rom, here's a trick, instructions are there but do this. Backup everything to pc, take out sdcard, before flash jvu, do 3 wipes, data, cache, dalvik, then go to usb mount, format 5 items there, boot, data, cache, system, sdcard ( last wipes everything). Now do 3 wipes again, yes again, flash JVU, root, transfer Rom to sdcard, 3 wipes, do usb mount, then 4 formats (not sdcard), 3 wipes again, flash JB rom. If bootloop, no bigger it just flashed kernel, take battery out, wait back in recovery flash Rom. You'll be on JB.
Sent from my GT-I9300 using xda premium
dreamer94 said:
I think it is a hardware problem mate(since you flashed too many roms...)
Rooting wont help you too so...
Even if you dont have warranty give it for repairing..
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
Flashing your phone multiple times, does not make it slow. I have flash my phone almost every day, to check out new roms that are released every day and my phone hasn't slowed down a bit
---------- Post added at 04:16 PM ---------- Previous post was at 04:10 PM ----------
NotoriuStyle™ said:
Hy everybody,
I have got a big problem with my i9000: it doesn't start up very properly i mean it takes a lot to start the S logo animation, the animation is very slow (really low fps) and it usually stuck at the end of the animation (only once i managed to arrive to the menu where you have to choose the language but the touchscreen was not responding). Even CWM recovery is slow! There is a lag while choosing the options. I also tried to reflash using stock Samsung ROMS such as XXJPU and XXJW7 but i get the same issue. Also tried to install custom ROM via CWM, i get the speed back but touch doesn't work! I have already searched on the site for this issue and got a thread that had exactly the same problem but didn't manged to get out from this situation (here is the thread http://forum.xda-developers.com/showthread.php?t=1422634, it's exactly the same issue!).
I have been flashing and repearing android devices for years and this is the first time i meet this kind of issue! Maybe it is a bootloader problem or motherboard, but i ask you experts before getting in troubles =)
Sorry for my bad english :victory:
Cheers :laugh:
Click to expand...
Click to collapse
Why dont you try flashing your original firmware via Odin with "repartition" ticked. Once that is done, let your phone boot and see if there's and lag. If lag still persists, go to CMW, format system, boot and data and restart your phone and then check again
Touchscreen problem
NotoriuStyle™ said:
Hy everybody,
I have got a big problem with my i9000: it doesn't start up very properly i mean it takes a lot to start the S logo animation, the animation is very slow (really low fps) and it usually stuck at the end of the animation (only once i managed to arrive to the menu where you have to choose the language but the touchscreen was not responding). Even CWM recovery is slow! There is a lag while choosing the options. I also tried to reflash using stock Samsung ROMS such as XXJPU and XXJW7 but i get the same issue. Also tried to install custom ROM via CWM, i get the speed back but touch doesn't work! I have already searched on the site for this issue and got a thread that had exactly the same problem but didn't manged to get out from this situation (here is the thread http://forum.xda-developers.com/showthread.php?t=1422634, it's exactly the same issue!).
I have been flashing and repearing android devices for years and this is the first time i meet this kind of issue! Maybe it is a bootloader problem or motherboard, but i ask you experts before getting in troubles =)
Sorry for my bad english :victory:
Cheers :laugh:
Click to expand...
Click to collapse
Hey!! I tried various ROM combinations and it worked for a few months. Although even after a few days, the problem would reappear and I was forced to flash again(it started working after flashing about 30-50 ROMs). Finally, a month back, I came across the same problem again but this time, nothing worked. After hitting my head on the wall for a month, I finally gave it to the Samsung ppl and they figured that the problem was with the touchscreen!!(zoinks!!) They will replace the touchscreen and it would cost me $145(8,000INR , expired warranty). They'll return it in 4 days. I'll post more when I get my SGS back.
Hmm, looks to me, you must have flashed something wrong/flashing process goes wrong. I would suggest this 'solution':
1. Flash a new recovery system. I suggest the latest TWRP recovery or flash the latest CWM. To me, CWM has given me lots of problems. You can flash it through computer or through CWM using their flashable zip.
2. Once then, wipe everything! Data, cache, dalvik cache.
3. Next, format the system! If you formatted system, you will lose your current rom. Meaning the phone will not boot up until you install/flash a ROM.
4.Install necessary stuff like Google Apps
Done! Things should be working right now. I had problems like you, my phone sometimes takes 2-5 minutes to boot.
I'm using the Samsung Galaxy S Plus I9001. So, I flashed Acro86's ICS rom. Super smooth.
Hope I helped you!
Sent from my GT-I9001 using xda app-developers app
Hi, I have exactly the same problems.
I guess it's also touch error, I already changed it once and after the year and then started having problems as it was pressed alone, stuck all the time and stopped working. As I was reading and testing, I think I'll buy again the touch.
From Argentina.
Regards.
Hello, since I don't really like my custom rom (remics 1.4) I would like to install back my stock rom (normally the latest gingerbread since I couldn't do any update). But on sammobile I can't find any roms for my country, I'm from belgium. My phone isn't simlocked, I don't know if it has any use to know that?
Btw, my phone is a galaxy s plus (GT-i9001)
Sorry for the double post
abdelbachir said:
Btw, my phone is a galaxy s plus (GT-i9001)
Sorry for the double post
Click to expand...
Click to collapse
Here is a collection of an official Samsung released Roms:
Tutorial how to flash them HERE.
Thanks man, that's really helpful. So I can flash any of those roms without worying about being belgian or anything?
Should i format my phone before flashing those roms?
From my experience you should do a wipe/factory reset before Odin the stock Rom.
I have Odin a stock Rom without wipe and it didn't boot so I cf-root, wipe from recovery and booted.
Sent from my GT-I9100 using xda app-developers app
Ok, so if I understand i should do : Wipe Data, Wipe Cache, Wipe Dalvik Cache and hop, I turn off my phone, go into download mode and flash the stock rom immediatly?
abdelbachir said:
Ok, so if I understand i should do : Wipe Data, Wipe Cache, Wipe Dalvik Cache and hop, I turn off my phone, go into download mode and flash the stock rom immediatly?
Click to expand...
Click to collapse
Exactly!:laugh:
Thanks man, you're a beast, really fast answer
sorry to bother you a bit more, but I prefer to be cautious with all of this, these roms, more precisely the XXKPU one (last in the list) is I think from poland? Does it have any importance? Since I am belgian, i need the french language haha
Oi, guys, I really need help please!! I did wipe data/factory reset in clockworkmod, then i closed my phone and flashed the stock rom (XXKPU) with Odin. But now my phone isn't booting! Or more precisely, It's just the sequence with the "S" appearing that comes over and over again!! What did I do wrong and what can I do please??
abdelbachir said:
Oi, guys, I really need help please!! I did wipe data/factory reset in clockworkmod, then i closed my phone and flashed the stock rom (XXKPU) with Odin. But now my phone isn't booting! Or more precisely, It's just the sequence with the "S" appearing that comes over and over again!! What did I do wrong and what can I do please??
Click to expand...
Click to collapse
Boot into cwm and either wipe data again or your are going to have to flash the stock again. I have had to do that in the past
Sent From My YP-G1 running ICS build 3.5
I tried booting in cwm but I can't, failed like 5 times. A few tries, I got an android robot with some sort of opened box next to him.
abdelbachir said:
I tried booting in cwm but I can't, failed like 5 times. A few tries, I got an android robot with some sort of opened box next to him.
Click to expand...
Click to collapse
This is your WIKI http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 it contains everything you need to help you, get a better understanding of your phone
1) 19001 uses Odin 4.43
2) need AriesVe.ops file for flashing
3) IF CWM failed flash CWM 6.0
4) If boot failed flash a i9001 boot loader ( look in My Android collections , link below or use your WIKI)
Thanks a lot man, flashed the cwm in the phone, did a wipe data/factory reset and it works like a charm now. I'll defenitly do a bit of reading to understand my phone a looot better!
Hi,
I was redirected to this part of the forum. A friend of mine rooted my samsung mobile Galaxy S I9000 with a android 2.2 version. I cannot contact him anymore to help me with the update and I am really a newbie in this rooting world. So, I am coming on this forum to have some advice. I read information on rooting your device, in which everything is explained very well, but could not find information on how to update once a device was rooted (probably I did not search in the right place). What I did so far is:
1) Taking backup of my pics (by manually drag and drop the folder on my pc), SMS and call logs (with sms backup + app), syncronized my contacts with gmail so that I can recover them later on and backup the music folder. I installed backup Titanium to back up my apps on my SD card.
But now, I am stuck with some questions (could you guide me where to find the information?):
1) Which most recent version of Android is supported on the device I have? Which version will work best?
2) Is there important information that I forgot to back up? + I have a problem with the backup Titanium app. It could reach my root in the beginning, but then the Superuser app updated the binary and from then on my titanium app got stuck when getting access to the root. Any idea how to solve this? Install an older version of the bin.file? How to do that exactly? thanks! => I could fix this problem by installing an older version of superuser in CW recovery. If others have problems with this issue, I can provide help from now on
3) Is there a guide with step by step procedure on which files I have to download on my pc and which procedure to follow? Or could you advice me some useful links?
thanks!
1) there is android 4.2.2 available for this amazing device
2) you propably forgot to backup efs folder
3)
- 1) follow this guide to get android 2.3.6 to your device: http://www.darkyrom.com/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
- 2) follow this guide to get android 4.2.2 (cm 10.1) to your device after: http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
- 3) now you can flash most of the roms you find in i9000 android development forum. i personally use slimrom
copy /efs! backup ur imei n md5 in efs first! copy da whole efs file! or do nandroid backup.
READ N FOLLOW CAREFULLY here
http://forum.xda-developers.com/showthread.php?t=2149455
considering u already done flashing Sammy n CF
prepare for ROM & kernel(optional) hunt! go to dev section and choose which JB u wanted.download it together with cm9.1.0 n copy to root of internal sd.
n make sure to flash cm9.1.0 stable from cyanogenmod website (galaxymtd) first from 2.3.6, first flash will bootloop, go back to recovery with 3 combo button. flash again n dont leave recovery.
after done flashing twice (if flash ended too quick, then flash again). direct flash 4.1/4.2 chosen rom, twice (first flash will come up with error, juz ignore it flash again (bootloop) recovery again n flash again
Sent from my GT-I9000 using xda premium
A bit off topic, but i didnt want to start a new thread for that...
My question is: is there an android 4.0 version with full touchwiz?
I mean the whole tweaks as slide the contact to message/call and so on
I only foubd CM 9 based ROMs which are themed to look like touchwiz and had the launcher...but i miss the sms app interface, smilies, slide to call things
Is there a port from the SGS2?
Greets Vauvenal7
Sent from my SGS i9000
Vauvenal7 said:
A bit off topic, but i didnt want to start a new thread for that...
My question is: is there an android 4.0 version with full touchwiz?
I mean the whole tweaks as slide the contact to message/call and so on
I only foubd CM 9 based ROMs which are themed to look like touchwiz and had the launcher...but i miss the sms app interface, smilies, slide to call things
Is there a port from the SGS2?
Greets Vauvenal7
Sent from my SGS i9000
Click to expand...
Click to collapse
maybe nope, but try mod urself by searching on theme n app section
Sent from my GT-I9000 using xda premium
Thanks guys!! Will have a look at your suggestions! I guess both explanations are more or less equivalent !! Right?
mogwai123 said:
Thanks guys!! Will have a look at your suggestions! I guess both explanations are more or less equivalent !! Right?
Click to expand...
Click to collapse
yap, its da same, but do some reading first
Sent from my GT-I9000 using xda premium
when I copy my efs folder, I see that it is empty. any idea? I should not proceed further? What should I do?
UPDATE: phone still finds my IMEI number when dialing *#06#
if ur imei intact, then leave it, i dont know which ROM ur using but try to see /efs with option show hidden in rooted file explorer
Sent from my GT-I9000 using xda premium
I followed the guide you mentioned here:
http://forum.xda-developers.com/show....php?t=2149455
in which they install that JVU ROM... then they say at the end that you have to unmount SD card (but that option was gray in my case) and wipe the USB storage and then reboot in recovery and do those 4 wipes, what I did, and then he mentioned that you could install your custom ROM, so I put the version of slimrom 4.2.2 on my sd card and launched it for installation.
However, the procedure started, but after a few seconds already my phone rebooted and now it is stuck at the logo of Semaphore...
What did I wrong? And what should I do?
mogwai123 said:
I followed the guide you mentioned here:
http://forum.xda-developers.com/show....php?t=2149455
in which they install that JVU ROM... then they say at the end that you have to unmount SD card (but that option was gray in my case) and wipe the USB storage and then reboot in recovery and do those 4 wipes, what I did, and then he mentioned that you could install your custom ROM, so I put the version of slimrom 4.2.2 on my sd card and launched it for installation.
However, the procedure started, but after a few seconds already my phone rebooted and now it is stuck at the logo of Semaphore...
What did I wrong? And what should I do?
Click to expand...
Click to collapse
Should I shut down my phone and try to put it in download mode again to put the JVU rom on it again via odin? is that the best strategy? Or should I do something else? and if that would work, what is then the best procedure to avoid such situations again?
nope, u did rite, but also wrong, ok, read carefully here....
flashing for upgrade is easy if u follow carefully, when in GB, after flashing CF ROOT, flashing to 4.0 (cm9) first (take da zip from cyanogenmod website) but luckily ur on 2.3.6 JVU (if u follow da link i gave), so it will be safe (safe procedure will be GB-ICS-JB), first flash will bootloop, second flash (sometimes) will occur error n third flash will succeed, which means u hav to flash twice or thrice or maybe 4 times! if its bootloop, go to recovery back by 3 button combo (its da matter of when u release da combo button, release it rite after u see da first white bootsplash)
bootloop cause by changing da partition tp ext4, its common
but if u already try to reach recovery n failed most times, u need to flash back firmware n cf root.
Sent from my GT-I9000 using xda premium
compacity said:
nope, u did rite, but also wrong, ok, read carefully here....
flashing for upgrade is easy if u follow carefully, when in GB, after flashing CF ROOT, flashing to 4.0 (cm9) first (take da zip from cyanogenmod website) but luckily ur on 2.3.6 JVU (if u follow da link i gave), so it will be safe (safe procedure will be GB-ICS-JB), first flash will bootloop, second flash (sometimes) will occur error n third flash will succeed, which means u hav to flash twice or thrice or maybe 4 times! if its bootloop, go to recovery back by 3 button combo (its da matter of when u release da combo button, release it rite after u see da first white bootsplash)
bootloop cause by changing da partition tp ext4, its common
but if u already try to reach recovery n failed most times, u need to flash back firmware n cf root.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Ok, thanks!!!! this worked!!! I justed flashed cm9 and it works. So, if I understand well now, I can just return in recovery mode and install from zip from sd card to cm10 and then for instance to slimrom? Or between 'two' flashes, I need to follow the last part of the procedure in the link you gave me? So:
"Now, what I do now is go into :
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Enable USB Debugging > Plug in Phone
Window should open up showing your phone Directory..
Copy over your ROM that you want
Shut Down Phone
Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)
Data / Factory Reset
Cache Partition
Go to Advanced > OK
Dalvik Cache
Battery Stats
Go Back > OK
To move Up or Down > Use the Left Side Volume Rocker Switches with Menu to OK Action
Install your Custom ROM from Zip Card that you want..."
OR: can I just go to recovery mode and do install from zip without doing that procedure with "wipe" etc?
Just to know, as I am just a newbie in these things!!! But I want to thank you once again for the clear explanations and the good help!!!!
juz flash mate , its easy, da important thing is to follow da sequence, thats all, juz flash, wiping cache or resetting juz for changing ROM. not upgrading
juz FLASH it
GB-ICS (twice)(do not leave recovery after second flash)-(any custom JB ROM u choose(twice or thrice))(make sure u already put da zip file in internalsd). dont need any wiping.
but FLASH AT UR OWN RISK,remember that.
n yes, recovery need hardbutton except TWRP recovery.
Sent from my GT-I9000 using xda premium
---------- Post added at 10:57 AM ---------- Previous post was at 10:34 AM ----------
here info
updating ROM from firmware (juz flash)
changing from custom ROM to any custom ROM (wipe ALL cache, factory reset, wipe dalvik n mount system n format system)
changing/flashing inbetween custom kernel (wipe cache n wipe dalvik cache)
fone slowing down (reboot or fix permission)
changing/flashing/applying tweak (wipe dalvik cache)
Sent from my GT-I9000 using xda premium
compacity said:
juz flash mate , its easy, da important thing is to follow da sequence, thats all, juz flash, wiping cache or resetting juz for changing ROM. not upgrading
juz FLASH it
GB-ICS (twice)(do not leave recovery after second flash)-(any custom JB ROM u choose(twice or thrice))(make sure u already put da zip file in internalsd). dont need any wiping.
but FLASH AT UR OWN RISK,remember that.
n yes, recovery need hardbutton except TWRP recovery.
Sent from my GT-I9000 using xda premium
---------- Post added at 10:57 AM ---------- Previous post was at 10:34 AM ----------
here info
updating ROM from firmware (juz flash)
changing from custom ROM to any custom ROM (wipe ALL cache, factory reset, wipe dalvik n mount system n format system)
changing/flashing inbetween custom kernel (wipe cache n wipe dalvik cache)
fone slowing down (reboot or fix permission)
changing/flashing/applying tweak (wipe dalvik cache)
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Thanks!!!! Just one small question. I just flashed CM10 in recovery mode and first flash gave error, second went well. Then while still being in recovery mode I directly flashed slimrom and that went well from the first time. Do you always flash a second time to make sure that things went well or this is ok then?
mogwai123 said:
Thanks!!!! Just one small question. I just flashed CM10 in recovery mode and first flash gave error, second went well. Then while still being in recovery mode I directly flashed slimrom and that went well from the first time. Do you always flash a second time to make sure that things went well or this is ok then?
Click to expand...
Click to collapse
as i already said, flash more than 2 times when upgrading, juz upgrading process. GB-ICS-JB (CM7-CM9-CM10/10.1) is upgrading process.
changing ROM not necessarily need double flashing, but u can do it if ur not satisfy whether da ROM already flashed or not
Sent from my GT-I9000 using xda premium
ok, thanks!!! no, everything is working fine with this slimrom, except for google play that does not seem to open once I install it. It opens and closes directly... but I guess there are persons that had the same problem. will have to check the forum for a solution
mogwai123 said:
ok, thanks!!! no, everything is working fine with this slimrom, except for google play that does not seem to open once I install it. It opens and closes directly... but I guess there are persons that had the same problem. will have to check the forum for a solution
Click to expand...
Click to collapse
Hmmm, is probably because I get this error when starting slimrom: invalid IMEI number...I flashed it a second time, but it gave me the same error...
Which gapps have you flashed? Slimbean needs a special package, you find it under slimroms.net.
Sent from my GT-I9000 using xda app-developers app
wget21 said:
Which gapps have you flashed? Slimbean needs a special package, you find it under slimroms.net.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I will have a look there for that google play problem.
More problematic is that problem of IMEI. When I flashed from CM 9 to CM10 I did not do that wipe of cache and data as suggested above (the reply came later on), and then I flashed slimrom. That I forgot to wipe between CM9 and CM10, can that be the cause of wrong IMEI now? Is the solution now, to wipe cache and data, to flash again CM 10 and to flash then slimrom again?
Or should I just leave everything like that and do a recovery of my efs folder? If yes, any link for this?
last week i tried in flash cm10 on my galaxy advance and then i lagged alot
so i flash to cm11 but i got boot loop:crying::crying:
last time i installed the cm11 it booted succesfully
jyling said:
last week i tried in flash cm10 on my galaxy advance and then i lagged alot
so i flash to cm11 but i got boot loop:crying::crying:
last time i installed the cm11 it booted succesfully
Click to expand...
Click to collapse
As far as i remember, you have to format /preload too. You did it?
Force said:
As far as i remember, you have to format /preload too. You did it?
Click to expand...
Click to collapse
Did you mean wipe data or format the whole phone
Sent from my GT-I9070 using XDA Free mobile app
jyling said:
Did you mean wipe data or format the whole phone
Sent from my GT-I9070 using XDA Free mobile app
Click to expand...
Click to collapse
Go in recovery, wipe data and cache, then go to "mounts and storage" and format /preload. If it fail to format it, then unmount /preload and try to format it again and flash cm11.
Did you try this?
Go To Download Mode,
Flash Your Mobile Back To 4.1.2 make sure you repartition )
Root it , & then install CWM,
Format system, cache, data, dalvik
Go to advanced format, & then format everything except SD card & USB Storage.
& then install ROM )
It would defo work, sometimes your data remains in your mobile, which makes error )
If need any other help,
Feel free to PM me )
Force said:
Go in recovery, wipe data and cache, then go to "mounts and storage" and format /preload. If it fail to format it, then unmount /preload and try to format it again and flash cm11.
Did you try this?
Click to expand...
Click to collapse
sorry for the late rely,well i will try this after i finish downloading cm11 on my galaxy advance
DaniShabbir said:
Go To Download Mode,
Flash Your Mobile Back To 4.1.2 make sure you repartition )
Root it , & then install CWM,
Format system, cache, data, dalvik
Go to advanced format, & then format everything except SD card & USB Storage.
& then install ROM )
It would defo work, sometimes your data remains in your mobile, which makes error )
If need any other help,
Feel free to PM me )
Click to expand...
Click to collapse
i dont know man, i dont feel like to redo everything.i will try this if i have no option
flashing completed i need to wait for cm11 to boot
YES it finaly boot.
thanks Force,you save my day and i just realize i forgot to flash gapps:silly:.
btw i am happy that i dont need to roll back to 4.1.2 and root and.....
Thanks a million.
and i think this thread is useless now and i dont know how to remove thread
can you told me how to ?:silly::silly:
jyling said:
YES it finaly boot.
thanks Force,you save my day and i just realize i forgot to flash gapps:silly:.
btw i am happy that i dont need to roll back to 4.1.2 and root and.....
Thanks a million.
and i think this thread is useless now and i dont know how to remove thread
can you told me how to ?:silly::silly:
Click to expand...
Click to collapse
I'm happy to hear that you solved your problem
You can't remove the thread, but you can report it to an moderator, but don't do it. Maybe there are people who will have same problem and may find this thread.
Hello guys, I need help. My phone (samsung galaxy s advance) just goes to the boot menu every time i start it up. I was installing a cm-12.1 janice when this happened. I tried to restore my back up but it says "md5 mismatch" please help me fix my phone. :crying:
"
Newbie009 said:
Hello guys, I need help. My phone (samsung galaxy s advance) just goes to the boot menu every time i start it up. I was installing a cm-12.1 janice when this happened. I tried to restore my back up but it says "md5 mismatch" please help me fix my phone. :crying:
"
Click to expand...
Click to collapse
Md5 mismatch mean that the file is corrupted. Search on google for " md5 checker" and check the cm12 size and compare it to original md5. Then try to flash it again (repeating the correct flashing procedure, wrote in cm12 thread) , or if you want to go to stock jb 4.1.2 use ODIN program to do that, there are guides in general section of our phone forum, i don't have much time to write it or to search it and share it, but you can find it for sure.