Hi,
I'm currently trying to use adb to push some data into my phone but i always get "error: closed". I'm using windows 7 x64 and im running it from cmd.
Almost everything i tried using adb (push, shell, remount) returns this. I've searched over the forums and tried "adb devices" as well to see if my phone is connected, but what is different from the others is i am getting
List of devices attached
XXXXXX host
instead of what most other people got
List of devices attached
XXXXXX device
Is this a problem? What am i missing? Thanks a lot for ur time in reading this
Try:
Code:
adb usb
then
Code:
adb devices
or
Code:
adb kill-server
then
Code:
adb start-server
then
Code:
adb devices
Guich said:
Try:
Code:
adb usb
then
Code:
adb devices
or
Code:
adb kill-server
then
Code:
adb start-server
then
Code:
adb devices
Click to expand...
Click to collapse
Thank you! Although after doing these commands it still returned error:closed it listed my device as being in sideload mode so all sideload commands worked after that including sideloading a rom .zip
Did you update the SDK Manager??? Try updating that, my ADB problem were gone after i updated them.....
xlxcrossing said:
Thank you! Although after doing these commands it still returned error:closed it listed my device as being in sideload mode so all sideload commands worked after that including sideloading a rom .zip
Click to expand...
Click to collapse
I've got the same situation with "error closed" message. I ran the suggestions above but am still getting the error message.... Thoughts?
jflora1 said:
I've got the same situation with "error closed" message. I ran the suggestions above but am still getting the error message.... Thoughts?
Click to expand...
Click to collapse
Try to download this, un-zip and try the tips with this
Guich said:
Try to download this, un-zip and try the tips with this
Click to expand...
Click to collapse
I downloaded the zip but haven't had any success, still getting an error:closed message
ozo012 said:
I downloaded the zip but haven't had any success, still getting an error:closed message
Click to expand...
Click to collapse
which recovery are you on? (name and version number please)
nkk71 said:
which recovery are you on? (name and version number please)
Click to expand...
Click to collapse
This is actually the only place I've found that might have had a solution to my problem (different device: Nexus 7, Stock 4.3 JWR66Y, unrooted, I'm attempting to sideload the 4.4 update but continually get this error:closed message.
ozo012 said:
This is actually the only place I've found that might have had a solution to my problem (different device: Nexus 7, Stock 4.3 JWR66Y, unrooted, I'm attempting to sideload the 4.4 update but continually get this error:closed message.
Click to expand...
Click to collapse
isnt "error closed" something to do with out of date adb?
ozo012 said:
This is actually the only place I've found that might have had a solution to my problem (different device: Nexus 7, Stock 4.3 JWR66Y, unrooted, I'm attempting to sideload the 4.4 update but continually get this error:closed message.
Click to expand...
Click to collapse
Some people had solved the issue with the command:
Code:
adb usb
and after a reboot of device.
But seems don't work for all.
nkk71 said:
isnt "error closed" something to do with out of date adb?
Click to expand...
Click to collapse
Umh, no, i don' think
Guich said:
Some people had solved the issue with the command:
Code:
adb usb
and after a reboot of device.
But seems don't work for all.
Umh, no, i don' think
Click to expand...
Click to collapse
I haven't tried rebooting the device seems to be the only thing I left out.
I was having the same problems. Couldn't sideload. When I would run "adb devices" , my device would be listed. If I ran "adb usb" I would get "error: closed" . The sideload command would just bring up a list of commands. This may help someone, I installed a new version of adb. Not sure if I can post links but the file name was adb-setup-1.1.exe. This installs the needed files, the installer didn't notify me where the files were installed but they installed right to my C:\ drive. This seemed to eliminate the problem for me. I did a lot of searching and couldn't find anyone with this specific issue, so if anyone finds themselves with this problem give this a try.
worked for me
i had the same problem
i coulnt send anyfile to my htc one but after updating plate-form tools and replacing the old adb and fastboot files with the new ones
i entered the commend adb sideload rom.zip and it started sending the rom
and the phone was on twrp recovery-advanced-sideload
morheb said:
i had the same problem
i coulnt send anyfile to my htc one but after updating plate-form tools and replacing the old adb and fastboot files with the new ones
i entered the commend adb sideload rom.zip and it started sending the rom
and the phone was on twrp recovery-advanced-sideload
Click to expand...
Click to collapse
Yay. That Just worked for me using Crunchbang Debian. Thanks morheb that little tweak of using 'sideload' was the key
Can anyone help me push vold.fstab file with adb?
Stock Recovery on mediatek platform. with adb i got same error as this thread. Error:closed
KoolAidBigMan said:
I was having the same problems. Couldn't sideload. When I would run "adb devices" , my device would be listed. If I ran "adb usb" I would get "error: closed" . The sideload command would just bring up a list of commands. This may help someone, I installed a new version of adb. Not sure if I can post links but the file name was adb-setup-1.1.exe. This installs the needed files, the installer didn't notify me where the files were installed but they installed right to my C:\ drive. This seemed to eliminate the problem for me. I did a lot of searching and couldn't find anyone with this specific issue, so if anyone finds themselves with this problem give this a try.
Click to expand...
Click to collapse
Perfect - worked for me - exact same issue - adb wasnt recognising my phone was in sideload and sideload command wouldnt work but push would - plus getting error closed message on adb usb command. Googled the above adb file, downloaded, 15 second install and now sideloading is working on my SG2 with CWM recovery 6.0.2.9 (kitkat). I was obviously using an outdated ADB driver (1.0.29).
Thanks a lot KoolAidBigMan !! Big up...
Jimbo
EDIT : Spoke too soon - now getting another error when trying to sideload.. will google it.. failed to write data 'protocol fault (no status)'
EDIT : Sorted. Ended up getting round it by pushing the files instead - found instructions on Cyanogenmod forums. Thanks once again.
http://forum.xda-developers.com/sho...wQFjAA&usg=AFQjCNGgPmMne0aYCd9RojZZhy89cQjnCw
Try this
Sent from my C6916 using XDA Free mobile app
Link not working?? Im ok now anyway.. Time to test my screen casting to my Chromecast.. :fingers-crossed:
mtk6572 have same error
I have same error.. but I know that my phone's usb debugging is not enable.. so I got this error:close..
My phone is on bootloop so I can't enable the usb debugging.. Is there any way to enable the usb debugging using adb commands? I trying to push the framework-res.apk on my phone.. because it is the cause of the bootloop.
i'm a nood
Related
My friend has HTC One. He wiped all the data on SD including the ROM files and One is not booting right now. It's rooted and has Trickdroid's 4.2.2 based ROM.
We tried lots of things so far;
- Pushing files via ADB
Trying ADB, it says device not found, no matter we did we couldn't manage the pc to recognize the phone.
- Mounting SD via CWM
I have HOX, when I enter CWM I can see the option to mount the SD but on One there's no line like this.
- Activating Sideload on TWRP
We also flashed TWRP and tried to use Sideload feature but when we tried to activate it, it says something like "unable to mount .."
- Flashing the RUU
And lastly we tried to flash the RUU, we checked the CID and it says o2___001 and there's no RUU for it.
I just saw that One could be S-OFF and got Super-CID, but to do that again, I have to pull and push some files via ADB so we stuck here.
Could you plese help me on this?
Try cwm recovery it has sideload feature I was in a similar situation once before and it worked using cwm recovery
Also. If you want to try use adb again, try to plug in your device and then wait for few seconds before running a push command. It worth mentioning that once adb fail one time, it is not going to work again by repeating the same push command. Once it fails run this command: adb kill-server
This command will stop the previous failed process after killing the server then try to push again
NiMH_999 said:
Try cwm recovery it has sideload feature I was in a similar situation once before and it worked using cwm recovery
Also. If you want to try use adb again, try to plug in your device and then wait for few seconds before running a push command. It worth mentioning that once adb fail one time, it is not going to work again by repeating the same push command. Once it fails run this command: adb kill-server
This command will stop the previous failed process after killing the server then try to push again
Click to expand...
Click to collapse
We tried a different computer and solved the ADB problem, then I did just like you told and it's OK now.
Thank you.
You're welcome. glad it's all all OK for you
Boot TWRP, then select “Mount”, then select only “Data” and connect your HTC One to your computer.
Considering you have adb.exe (Windows, part of fastboot.zip) or on Linux:
cd Downloads\ROM.zip
adb push ROM.zip /sdcard/
Replace ROM.zip with the ROM filename you copied earlier to Downloads (or any other) folder, then install the ROM.
It should be nearly same running CWM recovery. Hope that helps.
Same problem as you --> fixed
I was able to recognize my device in device manager when using fastboot, but wasnt able to recognize the device as soon as I switched to recovery mode.
I found this universal driver which would recognize both: download.clockworkmod.[com]/test/UniversalAdbDriverSetup6.msi
(remove brackets from [.com] above)
I was now able to use adb sideload to transfer the .zip to my sd card and flash my new rom.
Hope this helps anyone else.
If you found that adb worked from a different machine, you might check whether you had any tethering drivers installed (eg EasyTether) on the machine that was not able to see the phone via adb. I found that they interfered with adb's operation on my Macbook previously; it was maddening.
woraz said:
My friend has HTC One. He wiped all the data on SD including the ROM files and One is not booting right now. It's rooted and has Trickdroid's 4.2.2 based ROM.
We tried lots of things so far;
- Pushing files via ADB
Trying ADB, it says device not found, no matter we did we couldn't manage the pc to recognize the phone.
- Mounting SD via CWM
I have HOX, when I enter CWM I can see the option to mount the SD but on One there's no line like this.
- Activating Sideload on TWRP
We also flashed TWRP and tried to use Sideload feature but when we tried to activate it, it says something like "unable to mount .."
- Flashing the RUU
And lastly we tried to flash the RUU, we checked the CID and it says o2___001 and there's no RUU for it.
I just saw that One could be S-OFF and got Super-CID, but to do that again, I have to pull and push some files via ADB so we stuck here.
Could you plese help me on this?
Click to expand...
Click to collapse
if you have problems always use Hasoon All-In-One_Kit for HTC
Am having the same issues, have tried everything I can think off and everything google has suggested. I'm beyond stuck any and all help would be greatly appreciated
my bad exp
I don't know if that help anyone but I had the problem "device not found" when I was trying to side load with HTC AIO KIT.
I removed all my drivers for htc from the control panel and installed only the htc driver (binary100100.googlecode.[com]/files/HTCDriver3.0.0.007.exe). Then the adb started to work. (after the htc drivers install you need to restart your OS)
When I installed new ROM and reboot the device it showed me the screen with the developer's rom. I thought that I failed and flashed new rom then suddenly the new ROM after one minute started to work. So looks like that I should wait long enough for the first and may be it would also starts to work.
Was he by chance having issues charging his phone before he wiped it?
Myself and my brother both a had issues with the USB port going. Couldn't charge while phone was on. PC wouldn't pick it up so no adb. However was able to pickup fastboot and charge while in fastboot mode.
If that's the case you could try running a zip in oemRUU mode just to get an os on there.
Is he soff?
Sent from my HTC One using xda premium
makkasi said:
I don't know if that help anyone but I had the problem "device not found" when I was trying to side load with HTC AIO KIT.
I removed all my drivers for htc from the control panel and installed only the htc driver (binary100100.googlecode.[com]/files/HTCDriver3.0.0.007.exe). Then the adb started to work. (after the htc drivers install you need to restart your OS)
When I installed new ROM and reboot the device it showed me the screen with the developer's rom. I thought that I failed and flashed new rom then suddenly the new ROM after one minute started to work. So looks like that I should wait long enough for the first and may be it would also starts to work.
Click to expand...
Click to collapse
This worked for me. Thanks!!
Once I removed all the extra crap from control panel and used the latest I was able to do adb devices successfully from bootloader / recovery.
I was just having the same problem on the new LG G2 (D803). It was perplexing because the computer *bleeped* every time it attached so I knew that it saw something. Based on the tips here I went to the Device Manager and sure enough there it was... I reinstalled the drivers inside device manager and then I got an easy adb hit on the phone... hmmm :fingers-crossed:
EazyVG said:
Boot TWRP, then select “Mount”, then select only “Data” and connect your HTC One to your computer.
Considering you have adb.exe (Windows, part of fastboot.zip) or on Linux:
cd Downloads\ROM.zip
adb push ROM.zip /sdcard/
Replace ROM.zip with the ROM filename you copied earlier to Downloads (or any other) folder, then install the ROM.
It should be nearly same running CWM recovery. Hope that helps.
Click to expand...
Click to collapse
flsurf7 said:
I was able to recognize my device in device manager when using fastboot, but wasnt able to recognize the device as soon as I switched to recovery mode.
I found this universal driver which would recognize both: download.clockworkmod.[com]/test/UniversalAdbDriverSetup6.msi
(remove brackets from [.com] above)
I was now able to use adb sideload to transfer the .zip to my sd card and flash my new rom.
Hope this helps anyone else.
Click to expand...
Click to collapse
This worked for my Nexus 4 and TWRP installed. Running the ADB sideload commad from TWRP did not, and just trying to push or sideload from command prompt on PC (Win 8) did not. I had drivers for Nexus 4 recognition installed previously from Nexus Root Toolkit which worked when the Nexus 4 was booted into system, but did not recognize it when wiped and/or in recovery mode. Loading these drivers the Nexus 4 was recognized in recovery mode, and I was able to push the ROM and install using TWRP.
Thanks much!
:good:
timekills said:
This worked for my Nexus 4 and TWRP installed. Running the ADB sideload commad from TWRP did not, and just trying to push or sideload from command prompt on PC (Win 8) did not. I had drivers for Nexus 4 recognition installed previously from Nexus Root Toolkit which worked when the Nexus 4 was booted into system, but did not recognize it when wiped and/or in recovery mode. Loading these drivers the Nexus 4 was recognized in recovery mode, and I was able to push the ROM and install using TWRP.
Thanks much!
:good:
Click to expand...
Click to collapse
Man, I just wanted to say thank you. I've been stuck on this for hours and this did the trick!
Worked
flsurf7 said:
I was able to recognize my device in device manager when using fastboot, but wasnt able to recognize the device as soon as I switched to recovery mode.
I found this universal driver which would recognize both: download.clockworkmod.[com]/test/UniversalAdbDriverSetup6.msi
(remove brackets from [.com] above)
I was now able to use adb sideload to transfer the .zip to my sd card and flash my new rom.
Hope this helps anyone else.
Click to expand...
Click to collapse
the drivers mentioned here worked for me.
Device : HTC One M7
Recovery : TWRP
Thanks
Thank you so much! This universal driver worked for me! (HTC One Mini with TWRP, soft-bricked)
NiMH_999 said:
Try cwm recovery it has sideload feature I was in a similar situation once before and it worked using cwm recovery
Also. If you want to try use adb again, try to plug in your device and then wait for few seconds before running a push command. It worth mentioning that once adb fail one time, it is not going to work again by repeating the same push command. Once it fails run this command: adb kill-server
This command will stop the previous failed process after killing the server then try to push again
Click to expand...
Click to collapse
Years later, thank you sir, for helping a noob with "adb kill-server"
I was so freaked as to why TWRP wasn't sideloading but PhilZ was.
flsurf7 said:
I was able to recognize my device in device manager when using fastboot, but wasnt able to recognize the device as soon as I switched to recovery mode.
I found this universal driver which would recognize both: download.clockworkmod.[com]/test/UniversalAdbDriverSetup6.msi
(remove brackets from [.com] above)
I was now able to use adb sideload to transfer the .zip to my sd card and flash my new rom.
Hope this helps anyone else.
Click to expand...
Click to collapse
ADB didn't recognize my Xperia SP in Clockworkmod. That driver worked like a charm Thank you!
This worked for me...
flsurf7 said:
I was able to recognize my device in device manager when using fastboot, but wasnt able to recognize the device as soon as I switched to recovery mode.
I found this universal driver which would recognize both: download.clockworkmod.[com]/test/UniversalAdbDriverSetup6.msi
(remove brackets from [.com] above)
I was now able to use adb sideload to transfer the .zip to my sd card and flash my new rom.
Hope this helps anyone else.
Click to expand...
Click to collapse
Thank you so much for this. This really helped me out.
My phone recently lost its ROM, and is now stuck on the 'HTC quietly beautiful screen', i did manage to get it into clock work mode recovery and have a backup of my old rom on a usb, however, when i plug in the USB before starting the phone it doesn't show up, meaning i cannot restore. Please help! Any help or feedback is much appreciated! :good:
When you're in recovery, you have to use the command:
Code:
adb devices
for see your phone.
After use adb command like push or sideload for put a rom into the phone
Guich said:
When you're in recovery, you have to use the command:
Code:
adb devices
for see your phone.
After use adb command like push or sideload for put a rom into the phone
Click to expand...
Click to collapse
Thanks, but how would i do that on a mac?
That's why I have parallels!
I had this problem the other day and I fixed it by going to data/media in recovery and installing an old Rom that was downloaded. I could then restore afterwards.
Sent from the one and only HTC One
Shadow Samurai said:
That's why I have parallels!
I had this problem the other day and I fixed it by going to data/media in recovery and installing an old Rom that was downloaded. I could then restore afterwards.
Sent from the one and only HTC One
Click to expand...
Click to collapse
Yes, but i cannot copy anything to my device, and when i attempt to use adb, it says "error: device not found"
Check the thread in my signature
Sent from my HTC One using xda app-developers app
MacHackz said:
Check the thread in my signature
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
i have tried following your help, but when i type ./adb devices it says
"adb server is out of date. killing...
* daemon started successfully *
List of devices attached
"
it doesn't show the serial code
g4slyness said:
i have tried following your help, but when i type ./adb devices it says
"adb server is out of date. killing...
* daemon started successfully *
List of devices attached
"
it doesn't show the serial code
Click to expand...
Click to collapse
Is it turned on booted into Android, or in recovery?
MacHackz said:
Is it turned on booted into Android, or in recovery?
Click to expand...
Click to collapse
Yes
You have the latest adb binaries installed??
Sent from One with Tapa4 Beta
Guich said:
You have the latest adb binaries installed??
Sent from One with Tapa4 Beta
Click to expand...
Click to collapse
I am not sure what a binary is (HTC One is my first android phone so I'm new) but if it is the recovery mode, i only installed it about a week ago
Do you have the folder containing the adb and fastboot files on your Desktop? And do you have HTC Sync installed? It will load the proper drivers, even though I heard it may not be necessary anyway.
This method worked for me on my Mac. It is very simple using Terminal.
You don't actually have to download the whole SDK, just download the file attached in the threat, which is this http://forum.xda-developers.com/attachment.php?attachmentid=1396782&d=1350078941
Place it on your Desktop, and follow the instructions. After ADB successfully lists your device, move the ROM file to your android folder and use the following command: adb sideload rom.zip of course replacing 'rom.zip' with whatever your rom's name is. You can also use adb push if you want to move your Nandroid backup to your device, but I am not sure where it will be located on the device itself afterwards.
Oh and you should be in TWRP > Advanced > ADB Sideload mode if you want to sideload the ROM. I am not sure how it works on CWM but it should be the same way.
TarekElsakka said:
Do you have the folder containing the adb and fastboot files on your Desktop? And do you have HTC Sync installed? It will load the proper drivers, even though I heard it may not be necessary anyway.
This method worked for me on my Mac. It is very simple using Terminal.
You don't actually have to download the whole SDK, just download the file attached in the threat, which is this http://forum.xda-developers.com/attachment.php?attachmentid=1396782&d=1350078941
Place it on your Desktop, and follow the instructions. After ADB successfully lists your device, move the ROM file to your android folder and use the following command: adb sideload rom.zip of course replacing 'rom.zip' with whatever your rom's name is. You can also use adb push if you want to move your Nandroid backup to your device, but I am not sure where it will be located on the device itself afterwards.
Oh and you should be in TWRP > Advanced > ADB Sideload mode if you want to sideload the ROM. I am not sure how it works on CWM but it should be the same way.
Click to expand...
Click to collapse
Thanks, i have tried this method already and am in Clockworkmod recovery, i don't have TWRP
I accidentally wiped everything from my HTC One which was previously running Android Revolution HD 31.0. I tried using ADB sideload from TWRP recovery, which is still on my phone, and when typing ADB devices, I do see a random string of numbers with the text ''sideload'' next to it. However, when I try to sideload the rom I get an error: closed or cannot read 'sideload' message. Any ideas? I really need my phone to work..
YoungStarDC said:
I accidentally wiped everything from my HTC One which was previously running Android Revolution HD 31.0. I tried using ADB sideload from TWRP recovery, which is still on my phone, and when typing ADB devices, I do see a random string of numbers with the text ''sideload'' next to it. However, when I try to sideload the rom I get an error: closed or cannot read 'sideload' message. Any ideas? I really need my phone to work..
Click to expand...
Click to collapse
What have you tried..
Assume you have latest drivers and ADB installed fully on PC?
Not sure as I don't use TWRP, but can you mount storage? (if so copy ROM onto sd card via PC)
If you have everything loaded and still no go, is your device s-off?
have you tried "ADB Push" ??
some times this works...when adb sideload fails
"adb push yourrom.zip /data/media/0/"
even this one has to be done from recovery
Harish_Kumar said:
have you tried "ADB Push" ??
some times this works...when adb sideload fails
"adb push yourrom.zip /data/media/0/"
even this one has to be done from recovery
Click to expand...
Click to collapse
flash this recovery and chose side load it will work tested by me. though it takes abt 5min to load 1gb file.
this progress will be showin in your cmd
just place the zip in your adb folder and run
adb push (name of the zip)
http://goo.gl/Q5mfQl
Hello guys,
I hope you can help me.
I wanted to delete all my private files on the sdcard and accidentlty deleted "system" in TWRP...
Now I cannot access my phone anymore
ADB devices is showing me an empty list.
Only on fastboot and when entering sideload through TWRP my HTC One is listed.
Unfortunately when I try "adb sideload rom.zip" I get "* cannot read 'sideload' *"
When I try "adb push rom.zip /sdcard/" in sideload mode, I get "error: closed"
Does anybody have an idea how to get my HTC One working again?
Thank you very much in advance!
Greets kally
kally said:
ADB devices is showing me an empty list.
Only on fastboot and when entering sideload through TWRP my HTC One is listed.
Click to expand...
Click to collapse
Its completely normal, ADB only works in custom recovery or in a booted rom with "usb debug" turned on, ADB doesn't work in bootloader, only fastboot will work in bootloader.
Unfortunately when I try "adb sideload rom.zip" I get "* cannot read 'sideload' *"
Click to expand...
Click to collapse
What is your adb version? You can find the version using the command "adb version"
What is your twrp version?
What rom are you trying to push?
When I try "adb push rom.zip /sdcard/" in sideload mode, I get "error: closed"
Click to expand...
Click to collapse
You can't adb push in sideload mode, sideload mode is only for.... sideloading...
To use adb push, just boot in twrp main menu with sideload turned off.
Does anybody have an idea how to get my HTC One working again?
Click to expand...
Click to collapse
Post the output of "fastboot getvar all" remove imei and serialno.
Hello alray,
thank you for your reply!
My adb version is "Android Debug Bridge version 1.0.31"
TWRP Version: 2.6.3.4
I'm trying to push ARHD 92.0.
Luckily, while typing my answer, I was somehow able to push the rom with adb in the recovery.
Now everything works like a charm.
Thank you very much for your help!
Greets kally
Im trying to install a fresh ROM and keep getting an error.
What am I missing? any insight is greatly appreciated.
ThANKS IN ADVANCE
I don't know if any of these will work but here are some things you can try:
1) Make sure you are on the latest sdk. I think latest is 30.0.4. Looks like you're using v30.0.0?
2) Try using adb -s ### sideload ***.zip. The ### is the the device id you get from adb devices. -s directs the command towards your phone instead of the offline emulator.
3) Try running adb sideload from the path where the zip is located rather than using quotes to include the entire long path. In other words: adb sideload Aosip***.zip. You may have to add the path to platform tools into your environment variables or include the path to adb in the command.
neo_lithic3K said:
I don't know if any of these will work but here are some things you can try:
1) Make sure you are on the latest sdk. I think latest is 30.0.4. Looks like you're using v30.0.0?
2) Try using adb -s ### sideload ***.zip. The ### is the the device id you get from adb devices. -s directs the command towards your phone instead of the offline emulator.
3) Try running adb sideload from the path where the zip is located rather than using quotes to include the entire long path. In other words: adb sideload Aosip***.zip. You may have to add the path to platform tools into your environment variables or include the path to adb in the command.
Click to expand...
Click to collapse
Its kind wierd, it only happens while trying to ADB sideload in the custom Boot.img (lineage, Aosip, etc)
but i have no problem flashing the boot.img vis bootloader.
Thanks for the response.
bignu77 said:
Its kind wierd, it only happens while trying to ADB sideload in the custom Boot.img (lineage, Aosip, etc)
but i have no problem flashing the boot.img vis bootloader.
Thanks for the response.
Click to expand...
Click to collapse
I don't think you're supposed to sideload a boot.img. usually the rom zips will install them as part of the install process
dragynbane222 said:
I don't think you're supposed to sideload a boot.img. usually the rom zips will install them as part of the install process
Click to expand...
Click to collapse
My bad, I worded that wrong it only happens once in the custom recovery and try to ADB sideload the rom, i get that error.
Fastboot boot.img via bootloader works fine.
My trouble starts one in custom recovery and it shows "emulator-5554". Please see attachment.
Thanks
bignu77 said:
Im trying to install a fresh ROM and keep getting an error.
What am I missing? any insight is greatly appreciated.
ThANKS IN ADVANCE
Click to expand...
Click to collapse
The computer is telling you what the error is. In fact adb tried to flash the ROM twice two different ways and still displayed the same error. "More than one device/emulator". The connection fails because you have another device/emulator/something connected to your computer that adb recognizes. Adb states that too. Adb will not flash to more than one device so you have to find what that thing is. Try removing things you have connected to your computer or the emulator, whatever it is, because we don't know. Or try what the other guy said, specifically method #2. You never replied wether or not you tried that specifically. That could work. One other thing, are you in the custom recovery selecting "apply update from adb/whatever it is" and trying to sideload it? Otherwise make sure to update the sdk too because we don't know if you actually tried that either.
Sent from my Pixel 4 XL using XDA Labs
bradical711 said:
The computer is telling you what the error is. In fact adb tried to flash the ROM twice two different ways and still displayed the same error. "More than one device/emulator". The connection fails because you have another device/emulator/something connected to your computer that adb recognizes. Adb states that too. Adb will not flash to more than one device so you have to find what that thing is. Try removing things you have connected to your computer or the emulator, whatever it is, because we don't know. Or try what the other guy said, specifically method #2. You never replied wether or not you tried that specifically. That could work. One other thing, are you in the custom recovery selecting "apply update from adb/whatever it is" and trying to sideload it? Otherwise make sure to update the sdk too because we don't know if you actually tried that either.
Sent from my Pixel 4 XL using XDA Labs
Click to expand...
Click to collapse
Thanks for clearing that up.
The only other thing connected it the cordless mouse reciever.
I also did update sdk platform. as shown in the attached. Yes i am trying to apply update from adb and then sideload command I also tried typing the specific file name instead of the whole path.
It only happens in adb mode. Flashing via fastboot works fine with no emulator error.
Ive been flashing for months using the standard adb method with no hiccups. Now im getting this error
SOLVED
I found it!! It was a game my kids downloaded that had a built emulator that causing the hiccup! Back to gold, thanks guys!!:good::highfive:
bignu77 said:
I found it!! It was a game my kids downloaded that had a built emulator that causing the hiccup! Back to gold, thanks guys!!:good::highfive:
Click to expand...
Click to collapse
Figured it something related to that, I'm happy you fixed it though, enjoy the ROM.:good: