Related
Hello :
When im sending a mail or sms i write the frist letters of the contact and start to apear the name.
If i got more than on with the same mame i got ... (3 points) , what i have to do to see the others ?
If i got a william apple, and a wiliam beta it only shows the william apple and ....
Thnks , may be this got a easy anser but....i cant find.
I have the same problem as yours. Is this a bug in Diamond because I haven't had this before with my Tytn II?
type "william" then press and hold the space key to get a " " (space); then type "b" to get wiliam beta.
press space key without holding it will select willam apple in your example.
I will Try ...but it should apear a list to select....
thnks
galinha said:
I will Try ...but it should apear a list to select....
thnks
Click to expand...
Click to collapse
i too feel it should, but, either the feature is not there or I've not found the correct procedure to get the list.
xwaiz said:
type "william" then press and hold the space key to get a " " (space); then type "b" to get wiliam beta.
press space key without holding it will select willam apple in your example.
Click to expand...
Click to collapse
space dont work....its like enter just select the first wiliam...
galinha said:
space dont work....its like enter just select the first wiliam...
Click to expand...
Click to collapse
yes... same here
While inputting the name, just press left or right to scroll the name list.
galinha said:
Hello :
When im sending a mail or sms i write the frist letters of the contact and start to apear the name.
If i got more than on with the same mame i got ... (3 points) , what i have to do to see the others ?
If i got a william apple, and a wiliam beta it only shows the william apple and ....
Thnks , may be this got a easy anser but....i cant find.
Click to expand...
Click to collapse
yes...press Menu->Check Names. OK?
Guys, what you are all refering too is the famous t9 bug. (already in TytnII diamond ROM releases)
Look for "disable t9" cab , run it and use original (not Diamond) keyboard and you'll see ALL names when one or two or more letters are typed.
You will also have word completion / suggestion running than.
it is a workaround as there seems to be no full solution yet to have all names visible with t9 enabled in Diamond KB mode
cayotte said:
While inputting the name, just press left or right to scroll the name list.
Click to expand...
Click to collapse
Sorry how i scroll ?
galinha said:
Sorry how i scroll ?
Click to expand...
Click to collapse
Press the left or right or down button to see another contact.
I have been searching about this issue and only managed to find this thread. Has this by any chance been solved? It is annoying me to no end. The Left or right button press dows not do it for me!
If I have "Adam Alpha" and "Adam Beta" in my contacts list there seems to be NO WAY to choose Adam Beta except through the add recepients function in the menu. On my old touch, I used to be able to add receipients by simply typing the first few letters of a contact and the list of contact options would show up! This sux so bad now! If I type in the name, there is simply NO way at all to get "Adam Beta"...you can only get Alpha!
Grrrrrr.... Using that cab and the WM keyboard is not a solution for me....I need a thumb capable solution....
eskasi said:
I have been searching about this issue and only managed to find this thread. Has this by any chance been solved? It is annoying me to no end. The Left or right button press dows not do it for me!
If I have "Adam Alpha" and "Adam Beta" in my contacts list there seems to be NO WAY to choose Adam Beta except through the add recepients function in the menu. On my old touch, I used to be able to add receipients by simply typing the first few letters of a contact and the list of contact options would show up! This sux so bad now! If I type in the name, there is simply NO way at all to get "Adam Beta"...you can only get Alpha!
Grrrrrr.... Using that cab and the WM keyboard is not a solution for me....I need a thumb capable solution....
Click to expand...
Click to collapse
Have you tried the check names option in Menu?
saveferris said:
Have you tried the check names option in Menu?
Click to expand...
Click to collapse
Thanks save ferris....I didn't realize that option was available....helps. However, it is still two keypresses longer than before. You have to press menu, and then check names....before, if you just typed in Ada, the names/options would show up to choose from immediately....
It seems to be a step backwards in design to me. I was just wondering if there was some kind of potential registry fix to show more options...
Ok, so when I used to start typeing a contacts name in the 'to' field of message, it would give me a list of names or numbers after putting in a few letters or numbers. Now I have to put in a couple letters/numbers and then go to check name. Anyone have any idea how i turned this off.
GreenLantern said:
Ok, so when I used to start typeing a contacts name in the 'to' field of message, it would give me a list of names or numbers after putting in a few letters or numbers. Now I have to put in a couple letters/numbers and then go to check name. Anyone have any idea how i turned this off.
Click to expand...
Click to collapse
try this:
u want to send sms to Johny, start typing to the name field "Jo" and then push the space bar on your keyboard, an option of the possible names should pop up at the bottom.
Mikulec said:
try this:
u want to send sms to Johny, start typing to the name field "Jo" and then push the space bar on your keyboard, an option of the possible names should pop up at the bottom.
Click to expand...
Click to collapse
ok, now I feel a bit retarded, don't remember doing that before, but guess it was. Thanks.
Have loaded any new touch keyboards to your device. For me, that feature will stop working after I add any new keyboards. It will come back for a bit after a soft reset, but then it goes away again. Once I remove the offending keyboard, then it works again... I wish I could have both.
I have a similar problem if I use large title bar. When its loaded, the roller wheel on the side no longer controls call volume... Again, wish I had both!
GreenLantern said:
ok, now I feel a bit retarded, don't remember doing that before, but guess it was. Thanks.
Click to expand...
Click to collapse
u r welcome, I feel retarded most of the time.
GreenLantern said:
ok, now I feel a bit retarded, don't remember doing that before, but guess it was. Thanks.
Click to expand...
Click to collapse
You should't have to enter a space to get the options. It should appear as your typing.
As mentioned above if you installed a keyboard from another device, such as the Touch or Diamond, with T9/XT9 you will lose this auto complete and word suddgestion. There is a disable XT9 cab witch will give you the auto complete and word suddgestion back, but cause the non defult keyboards to enter number only, no letters. it that is the case you have to decide witch is more important to you.
Did you install another keyboard? or did it just stop working as it had?
I will agree that the Installation of Customer SIPs like PCMKeyboard or something else will interfere with this..
RojasTKD said:
You should't have to enter a space to get the options. It should appear as your typing.
Click to expand...
Click to collapse
yes, but its the workoround if u have installed other sips. I dont hyave this isue and have resco keybord installed, so that one is not causing the issue.
Mikulec said:
yes, but its the workoround if u have installed other sips. I dont hyave this isue and have resco keybord installed, so that one is not causing the issue.
Click to expand...
Click to collapse
Correct, but I was just replying to him saying:
ok, now I feel a bit retarded, don't remember doing that before, but guess it was. Thanks"
because he shouldn't feel stupid, because he did't have to do it previously.
Does anyone else have the following problem ?:
When you go to the SMS tab, and press the small box to start writing new SMS, if you use the original Diamond keyboard, you can just type a few letters of your contact and it will fully appear. If you use TouchPal (I'm using version 3.5), this feature is disabled, you have to type your entire contact name every time, it doesn't recognize the first few letters and try to find a match. This is SO annoying !
Please tell me there is some workaround...
Could it be that the Diamond's original keyboard stores all the contact information in the Keyboard dictionary ?, if this is true, it means no keyboard apart from Diamond's original will allow quick find of contacts in SMS...
no problem with me..
say for eg you wanna call "home"
just press H O and enter and then it will detect home in my contact.
i suspect the problem may be.. touchpal "store" what you pressed in its own list instead of going up to the SMS directly..
Same problem. Would love to see an solution, but I think there is none...
Wizard,
Do you have the Touchpal keyboard ???
its free for personal use available online..
The contacts don't display when you start typing, but if you only type a few letters and then press send a page appears with all contacts that have the letters you've typed in their names. You can then tap the contact you wish to send to.
I don't find it a problem.
mouseymousey said:
The contacts don't display when you start typing, but if you only type a few letters and then press send a page appears with all contacts that have the letters you've typed in their names. You can then tap the contact you wish to send to.
I don't find it a problem.
Click to expand...
Click to collapse
Thanks.
How the hell did you figure that out ?, I would have never tried it myself...
Noam23 said:
Does anyone else have the following problem ?:
When you go to the SMS tab, and press the small box to start writing new SMS, if you use the original Diamond keyboard, you can just type a few letters of your contact and it will fully appear. If you use TouchPal (I'm using version 3.5), this feature is disabled, you have to type your entire contact name every time, it doesn't recognize the first few letters and try to find a match. This is SO annoying !
Please tell me there is some workaround...
Click to expand...
Click to collapse
slide up the 'enter' key on single-key layout for disable word prediction. then u can get back the single letter search and few letters matching feature just like original Diamond keyboard
desol said:
slide up the 'enter' key on single-key layout for disable word prediction. then u can get back the single letter search and few letters matching feature just like original Diamond keyboard
Click to expand...
Click to collapse
That's the first thing I tried, I was shocked that it didn't work !, does this work for you ???
Noam23 said:
That's the first thing I tried, I was shocked that it didn't work !, does this work for you ???
Click to expand...
Click to collapse
yes, its work for me
desol said:
yes, its work for me
Click to expand...
Click to collapse
How could this be ???, could you please tell me your Touchpal settings ?
Noam23 said:
How could this be ???, could you please tell me your Touchpal settings ?
Click to expand...
Click to collapse
i didnt set anything. its all be default n not using any language pack
desol said:
i didnt set anything. its all be default n not using any language pack
Click to expand...
Click to collapse
desol, does it work for you if you don't disable word prediction ?, Wizard claimed in this thread that even in word prediction it works...
Here is the quote of Wizard:
no problem with me..
say for eg you wanna call "home"
just press H O and enter and then it will detect home in my contact
Click to expand...
Click to collapse
beside the contact list problem, I found that the copy and paste button is not working too. Do you have this problem?
Noam23 said:
desol, does it work for you if you don't disable word prediction ?, Wizard claimed in this thread that even in word prediction it works...
Here is the quote of Wizard:
Click to expand...
Click to collapse
if I dont disable word prediction. I will use the way same with Wizard. Both way are work fine for me
Noam23 said:
Thanks.
How the hell did you figure that out ?, I would have never tried it myself...
Click to expand...
Click to collapse
Can't remember how I found it, almost certainly by mistake though
mouseymousey said:
Can't remember how I found it, almost certainly by mistake though
Click to expand...
Click to collapse
totally agree.. we're learn by mistake
just in case you guys are still experiencing this problem, i found a fix at http://forum.ppcgeeks.com/showthread.php?p=241036
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409\Ime File
set the Ime File value from \windows\eT9ime.dll to compime.dll
soft reset device.
yea i think touchpal has alot of problems. liek the new v3.5 when i ever type in the word "its" or "were" in my sprint diamond, phone restarts wtf and same thing in the htc mogul.
Anyone have this issue to or a fix to it?
Hi!
I got a problem on my diamond that i just can't seem to fix :/.
I cant change from Full-qwerty keyboard :/.
I got this problem today but i havent done anything to get it.
I've tried changing from full-qwerty in the menu on the top-left corner, but it just keeps changing back.
I can't change it while writing sms, can't click on the small arrow down in the middle beside the keyboardbutton.
Nothing works :/
Can anyone please help me? I'm going crazy writing on the qwerty keyboard, takes so much more time!
Thanks!
try this go to start/settings/system/screen/align screen follow instructions then you should be able to access the arrow tab at the side of your keyboard icon and change to whichever format you require hope this helps
Thank you but i didn't help :/
I cant click on that arrow.
And when going to start/settings/input(?)(i have the swedish version so i dont know the english word for it) I change it to normal keyboard or just something else besides qwerty.
But when i return into the menu it says "qwerty" :/ it just keeps changing back :/
sorry dont speak swedish use a translator in google
Hi!
I can change my keyboard here:
start/settings/system/
Sunnysoft InterWrite <- this is the program's name.
sry about my bad eng.
Okey, well google translated it to input so it must have another word in the mobile :/
Well if you go to start/settings and then click on the icon in the middle on the top if you know what i mean? There you can change from qwerty to normal keyboard and so on... can you find it?
Well that just keeps changing back to fullqwerty the whole time :/
morzseya said:
Hi!
I can change my keyboard here:
start/settings/system/
Sunnysoft InterWrite <- this is the program's name.
sry about my bad eng.
Click to expand...
Click to collapse
Okey.. well i dont have that program there :/ have you installed it or?
if you cannott change it via the arrow tab at the side of your keyboard icon think your screen might be damaged once i change mine by either of the methods stated in this thread it stays as i have asked
davey33 said:
if you cannott change it via the arrow tab at the side of your keyboard icon think your screen might be damaged once i change mine by either of the methods stated in this thread it stays as i have asked
Click to expand...
Click to collapse
Okey, but the strange thing is that i can change it in the menu! But it just keeps changing back. That cant have anything to do with my screen being damaged or not..
Edit: Its like its locked to Full qwerty somehow :/
jonatk said:
Okey, but the strange thing is that i can change it in the menu! But it just keeps changing back. That cant have anything to do with my screen being damaged or not..
Click to expand...
Click to collapse
ask your question to this guy if he doesnt know nobody will
http://forum.xda-developers.com/showthread.php?t=412850
davey33 said:
ask your question to this guy if he doesnt know nobody will
http://forum.xda-developers.com/showthread.php?t=412850
Click to expand...
Click to collapse
Thank you!
jonatk said:
Thank you!
Click to expand...
Click to collapse
no problem thats what were all on here for
jonatk said:
Okey.. well i dont have that program there :/ have you installed it or?
Click to expand...
Click to collapse
That program was installed my diamond (original vodafone htc diamond).
Use Vijay555's "sipSwitch", google it, on this forum somewhere...
bbobeckyj said:
Use Vijay555's "sipSwitch", google it, on this forum somewhere...
Click to expand...
Click to collapse
Thank you, but i cant seem to find it anywhere.
Not on this forum, not on google. :/
Could you maybe help me?
Edit: I found it, but when trying to install it the qwerty keyboard just keeps popping up :/
jonatk said:
Thank you, but i cant seem to find it anywhere.
Not on this forum, not on google. :/
Could you maybe help me?
Edit: I found it, but when trying to install it the qwerty keyboard just keeps popping up :/
Click to expand...
Click to collapse
How are you creating the shortcuts?
Try SIPChange.
http://forum.xda-developers.com/showthread.php?t=271008
Worked for me when my Diamond kept changing back to the default keyboard in the new ROM I installed yesterday.
bbobeckyj said:
How are you creating the shortcuts?
Click to expand...
Click to collapse
Creating shortcuts? Dont think i understand how to use that program :/
Davey101 said:
Try SIPChange.
http://forum.xda-developers.com/showthread.php?t=271008
Worked for me when my Diamond kept changing back to the default keyboard in the new ROM I installed yesterday.
Click to expand...
Click to collapse
Thank you!!!!!
Now it finally works
You've saved my day
jonatk said:
Creating shortcuts? Dont think i understand how to use that program :/
Click to expand...
Click to collapse
If you want to know how to make shortcuts and use command lines, have a look on vijay555's site, he explains it very well. His app (and many others) will not work untill you learn how to do this.
Hey guys,
I bought my LG Optimus Black today and installed Zeus ROM
There's no Arabic keybaord and when I install some from the market they don't appear in Settings.
Any help?
Thnx in advance
You ll have to enable them, some need to be enabled in: settings --> Language and keyboard (checkbox), then go to SMS app or any other text app, go to new message, click the text area, hold your finger there, a new window opens, click input method, choose the new keyboard you installed and be happy ever after
The problem is that they don't appear in Language and Keyboard
And here?
then go to SMS app or any other text app, go to new message, click the text area, hold your finger there, a new window opens, click input method, choose the new keyboard you installed and be happy ever after
Click to expand...
Click to collapse
Nothing neither? So under input method?
N00BY0815 said:
And here?
Nothing neither? So under input method?
Click to expand...
Click to collapse
Nope.........
Just tell me which keyboard you want to use, then I'll try it at my phone and give you a short how to I mean which one specifically.
N00BY0815 said:
Just tell me which keyboard you want to use, then I'll try it at my phone and give you a short how to I mean which one specifically.
Click to expand...
Click to collapse
It seems like there was a problem in the keyboard, installed another one and it works now !
Thanks for your help