I've searched everywhere but I can't find a good case that clips to a belt that looks sturdy and/or protects the phone very well. Suggestions please! Pics would help too. Thank you!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
The new otterbox. Someone reviewed it in this section.
I really like my new blue Seidio Surface Case with Holster.
Sent from my SGH-T889 using xda premium
I've got this one from Amazon and it fits with the cases i bought for my note 2
Sent from my SAMSUNG-SGH-I317 using xda premium
Do u think it will fit the note 2 with candyshell case on? Or the cruzerlite? Thanks
Sent from my SCH-I605 using xda app-developers app
I have two cases it works with every one and my cases have some size to it
Sent from my SAMSUNG-SGH-I317 using xda premium
dnkeyhnter said:
I've searched everywhere but I can't find a good case that clips to a belt that looks sturdy and/or protects the phone very well. Suggestions please! Pics would help too. Thank you!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I ordered this one yesterday. I'll post pics once I receive it. It says December 17 as estimated delivery date...I hope that's a mistake, cuz it doesn't take 2 weeks to ship to anywhere in the US haha
http://item.mobileweb.ebay.com/viewitem?itemId=190758249567
Sent from my Sexy Galaxy Note II
found a nice place to mount your 2?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I drive a 2002 Grand Prix and I use to mount my Note 2 on the left side right above the dash air vent using one of those universal holders that would stick to your windshield. It did'n't obstruct my front view at all. But I didn't really use it that much because it was just to big, clunky, and really ugly. So I just gave it to my girlfriend. I'm currently looking for something more compact, that will clip on to the center vents of the dashboard, and is easily removable to stow away when not in use.
I was looking into something like this. But I'm kind of leaning towards something that will just clip on the vent.
http://www.ebay.com/itm/120975906437?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
What about a CD mount?
Sent from my GT-N7100
laztpn0i said:
I drive a 2002 Grand Prix and I use to mount my Note 2 on the left side right above the dash air vent using one of those universal holders that would stick to your windshield. It did'n't obstruct my front view at all. But I didn't really use it that much because it was just to big, clunky, and really ugly. So I just gave it to my girlfriend. I'm currently looking for something more compact, that will clip on to the center vents of the dashboard, and is easily removable to stow away when not in use.
I was looking into something like this. But I'm kind of leaning towards something that will just clip on the vent.
http://www.ebay.com/itm/120975906437?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Click to expand...
Click to collapse
Here's what i was thinking as the cupholders are too shallow and I need to be fingers reach away from my phone.
http://m.tigerdirect.com/applicatio...mc=Email-_-WebletMain-_-WEBLET03ORDER-_-Deals
I have one on order as of today.
@rbiter said:
What about a CD mount?
Sent from my GT-N7100
Click to expand...
Click to collapse
CD mount is not an option as the radio I will be using has no CD slot accessible.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I also bought this one too today to see if I csn get it to suction to inside the cupholder.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
The other option would be to suction cup on top of the dash right above the DIC, hanging downwards but that's too far s reach for me.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I have a 99 GTP I haven't gotten a mount yet but might look for one. My old NS4G fit in the cup holder but no way this behemoth is doing that lol. I tried propping it on the shifter and it just fell. Basically keep it in my pocket or in the cubby hole in front of the shifter.
Incorrectly spelled on my stock rooted Sprint Note II
sky1193 said:
I have a 99 GTP I haven't gotten a mount yet but might look for one. My old NS4G fit in the cup holder but no way this behemoth is doing that lol. I tried propping it on the shifter and it just fell. Basically keep it in my pocket or in the cubby hole in front of the shifter.
Incorrectly spelled on my stock rooted Sprint Note II
Click to expand...
Click to collapse
See I use my Note way too much to keep it stowed away. Plus, it needs to be close so s not to distract my driving....
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I used to own a 01 grand Prix GTP and think this would work i bought one for my bmw recently it hasnt arrived yet but once it does i can give you some feedback on it cost me less then $10 on eBay.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
nyrican779 said:
I used to own a 01 grand Prix GTP and think this would work i bought one for my bmw recently it hasnt arrived yet but once it does i can give you some feedback on it cost me less then $10 on eBay.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I'm sure it would. But even reaching for the radio is a bit of work. Yes, im that lazy....
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dakleenupman said:
I also bought this one too today to see if I csn get it to suction to inside the cupholder.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Let me know how that turns out I like the cup holder idea.
Incorrectly spelled on my stock rooted Sprint Note II
sky1193 said:
Let me know how that turns out I like the cup holder idea.
Incorrectly spelled on my stock rooted Sprint Note II
Click to expand...
Click to collapse
Oh but of course I will.... This is XDA baby!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
You could also get any $3 case off ebay, put soft Velcro on the back of the case and then a square of hard velcro anywhere on the dash. I've been doing this for a while and I love it.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
eglesiaw said:
You could also get any $3 case off ebay, put soft Velcro on the back of the case and then a square of hard velcro anywhere on the dash. I've been doing this for a while and I love it.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
That would work except I leave my N2 in te OtterBox Defender case.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
http://www.proclipusa.com/?sectionp...lder=false&have_mount=false&p_pageid=1&dtype=
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dakleenupman said:
I also bought this one too today to see if I csn get it to suction to inside the cupholder.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Most vehicle plastics are textured. If the bottom of your cupholder is textured this won't work. It needs a flat /smooth surface.
Sent from my SPH-L900 using xda premium
KB112 said:
Most vehicle plastics are textured. If the bottom of your cupholder is textured this won't work. It needs a flat /smooth surface.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
It's flat but not the entire size of the flat surface is available due to the folding design. The one mount does come with a suction platform though.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dakleenupman said:
Oh but of course I will.... This is XDA baby!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Ok so one of the 2 mounts I ordered came in today. It's very late and after 13 hours of work, I am too tired to do any pics. But I shoud be getting some hopefully tomorrow.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Ok so no need for pics on the first one. It will not fit the factory cupholders. Nor will it attach/fit anywhere else except the windshield. So for now, until the floor mount cradle gets here, left side corner of windshield is where my Note will go. Definitely not ideal but it'll do.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Hi, I bought an aluminium bumper case for my note but found that it inteferes with my spen. When I am using it towards the edges of the screen I have to press harder for the spen to work. Especially in the corners. Would like to known if anyone else has this. ..
Sent from my GT-N7100 using xda premium
Which case did you get?
Sent from my GT-N7105 using xda app-developers app
podface said:
Hi, I bought an aluminium bumper case for my note but found that it inteferes with my spen. When I am using it towards the edges of the screen I have to press harder for the spen to work. Especially in the corners. Would like to known if anyone else has this. ..
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
did you try it with out the aluminium bumper? maybe its not the bumper after all as i might have the same situation as you do.
podface said:
Hi, I bought an aluminium bumper case for my note but found that it inteferes with my spen. When I am using it towards the edges of the screen I have to press harder for the spen to work. Especially in the corners. Would like to known if anyone else has this. ..
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I have an aluminun bumper and don't have this issue. I ordered mine from eBay.
Sent from my NOTEworthy smartphone
podface said:
Hi, I bought an aluminium bumper case for my note but found that it inteferes with my spen. When I am using it towards the edges of the screen I have to press harder for the spen to work. Especially in the corners. Would like to known if anyone else has this. ..
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I had the same issues with my bumper I removed it and those problems are gone
Sent from my SAMSUNG-SGH-I317 using xda premium
Yeah it works fine without the bumper
Sent from my GT-N7100 using xda premium
Do you still see the little nib on the screen on the corner where the problem is?
Sent from my SPH-L900 using xda premium
Yh the nib doesn't show up in the corners and when writing I have to press twice as hard in the corner for it to register. Everything works fine with the bumper off.
Sent from my GT-N7100 using xda premium
Has anybody bought a gelaskin skin for the note II if so how is the quality and is front piece a screen protecor too? http://www.gelaskins.com/
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I used Gelaskins on my Galaxy Nexus and I was very happy with it. It came with the front piece but I didnt use it. It just borders the screen. So it's not a true screen protector.
The Gnex has a textured back and it stuck to it perfectly for several months. So I am sure you would not have any issues on the Note 2
Sent from my SCH-I605 using Tapatalk 2
Thanks for the reply
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Has anyone tried the commuter case with the seidio active holster to see if it works well together?
Reason im asking is because they tried it but for s3 and it worked well.
Sent from my SPH-L900 using xda app-developers app
It should, I'm using it with a dual pro shine Incipio case and there's still a tiny little wiggle room left.
Sent from my Nexus 7 using Tapatalk 2
e-motion said:
It should, I'm using it with a dual pro shine Incipio case and there's still a tiny little wiggle room left.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Ok great im going to give it a try and post my review
Sent from my SPH-L900 using xda app-developers app