Hello every one,
I am using the latest nightly bild from CM10.1 and I am trying to install GPSCountryOptimizer app with adb but all the time it give me error INSTALL_FAILED_INVALID_APK ?
Can anyone please explain me what do I need to do? Also tried to wipe devlik after copying the same app in system folder and setting permissions as well but no use.
Thanks.
sPEADy said:
Hello every one,
I am using the latest nightly bild from CM10.1 and I am trying to install GPSCountryOptimizer app with adb but all the time it give me error INSTALL_FAILED_INVALID_APK ?
Can anyone please explain me what do I need to do? Also tried to wipe devlik after copying the same app in system folder and setting permissions as well but no use.
Thanks.
Click to expand...
Click to collapse
check settings in Developer Options about adb. may be you do not have some check point there...
also uncheck <verify application> and check <unknown sources> and try again
gtdaniel said:
check settings in Developer Options about adb. may be you do not have some check point there...
also uncheck <verify application> and check <unknown sources> and try again
Click to expand...
Click to collapse
Thanks for your quick reply. I have checked USB Debugging, Debugging over network is unchecked, Apps over USB checking is unchecked.
It should be right or maybe I am wrong.
With the Following Process it worked out how to install the unsigned apps.
Here are a couple of different options to try.
For both options you will need to put the gallery apk into the same directory as your sdk install. (if you don't know what this is try to pull a file from your device and see where it ends up. Mine is /AndroidSDK/tools because I installed the SDK in the /AndroidSDK directory on my PC)
with all of the commands to type below ignore the single quotes (')
*Install from PC*
1) connect your phone and make sure adb can detect it.
- Launch command prompt
- Navigate to your sdk directory
- type 'adb devices' - you should now see your device listed.
2) Go back to the command prompt and type 'adb install [apk name.apk]
3) You should now see a success message, if you it fails try my other option below.
*Manually place APK into /system/app*
1) connect your phone and make sure adb can detect it.
- Launch command prompt
- Navigate to your sdk directory
- type 'adb devices' - you should now see your device listed.
2) push gallery apk to your sd card.
-type 'adb push [apk name.apk] /sdcard/[apk name.apk]
3) Launch a second command prompt
-type 'adb shell'
-type 'su'
-type 'mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system'
4) go back to first command prompt
-type 'adb shell'
-type 'su'
-type 'cd /system/app'
-type 'cp /sdcard/[apk name.apk] [apk name.apk]'
-command prompt will show 'cp /sdcard/[apk name.apk] [apk name.apk]'
-type 'exit' (this will get you out of su)
-type 'exit' again (this should get you out of adb shell)
-type 'exit' again (this should close the command prompt)
5) go back to first command prompt
-type 'exit' (this will get you out of su)
-type 'exit' again (this should get you out of adb shell)
-type 'adb reboot' (this will reboot your phone)
-type 'exit' again (this should close the command prompt)
You may not need to do this in 2 command prompts, but for some reason I've had issue using just one before.
one of these should work.
Thanks to ezun for so detailed post.
Having the same problem here with the PwnMyMoto rooting file. Thing is, the Droid maxx does not have a sd card. Should I just type "System" instead of sdcard in the command?
Related
I found this website: http://www.androidkit.com/steps-to-install-and-uninstall-apk-file-on-android-g1-device
Section 3: Uninstalling the .apk file from the G1 device before installing the same .apk again.
1. In the G1 Phone, Go to Applications Menu ->Settings->Manage Applications.
2. Select the application which you want to Uninistall, and click on the ‘Uninstall’ button.
3. Follow steps 6 and 7 of Section 1.
Section 4: Uninstalling the .apk file (from the Device or Emulator) using adb shell.
There is an adb uninstall command which always shows Failure!!!
Using adb shell :
Important: The device has to be unplugged from USB if you are trying to uninstall from the emulator, else emulator should not be open and device needs to be plugged in the USB of the PC if you are trying to uninstall from the G1 Device. If either of them are not connected the adb shell command will not work
Go to the shell and making sure adb is in PATH:
Go to shell (from cmd->adb shell or directly through a terminal)
#
#cd data
#cd app
#cd ls
You will get a list of installed application with the complete package name of the package containing the main activity. e.g com.company.product.apk
#rm com.company.product.apk
#cd ls
You will not find the application – you just removed it!.
Click to expand...
Click to collapse
So, when I type:
Cd Data
Cd App
Cd ls
in my command prompt I get:
cd: can't cd to ls
$
as a prompt feedback.
----
I found an .APK to enable my headphone adapter working ( see this thread: http://forum.xda-developers.com/showthread.php?t=575534 ) via this board ( see this thread: http://forum.xda-developers.com/showthread.php?t=511704 ), and if it doesn't work, I'm taking precautions on how to uninstall it.
Anyone know why it's doing this?
Thanks people.
Minifig said:
I found this website: http://www.androidkit.com/steps-to-install-and-uninstall-apk-file-on-android-g1-device
So, when I type:
Cd Data
Cd App
Cd ls
in my command prompt I get:
cd: can't cd to ls
$
as a prompt feedback.
----
I found an .APK to enable my headphone adapter working ( see this thread: http://forum.xda-developers.com/showthread.php?t=575534 ) via this board ( see this thread: http://forum.xda-developers.com/showthread.php?t=511704 ), and if it doesn't work, I'm taking precautions on how to uninstall it.
Anyone know why it's doing this?
Thanks people.
Click to expand...
Click to collapse
the command should be "ls" not "cd ls"
also, if you know the package name you could use adb: adb uninstall <package_name>
and if you're just trying to install an app that you already have (such as updating the app) you could use adb and not have to uninstall first with: adb install -r app_name.apk
OK.
I'm just going to make sure before I even install this thing:
http://code.google.com/p/toggleheadset/downloads/detail?name=ToggleHeadset.apk&can=2&q=
This is just a widget, so it won't replace anything in my phone..
If I can't find it on the shell command, I'll be able to uninstall it via the phone like the Date widget I have as well?
Right?
Hello All!
After much frustration with setting up ADB i finally got it working. Everyone said its simple and takes minimal knowledge but when things dont work, nothing really worked. Anyways after 2 hours of research trying to get ADB to work i finally got it all working and wanted to share my knowledge to anyone else that needed help.
This Guide is for windows only. If you are using Mac OS X please go here: ADB For Dummies
If you are using Linux please go here: [HOW-TO]Set up Android SDK/ADB/Fastboot on Ubuntu Linux
Like My Guide(s)? Donate
--------------------------------------------------------------------------
Things you need:
Android SDK - Download
Winrar - Download (32bit) Download (64bit)
Windows PC
USB Cable
A Rooted HTC Dream (Google G1)
--------------------------------------------------------------------------
Setting up the Android SDK
Download the file from above
Unzip to your desktop
Take the "android-sdk-windows" folder and move it to the root of your hard drive (C:\)
Right click on My Computer and click properties
Select the Advanced Tab or Advanced System Setting (Vista/Windows 7)
Select Environment Variables...
Press New
For Variable Name type: adb
For Variable Value type: C:\android-sdk-windows\tools
Now, [Get new sdk (1.5r3) to work]
1. Run SDK Setup.exe
2. If it gives you an error go to settings and click on "Force http//....."
3. Select all options and let it download and install
If you cant get the setup to work, Download the USB-DRIVERS folder - HERE (Windows XP/Vista/Windows 7)
--------------------------------------------------------------------------
Preparing your phone for ADB
Go to Settings on your phone
Select Applications
Select Development
Make sure 'USB Debugging' is checked
--------------------------------------------------------------------------
Installing Drivers
Plug in your phone through USB and DO NOT MOUNT IT!!!!!
Your computer should see a new device and try to install Android 1.0 driver (If it doesnt, scroll down to the "Im not getting a notification of Android ADB when i plug in my USB" section)
Let it load
Once it cant find them select "Install drivers from my pc"
The drivers you need are in the Android SDK 1.5r2 folder (C:\android-sdk-windows\usb_driver)
Depending on your OS pick x86 or amd64
You ADB Android Device should now be installed! Good Job
For Android SDK 1.5r3+
1. Run SDK Setup.exe
2. If it gives you an error go to settings and click on "Force http//....."
3. Select all options and let it download and install
If you cant get the setup to work, Download the USB-DRIVERS folder - HERE (Windows XP/Vista/Windows 7)
--------------------------------------------------------------------------
Check if your phone is detected by ADB
Open up Command Prompt (Go to run, type in cmd, press enter)
Type in
Code:
cd C:\android-sdk-windows\tools === Press Enter
adb devices === You should see your device listed
adb shell === you should see # in the next line
Now you are all set to run adb commands
Note: for a list of commands type in 'adb' in cmd
CONGRATS YOU NOW HAVE ADB FULLY RUNNING!
--------------------------------------------------------------------------
Droid Explorer by Camalot
Droid Explorer is a Windows software that will download, install, and setup the android SDK for you all in under a minute so you are ready to go. I use this on a daily basis. This amazing piece of software has tons of plugins and a built in file explorer for all your files on your phone! All you gotta do is download, install, and go!
Download Droid Explorer - Here
Install the program, and let it setup the SDK files for you
Connect your phone
Enjoy!
--------------------------------------------------------------------------
"Im not getting a notification of Android ADB when i plug in my USB"
Why: Your computer has detected your phone but as a protable device and as a storage device.
Fix: This took me a lot of research and time to figure out so this is what your are going to do.
First download USBDeview - Here
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Follow the steps above to install the drivers
--------------------------------------------------------------------------
When Typing just adb in cmd you will get whats called a "usage doc" which gives you a lits of commands that you can use:
Code:
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] <file> - push this package file to the device and instal
l it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb root - restarts adb with root permissions
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PDP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
--------------------------------------------------------------------------
Commands that you should know
adb push - Insert file to phone such as Stock.apk to /data/app_s
Code:
adb push <pathtofile.apk> <file system location> - Example: adb push c:\app.apk /data/app
adb pull - Remove file from phone such as Stock.apk from /data/app_s
Code:
adb pull <pathtofile.apk> - Example: adb pull /data/app_s/Stock.apk
adb install - Install app to phone
Code:
adb install <path to file> - Example: adb install c:/apps/apps2sd.apk
adb uninstall - Uninstall app from phone
Code:
adb uninstall <name of application> - Example: adb uninstall linda.apk
For more ADB Commands go - Here
--------------------------------------------------------------------------
Thats it for ADB! Congrats and if you have any questions please ask me or if anything is missing or not correct please tell me. I got all of this from research and personal experience.
-------bump------
Good guide, pretty simple... Ill bookmark this, so I can send people that needs help here.
i have attached a zip that has the files i use to get basic use like for doing root to stock to upgrading 2.1-2.2 and other small things.
extract to C:\fastboot
in C:\fastboot you will find a "cmd" batch file. just run it and it should be ready for you to type in adb commands or fastboot. just make sure your in debug mode by doing all in the first post for installing drivers and all that.
U seriously bumped this thread? Lmfao
help?
i was trying adb and i got!
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
K:\>adb devices
List of devices attached
HT07YHL02294 offline
HT07YHL02294 device
K:\>adb remount
error: more than one device and emulator
Click to expand...
Click to collapse
ADB
i have this message Permission Denied what should i do?
thank you D200P13 soo much. i got it working thanks to your files
X10 adb issues
Can't get it to work for my X10.
ADB does not see my X10 when connected, have tried all mentioned above several times, no luck.
USB drivers seem not to install.
Do i need something special for my X10 to connect via ADB ?
p2dewit said:
Can't get it to work for my X10.
ADB does not see my X10 when connected, have tried all mentioned above several times, no luck.
USB drivers seem not to install.
Do i need something special for my X10 to connect via ADB ?
Click to expand...
Click to collapse
Turn telephone i debug mode.
when i type adb it says that it's an unrecognized command.
That's because you haven't navigated to the folder where the adb file is located...
Sent from my Nexus One using XDA App
danger-rat said:
That's because you haven't navigated to the folder where the adb file is located...
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Isn't it in the android-sdk-windows folder?
EDIT
nvm found it. it's in another folder....thanks
when i run adb shell, it doesn't give me a # it gives me $. what do i do?
What are you trying to do?
Sent from my Nexus One using XDA App
Trying to flash a rom on my phone (x10) and was making sure adb is working properly before i do anything. When flashing the new rom there's some bugs that require adb to fix. From my understanding "$" means i don't have su access. Thanks for the help btw. Sorry for bothering you. Just taking proper precautions.
EDIT
Sorry again. Found my answer. I forgot to unlock my device to accept superuser permissions. Thanks for your help
to check ur phone is detected by adb....
i type "adb shell" in cmd,and according 2 u i should show #.....but it shows $ to me......why?
To check connection, type "adb devices"
"adb shell" will allow you to work remotely on your device. If the $ doesn't change to #, then you don't have root access.
Sent from my Nexus One using XDA App
If your just trying to set up adb to riot your device, I put this together to make things much easier...
http://www.nexusoneforum.net/forum/...mple-sdk-setup-manual-root-guide-windows.html
Sent from my Nexus One using XDA App
Where is the Mac Specific version. Everything you posted is for windows mate!
I have a v6 stock phone, no root, no cwm. Thought I would run through the ADB manual method of root to see what happens. I get to this point...
Code:
>adb devices (verifies you are connected)
>adb push rageagainstthecage-arm5.bin /data/local/temp/rage
(if the above command fails due to read-only, type 'adb usb' then 'adb root' to validate root status, then 'adb devices' again to verify connection)
>adb push su /data/local/temp/su
>adb shell chmod 777 /data/local/temp/rage
>adb shell ./data/local/temp/rage
When I try to do the SU because I get the $ I get Permissions denied.
I know that this method does not work but I wanted to see where it fails. It appears that they may have fixed the glitch that allowed the rage exploit to work.
I also tried cubes other way and it failed as well.
Code:
Open ADB shell
Your command prompt should be "$"
Run
kill `busybox pidof adbd`
Re-run ADB shell, your command prompt should change to "#"
Just thought I would toss this out there in case someone wanted to know...
Thanks for the heads up on this good info to know when I get my rev on Saturday
Sent from my SHIFTAO5P using XDA Premium App
Haxcid said:
I have a v6 stock phone, no root, no cwm. Thought I would run through the ADB manual method of root to see what happens. I get to this point...
Just thought I would toss this out there in case someone wanted to know...
Click to expand...
Click to collapse
Mm, I went through that last night, then downgraded to the V4 software as shown by the other post - still, none of it worked for me.
Pull your SDcard out when trying to root after the downgrade. Or format the SD card. It should work then.
I wanted to ask this in the actual thread but 10 post limit...
Anyway,
I can't get any GPS lock on my I9000, Onemsomic's ICS RC3.1, JVU modem.
I tried changing the NetworkLocation.apk by following this post http://forum.xda-developers.com/showthread.php?p=21351809#post21351809
but since I have absolutely no idea how to use ADB I couldn't do the "change mode to 0644" step.
Someone help a noob?
Thanks.
Well, first off, download the *.apk provided in that post and place it on the sdcard.
adb is a command line tool, so you must insert those commands on a terminal emulator (maybe you got one installed, if not, download one from the market, I can recommend "Android Terminal Emulator").
So, open your terminal emulator and go to the directory where you placed your *.apk. this example has been wrote with the *.apk in the sdcard folder:
Code:
su
cd /mnt/sdcard
adb start-server
adb remount
adb push NetworkLocation.apk /system/app/NetworkLocation.apk
adb chmod 0644 /system/app/NetworkLocation.apk
adb reboot
Note: I wrote this example following my common sense, so I'm not completely sure if this will work!
Cheers!
AurosGamma said:
Well, first off, download the *.apk provided in that post and place it on the sdcard.
adb is a command line tool, so you must insert those commands on a terminal emulator (maybe you got one installed, if not, download one from the market, I can recommend "Android Terminal Emulator").
So, open your terminal emulator and go to the directory where you placed your *.apk. this example has been wrote with the *.apk in the sdcard folder:
Code:
su
cd /mnt/sdcard
adb start-server
adb remount
adb push NetworkLocation.apk /system/app/NetworkLocation.apk
adb chmod 0644 /system/app/NetworkLocation.apk
adb reboot
Note: I wrote this example following my common sense, so I'm not completely sure if this will work!
Cheers!
Click to expand...
Click to collapse
I get a "device not found" error after adb remount. What should I do?
hadar.shamir said:
I get a "device not found" error after adb remount. What should I do?
Click to expand...
Click to collapse
Well I have been looking here and there, and I found that adb doesn't work directly on the phone, you must use adb from your pc. So, this is what you should do from now on:
Install Java SDK
Install Android SDK
Turn on "USB Debugging" in your SGS settings
Connect the Device to the PC
And finally, use the following commands (from the PC):
Code:
// Go to the folder where you put the *.apk
cd C:\users\exampleuser\Documents\ // or /home/exampleuser/Documents/ if you're using linux
adb start-server
adb remount
adb push NetworkLocation.apk /system/app/NetworkLocation.apk
adb chmod 0644 /system/app/NetworkLocation.apk
adb reboot
Note:
The text after the double-slash ( // ), must not be written in the console, they are just comments
You need to install the SDK's because there it is where the adb tool (and tools needed by adb) is found, so, good luck!
I'm on the last step of mjphillips1981's mac toolkit for 4.4 rooting and it won't finish:
Code:
Press ENTER to finish the SlapMyMoto process.
Open a new terminal window by pressing Command+N
In the new terminal window type the following command
./adb shell echo "/data/local/tmp/install.sh" > /sys/kernel/uevent_helper
Press ENTER when you have finished the above command
I keep getting the error:
Code:
-bash: /sys/kernel/uevent_helper: No such file or directory
I've been at this all day
try this
open terminal
cd to the toolkit folder
type the following (one line at a time)
./adb shell
echo "/data/local/tmp/install.sh" > /sys/kernel/uevent_helper
I think these lines need to be separated.
Hit me up on Google+ and lets see if we can work through this.
An I would suggest that you put questions in the toolkit thread. I was just browsing and noticed this. If you put the question in the thread I get an email.
nwinston96 said:
I'm on the last step of mjphillips1981's mac toolkit for 4.4 rooting and it won't finish:
Code:
Press ENTER to finish the SlapMyMoto process.
Open a new terminal window by pressing Command+N
In the new terminal window type the following command
./adb shell echo "/data/local/tmp/install.sh" > /sys/kernel/uevent_helper
Press ENTER when you have finished the above command
I keep getting the error:
Code:
-bash: /sys/kernel/uevent_helper: No such file or directory
I've been at this all day
Click to expand...
Click to collapse
nwinston96 said:
I'm on the last step of mjphillips1981's mac toolkit for 4.4 rooting and it won't finish:
Code:
Press ENTER to finish the SlapMyMoto process.
Open a new terminal window by pressing Command+N
In the new terminal window type the following command
./adb shell echo "/data/local/tmp/install.sh" > /sys/kernel/uevent_helper
Press ENTER when you have finished the above command
I keep getting the error:
Code:
-bash: /sys/kernel/uevent_helper: No such file or directory
I've been at this all day
Click to expand...
Click to collapse
missed some commands it looks like but im not sure if anything is diffrent because your on a mac
but here is the step by step from jcase's thread
Step1)
Unzip SlapMyMoto-1,0.zip and push the jar file to your internal storage
Code:
adb push SlapMyMoto.jar /sdcard/SlapMyMoto.jar
Step2)
Use http://www.cydiaimpactor.com/ to open up a telnet session as system user on port 2222. We covered how to use Impactor and telnet in the RockMyMoto root, I won't be covering it again since this post is going to be long enough already, see here -> http://forum.xda-developers.com/show....php?t=2509590 or http://rootzwiki.com/topic/107098-ro...the-first-ota/
Connecting over telnet, and run Stage1 with this command:
Code:
dalvikvm -cp /sdcard/SlapMyMoto.jar SlapMyMoto
When the device tells you to reboot, do this manually with "adb reboot" or your power button. It will not auto reboot on this step
Step3)
Once the device has rebooted, run Impactor again and connect over telnet just like in the previous step, then run the same command
Code:
dalvikvm -cp /sdcard/SlapMyMoto.jar SlapMyMoto
Once the device has rebooted, please take the 4.4 OTA.
Step4)
Now that we are on 4.4, we can finish the process with adb shell:
Code:
adb shell
cp /sdcard/install.sh /data/local/tmp/install.sh
chmod 755 /data/local/tmp/install.sh
echo "/data/local/tmp/install.sh" > /sys/kernel/uevent_helper
dray_jr said:
missed some commands it looks like but im not sure if anything is diffrent because your on a mac
but here is the step by step from jcase's thread
Step1)
Unzip SlapMyMoto-1,0.zip and push the jar file to your internal storage
Code:
adb push SlapMyMoto.jar /sdcard/SlapMyMoto.jar
Step2)
Use http://www.cydiaimpactor.com/ to open up a telnet session as system user on port 2222. We covered how to use Impactor and telnet in the RockMyMoto root, I won't be covering it again since this post is going to be long enough already, see here -> http://forum.xda-developers.com/show....php?t=2509590 or http://rootzwiki.com/topic/107098-ro...the-first-ota/
Connecting over telnet, and run Stage1 with this command:
Code:
dalvikvm -cp /sdcard/SlapMyMoto.jar SlapMyMoto
When the device tells you to reboot, do this manually with "adb reboot" or your power button. It will not auto reboot on this step
Step3)
Once the device has rebooted, run Impactor again and connect over telnet just like in the previous step, then run the same command
Code:
dalvikvm -cp /sdcard/SlapMyMoto.jar SlapMyMoto
Once the device has rebooted, please take the 4.4 OTA.
Step4)
Now that we are on 4.4, we can finish the process with adb shell:
Code:
adb shell
cp /sdcard/install.sh /data/local/tmp/install.sh
chmod 755 /data/local/tmp/install.sh
echo "/data/local/tmp/install.sh" > /sys/kernel/uevent_helper
Click to expand...
Click to collapse
These commands are all in the toolkit. The only one that needed to be enter on individual lines is the one he listed.
I just wish he would have posted the question in the Toolkit thread so I could have helped earlier.
mjphillips1981 said:
These commands are all in the toolkit. The only one that needed to be enter on individual lines is the one he listed.
I just wish he would have posted the question in the Toolkit thread so I could have helped earlier.
Click to expand...
Click to collapse
Ok I have the toolkit for Windows but I'm not familiar with the Mac one thanks for correcting my mistake and getting him
Sent from my XT1056 using XDA Premium 4 mobile app
mjphillips1981 said:
try this
open terminal
cd to the toolkit folder
type the following (one line at a time)
./adb shell
echo "/data/local/tmp/install.sh" > /sys/kernel/uevent_helper
I think these lines need to be separated.
Hit me up on Google+ and lets see if we can work through this.
An I would suggest that you put questions in the toolkit thread. I was just browsing and noticed this. If you put the question in the thread I get an email.
Click to expand...
Click to collapse
Thanks, I think this did it. The only thing is that I had to manually reboot my phone, but it appears I am rooted as I'm able to run root-only apps. XDA wouldn't let me post on your thread because I don't have the required number of posts. Glad you came across this thread! Thanks again
nwinston96 said:
Thanks, I think this did it. The only thing is that I had to manually reboot my phone, but it appears I am rooted as I'm able to run root-only apps. XDA wouldn't let me post on your thread because I don't have the required number of posts. Glad you came across this thread! Thanks again
Click to expand...
Click to collapse
You're welcome! From what I read. Some people do experience that the phone does not reboot on its own.
Glad you got it working.
I just removed the toolkit. It's too hard to for me to get things working correctly when I do not have a consumer device to test with.