I just got my phone, i test it to see if it works and everything goes well
So now i start the process to unlock bootloader, then i get the token, the .bin and then flash it and it unlocks and restarts
Now i go and shut down the device and now it doesnt want to turn on, the screen is dead and when i connect the cable no light appears, although the device is somehow recognized by my PC when i connect it (Device Manager says My HTC)
I have tried holding power and volume down for 1 minute and nothing happens
Is there somehow to save the phone?
Did you try to longpress power when the phone is connected at pc?
Yes i have tried... In fact, the PC tries to recognize the phone in the Device Manager when i do this, but it fails and after a while it rolls back to Android 1.0 it says (I uninstalled HTC drivers)
Is there like a way to flash something to it while in this way?
When i run
fastboot devices
It says
C:\Users\Administrator\Desktop\fastboot>fastboot devices
???????????? fastboot
Or adb devices
C:\Users\Administrator\Desktop\wao>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
Poesini said:
Yes i have tried... In fact, the PC tries to recognize the phone in the Device Manager when i do this, but it fails and after a while it rolls back to Android 1.0 it says (I uninstalled HTC drivers)
Is there like a way to flash something to it while in this way?
Click to expand...
Click to collapse
if it recognizes something when you plug it in there should be way to bring it back. have you tried reinstalling the drivers?
Poesini said:
When i run
fastboot devices
It says
C:\Users\Administrator\Desktop\fastboot>fastboot devices
???????????? fastboot
Or adb devices
C:\Users\Administrator\Desktop\wao>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
Click to expand...
Click to collapse
But you can boot in fastboot?
And your bootloader is unlocked?
I dont know if its booting into fastboot mode, i just connect the phone to the PC via the cable and thats all it shows
And as far as i know i made it to get my bootloader unlocked i flashed the unlock_code.bin
Poesini said:
I dont know if its booting into fastboot mode, i just connect the phone to the PC via the cable and thats all it shows
And as far as i know i made it to get my bootloader unlocked i flashed the unlock_code.bin
Click to expand...
Click to collapse
Sorry but, your "log" said:
fastboot devices:
?????????? fastboot
Click to expand...
Click to collapse
So you're in fastboot!
Try with a flash or TWRP or CWM and report the log here.
OMG i dont know how i did it i wrote
fastboot reboot
And somehow this time it worked -_-
So your phone now running android?
No prob?
Yeah it showed battery like at 3% i guess it was too low
The thing is that it wouldnt show anything charging and no LED, but now it seems it is
Im gonna charge full and try to flash it again
Thanks !!
Probably your phone was in fastboot so you don't have the led.
However, good!
p.s. For thanking there is the button!
Poesini said:
Yeah it showed battery like at 3% i guess it was too low
The thing is that it wouldnt show anything charging and no LED, but now it seems it is
Im gonna charge full and try to flash it again
Thanks !!
Click to expand...
Click to collapse
i wouldnt charge all the way. maybe 40% and try just in case you get stuck and button combo doesnt work(i havent had it happen but people have been reporting it). you will have to wait for the battery to die to recover and if its 100% that could take a while. also people have reported the led not coming on when battery is fully dead after plugging it in
Yeah i guess so but somehow it didnt show anything and volume down + power didnt work
Related
Took my Nexus One off my cradle today to see it was locked up. Thought no biggie, I'll pull battery and restart it.
Now when it boots it comes up with four bars. Red, Green, Blue, White and the 3 skateboarding Droid Bots. I have no clue what to do now.
I was running Cyanogenmod (Forget the version, but it was 2-3 months old. I have not done anything to my phone except add the ebay app to it yesterday.
I can not get my computer to recognize it as a Nexus One anymore so I can not use Fastboot. I tried recovery from HBOOT, but keep coming up the same way.
Please Help
Ray
Picture of my Nexus One from Wifes iPhone...
I can get to FASTBOOT and when connected to USB it says FASTBOOT USB, but my computer fails to recognize the device and it goes back to FASTBOOT.
I can not turn on USB Debuging because it will not boot normal. I do not know what to do.
Weird screen, never seen that before.
Is this screen the only thing you see when you turn on the phone or do you still see the splash screen with the unlocked bootloader image prior? Have you tried booting into recovery? (holding the volume down button while turning the phone on)
Yes its the only thing I see.
I do not see anything Prior.
I have tried to boot to recovery many many times. I have 3 different results.
1. Nexus X with nothing else
2. Nexus X with Unlocked icon below
3. The screen you see
Either way, it does not move forward it just hangs. Is there a way to turn on USB debugging from FASTBOOT or HBOOT?
Ray
Russ T. Nail said:
Weird screen, never seen that before.
Is this screen the only thing you see when you turn on the phone or do you still see the splash screen with the unlocked bootloader image prior? Have you tried booting into recovery? (holding the volume down button while turning the phone on)
Click to expand...
Click to collapse
looks like the bootloader screen, thats what the rainbow screen was on the g1.
havent seen it on the nexus though so it could be something else.
Did you try a factory reset using hardware keys?
I believe you do this by holding vol-down, power and trackball for 5 secs.
That does not seem to do anything but take me to FASTBOOT
There has to be a way to turn on USB Debugging from FASTBOOT?
If you can get fastboot usb to work you could try the following (using latest amon_ra recovery.img):
Code:
fastboot boot c:\path\to\recovery.img
To boot into recovery, then use adb or try nand-ing etc.
if you get that far (recovery)
Code:
adb shell reboot normal
should take you into os.
However, the colored bars look like some pretty serious hardware failure I'd guess...
I can not get FASTBOOT USB to work. Any suggestion on how to get this working again?
Windows just says Unknown Device and uses a standard windows USB driver. I try to update the driver pointing it to android_winusb.inf but windows says no go.
Ray
check this out to help you get fastboot to work http://forum.xda-developers.com/showthread.php?t=613217
i know its titled ADB but it might help you out.
TheQue said:
I can not get FASTBOOT USB to work. Any suggestion on how to get this working again?
Windows just says Unknown Device and uses a standard windows USB driver. I try to update the driver pointing it to android_winusb.inf but windows says no go.
Ray
Click to expand...
Click to collapse
Try to enter to recovery but.... first change your microSD maybe that is the problem ... a faulty card .. Im just guessing
have you tried to contact htc or even google?theyve helped me over the phone even knowing i have an unlocked bootloader.
pvillasuso said:
Try to enter to recovery but.... first change your microSD maybe that is the problem ... a faulty card .. Im just guessing
Click to expand...
Click to collapse
not the sd card if it was a bad card it would just bootloop
if you have SDK you can see what the phone is doing with ddms
I would download SDK and install driver in SDK then you can run ddms and watch what the phone does in the realtime device log as it tries to boot
That pic reminds me of the MDA Win Mobile 5 boot screen, real similar...
Don't know how to help, keep us updated if you figure this one out.
gtrplr71 said:
I would download SDK and install driver in SDK then you can run ddms and watch what the phone does in the realtime device log as it tries to boot
Click to expand...
Click to collapse
I 2nd that. Try using ddms or logcat.
Good luck man!
What happens when you try to flash a rom?
So as you may already be aware phones like mine, (orange uk) have the fastboot locked down, and so we cant unlock the bootloader.
I for one believe it can be accessed but needs a little bit of time and research on getting it done.
This thread is aimed for brain-storming for ideas and collecting them for us to try out,
You can de-brand your phone by flashing the software from this thread
http://forum.xda-developers.com/showthread.php?t=1033193
thanks to scott4 for the first upload mirror on page 3
Any ideas on getting the bootloader up and going on locked devices please put them in here
UPDATES
We now have root access thanks to Chainfire's gingerbreak apk which is here
http://forum.xda-developers.com/showthread.php?t=1044765
If your getting "could not extract assets" from gingerbreak
try doing
xperiax10.awesome said:
cool, finally I rooted my xperia ARC
these are very simple steps(copied from different threads):
1. Install the attached apk: Gingerbreak-v1.00
after installing most people getting this error - "could not extract assets".
TO OVERCOME THIS, just copy the attached ADB.zip and extract it on your laptop (windows)
say at
E:\mobile_Xperia\ADB
goto above path in your cmd promt and types these lines (your phone should be connected to laptop in debugging mode)
E:\mobile_Xperia\ADB>adb shell rmdir /data/local/tmp
E:\mobile_Xperia\ADB>adb shell mkdir /data/local/tmp
NOW JUST INSTALL THE apk file again and click on ROOT
Click to expand...
Click to collapse
if that Fails try replacing it with rm -r /data/local/tmp
Update 2
Blagus has kindly opened up this thread here
http://forum.xda-developers.com/showthread.php?t=1063394
We need people with a SIM-FREE phone with a LOCKED bootloader to help us all out, so if thats YOU !!!
Help us poor sods with branded handsets please.
UPDATE 3
Blagus Has come out with his release (As the man who can)
Blagus said:
Omnius for SE v0.23 (30th August 2011)
Added unlocking of S1 MSM7x30 GSM/UMTS phones (testpoint connection to GND is required.)
Added bootloader unlocking for S1 MSM7x30 phones
Anyone who donated (+punk... sorry forgot username, the OP ), contact me for free unlock.
For rest, contact for price (cheaper than at official Omnius resellers).
Click to expand...
Click to collapse
You can contact him here http://forum.xda-developers.com/member.php?u=2645841
Instructions
TESTPOINT INSTRUCTIONS PROVIDED BY mooxie FROM XDA FORUM:
1 turn of the phone
2 take of the backcover
3 remove the battery and sim card
4 take of the plastic covering the test point it's a bit stuck there but the gentle if you can.
5 Find something flexible like a wire or so i used steel wire. Make bend it so you easily can put it on the test point and the ground since you need to hold it there and press the powerbutton in the next step.
6 put in the battery
7 put the wire on the test point and the ground keep it there and press the power button for a few seconds. You wont get any confirmation that it suceeded.
8 Plug in the usb cable in the phone. Windows will now search for a new driver.
If it doesn't install automaticly. Go into the device manager of windows and look up something called SEMC_HUBB think it was that name. Choose update driver and browse to your omnius\driver folder. You will get a warning that the driver isn't signed but press okay and it should install.
9 Now if everything is done right the flashing will start and you should soon have an unlocked phone
Also side note i had problems with
qhsusb_dload driver not installing correctly.
if this is your case right click update and point to the omnius folder and choose update. worked for me.
Have you tried connecting via ADB, and running the command "adb reboot fastboot"?
dh2311 said:
Have you tried connecting via ADB, and running the command "adb reboot fastboot"?
Click to expand...
Click to collapse
What does this command does beside going to the fastboot?
Rithina said:
What does this command does beside going to the fastboot?
Click to expand...
Click to collapse
Well if we can get into fastboot we can unlock the kernal, for the people stuck with not being able to do the normal way
dh2311 said:
Have you tried connecting via ADB, and running the command "adb reboot fastboot"?
Click to expand...
Click to collapse
Reboots back up as normal, also did adb devices and it was there,
Have you tried removing the simlock?
MarylandCookie said:
Have you tried removing the simlock?
Click to expand...
Click to collapse
No not sure how to do it for free, i think someone with a Japaneses version has removed it, i will PM him to ask him
Here's a thought: backup TA. Write random values to security area. If fastboot is disabled/enabled depending on TA simlock info, tampered sec. zone could give you fastboot. Then unlock bootloader and in order to get your phone back to life, restore TA.
Method should be 100% safe as long as you can write TA back.
Sent from my X8 using XDA App
Tampered units wont let the phone boot.
lollylost100 said:
Tampered units wont let the phone boot.
Click to expand...
Click to collapse
But what about flash mode and fastboot? I know they won't boot but that's why in the end TA is restored.
so now all you crazy kids with unlocked phones have root I dont suppose anyone has any more ideas about this problem do they?
I have a few more ieas;
1) I presume you have also tried
adb reboot bootloader
I haven't got my arc yet, Im just saying old ways of getting DHD into bootloader/fastboot
2)
Also, what i think was being mentioned above, Im not too sure what was being said, but on advent vega's and optimus 2x's if you wiped the boot partition, it rebooted into fastboot, because there was no OS installed.
3)
Another one to try is look for market apps that offer reboot into recovery type options and see if they work
have you tried booting your device using the S1 BOOTLOADER method and the S1 DOWNLOAD method? (power off, hold menu + plug battery, then plug cable in pc) you should see a blue LED light. (power off, hold back key + plug battery, then plug cable in pc) you should see a green LED light.
try these two methods and give us a feedback
kazuni said:
have you tried booting your device using the S1 BOOTLOADER method and the S1 DOWNLOAD method? (power off, hold menu + plug battery, then plug cable in pc) you should see a blue LED light. (power off, hold back key + plug battery, then plug cable in pc) you should see a green LED light.
try these two methods and give us a feedback
Click to expand...
Click to collapse
manage to get Green light to come up, and it installs drivers
SEMC Flash Devices installs as the drivers,
After the installation of the new drivers still no blue light
adb reboot bootloader just reboots as normal
Hi !
For me, first method makes my phone booting normaly (no led light).
With the second one, it's OK : green led light appears.
If i can help...
PS : my PC doesn't want to install drivers :-(
punkmonkey1984 said:
manage to get Green light to come up, and it installs drivers
SEMC Flash Devices installs as the drivers,
After the installation of the new drivers still no blue light
Click to expand...
Click to collapse
so that means SEMC Flash is available. Try using Flashtool and flash a UK/Global firmware, and see if it works =)
Skyseb said:
Hi !
For me, first method makes my phone booting normaly (no led light).
With the second one, it's OK : green led light appears.
If i can help...
PS : my PC doesn't want to install drivers :-(
Click to expand...
Click to collapse
Download SEUS. PC Companion doesn't install the right drivers.
kazuni said:
so that means SEMC Flash is available. Try using Flashtool and flash a UK/Global firmware, and see if it works =)
Click to expand...
Click to collapse
Already flashed global firmware,
Still locked,
I guess the lock is actually in the bootloader level, which can't be overridden by writing a ftf package.
Sorry, but no other ideas at the moment =\
??? Have you seen this post ? => http://forum.xda-developers.com/showpost.php?p=13064854&postcount=420
Edit : ok, forget it...
Sorry.
I just took my phone from repairing (at SE)
I have no Idea what SE done...
just now I tried to unlock boot loader, now my W8 can't switch on anymore
SE white logo I can't see it
tried to flash mode also can't
any developper's, senior's, or pro's
I really begging.......
try with SEUS...
gferen said:
try with SEUS...
Click to expand...
Click to collapse
tried with flash tool, seus, pcc
it can't into flash mode (pressing back button while plug in usb)
the green light not working,
se white logo not arround...
no vibrate when swith it on...
guys.......any idea please...
ok what exactly have u done when u got it back? did u make whole procedure for unlocking booloader? or direct unlock of bootloader?
gferen said:
ok what exactly have u done when u got it back? did u make whole procedure for unlocking booloader? or direct unlock of bootloader?
Click to expand...
Click to collapse
install root explorer
root using SOC1.9.1
unlockbootloader using msm7227_semc.cmd
(normally phone will restart seeral time rite??)
then on cmd (press any button to continue)(after finnish)
I not watch on screen (this time my phone died on last restart)
Please....
maybe u should try with http://forum.xda-developers.com/showthread.php?t=920746 it is app with one BIG button and do all. read tread before using do exactly as is writen. but im am noot shure what will happen if phone cannot start...
try. i wish u luck
tread on X8 forum but is linked to page i posted early in post http://forum.xda-developers.com/showthread.php?t=986697&highlight=flash+tool
p.s. i am not expert. i tell u from my own experiences
I dont thing so...because that is flash tool
my device can't get into flash mode..
maybe key combination to reset or reboot (press bla+press bla+and bla)
any idea guys??
should I pm developper?
i am not shure if there is (if i am wrong someone correct me)
anything happens when u connect phone to PC? any sounds for conecting something from windows or.... if yes then install flashtool update it and connect phone and run flashtool. automatic flash tool will tell u about your phone (at least in my case did)
if this doesnt work... u probably BRICK it totaly (hope not)
good luck
no sound anymore..
tried to do something..
press msm7227_setool2.cmd
and got this
Code:
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
error: protocol fault (no status)
adb server is out of date. killing...
* daemon started successfully *
error: device not found
adb server is out of date. killing...
* daemon started successfully *
error: device not found
error: device not found
Waiting ...
error: protocol fault (no status)
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights
.
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
error: device not found
error: device not found
error: device not found
Waiting ...
error: protocol fault (no status)
Getting ROOT rights.
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
Waiting ...
adb server is out of date. killing...
* daemon started successfully *
** daemon still not runningerror: cannot connect to daemon
Writing patched semcboot. Two step process
[COLOR="Red"]First, we need get access to semcboot area[/COLOR]
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
error: device not found
error: device not found
[COLOR="red"]Second, we need to write semcboot ;)[/COLOR]
error: device not found
error: device not found
error: device not found
Press any key to continue . . .
any chance??
Calm down... Install SEUS it Always workd for me. Try to Repair yout phone thru SEUS. If it doesent work then your phone may be dead. Oh thare is 1 more way... Plug it in the charger leave it for 2 hours to charge. Just plug it in the charger and leave it! Trust me. And than try again with SEUS and Repair thu that. How did you brick your phone? Were you trying to install a rom or what?
Spevky said:
Calm down... Install SEUS it Always workd for me. Try to Repair yout phone thru SEUS. If it doesent work then your phone may be dead. Oh thare is 1 more way... Plug it in the charger leave it for 2 hours to charge. Just plug it in the charger and leave it! Trust me. And than try again with SEUS and Repair thu that. How did you brick your phone? Were you trying to install a rom or what?
Click to expand...
Click to collapse
I tried with seus,pcc,flash tool
I charge battery using multi charger
now I'll try to leave my phone in charging mode
did u read post no 10??
I just try to unlock boot loader
Oh, ****.
I got your Pm ...
Yeah, it's good idea to charge it. Maybe just your battery is dead. Try to get a new battery which for you know its at least 50% charged.
That's the catch, I'm sure.
Get a another charged battery and put it in phone. Than try to go into flash mode.
Dare-Devil Inside said:
Oh, ****.
I got your Pm ...
Yeah, it's good idea to charge it. Maybe just your battery is dead. Try to get a new battery which for you know its at least 50% charged.
That's the catch, I'm sure.
Get a another charged battery and put it in phone. Than try to go into flash mode.
Click to expand...
Click to collapse
I tried with my brother's battery with 40%
then I tried with multi charger (charge directly to battery)
I tried charge with power plug via died phone
=same...
thank you for your time..
Than go to the rapair and ask your money beck or leave it there.. if BL unlcok is not successfull they should repair it...
I'm sorry dude :/
maybe same here http://forum.xda-developers.com/showthread.php?t=1292705
this poor gut matter:-
can't get into recovery even flash mode
no vibrate when pressing on button
no se white logo
no green led when pressing back button while plug in usb
no screen light
it died
are u got all the listed above??
hi..did you resolve your problem? my w8 is also the same position as yours...and is now at repairman ..and i afraid even he cant fix it
what means seus? sorry im newbie
all_helmy said:
what means seus? sorry im newbie
Click to expand...
Click to collapse
sonyericsson update service (SEUS)
Did you take the Back cover off and check the date your phone was manufactured eg. 11w37 etc. I unlocked my bootloader with my phones date 10w47
sent from my x8 running gingerdx
Hi. I decided to flash my Honor 3c with Cyanogenmod 12.1. My problem is that i need TWRP (now I have CWM) but i can't flash it to my device. I try to do it by SP Flash Tool, but after i connect my turned off device, I get this error:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
[H/W] Fail to download DA to baseband chip's internal SRAM!
[HINT]: 1. There's an cable communication problem between FlashTool and BootROM. 2. Target might be shutdown unexpectedly or target lost power supply.
[ACTION] 1. Try again. 2. Proceed H/W checking in download cable and target side com port. 3. Monitor if power-drop occured in target side.
Click to expand...
Click to collapse
Where is the problem? I've tried with 2 different cables and 2 different computers
Ceranzuo said:
Hi. I decided to flash my Honor 3c with Cyanogenmod 12.1. My problem is that i need TWRP (now I have CWM) but i can't flash it to my device. I try to do it by SP Flash Tool, but after i connect my turned off device, I get this error:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
[H/W] Fail to download DA to baseband chip's internal SRAM!
[HINT]: 1. There's an cable communication problem between FlashTool and BootROM. 2. Target might be shutdown unexpectedly or target lost power supply.
[ACTION] 1. Try again. 2. Proceed H/W checking in download cable and target side com port. 3. Monitor if power-drop occured in target side.
Where is the problem? I've tried with 2 different cables and 2 different computers
Click to expand...
Click to collapse
Is your phone in bootloader mode? Hold Vol down+power to enter fastboot mode and then connect your phone to PC.
If you are already doing that or the problem still persists and have an unlocked bootloader(which I am sure you have), try to flash twrp manually.
muradulislam said:
Is your phone in bootloader mode? Hold Vol down+power to enter fastboot mode and then connect your phone to PC.
Click to expand...
Click to collapse
When I do it, my phone just turns on normally.
How can I check if I have unlocked bootloader? I have unlocked it about 1 year ago, but I did full wipe yesterday.
Ceranzuo said:
When I do it, my phone just turns on normally.
How can I check if I have unlocked bootloader? I have unlocked it about 1 year ago, but I did full wipe yesterday.
Click to expand...
Click to collapse
Vol down+power should boot into fastboot. Turn off the phone, hold both until honor logo shows up, let go of power but hold vol down for about 5 sec more.
If still the same, Turn off your phone, connect USB cable to phone, hold Vol down and connect the cable to computer. It should boot into bootloader now.
If it can not boot into bootloader still, the last is to try adb but that is a bit lengthy.
In bootloader mode, it will be written on phone screen in red whether phone is locked, unlocked or relocked.
Wipe does not effect bootloader status so it's still unlocked imo.
muradulislam said:
If still the same, Turn off your phone, connect USB cable to phone, hold Vol down and connect the cable to computer. It should boot into bootloader now.
Click to expand...
Click to collapse
After this, I got this text on my screen:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite
Click to expand...
Click to collapse
Ceranzuo said:
After this, I got this text on my screen:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite
Click to expand...
Click to collapse
It did not say anything about phone unlocked in red?
muradulislam said:
It did not say anything about phone unlocked in red?
Click to expand...
Click to collapse
Nope. Maybe I was wrong and I have never unlocked it? I don't remember, but I did something when I was upgrading my phone to Android 4.4.2
Ceranzuo said:
Nope. Maybe I was wrong and I have never unlocked it? I don't remember, but I did something when I was upgrading my phone to Android 4.4.2
Click to expand...
Click to collapse
At least it should say, phone locked. Saying nothing is a phenomenon i never heard before but I usually go for newer versions. May be that's the case.
Anyways use adb to fire this command
Fastboot OEM device-info
To be sure if its locked or not.
To setup adb, download and install latest Android SDK, run the program and only download platform-tools.
Your phone is international variant and it came with locked bootloader, I am sure sp tools unlocked it coz otherwise CWM could not be flashed.
Right click platform-tools folder and select run command prompt window here and type the above command
If the bootloader is unlocked (it will tell you if it is), copy the twrp image to platform-tools folder and rename it to twrp.img and fire this command
Fastboot flash recovery twrp.img
And try to reboot into recovery after disconnecting from pc and simultaneously holding power+ Vol up.
edit: nevermind, i forghot about something...
muradulislam said:
If the bootloader is unlocked (it will tell you if it is), copy the twrp image to platform-tools folder and rename it to twrp.img and fire this command
Fastboot flash recovery twrp.img
Click to expand...
Click to collapse
Should I do this when my phone is switched off?
Ceranzuo said:
Should I do this when my phone is connected to pc or not? Switched off?
Click to expand...
Click to collapse
When your phone is connected to your pc in fastboot mode.
Lemme know how did it go, will reply back in the morning. Hope everything works fine for you.
Sent from my PLK-L01 using XDA Labs
muradulislam said:
When your phone is connected to your pc in fastboot mode.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Ok, after I typed this command, there appeared this message in window:
<waiting for any device>
Click to expand...
Click to collapse
after this I reboot into recovery mode, but there is still CWM, not TWRP
Ceranzuo said:
Ok, after I typed this command, there appeared this message in window:
<waiting for any device>
after this I reboot into recovery mode, but there is still CWM, not TWRP
Click to expand...
Click to collapse
You dont have your phone drivers installed. Google Huawei USB drivers and install them or use hisuite to install drivers for your phone.
After driver installation, do the same process again.
My bad. I assumed you would have drivers already installed
Sent from my PLK-L01 using XDA Labs
muradulislam said:
You dont have your phone drivers installed. Google Huawei USB drivers and install them or use hisuite to install drivers for your phone.
After driver installation, do the same process again.
My bad. I assumed you would have drivers already installed
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
I have already installed many drivers from different sites. I will try with hisuite
Ceranzuo said:
I have already installed many drivers from different sites. I will try with hisuite
Click to expand...
Click to collapse
Hisuite is the best option. Even if that does not work (there is a chance of that), Google Kouch's universal drivers and install those.
May have to manually install dribers if nothing works.
Lemme know how did it go. Will get back to you in the morning if nobody else came along (but someone surely will before that).
Have a nice day/night depending on your time zone
Sent from my PLK-L01 using XDA Labs
---------- Post added at 07:41 PM ---------- Previous post was at 07:31 PM ----------
Lemme get my teacher for you
@DigiGoon
Sent from my PLK-L01 using XDA Labs
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Ceranzuo said:
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Click to expand...
Click to collapse
I was awake just for your post. I think I got the problem. You need fastboot drivers imo but I would have to read a bit before I can suggest how to go about it.
Am busy tomorrow but will try to get back to you in the evening (GMT+5 time zone).
Can never be 100% sure but still I am confident, your problem has a solution. Just bear with me a day or two
Sent from my PLK-L01 using XDA Labs
Ceranzuo said:
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Click to expand...
Click to collapse
Boot into recovery mode, no matter on which recovery are you on, and execute this command:
Code:
adb devices
And see the output, if it says something like:
Code:
**some_number** recovery
then it means there is no problem in the detection of your device by PC, if it does not, then check if the micro USB socket in the device is in good condition.
And I must ask: Are you able to do any operations on device via PC after connecting it?
DigiGoon said:
Boot into recovery mode, no matter on which recovery are you on, and execute this command:
Code:
adb devices
And see the output, if it says something like:
Code:
**some_number** recovery
then it means there is no problem in the detection of your device by PC, if it does not, then check if the micro USB socket in the device is in good condition.
Click to expand...
Click to collapse
I did it and it says some number and recovery
DigiGoon said:
And I must ask: Are you able to do any operations on device via PC after connecting it?
Click to expand...
Click to collapse
In "usb storage media" or something like that? Yes, I do.
Ceranzuo said:
I did it and it says some number and recovery
Click to expand...
Click to collapse
Okay, then it means that there is no problem in the connection. You are using SP Flash tool in which mode?
Sent from my PLK-L01 using Tapatalk
Bootloader type = Oxygen (not sure if that is the proper one for the device though)
Bootloader lock = Unlocked via Xiaomi official procedure
USB Debug = Not sure, I'm starting to fear it's off though
Original issue = My phone was bricked. No sound, display or whatsoever.
What did I try?
I followed an unbrick tutorial which made me flash an Oxygen firmware file. After that I get a boot loop. Mi logo and Android loading bar appears and seems to be like that continuously.
I can't access either fastboot or recovery mode. If I try any of the two button combinations I don't even get the Mi logo screen. I see the backlight turn on and nothing happens.
I tried flashing several fastboot roms, stock roms and firmware files I could find, flashing them with different versions of MiFlash. Except for the one I described in step 1 none of them change the situation as described in 'Original issue'.
I need to use the 'test pin method' to even let the computer detect the phone in MiFlash. The phone does not get detected inADB fasboot (which makes sense, as I can't enter fastboot mode anyway).
I'm hoping someone can point me in a direction which leads me to fix my phone. I'm not sure what steps I did to even get to the point where it stopped responding in any way. It has been some time ago, but I think I flashed an Oreo firmware file just before that point.
i did tryied test point (edl mode) and i think either i connect wrong point together or my rom was wrong and my phone can not boot or show anything . when connect to charge it shows key light flashing without any picture in the screen and without any vibration after pushing power button . i either dont have acces to fastboot now . what is wrong with my phone ?
Esemtix said:
i did tryied test point (edl mode) and i think either i connect wrong point together or my rom was wrong and my phone can not boot or show anything . when connect to charge it shows key light flashing without any picture in the screen and without any vibration after pushing power button . i either dont have acces to fastboot now . what is wrong with my phone ?
Click to expand...
Click to collapse
If you find the right points you can get into edl. Did you try a cable already?
Arealhooman said:
If you find the right points you can get into edl. Did you try a cable already?
Click to expand...
Click to collapse
i dont know i connect right point together or not but my phone name changed when connect to pc with xiaomi fastboot installer and i gave my phone to a developer and he install a lot of roms with edl mode ,too but there is no change
Try using edl cable
Arealhooman said:
Try using edl cable
Click to expand...
Click to collapse
i dont need any box tool for use it ?
What do you mean?
Arealhooman said:
What do you mean?
Click to expand...
Click to collapse
boxes like flash you can connect to pc and acces more thing for connecting to your phone
i mean i wont need anything like these except edl cable ?
sorry i ask too many questions
Esemtix said:
boxes like flash you can connect to pc and acces more thing for connecting to your phone
i mean i wont need anything like these except edl cable ?
sorry i ask too many questions
Click to expand...
Click to collapse
Nah it’s k. You still need the right files, but most of the time a edl cable can get you in.
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
janus.8x said:
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
Click to expand...
Click to collapse
Someone told me the phone got hard problem .
janus.8x said:
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
Click to expand...
Click to collapse
hi . I tried to flash the phone a lot but still the phone keys light are just on when I connect the phone to charger and when I disconnected it , it is off even when I push power key
what should I do ?