Related
Hey all, I've been looking around the past few days and didn't see anything on this particular issue.
Basically, I washed my G1 and had to get a new one. The one that got washed has been starting up (slowly, and not always), but the touchscreen no longer works. I reflashed the software to hopefully alleviate any of the problems when it was starting up. My initial thought was to use fastboot to flash the backup I made on my new phone with nandroid, but the bootloader isn't working properly (I'll try a reflash of that too).
So, do any of you guys know of any other ways to bypass the startup welcome touchscreen?
Try placing your finger on the Android, press the trackball, then lift the finger and press the trackball again
Tommy
IzzeLing said:
Hey all, I've been looking around the past few days and didn't see anything on this particular issue.
Basically, I washed my G1 and had to get a new one. The one that got washed has been starting up (slowly, and not always), but the touchscreen no longer works. I reflashed the software to hopefully alleviate any of the problems when it was starting up. My initial thought was to use fastboot to flash the backup I made on my new phone with nandroid, but the bootloader isn't working properly (I'll try a reflash of that too).
So, do any of you guys know of any other ways to bypass the startup welcome touchscreen?
Click to expand...
Click to collapse
Flash the ADP1 software.
Edit: You'd still need touch for that, sorry.
The driver was all wonky, uninstalled, reinstalled, fastboot works now Flashed over to my new G1's state, but forgot to take off the lock screen... Flashing yet again. Everything should be good from here.
Edit: Alright, washing the G1 makes it wacky. The touchscreen works now after restoring it to the new G1's state. Weeeirrrdd.
Edit 2: Anddd now the touchscreen doesn't work :S
well.. when my touchscreen broke i used remote control software to control my ppc from pc .. thats one way to bypass welcome screen, but won't get you much further. I used it for making a backup from my phone.
just leave it off for a while and keep it someplace dry and warm so it can dry out.
You may try to modify build.prop in the rom you flash
ro.setupwizard.mode=DISABLED
I think it will skip the setup
Sorry can't help myself. In the laundry?
I guess I'm wondering what exactly you did. I'm assuming it didn't make it into the dryer....
If you need the data off it, you might be able to ADB pull what you want to keep. If I'm not mistaken, ADB is as close as we have to remote controlling for Android at the moment.
There may be some places around, like PPC Techs, that can do hardware repair. I'm guessing what will happen is you'll occaisionally get it to work for brief stints after reflashing or whatever, but it'll keep conking out until the hardware issue goes away/gets fixed. Hardware issues do that, printers, routers, sometimes PCs.
Not to be a naysayer, but I don't think changing out the software is going to help.
I washed my G1 (was in pocket of jeans under the water for about 90 seconds), and after that I disassembled it to let it dry. It was running fine up to the day I SPL bricked it.
Hey.. i split water on my phone.. it couldnt have been that much but the touch screen wasnt working.. thought if i factory reset it, it may started working..
I dont actually understand all the lingo you guys use.. but any ideas on how i can fix it?
J x
oh the main issue is i cant get past the touch android to continue set up... please i just want my android to work!!! J x
I'm having a similar issue... My phone randomly stopped loading android.process.acore and it's messing with my heart. The touch screen doesn't respond but I can use the trackball to navigate, and every acore process force closes instantly upon activation, such as dialer, contacts, music, etc. The wonderfully helpful people at T-Mobile instructed me to do a factory reset on my G1, and it should fix the problem.
New problem: I can't get past the "Touch me, I'm an Android logo" screen. When I click Emergency Dial, it force closes because the acore processes are still messing up. The intention today was to reload the Cupcake SPL and Radios onto the phone. The issue there is that I can't touch the screen to start the USB connection with my computer.
Anyone have any suggestions aside from paying another $130 bucks??
This will do the trick
google androidscreencast it will allow you to contol your G1 via your PC
...let me know if you have resolved android.process.acore im on the same boat and a wipe and flash has yet to solve it...
same boat for me too! wow, this is three, maybe 4 of us currently experiencing same problem!
I love screen cast. Droid explorer is great too, basically a GUI for adb, and has a plugin for screen cast. Too bad you have to be online though, I'd love to use screencast offline!
I'll update if I figure out the error problem!
Well it looks like a complete wipe and a flash back to non root status is whats gonna take to fix the android.process.acore issue. BUT now w/o root, I cant access the G1 via android screen cast...so im totally stuck on the "Touch Android to begin" screen... sucks to be me lol
I think I'm in the same boat. I didn't know about the screencast application before I did a complete wipe to stock. So I'm stuck at the "touch android" as well. This phones pretty much junk to me right now.
I wonder if any of you have tried restoring your latest back up?
Yes, no help, either on the touchscreen, or the incessant errors. I think there must be some code that checks whether the touchscreen works, and sends back an error if it doesn't. I've tried almost every combination of radios and spls mixed with several different cyanogen roms going back to 4.1, both fresh installs and nand restores.
Currently I'm running the latest cyanogen, radio and hard spl. I get errors often, and can't use the phone / dialer at all without force closing. For now texts and google voice work so I have at least some communication. Ironically, I can't even unroot because none of the spls will flash dreaimg.nbh, but that probelm is in my unresponsive bootloader thread.
Sorry to hear about your predicaments allthrottle and r1ch. Strangely you are right where I'm trying to get, I have warranty coverage to fall back on.
Hey,
My AT&T rooted nexus one is still randomly rebooting if I use 3g data. I am in Costa Rica and the 3g is on the 850 band. I also have to add the apn "kolbi3g".
So basically I can use the phone for anything and it works great, but if I add the apn and start using the 3g heavily I will get a reboot, sometimes it will reboot vibrate 7 times and I have to pull the battery. I have tried 2.1 and 2.2 rooted and not also cyanogen 6 all the same problem.
If I do *#*#4636#*#* and select the wcdma only it runs the 3g better but reboots way more, sometimes the instant I place load on the connection. However if I select wcdma "unkown" the 3g works much better I can use it sometimes 30min at a time without a problem.
So any ideas what I could try? Is there a kernel that will up the volt's a bit just help stability? Or anything else I could try? Data roaming is off, I have tried both off and on, no difference that I can tell.
Thanks a lot this is driving me crazy! Just got this phone Sunday too sick to my stomach of the thought I spend $600 on this phone if I can't get 3g to work
How about radio image???
It is currently on baseband 4.06.00.12_7. Is there a more current radio?
I came across this multiple reboot issue on a (locked) Vodafone UK Nexus.
It booted into the OS (lockscreen) and as soon as data connected it looped back to the last couple seconds of the animated Nexus logo.... and again.... and again.
I powered down the unit (battery pull), booted into bootloader (voldown+power) and selected clear storage (voldown,voldown,power) then (volup) to confirm.
This deletes the user data and you have to sign in and set up the phone again but it certainly fixed the issue. My only guess is some user data became corrupt and the kernel panicked and forced a partial reboot.
Give it a try and lemme know.
Cabarnacus said:
I came across this multiple reboot issue on a (locked) Vodafone UK Nexus.
It booted into the OS (lockscreen) and as soon as data connected it looped back to the last couple seconds of the animated Nexus logo.... and again.... and again.
I powered down the unit (battery pull), booted into bootloader (voldown+power) and selected clear storage (voldown,voldown,power) then (volup) to confirm.
This deletes the user data and you have to sign in and set up the phone again but it certainly fixed the issue. My only guess is some user data became corrupt and the kernel panicked and forced a partial reboot.
Give it a try and lemme know.
Click to expand...
Click to collapse
Just did that (had the phone plugged into wall charger), and the second I got to the home screen it rebooted then vibrated like 6 or seven times. Seems to do it worse when it is plugged in. And now it won't even boot up even after pulling the battery, it vibrates 6-7 times.
I am really worried about this, any other ideas??? I will try anything! Thanks for the help
Update! Now the phone just reboot when I do anything period with it plugged in. Just like posted in another thread on this section!
Please any ideas I am very desperate and very sick to my stomach!
Hmmm very strange.
I'm aware from what you were saying on the other thread that you've got an unlocked bootloader and you're wondering what to do on the warranty front.
If you've really tried different combinations of stock and custom firmware and having the same issue I'm tempted to say its a hardware issue.
Many people have returned their unlocked phones with no comeback from HTC some have reported that they have noticed the unlocked bootloader and have issued a motherboard repair as part of the fix because of this.
Although im unsure of the additional cost (if any) i would definitely recommend going through the warranty repair route with HTC. They won't say no and send you back the same broken phone. And who knows, if its a confirmed hardware issue they may just replace it as a goodwill gesture.
Other than that I don't have any more ideas.
A nexus support thread has a popular answer referring to the clear storage fix.
http://www.google.de/support/forum/p/android/thread?tid=40f52d29e9c4177e&hl=en
Just make sure you are definitely clearing the storage FROM THE BOOTLOADER before calling HTC. It is the first thing they will make you do before accepting a return anyway.
Cabarnacus said:
Other than that I don't have any more ideas.
A nexus support thread has a popular answer referring to the clear storage fix.
http://www.google.de/support/forum/p/android/thread?tid=40f52d29e9c4177e&hl=en
Just make sure you are definitely clearing the storage FROM THE BOOTLOADER before calling HTC. It is the first thing they will make you do before accepting a return anyway.
Click to expand...
Click to collapse
Ok thank you so much sir. I am so glad to hear that I may still have a chance at getting it replaced! It was very fullish of me to unlock it, I know, it is just that I figured it was software and could be fixed by unlocking. It is going to cost me $$$ to get this to the States, but that is life. If I still can't get it to work I will call htc and let you know what they say
Little update here. I cleared storage again and just simply disabled data, I have been using the phone for a couple of hours on work without any problems. Next thong I am going yo yty is another friends 3g similar card and see if it still reboots on that sim, if it does then I am calling HTC.
Also still open to any other ideas you guys may have.
Hi,
I have a rooted GT-i9000m (bell Galaxy S Vibrant). I used the one click lag fix to root my phone and it works fine.
A few days ago out of no where all the apps started auto closing as soon as i opened them and then both the menu and back touch buttons lit up and the screen went black. I held the power down till it rebooted only to get and error with com.android.calendar even tho I never use the app. When it finish's booting none of my installed apps are showing.
The first time it happened with com.android.app and I did a full wipe and factory reset and just reinstalled everything.
Ideally I don't want to system reset to factory settings again and lose all my files and notes that i copied back on to the phone 2days ago...
Please note I have tried clearing the data for the calendar app in settings -> apps and i cleared the calendar back up. My problem is that none of my installed apps are showing...
(Update) I also cant reinstall or update apps due to a Installation error - Insufficient storage. But there's room on both SD cards. I also set 850mb for apps when i did the one click lag fix and i don't have 850mb of apps installed.
(Update 2) I did a factory reset again this time i didn't format the internal and external SD cards. (It works like new again) Thus I got to keep all my personal files and ring tones ect. The only thing that was deleted that I didn't back up is my Notes. This leads me to my new question whats best for backing up apps on a rooted SGS (bell Vibrant)?
If anyone has answers they would be much appreciated.
i had the same problem
install rom manager from the market place
there is a option in there "Fix Permissions" just run that and it will fix it up for you
only takes 1-2min to run
Tried what you said but i cant install anything... I get Installation Error - Insufficient storage available.
I now understand the cause of the problem. I change my battery once and some times twice a day. At first I would wait for the long shut down (untill the screen goes totaly black) and then take off the back and swap out the battery. At least 3 times the phone would boot up and ask me for the network unlock code (I bought the unlock code directly from bell for 75$). I found this rather annoying so i tried just taking the battery out wile it was on (idle) and it appeared to work flawlessly at least 20-30 times before the phone would start to do an endless force close loop cycle. This kept forcing me to do a factory reset on the phone. I can only assume the one click lag fix and my disregard for the need of the shutdown before removing the battery must be all the cause of my problems.
I will try and see if my phone is more stable with out the one click lag fix.
nope that is not the cause of the problem
but it sounds like you are another victim of the lag fixes that is killing your internal SD card.
not the fault of the lag fix, it just make the problem apear sooner than later
I have been having a similar issue and I'm using Voodoo lagfix. I think it's because I took the battery out before it had completely shut down.
read this
http://forum.xda-developers.com/showthread.php?t=793404
Well the phone bit the dust today. I opened up google maps to look up an address and it crashed with the usual error. So i rebooted the phone and now it stays stuck at the boot logo. (the glowing S with both touch keys staying lit) So i did the recovery thing again but this time I had to do the Vol-up + home + power in order to get the phone working some what. IDK but it wont let me log into my google account to sync my contacts. My APN settings are correct and working and I even tried off my Wifi at home. I'll just hope its a google problem and not my phone acting up. Thanks for the pointer to the bad internal SD. That may be the problem kinda hard to prove it to Samy thoe...
I get force close errors after about 4-7 days of use. Now its gotten worse. A few days ago I was looking up an address and my phone crashed and rebooted it self. It then hug at the S boot logo for 20mins. I got to my friends apartment building to find my phone still stuck at this boot logo. I couldn't remember his apartment number or buzzer code... Normally i just check my contacts list and buzz the code. I was standing out side in the Canadian fall cold wind trying to get this phone to work... OMG i almost just smashed it on the spot. Anyways I remembered about something i had read on this forum about the recovery mode ( i had used it to root ) so i tried that out got the little menu and tried every option before having to do the dreaded factory reset. Well nothing work with the exception of the factory reset it got my phone working in about 5mins... LOL
Anyways I thought I might try upgrading the firmware when I got home. What a mistake... I cant control my phones MP3 player via my bluetooth car stereo any longer. Tried everything even a factory reset and formatting the internal and external SD's. I tried running it with out rooting it again and with out the lag fix in hopes that I wouldn't get a force close error. Wouldn't you know it about 5 hours after the factory reset un-rooted just after i finish coping over all my music. I get a force close error! So I tried again and this time the phone ran for about 30hours before it started giving me force close errors about the email now...
Sigh I've tried just about everything in my power to make this phone work. So I assumed it must be the phone... I called Samsung up to get a RMA going... Wouldn't you know it they tell me that I have to call my carrier to get it RMA/repaired. I try to explain that I bought the phone with out a contract and bought the unlock code from Bell so I could use it on Fido. They tell me to call Fido... ROFL Fido wouldn't even give me their APN settings when i got this phone so knew they would be of no help. They don't even have one android phone in their line up i tell the sammy rep. So they tell me I should go back to the Bell store I bought it from to get it repaired/RMA'ed.
I doubt Bell will be of much help but here's hoping.
Do you think my phone is broken, bad flash, buggy memory, ect and needs to be RMA'ed?
Update...
I got my phone back from repairs 2 weeks ago. They flat out replaced the phone for a new one. This was a huge headache for me because the new one wasn't unlocked. Took Bell 2 hours to get the new one unlocked wile my wife waited out side double parked downtown! (I thought it would be a quick pick up and I would be out) The blue-tooth works flawlessly again!!
Much to my dismay the replacement phone has started acting up much like my first one did. It gets several force close errors a day and has gotten to the point where it no longer can send or receive text messages (using Handcent). The stock Music Player app also force closes at random with more frequently. It looks like I got another Lemon. This time around I did NOT root, lag-fix, or flash firmware. I will be sending it for repairs as soon as I can afford to buy another phone to use wile this one is off at repairs. My back up phone is a 3~ year old Iphone3g that my son has made his... (cracked screen, vol rockers dont work, power button is jammed in, the LCD screen it self is bleeding on the top edge)
The Vibrant never let me down other than as a phone. As a divx player or using all-share it rocks! I use these features A LOT to play my 720p divx movies on any TV or the projector in the bedroom .
with that being said I might keep the phone just as a portable movie player to bring from place to place and put my sim in something more stable.
Okay, I have been having a serious issue with my D3 lately. One time, my phone just randomly rebooted, and then it would get stuck at the red "Droid Eye" screen, where it would be laggy and such after a while. Eventually the screen would time out in like 2 minutes. After it turned off, I could not get it to turn back on. Basically dead, except I could still get notifications and even a phone call. But I could not act on any of them. it's like the phone's heart is still beating, but I can't turn the screen on. I pull the battery and reboot and it does it again. SOMETIMES if I keep touching the red eye screen I can get to get to the lock screen, but the wallpaper won't load and it's basically frozen. I even tried booting into safe mode and that didn't help. I took it to Verizon, they said they've a couple other people with a similar issue on the forums. They did a factory reset, and that has been the only solution to the issue. I have had it 3 times now, and this time I'm sticking with the Blur launcher and keeping only the essential apps installed. I'm assuming this is a software issue, and I'm currently trying to figure out if it is related to a certain app that was installed. Hoping they will fix this with an update! ANYBODY ELSE HAVING THIS ISSUE? if so, any leads on another fix or what it could be?
sounds like a software issue. a factory reset doesn't do anything other than change the software.
I had a similar issue on my droid 1. it was rooted and when I installed a gingerbread from I forgot who, it got stuck at the eye, kept rebooting, and occasionally, i'd get calls and it still wouldn't work. I look forward to root.
out of curiousity, did you have to take it to the store to factory reset or is there an option for it in the bootloader(I know its locked but I have no idea to what degree)
The first time I took it to the store they did it for me, but yeah there's an option in the bootloader. Just took my back to Verizon cuz this was the 4th time it's done it, they're sending me a new one! It's okay, cuz my nice screen open 'click' sound was gone on the keyboard lol
Ok, so I bought a brand new in box Moto X from an acquaintance. After a month or two it started randomly rebooting, and after a couple of weeks of rebooting once or more per day, it died. Wouldn't power on (not even recovery). I sent it in for repair>got it back>3 days and it died again>sent it in again>got it back>1 day and it died again>sent it in again>got replacement>2-3 months later the new phone is starting the cycle again. Every time I pull it out of my pocket, the lock button doesn't work, and it's locked up on Active Display. I hold the power button and reboot it, only to have it happen again in an hour. I am doing a factory reset now--does anyone have any idea what the problem may be? what i should avoid when setting it up again?
This phone is 100% untampered with. No root, no nothing.
Please help me out. Thanks!
quaxer said:
Ok, so I bought a brand new in box Moto X from an acquaintance. After a month or two it started randomly rebooting, and after a couple of weeks of rebooting once or more per day, it died. Wouldn't power on (not even recovery). I sent it in for repair>got it back>3 days and it died again>sent it in again>got it back>1 day and it died again>sent it in again>got replacement>2-3 months later the new phone is starting the cycle again. Every time I pull it out of my pocket, the lock button doesn't work, and it's locked up on Active Display. I hold the power button and reboot it, only to have it happen again in an hour. I am doing a factory reset now--does anyone have any idea what the problem may be? what i should avoid when setting it up again?
This phone is 100% untampered with. No root, no nothing.
Please help me out. Thanks!
Click to expand...
Click to collapse
That sounds like a headache.
When were both phones manufactured? What version of KK were you running? Did you upgrade software OTA, if so what did it upgrade to?
Are you saying you never downloaded any apps? never installed anything on the phone? What services did you use? (apps.. anything, what were they?) Were there any other things you noticed out of the ordinary? What were Motorola's responses the first time they replaced the phone? What are their responses now that you are having the same issues with this replacement device?
Otherwise I'd advise you let us know what modifications (apps installed, anything) you had done and continue to do, that will give a variable context to the issue, at least. Other wise we a have an issue with no variables on the actual phone. The more information you give the higher quality the responses you can receive
bothgoodandbad said:
That sounds like a headache.
When were both phones manufactured? What version of KK were you running? Did you upgrade software OTA, if so what did it upgrade to?
Are you saying you never downloaded any apps? never installed anything on the phone? What services did you use? (apps.. anything, what were they?) Were there any other things you noticed out of the ordinary? What were Motorola's responses the first time they replaced the phone? What are their responses now that you are having the same issues with this replacement device?
Otherwise I'd advise you let us know what modifications (apps installed, anything) you had done and continue to do, that will give a variable context to the issue, at least. Other wise we a have an issue with no variables on the actual phone. The more information you give the higher quality the responses you can receive
Click to expand...
Click to collapse
1) I don't know when the phones were manufactured. Can you advise me how to tell?
2) I had a number of apps on it including WhatsApp, BBM, Toggl, SwiftKey, The Weather Network, ES File Explorer, BBC, The Economist, Espresso, Google Now Launcher, Dictionary.com, TimmyMe, MyBackup Pro, eBay, Amazon, Kayak and a few others. It's still doing the same thing after a data wipe.
3) The first three times I had trouble they had me send in the phone with no quibbles. The first two times they tried to repair it (the documentation just said "replaced component, and reflashed software"), and after two failed attempts, they simply replaced it. Now they want to start the cycle over again... asking me to send it in for repair.
When they sent me the replacement it arrived with 4.4.4. The previous phone had issues with 4.4.2 and 4.4.3 both. I am still running stock 4.4.4.
Thanks for your help
quaxer said:
1) I don't know when the phones were manufactured. Can you advise me how to tell?
2) I had a number of apps on it including WhatsApp, BBM, Toggl, SwiftKey, The Weather Network, ES File Explorer, BBC, The Economist, Espresso, Google Now Launcher, Dictionary.com, TimmyMe, MyBackup Pro, eBay, Amazon, Kayak and a few others. It's still doing the same thing after a data wipe.
3) The first three times I had trouble they had me send in the phone with no quibbles. The first two times they tried to repair it (the documentation just said "replaced component, and reflashed software"), and after two failed attempts, they simply replaced it. Now they want to start the cycle over again... asking me to send it in for repair.
When they sent me the replacement it arrived with 4.4.4. The previous phone had issues with 4.4.2 and 4.4.3 both. I am still running stock 4.4.4.
Thanks for your help
Click to expand...
Click to collapse
Thanks, hopefully your info helps someone help you better or hopefully it can help/spark someone truly seasoned in android/moto x etc to chime in
To check your manufacture date boot into your fastboot menu, check image to verify you're there.
Then choose BP Tools and then once that menu loads choose the option for UPC/Manufacture date read out, check for the date when it appears on the screen, maybe you are on a batch that has specific issues.
I've never heard of this issue, yuk sounds terrible. Goodluck! If you do end up finding answers somewhere else can you please come back here and post the resolution?
When I hit BP Tools it just reboots the phone... I don't know what's wrong???
maybe static electricity?
or do you use any cases?
maybe wrong charger?
Multiple devices, different Android versions, Sounds like an app issue to me.
If it happens frequently, then that is good in a way... You could factory reset and don't install a single app. If it doesn't act up for a couple days ..... Install about 5 apps. Go a couple days.... Install 5 more, etc... Etc. When it starts to act up, you know it's an app you recently installed, so it'll be easier to narrow down.
A logcat could help too. Search on that for how. It would likely show what happened at the time of the reboot /shutdown.
quaxer said:
1) I don't know when the phones were manufactured. Can you advise me how to tell?
2) I had a number of apps on it including WhatsApp, BBM, Toggl, SwiftKey, The Weather Network, ES File Explorer, BBC, The Economist, Espresso, Google Now Launcher, Dictionary.com, TimmyMe, MyBackup Pro, eBay, Amazon, Kayak and a few others. It's still doing the same thing after a data wipe.
3) The first three times I had trouble they had me send in the phone with no quibbles. The first two times they tried to repair it (the documentation just said "replaced component, and reflashed software"), and after two failed attempts, they simply replaced it. Now they want to start the cycle over again... asking me to send it in for repair.
When they sent me the replacement it arrived with 4.4.4. The previous phone had issues with 4.4.2 and 4.4.3 both. I am still running stock 4.4.4.
Thanks for your help
Click to expand...
Click to collapse
quaxer said:
When I hit BP Tools it just reboots the phone... I don't know what's wrong???
Click to expand...
Click to collapse
use the volume +up button (once BP Tools is highlighted) and not the power button to select BP Tools I'm assuming that's what's happening, hmm
I would send it back to Motorola again. If the issues continue, tell them you want it replaced with something else like the 2014 Moto X.
Ok -- so the issues stopped completely over Christmas vacation, but I went back to work this morning (I work in a dusty woodworking plant) with my phone in my pocket, and bang, they were back. Every time I pulled my phone out of my pocket it had powered off, and finally it didn't want to power back on. I called Moto, and this time actually got a competent rep on the line. He blamed the issues on static electricity, and I second his opinion, because the machinery I work with tends to create some static, and the dust in my pocket may exacerbate the problem (?)
Anyway, he recommended that I plug the phone in and hold the power button for 2 minutes to drain the static. Voila! It seems to have worked.
Solved for the time being. Thanks everyone for your input.
quaxer said:
Ok -- so the issues stopped completely over Christmas vacation, but I went back to work this morning (I work in a dusty woodworking plant) with my phone in my pocket, and bang, they were back. Every time I pulled my phone out of my pocket it had powered off, and finally it didn't want to power back on. I called Moto, and this time actually got a competent rep on the line. He blamed the issues on static electricity, and I second his opinion, because the machinery I work with tends to create some static, and the dust in my pocket may exacerbate the problem (?)
Anyway, he recommended that I plug the phone in and hold the power button for 2 minutes to drain the static. Voila! It seems to have worked.
Solved for the time being. Thanks everyone for your input.
Click to expand...
Click to collapse
This thread is awesome.
Also, I recommend leaving your phone on your desk/home/car when you work
Or maybe a full-body armor case or something.
Statics & electronics = bad idea. Even if you can drain it and it works, it's still hurting the components inside.
So, it's been a bit, but I just came back to this phone. I never did send it in to Moto, though it seemed to have died completely. It sat in the drawer for a couple of weeks, and now on a whim I plugged it into my computer, and it started up! I had never tried plugging it into a computer, just chargers...
BUT,
In the last 10 minutes it's been sitting here rebooting itself every 2 minutes... I guess I'll try wiping it again (It didn't do the trick last time), but this phone has serious problems.