I tried to install sgs3 without root and i bricked my phone. I tried everything to make it work again (download mode while inserting battery, odin, except the usb jig)
The battery still charges and odin can see my device ( the port is yellow) but when i try to put the originial firmware odin loops at setup connection. (i used that rom earlier and it worked but i was abble to enter download mode)
Computer recognizes phone.
Can someone help me plss :crying:
Related
Hi.
I have installed Cyanogen in my Galaxy S and i flashed back to froyo 2.2.1 . When Odin restarts the phone it hangs on black sreen before Galaxy S animated logo.
I tried flash it again with odin, but when i plug the USB cable Windows not recognice the device and i can't flash it again with Odin.
I tried it in 3 computers and the error appears again.
I was able to enter on Recovery and Download mode, but now if y try enter on recovery i get the Link error (Phone , Warning Signal and Computer).
I always can enter in download mode, but can't do anything because i can't connect it to odin..
The trouble isn't reflash, the trouble if i can't detect the mobile in ODIN
Solved.
pulling off the battery around half an hour, Windows recognizes the phone whitout problem and i can install Movistar original rom to seek for any Usb problem and send it to the service
so a couple days ago i was about to put on a custom rom to my captivate.. but first the 3 download buttons doesnt work so i put it in download via adb.. for my suprise when in download i uloaded a wrong bootloader or kernel to the phone so now every time i try to boot the phone it onl shows at&t logo then diferent samsung logo(not the original S) and loops for ever..! and if i try to connect phone to computer via usb it shows the battery power,then vibrates, then shows an empty battery with a yellow sign /!\ and a temperature meter.(all that in a loop also). any ideas? i already try making my own jig but no download mode.. ando pc only recongnize sometimes a intel flasing device instead of a phone... HELP...!
inchewazu said:
so a couple days ago i was about to put on a custom rom to my captivate.. but first the 3 download buttons doesnt work so i put it in download via adb.. for my suprise when in download i uloaded a wrong bootloader or kernel to the phone so now every time i try to boot the phone it onl shows at&t logo then diferent samsung logo(not the original S) and loops for ever..! and if i try to connect phone to computer via usb it shows the battery power,then vibrates, then shows an empty battery with a yellow sign /!\ and a temperature meter.(all that in a loop also). any ideas? i already try making my own jig but no download mode.. ando pc only recongnize sometimes a intel flasing device instead of a phone... HELP...!
Click to expand...
Click to collapse
You might need to buy a jig
Sent From My Cappy Using Tapatalk 2
mmm i made my own with the resistancees and all but it doesnt seems to work on the phone and also i havnt found something about the battery with the yellow sing and the temperature logo
inchewazu said:
so a couple days ago i was about to put on a custom rom to my captivate.. but first the 3 download buttons doesnt work so i put it in download via adb.. for my suprise when in download i uloaded a wrong bootloader or kernel to the phone so now every time i try to boot the phone it onl shows at&t logo then diferent samsung logo(not the original S) and loops for ever..! and if i try to connect phone to computer via usb it shows the battery power,then vibrates, then shows an empty battery with a yellow sign /!\ and a temperature meter.(all that in a loop also). any ideas? i already try making my own jig but no download mode.. ando pc only recongnize sometimes a intel flasing device instead of a phone... HELP...!
Click to expand...
Click to collapse
You're definitely not hard bricked since your phone still does something when it's plugged in -- so there's hope. Keep trying your homemade jig and see if that works eventually (it's very frustrating trust me). USB combos don't work for download mode?
Hello, I was trying to root and install the CM7 on my Samsung Galaxy Ace GT-S5830B. The root and the cwm installation processes worked with no problems, but when I installed the CM7 it just turned off and won't turn on again.
I can't flash a stock ROM via Odin cuz the pc won't recognize the device. It won't turn on in normal mode, downloading mode nor bootloader.
What can I do to solve this issue, please?
Thank you!
archangellz said:
Hello, I was trying to root and install the CM7 on my Samsung Galaxy Ace GT-S5830B. The root and the cwm installation processes worked with no problems, but when I installed the CM7 it just turned off and won't turn on again.
I can't flash a stock ROM via Odin cuz the pc won't recognize the device. It won't turn on in normal mode, downloading mode nor bootloader.
What can I do to solve this issue, please?
Thank you!
Click to expand...
Click to collapse
Which ROM You have flashed? If You can´t go to Recovery or Download mode, try USB JIG, if not work with JIG, I am sorry Your phone is bricked.
If Your phone can´t nothing try put out battery, connect Your Ace with usb cable (without battery), open odin, hold 3 buttons for download mode (vol.down+home+power) and WITH holding buttons put back baterry. If in Odin You can see yelow oblong with COM, You can now try flash new stock rom.
Paul Koty said:
Which ROM You have flashed? If You can´t go to Recovery or Download mode, try USB JIG, if not work with JIG, I am sorry Your phone is bricked.
If Your phone can´t nothing try put out battery, connect Your Ace with usb cable (without battery), open odin, hold 3 buttons for download mode (vol.down+home+power) and WITH holding buttons put back baterry. If in Odin You can see yelow oblong with COM, You can now try flash new stock rom.
Click to expand...
Click to collapse
I tried installing Cyanogenmod 7.2. And err, is there any other way of trying to restore the phone instead of the USB JIG, cuz I don't have any. :/
I've already tried to go on the download mode by the steps you just said (power button+vol up./down + home), but the phone seems to be dead, it won't turn on in normal mode, download mode nor recovery. As the phone won't start in the download mode, i'm not able to flash anything via ODIN.
Is there anything else I could try? What if I try to flash STOCK ROM via ADB to SD CARD using ANOTHER CELLPHONE?
Thanks for helping.
Ah, another important info is that I think the phone "died" with the USB Debugging deactivated, so I think that's why the ADB can't recognize the device, right?
archangellz said:
Hello, I was trying to root and install the CM7 on my Samsung Galaxy Ace GT-S5830B. The root and the cwm installation processes worked with no problems, but when I installed the CM7 it just turned off and won't turn on again.
I can't flash a stock ROM via Odin cuz the pc won't recognize the device. It won't turn on in normal mode, downloading mode nor bootloader.
What can I do to solve this issue, please?
Thank you!
Click to expand...
Click to collapse
Try, to downnload the drivers of the SGA, in the samnsung page, if it works, use a stock rom that don´t be a one package. Sorry for my bad english.
Wrong section!
Use Q&A Thread the next time
Can you boot into CWM?
If your device is still valid warranty send it
for service
Hello everyone I am sure that there is a lot of this thread going.
But I think mine is even worse.
the problem:
I rooted the device, everything worked fine ( did it with card reader - because my pc can not recognize the device had the problem a long time ago, somehow it worked then, but does not now, giving me the code 10 and 43
I think my USB port on the SAMSUNG might be damaged, because it does recharge but wont connect at all, tried kies, tried all the debugging modes, drivers, turning off the computer, rebooting all that stuff..)
The main problem is I flashed the cwm, rebooted, worked fine, then I clicked the do Backup thing and from then I can only go to yellow "downloading" or samsung logo, cannot even use that "Odin" because my USB is apparently damaged.. Any Ideas at all other than taking the phone and throwing it into the dumpster?
it is gt-s5830
my system is Win7-64bit
any help will be deeply appreciated ...
sincerely Fariel2012
Samsung logo freeze, cant recovery, can download mode (cant join to pc)
try with different usb cable
daniga74
Fariel2012 said:
Hello everyone I am sure that there is a lot of this thread going.
But I think mine is even worse.
the problem:
I rooted the device, everything worked fine ( did it with card reader - because my pc can not recognize the device had the problem a long time ago, somehow it worked then, but does not now, giving me the code 10 and 43
I think my USB port on the SAMSUNG might be damaged, because it does recharge but wont connect at all, tried kies, tried all the debugging modes, drivers, turning off the computer, rebooting all that stuff..)
The main problem is I flashed the cwm, rebooted, worked fine, then I clicked the do Backup thing and from then I can only go to yellow "downloading" or samsung logo, cannot even use that "Odin" because my USB is apparently damaged.. Any Ideas at all other than taking the phone and throwing it into the dumpster?
it is gt-s5830
my system is Win7-64bit
any help will be deeply appreciated ...
sincerely Fariel2012
Click to expand...
Click to collapse
Hi there
you will need to give a usb jigg service to your device and then flsah it back to stock using odin
SGA s5830 stuck @ boot logo
I follwed these steps before it stuck @ boot logo
1 rooted phone through root_S5830.zip file
2 then used 6.0.4.6-cooper_fix.zip cwm recovery
3 decided to flash Touchwiz-Resurrected_ROM_V1.0.zip rom
4 followed all steps to flash thrrough CWM recovery
phone reebots samsung.com logo>> samsung boot animation shows up>>samsung name appears again keeps glowing and phone restarts!!!
after it I tried 6-7 different roms then i tried to flash through odin but wasnt able to do so but failed the device showed up in odin but wasnt able to flash stock rom
then i decided to go for Phil touch recovery I installed Philtouch recovery and tried to flash a custom rom now I'm stuck again at boot name GALAXY ACE s5830 nothing goes further!!!
I searched over XDA and some guy quoted this problem is solvable by using odin and putting phone in downloading mode (vol- button+home button + Power on ) I am able to put my phone in downloading mode, but when i conncet it to PC it says USB device not recognized WTF!!!!!???? 10 mins ago i connected my Phone using same cable same port same odin now this ***** appears ???
I swapped PC's, Cables, ports everything nothings working , phone wont start stuck @ boot logo pls help ASAP :crying:
That's it.. You have hard bricked your phone that's dead recovery and dead download mode. Give your phone the usb jigg service which will force it to go to either the download mode or the recovery mode whatever you want.
Hi! I installed a Custom ROM 1 year ago or so and after a few attempts to unbrick my phone I gave up. Now I want to try it again and here are the things that I've tried:
First of all, the ROM was not installed in a wrong way (I've successfully installed other ROMs with the same method - no rom manager -), but I think that the creator did not specify that the ROM was not for S5830, and that might be the brick's cause. I've tried to boot the phone, but it does not do anything at all (the battery is charged, I even tried with another battery). I've downloaded Odin (different versions, in fact), and did the following sequence (1. Connect the phone, 2. Press down power+volume down+home for 10 seconds + plug the battery without letting the buttons unpressed, 3. Run Odin as administrator) but the COM Port does NOT even recognise it...
Any ideas? Thanks!
I feel your pain . .I did something similar a while ago. .
If you flashed an incorrect rom using odin, your in deep dogy do do..
but if you flashed from recovery with cwm then with luck your Ace should be recoverable.
sometimes it requires persistance to get Ace into "download" mode.
edit: also try a different cable.
Try ODIN Multi-Downloader v4.38 for Galaxy Ace(S5830)
and official firmware from SamMobile GT-S5830
Then in odin select ops cooper v1.0.ops and select file(.tar.md5) and select all options except debug only
click start