Related
Hi there,
Can someone point me to a page with kernels. I was trying to look my self under Development but I lost my self.
I'm looking for a page with a list of kernels that fit my LG optimus 2X. I'm running CyanogenMod 7.1, and I must say it's a lot better then the original ROM.
Cheers.
For cm you can choose between these kernels:
Ironkernel:
http://forum.xda-developers.com/showthread.php?t=1359307
Ironkernel (Vadonkas KANG) :
http://forum.xda-developers.com/showthread.php?t=1427646
Vorkkernel:
http://forum.xda-developers.com/showthread.php?t=1059910
SwiftExtreme:
http://forum.xda-developers.com/showthread.php?t=1325183
Personally I would recommend either two of Ironkernel to use, because Vorkkernel is in my opinion not stable enough and the development of SwiftExtreme stopped
Sent from my LG-Stone from the Prehistory....
Naaaahh... Just kidding!
CM7.2 Temasek KANG P204-30
Ironkernel (Vadonkas KANG)
I have just tried: Ironkernel:
http://forum.xda-developers.com/show....php?t=1359307
After the reboot the screen turns black and nothing happen. I cleaned the cache before!
Can you help me with that?
first don't use cm7.1 since cm 7.1 is little bit old. use kang version either temasek or koboltz cause kang (temasek one) is already built with new kernel 2.6.32.49
second if you want to flash the kernel don't choose vorkkernel because it's already not updated (no offense)
if you want to use the kernel for CM use either vadonka kernel or ironkernel they both updated.
swifthextreme nah it's already abondend by the creator
but it's all yours decision, i just give you suggestion
Hi antec123,
Can you send me a direct link to kang version?
Antec123 is right, you should try the latest KANG, here you go:
http://forum.xda-developers.com/showthread.php?t=1421425
Sent from my LG-Stone from the Prehistory....
Naaaahh... Just kidding!
CM7.2 Temasek KANG P204-30
Ironkernel (Vadonkas KANG)
SP1996AC said:
Antec123 is right, you should try the latest KANG, here you go:
http://forum.xda-developers.com/showthread.php?t=1421425
Sent from my LG-Stone from the Prehistory....
Naaaahh... Just kidding!
CM7.2 Temasek KANG P204-30
Ironkernel (Vadonkas KANG)
Click to expand...
Click to collapse
that's the link, sorry forgot to add . but make sure u backup your apps at least using titanium backup
Guys... thanks a lot for the help!
I have installed KANG's ROM and Ironkernel (Vadonkas KANG). So far it looks really good. I look forward for the next few days to see an improvement in the battery life.
Cheers.
Beyondforce.
I am also a bit lost here. I just wanted to try vadonka's kang kernel together with MIUI 2.1.6, but when I started the phone up I saw that I couldn't use Wifi anymore. It would give me an error when trying to switch it on.
I tried re-flashing vadonka's kernel and saw the output: "Checking for ROM ...., found incompatible ROM, aborting!"
Isn't it supposed to work with MIUI?
i like the ironkrnl, except the newer versions with ram hack cause a few issues..
Take me to the right way
I am also a beginner in modifying my P990. The stock rom (2.3.4) is going on my nerves so I decided to put a custom rom (temasek's KANG build P204-48) and Vadonkas KANG kernel (23-01-2012). Is it possible to backup original (stock) kernel and whether there is a need for make it? Is it possible to put stock kernel again someday?
Thanks and sorry for my eng.
Bulldog091 said:
I am also a beginner in modifying my P990. The stock rom (2.3.4) is going on my nerves so I decided to put a custom rom (temasek's KANG build P204-48) and Vadonkas KANG kernel (23-01-2012). Is it possible to backup original (stock) kernel and whether there is a need for make it? Is it possible to put stock kernel again someday?
Thanks and sorry for my eng.
Click to expand...
Click to collapse
boot into CWM and perform full backup. this will backup ure rom
I know that, what about kernel?
once you do a Nandroid backup from CWM (for stock ROM) it will do a backup to your sd card with all the components of the ROM (full backup) at that time (including kernel).
Bulldog091 said:
I know that, what about kernel?
Click to expand...
Click to collapse
all inclusive with the backup as the backup copies the files and zips them
is it required to calibrate the battery after flashing a new kernel ??or is it only required for roms???
joed14 said:
is it required to calibrate the battery after flashing a new kernel ??or is it only required for roms???
Click to expand...
Click to collapse
no it is not.
battery calibration is placebo - you can calibrate if u really want to (from cwm do delete battery stats, although if you read the link below you will understand that its b.s)
http://www.androidcentral.com/wiping-battery-stats-doesnt-improve-battery-life-says-google-engineer
Hey you all, I didn't want to post a new thread since the topic describes me well and the mentioned rom and kernel are of interest.
So I basically decided to go with your recommendations, but have a few questions that I would really appreciate if someone could answer.
I currently have CM7.1 and under kernel it says "2.6.32.45-cyanogemod [email protected] #1"... but I am dissapointed with it, so I want to install the following:
[CM7][KANG][JAN27] temasek's KANG BUILD P204-50 - Option to disable volume key beep!
[CM7/MIUI Kernel][KANG][JAN27] CM7/V20l hybrid
Now to my questions:
1. Baseband: will I need to install new baseband or is it included in any of the above or won't it get changed if I don't do it manually and in that case is baseband version "1035.21_20110622" ok??
2. Order: In what order do I install all of the above (including baseband if I should update it)? (maybe someone could point me to a beginners-guide or so). I've installed CM but it was long ago and I don't really recall having done anything with any kernel so that's completely new to me.
3. Would you recommend the above mentioned combination to get a stable Optimus 2x? (I currently experience spontaneuous reboots and can't sometime even find a 3G network, as this gets on my nervs I seek "the most stable" solution right now)
Thanks in advance!
1. A baseband flash is not necessary, only when you experience real signalcand call quality problems. Flashing a new rom +, kernel won't change your baseband at all. Make sure to get a matching RIL using the GetRIL app.
2. First flash Temaseks KANG and then flash vadonkas KANG kernel. If you're coming from CM, just wipe cache and dalvik. Otherwise wipe everything.
3. This combination is very stable in my opinion. It's also very fast and smooth and has a great battery life.
SP1996AC said:
1. A baseband flash is not necessary, only when you experience real signalcand call quality problems. Flashing a new rom +, kernel won't change your baseband at all. Make sure to get a matching RIL using the GetRIL app.
2. First flash Temaseks KANG and then flash vadonkas KANG kernel. If you're coming from CM, just wipe cache and dalvik. Otherwise wipe everything.
3. This combination is very stable in my opinion. It's also very fast and smooth and has a great battery life.
Click to expand...
Click to collapse
Thanks for the info! Flashing (2.) is simply done by using ClockworkMod Recovery?
Hi guys,
Currently i just rooted my phone and successfully install CM7 KANG by Koboltz (sorry if i spell it wrong ) ..many thanks bro for the KANGin... It really smooth and trouble free from my experience using it for 2 weeks now
Now I really want to take my O2X to the next level by try to install custom kernel on it .. and my choice is Vadonka's kernel http://forum.xda-developers.com/show....php?t=1427646
However i always failed to install the recent Update 2012.01.17 .. any version i tried I always got bootloop on CM7 logo...always stuck there and wont go in to the system.
The only Vadonka's kernel i managed to install successfully is LGE-KaNG_120109 its super smooth and stable but i got a bug that i cant play my PES 2012 on it -- PES always stuck on konami logo and then force close.
anybody have the same problem with me ?
Is there any way i cant play PES 2012 on that kernel (LGE-KaNG_120109).. or is there any settings that i need to change ?
And are there any way to know what causing bootloop on Vadonka's newest kernel ? -- maybe is there something i need to do to diagnostic this maybe ?
(yes i did all the clean / wipe stuff before and after installing) but still it bootloop on CM7 logo on newest kernel.
other than that Vadonka has created or KANG one of the best kernel i think for o2x -- at least that is what my friend said
but still thanks to Vadonka
Thanks in advance for any help guys
UPDATE:
I tried Vadonka's latest Update 2012.01.18 but it still give me bootloop on CM7 logo.
I did try to use init remover by Vadonka to remove init script
I did try to disable compcache in CM7 setting
I did wipe cache and dalvik
Still i'm not able to boot
Try temasek's kang (link in signature) maybe this will work.
I see, I will try temasek's KANG... been actually thinking ti change rom but still learning about this rom and kernel stuff.
Thanks for the advice
Sent from my Optimus 2X using XDA App
Installing Vadanko tweaks failed for me aswell :-(. My battery drain is ridiculous (think I'll just have to settle with a spare battery)
I'm running Temasek kang and it is quite good.
Sent from my Optimus 2X using xda premium
Temasek rules!...
I use "CherryPics" Kernel (for CM7/Kang) with it
May be a driver/hardware module that causes your phone to hang and some other versions? (these parts are very "ROM specific" or Kernel inclusions...)
Yes I did try to use Temasek's kang #50 now, but still unable to use Vadonka's latest kernel.
Well on the good side, Temasek's kang #50 is bullet fast and rock stable for me. .. and after applying androidon tweak its just like bullet covered in butter.
I must say many thanks to Temasek, AndroidON and surely CM team and every other coder.
But I still kinda curious to try Vadonka's kernel....hope better luck next time
Sent from my Optimus 2X using XDA App
Hmm... There was a guy who had just the same problem as you, he couldn't boot any kernel versions after 9 January, so maybe you could try this version... Try searching for it at vadonkas thread.
SP1996AC said:
Hmm... There was a guy who had just the same problem as you, he couldn't boot any kernel versions after 9 January, so maybe you could try this version... Try searching for it at vadonkas thread.
Click to expand...
Click to collapse
Vadonka's kernel on 9 January is working fine, but still got several apps wont run on it .. one example is PES 2012, which always freeze and yhen fc.
I see that he is building new kernel (ETaNa).. wonder if this one might work ? I mean is it completely new? Cause I see its said that the installer will recognize something
Sent from my Optimus 2X using XDA App
I don't know if it is completely new, AFAIK, he only give it a new name...
Same issue here, after the jan09 version, i got a bootloop. Etena version same issue.
I would like to ask if I install custom kernel that is released by vadonka (the latest one is 30 Jan). Is there any problem if I flashed hybrid revolution v3.1 with the latest one??
Flewoutthecuckoonut said:
I would like to ask if I install custom kernel that is released by vadonka (the latest one is 30 Jan). Is there any problem if I flashed hybrid revolution v3.1 with the latest one??
Click to expand...
Click to collapse
I'm not sure about this but afaik vadonka made a lot of tweak along with his kernel and that might conflict with tweak in gueste rom .. please correct me if I'm wrong.
I think its better to wait kernel only installer from vadonka or you can try temasek kernel only.
I would like to try gueste 3.1 rom but maube I'll wait for it this weekend.
Sent from my Optimus 2X using XDA App
You can try out IronKrnl . The 32MB version has been stable for me for the last two days . And I have infact patched IronKrnl with Vadonka's init.d AIO tweaks and trying that out now . Vadonka's kernel was fast when I had it on my O2X but I experienced frequent FC's with the phone radio so I reverted back to stock CM7 kernel and patched IronKrnl . Having said that I think Vadonka's kernel is likely to be newer and more optimised if it gets stable
Always take a Nandroid backup of the existing stock & stable image before flashing a new kernel . It saves a lot of a headache . And to flash a totally different kernel I would recommend you to revert to stock and then flash the new kernel . The faster way would be to revert only the boot.img file but that might leave behind some stray settings .
also i have problem with the newest etana kernel by vadonka, it makes the cpu getting hot , and dont know why
Try to flash back prior to installing vadonka's kernel. Apparently there are some issues with his current kernel that I've experienced as well so it's better off with the stock kernel.
Currently I'm stick with Temasek kang #55 and with default kernel. Its been very stable and smooth for a week now, and u don't even have charging BSOD again since I set the screen awake while charging.
Latest Temasek kang #58 is out now, and I have yet to decide if I want to use it or use Gueste 3.1
Anyone tried gueste 3.1 from CM 7 without data wipe? ? ( only cache and dalvik wipe) cause I don't want to install all my programs from scratch. Is it even possible, since gueste 3.1 is also based on CM 7 ?
Sent from my Optimus 2X using XDA App
Hi,
I've been using Gueste 3.2 hybrid revolution for a day now, and i muat admit this is the smoothest rom i ever use in my entire o2x life.
The stock lg launcher is covered with butter. I even try to install go launcher ex, and ita still very smooth like never before.
Then i say many many thanks to Mr. Temasek for his Kang efforts and Mr. Stefan for this smooth rom.
My other experience today is for the pimp my cpu app always ask for super user privilege ... I always set to allow and tick on the remember box ... but it always keep asking.
For that i maybe a noob because i don't know how to sett the proper super user... but no impact on performance whatsoever until now.
Anybody know how to use pimp my cpu ? or atleast make it not keep asking for super user privilege. ?
I'm currently using Temasek Cm 7 kernel + voodoo sound dated 7 feb 2012 .. downloaded from Temasek mediafire.
Thanks in advance
Sent from my Optimus 2X using XDA App
bekaman said:
Vadonka's kernel on 9 January is working fine, but still got several apps wont run on it .. one example is PES 2012, which always freeze and yhen fc.
I see that he is building new kernel (ETaNa).. wonder if this one might work ? I mean is it completely new? Cause I see its said that the installer will recognize something
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
Hi everybody!
Has been solved the problem with some apps and the etana kernel??
Thanks
My english is very bad because i´m spanish and i don´t know very well english :S
Hi elmenda,
I don't have any problems with my current setup (check the sig)! I haven't tried PES2012 though.
Bienvenido
Thats is very strange because I've got Etana_Hoc_lite_otf kernel and is impossible to install any pirate apps
I'm not the only who has these problem, because i've read the same error in other thread
Enviado desde mi Optimus 2X usando Tapatalk
What is the best power saving kernel for cm7.1 stable?
MaNFr3 said:
What is the best power saving kernel for cm7.1 stable?
Click to expand...
Click to collapse
Etana or swiftextreme. Search. And don't open new thread in development section but in general or Questions answer section
MaNFr3 said:
What is the best power saving kernel for cm7.1 stable?
Click to expand...
Click to collapse
I would not use CM7.1 stable, it's to old, you would be better off with a new nightly build or Temaseks Final KANG(i use it too)
ETaNa ist a good kernel, i'm running it on my device.
snel76 said:
I would not use CM7.1 stable, it's to old, you would be better off with a new nightly build or Temaseks Final KANG(i use it too)
ETaNa ist a good kernel, i'm running it on my device.
Click to expand...
Click to collapse
Where i can find it?
Sent from my Optimus 2X using XDA App
My signature . You can find both ETaNa Kernel and Temasek's KANG.
Hi,
loot at here
There are some explanations of 5 kernel
Personnally, i use ironKrn48
hoping to have you helped
bye
But those kernels can‘t be mounted on the cm7.1 stable (examples vadonka or swif) or i‘m wrong?
Sent from my Optimus 2X using XDA
Personnaly,
I use CM7 Nightly, and i run with ironkrnl 49mb ram-hack. And it's run. My baseband is 725 and my RIL is v20l. But i find that my batttery don't live a long time.
For the Others kernels, i am testing them.
Now i‘m testing 23/02 KANG build with Etana 20/02 without DS, it seems work good
Sent from my Optimus 2X using XDA
MaNFr3 said:
What is the best power saving kernel for cm7.1 stable?
Click to expand...
Click to collapse
are you looking Undervolt support version? if yes then, you should at least try swiftextreme or vadonka kernel. i know that vadonka support for UV. but it depends on your decision try to look at the android development section.
and 1 more thing, don't hope your device will same with other people. example mine can't do UV
I dont think there is a need to have a whole new thread.. this info is already floating around in the general and the dev section
Hello masters,
I have some problems with ( maybe ) my stock rom V20L. ( twice daily, sometimes more than once, i hear scrap sound or noise and after this sound dont play ( silent mode) any sound or notification, alarm just nothind
i must restart phone ... and after restart is all OK
I Want try instal new rom maybe test CyanogenMod9 ? or i need yours expression, because I do not know what to expect..
I never had custom rom. ( what is +pros or -cons for this rom )
I cant reclamation because i have Root
Sorry for english.
Hi!
At least you got root, that makes things easier...
Anyway, the thing is, you actually need to read yourself in order to choose the best rom... But, I can give you my opinion.
The best custom rom so far is in my opinion Temaseks CM7 KANG (my signature). I know CM9 is already available to us, thanks to our awesome developers , but it's still in alpha phase and not everything is working properly, So if I were you I would stick to CM7 until CM9 totally works. (which shouldn't take very long) But, it's your choice obviously...
Make sure to make a full backup though when you want to flash either CM7 or CM9, because you need to wipe everything when you come from stock...
Yeah he's right - in my opinion, try temasek's latest 71- its quite stable and awesome .....
Wipe everything after backup before flashing any rom so that everything works good
Sent from my Optimus 2X using XDA
Hi RestInPiss,
Personnaly i use CM7 nightly With kernel swiftextrem power save.
Sorry, i can't give you the links of download because i am new user.
And it's very stable
hi , the best rom is cm7 temasek 72..
make sure u do a full nandroid backup first and when u want to come back to stock rom remember to convert to ext3 filesystem first of restore the backup..
To increase the volume like stock rome use the app volume+, and to increase the camera photo and videos quality install stock camera mod by Kostia..
Hope this helps..
Cheers
I really love nova HD +. It's CM9 based and it's getting updated a the time. But there are are few things which doesn't walk perfectly.
Sent from my LG-P990 using xda premium
aokp 4.0.3 or kang 2.3.7
I use AOKP Mileston 4. In this rom there are same bugs of CM9 (no decoding/encoding video, some app for ICS are glitchy), but there rom is quite stable and smooth.
Also Temasek Kang CM7 with EtAna kernel by vadonka is a good choice =)
For me, the Chuck Norris Edition 1.1 is the most stable and fastest ROM!
Try it and luv it!
hi,
i think you should flash the rom again
I would like to install custom kernels to OC my phone but I have no idea how to.Also,Please recommend some kernels I could use.I am running Android 4.0.4 Unofficial CM9 nightly 6a.(If this thread shouldn't be here,I will delete it.)
Sent from my LG Optimus Black using xda app-developers app
hmmm....
UniversalSS said:
I would like to install custom kernels to OC my phone but I have no idea how to.Also,Please recommend some kernels I could use.I am running Android 4.0.4 Unofficial CM9 nightly 6a.(If this thread shouldn't be here,I will delete it.)
Sent from my LG Optimus Black using xda app-developers app
Click to expand...
Click to collapse
hmm...well we have the same rom and i've already tried searching for custom OC kernels for it....but i've found none :crying:
...but i've already tried different roms WITH an OC kernel if u want it, here are the links:
>>http://forum.xda-developers.com/showthread.php?t=1734312 CM7 Kang by Boype
>>http://forum.xda-developers.com/showthread.php?t=1454274 Zeus Rom
they're both cm7, so you'll have to choose if u want ics or OC.....
[edit] the info is wrong. Zeus is not cm7 but it's based on GB so they're pretty much the same[edit]
If u want to use a different kernel that is not with a rom, well sorry i don't know of some XD but i think there's a separate link just for the kernel of the Zeus rom, but it's not an OC kernel.....
to install just flash it using clockwork mod recovery by "install from zip" but make sure to make a backup first, i've had bootloops before when i flashed random kernels XD
ps: there's not much difference with or without an oc kernel, but that's just me......u should compare the difference...
...Hope i helped
Wait!
xX3m0Xx said:
hmm...well we have the same rom and i've already tried searching for custom OC kernels for it....but i've found none :crying:
...but i've already tried different roms WITH an OC kernel if u want it, here are the links:
>>http://forum.xda-developers.com/showthread.php?t=1734312 CM7 Kang by Boype
>>http://forum.xda-developers.com/showthread.php?t=1454274 Zeus Rom
they're both cm7, so you'll have to choose if u want ics or OC.....
If u want to use a different kernel that is not with a rom, well sorry i don't know of some XD but i think there's a separate link just for the kernel of the Zeus rom, but it's not an OC kernel.....
to install just flash it using clockwork mod recovery by "install from zip" but make sure to make a backup first, i've had bootloops before when i flashed random kernels XD
ps: there's not much difference with or without an oc kernel, but that's just me......u should compare the difference...
...Hope i helped
Click to expand...
Click to collapse
I forgot to mention this recent rom:
>> http://forum.xda-developers.com/showthread.php?t=1839564
Its called Mercurified by SoulExertz. Its based on CM7 also, but the difference between this and the other two roms is that it only focuses on SPEED so even without OC it's still fast, but you can overclock it to 1.2 GHz if u want you should try it out
*ahem*I am one of the pre alpha testers of the ROM.
Sent from my LG Optimus Black using xda app-developers app
xX3m0Xx said:
hmm...well we have the same rom and i've already tried searching for custom OC kernels for it....but i've found none :crying:
...but i've already tried different roms WITH an OC kernel if u want it, here are the links:
>>http://forum.xda-developers.com/showthread.php?t=1734312 CM7 Kang by Boype
>>http://forum.xda-developers.com/showthread.php?t=1454274 Zeus Rom
they're both cm7, so you'll have to choose if u want ics or OC.....
If u want to use a different kernel that is not with a rom, well sorry i don't know of some XD but i think there's a separate link just for the kernel of the Zeus rom, but it's not an OC kernel.....
to install just flash it using clockwork mod recovery by "install from zip" but make sure to make a backup first, i've had bootloops before when i flashed random kernels XD
ps: there's not much difference with or without an oc kernel, but that's just me......u should compare the difference...
...Hope i helped
Click to expand...
Click to collapse
Zeus is not CM7, it's based on stock V20s and neither would work with CM9 that you're using, sorry =(
ErnuB said:
Zeus is not CM7, it's based on stock V20s and neither would work with CM9 that you're using, sorry =(
Click to expand...
Click to collapse
oh whoops, i didn't notice that mistake XD thanks for the info
Sent from my LG Optimus Black using xda premium