Hi there,
i have Samsung Galaxy Tab 7.7 with 2.2 Froyo installed on it, my problem is that i cannot start it up, the real problem is that it starts but restarts after booting ( not at the samsung logo but when the display shows the applications that are not responding ). i tried to restore to its factory setting from boot-loader (power + vol-up buttons) wiping cache, it does say that formatting done but once it restarts it has the same problem, restarts as previously described. What comes to my mind is that probably it has some security that doesn't allow to wipe everything and get it to factory settings (if this is the case that would suck).
baseband is: P1000XXJMA
another question (probably a noob one ): is it possible to use another baseband or no?
i would appreciate any suggestion/solution to this problem!
thanks in advance!
A tab 7.7 with baseband of P1000?
Get your model right first.
You are sure it is a tab 7.7? Not tab 7"?
Btw, this is tab 7" P1000 forum.
Sent from my GT-N7100 using xda app-developers app
priyana said:
A tab 7.7 with baseband of P1000?
Get your model right first.
You are sure it is a tab 7.7? Not tab 7"?
Btw, this is tab 7" P1000 forum.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
i am sorry it is 7.0 but your reply didnt help at all could you guide me oh almighty???
Related
my tab p1000 GSM, soft bricked
followed the instruction on how to unbrick it, then it booted and got stuck on SAMSUNG logo, any piece of advice?
i downloaded the open asia XJPE from sammobile firmware page.. im from Philippines sir.
@edit:
when i tried wiping data/factory reset
it says:
formatting/data
formatting/dbdata
E:format_volume: rfs format failed on /dev/block/stl10
can someone give me enlightenment?
tnx in advance.
can you boot to download mode (vol down and power button)
I recommend just "restock" using Overcome method
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread JQ1
You can continue with the rest, and you will get Overcome 4.1 and you won't regret.
From there you can then try AOKP or CM9, all requires you to have Overcome Kernel with its CWM recovery to flash.
priyana said:
can you boot to download mode (vol down and power button)
I recommend just "restock" using Overcome method
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread JQ1
You can continue with the rest, and you will get Overcome 4.1 and you won't regret.
From there you can then try AOKP or CM9, all requires you to have Overcome Kernel with its CWM recovery to flash.
Click to expand...
Click to collapse
yes sir i can boot to download and recovery mode.. i only got stuck on samsung logo.. thank button pressed! i will try it sir. :good:
AWESOME!
^ just finished.. and it did save my wifes SGT7! cool!
xylu said:
^ just finished.. and it did save my wifes SGT7! cool!
Click to expand...
Click to collapse
well done, by the way i'm wonder how is the gt-p1000 running cm9 with 1,4gig over clock? can you post something "i dont have" that shows the main different?
thanks
Declan79 said:
well done, by the way i'm wonder how is the gt-p1000 running cm9 with 1,4gig over clock? can you post something "i dont have" that shows the main different?
thanks
Click to expand...
Click to collapse
Install no frills cpu or antutu cpu master from market
Sent from my GT-P1000 using xda app-developers app
xylu said:
Install no frills cpu or antutu cpu master from market
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I mean what was the main different between reguler and over clock one
GT-P1000|CM9(rc1)-4.0 with premium xda
Help me
Help me.I have galaxy tab SC-01C.I installed gt p1000s android 2.3 version then ics rc1 then gt p1000s android2.3 version again.Then when i charge my tablet shows like i connected my tablet via usb to computer.And it charges slow,in battery icon it shoes x mark.What should i do? SORRY FOR MY BAD ENGLISH. SOMEONE HELP ME!!!
Declan79 said:
I mean what was the main different between reguler and over clock one
GT-P1000|CM9(rc1)-4.0 with premium xda
Click to expand...
Click to collapse
Overlocked means more speed,
Sent from my GT-P1000 using xda app-developers app
Not sure what state is this
hi, i dont know what to call this. i am totally new to all this...
the goal was to install ICS on the GT-P1000. so i googled and was following instructions...
- did root using doomlord v4
- next was to run 'overocom_7_series_v4.1.-_no wipe' from Recovery mode
- recovery was android e3 so one website recommended to change to CWM.
- using Odin3-v1.85 tried to run skin1980-P101-NEW-CF_root-GB
- it didnt work so just checked -re-partion option
- learned my lesson that i shouldnt do that...and the tab is gone in a comma
so now i am not sure where i am....just tried something called soft oneclick unbrick...it didnt work...
please help....
well, did you read the whole thread on how the OP saved the P1000 ?
First, can you still go to download mode...
if so, then read my reply to OP
xylu said:
^ just finished.. and it did save my wifes SGT7! cool!
Click to expand...
Click to collapse
U mean wife's or wives'? lol jk don't get angry with me I know you're the good guy
Sent from my HTC Desire using xda app-developers app
I seriously need help
I first upgraded my samsung galaxy gt - p1000 from stock 2.3.3 to CM 10 4.1.1 jelly bean, then the mobile network did not work so I return it back to 2.3.3 then I brick it, after unbricking when I boot it to recovery mode it is reporting E: .... path unknown.. it looks that my gt-p1000 is done, i seriously need help to recover it.. pls help !!!!
Silly you.
Cm10 no mobile network, just our modem.bin in /system/vendor/
And you will be OK.
Now to recover just follow my reply to op.
Or follow this new links to overcome method , same as above but all in one place
http://forum.xda-developers.com/showthread.php?t=1881981
Sent from my GT-P1000 using xda app-developers app
Also, when you over clock your device, it gets heated up and battery drains faster
Sent from my GT-N8000 using XDA Premium HD app
Overcome is Awesome
Soft bricked my P1000, then tried all kinds of methods to unbrick, Heimdall worked, but the tab was stuck at the Samsung logo.
Installed Overcome using Odin and nows it back to new! Thanks!
hello,
a few month ago i bought a galaxy s3 and sold my samsung galaxy ace to a friend with cyanogenmod installed on it. now my friend gave me the ace asking me to remove cyanogenmod because the camera is not working and the battery is empty after just a few hours. so i tried to flash the original 2.3.6 gingerbread using odin. everything ok until i press start, odin stops doing anything at "setup connection". (kies is installed for drivers, but killed in task manager, phone is in download mode etc). i tried this on all of my USB ports and even on my old laptop, with the same outcome.
so what can i do to get cm down and original firmware on the phone? is there a way without odin or a way i can make odin working with this phone? the interesting question is, why it doesnt work now, because i flashed CM ON this phone using my pc and odin and it worked.. now its not working...
plese help me!
Try asking here --- http://forum.xda-developers.com/showthread.php?t=1689011
Sent from my GT-S5830 using xda app-developers app
hooked_on_droid said:
Try asking here --- http://forum.xda-developers.com/showthread.php?t=1689011
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
thanks my problem is solved
You're welcome
Sent from my GT-S5830 using xda app-developers app
Odin is a great app and lives up to it's name. Resurrected my phone many times with this app. Seems to run best on XP though.
A must for any sammy owner.
I have Samsung galaxy tab 8.9
Tried to root and then install CyanogenMod
turned tab off and gets stuck at Samsung galaxy tab 8.9 logo
when plugged in crashes on battery charging logo , computer does not recognise the tablet either.
tried on two different computers so....
tried to factory reset and rebooted still gets stuck
Any help would be appreciated
so confused as to what has happened
Which gt 8.9?
Which CM?
What recovery?
Did you try a hard reboot right after install?
Tried hardreboot and yes gt 8.9
The cm that I used was the one recomend for the 8.9
What can I do next?
Sent from my C5303 using xda app-developers app
Dany929 said:
Tried hardreboot and yes gt 8.9
The cm that I used was the one recomend for the 8.9
What can I do next?
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
There are 3 different 8.9's. 7300, 7310, and 7320.
There are several CM roms. 9, 10, 10.1, 10.2.
What recovery are you using?
7300
10
And clockwork
Sent from my C5303 using xda app-developers app
Dany929 said:
7300
10
And clockwork
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
Try flashing a different rom. Either C-o-m's cm10.1 or any of addem123's stable roms.
Do a full wipe, including a factory reset, wipe dalvik cache, format system partition.
If that doesn't work, I'd suggest flashing a stock rom with odin.
Will try that in the morning
Thanks for the help so far
Sent from my C5303 using xda app-developers app
Dany929 said:
Will try that in the morning
Thanks for the help so far
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
Also, you should be using either the latest cwm from c-o-m's cm10.1 thread , or twrp from the a1 kernel thread.
Sent from my LG-VM670 using xda app-developers app
Dany929 said:
I have Samsung galaxy tab 8.9
Tried to root and then install CyanogenMod
turned tab off and gets stuck at Samsung galaxy tab 8.9 logo
when plugged in crashes on battery charging logo , computer does not recognise the tablet either.
tried on two different computers so....
tried to factory reset and rebooted still gets stuck
Any help would be appreciated
so confused as to what has happened
Click to expand...
Click to collapse
Having the same issue. Were you able to solve the problem? Can you post solutions?
Thanks
I want to root my galaxy tab 3 10.1 with this tutorial
http://forum.xda-developers.com/showthread.php?t=2421594
But i want to question , My data will lost???
http://softliveupdate.blogspot.com/2013/12/how-to-root-samsung-galaxy-tab-3-101-gt.html
I see in this tutorial say "Back up all your important data and files. All data stored on the internal memory will be deleted." (But how to backup when not root?)
Thank
I suggest you ask here
http://forum.xda-developers.com/galaxy-tab-3
Currently you have posted on Tab original (P1000) forum.
Sent from my GT-P1000 using xda app-developers app
priyana said:
I suggest you ask here
http://forum.xda-developers.com/galaxy-tab-3
Currently you have posted on Tab original (P1000) forum.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Thank but first my tab 3 is 10.1 inch (wifi only) and then i'm not enought post (10 post) for reply in another thread.
I supposed that makes it fine then?
Edit: No. You can always post in the general section of the Tab 3 forum.
And if you really, really, go there, you will see for yourself
Galaxy Tab 3 10.1 Android Development
Android development for the Galaxy Tab 3 10.1
that means that whole parent forum covers all kinds of sizes of tab 3
Sent from my GT-P1000 using xda app-developers app
My galaxy tab p1000 won't boot up, I tried upgrading it and it was unsuccessful, when I try to charge it the camera flash keeps coming on and going off. Is it BRICKED or Soft BRICKED, or is there any solution. Please help and thanks in advance
Sent from my OPSSON IVO6622 using XDA Premium 4 mobile app