Related
ICS keyboard installation
1. download this file
2. put .apk on sdcard
3. use root explorer to move .apk to the /system/app folder, dont forget to click the "Mount R/W" button at the top right corner while in the /system/app folder or it may not let you move the .apk or set permissions if you dont.
4. long press on apk once moved, select "Permissions" check the top box under "read" and the top box under "write" leave the others how they were. (LOOK BELLOW)
5. reboot phone and tada!
THIS IS HOW THE PERMISSIONS SHOULD LOOK THE "X" MEANING A CHECK MARK.
R..W..E
X..X..X
X..X..X
X......X
R = READ
W = WRITE
E = EXECUTE
--------------------------------------------------------------------------------------------------------------------------------------------------
This is a very very simple installation, for thoughs of you that arnt getting it to work i really dont know what else to tell you the link above for the .apk does work i have downloaded it and followed my directions written here to a T and it installed everytime. Once again this WILL NOT work for MIUI Roms.
--------------------------------------------------------------------------------------------------------------------------------------------------
*EDIT*
changed the download host to megaupload, all the problems should be fixed now!
*EDIT # 2*
im pretty sure this does not work on MIUI. i just recently switched over to MIUI and noticed it will not work. I have tested it on cyanogen based roms like NSCollab and Cyan7 and it works great.
same as below
dont download
this is a bad file
nxt page or op for proper download
Which bixes are sypposed to be checked
They were all checked when u first looked at permissions
And will this work with non nexus s phones
Sent from my SPH-D710 using xda premium
Didn't work. Tried renaming to LATINIME.apk also and still no go.
Sent from my Nexus S using XDA App
gtuansdiamm said:
Which bixes are sypposed to be checked
They were all checked when u first looked at permissions
And will this work with non nexus s phones
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
i wouldn't see why it wouldn't work as long as your phone is running gingerbread, all of the boxes should be checked but the last box under write, all the special permission boxes should all be unchecked.
thejron said:
Didn't work. Tried renaming to LATINIME.apk also and still no go.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
you shouldnt have to rename anything, did you set the permissions correctly?
Can you post a pic of the permissions? I also tried it but it is not working
Sent from my Nexus S 4G using XDA App
i downloaded but theres a problem with file...it wont open...
Sent from my Nexus S 4G using XDA App
beanx said:
i wouldn't see why it wouldn't work as long as your phone is running gingerbread, all of the boxes should be checked but the last box under write, all the special permission boxes should all be unchecked.
Click to expand...
Click to collapse
Still didnt work
Sent from my SPH-D710 using xda premium
Thats how mine is..didnt work
Sent from my Nexus S 4G using XDA App
yea. error parsing file.
I think the original file from the op was corrrupted when he uploaded it
Sent from my SPH-D710 using xda premium
I got that but I simply just copied it to app like his instructions say
My links are bad that is confirmed by me both of them
Ill try downloading from op again
Sent from my SPH-D710 using xda premium
New good link
http://db.tt/GOm0WdAh
Sent from my SPH-D710 using xda premium
gtuansdiamm said:
New good link
http://db.tt/GOm0WdAh
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Thought it downloaded too quickly
Sent from my HTC Desire HD using xda premium
downloading....so what permissions are needed
Quinny899 said:
Thought it downloaded too quickly
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
Op's original link is bad i get 15 different files with different sizes
I tried multiple computers too
@OP how big is the file supposed to be and can u add a multiupload mirror
Sent from my SPH-D710 using xda premium
Is this how it suppose to look?
Sent from my Nexus S 4G using XDA App
I did not build this rom, I just swapped out the power profile from a stock GB rom to fix the battery drain and overheating issue and added the file to allow it to boot in safestrap3.
All thanks goes to Team Liberty for the rom and Hashcode for safestrap3 and to Endoroid for reminding me what to do to fix battery drain.
http://db.tt/1G3IfKXy
See original Liberty3 V2.0 original thread here http://forum.xda-developers.com/showthread.php?t=1366882
Sent from my DROID3 using XDA
Nice! Will definitely give this a spin.
Let's give it a try.
Thanks for the effort, man!
Sent from my XT860 using xda app-developers app
Jason Roach said:
I did not build this rom, I just swapped out the power profile from a stock GB rom to fix the battery drain and overheating issue and added the file to allow it to boot in safestrap3.
All thanks goes to Team Liberty for the rom and Hashcode for safestrap3 and to Endoroid for reminding me what to do to fix battery drain.
Click to expand...
Click to collapse
Super! Thanks, I was thinking about doing the same when I saw the posts in the other thread but didn't get around to it. I appreciate the effort.
Munckster said:
Let's give it a try.
Thanks for the effort, man!
Sent from my XT860 using xda app-developers app
Click to expand...
Click to collapse
doogald said:
Super! Thanks, I was thinking about doing the same when I saw the posts in the other thread but didn't get around to it. I appreciate the effort.
Click to expand...
Click to collapse
No problem folks. its the least i could do for all the years ive been d/l stuff from here lol. i got this working for myself out of bordum the other night and theres no reason to keep this old throwback rom to myself lol.
i hope its working ok for all who try it out, if anyone wants to reupload it somewhere with faster d/l speeds please feel free to do so and i will put the link in the first post.
I keep getting market force closes. I've tried lost of things - wiping data in the market app in settings->applications->manage applications; reflashing the ROM; wiping Dalvik; wiping data and reflashing the ROM and setting up from scratch. No matter what I do, the market FCs.
Anybody else?
doogald said:
I keep getting market force closes. I've tried lost of things - wiping data in the market app in settings->applications->manage applications; reflashing the ROM; wiping Dalvik; wiping data and reflashing the ROM and setting up from scratch. No matter what I do, the market FCs.
Anybody else?
Click to expand...
Click to collapse
I remember something about this. If you can find the original liberty thread (go back like a year) i believe there was a solution found
Sent from my DROID3 using xda premium
---------- Post added at 10:07 AM ---------- Previous post was at 09:40 AM ----------
http://forum.xda-developers.com/showthread.php?t=1366882
Start reading around post 110
Sent from my DROID3 using xda premium
Endoroid said:
I remember something about this. If you can find the original liberty thread (go back like a year) i believe there was a solution found
Sent from my DROID3 using xda premium
---------- Post added at 10:07 AM ---------- Previous post was at 09:40 AM ----------
http://forum.xda-developers.com/showthread.php?t=1366882
Start reading around post 110
Click to expand...
Click to collapse
I read all that last night - also droidforums.net. There was never a solution beyond reflash, and nobody ever reported back if they were able to solve it. I don't recall having this problem with Safestrap 1.08 when I tried Liberty before.
Oh well. I'll keep playing around. I tried the vending.apk from Maverick 4.5 but that didn't seem to help either. I also tried turning ads back on in ROM Toolbox. It may be time to go through build.prop or something.
doogald said:
I read all that last night - also droidforums.net. There was never a solution beyond reflash, and nobody ever reported back if they were able to solve it. I don't recall having this problem with Safestrap 1.08 when I tried Liberty before.
Oh well. I'll keep playing around. I tried the vending.apk from Maverick 4.5 but that didn't seem to help either. I also tried turning ads back on in ROM Toolbox. It may be time to go through build.prop or something.
Click to expand...
Click to collapse
I've used liberty off and on and I only ever had that problem the first time, and never again. Odd
Sent from my DROID3 using xda premium
doogald said:
I keep getting market force closes. I've tried lost of things - wiping data in the market app in settings->applications->manage applications; reflashing the ROM; wiping Dalvik; wiping data and reflashing the ROM and setting up from scratch. No matter what I do, the market FCs.
Anybody else?
Click to expand...
Click to collapse
Ok, I got it working. What worked for me is to skip the initial setup of Liberty by doing the four corner trick (i.e, on the "touch the Droid to begin" screen, touch the four corners of the touchable display in the order upper left, upper right, lower right, and lower left; this will skip the setup steps and bring you straight to the home screen). Touching the market after that asks you to log in to a Google account, and this successfully starts the market/play store without a force close.
Breaking my usual rule of not changing two things at once, I also switched from the first ROM slot to my third (I have three slots.) I doubt that made a difference, though.
doogald said:
Ok, I got it working. What worked for me is to skip the initial setup of Liberty by doing the four corner trick (i.e, on the "touch the Droid to begin" screen, touch the four corners of the touchable display in the order upper left, upper right, lower right, and lower left; this will skip the setup steps and bring you straight to the home screen). Touching the market after that asks you to log in to a Google account, and this successfully starts the market/play store without a force close.
Breaking my usual rule of not changing two things at once, I also switched from the first ROM slot to my third (I have three slots.) I doubt that made a difference, though.
Click to expand...
Click to collapse
Hmm, that could be why. I always skip setup via 4 corners, although back when liberty first came out I probably didn't. Although it could be coincidence, as stated in the thread, it seemed kinda random, appearing for some, and being fixed via multiple reflashing.
I've been giving some consideration to going back to liberty for awhile, switch it up. I'll put it to the test if i do
Sent from my DROID3 using xda premium
I feel the need to point out that I don't use safe strap but plain old cwm+bootstrap. I have no need to keep a stock partition, plus saftedtrsap mounts roms as loop back devices which is slower. Minimoto is much faster when it's actually my /system and not a mounted. Img
Sent from my DROID3 using xda premium
Endoroid said:
I feel the need to point out that I don't use safe strap but plain old cwm+bootstrap. I have no need to keep a stock partition, plus saftedtrsap mounts roms as loop back devices which is slower. Minimoto is much faster when it's actually my /system and not a mounted. Img
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
Do you have to change anything to get it to boot in cwm?
Sent from my DROID3 using XDA
Jason Roach said:
Do you have to change anything to get it to boot in cwm?
Sent from my DROID3 using XDA
Click to expand...
Click to collapse
Not a thing
Sent from my GT-P5110 using xda premium
Endoroid said:
Not a thing
Sent from my GT-P5110 using xda premium
Click to expand...
Click to collapse
Nice, thanks for the info
Sent from my DROID3 using XDA
doogald said:
I read all that last night - also droidforums.net. There was never a solution beyond reflash, and nobody ever reported back if they were able to solve it. I don't recall having this problem with Safestrap 1.08 when I tried Liberty before.
Oh well. I'll keep playing around. I tried the vending.apk from Maverick 4.5 but that didn't seem to help either. I also tried turning ads back on in ROM Toolbox. It may be time to go through build.prop or something.
Click to expand...
Click to collapse
I flashed it with safestrap 3.5 and everything works perfect for me. Are you sure you guys used the right gapps? Everything works on my phone.
P.S.......And thanks for updating Liberty to work with Safestrap 3.5..........
Sent from my DROID3 using Tapatalk 2
lotzakritters said:
I flashed it with safestrap 3.5 and everything works perfect for me. Are you sure you guys used the right gapps? Everything works on my phone.
P.S.......And thanks for updating Liberty to work with Safestrap 3.5..........
Sent from my DROID3 using Tapatalk 2
Click to expand...
Click to collapse
GApps are included
Sent from my DROID3 using xda premium
Endoroid said:
GApps are included
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
Oh, cool. I'm just used to flash my own GApps with Liberty, like before.
Weird, not sure why people are having an issue with it then?
Sent from my DROID3 using Tapatalk 2
lotzakritters said:
Oh, cool. I'm just used to flash my own GApps with Liberty, like before.
Weird, not sure why people are having an issue with it then?
Sent from my DROID3 using Tapatalk 2
Click to expand...
Click to collapse
You only need to flash GApps on aosp based roms like cm and aokp. This is due to legal issues, android is open source, gapps are not. Since liberty is heavily modified blur base rather than being compiled from source, gapps are included.
Sent from my DROID3 using xda premium
lotzakritters said:
I flashed it with safestrap 3.5 and everything works perfect for me. Are you sure you guys used the right gapps? Everything works on my phone.
Click to expand...
Click to collapse
Thanks, I'll have to keep that in mind. I'm not sure if there's anything in a CyanogenMod Gapps that would be bad for Liberty.
Anyway, the four corners trick works, and everything else in setup is easy to re-do. Restoring apps and WiFi access points I do with Titanium anyway, so I don't need to restore from Google.
I have to say that I set this up but went back to Minimoto because I was traveling and I wanted to have a known-good setup. I'll restart with Liberty in a day or two and see how things go.
CM10.1 Lag Fix version 2
The first version by me is baked into cm10.1 by epinter already, this is the new one.
This update is made by me and will be baked into cm10.1 (epinter) as soon as he diffs it.
This build prop works okay*for me, but not 100%!
Instructions: To apply the tweaks and scripts to CM/PAC/CARBON etc...
(1. Download the attached file below.
(2. Flash it in Clockworkmod recovery.
(3. Enjoy.
What does this do? Enable both cores on high, free a tad more ram and graphics tweaks through properties and init.d...
VERY Close to fixing 100% of the problem. But I cant get my other source to work.
Download - Codex01-CM10.1PreformanceEnhancements-3.0.1.zip
so does battery life take a hit with both cores enabled?
No, I included more than performance there's now power saving, connection, and media init.d scripts and props.
Sent from my MB886 using xda app-developers app
Thanks thats good to know about to flash now.
Update: I definitely see a performance difference.
I tried it in PAC rom and its running smooth now. I notice that after i flash this, i can't proceed to CMW recovery. Anyone has the same problem? Im planning to back up this.thanks
Sent from my MB886 using xda premium
ryuben2k said:
I tried it in PAC rom and its running smooth now. I notice that after i flash this, i can't proceed to CMW recovery. Anyone has the same problem? Im planning to back up this.thanks
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
Nope i get into CMW.
Is there a way i can recover CMW?
Sent from my MB886 using xda premium
This does make everything a bit smoother. Animation is still kinda herky-jerky but for a ROM that's been around for less than a week developed by a guy who doesn't even own one (epinter says he doesn't have an MB886 available to him), this is super impressive.
Try flashing it again @ryuben2k. What version and which model, from what I hear, the Photon 4G LTE is not a good choice of recovery. Make sure you flash the Razr HD recovery. If all goes well with the millions of init.d scripts I'm writing I'll have version 3 by tomorrow.
Is this specifically for cm10.1 or will it work for PAC rom?
Sent from my MB886 using xda app-developers app
Yes, because PAC is a port into our cm10.1 sources. @worlddominatiin
Appreciate the work your doing looking forward to v3
Sent from my MB886 using xda premium
@Swiftb12305 I'll have it up tonight for sure, something came up and I didn't feel like doing anything.
thanks! im waiting for the v3 too!
Okay might be a while because my Google site page for this got reformatted, and I'm trying to get some other stuff done, this may lead to the early to late am maybe even pm. Because of scripts for not only cm, PAC, and AOKP... But now root box too.... Hope you guys understand.
Sent from my MB886 using xda app-developers app
So later this night or tomorrow night?
No problem... I might be awake to try this out still...
I don't see any reason to not be patient...
No problem btw what will v3 include?
Sorry for my absence and delay of development, it was due to a family emergency. I'm not home right now, I'm using mobile hotspot while I'm in Daytona for a while. Hopefully I can get this project up. Please be patient while I'm syncing my sources now on my laptop.
To answer your question on what this update will contain: It will contain additional scripts in init.d, as well as a new sysctl script.
OP UPDATE: New Beta is up, not a whole lot of changes till tonight.
Sweet!
Can't wait til it's... Tonight...
For a second there, I was about to ask what's new with this upcoming version... That would have been pretty stupid...
Hello,as many of you know ,that here was no updates made for a long time ,but i was working on this ROM with the help of Adam77Root ,Ive tried a lot of different combos of the Build, a lot of logging ,testing was done,but now Ive come to point where I ask any developer to help Porting this ROM to our for 4X ,so ive decided to make this an open development and publish current build.
NOTE: THIS FOR DEVELOPERS ONLY,THE ROM IS NOT BOOTING
CURRENT STATE:
This Port is based on CM10.1 stable with no /system/app.It has - repacked kernel, many imported libs and frameworks. The ROM was stuck at bootanimation all the time ,untill the last libhw_legacy.so was added and it got stuck at LG splash .
DOWNLOADS:
HOX SENSE 5 ROM:
http://www.androidfilehost.com/?fid=23060877490001102
PORT BUILD:
https://mega.co.nz/#!qQ4W2A6T!DvelYll6Z8J_OlbvWd1YlQnonK8a_iS8KvqsbHxOzh4
Thanks to:
iodak
GalaxyUser
Adam77Root
Yea finnaly. wil try it when i am at home
(Bad english)
Sent from my LG-P880 using xda app-developers app
What is this based on? Which Android version?
4.1 Jelly Bean
going to try it in the evening
Sent from my LG-P880 using xda app-developers app
i just started the download and its about 16 min left ( i dont have good internet speed, only about 500kb/s) but ill report back and tell if this boots or not
one person reported that the rom reboots all the time,im still not home to test it.
Sent from my LG-P880 using xda app-developers app
It is more than obvious that the rom will not boot ... No hard feelings!
I wish that this was booted and with no bugs because i would definitly use it.
(only 15 Dutch so maybe bad english.)
did u changed the kernel ?
boot class path (smth like this)
Sent from my LG-P880 using xda app-developers app
tobixdev said:
did u changed the kernel ?
boot class path (smth like this)
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
iodak did it ,right now its his kernel with the bootclasspath from one x
Sent from my LG-P880 using xda app-developers app
Since you port from HOX and use Sense 4+, I assume it's the 4.1.1 version. It will be an enormous work.
Does this.boot or i need to test myself?
Sent from my LG-P880 using xda app-developers app
Small suggestion. EGL libs have no need to change also hw libs (for start) so first to get the rom booting and after that fixes...there is no need to pile all at once!
today i haven't got enough time to have a look at it sorry. i will do it before monday
You could ask dexter_nlb if he has some tipps for you.
Hope you will get that thing work
Sent from my LG-P880 using xda app-developers app
tobixdev said:
today i haven't got enough time to have a look at it sorry. i will do it before monday
You could ask dexter_nlb if he has some tipps for you.
Hope you will get that thing work
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
contacted him before this ,didnt answer yet ,priority is to get it booted now.
In reply to @Gmobilize for the PM, but others might also be interested:
This and similar ports are not impossible to do. It just needs a lot of work. We are in a good situation, because: 1. We have NEON instruction support (Nowadays almost all new devices have this, but it's a pain if one doesn't.) 2. The HOX is similar both in chipset and in screen size and resolution. 3. We have official JB.
These were the pros, now the cons: HOX JB is based on 4.1.1 and it's slightly different from 4.1.2. Many native libraries should be replaced, which should not cause a problem as the chipset is similar.
I have already worked on a port similar (Stock Samsung JB from Exynos 4 to Tegra 2, without NEON support -> it was really hard), but would not participate in this project right now (I'm intereseted, but have some other work atm.).
Regarding rumours, 4.2.2 with Sense 5 will land in July to the HOX, I would wait for that.
If you need any help with the project, I'm here. Some advices first: Don't flash the whole rom, rather do it one-by-one, i.e. first frameworks, fix the necessary natives, boot into system_server, let SystemUI and core services start app, add providers, add core apps then others. It is a time (and adb ) consuming port, but it has to be this way.
Finally is it booting?I didnt find in any post anything
GRG13 said:
Finally is it booting?I didnt find in any post anything
Click to expand...
Click to collapse
Try it
Sent from my LG-P880 using xda app-developers app
My data plan doesn't afford it.im on vacation.so I will wait until come back
Credit and Thanks
This is Android 4.4 KitKat for the MB886 Atrix HD. These are built from @dhacker, @epinter, and the rest of the razrqcom dev team's sources. All credit goes to them, I'm simply compiling the rom for the Atrix HD and sharing it with everybody else.
Warning
Before you go flashing this, be aware that it should be considered early alpha and things might not fully work. If you flash this and your phone dies, catches fire, or robs old ladies, it's on you and you've been warned.
There's also an issue with our Device Family in general where some phones just can't flash 4.4 or run it. If you're one of the unlucky one, pray that @Hashcode and @dhacker figure it out.
Info
Credits and warning out of the way, if you have a successful flash the rom works quite well and seems to be pretty stable, though I haven't done that much yet. Be aware that this doesn't have root by default, so you'll want to flash a zip to root as well.
What your're here for
Latest Deodexed Rom
Latest Odexed Rom
KitKat Rom Folder
Gapps
Odexed Gapps
Root
The gapps are PA Gapps and the root is Super SU. Credits to the PA Team and Chainfire for them.
How to enable ART
Install Odexed 4.4 and Odexed Gapps -- This is a requirement and ART only works on ODEXED ROMS....DO NOT PROCEED WITH DEODEXED
On first boot, skip entering Google username and password
Instead, go to Settings>About Phone, scroll to the bottom, and tap Build Number 7 times to enable Developer Options
Go to Developer Options>Seletc runtime and select Use ART instead of Dalvik.
After you select it it will force reboot the phone, keep that in mind so you can access recovery in time
In recovery, Wipe Cache and Dalvik Cache...boot phone
That's pretty much it. Enter your Account Information and use your phone as normal....
Don't flash dumb sh!t to /system after this....
Bugs
Weak signal strength (not for all of us, but for some it's an issue)
External SD detected as read only by certain apps (Titanium Backup for example)
Hair lice (requires Nix)
Apps don't always work or install when using ART
Front Camera doesn't work
Roaches (needs tweezers and a lighter....wait, I mean Raid)
For Some, Video playback doesn't work
Plugging and/or unplugging HDMI can cause the system to freeze up -- have to hard reset to fix (hold both volumes+power for 10 seconds)
Freaking sweet. Will be flashing to test on Sunday.
Sent from my MB886 using Tapatalk
Does data work @skeevydude and thank you for compiling it and thank you razrqcom-de-team
Sent from my MB886 using XDA Premium 4 mobile app
skeevydude said:
Credit and Thanks
This is Android 4.4 KitKat for the MB886 Atrix HD. These are built from @dhacker, @epinter, and the rest of the razrqcom dev team's sources. All credit goes to them, I'm simply compiling the rom for the Atrix HD and sharing it with everybody else.
Warning
Before you go flashing this, be aware that it should be considered early alpha and things might not fully work. If you flash this and your phone dies, catches fire, or robs old ladies, it's on you and you've been warned.
Info
Credits and warning out of the way, if you have a successful flash the rom works quite well and seems to be pretty stable, though I haven't done that much yet. Be aware that this doesn't have root by default, so you'll want to flash a zip to root as well.
What your're here for
Latest Rom
KitKat Folder
Gapps
Root
The gapps are PA Gapps and the root is Super SU. Credits to the PA Team and Chainfire for them.
Bugs
External SD not mounting.
Art causes crashes (because gapps are deodexed)
Click to expand...
Click to collapse
could not get it working but its alpha what do you expectnice to see we have development on this device for kitkat thank you and keep up the great work
sickkside13 said:
Does data work @skeevydude and thank you for compiling it and thank you razrqcom-de-team
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yep, but the signal is weak. Only tried 3g and 4g. Heard 2g might not work earlier today, haven't checked yet. My only real issue is no external sd and not being able to restore my Titanium backups.
I'll add that I installed this with cwm 6.0.4.4 & adb sideload as root on my pc....been too lazy to setup the udev rules so I gotta run adb as root. I won't say one way or another is the other recoveries work or not with this.
been wanting to run this on my HOXL but there hasnt been a rom made for it yet.
willing to move from holoblur to this rom once its fully stable.
Holly smokes I feel like breakdancing right now. Lol
Thanks to all the people involved with this and specially to our developer @skeevydude.
You guys rock....
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
SVLAN said:
Holly smokes I feel like breakdancing right now. Lol
Thanks to all the people involved with this and specially to our developer @skeevydude.
You guys rock....
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
Click to expand...
Click to collapse
dude, I haven't done much more than compile this and any one of us could have done that. Just look at the commits, dhacker and epinter get all the credit.
Chrome doesn't seem to like the Gapps you linked to, says they're malicious. Anyway, I'll be holding off on AOSP at least until someone gets the external SD working (I already tried taking it out and putting it back in like it fixed it on whatever ROM we had the problem on before, but no luck). I need my backups!
skeevydude said:
dude, I haven't done much more than compile this and any one of us could have done that. Just look at the commits, dhacker and epinter get all the credit.
Click to expand...
Click to collapse
I know bro, but you to me still my/ours developer. My point is that regardless and I know that dhacker and epinter are the guys that have made all of this possible but I also have to credit you as you deserve it since you are a strictly mb886 dev-user.
Thanks to all and you.
Just make sure is not a gay sh!t. Lol
Sent from my Atrix HD using ProBAM rom and XDA 4 Premium
So what's "Latest ROM" that cwm aborts install of every time? And then what is KitKat Folder?
Sent from my MB886 using XDA Premium 4 mobile app
I'm on CM11 from the RAZR HD and it seems to work perfectly fine other than video playback but I can live with that for now
Sent from my XT925 using xda app-developers app
EcHoFiiVe said:
I'm on CM11 from the RAZR HD and it seems to work perfectly fine other than video playback but I can live with that for now
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
What about signal strength?
Sent from my XT925 using Tapatalk
joe3681 said:
So what's "Latest ROM" that cwm aborts install of every time? And then what is KitKat Folder?
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Latest rom is the latest AOSP 4.4 I've built, KitKat Folder is the folder I have them saved to on Copy.com, ya know, so old copies are around if a newer nightly breaks something -- more of a future thing....
I didnt get any signal with xt925...great to see 4.4 so close to our device though...
OP Updated.
New rom under latest nightly
Intermediate build between yesterdays and this had partial SD support, could read but not write which is at least good enough to restore TB Backups. Not sure if this one is read only or read/write cause I'm still on the boot animation
Awesome man! Downloading it now! Thanks!
Sent from my Atrix HD using XDA Premium 4 mobile app
Updated bugs in the OP
Changed no external sd to External SD mounted as read only
Added weak signal strength
I'm gonna mess with some mount commands and see if I can't get the external sd to be read/write. Wish me luck.
At least we can restore from the external sd....better than nothing.
Great news! Thank you! I'll give it a shot. If there is at least read only - it is ok for me because I'm using card for music only.
tember1214 said:
What about signal strength?
Sent from my XT925 using Tapatalk
Click to expand...
Click to collapse
Signal strength seems to be fine, at least for me.
Sent from my XT925 using xda app-developers app