Semaphore Kernel
In this thread you may find my customized kernel 3.0.x for JB 4.2.2 rom (SlimRoms....CM10.1 and derivatives).
I hope it will be useful, and ensures better performance and battery life.
Of course, your feedback, as always, are welcome and certainly valuable
The main features are the following:
- Kernel 3.0.80
- Source Synced with latest CM changes
- Build with Custom Linaro Toolchain 4.7.4 by christopher83
- Build with Neon and -O3 Optimization
- Init.d support
- CWMR recovery
- AVS (Adaptive Voltage Scaling)
- Dynamic Fsync 1.1
- Vibrator Control ( new features from GNex )
- Optimized AES and SHA1 routines for ARM cpu architecture
- SLQB
- Optimized ARM RWSEM (read/write semaphore) algorithm
- NFS
- New RIL !!
- Very STABLE Kernel
Available CPU governors:
-Ondemand
-Interactive
-Performance
-Powersave
-Conservative
-SmartAss v2
-Lulzactive
-HYPER
-PegasusQ
-AbyssPlug
-Sakuractive
-LulzactiveW
Available I/O schedulers:
- BFQ
- CFQ
- Deadline
- Noop
- ROW
- SIO
- V(R)
Kernel Downloads for JB 4.2.2:
MOD EDIT: Link Removed
Attention this kernel work only in SlimRoms v6 or in cm10.1 rc4 and next...
How to install the kernel:
1) Download kernel zip file to sdcard or external sdcard
2) Reboot to recovery mode
3) Flash the kernel zip file
4) Wipe cache and dalvik cache
5) Fix permissions
6) Reboot the system
Changelog
Code:
Semaphore 1.0 :
Initial stable release for new roms
Source code please...adhere to GPL...and what about Nexus kernel?
Nice stable kernel! Thx! :thumbup:
Sent from my GT-I9100G using Tapatalk 2
Wow one more from ya.............:good:
Ryuinferno said:
Source code please...adhere to GPL...and what about Nexus kernel?
Click to expand...
Click to collapse
Nexus kernel cam with OC. Maybe this is just focus in stable. (Hope so)
Sent from my GT-I9100G using Tapatalk 2
bibiner said:
Nexus kernel cam with OC. Maybe this is just focus in stable. (Hope so)
Sent from my GT-I9100G using Tapatalk 2
Click to expand...
Click to collapse
yes this kernel is a stable and battery friendly...nexus kernel is perfomance kernel with oc and other tweak =)
biagio7xD said:
yes this kernel is a stable and battery friendly...nexus kernel is perfomance kernel with oc and other tweak =)
Click to expand...
Click to collapse
As asked by Ryuinferno, source code please.
thx bro
semaphore was familiar kernel of SGS right??
i'll try then.....btw,thanks bro....
biagio7xD said:
yes this kernel is a stable and battery friendly...nexus kernel is perfomance kernel with oc and other tweak =)
Click to expand...
Click to collapse
Plz dont abandon nexus kernel. I like that kernel very much
Sent from my GT-I9100G using xda premium
biagio7xD said:
yes this kernel is a stable and battery friendly...nexus kernel is perfomance kernel with oc and other tweak =)
Click to expand...
Click to collapse
Please upload the source code!
This is not for bullying you, but kernel is released under GPL license which means you can modify it but HAVE TO provide the source code, otherwise it would be illegal and a copyright infringement.
And that wouldn't be nice in xda
Sent from my GT-I9100G using xda app-developers app
I'm guessing that this is based on Slim kernel (the only kernel now that is on 3.0.80 is Slim...and his emphasis on Slim ROM) with his modifications done in Nexus...but free of OC and UV...and as I already stated before, codeworkx already modified vibration so that it can be adjusted, plus it is based on Gnex...so what makes this exclusive? It can be tweaked with Trickster MOD even before you "added" this feature...but one thing that interest me is the new RIL...so far it is only applied on the omap4 common device tree: https://github.com/Ryuinferno/andro...mmit/0641411c681ca67a26b212538955e9e08206216d ...but not the t1 kernel source...so all AOSP ROMs should have it regardless of kernel...
Ryuinferno said:
I'm guessing that this is based on Slim kernel (the only kernel now that is on 3.0.80 is Slim...and his emphasis on Slim ROM) with his modifications done in Nexus...but free of OC and UV...and as I already stated before, codeworkx already modified vibration so that it can be adjusted, plus it is based on Gnex...so what makes this exclusive? It can be tweaked with Trickster MOD even before you "added" this feature...but one thing that interest me is the new RIL...so far it is only applied on the omap4 common device tree: https://github.com/Ryuinferno/andro...mmit/0641411c681ca67a26b212538955e9e08206216d ...but not the t1 kernel source...so all AOSP ROMs should have it regardless of kernel...
Click to expand...
Click to collapse
source is the same for nexus (cyanogen source ) i update to 3.0.80 with cherry--pick by fancykernel github....
It is still not sufficient...even your Nexus kernel repo is not updated...you must at least point out what is the difference or cherry picks...keeping a Linux kernel as proprietary software is illegal...
Related
Hello guys n gals,
This is my FIRST kernel based on sources of wkpark and vadonka, kernel version 3.0.y.
This kernel is compiled by me, and comes with more added patches by me.
If you like it hit THANKS button.
Click to expand...
Click to collapse
All credits goes to:
armcee (CM7 & CM9 GOD of LG devices)
CM Team (You guys rock)
wkpark (ported kernel 3.0.26 to our devices)
vadonka (various kernel tweaks and awesome sources)
pastime (helping at various stages, and awesome fixes)
Owain (Biggest motivation for compiling 100 times a day)
and to everybody else who participated in making this possible.
Harsh Kernel P990:
Code:
Build from 3.0.37 sources.
Compiled using tweaked CodeSourcery arm Toolchain.
Better battery.
Default SIO scheduler.
Working Data Usage ICS.
Working Data Usage Limit.
Fixed USB tethering(windows).
And many tweaks.
Changelog:
Build 0510 Stock & OC
Updated Linux version 3.0.44 now.
Stock & OC version both uploaded to goo.im.
linux version 3.0.43 and 3.0.44 brings lots of changes (150+ commits hope good)
Still works for both JB and ICS both.
build 0509 Stock & OC
Compile zram as module (Thanks Benee)
Fix zram for dual core
build 0309 Stock
Linux Version 3.0.42
JellyBean[Heckfest] supported (thanks Benee)
build 0208 Stock & OC
Linux Version 3.0.39
Reverted various fixes which were implemented in 1907
Compiled with linaro toolchain on OS X
build 1907 NO-OC
Linux Version 3.0.37
Improves SIO scheduler for flash storage.
Added V(R) I/O Scheduler. (select if from AnTuTu CPU Master)
other various fixes (thanks to vork[benee] and faux123)
build 1006 Stock & OC
Linux Version 3.0.34
Patches from NVIDIA for cpu control (power saving)
Lowmemory killer from linux 3.4 ported by vork (thanks benee)
build 0306 Stock
Some patches from Benee (vork)
And tegra OTG try update.
build 2205 Stock
Linux Version 3.0.32
Re-enabled ext3 ability (fix unsupported file system problem)
Increased XZ compression usage.
build 1505 Stock & OC
Added Force Fast Charging patch by Chad Froebel
Lots of tegra related v21 source drop fixes, thanks to faux123
New wifi code change, from v21 sources
As usual few kernel config changes (still have to find minimum config )
build 0805 Stock & OC
Linux Version 3.0.31
Battery heat protection (thanks wkpark)
And few more kernel config changes
build 0405 Stock & OC
v21y battery driver (thanks vadonka)
too many kernel config changes (100s of changes)
pmem size reduced (let me know 4 mb change can make difference or not)
build 2804 No-OC
Linux 3.0.30 sources
First attempt for CpuSpy to work
build 2704 Stock & OC
rmcc's tegra_odm_touch: More ICS-compatibility
Catalin Marinas: Kmemleak patches
build 2504
Updated to Linux 3.0.29
Scheduler Tweak
Scheduler multi-core support
build 1904
ZRAM compression changed from LZO to Google's SNAPPY (~2x faster)
ZRAM disksize set to 64mb
SNAPPY KERNEL
build 1504
Changelog for build 1504 is only for information kernel already in KANG 40
SAME KERNEL AS IN Owain's Kang 40, so no flash needed on it.
Build from linux 3.0.28 sources
USB Mass Storage support for both SD Cards (ROM required to make it work)
XZ Compression, so even smaller size of zips
zram enabled and allocated
And many small changes that are not stated here.
build 1104
Lower TouchLED Brightness
Kernel refresh, compiled with new toolchain
build 0604
SD Card IO speed fixed (thanks again wkpark)
Nothing much, just some cosmetic fixes in code
build 0504
Using AnyKernel by koush (easy flash for all ICS roms.)
Added Voodoo again
Fajarep BL values (better battery)
build ReBorn 0304
upgraded Linux kernel source version 3.0.27
various MMC tweak and safepoints
pastime .config fix for support voltage unit in uV
build ReBorn 0204-1
fixed WiFi not turning on
WiFi was not loading up before, NOW FIXED
build ReBorn 0204
ReBorn: used clean wkpark's sources
added patches handpicked (new branch).
removed voodoo sound.
better bettery & speed
build 3003
proper suspend (wkpark original work)
build 2903
latest wkpark's merge fixes (thanks)
pastime1971's fixes
build 2703-1
latest wkpark's fixes he posted. (thanks again)
Fixed reboot issue
build 2703
some more kernel config changes.
pastime kernel pull fix.
build 2503-3
some kernel config changes.
spica1234 call quality improvement patch
Compiled with more hard flags, faster compilation.
build-2503
Updated to kernel 3.0.26 (thanks vadonka)
Added Simple I/O scheduler as default
and few kernel config tweaks
build-2403-4
Removed Kernel Debugs (further cleaning)
implemented hard float in order to reduce compile time
added ramdisk tweaks
build-2403-2
Implemented cache (first try to improve performance)
improved gps (source wkpark)
build-2403-1
Fixed Internal Storage problems(thanks to wkpark)
few compiling fixes, cleaner build.
build-2303
Initial sources.
Added usb tethering
Fixed Data Usage and Limit
Added Voodoo Sound
Selfcompiled linaro toolchain
Understanding build number:
build-ddmm-n
where dd=date, mm=month & n=compile number [start from 0/none]
Known bugs:
No HW Acceleration (Nvidia and LG at fault)
Reboot/Reboot recovery work 90% of time.
Download OC 0510 [ICS/JB] Link: Goo.im
Download NO-OC 0510 [ICS/JB] Link: Goo.im
My PIZZA suppliers (Donators, thanks a lot)
Owain van Brakel
Warren (djvoleur)
Gregory Martinson
Vu Phan
John(aragorn7)
Click to expand...
Click to collapse
sourcecode
thanks mate for your work. downloading and trying.
Awesome man!
Another one to look out...
I love you guys all, will try it ASAP.
---------- Post added at 12:47 AM ---------- Previous post was at 12:30 AM ----------
Already one suggestion... if you can make internal SD to mount as emmc like in all CM kernels?
Internal SD isn't mounted at all.
I lost my internal Sd...
Vold.fstab and build.prop looks alright
Ideas?
HerrKuk said:
I lost my internal Sd...
Vold.fstab and build.prop looks alright
Ideas?
Click to expand...
Click to collapse
same problem here...
Sent from my LG-P990 using Tapatalk 2 Beta-2
ehmjay said:
same problem here...
Sent from my LG-P990 using Tapatalk 2 Beta-2
Click to expand...
Click to collapse
Guys I try to fix it. Seem like another problem to solve
Harsh said:
Guys I try to fix it. Seem like another problem to solve
Click to expand...
Click to collapse
another one: i had a reboot during web browsing..
Sent from my LG-P990 using Tapatalk 2 Beta-2
ehmjay said:
another one: i had a reboot during web browsing..
Sent from my LG-P990 using Tapatalk 2 Beta-2
Click to expand...
Click to collapse
Can you get a log?
I am using this kernel since whole day, no reboot yet. No calls bosd either.
Harsh said:
Can you get a log?
I am using this kernel since whole day, no reboot yet. No calls bosd either.
Click to expand...
Click to collapse
maybe just a rare case.. ill try to reproduce
Sent from my LG-P990 using Tapatalk 2 Beta-2
question, if I make a nandroid and flash the kernel I can go back to 'stock' cm whenever I want right? cause stock is actually really stable here.
Sent from my LG-P990 using XDA
eniux said:
question, if I make a nandroid and flash the kernel I can go back to 'stock' cm whenever I want right? cause stock is actually really stable here.
Sent from my LG-P990 using XDA
Click to expand...
Click to collapse
Yes always
found a solution, its ramdisk, it is setting up PHONE_STORAGE as emmc on init, but in my kernel it should be SECONDARY_STORAGE as emmc.
^Will you integrate your kernel with your rom and also put PDroid in it?
Sorry for having so many request.
Flashed the kernel, no problems encountered so far. Good job and I like the fact that there are just 2 files that get flashed. The boot.img and wireless.ko, easy to revert without leaving back files. please keep it simple and clean. Create extra zip for all tweaks if you want them instead of bundling in kernel. Thank you.
after an hour of testing in have to say it works well, ill try a full day with it
Sent from my LG-P990 using XDA
is it connecting to hidden wlan networks?
had problems with other 3.x kernels.
edit: it works!
build-2403-1 online, link in OP
change log:
Fixed Internal Storage problems(thanks to wkpark)
few compiling fixes, cleaner build.
eyronic said:
^Will you integrate your kernel with your rom and also put PDroid in it?
Sorry for having so many request.
Click to expand...
Click to collapse
Sorry to say that, here just kernel.
You can flash PDroid ROM from pastime. I will look for things if kernel modification needed.
Else just flash rom from pastime.
harsh bhai kem cho?
Congrets, it works amazing
ANDROID KERNEL KANG PROJECT.
By AKKP Team.
Intro.
The seamless connection of C/C++ into the world's most advanced mobile Operating system. Cherry picked for more desire of power, feature and speed.
DISCLAIMER
Code:
Your warranty is now void.
I am not responsible for whatsoever happening to your phone.
Flame me? I laugh. :D
Git - Full Source Code distribution
Changelog
Preview 1 - Week 2
- Governor: Push all governors from ARM.
- Scheduler: Pull SIO 2013
- RAM: Enable RAMHack
- RAM: Enable 96MB zRAM
- CPU: Enable undervolt to CPU Master
- Support: Star. Hub add support for AnTuTu CPU Master
- HW: Tweaks to aat2870_bl.c
- HW: LTO Download Mode
- Fsync: enable by default
- Jhash: rebases to jhash
- Interactive: changes to powersave_bias
- Source: Changes from v30b drop
r15 - Week 2.1
- CPU: Cleaned commits and add 1404MHz OC
- zRAM: Increase the output user size
- Source: Revert toolchain to 4.4.3
- Source: Revert push
- Source: Changes from v30b drop
- RAM: Enable RAMHack
- HW: LTO Download Mode
- Fsync: enable by default
- Governor: Push all governors from ARM.
- Scheduler: Pull SIO 2013- RAM: Enable 96MB zRAM
- CPU: Enable undervolt to CPU Master
- Support: Star. Hub add support for AnTuTu CPU Master
- Bootloader: Fix CMDLINE for boot up
- Bootloader: Initials onto ICS Bootloader
r33 - Week 3 (Next build)
- CPU: Allow UC to 200MHz
- CPU: Bump up the voltages to allow save Undervolting in CPU Master
- Source: Fetch and merge arcee fixes from cyanogenmod lge_kernel_star
- Source: prepare for SU660
- Source: prepare for p999
- Scheduler: Add VR & ROW Schedulers updated to Jan 2013
- Governor: Import OndemandX from p970 drop
- Governor: Import InteractiveX frlm p970 drop
- Governor: Added SmartASS
- Governor: Fix SmartASS for p990
- Governor: Added SmartASSv2
- Governor: Fix SmartASS for p990
- Governor: Added Lionheart
- Governor: Reduce lag on Interactive by bumping down any powersave bias - p970 drop
- BL: Reduce LED light brightness to 0.5mA
- Display: Reduce minimal brightness from 15 to 1
- Display: Increase Maximum brightness from 255 to 300
- WLAN: Undervolt the WLAN - p970 drop
* Weeks are calculated from this year onwards
Click to expand...
Click to collapse
Credits:
CyanogenMod Team - For giving a base for AOSP and merge fixes
LG Electronics -
wkpark - RAMHack
AKKP Team(pidozz) - OC tree improvements
Carburano - flashable zip for v30x based kernels
Qualcomm - New Schedulers & Governors
New Bootloader Section ₪
DOWNLOADS FOR STOCK V30
=========================
Compatible with:
Stock v30B
Django Manouche (Currently Unstable)(Under fixing with Carburano)
Stock v30A
=========================
EXPERIMENTAL STATUS
Preview 1 - AKKP-P1.zip - 5.24 MB
r15 - AKKP-r15.zip - 5.21 MB
=========================
DOWNLOADS FOR CM10
=========================
Compatible with:
Pengus' CM10
=========================
None
=========================
DOWNLOADS FOR CM10.1
=========================
Compatible with:
MIUI v4 By rugglez
=========================
None
Old bootloadarrr
cyanogenmod 10
- coming!
Frequently ASKED QUESTIONS:
- Hey man, differences between AKKP and stock kernels?
+ Goodied with more tweaks and features, we are definitely the thing you need.
- Is the changelog for all kinds of builds?
+ yes. they all have the same features of the same release version
need one more for build tut
Sent from my LG-P990 using Tapatalk 2
Tks.Testing on my stock v28g (in using kob w/o problems here).
Sent from my LG-P990 using xda app-developers app
louiscypherbr said:
Tks.Testing on my stock v28g (in using kob w/o problems here).
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Report whether it works or not here
Sent from my LG-P990 using Tapatalk 2
hmmm great to c some good dev building kernel for stock cm10 n cm10.1.....as soon as u release cm10 kernel will try it out....Thanks for ur work....
rmrajm1 said:
hmmm great to c some good dev building kernel for stock cm10 n cm10.1.....as soon as u release cm10 kernel will try it out....Thanks for ur work....
Click to expand...
Click to collapse
glad you like it
i will focus on finding an artist first. I desparately need one for logo and boot animation
Not booting. Did you test it before release?
Sent from my LG-P990 using xda app-developers app
louiscypherbr said:
Not booting. Did you test it before release?
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
boots here but i just bricked my phone. I flashed an old bootloader kernel.
nicholaschw said:
New Bootloader Section ₪
=========================
Compatible with:
CM10.1 by rugglez
=========================
Click to expand...
Click to collapse
I haven't made any CM10.1 ROM , just MIUIv4 for the 2 bootloaders, P.A.C.-man for the new one, and a single paranoid android(new year's gift) for the new one. All CM10 based, so you could modify the previous section which has pengus77's CM10 and add it there.
Btw, nice to see that you can finally test your kernel on your phone to detect issues, will make development faster and more efficient. Hope to see you on the CM side soon.
ok. i went to downgrade to v28A. flashed the kernel, pop goes the phone. BRICKED. Damn. can anyone provide a logcat??
Sent from my LG-P990 using Tapatalk 2
I could if the kernel boots, but it's not.
Sent from my LG-P990 using xda app-developers app
louiscypherbr said:
I could if the kernel boots, but it's not.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Ok. i got the logs. its segmentation fault. Finished rebase. Await for the new release. im using it right now
Sent from my LG-P990 using Tapatalk 2
Sat Jan 12 - 4:14PM - jenkins-akkp
===========================
r15 - Week 2.1
- CPU: Cleaned commits
- zRAM: Increase the output user size
- Source: Revert toolchain to 4.4.3
- Source: Revert push
- Source: Changes from v30b drop
- RAM: Enable RAMHack
- HW: LTO Download Mode
- Fsync: enable by default
- Governor: Push all governors from ARM.
- Scheduler: Pull SIO 2013- RAM: Enable 96MB zRAM
- CPU: Enable undervolt to CPU Master
- Support: Star. Hub add support for AnTuTu CPU Master
- Bootloader: Fix CMDLINE for boot up
- Bootloader: Initials onto ICS Bootloader
Realised issue is in the Bootloader.
I tested it and it booted. I didnt have any network. the module got messed up. I realised again. WIPE CACHE AND DALVIK. NEVER SKIP IT OR YOU SHALL END UP LIKE ME.
What are the difference to KoB Kernel?
Have you only OC Kernel or an NoOC Kernel too?
How are the Battery drain with your Kernel?
Any Bugs known?
Thank you
sgspluss said:
What are the difference to KoB Kernel?
Have you only OC Kernel or an NoOC Kernel too?
How are the Battery drain with your Kernel?
Any Bugs known?
Thank you
Click to expand...
Click to collapse
theres only OC. and, The battery drain is slightly lower than kob. because the baseband IS tweaked. no bugs. maybe just that sd read takes at the most 3mins.
Sent from my LG-P990 using Tapatalk 2
Can you make an NoOC version of this Kernel too?
Cause i will test it but only NoOC versions cause i dont need OC...
sgspluss said:
Can you make an NoOC version of this Kernel too?
Cause i will test it but only NoOC versions cause i dont need OC...
Click to expand...
Click to collapse
you can set it to 1GHz. the set rate will disable the oced rates
Sent from my LG-P990 using Tapatalk 2
Hello. I am new to developing roms and this is the first one i upload. Please don't expect updates often.
Difference between normal CM 10.1 and this one:
- SmartassV2 governor
- gaming governor
- overclocking to 1700mhz (1,7 ghz)
- deadline I/O schedular
- row I/O schedular
- cfq I/O schedular
- sio I/O schedular
- PureXAudio
- and maybe more...
It runs really smooth with the smartassv2 governor on at 1,7ghz and with I/O schedular set to Deadline.
Didn't test the battery life jet.
only 3G doesn't work.
It also looks the same.
Rom download:
MOD EDIT
Gapps:
http://d-h.st/uES
if you want inverted gapps:
http://www.bam-android.com/forum/showthread.php?3007-Inverted-Gapps-4-2-2 (thanks to spider over at www.bam-android.com)
kernel (thanks to MoKee developers
Rom (thanks to cyanogenmod team)
gapps (thanks to cyanogenmod team)
Changelog:
v2.0
added purexaudio
v1.0
newest cyanogenmod base
newest MoKee kernel
old version:
MOD EDIT
sources:
MOD EDIT
Why not package just the kernel so people can update their CyanogenMod independently?
Sent from my LG-P880 using Tapatalk 4 Beta
arararagi said:
Why not package just the kernel so people can update their CyanogenMod independently?
Sent from my LG-P880 using Tapatalk 4 Beta
Click to expand...
Click to collapse
+1
Sent from my LG-P880 using xda app-developers app
arararagi said:
Why not package just the kernel so people can update their CyanogenMod independently?
Sent from my LG-P880 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I couldn't find the kernel itself. And I am planning to implent mods in this.
And i will try to update it every week with new mods.
Sent from my LG-P880 using xda app-developers app
@judodave
It is soooo smooth.It is soooo fast.It's really great!
Mobile data traffic is not working for me.APNs is correctly identified.DreiA,drei.at.
I once again cleared and flashed everything.4G,HSPA does not work.
Maybe you have a solution for me?
many thanks
judodave said:
I couldn't find the kernel itself. And I am planning to implent mods in this.
And i will try to update it every week with new mods.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
take a look at your output directory
Code:
out/target/product/p880/kernel
Code:
out/target/product/p880/obj/KERNEL_OBJ/arch/arm/boot/zImage
umm, don't get me wrong, but you need to upload your sources
laufersteppenwolf said:
umm, don't get me wrong, but you need to upload your sources
Click to expand...
Click to collapse
Ooh sorry. I will edit it as soon as i know the sources. Again sorry.
Sent from my LG-P880 using xda app-developers app
gordon0001 said:
take a look at your output directory
Code:
out/target/product/p880/kernel
Code:
out/target/product/p880/obj/KERNEL_OBJ/arch/arm/boot/zImage
Click to expand...
Click to collapse
Thanks but I can't find that folder.
Sent from my LG-P880 using xda app-developers app
Please provide source code as soon as possible or this thread will be closed.
eagleeyetom said:
Please provide source code as soon as possible or this thread will be closed.
Click to expand...
Click to collapse
This thread can be closed.
Thanks :good:
How to get the MoKee kernel itself? On first site the source was published. But how to get only the kernel in Image.zip?
judodave said:
Hello. I am new to developing roms and this is the first one i upload. Please don't expect updates often.
Difference between normal CM 10.1 and this one:
- SmartassV2 governor
- gaming governor
- overclocking to 1700mhz (1,7 ghz)
- deadline I/O schedular
- row I/O schedular
- cfq I/O schedular
- sio I/O schedular
- PureXAudio
- and maybe more...
It runs really smooth with the smartassv2 governor on at 1,7ghz and with I/O schedular set to Deadline.
Didn't test the battery life jet.
only 3G doesn't work.
It also looks the same.
Rom download:
http://d-h.st/Vz0
Gapps:
http://d-h.st/uES
if you want inverted gapps:
http://www.bam-android.com/forum/showthread.php?3007-Inverted-Gapps-4-2-2 (thanks to spider over at www.bam-android.com)
kernel (thanks to MoKee developers
Rom (thanks to cyanogenmod team)
gapps (thanks to cyanogenmod team)
Changelog:
v2.0
added purexaudio
v1.0
newest cyanogenmod base
newest MoKee kernel
old version:
v1.0: http://d-h.st/fdm
sources:
MoKee: http://pan.baidu.com/share/link?shareid=3801863919&uk=1160557519 (password: bmq4)
CM10.1: http://get.cm/?device=p880
Click to expand...
Click to collapse
i tried to install but stuck with boot logo its spinning thats all so any idea whats reason
raz0r09 said:
How to get the MoKee kernel itself? On first site the source was published. But how to get only the kernel in Image.zip?
Click to expand...
Click to collapse
I make it so.
Download the ROM.
Extract kernel form the ROM ROM is in Zip Format.
Flash the kernel with the terminal way.
I have no 3g and this is ****.
I download the Eternity Kernel.
I Deleted the kernel In the Zip and replace with the Mokee (change name correct) and replace the module with from iodak cm kernel.
Compresse to zip again and flash on both flash (Zip&Terminal) have no mobile data I'm back on iodak v6.
LG 4X HD - Better than a Smartphone
Thread closed as non compliant with GPL license. If you can't provide the kernel source, simply don't release the kernel. We both don't want trouble, do we?
[KERNEL][CM7][CWM][BCM21553][TassVe] Mini Kernel. Best stock kernel for CM! [23.06.2014]
Hi guys, I yet just learning to do kernel..
Mini Kernel v1.1
Stable, economical(battery), but BT not work.
Downloads
Features:
Ramdisk modified by me
zImage from Cyanus 1.9
Ramdisk features:
No bug with "visual" mount /system in CWM(like CM Specific Basic Kernel or angpysha_kernel)
Dualboot support
CWM by BroadcomCM
Cyanus 1.9 features:
init.d
4 freq: 104,312,624,832
17 govs
6 i/o scheduler
CIFS
tweaks
zram,swap
droidwall support
Bugs: BT not work.
Mini Kernel v2.0
Unstable, uneconomical(battery), but Wi-Fi, BT, Camera work and LewaOS fully working.
Downloads
Features:
Ramdisk from CM Specific Basic Kernel
zImage from GearKernel v0.4
GearKernel v0.4 features:
Linux Kernel 2.6.35.14
Tiny RCU
LZO Compression for ZRAM built-in
I/O Schedulers: SIO, NOOP, CFQ, BFQ, DEADLINE, VR
CPU Governors: Lagfree, minmax, brazilianwax, smoothass, SavagedZen, interactiveX, Scary, smartassV2, smartass, interactive, conservative, ondemand, powersave, bcm21553 (default), performance
BCM Tweak built-in
RWSEM Updated and tweaked
Bugs: "visual" mount /system in CWM
Mini Kernel v3.0 <- Best stock kernel for CM!
Stock kernel for CM(like CM Specific Basic Kernel), stable, economical(battery), no need for latter stock!
Downloads
Features:
Ramdisk modified by me
zImage compiled by me
Ramdisk features:
No bug with "visual" mount /system in CWM(like CM Specific Basic Kernel or angpysha_kernel)
Dualboot support
CWM by BroadcomCM
This kernel is based on Samsung Stock Sources
XDA:DevDB Information
[KERNEL][CM7][CWM][BCM21553][TassVe] Mini Kernel. Best stock kernel for CM! [23.06.2014], Kernel for the Samsung Galaxy Mini
Contributors
Gisha 7
Kernel Special Features:
Version Information
Status: Testing
Created 2014-03-21
Last Updated 2014-06-23
Reserv..
nice work
Mini Kernel v2.0 use EXT2 or EXT4?
linckandrea said:
nice work
Mini Kernel v2.0 use EXT2 or EXT4?
Click to expand...
Click to collapse
EXT4..
what the deffrense between the original one's and the new one's
thebiggboss180 said:
what the deffrense between the original one's and the new one's
Click to expand...
Click to collapse
New - ramdisk, it contains: phone startup script (file system, settings for work Wi-Fi, BT, Camera on CM 7), recovery..
v1.0:
I wanted fix BT on Cyanus 1.9 replacement of ramdisk, but problem in zImage (kissingmylove done something wrong in source, I tried today compile zImage from kissingmylove source, but I got an error when compiling, something connected with modules..).
In general has turned Cyanus 1.9 for CM 7 RC4 by Biel and based on their and with new CWM.
v2.0
Just GearKernel v0.4 for CM 7 RC4 by Biel and based on their and with new CWM (File system - ext4).
Incidentally kernel became stable and disappeared a couple of bugs..
In theory (!) v1.0 - economical (battery) and not work BT. v2.0 - uneconomical, but all works..
I himself can compile zImage, but I do not know how to add frequency, governar and etc..
I advise you to esteem in Google about Ramdisk and zImage (In Broadcom devices recovery(cwm) is located in Ramdisk..).
Hi all! Next month, I'll buy a new phone(may Sony Xperia SP, as at Biel) ), so keep updated:
Mini Kernel v1.0 updated to Mini Kernel v1.1, changelog:
1. Fix bug with "visual" mount /system in CWM(like CM Specific Basic Kernel or angpysha_kernel)
2. Added dualboot support
Mini Kernel v2.0 updated to Mini Kernel v2.1, but no work, deleted(
I compiled kernel from GT-S5570I_GB_Opensource.zip - no need for latter stock! Also in Mini Kernel v3.0 I use Ramdisk modified by me:
1. Fix bug with "visual" mount /system in CWM(like CM Specific Basic Kernel or angpysha_kernel)
2. Added dualboot support
Mini Kernel v3.0 - Best stock kernel for CM without bugs, better than CM Specific Basic Kernel!
S5570IXXKL2 - old Russia stock
Waiting for it
Inviato dal mio GT-S5570i con Tapatalk 2
Really !! better than bieltv.3'sLoL
myaservip said:
Really !! better than bieltv.3'sLoL
Click to expand...
Click to collapse
That is CLEARLY not sarcasm.
PS:: Adding modem"baseband" will cause creatical bugs for some people:thumbup: Keep UP the Great|lol| Work
myaservip said:
PS:: Adding modem"baseband" will cause creatical bugs for some people:thumbup: Keep UP the Great|lol| Work
Click to expand...
Click to collapse
It works perfect on my phone -.-
Inviato dal mio GT-S5570i con Tapatalk 2
good performance good battry life
yeah battery life is so good :good:
Rojak Kernel for Xperia Z
WARNING!!
This kernel allows you to set the CPU frequency beyond the stock rated frequencies. Do this at your own risk! I will not be responsible for any damage to your device if you do so!
INTRODUCTION
This is a kernel for Xperia Z running Omnirom. It may or may not work on other roms.
Any feedback is welcome.
FEATURES
Linux 3.4.86
Gamma control
Sweep 2 Wake
Doubletap 2 wake
USB Fastcharge
CPU overclocking up to 1836 MHz
Intelli-Plug
Additional CPU governors - intellidemand, intelliactive, preservative
Additional I/O scheduler - bfq, sio, fiops
GPU overclocked to 450 MHz
Additional GPU governor - simple
Voltage control
Sound control
Intellithermal (NEW)
REQUIREMENT
This kernel work with Omni 4.4 for Xperia Z. It's tested on Omni 4.4.4 nightly build 20141031. Please update your rom if you're using an older version.
INSTRUCTION
Make sure you're using Omnirom build 20140324 or later. Download here. Flash the zip in CWM or TWRP recovery.
NOTES
To change CPU governor or min/max cpu frequency (i.e. over/underclocking), first disable MPDecision and enable Intelliplug using an app like Fauxclock or Trickster Mod. To over/underclock, use Omnirom's performance setting. Third-party apps might not work.
To use Gamma control, see this post: http://forum.xda-developers.com/showpost.php?p=45436325&postcount=3. Credits to alnikki25k.
.
SOURCE CODE
https://github.com/aidfarh/android_kernel_sony_apq8064/tree/rojak_kk
CREDITS
This kernel is based on Omnirom kernel for yuga. Various codes were copied from kernels by DoomLord, alnikki25k, maxwen and faux123. Thanks to all other kernel developers who's contributed codes to various linux and android kernels.
XDA:DevDB Information
Rojak Kernel for Yuga, Kernel for the Sony Xperia Z
Contributors
aidfarh
Kernel Special Features:
Version Information
Status: Stable
Created 2014-03-26
Last Updated 2014-11-05
Reserved
CHANGELOG
v1 (2014-03-25)
Gamma control
Sweep 2 Wake
Doubletap 2 wake
USB Fastcharge
CPU overclocking up to 1836 MHz
Intelli-Plug
Additional CPU governors - intellidemand, intelliactive
Additional I/O scheduler - bfq
v2 (2014-03-27)
Added sio and fiops I/O schedulers
Overclock GPU to 450 MHz
Include wlan firmware in kernel zip
v3 (2014-04-12)
Added voltage control
Added preservative CPU governor
Updated GPU drivers (copied from xzaosp kernel)
Added simple GPU governor
Kernel updated to Linux 3.4.86
Compiled using Linaro 4.7-2014.01 toolchain
Various optimisations (mostly cherry-picked from xzaosp kernel by alnikki25k) (see github for details)
Added sound control (doesn't seem to work)
v4 (2014-05-05)
Added sound control v3.2
Compiled using Linaro 4.8-2014.03 toolchain
Enabled some linaro optimisations
v5 (2014-11-05)
Synced with updated omnirom kernel source code
Compiled using Christopher83's 4.9.2-2014.09 toolchain
Added intellithermal (disabled by default; enable using Trickster Mod, Fauxclock or similar app)
Updated intelliplug to ver 3.8
Modified preservative governor for extra smoothness
Also see the notes in this post: http://forum.xda-developers.com/showpost.php?p=56506979&postcount=134
Congrats on your kernel, mate! Looks good, will try this
Will this work on ROM based on Omnirom like for example Dirty Unicorn...
Sent from my C6603 using Tapatalk
Vishalkris said:
Will this work on ROM based on Omnirom like for example Dirty Unicorn...
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
I honestly don't know. Please try and provide feedback.
K will do it
Sent from my C6603 using Tapatalk
Im wondering the same thing.Tell us when you test please.
FakeSmile said:
Im wondering the same thing.Tell us when you test please.
Click to expand...
Click to collapse
ok first im updating my rom DU...new test build then once booted in to the system will flash the kernel and update how things go...:angel:
---------- Post added at 02:40 AM ---------- Previous post was at 02:17 AM ----------
flashed the kernel on Dirty Unicorn Build 25...every things good...no graphic glitches like Meow Kernel...
Bugs:
1) WiFi doesn't work. @aidfarh it would be good if you provide a Wifi module zip file till u find a way to resolve the issue.
2) A little digestible lag... while scrolling list view in settings and i also while scrolling side wise in the app drawer...
Suggestions.
1) More CPU governors. i know will happen today or tomorrow
2) Release Wifi Modules till the kernel is compatible with omni based roms
3) GPU overclocking can be peaked a little more higher (meow kernel had achieved it 450Mhz u can look in to it)
4) Never leave devloping this kernel as its the first for Omni and we got limited choice when it comes to kernel based on aosp and cm
But still for this stage the kernel is "remarkably good". lots of high expectations from all the omni rom and omni rom based rom users
Keep up the good work
I can confirm that it perfectly working with aslyum rom latest..nothing find unusual.. Post it soon regarding the battery life..
Edit: wifi reception was lower than stock omini..
Sent from my C6603 using Tapatalk
Vishalkris said:
ok first im updating my rom DU...new test build then once booted in to the system will flash the kernel and update how things go...:angel:
---------- Post added at 02:40 AM ---------- Previous post was at 02:17 AM ----------
flashed the kernel on Dirty Unicorn Build 25...every things good...no graphic glitches like Meow Kernel...
Bugs:
1) WiFi doesn't work. @aidfarh it would be good if you provide a Wifi module zip file till u find a way to resolve the issue.
2) A little digestible lag... while scrolling list view in settings and i also while scrolling side wise in the app drawer...
Suggestions.
1) More CPU governors. i know will happen today or tomorrow
2) Release Wifi Modules till the kernel is compatible with omni based roms
3) GPU overclocking can be peaked a little more higher (meow kernel had achieved it 450Mhz u can look in to it)
4) Never leave devloping this kernel as its the first for Omni and we got limited choice when it comes to kernel based on aosp and cm
But still for this stage the kernel is "remarkably good". lots of high expectations from all the omni rom and omni rom based rom users
Keep up the good work
Click to expand...
Click to collapse
I expected that wifi might not work with other roms or older omnirom builds. The latest omnirom kernel has updated wlan drivers but it also need updated wlan firmware to work. Try flashing the attached zip that contains the updated wlan firmware and see if it works.
Lags are hard to quantify and hard to fix. Try other CPU governors or I/O schedulers and see if things improve.
What CPU governor to do you want?
GPU overclocking is planned, but I can't promise anything.
FINALLY!!!! When i sow the thread title i couldn't believe my eyes
Long time we are waiting for a kernel that support Roms that are not based on stock, specially when u bring to us Gamma control and fast charge pleasure.
So i want to say thank u aidfarh from all of my heart, and yes plz don't stop this, keep the development up as much as u can cuz we need u
(now i feel like i am a little girl who asking too much LOL).
I am about to flash PA today, will flash it and I'll try your kernel to see how it goes, and if it doesn't then i'll back to my favorite ROM Dirty Unicorns then i'll try again.
Thank U :victory:
works good in DU
Sent from my C6603 using Tapatalk
off-topic: hahaha ROJAK kernel. typical orang malaysia in naming mixed things!
back to topic, could you include FIOPS IO scheduler by faux123? According to faux, intellidemand/active works the best when combine with FIOPS scheduler.
kingrion88 said:
off-topic: hahaha ROJAK kernel. typical orang malaysia in naming mixed things!
back to topic, could you include FIOPS IO scheduler by faux123? According to faux, intellidemand/active works the best when combine with FIOPS scheduler.
Click to expand...
Click to collapse
Thanks for your suggestion. I'll take it under consideration.
Will this kernel work on Paranoid Android??
acutraaq said:
Will this kernel work on Paranoid Android??
Click to expand...
Click to collapse
Try the pacman kernel will work
Sent from my C6603 using Tapatalk
OK.. It's working on DU 15/03/2014 build, had no WIFI but after flashing wlan firmware the WiFi get fixed.
I don't have any random errors, FC's, Reboots, lags... everything is perfect.
One thing I've noticed is Gamma control, the sittings doesn't stick after reboot and i don't now if that is the same for fast charge or for the
o/u clocking.
Will keep testing...
Its working flawless on infected's omni build 0324. Hope u keep updating this Bad ass. No issues at all so far. Cant wait for the sound control! Thank you dude.
Gesendet von meinem C6603 mit Tapatalk
I need to buy the app to use gamma control,right?
FakeSmile said:
I need to buy the app to use gamma control,right?
Click to expand...
Click to collapse
Yes faux clock
Sent from my Xperia Z using Tapatalk