Database Develop

How 2 - ADB, Rooting(reflash), Unrooting, Nandroid, Remove/Install App, roms, kernels

So far, this is going to be a guide for noobs. Please read through this, and ask any questions that you have. This has been compiled from different guides around XDA, and information has been stripped that does not relate to our phones. More will be put up here when I find it, and all credit will be provided. This will be from 'duh' to 'didn't know that'. The idea is to provide a beginning to end explanation: Stock Incredible to Rooted with custom Rom.
Topics so far - ADB, Rooting (reflash), Unrooting, Nandroid, Remove/Install Apps, roms, kernels...
I'M NOT RESPONSIBLE IF YOU BRICK YOUR PHONE DOING ANY OF THIS.... REGARDLESS OF WHY. Yadda, yadda, yadda...
**********At this point, I'm going to ask that you uninstall HTC Sync. Also, please uninstall HTC Driver... (whatever it's called) Nobody likes them (really though, it will mess up a lot of things. You can install them later when all this is done).**********
1) Setting up ADB
ADB stands for Android Development Bridge. It is used by Android developers for programming. For us, it is used to hack into our phones . For our purposes, just know that it is like the cmd (command prompt) that allows us to send commands to our phone. This is extremely useful when we're in the custom recovery
Download the Android SDK from Google: http://developer.android.com/sdk/index.html
Unzip to your desktop
Take the "android-sdk-_**-windows" folder and move it to the root of your hard drive (C:\)
** will change, it is revision of SDK, like "r6"
****The below is not necessary, but is useful sometimes if you just want to run "adb shell" from anywhere without going into the sdk directory****
Right click on My Computer and click properties
Select the Advanced Tab or Advanced System Setting (Vista/Windows 7)
Select Environment Variables...
Press New
For Variable Name type: adb
For Variable Value type: C:\android-sdk-_**-windows\tools
****End of the "This is not necessary thing****
Now, we get USB drivers to work. Some use HTC Sync for drivers, however HTC Sync does not like to play nice with the reflash tool (later on this), so we will use the generic google USB drivers.
1. Run SDK Setup.exe
2. If it gives you any error go to settings and click on "Force http//....."
3. Select usb driver package, let it download and install
4. Some say the below step is not needed, but I did this so I'm posting it
Go to tools folder, and edit "android_winusb.inf" (you can do this by opening it via wordpad). Add the following at the end of the [Google.NTx86] and [Google.NTamd64] blocks:
;HTC Incredible
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C9E
%CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C9E&MI_01
%SingleBootLoaderInterface% = USB_Install, USB\VID_0BB4&PID_0C94
Save the file and exit.
5). Plug your phone into PC, when windows asks to install drivers for new found hardware, point the New Hardware Found wizaed to android_winusb.inf that you just edited.
============================================================
2) Preparing your phone for ADB
Go to Settings on your phone
Select Applications
Select Development
Make sure 'USB Debugging' is checked
============================================================
3) Check if your phone is detected by ADB
Open up Command Prompt (Go to run, type in cmd, press enter)
Type in:
cd C:\**your sdk name**\tools (Press Enter)
adb devices (Enter) You should see your device listed
adb shell (Enter) you should see $ in the next line
**After you obtain root**
su (Enter) you should see # in the next line if you are already rooted
**you may need to allow adb shell to run as root. Look at the phone and see if Superuser.apk is asking for your permission to allow adb root access. Click on "Remeber my selection" and select yes.
Now you are all set to run adb commands as root or as a regular user
**Note: for a list of commands that you can type using adb type "adb" in cmd
All Credit for Topics 1 - 3 go to user XDA member nephron. I mostly copied all of his guide, but updated some information on it to make sense for our phones. Also, removed some stuff I didn't see necessary. Please go to the original thread for the G1: http://forum.xda-developers.com/showthread.php?t=532719&highlight=nandroid+guide for a list of further Credits, and for information I've left out. If you like this thread, please donate to HIM
============================================================
4) Rooting your phone - READ THIS WHOLE SECTION BEFORE GOING TO ANY EXTERNAL LINKS PLEASE. At this point, running the UnrEVOked reflash3 tool will root your phone and install a custom recovery. To try to make it really easy to understand, recovery allows you to access your phone to make PERMANENT changes (something we can't do while booted yet), flash custom roms, and save your sorry little @$$ if you do something that you weren't supposed to
Ok, at this point, I'm going to ASSUME that you don't have HTC SYNC installed (or uninstalled it), and that you have the Google USB drivers installed (i.e. you read at least some of this post). The first thing we're going to do is:
1) Read this: http://forum.xda-developers.com/showpost.php?p=6875912&postcount=1
2) If you read #1, you already went here: http://www.unrevoked.com/rootwiki/doku.php?id=public:windows_hboot_driver_install
and downloaded the MODIFIED (i.e. changed, not the same, DON'T SKIP THIS STEP) driver and installed it
3) If you read #1, you already downloaded the reflash tool executable
4) If you read #1, you've already done #2, and 3, and this is just a worthless step of me explaining how important it is that you did #1
5) Lets do this. #1,2,3 and 4 were "get ready" steps. By now, you installed the modified driver, went to the webpage and downloaded the UnrEVOked3 reflash tool. HTC sync is also uninstalled. Plug in your phone (normally booted) to your pc and select "Charge Only" when asked how to connect to PC, and click on "remember my selection". Click Done.
6) Unplug Phone from PC.
6a) If you have double twist installed, at this time open the task manager on your pc, and kill doubletwist.devicehelpder....
7) Run the "reflash_package" executable that you just downloaded. Notice the path that it lists and click "install". This will unzip "reflash.exe" and a bunch of other stuff that is needed to the directory that you just noted. Go to this directory (usually the same one where the executable you just ran is) and run "reflash.exe"
8) Plug in your phone.
9) When the program is finished, you should see koush's clockworkmod recovery on your phone's screen and reflash will say that it's done. Congrats, you have root and a new recovery.
If something went wrong, and you're not on koush's recovery and reflash says it's done, don't worry, just re-run reflash. You can run it as many times as necessary. It will not hurt anything AT THIS TIME (this may change later)
10) Koush's recover works a little differently:
a) Vol+ and - scroll up / down
b) the Power button work as a "Back" button, and will turn off screen if you're at the root of the menu. If your screen goes blank, don't read, just hit Power again
c) To make a selection, click the optical trackpad
11) Reboot your phone by highlighting the selection and choosing it
For the most part, these instructions were written from memory, but all credit goes to UnrEVOked, Shadowmite, and anyone that they've given credit to in original links.
============================================================
5) Unrooting - I didn't want to re-invent the wheel, so I'm posting an external link:
http://androidforums.com/all-things...ideo-howto-unroot-incredible-downgrading.html
Just follow the instructions. Credit goes to the OP. If this link ever goes to a 404, pm me and I will find another link with instructions and update this. Also, if you don't understand something, just ask in this thread, someone will answer (maybe even me ).
============================================================
6) Whats is a Nandroid Backup?
**Using Koush Recovery:
Power takes you "bacK" in menu's. On root of the menu, it will turn on/off screen. Hit Power again to turn it back on.
Vol+/Vol- lets you scroll up/down through menus
Pushing optical trackpad in makes your selection
Nandroid Backup is a tool allowing your Incredible that has koush ClokworkMod Recovery to create a full system backup and restore it, which, when flashing and testing different roms can be very useful.
A) Creating a Backup using Nandroid
Boot up your phone in recovery (Turn off, then turn on while holding Vol- and Power. Press Vol- once to highlight recovery, hit Power once to go into it)
You will now see your new koush recovery
Scroll down (Vol -) to "nandroid" and select it (press the optical button in)
"Backup" will be highlighted. select it
Let it work, it might take a while for a full system backup
Once its done, your backup is complete and is saved on your sdcard in the "clockworkmod" folder. Normally it's stored in the "nandroid" folder, however our Recovery does things a little differently.
B) Recovering to Your Nandroid Backup
Make sure u made a backup and its in the clockworkmod folder on your sdcard
Boot up your phone in recovery (Explained Above)
Go into "nandroid" in the recovery (also explained above)
Select "restore backup" and select from the backups you have (if you have multiple) that you want to restore; this will do a simple, "restore all" of your latest nandroid backup
:OR:
Select "Advanced Restore", choose from the backups that you have on your SD card, and then what you want to restore. You can individually restore "system", "data", "cache", etc....
In "Advanced Restore", i have not seen a way to restore multiple options (cashe AND system, etc...) Koush, am I missing something?
Let it work
Once its done, restore more options through the Advanced Restore menu, or reboot your phone and your selections will now be restored!
============================================================
7) Remove Apps
**Using Koush Recovery:
Power takes you "bacK" in menu's. On root of the menu, it will turn on/off screen. Hit Power again to turn it back on.
Vol+/Vol- lets you scroll up/down through menus
Pushing optical trackpad in makes your selection
1) Go into Clockworkmod Recovery (With phone turned off, Vol - + Power, then Vol - to select recovery, then hit Power)
2) Select "partitions" from menu, then select "mount sytem" You can also "mount sdcard" if you want to back apps up to sdcard
3) Connect Phone to PC
3a) Open a command prompt and navigate to your sdk\tools directory
3b) Type: adb remount (it shoud return successful)
4) Open Adb Shell on your pc (Type: adb shell)
It should automatically show #, otherwise type "su"
Type:
cd /system/app (enter)
5)Type ls (this will show you all of the stuff in the /system/app directory)
6) To "delete" apps, type the following:
/system/bin/mv Your_APP.apk Your_APP.apk.bak (i.e. CityID.apk CityID.apk.bak). If you want to clear up space on your internal storage for whatever reason, you can replace Your_APP.apk.bak with /sdcard/Your_APP.apk.bak (this will move the app to the root of your SD Card instead of just change it's name)
If you don't get errors, you're done.
*This does not delete apps, but changes their file type so they will not show up as an app, in case you want to get them back at any time later you still have them and don't have to frantically post threads on XDA asking for them.
============================================================
8) Install Apps to /system/app
**Using Koush Recovery:
Power takes you "bacK" in menu's. On root of the menu, it will turn on/off screen. Hit Power again to turn it back on.
Vol+/Vol- lets you scroll up/down through menus
Pushing optical trackpad in makes your selection
1) Place your app you want to install into the root of your sd card (this is easiest)
2) Go into Clockworkmod Recovery (Explained in 7)
3) Mount system and sdcard under partitions (Explained in 7)
4) Connect Phone to PC
4a) adb remount in command prompt (should sow successful) (again, in 7)
5) Open Adb Shell on your PC
6)
IF NOT at #, type "su" to go from $ to #.
Type:
/system/bin/mv /sdcard/Your_App_Name.apk /system/app/Your_App_Name.apk
7) If you don't get errors, you're done. You can unplug phone, and reboot
============================================================
9) Flashing Custom Roms
Download a ROM that you want to try. One of the roms from here are a good starting point: http://inc.sodpit.com/. They are mostly stable might get a few random reboots.
Steps:
1. Download Rom of your choice
1a. Right now, there might be two ROM types, a nandroid backup and an update.zip type file. For right now, I recommend sticking with the update.zip kind. These instructions are meant for it, but I just want you to make sure you know which type it is before you try to flash it.
2. Copy and Paste the downloaded file onto sdcard. Make sure it is not in any directory's of SD card, just on the sdcard (the "root" of it).
3. Verify it's there using Astro or some other File Manager just to be safe.
4. Download and Run Titanium Backup from the Market if you haven't already. (If you don't have it, get it, it's must have for root users.)
a. Select Menu, Batch, Backup user apps. (in Titanium Backup)
b. let it run, this will take some time.
5. When that's done open your command prompt, navigate to your sdk\tools directory, and type "adb reboot recovery" (Not within adb shell, but in command prompt in that directory. I'm not going to explain how to do this because it's already explained above. Also, if you're flashing roms then you're already familiar with it, or maybe you shouldn't be flashing roms ).
6. Do "Wipe data/factory reset" and "wipe cache partition" in Recovery **This WILL WIPE your phone**
7. Select "install zip from sdcard", then select "choose zip from sdcard", then select the name of the zip you want to install.
8. When that's done reboot your phone, once your done setting up all the settings, download titanium backup from the market again, and set that up.
9. In Titanium, Select Menu, Batch, Restore User apps.
After that's done you'll have all your apps that you had before, data included, with a fresh new rom to try out. Hope this helps!!
All credit for these instructions goes to tcbert2010, they were suggested to me, and I liked them. I modified them a BIT, so they make more sense to me and hopefully to you. See post #2 in Original Thread = http://forum.xda-developers.com/showthread.php?p=6953608#post6953608
============================================================
10) Installing custom kernels
I'm only mentioning Hydra's kernels. I'm running the Undervolted, NOT overclocked kernel with wireless N to preserve my battery to get more life out of it
**Taken from website's FAQ**
Q: So how do I install the kernel?
A: First step is to either download the kernel zip file straight to your phone, or download it onto your computer and put it on the sdcard of your phone. Next you turn the phone off hold volume down and power at the same time. When the phone is in HBOOT wait a few seconds for it to initialize then hit volume down once and then power to boot into Clockwork recovery. Once in clockwork recovery you want to select "Install zip from sdcard", then "Choose zip from sdcard". You will now see a listing of files on your sdcard select the kernel zip you downloaded, or if you downloaded strait to your phone go to the Downloads folder and select the kernel zip file. The kernel will now install to the phone and once it's done it will say install complete. Now you can hit the power button once to return to main menu and select "reboot system now" . Your phone will now reboot with the new kernel.
***
Go to: http://hydrakernel.net/ to download the kernels
Please read: http://hydrakernel.net/faq.htm to educate yourself. It's worth it.
Credit to EJHEART for the wonderful kernels! Where are my 2.2 kernels EJ ?
============================================================
Again, if you have suggestions, requests, or whatever please post or PM me.
PM Me if I missed giving someone credit. PLEASE!!!

reserved
reserved for future.

Reserved
reserved for future

Great thread topic... reserved for future use

Updated
Updated with Reflash instructions.

dreamersipaq said:
Help I'm stuck at waiting for system to settle
check these common issues:
- You switched your driver to the one from this post? It's NOT identical to the SDK one.
- You don't have any usb applications that might be taking focus while we are working with the phone right?
- Is the SD card present in the device?
- You did give su permenent access when you allowed it in superuser right?
More to come...
Click to expand...
Click to collapse
Good start, iPaq! I just want to plug Linux AGAIN. I had zero problems using reflash for linux and using Gparted in Ubuntu/Debian/Linux Mint mint means one can do all kinds of things that will become helpful very soon if not already (e.g., manipulate ext and swap partitions on the sdacard!). Aside from linux being Android's native file system, using a Linux distro just makes 110% good sense if you plan to do any developing for the DI/Android. Why poeple struggle so much with Windows when Linux is free is beyond me
2 cents deposited!

Additional items to add
1) After I have rooted and reflashed - How do I flash new ROMs
2) After I have rooted and reflashed - Is there an easier way to get back in and get rid of CityID, etc?
3) How do I update to a later version of ClockworkMod

Great topic
Sent from my ADR6300 using XDA App

...
jdmba said:
1) After I have rooted and reflashed - How do I flash new ROMs
2) After I have rooted and reflashed - Is there an easier way to get back in and get rid of CityID, etc?
3) How do I update to a later version of ClockworkMod
Click to expand...
Click to collapse
1) - Will update soon
2) - I BELIEVE that this works:
1) Go into Clockworkmod Recovery
2) Mount Internal Storage under partitions
3) Connect Phone to PC
4) Open Adb Shell on your pc
Type:
su (will change to #)
cd /system/app
mv CityID.apk CityID.apk.bak
you're done.
Not in front of my phone at this sec, but if mv does not work, try
busybox mv CityID.apk CityID.apk.bak or
/system/bin/mv CityID.apk CityID.apk.bak
*This does not delete it, but changes the file type so it will not show up as an add, in case you want to get it back at any time later.
If I'm wrong please correct me.
3) The easiest way to update recovery at this time is through Koush's Rom Manager. However, at this time I've read somewhere that it's not persistent. Let's give this a few days.

Updated
First Post Updated.

here is my problem, apparently when I got root I didn't push superuser.apk as a system app correctly.
SO, I have root in the OS after each boot, once I install superuser.apk.
Problem is, I can't get back in recovery to fix this. I have gotten into recovery with ADB again (maybe twice in the 2000 times I have tried again), but when I get to the step where you do the update and push the zip file at the same time, it never works now. So I am unable to push the apk as a system file.
So, the unrevoked recovery flash fails because it doesn't have su rights when it gets to the os on reboot.
Anyone want to help me out?

qwho said:
here is my problem, apparently when I got root I didn't push superuser.apk as a system app correctly.
SO, I have root in the OS after each boot, once I install superuser.apk.
Problem is, I can't get back in recovery to fix this. I have gotten into recovery with ADB again (maybe twice in the 2000 times I have tried again), but when I get to the step where you do the update and push the zip file at the same time, it never works now. So I am unable to push the apk as a system file.
So, the unrevoked recovery flash fails because it doesn't have su rights when it gets to the os on reboot.
Anyone want to help me out?
Click to expand...
Click to collapse
Take this opportunity to flash up to HBOOT 79, wipe, and re-root. Start fresh. Re-reflash w/unrevoked2. Alles in Ordnung! At least, that solved all of my problems. Start with the big headache to avoid later headaches. Once you have a nandroid of a "proper" root, you'll never have to do the annoying initial root again.

So you can get HBOOT 79 how? by flashing the latest HTC rom RUU?

qwho said:
So you can get HBOOT 79 how? by flashing the latest HTC rom RUU?
Click to expand...
Click to collapse
Exactly. Doing will wipe out all userdata, everything not stored online, on your card, or on internal disk. It's really the best way to go, to start fresh and remove all the little variable piecemeal rooting has placed in your path to date.

can you point me to the RUU you would use? I did some searching, here and at htc.com, and I couldn't find an RUU anywhere.

qwho said:
can you point me to the RUU you would use? I did some searching, here and at htc.com, and I couldn't find an RUU anywhere.
Click to expand...
Click to collapse
Just down this, run it in Windoze, and before it tries to flash (you don't need your DI connected!), go into your AppData/temp directory, find the ~142mb rom.zip file, rename it to PB31IMG.zip, put it on /sdcard root directory, boot into bootloader, let the card/file get picked up while holding down-volume, ok the flash, no need to ok the reboot, then boot into to recovery and proceed with adb shell/rooting process one

I've been having some trouble with the nandroid step, and creating a backup. I've done everything listed prior to that with success, but when I load into recovery I don't see the option to create a nandroid backup. I have also dl'ed RomManager and have tried to create backups through that.
I also dl'ed the unrevoked reflash and tried running that, but that also fails. I'm not really sure what I'm doing wrong, so any help wold be appreciated!

sanchagrins said:
I've been having some trouble with the nandroid step, and creating a backup. I've done everything listed prior to that with success, but when I load into recovery I don't see the option to create a nandroid backup. I have also dl'ed RomManager and have tried to create backups through that.
I also dl'ed the unrevoked reflash and tried running that, but that also fails. I'm not really sure what I'm doing wrong, so any help wold be appreciated!
Click to expand...
Click to collapse
Not sure what you mean. Go into Hboot, and select recovery. When Koush's recovery loads, use Vol- to highlight "nandroid". Click the optical button in, and you'll enter another menu. Select the first option, which should be highlighted by default, which should be "Create Backup" or "Backup Device" or something like that.
Let me know if that works.

When I go into recovery the only options I get are:
Reboot System now
Apply sdcard: update.zip
Wipe data/factory reset
Wipe Cache partition
----------------------------------
E:Can't open /cache/recovery/command
Click to expand...
Click to collapse
I'm not seeing anything about nandroid backup. I'm assuming I'm either not doing something correctly (I'm currently not booting into recovery while running reflash.exe) or somehow the clockworkmod isn't correctly installed.
Any ideas? Or what other information could I give you to help better answer my question?

sanchagrins said:
When I go into recovery the only options I get are:
I'm not seeing anything about nandroid backup. I'm assuming I'm either not doing something correctly (I'm currently not booting into recovery while running reflash.exe) or somehow the clockworkmod isn't correctly installed.
Any ideas? Or what other information could I give you to help better answer my question?
Click to expand...
Click to collapse
You can't install anything to recovery that will stick until you get root via procedure 1, then reflash with unrevoked 2. Sounds to me like you've gotten ahead of yourself

Complete Installation Guide for JB or ICS on a Nexus One (Updated 12/29/12)

I initially looked for a complete update guide on here and eventually found all the information I needed, but it was in multiple places and sometimes hard to find. After getting everything installed on my N1 I thought I would write a guide for other noobs like me that want to try out ICS or JB but would like a step-by-step guide. I hope that it is helpful. SpazeDog ROMs (both ICS and JB) are working wonderfully on my N1 - its a very nice update from CM7 with only minor issues so far.
Note: this was initially written specifically for SpazeDog roms, but as they have not been updated in a while I have provided links to other popular roms as well. If you would like to try a different ICS or JB rom this guide should work, just substitute with the appropriate rom and depending on the one you choose, you may also need to install Google apps.
If you looking at this guide and don't know the basics yet, check out the Newbie Friendly thread first.
Links to popular roms that will work using this guide:
Evervolv JB 4.2
Evervolv JB 4.1
CM 10, JB 4.1.2 by vijendrahs
CM 10, JB 4.2.1 by vijendrahs
Spazedog ICS/JB
Disclaimer: This guide involves making changes to your phone that potentially could brick your phone leaving it unusable. I am not liable for any changes you make or problems you may have with your phone. You should at least be familiar with entering commands using command prompt. This procedure will erase ALL the data on your phone. Make sure you have a backup of everything. A nandroid backup is highly recommended. Proceed at your own risk.
Before we get started make sure you have the following: a rooted Nexus One, a USB cable to attach your phone to a computer, and the Android SDK. If you are just now installing the Android SDK, open the SDK manager and make sure to install the "Tools" and in "Extras" the "Google USB Driver" are checked off and download them. Alternatively, you just download ADB and Fastboot (search this forum or google). If you have a Mac see this thread to get started with ADB and Fastboot.
If you Nexus One is NOT already rooted, then follow this guide from Cyanogenmod to root your phone. If you plan to use the adb commands below (they are optional) make sure you have usb debugging enabled: go to "Settings" → "Applications" → "Development" → enable "USB debugging."
Step 1 - Download everything you will need:
4EXTRecovery Updater - the first link will download the .apk to your computer or phone.
BlackRose - go down to bottom of the first post to "Attached Files" and download the latest BlackRose zip file. If you don't want to do it yourself, check out this thread to flash a pre-made partition scheme. Often the developers (Evervolv) will also have a partition schemes that you can flash via Fastboot from your PC as well.
Your rom of choice - go to the downloads section and choose which rom you would like to try. Download the zip installation file.
Since you will be decreasing the size of your partition that apps can be stored on consider something like Mounts2SD or AD2SDX to move apps to your SD card.
Step 2 - Install and use 4EXTRecovery Updater on your phone:
The easiest thing to do is go to the 4ext link above, download and install it, directly from your nexus one. You can also install it by copying the APK file to your SD card, then using a file manager to find it and install it or you can use command prompt by opening command prompt, cd to the location of the Android SDK tools, and then type in the following command (replacing "path" with the path to where the APK is located on your computer):
Code:
adb install /path/4EXTRecoveryUpdater.apk
After you have installed 4ext open the 4EXT Recovery Updater. Tap "Settings" → "Allow" superuser request → "Yes" to connect to 4ext to get new data. Now select "Online install/upgrade" → "Yes" assuming it detects your nexus one correctly → select and install the latest 4ext recovery (at the top of the list).
After 4ext has installed, it will have placed a recovery image on your SD card - find it (its called recover.img) and it should be located in SD/Download/4EXT_Recovery_Touch/ folder. Copy this to your computer in case something goes wrong later and you need to re-flash the recovery image!
After installation of the 4ext recovery turn off your phone and boot into recovery by turning off your phone, turning it on again while holding the trackball down. This will boot into the bootloader, then press the power button once, use Volume Down to select "recovery" and press the trackball to select. Alternatively you can use the command prompt:
Code:
adb reboot recovery
Your phone should now boot into the 4ext recovery menu. Before moving on make sure you have any important stuff backed up because you are about to erase your entire SD card! Select "tools" →“partition sd card” → “remove all partitions and start from scratch.” Then for the 1st partition select “1024″ for a 1GB partition (this will be where ICS will be able to put your applications & data). Select "skip" for the 2nd partition and for the swap partition. Finally select the system “ext4″.
Step 3 - Copy the Evervolv, SpazeDog, or whatever zip installation file you have chosen to your phone's SD card
Download the ICS or JB zip file above and copy it to the root of your newly formatted SD card.
Step 4 - Installing and using BlackRose to resize the system partition:
Download the BlackRose application and install it on your computer. (Alternatively people have made flash-able partition schemes that you can just flash from your PC - usually links and instructions are provided in the installation rom's thread, Evervolv's here. If you do have access to a computer you can check out this thread).
Make sure your nexus one is attached via USB to your computer.
Open the BlackRose application - it will install and reboot your phone. Then follow along as shown in this video to resize your partitions for a JB ROM.
If you plan to install the ICS rom then use the video above as a guide but use the numbers (sizes) for the different partitions as indicated below.
After BlackRose has installed you will need to restart the application. After it has started up and recognized your device select "apply stock/custom blackrose" by typing in 1 and enter.
Then select "custom blackrose" by typing in 2.
Then type "resize" when prompted.
Now you will need to change the sizes of the system partition to 220 for ICS or 260 for JB.
Change the cache size to 8.
Finally name the new system partition, either "ICS" or "JB" depending on what you plan to install.
Note: some people have reported having problems getting into recovery at this point (if not move on to step 5). If that happens, luckily for you, 4ext put a recovery image in the downloads folder of your SD card and if you did what I said in step 2 you saved it. Try reflashing that recovery image using fastboot (remember the one that was in SD/Download/4EXT_Recovery_Touch/ and was named "recovery.img"). Put your phone into the bootloader by turning off your phone, turning it on again while holding the trackball down. To reflash the recovery open command prompt and cd to the location of the Android SDK tools. Then type in the following command (replacing "path" with the path to where the recovery image is located on your computer):
Code:
fastboot flash recovery /path/recovery.img
If that does not solve your problems (inability to get into recovery) then I would recommend going back to the cyanogenmod wiki and installing Amon_Ra's recovery. Then you can use it to flash your installation zip.
Step 5 - Install JB or ICS:
Now turn your phone off and boot into recovery as you did in step 2.
4ext will load. Select "wipe/format" → "format all partitions (except sdcard)" and then also "wipe data/factory reset."
Now go back and select "install from sdcard" → "choose zip from sdcard" → and then select the ICS or JB zip you copied to the SD card in step 3.
Now either the ICS/JB installer will load or it will just install in one step. Just follow the prompts to install and enjoy.
Depending on the ROM you chose you may need to install Google apps (see the specific ROM thread for details) and will also likely want to flash an apps-to-SD script as mentioned above so you do not run out of space.
This method worked perfectly for me, hopefully it will work well for you as well. Enjoy.

Great work, your guide is amazing!!! I followeed it and ended with an infinite bootanimation , I'm trying to discover what I did wrong :fingers-crossed:, but the guide was superb!

diegolm said:
Great work, your guide is amazing!!! I followeed it and ended with an infinite bootanimation , I'm trying to discover what I did wrong :fingers-crossed:, but the guide was superb!
Click to expand...
Click to collapse
I am sorry to hear that. Can you boot into recovery or is that broken as well? If you can boot into ext recovery try selecting "wipe/restore" → "wipe data/factory reset" and then try to install BCM again. I probably should have added that above, I will do that now.
If your recovery is broken but you can get into the bootloader (holding down trackball while starting up), you should be ok. You will probably need to flash Amon_Ra's Recovery using Hboot as was described in the guide from cyanogenmod link above. If there is a way to directly hboot flash 4ext recovery I don't know how to do it. Then you can try installing BCM again from the Amon_Ra's recovery and re-install 4ext after you get everything working.

I tried the Texasice ROM and it worked, but I didn't like it! Later I tried again BCM and It worked! I dont know, maybe I did something wrong... Anyway thanks again for the guide!!

Does work the same if using fastboot method? Thx
Sent from my Nexus One using Tapatalk 2

intel415 said:
Does work the same if using fastboot method? Thx
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
I am not sure which part you are referring to, but, yes, a few of the above instructions could be replaced with fastboot commands.

The adb commands, instead using adb I can use fastboot commands right. That's what I used to root my n1 kinda familiar with fastboot. Thx
Sent from my Nexus One using Tapatalk 2

intel415 said:
The adb commands, instead using adb I can use fastboot commands right. That's what I used to root my n1 kinda familiar with fastboot. Thx
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
I used the adb commands above because you can use adb to reboot directly into recovery (fastboot you can only reboot normally or into the bootloader) and you can also use adb to directly install apk files - fastboot cannot do those two things - it is more for flashing images (recovery, roms, etc). In order for adb to work make sure you have usb debugging enabled: go to "Settings" → "Applications" → "Development" → enable "USB debugging."
Note that adb commands are not required - you can reboot into recovery and install the 4ext manually.
It won't let me post a link right now, but just google "adb commands" to find a list of all the commands you can use.
Hope that helps.

Thx. All I need it was to install black rose and partition it. Put zip on SD card wipe and flash. Installation was easier than I thought it would be lol
Also on ur guide you forgot to put 200 for the data part. You only had 220 and 16
Thx again got ics installed on my n1 smoother than cm 7.2
Sent from my Nexus One using Tapatalk 2

intel415 said:
Thx. All I need it was to install black rose and partition it. Put zip on SD card wipe and flash. Installation was easier than I thought it would be lol
Also on ur guide you forgot to put 200 for the data part. You only had 220 and 16
Thx again got ics installed on my n1 smoother than cm 7.2
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
Yeah, its not bad - glad you got it working! ICS has been smoother than cm 7.2 for me as well.
Blackrose didn't ask me about userdata - it just assumed that automatically after putting in 220 system and 16 cache... I'll make note of that in the guide so its clearer. Thanks.

Got the issue with not being able to get into recovery after step 4, but I don't have the recovery image to flash. Once the SD card was formatted in step 2 I don't have a download folder. I attached what is in my SD card right now. Help please.

Look for "recovery.img"
bobbyphoenix said:
Got the issue with not being able to get into recovery after step 4, but I don't have the recovery image to flash. Once the SD card was formatted in step 2 I don't have a download folder. I attached what is in my SD card right now. Help please.
Click to expand...
Click to collapse
Try to find if there is a "recovery.img" anywhere on your SD card, perhaps in the 4ext folder?
If you can't find it, do not worry, you can just go to the first page of this thread, click on the link labeled "follow this guide from Cyanogenmod" and then go to the section on how to download and install Amon_Ra's Recovery. Once you get Amon_Ra's recovery flashed you will be able to install any ROM of your choice.
You can reinstall the 4ext recovery later if you want.

c2med said:
Try to find if there is a "recovery.img" anywhere on your SD card, perhaps in the 4ext folder?
If you can't find it, do not worry, you can just go to the first page of this thread, click on the link labeled "follow this guide from Cyanogenmod" and then go to the section on how to download and install Amon_Ra's Recovery. Once you get Amon_Ra's recovery flashed you will be able to install any ROM of your choice.
You can reinstall the 4ext recovery later if you want.
Click to expand...
Click to collapse
OK I'm stuck on what the path name is suppose to be. I tried it every way I can think of. Can you take a look at my screen shot, and tell me where I'm going wrong? The recovery image is on my desktop, so I'm not sure what exactly I should be replacing "path" with. I tried it from the link, and how you have it in your note. You don't have the "/to/" after path as in the CM link.

Well I tried a couple more times, and I can get it to seemingly do it, but it just hangs on this: (see screen shot) I get no error, and if I try to enter recovery on the phone I still get the reboot to the android and triangle with the ! in it.

place the recovery under the folder which contains fastboot.exe and rename it to recovery.img
now use the command
fastboot flash recovery recovery.img from platform-tools directory
Sent from my Nexus One using Tapatalk

And right-click this folder while pressing the SHIFT key on your keyboard. Then choose "Open command window here".

n1newbie said:
place the recovery under the folder which contains fastboot.exe and rename it to recovery.img
now use the command
fastboot flash recovery recovery.img from platform-tools directory
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
tommert38 said:
And right-click this folder while pressing the SHIFT key on your keyboard. Then choose "Open command window here".
Click to expand...
Click to collapse
WOW Thank you both. I spent literally hours yesterday trying to get it to work. Tried your suggestions, and in five minutes it was up and running!
---------- Post added at 12:31 PM ---------- Previous post was at 11:33 AM ----------
I may have spoke too soon. I followed the instructions to the end. Installed the ROM, and rebooted, but now after the X I get the Spazdog splash screen with the big Z in the middle and green dots moving, but it stays there forever. I waited 20 minutes one time. Tried reflashing, but I get the same thing.
---------- Post added at 01:17 PM ---------- Previous post was at 12:31 PM ----------
Just giving an update on progress (in case someone else is in my boat too) Flashed back to stock GB. Reinstalled recovery, and reflashed Spaz. Got past the X, and the splash screen, but now it's stuck on the Android logo that looks like the night rider beam that goes across the word. Been there now for about 10 minutes.

You do have Blackrose, right?

Yep. Installed everything according to OP. I think it may be the partition sizes as I think flashing back to GB messed with them. It says 220 and 10, but after checking some threads, it looks like there is one missing (userdata). I tried flashing a custom GB from here http://forum.xda-developers.com/showthread.php?t=1214543&page=98 and I was able to install everything. Got it up and running, so I'm going to start over for ICS, or do you think I can flash one of these for ICS http://forum.xda-developers.com/showthread.php?t=1637166 , and then just flash the ROM after?

220/10 means that you have 220MB for system and 10MB for cache, everything that's left will be userdata, so it doesn't ask (total is ~436MB, so userdata will be ~206MB in that case).
In HBOOT you can check how large your partitions are, or you could use the FreeSpace app for example. Always make sure your system partition is large enough before flashing a ROM.

Boot loop problem

Hello,
I tried installing a custom ROM on my 7310 and it had issues. I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop. I think I need to repartition, but when I click the repartition checkbox in ODIN I get an error.
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Thanks.

A few questions:
spazlon said:
I tried installing a custom ROM on my 7310 and it had issues.
Click to expand...
Click to collapse
What did you try to flash and how did you try doing it (CWM, ODIN, ...)?
What 'issues'?
I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop.
Click to expand...
Click to collapse
How far into the boot sequence does it get?
Are you able to get into recovery?
If so, what recovery do you have (Stock vs CWM)?
Have you tried seeing what is causing the boot-loop using adb?
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Click to expand...
Click to collapse
This is an action of last resort. Exhaust all other avenues first.

boscorama said:
What did you try to flash and how did you try doing it (CWM, ODIN, ...)?
What 'issues'?
Click to expand...
Click to collapse
I used CWM to flash AOSP 4.1.2. It seemed to work fine for a day or two, but then it needed charging (as normal). I let it charge over night and in the morning it had less battery. I figured the charger or cable were flaky so I tried another set on another outlet and same thing. Then it finally ran out of battery. I let it charge again over night and when I tried to turn it on it was really slow. The boot animation was only 1 frame every couple seconds. It would eventually boot all the way up, but it was still REALLY slow. So I went into CWM and reflashed the same ROM. Then I got a boot loop of the boot animation. I couldn't get into CWM any more, so then I went into download mode and flashed the official firmware and flashed it with ODIN.
boscorama said:
How far into the boot sequence does it get?
Click to expand...
Click to collapse
Now when I turn it on it just says, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I can flash again with ODIN and it will get to the Samsung boot animation and just pulse SAMSUNG.
boscorama said:
Are you able to get into recovery?
If so, what recovery do you have (Stock vs CWM)?
Click to expand...
Click to collapse
If I hold power and volume down I can get into download mode or Samsung recovery, not CWM, and power with volume up doesn't do anything.
boscorama said:
Have you tried seeing what is causing the boot-loop using adb?
Click to expand...
Click to collapse
I don't know anything about adb and I'm not sure what I would be looking for. Is there a tutorial I can follow somewhere?
Thanks for any help!

This worked for me with similar problem
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.

Thanks! I'll give this a try when I get home. I'll let you know how it works out.

Don't ever try to 'repartion unless you really know what you're doing. You're soft bricked. Repartion and you'll hard brick.
I'd go back and get hc from sammobile and flash that with Odin. Ics has had some problems.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

jd1639 said:
Don't ever try to 'repartion unless you really know what you're doing. You're soft bricked. Repartion and you'll hard brick.
I'd go back and get hc from sammobile and flash that with Odin. Ics has had some problems.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Agreed - my procedure avoids manual repartitioning - I tried lots of other procedures but none worked. I think my data partition had become corrupt because I kept getting error messages. My first try was to recover with my cwm recovery file I made originally but I kept getting back to the boot loop .

spazlon said:
Hello,
I tried installing a custom ROM on my 7310 and it had issues. I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop. I think I need to repartition, but when I click the repartition checkbox in ODIN I get an error.
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Thanks.
Click to expand...
Click to collapse
I always got something like that ...
After bootloop just go to recrovery mode then factory riset ... its 100% WORK
Sent from my GT-P7300 using xda premium

I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.

spazlon said:
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
Click to expand...
Click to collapse
Sorry - being a newbie myself I'm at a loss. It worked a charm for me.

spazlon said:
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
Click to expand...
Click to collapse
did a format /system before installing the custom roms? This is an important step.

prince93 said:
did a format /system before installing the custom roms? This is an important step.
Click to expand...
Click to collapse
This fixed it. Never had to do it with any of my other devices. CM10 loaded quickly after that. Loving how fast JB is!
Thanks!
Sent from my GT-P7310 using Tapatalk HD

It worked
mobjunky said:
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Click to expand...
Click to collapse
WOw! This fixed my Tablet! thank you ever so much!!

mjramos15 said:
WOw! This fixed my Tablet! thank you ever so much!!
Click to expand...
Click to collapse
mobjunky said:
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Click to expand...
Click to collapse
Gee thanks. This saved my tab. I'd almost given up on it and then voila.

[Q] First time trying to download CyanogenMod.. so confused!!

Hi there.
I thought i'd try and get the 4.4 update for my Xperia SP as it was lagging a lot and causing me a lot of headache. So spent most of the day trying to figure out how to download CyanogenMod.. and i've got up to Now send the package you want to apply to the device with "adb sideload <filename>... I don't even know how to do that as I'm not techy at all
Was i supposed to send the package to the sd card before doing all this process? I wiped the data rom thing but had backed it up onto SD card before doing that. I restored it so I could try and move the package from the computer to my SD card but my phone just stays on a black screen
Have I broken my phone? Someone please help me as frustrated is an understatement right now. Not to mention crying like a little baby.....
Thanks in advance.

You must connect your sd card to pc through recovery or sd adaptor ( if your phone isn't booting), and extract kernel (boot.img) from the rom zip to your pc and flash the kernel (boot.img) with flashtool on fastboot mode, then enter on recovery and flash the rom zip

Methods
thewinterman said:
Hi there.
I thought i'd try and get the 4.4 update for my Xperia SP as it was lagging a lot and causing me a lot of headache. So spent most of the day trying to figure out how to download CyanogenMod.. and i've got up to Now send the package you want to apply to the device with "adb sideload <filename>... I don't even know how to do that as I'm not techy at all
Was i supposed to send the package to the sd card before doing all this process? I wiped the data rom thing but had backed it up onto SD card before doing that. I restored it so I could try and move the package from the computer to my SD card but my phone just stays on a black screen
Have I broken my phone? Someone please help me as frustrated is an understatement right now. Not to mention crying like a little baby.....
Thanks in advance.
Click to expand...
Click to collapse
Your phone is broken. Now you can throw it away and hope for the best.
Okay I was kidding!
To get your phone back, you may need to at least know how to use a Flashtool. But don't worry I'll point out one by one.. I recommend viewing this post on a desktop browser, as Tapatalk does not show nested [ hide ] correctly.
The prerequisites are a Williams Kernel v7 (Direct DL link) and Flashtool and a custom ROM's .zip of your choice.
Put the custom ROM zip into your SD card by any means possible. Or you may use a OTG cable to connect to a flash drive.
Install flashtool
Execute the drivers installer located within "drivers" folder inside Flashtool's install directory (default C:\Flashtool\drivers)
Tick "flashmode drivers", "fastboot drivers" and lastly scroll down a little bit, find "Common drivers for Viskan board" and tick that as well. Finish the installation
Open flashtool. Make sure you ran it as an administrator to avoid conflicts.
Hit the lightning icon
Choose fastboot mode
Hit "Select kernel to flash"
Navigate to and select the downloaded kernel earlier. You may unable to see your kernel. Please change the file type from "*.sin" to "*.elf".
Continue. This will ask you to connect your XSP in fastboot mode. To do so, make sure your phone is turned off completely, hold volume rocker up and connect it to your computer. Once the LED bar lights blue, you may release the volume rocker.
Flashing process will run. It is important not to interrupt the process!
Once complete, remove the cable from your phone and turn it on.
Hit volume up when the lights blink to get into CWM recovery
From another guide:
3) Flashing the custom ROM
You can navigate in CWM by using the volume and power keys or by swiping the screen up, right, down, left.
NOTE: Please understand methods are vary for different ROMs. Please prioritise steps provided in a custom ROM thread. This guide however, can be regarded as a "logic" for you to flash such custom ROM.
Wipe everything you can.
WARNING: Please be careful to not wipe the /boot.
go to "Mounts and storage"
Format /system
Format /data
Format /cache
Go back to main menu
Get into "Advanced" > "Clear Dalvik Cache" (this is quite optional)
Go back to main menu
Attempt "Wipe data/factory reset"
Flash the custom ROM zip you've downloaded.
Go to "Install zip"
Choose "Choose zip from /storage/sdcard1" (I am assuming you've put the zip into your SD card)
Navigate to the zip you've copied, and select it
Choose "yes"
Flash gapps. The flashing process is similar to how you flashed the custom ROM zip based on the steps above.
Reboot the phone
You now have your preferred custom ROM installed! Congratulations! Set up your phone as usual now.
Restore your applications backup if you wish to have your apps back.
Your steps end here.
Click to expand...
Click to collapse
If you want to learn more: [Guide] How to use Flashtool

TechnoSparks said:
Your phone is broken. Now you can throw it away and hope for the best.
Okay I was kidding!
To get your phone back, you may need to at least know how to use a Flashtool. But don't worry I'll point out one by one.. I recommend viewing this post on a desktop browser, as Tapatalk does not show nested [ hide ] correctly.
The prerequisites are a Williams Kernel v7 (Direct DL link) and Flashtool and a custom ROM's .zip of your choice.
Put the custom ROM zip into your SD card by any means possible. Or you may use a OTG cable to connect to a flash drive.
Install flashtool
Execute the drivers installer located within "drivers" folder inside Flashtool's install directory (default C:\Flashtool\drivers)
Tick "flashmode drivers", "fastboot drivers" and lastly scroll down a little bit, find "Common drivers for Viskan board" and tick that as well. Finish the installation
Open flashtool. Make sure you ran it as an administrator to avoid conflicts.
Hit the lightning icon
Choose fastboot mode
Hit "Select kernel to flash"
Navigate to and select the downloaded kernel earlier. You may unable to see your kernel. Please change the file type from "*.sin" to "*.elf".
Continue. This will ask you to connect your XSP in fastboot mode. To do so, make sure your phone is turned off completely, hold volume rocker up and connect it to your computer. Once the LED bar lights blue, you may release the volume rocker.
Flashing process will run. It is important not to interrupt the process!
Once complete, remove the cable from your phone and turn it on.
Hit volume up when the lights blink to get into CWM recovery
From another guide:
If you want to learn more: [Guide] How to use Flashtool
Click to expand...
Click to collapse
Sorry for the late reply. But thank you so much! Spent 15 hours trying to fix the darn thing. Only got 3 hours of sleep :-/ I am enjoying a fresher new faster phone. So thank you so much, you are awesome!

thewinterman said:
Sorry for the late reply. But thank you so much! Spent 15 hours trying to fix the darn thing. Only got 3 hours of sleep :-/ I am enjoying a fresher new faster phone. So thank you so much, you are awesome!
Click to expand...
Click to collapse
Nice! Have fun with your fixed phone!

Bravo!!!
You are a life saver man..I got my Xperia SP back by your guide.
Best Wishes..

[NO ROOT] How to Install TWRP & custom ROM without root on Galaxy S5 G900

Hello!
This thread is to teach you how to flash TWRP, along with a custom ROM on your T-Mobile Galaxy S5 WITHOUT root!
DISCLAIMER:
Read the whole thread at least one before trying!
Anything you do to your device is your own decision. I am not forcing you to do this. If you screw something up during the process, that isn't my fault.
Custom ROMs can sometimes be unstable. PLEASE make sure you are downloading the correct file for your device model.
Tampering with your device's firmware, including custom recoveries, ROMs, or rooting your device WILL VOID THE WARRANTY.
Flashing a custom ROM WILL DELETE YOUR DATA. Consider backing up your apps, photos, videos, files, etc. online or to an external storage.
Before we start, we need to download a few things.
*Do not download anything with Safari! Safari unzips zip files, but we want them to stay zipped. DO NOT RE-ZIP THE FILE YOURSELF!!! It will not be zipped in the correct format!*
1. Odin v3.12.3: (Odin)
2. The TWRP recovery tar file: (TWRP)
3. Your custom ROM zip file. (There are many ROMs out there, but Lineage is a pretty good one: (Lineage OS klte) Choose the most recent release.) IMPORTANT: Make sure you download this to your phone's internal/external storage to an easily accessible location.
4. A GApps package. This is required if you want to be able to download apps from the Google Play Store. Go to the Open GApps page and choose ARM, and Android 7.1. You shouldn't need anything more that micro. IMPORTANT: This file also goes onto your phone's internal/external storage.
5. Your device drivers. Most of the time, Windows will automatically install the required drivers once you put in the device, but in the case this doesn't happen, try googling your devices model number and "windows drivers." Follow the process to install.
Alright, with that out of the way, let's install TWRP.
1. With your phone unplugged, boot into "Download mode." Power off your device. Then hold down the Power, Home, and Vol- buttons until you see a warning pop up.
2. Accept the warning by clicking Vol+.
3. Run the Odin exe file we downloaded earlier. (You may have to unzip the file first.)
4. Go to Options and disable auto reboot. Go back to the Log tab.
5. Plug your device into the computer. You should see Odin say "ADDED!" on the side.
6. Click "AP" and locate the TWRP recovery tar file we downloaded earlier.
7. Once you select the file, click "Start."
8. When finished, it should say "PASS" at the top. This is where you unplug your phone and remove the battery.
9. Wait 10 seconds before putting the battery back in.
10. Try booting into recovery by holding down the Power, Home, and Vol+ buttons. If it reads "Team Win Recovery Project" at the top, then congrats! You've successfully flashed TWRP! If it says at the top "stock recovery," try the whole process again from step #1.
Now we can flash your custom ROM!
1. This is where we wipe your phone's data. Click on "Wipe." Then Swipe to factory reset.
2. After you have wiped your device, click on "Install"
3. Now navigate to the ROM zip file and select it.
4. Click on "Add more zips"
5. Navigate to the GApps zip file and select it.
6. Swipe to install. This can take some time, so grab a cup of coffee and maybe check out my Youtube channel?
7. The moment of truth: click on Reboot, then System. The first boot can take a minute. If it doesn't show up after 5 minutes, remove the battery and try wiping and flashing again.
CONGRATULATIONS!! You've installed a custom ROM! Enjoy! :laugh:
EXTRA:
If you want to enable root on your Lineage OS device, you must flash an additional file first.
1. Go to this link and download the first su (arm) file and save it to an easily accessible location.
2. Boot into recovery mode once again by powering off your device, then pressing and holding Power, Home, and Vol+ until TWRP appears.
3. Click on install.
4. Select the su zip file we downloaded earlier.
5. Swipe to install.
6. Once it is installed, boot back into system.
7. Navigate to developer options in settings.
8. Scroll down to"Root Access" and change it to either Apps, or Apps and ADB.
Awesome, now you have root!
Thanks for the help:
[url]https://forum.xda-developers.com/tmobile-galaxy-s5/general/root-how-to-root-sm-g900t-firmware-t3358190[/URL]

I did not work for me, when I go recovery mode it shows:
Could not do normal boot
Odin mode.
I'm definitely not an pro at this, so can anyone help me please

Worked perfectly on the latest stock OTA!

Doesn't work for me. When I reboot in recovery ode, instead of TWRP loading I get a generic Android Recovery screen with a few options - reboot system now, reboot to bootloaded, apply update from ADB apply update from SD card, wipe data/factory reset, wipe cache partition, mount /system, view recovery logs, power off. Now sure how to proceed....

bradmccoy said:
Doesn't work for me. When I reboot in recovery ode, instead of TWRP loading I get a generic Android Recovery screen with a few options - reboot system now, reboot to bootloaded, apply update from ADB apply update from SD card, wipe data/factory reset, wipe cache partition, mount /system, view recovery logs, power off. Now sure how to proceed....
Click to expand...
Click to collapse
We’re you sure to unplug and remove the battery? This is essential to ensure the phone powers down. If you just power down the phone will reset the recovery to avoid TWRP. You have to remove any power source to force a shutdown before it can reset. Please feel free to respond and I’ll be happy to help to the best of my abilities!

Thank you so much for this tutorial. It worked perfectly in my SM-G900MD, and it's easier than the method suggested by the Lineage OS page itself. :good:

Thanks, these steps worked just fine on an SM-G900T, and were very easy to follow.

Thank you! This worked beautifully.
Only thing that didn't work the first time is, is that it told me to download the Gapps Android 8.1 file instead of 7.1.

I hear people talking of unlocking the bootloader in order to install a custom ROM. Why haven't you mentioned that in this article?

Had the "FAIL! (Auth)" problem with flashing TWRP with Odin.
It seems that after I have disabled Reactivation Lock (the standard feature that requires activation of the phone with Samsung account) it helped to succeed flashing TWRP.

Hi All,
Thanks for a great and useful guide. Whilst it says this can be achieved without root, which is fantastic... It doesn't mention anything about tripping Knox or not?? I assume this will trip the Knox counter, won't it ?? Or do this method bypass that ??
Thanks, Lister

adult supervision needed for Samsung S5 Lineage 17 install
Hi, I'm good with adb and fastboot, running Linux with the commandline Odin4. I can get the phone to the warning screen about the danger of installing other Roms. How do I proceed? What are the commandline options to use to flash the LineageOS 17 with odin4 ? The Odin4 help file isn't very helpful.

Could not do normal boot
I am not an expert at this and I am having the same issue as The Verg
I have a message at the top "Could not do normal boot" same as him
I've been at this for 2 days now I'm just about at my ends wit
My phone is a Samsung S5 Active model SM-G870W
and I can easily rooted it or reinstall the stock file and put it back to original
and I've done that hump time but this TWRP file I just can't install it
to update this phone to a more recent software and basically install
an S8 or S9 software in it (mind you version 9 Pie would be OK0
and make this old phone a real beast.
I read somewhere about the OEM button which does not exist on this phone
whatever explanation they are giving to unlock it and make the button appear
all of a sudden is bs in my book.
Now please help me with this phone and the other guy by the same token
Is there another way I can get into this phone and wipe it clean and
boot it with thru the abd file or access the sd card or the internal
storage of the phone.
How can I add a picture of my phone to this thread