Make photos in 0 light condition,how to focus?? - One (M7) Q&A, Help & Troubleshooting

I noticed a very bad thing with camera (software??)
Someone know how to make photos in absolutely dark place ( read you can't see anything).. is always out of focus
I cone from a Samsung s3 that in these situations was making a first flash for lock focus,then another flash to shoot photo.. but our HTC in not..
Any tip please?
Inviato dal mio HTC One con Tapatalk 2

Turn the lights on.

Easy xD.. someone tried in a disco ? My preoccupation was for there,bit maybe are only a preoccupation.. what you think guys ?
Inviato dal mio HTC One con Tapatalk 2

You could try downloading a camera app the features manual focus, but even still if you absolutely can't see you'll have to guess and try it a few times to get it right.

Related

HELP! need app

Hello, I need application using the GPS to measure how many square meters is an area. Thank you in advance.
Try A2 or GPS area calculator
Inviato dal mio HTC HD2 con Tapatalk 2

Cyanogenmod 10.1 and lux auto brightness

Hello everyone, I have a problem with the application Lux auto brightness, the problem is that this application should change the brightness automatically, but for me it is only possible to change with negative numbers. Between 0% and 100% I see no changes, I read that the developer said to be a bug of the rom but I have not understand . Can someone help me :banghead:
Inviato dal mio GT-I9000 con Tapatalk 2
R: Cyanogenmod 10.1 and lux auto brightness
I have asked at the developer and this is the response?
"If it can only change subzero values, then your ROM/kernel isn't passing on the brightness values to the display. I use the Android API for this, so it should work fine. Also check that you haven't put Lux into sleep mode (see if it says 'sleeping' in the notification)."
My app isn't in sleep mode but I don't understand all the response can someone translate it in a comprehensive language for me
And any solution for this?
Inviato dal mio GT-I9000 con Tapatalk 2
R: [NIGHTLY][ROM][4.2.2] CyanogenMod 10.1 for Samsung Galaxy S
I try again
quack75 said:
Hello everyone, I have a problem with the application Lux auto brightness, the problem is that this application should change the brightness automatically, but for me it is only possible to change with negative numbers. Between 0% and 100% I see no changes, I read that the developer said to be a bug of the rom but I have not understand . Can someone help me :banghead:
Inviato dal mio GT-I9000 con Tapatalk 2
Click to expand...
Click to collapse
quack75 said:
I have asked at the developer and this is the response?
"If it can only change subzero values, then your ROM/kernel isn't passing on the brightness values to the display. I use the Android API for this, so it should work fine. Also check that you haven't put Lux into sleep mode (see if it says 'sleeping' in the notification)."
My app isn't in sleep mode but I don't understand all the response can someone translate it in a comprehensive language for me
And any solution for this?
Inviato dal mio GT-I9000 con Tapatalk 2
Click to expand...
Click to collapse
Any help are welcome, also a comment please
Inviato dal mio GT-I9000 con Tapatalk 2
R: [NIGHTLY][ROM][4.2.2] CyanogenMod 10.1 for Samsung Galaxy S
I try again
quack75 said:
Hello everyone, I have a problem with the application Lux auto brightness, the problem is that this application should change the brightness automatically, but for me it is only possible to change with negative numbers. Between 0% and 100% I see no changes, I read that the developer said to be a bug of the rom but I have not understand . Can someone help me :banghead:
Inviato dal mio GT-I9000 con Tapatalk 2
Click to expand...
Click to collapse
quack75 said:
I have asked at the developer and this is the response?
"If it can only change subzero values, then your ROM/kernel isn't passing on the brightness values to the display. I use the Android API for this, so it should work fine. Also check that you haven't put Lux into sleep mode (see if it says 'sleeping' in the notification)."
My app isn't in sleep mode but I don't understand all the response can someone translate it in a comprehensive language for me
And any solution for this?
Inviato dal mio GT-I9000 con Tapatalk 2
Click to expand...
Click to collapse
Any suggestions are welcome also a comment
Inviato dal mio GT-I9000 con Tapatalk 2
I am going to admit that I have no idea what's wrong, but let's get the debugging process rolling anyway.
First question: Have you tried asking in the CM10.1 thread?
Second question: Have you tried disabling the auto brightness feature in settings?
Third question: Are you running stock CM10.1 kernel?
R: Cyanogenmod 10.1 and lux auto brightness
snapper.fishes said:
I am going to admit that I have no idea what's wrong, but let's get the debugging process rolling anyway.
First question: Have you tried asking in the CM10.1 thread?
Second question: Have you tried disabling the auto brightness feature in settings?
Third question: Are you running stock CM10.1 kernel?
Click to expand...
Click to collapse
Thanks for your reply
1. Yes I have asked two times but no one have replied
2. I have tried all possible combination with the option of the rom and the application without results
3. I'm running all stock rom
Inviato dal mio GT-I9000 con Tapatalk 2
Assuming that the developer is correct, then either cyanogen mod omitted something critical for the app, or the auto brightness feature is locked down by the auto brightness control of cyanogen mod. Either way is not something you can solve easily.
My recommendation would be to try out another AOSP rom. I have switched to paranoid android recently after using cyanogen mod for two and a half years. Compared to other AOSP roms in order to try out the pie control feature.
Sent from my Nexus 4 using Tapatalk 2
R: Cyanogenmod 10.1 and lux auto brightness
Okay this is not a solution, but if I wanted to feel paranoid that tread do you recommend? I use cyanogen nightly for its continued development
Inviato dal mio GT-I9000 con Tapatalk 2
R: Cyanogenmod 10.1 and lux auto brightness
I have found the problem /solution is an incompatibility with swipepad (only top corner)
Inviato dal mio GT-I9000 con Tapatalk 2
Well done, and thanks for reporting back.
Sent from my Nexus 4 using Tapatalk 2

ipcam

I currently used a couple of ipcam Foscam, perfectly working with Galaxy note, S3 and S2, both wifi and 3g. The ipcam are on ports 5060 and 5600, ddns with no-ip.
Now I'm owning a new Xperia Z purple, and no way to see the cam!
tried many app, tried also with browser (maxthon). page not available!!!
It seems the phone is unable to see any ports other the 80, both in 3g than wifi.
Result, I cannot see my cameras, but with samsung all fine!
Anyone can help?
Nobody uses any ip camera?
Inviato dal mio GT-N7000 con Tapatalk 2
i guess you are using some surveillence ip cams that do have a dedicated login-page which shows all cams. Maybe eagleeye or avtech? Well, no matter what: its probably related to flashplayer capability of the browsers you use, as it isn't supported by adobe/google etc anylonger, so no recent browser supports it by default. You can google and find out how to install flashplayer on dolphin browser though.
Sent from my C6603 using xda premium
I have 3 different types of webcam, all on different ports. This works fine...
http://hit-mob.com/ip-cam-viewer-android
Also I am pro user of ipcam viewer.
And it is ok on galaxy s3, s4 and Note.
But no result on xperia.
Same wifi, or same 3g.
So the issue is on my xperia: what firmware are you running?
Inviato dal mio GT-N7000 con Tapatalk 2
Used it on all stock firmwares, 350, 434, 253 and now 307. Also working fine on tablet z
Any idea what I can do? The phone is new, no brand and stock. Internet browsing is ok, only this issues with cameras.
Inviato dal mio GT-N7000 con Tapatalk 2
gnokkia said:
I currently used a couple of ipcam Foscam, perfectly working with Galaxy note, S3 and S2, both wifi and 3g. The ipcam are on ports 5060 and 5600, ddns with no-ip.
Now I'm owning a new Xperia Z purple, and no way to see the cam!
tried many app, tried also with browser (maxthon). page not available!!!
It seems the phone is unable to see any ports other the 80, both in 3g than wifi.
Result, I cannot see my cameras, but with samsung all fine!
Anyone can help?
Click to expand...
Click to collapse
It's more than likely a problem with the app than the phone, I use an app specific for my DVR and it works fine. I have also used different Apps with different DVR's and they work fine.
Tried many apps with same results, tried also many browsers: unable also to view config page of the camera, pages unavailable. It seems that all ports are blocked!
Some minutes ago tried a factory reset, but the issue remain the same.
I.e. Typing 192.168.1.1:80 I enter in config page of my router, typing 192.168.1.200:5060 page unavailable.
But typing 192.168.1.200:5060 in my note send me in config page of ip-camera!
Inviato dal mio GT-N7000 con Tapatalk 2
Are you sure your xperia is on the same Wi-Fi network as your cameras, and not just connected to the mobile phone network. What's your phone's IP address? (Tap on your wireless network name in Settings, Wi-Fi to show)
192.168.1.10 assigned by my DHCP. Same problem accessing from 3g connection.
Inviato dal mio GT-N7000 con Tapatalk 2
I can only think something is acting as a firewall on your phone. Got any security software installed? Other than that, sorry, fresh out of ideas.
I've got same idea about firewall, but.... Where is? And why only on my phone ?
Reset phone some hours ago, no software installed, and macafee uninstalled.
So, no more ideas, remaining only to change firmware.... But I do not like to do this on a phone with 6 days lifetime!
Everycase, thank for your interest!
Inviato dal mio GT-N7000 con Tapatalk 2
So, the only way I am seeing is trying to install a new firmware stock. Question one: I'm running 10.11.A.1.253, what's the best/never firmware I can try?
Question two: how to backup/download my original firmware (deutch)?
Inviato dal mio GT-N7000 con Tapatalk 2
Downgraded to 434. Same results. Internet ok, no way to see ip camera. May be I need to try Cyanogenmod?
Inviato dal mio GT-N7000 con Tapatalk 2
Now upgraded to 4.2.2 Spain Firmware.
All ok, but same issues of previous firmwarw.
Not possible to see ipcam.
Anybody experience thjs?
Inviato dal mio GT-N7000 con Tapatalk 2
Anybody tried ipcam with CM?
Inviato dal mio GT-N7000 con Tapatalk 2
I use ip cam viewer pro application on axis mobotix and cisco ip cameras, no problem at all.
Sent from my C6603 using Tapatalk 4 Beta
What port are you using?
Inviato dal mio GT-N7000 con Tapatalk 2
New part of this incredible saga. Started test with Yawcam, that let me manipulate the ipcamera data simply.
Obviously the video stream do not function, but the http session ( 1 jpeg image ) works! So that is not an issue of ports or firewall, but an issue regarding the streaming. Maybe an hardware fault?
Inviato dal mio GT-N7000 con Tapatalk 2

Effects on front camera

How can I use the special effects of the camera with the front one? I don't see the button to swap between front and rear.
Inviato dal mio C5303 utilizzando Tapatalk
Not, It is possible to alter the effects with another application like Camera360 or something similair.

Camera black screen?

Hi guys, my phone fell from a chair and now the camera present a black scree. Front camera is ok.
Tried with google camera app and black screen too.
Can the restore solve the problem? Maybe it's an hardware problem.
Thanks
Inviato dal mio D5803 utilizzando Tapatalk

Categories

Resources