Database Develop

➣Adrenaline™ Boost For All Android Devices ! [ Prime ] | 22/10/2013

░▒▄█▀▄░ █▀▄ █▀▀▄ █▀▀ █▄░█ ▄▀▄ █░░ ▀ █▄░█ █▀▀░░▒▐█▀▄░ ▄▀▄ ▄▀▄ ▄▀▀ ▀█▀
▒▐█▄▄▐█ █░█ █▐█▀ █▀▀ █░▀█ █▀█ █░▄ █ █░▀█ █▀▀░░▒▐█▀▀▄ █░█ █░█ ░▀▄ ░█░
▒▐█░▒▐█ ▀▀░ ▀░▀▀ ▀▀▀ ▀░░▀ ▀░▀ ▀▀▀ ▀ ▀░░▀ ▀▀▀░░▒▐█▄▄▀ ░▀░ ░▀░ ▀▀░ ░▀░
Caution:
Please read the thread carefully before you flash it into your system.
Adrenaline Boost may terminate your app like alarm ! One have reported to me that Adrenaline Boost terminated his alarm and almost make him lose his job because of woke up late
Proceed with your own risk !
For those who have already use my Adrenaline™ CPU Control, this is already included in the flashable zip package , so no need flash this again !
Description
This script act like an nitrous boost for your Ace.
It helps you to clear your system cache, get more free ram for you and gravely boosts your phone's performance !
*Best use before gaming/benchmark !
How it works?
Your phone's ram usage will get higher and higher everyday then you will find your ace become an @SS because it's turtle speed and only reboot fix this problem.
Our android os create system cache everyday, but after one day or so, those old caches are not longer in use but the os continuously create newer cache that's why the ram get heavier and heavier everyday !
Adrenaline Boost help you to clear those caches ! So you won't have to reboot again !
For those who have sharp eyes may find your battery life decreased. WHY?
Adrenaline Boost clear your system cache and your cpu will work harder to build back needed cache.
Some have reported to me that the Opera browser crash after boost when open over 3 tabs.
You system need caches to work , this boost is intended to clear old cache that are no longer using and let the system to build new cache, so if u boost it too often , your cpu will be very busy building needed caches and may consume more battery than normal !
Boost it only when it's needed then there will be no problem !
What you need:
A Fully Working Android Device
A Pair of Sharp Eyes
A Brain That Is Able To Think
Properly Rooted Device
Busybox
Terminal Emulator
How To Install ?
1) Download from the attachment below
2) Put into your sdcard
3) Reboot into CWM
4) Mounts /system
5) Flash it
6) Reboot
How to Use It?
1) Open terminal emulator
2) Type :
Code:
su
boost
For those who want to include this into your ROM, please give proper credits and a link directs to this thread, thanks
Screenshot :
Before Memory Free : 44.1172 MB
After Memory Free : 95.9102 MB
Memory Freed : 51.793 MB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to uninstall ?
Reboot cwm, mount /system and install THIS from sdcard.
Credits:
-LinuxInsight
-Bubnoff
Change Log:
-V2 > 14/3/2012 <
❖ Now it will tell your free ram before/after boost
-V3 > 3/4/2012 <
❖ Some UI Changes
-Prime >22/10/2013
❖ Lesser nags
To Devs:
You have agreed to this if you're going to use any parts of my work:
Code:
If you are taking any of my work as reference, please add credit and maybe a link of my thread would be nice.
Pm me and tell me about your project.
Provide 'do & don't' and warnings about issues that Adrenaline Boost could cause to end user's device.
If you're using my file, please do not edit my #comment or add any main function unrelated system outputs.
If you're using main function related code of my files, please add '#NAME_OF_MY_FILE by ImbaWind' on top of your file and maybe more precisely, which part of it.
I may use HOURS for an update but if you like my work,
please consider to use only one SECOUND to hit the THANKS button
It will make me happy and motivate me to update more often and add more features
Rate this thread ✯ ✯ ✯ ✯ ✯ and share it to your friends too!
**No need to delete V2 before flashing this, the old version will be replaced with new version automatically !
**Please Don't Mirror My Work, If you post it to anywhere else, please put a link direct to here !

1st!
A new post??? Lol

Adrenaline Boost Uninstaller
Works for all versions

There is such a feature in the V6 Supercharger
Herpderp Defy.

EmoBoiix3 said:
There is such a feature in the V6 Supercharger
Herpderp Defy.
Click to expand...
Click to collapse
yea i found out that after zeppelinrox told me he also have include this in his v6
but i think this is more convenient to use for those who want this feature only but not the whole v6

imbawind said:
yea i found out that after zeppelinrox told me he also have include this in his v6
but i think this is more convenient to use for those who want this feature only but not the whole v6
Click to expand...
Click to collapse
The new Supercharger allows to make a separate Fast_Engine_Flush.sh but meh , I'd use Adrenaline
Herpderp Defy.

EmoBoiix3 said:
The new Supercharger allows to make a separate Fast_Engine_Flush.sh but meh , I'd use Adrenaline
Herpderp Defy.
Click to expand...
Click to collapse
i don't quite like the v6 because it nags alot
i check my version of v6 (probably too old) last time , it's clear cache function only got
echo 3 > /proc/sys/vm/drop_caches
Click to expand...
Click to collapse
so at that time , i decided to make a new one with
Code:
sync;
echo 3 > /proc/sys/vm/drop_caches;
echo 1 > /proc/sys/vm/drop_caches;
anyway , thanks for your support

Hey bro, imbawind read my pm
Also can you tell me how you write like this?
░▒▄█▀▄░ █▀▄ █▀▀▄ █▀▀ █▄░█ ▄▀▄ █░░ ▀ █▄░█ █▀▀░░▒▐█▀▄░ ▄▀▄ ▄▀▄ ▄▀▀ ▀█▀
▒▐█▄▄▐█ █░█ █▐█▀ █▀▀ █░▀█ █▀█ █░▄ █ █░▀█ █▀▀░░▒▐█▀▀▄ █░█ █░█ ░▀▄ ░█░
▒▐█░▒▐█ ▀▀░ ▀░▀▀ ▀▀▀ ▀░░▀ ▀░▀ ▀▀▀ ▀ ▀░░▀ ▀▀▀░░▒▐█▄▄▀ ░▀░ ░▀░ ▀▀░ ░▀░

dhruv.always said:
Hey bro, imbawind read my pm
Also can you tell me how you write like this?
░▒▄█▀▄░ █▀▄ █▀▀▄ █▀▀ █▄░█ ▄▀▄ █░░ ▀ █▄░█ █▀▀░░▒▐█▀▄░ ▄▀▄ ▄▀▄ ▄▀▀ ▀█▀
▒▐█▄▄▐█ █░█ █▐█▀ █▀▀ █░▀█ █▀█ █░▄ █ █░▀█ █▀▀░░▒▐█▀▀▄ █░█ █░█ ░▀▄ ░█░
▒▐█░▒▐█ ▀▀░ ▀░▀▀ ▀▀▀ ▀░░▀ ▀░▀ ▀▀▀ ▀ ▀░░▀ ▀▀▀░░▒▐█▄▄▀ ░▀░ ░▀░ ▀▀░ ░▀░
Click to expand...
Click to collapse
replied pm

awesome script but after using does anybody else also feels lags while using some apps and typing in sms and whatsapp ?

You will get lag 9 times out of 10
tents said:
awesome script but after using does anybody else also feels lags while using some apps and typing in sms and whatsapp ?
Click to expand...
Click to collapse
Yes of course, you've just flushed your cache! This script will harm performance in most cases except in extreme situations where you will only use one app loaded freshly into memory.
Memory "optimisation" was all the rage on Windows back in the day, and it was a hoax (fully debunked by Mark Russinovitch in his excellent article "The memory optimization hoax"[1]), because 9 times out of 10 the kernel was a better estimator of reused binary data and memory page handling than the clueless user. Now we have the same "optimiser" for android, and I'm pretty sure 9/10 the same logic applies.
Recently these "optimisers" have started hitting the Mac app store, and they have been thoroughly discredited except in very rare use cases, yet naive users write they see more FREE memory (no they don't, they just see the result of readjustment of memory pages that the OS calls free but are no more FREE than they were before...).
Even the article he links to, many comments say this tuneable is for benchmarking, and doesn't help in optimisation in 99% of the cases.
No one has yet proved that flushing clean memory cache magically works better on android than it does on linux/os x/windows. I asked imbawind back in the old thread and his answer showed he "thinks" it works, but has no evidence it does.
Anyway, apart from getting lagginess as the android kernel repopulates useful cache data, nothing gets harmed so if you like the boosting placebo™®©℗ then enjoy...
----
[1] http://www.windowsitpro.com/article/internals-and-architecture/the-memory-optimization-hoax

iandol said:
Yes of course, you've just flushed your cache! This script will harm performance in most cases except in extreme situations where you will only use one app loaded freshly into memory.
Recently these "optimisers" have started hitting the Mac app store, and they have been thoroughly discredited except in very rare use cases, yet naive users write they see more FREE memory (no they don't, they just see the result of readjustment of memory pages that the OS calls free but are no more FREE than they were before...).
Even the article he links to, many comments say this tuneable is for benchmarking, and doesn't help in optimisation in 99% of the cases.
No one has yet proved that flushing clean memory cache magically works better on android than it does on linux/os x/windows. I asked imbawind back in the old thread and his answer showed he "thinks" it works, but has no evidence it does.
Anyway, apart from getting lagginess as the android kernel repopulates useful cache data, nothing gets harmed so if you like the boosting placebo™®©℗ then enjoy...
----
[1] http://www.windowsitpro.com/article/internals-and-architecture/the-memory-optimization-hoax
Click to expand...
Click to collapse
thanks for the loooooooooonnnnnnnnnnnng comment you have typed but all sources you have saw, make you feeeel like a pro are for pc/laptop, arent they?
yes, you may say 'Android is based on Linux, so if linux blah blah blah , Android are similar blah blah blah'
you asked me, now i ask you: how many ram do we have and how many ram do a pc/laptop have?
are u gonna to tell me that your phone are smoooooth when you have only 60/50/40/30/20/10/5/1 (mb) available left?
but how about pc/laptop? are u gonna to tell me they lag when they used 278mb of ram too ?
cache is meant for smoothness in higher spec machines because they may have 2/4gb of ram
like what i have said in first post:
Boost it only when it's needed
Click to expand...
Click to collapse
only boost when u feel lag then there wont be a problem !
always remember smartphone isn't exactly same with pc, especially low end smartphone
this tuneable is for benchmarking
Click to expand...
Click to collapse
this is bull**** for SGA, benchmark get even lower score after boost ,why ? benchmark a test for overall system performance, including CPU. we have cleared the ram so the cpu will work hard to create them back, in the other hand, cpu still need to handle the benchmark, thus you won't get higher score in benchmark cuz we only have 800mhz, single core
No one has yet proved that flushing clean memory cache magically works better on android than it does on linux/os x/windows. I asked imbawind back in the old thread and his answer showed he "thinks" it works, but has no evidence it does.
Click to expand...
Click to collapse
where
btw, i'm not gonna to bluff you, you can see users' feedback (but sadly many threads have been deleted by moderator, this is a new thread thus u cant see many comment here )
anyway, i accept criticism, but at least, you should try urself before leaving a negative comment here
many users(Ace,Fit,Gio,X10,X10 Mini,X10Mini Pro,X8 and many more) who have tried the Arenaline Boost told me that it really work, like more smooth when scrolling
here are some users' feedback
nicgoh said:
just shot my ace with themyth rom! its awesome! and i am sure that's not placebo effect! Good one bro!
Click to expand...
Click to collapse
Mikee.H said:
Worked Perfect Thanks alot.
Click to expand...
Click to collapse
i dont need to say too much, users' review represent everything
last, thank for your time to type the long comment, it increase my knowledge cause it make me to google
sorry for my english as it's not my primary language

tents said:
awesome script but after using does anybody else also feels lags while using some apps and typing in sms and whatsapp ?
Click to expand...
Click to collapse
it's normal
sometimes u will feel lag when using some apps because it's caches are still in use
after boost, u cleared all in use and not in use cache, cpu need to create it back therefore u will notice some feel lag but it will be much better after a few minutes, then u will notice the overall performance increase

Can you flash the new V2 the same way we did to V1 or do we need to delete V1 first.

rohanb10 said:
Can you flash the new V2 the same way we did to V1 or do we need to delete V1 first.
Click to expand...
Click to collapse
Obv bro delete v1 first.
Sent from my GT-S5830 using Tapatalk

rohanb10 said:
Can you flash the new V2 the same way we did to V1 or do we need to delete V1 first.
Click to expand...
Click to collapse
tents said:
Obv bro delete v1 first.
Sent from my GT-S5830 using Tapatalk
Click to expand...
Click to collapse
the flashable zip will replace the old one automatically

Hi imbawind, my comment certainly wasn't personal, thank you for taking the trouble to contribute to these forums. :beer:
I am not a kernel engineer specialised in low-memory systems, and I think neither are you. I do know that a lot of work goes into building the virtual memory system and read/write caches in OSes and people much more knowledgeable and talented than us tune, patch and rewrite the kernel to maximise its use. Google doesn't employ monkeys to slap any old kernel into an OS it has invested a lot of resources into, engineers work on this stuff day and night.
Obviously a smartphone has less memory, but that doesn't mean the relative scale of resource demand to supply is not similar to desktop (smartphone apps don't request huge chunks of memory like desktop apps, so perhaps the % demand isn't so different). But my major conceptual issue is in flushing data from caches applies to smartphones and desktops equally. If the kernel uses that data again (and it has lots of optimisations to manage disk / memory caches), you get a performance hit if you flush.
Regarding what users say -- sorry that certainly doesn't mean it actually "works". A couple of years back I was engaged in a dialog with the developer of a memory optimiser for OS X and he told me lots of users said it worked great, yet when he tried to show me measured evidence, he never could show anything other than negative performance. Lots of people are led by what they are told, it is human psychology and works for advertising since the beginning of time; SuperDuper Product X™ will make your computer better -- then it tells you you have "freed" memory and they don't understand it never freed memory, it just renamed inactive memory pages to free ones so the OS reports more free memory. That is why on the desktop it is called a hoax. It would take a clever computer scientist many iterations of benchmarks to tell us whether /proc/sys/vm/drop_caches really helps or harms smartphone performance and neither you or I or anyone else have that data.
But anyway, as I said above, apart from losing cached data the kernel may have to reread back and slow you down a bit, if people enjoy typing the command and feeling they've done something with this script, then that is great. Remember that placebo medicine is very good medicine, it has a measurable positive effect, and is cheap and invariably harmless ;-)

iandol said:
But anyway, as I said above, apart from losing cached data the kernel may have to reread back and slow you down a bit, if people enjoy typing the command and feeling they've done something with this script, then that is great. Remember that placebo medicine is very good medicine, it has a measurable positive effect, and is cheap and invariably harmless ;-)
Click to expand...
Click to collapse
i think u still not even tried this
i have nothing to reply you , placebo or working , decide by users

Yes, I have because this was built-in to Engengis which I used since I first got my Ace, and actually made this command alias in my bashrc file some time ago when I first started playing with terminal:
Code:
alias flush='sync;sleep 1;echo "3" > /proc/sys/vm/drop_caches;echo "1" > proc/sys/vm/drop_caches;sleep 1;echo "==> Cache Flushed <==";'

Woeks great for me.
Sent from my GT-S5830 using xda premium

[ROM] [CM10.1] [JB 4.2] ▶Alien Droid KF2◀(Complete GUI customization) [6/28/13]

[ROM] [CM10.1] [JB 4.2] ▶Alien Droid KF2◀(Complete GUI customization) [6/28/13]
ALIEN DROID BY POWERPOINT45 AND HYPERRUNNER
50+ MODS AVAILABLE IN ALIEN SHOP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for falling asteroids. No need to wipe anything if you are coming from a JB ROM
DOWNLOAD>>>>
CURRENT BUILD:
V 2.0 6/28/13download
Mirror: http://db.tt/1YK17j4O
OLD BUILDS:
V 1.0 6/13/13download
DESCRIPTION>>>>
This ROM is made for people who love customization, It has an advanced theme chooser, battery icon changer, WiFi icon changer, and a soft key style picker. All these options will be in the app I developed called "GUI Settings". More GUI settings are to come in later builds. In addition to all that it has lots of other customizations and tweaks including Beats Audio and Sony Bravio Engine. This ROM is using twa_priv's ROM as base which already has many customization options such as clock color, soft key color, tablet/phone mode, and much more. Look below to see more features this ROM offers.
FEATURES>>>>
These are just some of the features of this ROM:
*alien shop: download free themes and mods and apply them directly from the app
*custom theme switcher app made from scratch by me (app is called GUI Settings)
*battery icon changer
*soft key changer
*WiFi icon changer
*custom boot animation (made by hyperrunner)
*add blocking
*root file manager
*some bloat removed
*added zip and zipalign binary (used by my app)
*un-needed .so files removed
THANKS>>>>
Be sure and thank Hyperrunner for helping me add features to my ROM and hosting website,
twa_priv for providing the base,
people around the internet i grabbed some graphics from,
Hyperrunner again for creating website and banner,
HashCode for his awesome work for the fire,
tobiascuypers for some icons,
this thread: http://forum.xda-developers.com/showthread.php?t=1201255,
this thread: http://forum.xda-developers.com/showthread.php?t=1413582,
this thread: http://forum.xda-developers.com/showthread.php?t=724778,
this thread: http://forum.xda-developers.com/showthread.php?t=1889522,
anyone I forgot to mention,
myself,
and Jesus for everything else.
BUGS>>>>
Check 3rd post
ENJOY

CHANGELOG
6/28/13
*HALO notifications
*widget bar compatible in tablet mode
*accelerometer now works!!! (THANKS HASHCODE)
*Brightness now works!!! (THANKS HASHCODE)
*General CM changes
*Adding new battery icon to store

RESERVED

BUGS
Only bug:
Boot animation looks odd at the start

Thanked and waiting
Sent from my SGH-I727 using Tapatalk 2

mindmajick said:
Thanked and waiting
Sent from my SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I'm going to have to rebuild ROM so it could be a while
Sent from my Amazon Kindle Fire2 using Tapatalk 2

All good. Just wanted to let you know that there is an interest
You sure it's not in the .so files you removed?
Sent from my SGH-I727 using Tapatalk 2

send me the build.prop so i can make tweaks for this rom

persano said:
send me the build.prop so i can make tweaks for this rom
Click to expand...
Click to collapse
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39E
ro.build.display.id=cm_otter2-userdebug 4.2.2 JDQ39E eng.michael.20130612.222014 test-keys
ro.build.version.incremental=eng.michael.20130612.222014
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Wed Jun 12 22:20:56 CDT 2013
ro.build.date.utc=1371093656
ro.build.type=userdebug
ro.build.user=michael
ro.build.host=michael-X101
ro.build.tags=test-keys
ro.product.model=Amazon Kindle Fire2
ro.product.brand=Android
ro.product.name=cm_otter2
ro.product.device=otter2
ro.product.board=otter2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Amazon
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=omap4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=otter2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=cm_otter2-userdebug 4.2.2 JDQ39E eng.michael.20130612.222014 test-keys
ro.build.fingerprint=Android/cm_otter2/otter2:4.2.2/JDQ39E/eng.michael.20130612.222014:userdebug/test-keys
ro.build.characteristics=tablet,nosdcard
ro.cm.device=otter2
# end build properties
ro.cwm.forbid_format = /bootloader,/xloader,/misc
#define defaults for audio D/A mic and power mode
omap.audio.mic.main=AMic0
omap.audio.mic.sub=AMic1
omap.audio.power=PingPong
af.resampler.quality=3
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
wifi.interface=wlan0
wifi.supplicant_scan_interval=120
hwui.render_dirty_regions=false
ro.opengles.version=131072
com.ti.omap_enhancement=true
omap.enhancement=true
ro.crypto.state=unencrypted
persist.sys.usb.config=mtp,adb
persist.sys.root_access=3
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.sf.lcd_density=160
persist.lab126.chargeprotect=1
ro.sf.hwrotation=270
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=2m
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130613-UNOFFICIAL-otter2
ro.modversion=10.1-20130613-UNOFFICIAL-otter2
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

powerpoint45 said:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39E
ro.build.display.id=cm_otter2-userdebug 4.2.2 JDQ39E eng.michael.20130612.222014 test-keys
ro.build.version.incremental=eng.michael.20130612.222014
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Wed Jun 12 22:20:56 CDT 2013
ro.build.date.utc=1371093656
ro.build.type=userdebug
ro.build.user=michael
ro.build.host=michael-X101
ro.build.tags=test-keys
ro.product.model=Amazon Kindle Fire2
ro.product.brand=Android
ro.product.name=cm_otter2
ro.product.device=otter2
ro.product.board=otter2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Amazon
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=omap4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=otter2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=cm_otter2-userdebug 4.2.2 JDQ39E eng.michael.20130612.222014 test-keys
ro.build.fingerprint=Android/cm_otter2/otter2:4.2.2/JDQ39E/eng.michael.20130612.222014:userdebug/test-keys
ro.build.characteristics=tablet,nosdcard
ro.cm.device=otter2
# end build properties
ro.cwm.forbid_format = /bootloader,/xloader,/misc
#define defaults for audio D/A mic and power mode
omap.audio.mic.main=AMic0
omap.audio.mic.sub=AMic1
omap.audio.power=PingPong
af.resampler.quality=3
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
wifi.interface=wlan0
wifi.supplicant_scan_interval=120
hwui.render_dirty_regions=false
ro.opengles.version=131072
com.ti.omap_enhancement=true
omap.enhancement=true
ro.crypto.state=unencrypted
persist.sys.usb.config=mtp,adb
persist.sys.root_access=3
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.sf.lcd_density=160
persist.lab126.chargeprotect=1
ro.sf.hwrotation=270
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=2m
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130613-UNOFFICIAL-otter2
ro.modversion=10.1-20130613-UNOFFICIAL-otter2
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse
i was saying the file, but is the same.
Edited: https://www.dropbox.com/s/jit2yzb3g6i1g7t/Persanos's Tweaks Alien Droid KF2.zip

persano said:
i was saying the file, but is the same.
Click to expand...
Click to collapse
Did'nt feel like uploading lol
Sent from my Amazon Kindle Fire2 using Tapatalk 2

powerpoint45 said:
Did'nt feel like uploading lol
Sent from my Amazon Kindle Fire2 using Tapatalk 2
Click to expand...
Click to collapse
see the previous post and download it.
---------- Post added at 06:43 PM ---------- Previous post was at 06:11 PM ----------
powerpoint45 said:
Did'nt feel like uploading lol
Sent from my Amazon Kindle Fire2 using Tapatalk 2
Click to expand...
Click to collapse
tell me how it works and if the battery and performance are better

persano said:
see the previous post and download it.
---------- Post added at 06:43 PM ---------- Previous post was at 06:11 PM ----------
tell me how it works and if the battery and performance are better
Click to expand...
Click to collapse
wont boot...

powerpoint45 said:
wont boot...
Click to expand...
Click to collapse
????? strange? never happened in kindle fire roms, this is cm10 or cm 10.1? did you set permission well?

persano said:
????? strange? never happened in kindle fire roms, this is cm10 or cm 10.1? did you set permission well?
Click to expand...
Click to collapse
cm10.1 I set them all to 777

powerpoint45 said:
cm10.1 I set them all to 777
Click to expand...
Click to collapse
please, read the guide in my thread. you made it bad. and it can take long to boot. zipaling (more apps, more time to boot on the first time, then no)
follow all the guide

persano said:
please, read the guide in my thread. you made it bad. and it can take long to boot. zipaling (more apps, more time to boot on the first time, then no)
follow all the guide
Click to expand...
Click to collapse
Ok I will do that later.
--------------------------------------------------------------------
Building new rom with new repos

Powerpoint, just want to say thanks for the great work for our kindle fire!

LaZzE01 said:
Powerpoint, just want to say thanks for the great work for our kindle fire!
Click to expand...
Click to collapse
No problem dude
Sent from my Amazon Kindle Fire2 using Tapatalk 2

Any chance you can set up a method of queuing theme changes? Three or more soft reboots to apply themes is a pain with having to open the app each time.
Otherwise, once the brightness and rotation issues are fixed, it's a really solid rom and I can't wait to use it daily.
Sent from my Amazon Kindle Fire2 using xda app-developers app

Can i flash international firmware for my m7vzw with s-off and unlocked bootloader?

And also can i flash international rom? thanks in advance

kyeljnk said:
And also can i flash international rom? thanks in advance
Click to expand...
Click to collapse
No, you will brick your device. International and Verizon M7s are very different. They have a different partition layout. Flashing International Rom will mix up your partitions and cause a soft brick.
Flashing the firmware could cause a serious hard brick. I don't recommend you try it :good:
Sent from my HTC One using Tapatalk

Danny201281 said:
No, you will brick your device. International and Verizon M7s are very different. They have a different partition layout. Flashing International Rom will mix up your partitions and cause a soft brick.
Flashing the firmware could cause a serious hard brick. I don't recommend you try it :good:
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
But i also read here http://forum.xda-developers.com/showpost.php?p=58883542&postcount=4 and he said that Verizon has the same partition layout as GSM
I dont need LTE anyway

kyeljnk said:
Thank you for your reply
But i also read here http://forum.xda-developers.com/showpost.php?p=58883542&postcount=4 and he said that Verizon has the same partition layout as GSM
I dont need LTE anyway
Click to expand...
Click to collapse
Well I'm not one to disagree with @alray. He's a very experienced users.
We can check the partitions on your device for peace of mind if you like.
Using a terminal emulator on the device or with adb command window. Enter the following commands to list your partitions.
Code:
adb shell
cat proc/emmc
exit
Here's how it looks on my international device.
Code:
[email protected]:/ $ export PATH=/data/local/bin:$PATH
[email protected]:/ $ adb shell
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
1|[email protected]:/ $ cat proc/emmc
dev: size erasesize name
mmcblk0p19: 000ffa00 00000200 "misc"
mmcblk0p34: 00fffe00 00000200 "recovery"
mmcblk0p33: 01000000 00000200 "boot"
mmcblk0p35: 73fffc00 00000200 "system"
mmcblk0p26: 00140200 00000200 "local"
mmcblk0p36: 27fffe00 00000200 "cache"
mmcblk0p37: 680000000 00000200 "userdata"
mmcblk0p22: 01400000 00000200 "devlog"
mmcblk0p24: 00040000 00000200 "pdata"
mmcblk0p27: 00010000 00000200 "extra"
mmcblk0p31: 04b00200 00000200 "radio"
mmcblk0p16: 03c00400 00000200 "adsp"
mmcblk0p15: 00100000 00000200 "dsps"
mmcblk0p17: 007ffa00 00000200 "radio_config"
mmcblk0p20: 00400000 00000200 "modem_st1"
mmcblk0p21: 00400000 00000200 "modem_st2"
mmcblk0p38: 01900000 00000200 "carrier"
mmcblk0p28: 00100000 00000200 "cdma_record"
mmcblk0p18: 02000000 00000200 "reserve_1"
mmcblk0p30: 034ffa00 00000200 "reserve_2"
mmcblk0p32: 05fffc00 00000200 "reserve_3"
mmcblk0p29: 06069e00 00000200 "reserve"
mmcblk0p25: 00004000 00000200 "control"
[email protected]:/ $
I guess I'm about to be schooled by @alray but better to be safe :good:
Sent from my HTC One using Tapatalk

Danny201281 said:
Well I'm not one to disagree with @alray. He's a very experienced users.
We can check the partitions on your device for peace of mind if you like.
Using a terminal emulator on the device or with adb command window. Enter the following commands to list your partitions.
Code:
adb shell
cat proc/emmc
exit
Here's how it looks on my international device.
Code:
[email protected]:/ $ export PATH=/data/local/bin:$PATH
[email protected]:/ $ adb shell
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
1|[email protected]:/ $ cat proc/emmc
dev: size erasesize name
mmcblk0p19: 000ffa00 00000200 "misc"
mmcblk0p34: 00fffe00 00000200 "recovery"
mmcblk0p33: 01000000 00000200 "boot"
mmcblk0p35: 73fffc00 00000200 "system"
mmcblk0p26: 00140200 00000200 "local"
mmcblk0p36: 27fffe00 00000200 "cache"
mmcblk0p37: 680000000 00000200 "userdata"
mmcblk0p22: 01400000 00000200 "devlog"
mmcblk0p24: 00040000 00000200 "pdata"
mmcblk0p27: 00010000 00000200 "extra"
mmcblk0p31: 04b00200 00000200 "radio"
mmcblk0p16: 03c00400 00000200 "adsp"
mmcblk0p15: 00100000 00000200 "dsps"
mmcblk0p17: 007ffa00 00000200 "radio_config"
mmcblk0p20: 00400000 00000200 "modem_st1"
mmcblk0p21: 00400000 00000200 "modem_st2"
mmcblk0p38: 01900000 00000200 "carrier"
mmcblk0p28: 00100000 00000200 "cdma_record"
mmcblk0p18: 02000000 00000200 "reserve_1"
mmcblk0p30: 034ffa00 00000200 "reserve_2"
mmcblk0p32: 05fffc00 00000200 "reserve_3"
mmcblk0p29: 06069e00 00000200 "reserve"
mmcblk0p25: 00004000 00000200 "control"
[email protected]:/ $
I guess I'm about to be schooled by @alray but better to be safe :good:
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is mine

kyeljnk said:
this is mine
Click to expand...
Click to collapse
Well I just learned something Partitions look good so as long as the conversion is handled correctly then it should be fine. I would go back to alrays post in the other thread and make sure you understand the process.
Sent from my HTC One using Tapatalk

afaik, change my MID, change my CID to superCID and find a international RUU?

Danny201281 said:
Well I just learned something Partitions look good so as long as the conversion is handled correctly then it should be fine. I would go back to alrays post in the other thread and make sure you understand the process.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
kyeljnk said:
afaik, change my MID, change my CID to superCID and find a international RUU?
Click to expand...
Click to collapse
Yep the Verizon version does have the same partition layout but if I remember correctly, the conversion did not worked correctly, the RUU flashed fine but I think he then had problem with radio.

alray said:
Yep the Verizon version does have the same partition layout but if I remember correctly, the conversion did not worked correctly, the RUU flashed fine but I think he then had problem with radio.
Click to expand...
Click to collapse
Will i lose S-off / bootloader unlocked if I run a RUU.exe? I'm willing to try to convert, but i dont want to pay some more money to get S-off and bootloader unlock
Also can you provide me a link to the latest RUU of m7ul? i'm confused which one is the latest

alray said:
Yep the Verizon version does have the same partition layout but if I remember correctly, the conversion did not worked correctly, the RUU flashed fine but I think he then had problem with radio.
Click to expand...
Click to collapse
Sounds about right. CDMA phone with GSM firmware. I did notice there was nothing confirming the conversion was successful.
But would it be possible to keep Verizon firmware but use an international rom? Not sure what the benefits of it would be but don't see why it wouldn't work.
Sent from my HTC One using Tapatalk

kyeljnk said:
Will i lose S-off / bootloader unlocked if I run a RUU.exe? I'm willing to try to convert, but i dont want to pay some more money to get S-off and bootloader unlock
Also can you provide me a link to the latest RUU of m7ul? i'm confused which one is the latest
Click to expand...
Click to collapse
The only way you can "loose" s-off is by manually typing the appropriate command, nothing else will make your phone S-ON again, same for bootloader unlock. And you'll be using a RUU.zip not .exe. The latest international version is 7.19.401.51, you can find it in the RUU collection thread at post #2 (see the sticky threads in the general section, most likely the first one in the queue. Make sure you also have a verzion RUU on your ocmputer if you need to flash back to verizon. I wouldn't expect anything good flashing a M7_UL ruu on a M7VZW but trying it shouldn't harm your phone.
---------- Post added at 08:39 AM ---------- Previous post was at 08:36 AM ----------
Danny201281 said:
Sounds about right. CDMA phone with GSM firmware. I did notice there was nothing confirming the conversion was successful.
Click to expand...
Click to collapse
Irc, he PM'ed me that it wasn't working.
Not sure what the benefits of it would be
Click to expand...
Click to collapse
I don't think there's any.

m7 gsm having a lot of roms to choice comparing with cmda (vzw now only have GPE+ version is being developed and maintained) also android M beta only released for gsm. As a flash-lover is annoy me though. My country dont even have LTE (yea i bought my m7vzw refurbished from China), and ALL Cm-based rom i tried always show only 1 bar of signal and drains a lot of battery.
Let me get this straight : the correct procedure will be : Change CID / MID , flash RUU, flash custom recovery, flash custom rom? If im correct, m7ul's radio should be different from Tmo's ? @alray

kyeljnk said:
If im correct, m7ul's radio should be different from Tmo's ? @alray
Click to expand...
Click to collapse
M7_ul uses a GSM radio.
M7_vzw uses a CDMA radio.
The firmware from an M7_ul ruu will not work with a M7_vzw radio. So I'm still certain it will not work effectively. The partitions are ok so that means you should be able to install a GSM Rom without soft brick.
I don't recommend flashing M7_ul firmware though. As alray confirms it will cause issues with your radio. :good:
Sent from my HTC One using Tapatalk

Danny201281 said:
M7_ul uses a GSM radio.
M7_vzw uses a CDMA radio.
The firmware from an M7_ul ruu will not work with a M7_vzw radio. So I'm still certain it will not work effectively. The partitions are ok so that means you should be able to install a GSM Rom without soft brick.
I don't recommend flashing M7_ul firmware though. As alray confirms it will cause issues with your radio. :good:
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
okay, thanks guys for everything Guess im stick with GPE+ then

Finally we can have 4G band 20 ( 800 mhz) !

As you know, xiaomi has released a new version of redmi note 3 pro for taiwan market, and it support the 4g band 20 ( 800mhz ), i got the idea to flash only modem, and test if i can get the band. And it's work !
I'm on MIUI V8 6.6.30 EU ( android 5.1.1 ) and i get the modem file from miui_HMNote3GlobalPro_V7.3.9.0 the special edition ported by AndersonAragao :
http://en.miui.com/thread-300096-1-1.html
But i guess that will work with original special edition modem.
HOW TO INSTALL :
Download ROM
Extract it and get NON-HLOS.bin file from firmware-update folder
Flash it with fastboot ( unlock bootloader requirt ) : fastboot flash modem NON-HLOS.bin, and Voila !
PHOTOS
Before flash modem Phone cant detect 800mhz antenna
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After Flash : he can detect it
information confirming the antenna type
DOWNLOAD :
If you want to download modem only
http://www101.zippyshare.com/v/mOEwVsrW/file.html
EDIT
I'm not 100% sure that the trick work ! So test it if you want (can) and leave a feedback.
obviously we can lose Calling after flashing modem, so thanks MadVegetable for his feedback
Solution :
get Root,then go to /system fix "build.prop" as this:
change
ro.qc.sdk.audio.fluencetype=fluence
to
ro.qc.sdk.audio.fluencetype=none

This is amazing, thank you!!!
It would be even more awesome if someone make a flashable zip...
Inviato dal mio Redmi Note 3 utilizzando Tapatalk

No [emoji27] [emoji27] [emoji27] [emoji27] [emoji27] [emoji27] [emoji27] [emoji27] really confirm?
Gesendet von meinem Redmi Note 3 mit Tapatalk

Could you explain how we should read those screenshot? How do you understand that after flash your phone can detect 800mhz band?
Inviato dal mio Redmi Note 3 utilizzando Tapatalk

Flashed it on MIUI.EU 6.5.26 . No problems so far. I am on band 3+7+20 will test it tomorrow.
Update 4-7-2016: Not working only 3G not connecting to 4g band 20. If i use my SG S4 i have 4G band 20 the RN3 with this modem does not connect.

is it possible to flash if i have xiaomi.eu rom installed (therefore TWRP)?

That test not see effective. A more effective test would disable all frequencies with QXDM and activate only the frequency 800, so the only frencuencia for 4g will be 800.
Zakariachelsea Please put two screenshots of before and after in RAW mode

After flashing this modem that you posted from zippy my SIM isn not detected anymore and my baseband version is unknown on MIUI 6.6.23 V8 MM.
I have reverted to the original modem and all is fine again.

soulaiman said:
After flashing this modem that you posted from zippy my SIM isn not detected anymore and my baseband version is unknown on MIUI 6.6.23 V8 MM.
I have reverted to the original modem and all is fine again.
Click to expand...
Click to collapse
Same for me running latest Resurrection Remix.
After flashing back to cm 13 Radios everything is working again.

Actually 7.3.9 ROM has 7.3.5 modem file. AndersonArageo ported the rom but it did not start when modem.img is in the zip file. That means you flashed 7.3.5(Android 5.1.1) img file on 6.6.30 and it works thats all. Last 2 photos places are different, just check the map carefully.

flashing the modem, will it replace the imei number?

xtribas said:
flashing the modem, will it replace the imei number?
Click to expand...
Click to collapse
it most likely won't replace imei. at least it didn't do that for me. but better backup your efs before flashing.

Zakariachelsea here I put the test that you are not at 800 mhz.
I'm not French but I searched a page that displays information for each mobile station.
In the first image you see the two towers that you show in your screenshots
http:// oi64.tinypic.com/24e98ba.jpg
Here one of the towers with frequency information.
http:// oi66.tinypic.com/2wrem8h.jpg
Here the other tower.
http:// oi68.tinypic.com/33o5pbb.jpg
There is no frequency 800 in those two towers

SirNoish said:
Zakariachelsea here I put the test that you are not at 800 mhz.
I'm not French but I searched a page that displays information for each mobile station.
In the first image you see the two towers that you show in your screenshots ..
Here one of the towers with frequency information.
Here the other tower.
There is no frequency 800 in those two towers
Click to expand...
Click to collapse
i cannot see any image

xtribas said:
i cannot see any image
Click to expand...
Click to collapse
Let's see now

I tested the modem now in my phone, i can see the 4g when i put the signal search in manual mode and i can select it, but during the speed test, the internet connection is slow. Also, i can't see the 4g icon in the signal bar. With the original modem, i can't see 4g, because in my city there is only 800mhz for TIM

SirNoish said:
Zakariachelsea here I put the test that you are not at 800 mhz.
I'm not French but I searched a page that displays information for each mobile station.
In the first image you see the two towers that you show in your screenshots
http:// oi64.tinypic.com/24e98ba.jpg
Here one of the towers with frequency information.
http:// oi66.tinypic.com/2wrem8h.jpg
Here the other tower.
http:// oi68.tinypic.com/33o5pbb.jpg
There is no frequency 800 in those two towers
Click to expand...
Click to collapse
that is FREE the operator
it doesnt have any 800mhz 4g towers. only 1800 and 2600
but the picture for our friend are from bouygue telecom who uses 800mhz 4g.
https://www.antennesmobiles.fr/ look here you can check the 4 french operators free, orange, sfr(vodafone) and bouygue telecom.
bouygue telecom where he lives
LTE 791 à 801 MHz
LTE 832 à 842 MHz
LTE 1765 à 1785 MHz
LTE 1860 à 1880 MHz
LTE 2535 à 2550 MHz
LTE 2655 à 2670 MHz
more i dont know how this towers works but voila i think 800 is for long range 2600 for close? if i remember

so is it safe to flash this? i dont want to mess the phone

now i understand what i means
he could only see the 4g tower near his house on 1800 or 2600mhz (close range 4g)
but now he can see the other tower who is farder away from his house so on 800mhz (long range frequency) okay good good !) will need to try that tommorow (dont want to brick the phone also need some more info, it's my daily phone)

reggiexp said:
that is FREE the operator
it doesnt have any 800mhz 4g towers. only 1800 and 2600
but the picture for our friend are from bouygue telecom who uses 800mhz 4g.
https://www.antennesmobiles.fr/ look here you can check the 4 french operators free, orange, sfr(vodafone) and bouygue telecom.
bouygue telecom where he lives
LTE 791 à 801 MHz
LTE 832 à 842 MHz
LTE 1765 à 1785 MHz
LTE 1860 à 1880 MHz
LTE 2535 à 2550 MHz
LTE 2655 à 2670 MHz
more i dont know how this towers works but voila i think 800 is for long range 2600 for close? if i remember
Click to expand...
Click to collapse
True, my fault sorry, I was looking the other operator. xD
Well then now confirming that the operator has 800 mhz, the only thing for sure is to disable the rest of frencuencias with QXDM.

[ROM][8.0][UNOFFICIAL] LineageOS 15.0 Test

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project and CyanogenMod with extra contributions from many people within the Android community. All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS please visit Gerrit Code Review.
What's working
Boot
Audio
Wifi
Bluetooth
Usb
What's not working
RIL
Camera
Sensors
Permissive SELinux
Lineage-15.0 is new so there will be Lineage specific bugs
Downloads
ROM - LineageOS Test
Creadit:
me
LineageOS team and all member
Kernel source
https://github.com/LineageOS/android_kernel_htc_msm8960

Going test... after feedback) Thank you, very much)

đã test
đã test m7spr:
1- Bị lỗi lúc install file zip (vui lòng xem hình)
- Lúc cài Gapps cũng bị đứng
2- Khởi động xong thì màn hình hiện lên: Process system isn't responding
3- Máy rất nóng
4- Đang dùng tự nhiên bị khởi động lại
5- ứng dụng Gallery không hoạt động
- chưa có camera
các ứng dụng hoạt động tốt:
browser
calculator
calendar
clock
contacts
Dev tools
email
files
messaging
music
phone
recorder
setting
---------- Post added at 05:31 PM ---------- Previous post was at 05:18 PM ----------
tested for m7spr:
– Error install file zip (plz see attack files)
– on screen when booted: Process system isn’t responding
– phone temperature heat up quickly (very hot)
– auto reboot frequently
– Gallery app is not working
tested done:
browser
calculator
calendar
clock
contacts
Dev tools
email
files
messaging
music
phone
recorder
setting
---------- Post added at 05:38 PM ---------- Previous post was at 05:31 PM ----------
back to LOS 14

Did not work, Startup Wizard was crashing
Just like what the title said. Left it on for around an hour and only popped up saying system processes has crashed and setup wizard has crashed.

GSM network does not work.
Automatic brightness control also does not work.

I will try tomorrow

No recent apps switch

still being worked on?

HI do you get this error while compiling it?
Error: Reading file: "/home/rickliu/android/lineage15.0/out/target/product/m7spr/obj/ETC/nonplat_seapp_contexts_intermediates/nonplat_seapp_contexts.tmp" line: 1 name: "system/sepolicy/private/seapp_contexts:neverallow" value: "(null)"

solution for lock sim
[stock-android-oreo-huawei-mate-9-project-treble]https://www.xda-developers.com/stock-android-oreo-huawei-mate-9-project-treble/[/URL]
this could help us to fix it

Has any work been done lately?
Sent from my One using Tapatalk

I can not calibrate the status of the battery. help

The Dev of this rom stopped developing for m7

hi please htc 816w lineageos 15 link download :crying:

swerff said:
Has any work been done lately?
Sent from my One using Tapatalk
Click to expand...
Click to collapse
I am working on this for the m7vzw, out of boredom, or will be over the next few days. Once I figure it out should be no prob to build for the spr variant...
To the op,
I sent you a pm, I would like to know where your actual source code is for this. It would save a lot of time if I could implement your changes to the kernel and device files, so I could spend my time fixing other stuff... Honestly, sighting the lineage kernel source does no good at all. No changes have been made to it for 15, and we have no idea what else you did to make this build work...

daavvis said:
I am working on this for the m7vzw, out of boredom, or will be over the next few days. Once I figure it out should be no prob to build for the spr variant...
To the op,
I sent you a pm, I would like to know where your actual source code is for this. It would save a lot of time if I could implement your changes to the kernel and device files, so I could spend my time fixing other stuff... Honestly, sighting the lineage kernel source does no good at all. No changes have been made to it for 15, and we have no idea what else you did to make this build work...
Click to expand...
Click to collapse
Sorry to say that but he deleted everything related to the m7 on his git account. It was there a few months ago but now its gone.

Hey there.
Any plans for the Verizon variant?
Pls do make it for that too.. People have been waiting for ages to see Oreo for it
---------- Post added at 11:32 AM ---------- Previous post was at 11:30 AM ----------
daavvis said:
I am working on this for the m7vzw, out of boredom, or will be over the next few days. Once I figure it out should be no prob to build for the spr variant...
To the op,
I sent you a pm, I would like to know where your actual source code is for this. It would save a lot of time if I could implement your changes to the kernel and device files, so I could spend my time fixing other stuff... Honestly, sighting the lineage kernel source does no good at all. No changes have been made to it for 15, and we have no idea what else you did to make this build work...
Click to expand...
Click to collapse
Will you make it for the Verizon variant too once you get the source code?
I have been waiting for Oreo since ages for the HTC one M7 Verizon

ok, so ive been busy with other stuff, and using @Flyhalf205 repos for the one max (t6) have hacked up some stuff... so far i almost have the vzw building (the device i have, once i get this one going the rest should fall into place...), after removing gps, and the camera. you can check my github at https://github.com/daavvis... its a total hack job at this point, but if i can get it to build i can go from there... ill keep you all updated...

His roms were the best.