Ok so i flashed cm ,before that i did a backup with TWRP ,i didnt like cm so i restored my LG stock backup ,but after restoring all the files ,i press reboot to system but it just keeps enetering GBoot menu,any ideas? Do i have to flash the stock .kdz again or is there a some other way?
EDIT: Did a .kdz flash and after the first reboot it got me to recovery again ,after second time - booted normally
Anyway any ideas what caused it???
Related
TMobile 6006
How do I get into recovery without being able to boot into system and the hardware recovery method doesn't work?
New to this device. Had no problem rooting, installing CWM 6028 and getting into CWM either via hardware or booting recovery from the rooted stock.
I installed [ROM][LB][UB] eXistenZ v7.0.0 and it came up great with no problems. Installed Root Explorer and TiBu w/o problem. Booted into CWM recovery from system without problem. Restored some files system data with TiBu. Rebooted and went into a boot loop where the boot animation comes up and then the phone reboots. I managed to turn the phone off by holding power and vol+. But, on reboot I can no longer into CWM recovery. I want to reflash the rom, or restore a backup either to stock or the working new rom.
I can get fastboot to recognize the phone but don't know a command to boot into recovery. I'm certain that the CWM Recovery is still valid. I just need to get into CWM one time!
HELP!
Good day, i have a f340l. And a bad update make the phone boot loop
The download mode dont works
And i try install a custom rom and restart u
In the recovery
My recovery is custom twrp
me too have D958, after restart for update system it's bootloop on recovery, even im restore nandroid backup in twrp didnt work...
-edit-
http://forum.xda-developers.com/showthread.php?t=2767439&page=2
Hey
I have got a kinda big problem. I wanted to factory reset my phone, because apps were not responding, force closing and I had a lot of apps installed (I am on B135), so I went in my TWRP 2.8.1.0 recovery and factory resetted. cache was unable to mount, so I only wiped data and rebooted. The same problem now occurs only worse.
I thought about the cache that might be causing this, but all attemts to wipe it (recovery, apps) failed.
I also thought I could flash the stock recovery again and force update the phone, but the 3 button method isnt working and (of course) I need the stock recovery
Someone please help
EdrichVerburg said:
Hey
I have got a kinda big problem. I wanted to factory reset my phone, because apps were not responding, force closing and I had a lot of apps installed (I am on B135), so I went in my TWRP 2.8.1.0 recovery and factory resetted. cache was unable to mount, so I only wiped data and rebooted. The same problem now occurs only worse.
I thought about the cache that might be causing this, but all attemts to wipe it (recovery, apps) failed.
I also thought I could flash the stock recovery again and force update the phone, but the 3 button method isnt working and (of course) I need the stock recovery
Someone please help
Click to expand...
Click to collapse
I would suggest that you install the latest twrp with flashify and then update your phone, because the newest twrp has the emui updater already built in, so you don't have to re-flash recoveries all the time.
Thanks Sproker,
One problem though. The lastest twrp does not seem to work because it is EMUI 3.0 and I am on EMUI 2.3?? I recently fixed it finally, but I still want to upgrade to EMUI 3.0... Is it worth it? And if it is, what am I to do?
Download the update.app (B135)
And extract the recovery.img
Now download ADB/Fastboot and the latest driver (HISiute).
Connect your phone with the computer and boot your phone into recovery mode.
Now boot into bootloader mode and search the device with "fastboot devices" if it is correctly connected, it should be displayed.
Now flash (first move the recovery.img into the ADB /Fastboot folder) the recovery.img you extracted before.
"fastboot flash recovery recovery.img"
Now you should have the stock recovery back on your phone.
But if twrp didn't work (erasing cache) the stock will also not work.
Try to erase cache via fastboot. But I don't know the code...
So, I've been toying around with my P20 pro - I tried a few project treble ROMS out (ofcourse had a TWRP backup before this) and then decided to restore from backup.
All was well, and I found there was an update.zip for a newer firmware that i flashed in TWRP using HuRUpdater, stupidly realising there were other files I was meant to flash. The phone is all messed up when it boots (wrong words in settings menu, etc etc) and I decide i'll be fine - i'll just go into twrp and restore from my backup again. I go into TWRP, restore from backup (EVERYTHING was backed up) and then reboot... it freezes on the huawei splash and reboots into TWRP but now TWRP won't even load!! It just sits on the splash screen - I've tried reflashing twrp - but still the same it hangs on splash screen. I can get into fastboot mode but that's about it. I can't remember what firmware I was on anyway so can't use FunkyHuawei unbrick tool..
Oh, I've tried flashing a system.img I have but it just keeps kicking me into the endless TWRP splash screen. Scared I've really messed up - got this phone about a week ago... lol.
edit: I've now got into TWRP - but my system backup is encrypted along with everything else!!
Is anyone able to provide me with the following:
A stock system.img for CLT_L29
A stock recovery.img for CLT_L29
..A SOLUTION
you can try via funkyhuawei or the dload method if you can access twrp and push the files to sdcard/dload
This thread has been resolved! I managed to restore my device by extracting the stock recovery from a ROM before flashing to my device - wiping it and then using the FunkyHuawei eRecovery method which initially didn't work for me.
Back up and running better than ever - and rooted of course.
@admin please close
Summary:
1. Flash factory image onto phone successfully
2. Install twrp and make a backup
3. Restore backup after reboot and I'm stuck in a bootloop
I have a new fi Moto x4 running Android 8.1 that I'm attempting to set up. I've reset this phone a bunch of times so here is the standards process:
1. Flash factory firmware as shown in this thread:
https://forum.xda-developers.com/moto-x4/how-to/guide-how-to-flash-official-factory-t3808348
I'm using: PAYTON_FI_OPW28.46-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
2. After flashing, start up the phone and it works fine.
3. Reboot into the bootloader and boot to twrp using: fastboot boot twrp-3.2.3-1-payton.img
4. Copy in the twrp install file using: adb push twrp-installer-payton-3.2.3-1.zip /sdcard
5. Install the zip via the twrp Install function
6. Reboot the phone into the bootloader then start recovery
7. Use the twrp Backup function to create a backup of the Boot, Data and System partitions on Internal Storage (plenty of space).
8. Reboot the phone into the bootloader then start recover
9. Use the twrp Restore function to restore the backup. Finishes fine.
10. Reboot phone to system but the load won't finish. Phone just alternates between the Android One and the Motorola splash screens. Left it for an hour at one point just to be sure. No love.
Things I have tried:
1. Using twrp via fastboot boot and a hard install
2. Making backups to the internal and external memory cards
3. Changing the partitions in the backup
4. Wiping everything except the external sim card before performing a restore
If anyone has any thoughts I would love to here them.
Thank you!
I'm having a similar problem and found this old thread. I am on stock pie rooted and made a twrp backup this morning so that I could try flashing some custom ROMs. After successfully installing a custom ROM I attempted to restore the backup and return to stock but just get bootloop. I am able to get back to to twrp and the phone will boot after a factory reset, but even if I just restore data I get bootloop. I'm wondering what I am doing wrong with restoring the backup. Any thoughts? Thanks.
I have the same problem as you are. After I finished install all applications, I made a backup with twrp-3.2.3-1-payton. Then next day I restore it from the backup, after finished backup, it goes to bootloop forever. My version is OPWS28.46.21.12, I download stock rom OPW28.46-13 but afraid to flash this rom since it is the lower version might be break the phone if not backward compatible. Then I search the web and found your message and follow this side fund a higher version of the stock rom OPWS28.46-21-14. I download it and flash it. After flashing complete and boot up, it saying new OTA update available, I don't want to update the rom since I want my phone rom version is same as the stock rom I have downloaded into my PC just in case in the future I accidentally doing something wrong I can flash back the stock rom without worrying the backward compatibility problem.
t-bob said:
I'm having a similar problem and found this old thread. I am on stock pie rooted and made a twrp backup this morning so that I could try flashing some custom ROMs. After successfully installing a custom ROM I attempted to restore the backup and return to stock but just get bootloop. I am able to get back to to twrp and the phone will boot after a factory reset, but even if I just restore data I get bootloop. I'm wondering what I am doing wrong with restoring the backup. Any thoughts? Thanks.
Click to expand...
Click to collapse
I'm a bit slow on the response - but my first thought is manually flash stock rom over your restore without wiping data
I'm able flash the latest stock rom of FI_9.0_PPWS29.69-26-4 and reinstall twrp-3.2.3-1-payton. Then I restore data only that backup from previous rom, I get bootloop again after restore the data only from TWRP. The I reflash FI_9.0_PPWS29.69-26-4 again, install twrp and root it with Magisk. Restore data from cloud google drive automatically. And this time is successfully without bootloop.