Related
I recently got my tablet back to factory default, and rooted it. I then installed Rom Manager to easily install the latest CM9 ROM for the Galaxy Tab 10.1. The installation went fine, until it restarted. I got this android character on the skateboard with a blue warp field around it, for now an hour or so.
I tried to actually reboot the tablet, and it restarted this again.
Is there a more stable version of CM9 tht I should install, ot should I stick to the latest official version 3.2 of Android from Samsung ? I don't mind re-factory-setting my tablet again, but I want something that is perhaps better than the stock Android from Samsung.
Thanks
P1 forum. ^^
Theres a forum for 10.1 tabs. But I think that you should do a WIPE. I don't have a p4(your device) soo I don't know if you can go to recovery etc.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Thanks
I actually did a full wipe as well. Since then, i found that the first line of that config file needs to be removed and it then installs fine, and starts OK. However, some apps just do not work, such as the App Store. I was back to another firmware.
samcortez said:
P1 forum. ^^
Theres a forum for 10.1 tabs. But I think that you should do a WIPE. I don't have a p4(your device) soo I don't know if you can go to recovery etc.
Click to expand...
Click to collapse
So today i downloaded and installed maclaws Cm9 rc2 for Galaxy Ace
You can find it on galaxyics
and appearently the sound is not working. I've tried to download programs that should fix it, but no.
Then i've maxed all the volumes and still no result.
And i have not dropped it on the ground or something.
Please help me, how do i fix this?
Rather try http://forum.xda-developers.com/showthread.php?t=1868121
It is much more updated.
Also wrong thread, please post in the right one next time.
did you change sound right after booting into the ROM?
These ROMs requires maxing all volumes (settings/sounds) immediately after installing the ROM for the first time.
You may need to reflash the ROM. :/
install slim jb rom
i was using CM 10.1 nightly 26-may version....everything was fine.
today i saw thr RC3 update and i flashed it and after tht when i start my whatsapp
it shows
"Note: Tablets are not supported"
any idea why this happens/happened?
any fix for this?
Try to reinstall whatsapp or go back to 26th nightly
Sent from my LG-P880
im using 28 nightly here no problem with whatsapp. nightlies and rc post 28 is screwed.
Try to reinstall whatsapp and make sure that it is possible to send and reveive short messages, because if whatsapp can't detect a 3G-modul, it thinks, you are using a tablet
tried everything
tries re installing in many ways...still no change...
nw i flashed 30/5 NIGHTLY ...and its working fine...
surprising tht an RC has a stupid bug like this
Check your IMEI
Check your IMEI. RC3 have problem that wipe your IMEI, if it it happen back to Nighty.
Q&A for [ROM][4.4][NIGHTLY] OmniROM 4.4 for GT-N7000
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Newbie needs help
Hi,
My GTn7000 is unrooted with original Samsung ROM. My phone has become so old that, the USB port is not working. This is the first time am trying to put a different ROM in this phone. Since my USB is out, i can only rely on SD card. Is it possible to accomplish new Kernal installation and New mod installation, all with just SD card support? I want to go for OMNI rom for sure, since it appears to be the best stable rom.
If the answer is yes, i will start taking back up and stuff. Please help me do this. Phone is extremely slow and lots of unnecessary apps to get rid off.
Thanks
Dewan
Yes it is possible using ext SD. Read Philz kernel. Then go for raw kernel. Then you are ready for Omni & Gapps. There is a small risk though. If the installation fails or something goes wrong somewhere and you wont have access to recovery then pretty much screwed. So keep that in mind.
sweet_rascal said:
Hi,
My GTn7000 is unrooted with original Samsung ROM. My phone has become so old that, the USB port is not working. This is the first time am trying to put a different ROM in this phone. Since my USB is out, i can only rely on SD card. Is it possible to accomplish new Kernal installation and New mod installation, all with just SD card support? I want to go for OMNI rom for sure, since it appears to be the best stable rom.
If the answer is yes, i will start taking back up and stuff. Please help me do this. Phone is extremely slow and lots of unnecessary apps to get rid off.
Thanks
Dewan
Click to expand...
Click to collapse
You must really be careful - no USB means no ODIN to flash you out of softbricks.
Install [2014.05.01][ROOT] Mobile ODIN v4.20. It may help to get you out of trouble.
I do use Omni on my N7000 supported device, It is great.
To make it easier to transfer files to your phone use [APP] Samba Server for Android. It will allow to map your phone as a network drive under Windows and use wifi for transfers.
And yes, start by flasing raw kernel. It will give you TWRP to flash Omni.
Screen does not go to sleep
ok my issue was solved i think just by flashing a new gapp.
error
Hi,
After the nightly update 4.4.4 9/11 version my galaxy note is giving unfortunately playstore has stopped working error..... klindly give a solution
---------- Post added at 06:46 PM ---------- Previous post was at 06:42 PM ----------
Hi,
My Galaxy note is giving, ''unfortunately, playstore has stopped working'' error, after the nightly update of Omnirom 4.4.4 version on 9/11/2014.. kindly suggest me a solution.. i tried uninstalling play store updates. but its still the same... please help me...
Hello to everyone,
I want to update to Omni from CM10.1.3,
please, help me with few issues.
Should I use Gapps exactly for N7000 (the link doesn't work) or I can use official for all roms?
Is it stable enough for daily use or should I find more stable rom yet?
Your help would be greatly appreciated.
omutoz said:
Hello to everyone,
I want to update to Omni from CM10.1.3,
please, help me with few issues.
Should I use Gapps exactly for N7000 (the link doesn't work) or I can use official for all roms?
Is it stable enough for daily use or should I find more stable rom yet?
Your help would be greatly appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2397942
i am using the micro modular package of gapps here.
the stability is a little questionable (because it is NIGHTLY build) but im using omnirom 4.4.4 build 2014.11.04 for N7000 because i found it the best.
a kernel
can anyone please compile a kernel for 4.4 nightlies with swap support and mac spoofing
n7000
I Flashed my Note, I need to know abt couple of things like
Wifi Direct not working which I tried Not happening through other apps too
and how to Activate USB Mass Storage
Pls Help me here
Hi,late comer here.
Can i install this rom using this latest kernel? http://forum.xda-developers.com/showthread.php?t=1901191&page=405
And another thing - what is raw kernel?
TIA
No you can't. Philz is for stock (touchwiz based) roms. You need RAW kernel for this OmniRom.
Hi,
I have a problem with the nightly. Everything worked perfectly but then my power button stopped working. This is not a hardware problem because I can start the phone with the power button when its off. The problem occurs only with booted omnirom.
Can you help me? I tried several restarts and an update to the newest nightly.
Thanks in advance.
turn off down buttons light
hello, please tell me how to turn off light on down buttons. I use Omnirom 4.4.4 on gt-n7000.Thank you!
This Rom is better than SlimSaber?
Has the Video Playback issue been fixed?
Hello XDA, I'm new here, so sorry if anything is inaccurate.
I was just wondering whether the Video Playback Issue has been fixed.
I was recommended to move to OmniRom after frequent crashes with CM (my phone couldn't last 20 hours without crashing or requiring a reboot.)
Thank you in advance.
question
Since a fiew days it is not possible to download the new versions of omni without errors?
Is there someone who can fix this?
edit: the problem was fixed sice today! thanks god!:good:
maybe modem problem.try lt4
edit:sorry wrong thread
gapps
Hi! Thanks ! I cant download the gapps -signed.zip, occured some error on mediafire link.
Empty Omnirom nighly folder
I have a Samsung Galaxy Note 10.1 n8013 and have been using the Omnirom 4.4.4 nightlies for a while now. For the last few weeks the Omnirom nightly folder is empty. Is it just me, or did things move? Is this how we're told a version is done and it's time to move on? I see there is a maintainer build for Omni 5.1.x and I'm getting the hint it's time for me to move on to it I'm guessing but I don't know.
Q&A for [NIGHTLY][ROM][4.4] CyanogenMod 11 for Samsung Galaxy S
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [NIGHTLY][ROM][4.4] CyanogenMod 11 for Samsung Galaxy S. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Memory leak?
First of all thank you very much to everybody who has been taking apart of developping this rom. It works generally really well. However my SGS has developped some sort of memory leak. During usage it starts litle by litle to loose amount of available memory and at the same time the amount of preloaded apps to memory is also shrinking(according to settings). Eventually available memory goes under 50Mb and phone slows down to unusable. Restart fixes the problem. Sotimes it works days or even a week sometime less.
This same problem aready existed with he origial rom(2.2.1). Eaven after a factory reset it only worked well a couple of hours. Updated with odin to 2.3.6 but touchwiz launcher was freesing all the time. Installed CM11 trough CM9 and formatted system and wiped caches before C11 . Everyting seems to work well but the original problem still remains. Although it now works much longer than with the original rom.
Hardware problem? Some app causing this(only apps running all the time is whatsapp and smooth calendar(according to settings))? Time to buy a new phone?
viber
my viber dont work after install gapps
how i can fix this problem ?
getting status 0 error
hi,
i have sgs 1 i9000 international version
after flashing from stock kernel/rom android 2.3.6 to Semaphore_kernel_JVT_1.8.0 for root, i've got cm 9 (cm-9.0.0-galaxysmtd.zip) with Semaphore_ICS_1.3.0. if i try to go higher cm 10-10.2 or cm 11 i get error status 0 after tyring to install from sd card the zip. tried redownloading the zip. using different version from cm site.
still using semaphore kernel with cwm tried all versions installed with odin for JB for cm10 and KK for cm 11. still i get status 0 at install.
done the wipe cache dalvik and factory reset every time before install.
usually to escape the bootloop and reboot i flash the Semaphore_ICS_1.3.0 again as my rom remains unchanged(hopefully ) after the failed installs. isn't my device compatible with cm10-11. do i need another kernel/cwm version?
CyanogenMod for samsung galaxy tab 3 7.0(SM-T211)
any one please help me to get CyanogenMod for samsung galaxy tab 3 7.0(SM-T211)
newguysgsi9000 said:
hi,
i have sgs 1 i9000 international version
after flashing from stock kernel/rom android 2.3.6 to Semaphore_kernel_JVT_1.8.0 for root, i've got cm 9 (cm-9.0.0-galaxysmtd.zip) with Semaphore_ICS_1.3.0. if i try to go higher cm 10-10.2 or cm 11 i get error status 0 after tyring to install from sd card the zip. tried redownloading the zip. using different version from cm site.
still using semaphore kernel with cwm tried all versions installed with odin for JB for cm10 and KK for cm 11. still i get status 0 at install.
done the wipe cache dalvik and factory reset every time before install.
usually to escape the bootloop and reboot i flash the Semaphore_ICS_1.3.0 again as my rom remains unchanged(hopefully ) after the failed installs. isn't my device compatible with cm10-11. do i need another kernel/cwm version?
Click to expand...
Click to collapse
So now when you have CM9, you should flash CM10.2. It is normal that it first warns, as system partition will be enlarged.
So in fact you must flash it three times and reboot. First time it will only warn of data lost due to upcoming repartition. Second time it will only update recovery to CWM 6.0.4.5. Third time it will flash ROM and after that you must reboot the device.
After being booted into the OS once, you can install CM11. Recovery versions older than CWM 6.0.4.5 or TWRP 2.6.3.1 can not flash KitKat.
tetakpatalked from Nexus 7 flo
---------- Post added at 11:30 PM ---------- Previous post was at 11:27 PM ----------
yasvi9 said:
any one please help me to get CyanogenMod for samsung galaxy tab 3 7.0(SM-T211)
Click to expand...
Click to collapse
You are in totally wrong thread here, this is for Samsung phone i9000, Galaxy S, first version.
Find threads for your Tab, they have there also much nicer ROMs than Cyanogenmod.
tetakpatalked from Nexus 7 flo
Cannot go into CW recovery mode to load Cyanogenmod
Posted in wrong thread, long night, sorry
cm12 ????
Hello guys! This is my first post here. I couldnt read all 300+ pages thats why i wanted to ask you. I read only positive comments about this rom but I can not se anyone having Bettery drain problem. I installed the ROM 2 days ago and the battery is just draining so fast. For example yesterday I took my phone off the charger at 11:00am and until 04:00pm it had 15 percent battery remaining with only little using and browsing the web for like 5-10 minutes. I can't be the only one having this problem. In the settings I see the Google play services, android system and display are having the best percentage. Please give me some answer or solution to this. I cant use my phone for just few hours a day.
Problem with virginmobile after cm11 install
My apn is set to ee carrier, instead of virginmobile and my carrier shows as orange - uk carriers btw. I know vm piggyback on ee network but when I search for carriers hardly any show up. Is this a known problem and is there a fix (modem flash or other).
Is the nightly 11 version smoother when compared to the stable 10.2.1? What are the main bugs, if any?
Is there any way to make art runtime to work? I'm using the latest nightly but it stucks in bootloop each time i select art
Problem with touch-input
I have a question concerning a bug I am experiencing. Often I am not able to make any touch-command on the right wing of the screen, about 1cm, this is especially annoying when it happens during typing. I did not experience the same bug on the original firmware, I believe. The occurence is not bound to any special app, it even happens on the Home screen.
Is this a known bug and is anyone experiencing the same? Any suggestions what causes this?
Is there a way to increase the RAM and speed up the phone?
So I installed this ROM (11-20311118-UNOFFICIAL-galaxysmtd which is one of the older versions of CyanogenMod 11) on my Samsung Galaxy S i9000, but I encountered a few issues:
- I occasionally lose the Wi-Fi connection, and although it does reconnect itself in a short time, there is a problem with some online games — when the connection is lost, the game is lost which really bothers me.
- Some of the apps that seek a lot RAM memory to be used are really slow-running, like for example Snapchat — the back camera can barely be used and the snaps need much time to open.
- The screen can be unlocked without having to slide, that can be done by only pressing the button on the left side of the home button, which is probably a minor issue.
- Sometimes the phone just bricks when I get a call and I can't answer it, which is one of the major issues.
So, I wanna know if there is a way to fix these issues and maybe a way to increase my RAM memory or get Snapchat to work smoothly. Also, I wanted to ask if some of the newer versions of CyanogenMod 11 (KitKat 4.4) or any other ROM, like Jelly Bean 4.3 or the SlimCat ROMs, can fix any of the mentioned issues. What is the best ROM for my Samsung Galaxy S i9000?
Thanks in advance!
Deleted
Why was this deleted?
tetakpatak said:
Deleted
Click to expand...
Click to collapse
I really need help with this, why would you delete it?
xtremeaptitude said:
I really need help with this, why would you delete it?
Click to expand...
Click to collapse
LOL I have deleted my own post that I wanted to write initially in the development thread (by mistake posted here)
tetakpatalked from N7100
tetakpatak said:
LOL I have deleted my own post that I wanted to write initially in the development thread (by mistake posted here)
tetakpatalked from N7100
Click to expand...
Click to collapse
Oh, ok, lol. Sorry, I'm new here. So, can anyone help me with this?
xtremeaptitude said:
Oh, ok, lol. Sorry, I'm new here. So, can anyone help me with this?
Click to expand...
Click to collapse
OK, mate.... you seem to be nice fellow, so I will try to help, answers in order of your questions:
if you have dirty flashed CM11 build (over older version without formatting /data and /system): did you try pawitp's reset of wifi settings from the bottom of the OP in CM11 thread? Otherwise also changing wifi region might help (settings/wifi/advanced)
the i9000 has indeed only total 512 MB memory, of which some 364 MB can be used normally. Well, you can increase these by flashing in recovery mode zips of Semaphore kernel for KK (3.4.3) and right after that BigMem libs for KK from Mackay KK ROM Thread. Then enable in the app "Semaphore Manager" (Play Store) BigMem option, reboot, and you will have by default 407 MB memory.
I fail to understand your last question: do you mean that the phone freezes, reboots, or "brick"? Bricking would mean that your OS fails and you have to flash ROM again or restore backup??
Good morning guys.
I use Mia ROM rooted fw 2.2.1 on my Galaxy SL i9003.
Can i flash directly this ROM on my device to update it or there are other best light ROM for my device?
Thank you
Inviato dal mio Zp 998 utilizzando Tapatalk 2