Database Develop

Legend S-OFF is out

You can find it on:
http://alpharev.nl/
HBOOT 1.0+ is NOT supported
MOD EDIT: No shouting please!

Boot from ISO and follow instructions yea? Is it safe to boot from USB?

i have 1.0

it works

Damn, why not at my device....?!
http://forum.xda-developers.com/showpost.php?p=10176241&postcount=130

aikon96 said:
Damn, why not at my device....?!
http://forum.xda-developers.com/showpost.php?p=10176241&postcount=130
Click to expand...
Click to collapse
Nand backup CM 6.1, pull the backup to your PC (just to be sure). Install a rooted stock ROM, then try.

ogo2 said:
it works
Click to expand...
Click to collapse
I can't get it to work.. can't access fastboot in step 1 tried power for several minutes..

whitetigerdk said:
I can't get it to work.. can't access fastboot in step 1 tried power for several minutes..
Click to expand...
Click to collapse
Here is the same with Hboot: 0.43.0001. its get complete freezed until I remove the battery, but its not bricked

Suppe123 said:
Here is the same with Hboot: 0.43.0001. its get complete freezed until I remove the battery, but its not bricked
Click to expand...
Click to collapse
Jeeeezz-US! You were lucky...

Ok maybe we should use this thread
Suppe123 said:
Here is the same with Hboot: 0.43.0001. its get complete freezed until I remove the battery, but its not bricked
Click to expand...
Click to collapse
Same problem, haven't been able to find a solution so far

when cell is in hboot usb plug, before turn in fastboot try to navigate with vol+ and vol - and when you see it isn't freeze, push anykey of pc and when it says turn your phone into fastboot do it.

juanporrero said:
when cell is in hboot usb plug, before turn in fastboot try to navigate with vol+ and vol - and when you see it isn't freeze, push anykey of pc and when it says turn your phone into fastboot do it.
Click to expand...
Click to collapse
Tried that, even tried going into fastboot, and back to HBOOT doesn't work either
I've got bootloader 0.43.001 I had the keep it simple froyo rom installed when trying. I'll try the keep it simple eclair rom now

JonasDroid said:
Tried that, even tried going intofastboot, and back to HBOOT doesn't work either
I've got bootloader 0.43.001 I had the keep it simple froyo rom installed when trying.
Click to expand...
Click to collapse
Same thing is here

does this mean we can now change the partitions sizes?

eclair rom didn't help either, didn't really expect it to help but it was worth the try.
Any other suggestions? looks like much off us have this problem
How did you burn the iso (the ones with the fastboot problem)?
I burned it using the build in windows image burner onto a CD. I might try a USB later on but I'll stop trying for now

i do it with azure

Threadstarter,
Can you provide us a complete steps (Tutorial)on how to S-OFF the Hboot ? I totally do not understand, as i have never flash such thing before. I'm using the rooted HTC official Froyo ROM found in xda forum

foosoomin said:
Threadstarter,
Can you provide us a complete steps (Tutorial)on how to S-OFF the Hboot ? I totally do not understand, as i have never flash such thing before. I'm using the rooted HTC official Froyo ROM found in xda forum
Click to expand...
Click to collapse
Burn the iso and boot from it. The rest of the instructions are given to you as you go
Swyped from my HTC Legend

Is it normal that you need to press the power at the right time 2ce?
I managed to get past the first by some pretty stupid method which I'm not going to make public if I'm not sure that it works (cause it's pretty risky)
But that same method doesn't work the second time in step 2/3.
Or isn't it supposed to ask for that a 2nd time?
So I had to pull my battery out in the 2nd step and it showed a message that it was unable to flash the HBoot but luckily the old was still intact.

S-OFF on first try
I used unetbootin to make a usb boot pen, then boot into tiny core, followed instructions and S-OFF

HTC Salsa Bootloader Unlocked!!

HTC has provided official tool to unlock Salsa bootloader, available at http://www.htcdev.com/bootloader/
Go to the website, sign up (if you havent done so), select Your device, Follow the instructions, and enjoy
Note : HBOOT update is required.

mate, let me know what is your RUU before doing the unlock. which part of download section did you take. Because mine, i got none. But i just continued to the fastboot oec, and simply send the code, and voila, its ***unlocked***
so i just wonder, why hboot updated is required since first, i dont get the update even i check it again and again, and second, it still can be unlocked without updating the firmware.

kanded said:
mate, let me know what is your RUU before doing the unlock. which part of download section did you take. Because mine, i got none. But i just continued to the fastboot oec, and simply send the code, and voila, its ***unlocked***
so i just wonder, why hboot updated is required since first, i dont get the update even i check it again and again, and second, it still can be unlocked without updating the firmware.
Click to expand...
Click to collapse
i didnt try it, i just posted the news...
but now i tried and couldnt update the hboot because i am on 1.12.720.3 and it says i need 1.12.720.5, i cant find the update anywhere.. so i just went on and tried the 'fastboot oem get_identifier_token' but i got a command error... i tried 'fastboot oem ?' but the command list didnt include 'get_identifier_token'
how did you do it?? which RUU are you on??

tried this, failed to update hboot, rom image error. basically im unable to update this hboot version.
this is the problem im having all round, i cannot update or revert from this chinese rom im using.
as for the fastboot, no point as i cannot get past stage one lol

why dont you try fastboot?? you might get lucky, kanded said he did it without updating... or is it that HTC is just bullsh**ing everyone bye saying it can be unlocked, but not providing the necessary updates for unlocking??

pachuau86 said:
why dont you try fastboot?? you might get lucky, kanded said he did it without updating... or is it that HTC is just bullsh**ing everyone bye saying it can be unlocked, but not providing the necessary updates for unlocking??
Click to expand...
Click to collapse
tried, i've actually just said, f*** it to it. stay with what we got till someone develops a way around it all.
it requires updating all round just to access the first part!

ic... so whats with kanded ?? how did he do it??? Seems i have to wait some more as i cant get my hands on a clip either.... bummer

pachuau86 said:
ic... so whats with kanded ?? how did he do it??? Seems i have to wait some more as i cant get my hands on a clip either.... bummer
Click to expand...
Click to collapse
don't know,
i do know u have to have all sdk parts installed as im unsure what it needs to run with, that took 2 hrs getting it all.
ive tried again, even skipping to fastboot, still nothing.
but ive already tampered with mine, already has cwm installed, s-off and rooted, with chinese uk o2 rom installed......so i wonder if he's using standard issue rom from scratch, but either way, it may not work on all salsa handsets.
but keep trying if you want. the option to send it us is still there!

man, i want to clarify.
the first time i bought this salsa, it is hTC Asia WWE, with S-ON of course.
there is no English language. fu** with it, so i tried to change into RUU O2 UK, by making my sdcard as a goldcard, and put the RUU files onto it.
Here i tell you the way, the RUU files is exe, right ? You can directly flash it as long as you got goldcard (its not hard to make it, everybody knows that)
Or, if that fail, there is still a way updating the stock rom with RUU. Install the exe, while its popping up in ur windows, open task manager, and you see RUU instalshield wizard is running, right ? now go to process, and see Aruwizard.exe
properties that aruwizard.exe, and open file location. you will see there is a zip "rom.zim"
rename that rom zip into PH11IMG.zip and put it into your sdcard that has been as a goldcard. now do the hboot, it will do the recovery itself. let me know if it works.
after that, go to htcdev, and then next step, no need to download for upgrading, bla bla bla, i got my bin_unlock by emails twice. hahaha.
get helped ? say thanks
---------- Post added at 07:18 AM ---------- Previous post was at 07:08 AM ----------
its for you bigbear, i read in any thread that you got problem with your rom right now, that you wanna go back to your stock from that chinese one rom, confirm me if im right.
you may try the way i've said above.
you know of course i also flash that custom rom you post, but i can get back to my before rom.
this is that we must be carefull. if you wanna get back to the last rom you have, you gotta do backup via recovery. there is a backup and restore section. do the backup, and save your backup (it is in clockwordmod folder) in the safest place.
lets say you wanna get back, just do the restore, and voila, you are in your home sweet home. no problemo at all altough you got big headache because of flashing the wrong rom
this is the way :
1) Format SD card as Fat32
2) Install HTC Sync Drivers. (available at htc.com)
3)Connect Your phone to PC. USB Debugging must on and usb connection type: Only Charging.)
4) Open SimpleGoldCard Tool as a admin
and follow procedure step by step at SimpleGoldcard tool.

works now, thanks to kanded and 0x.shivam.x0

BigBearEvo said:
tried this, failed to update hboot, rom image error. basically im unable to update this hboot version.
this is the problem im having all round, i cannot update or revert from this chinese rom im using.
as for the fastboot, no point as i cannot get past stage one lol
Click to expand...
Click to collapse
How did you get a custom rom running on your phone? I can't root my phone because I don't have access to the clip. Is there any other method?

By going to htcdev and getting my bootloader unlocked. From there its plain sailing
Sent from a 3.5 Sensed Salsa

Yeah i know how to do that. Got my incredible s rooted juwt like that. Rather i installed cm7 and then it got rooted. Do you have any link on hiw to proceed after unlocking the boot loader? Oh and could i have a list of roms for the salsa? Thanks in advance.
XDA FTW

jhon101 said:
Yeah i know how to do that. Got my incredible s rooted juwt like that. Rather i installed cm7 and then it got rooted. Do you have any link on hiw to proceed after unlocking the boot loader? Oh and could i have a list of roms for the salsa? Thanks in advance.
XDA FTW
Click to expand...
Click to collapse
www.wix.com/bigbearevo/salsa everything i know of is there

BigBearEvo said:
www.wix.com/bigbearevo/salsa everything i know of is there
Click to expand...
Click to collapse
Alright thanks man. Appreciated. And good stuff with the site. Lastly, would you happen to know what language should i learn to write a kernel and for a rom?
And yes i pressed the thanks button

To learn kernels and Roms its best to use Ubuntu Linux. And I found finding a Dev that could teach u what u need, I'm still learning but my Ubuntu is offline so I've not progressed any further yet.
Sent from a 3.5 Sensed Salsa

Tried it and its working fine. Thanks to BigBearEvo's site. i could easily flash a 3.5 rom

[Guide/How To] Flash Hboot's OTG

How To Flash A Different HBoot On The Go. I miss the good ol days when we could just flash an hboot on the go via the bootloader itself. Looks like this is the closest were getting for now.
Requirements:
S-Off
Terminal Emulator (Get it free from Google Play)
Commom ADB/Fastboot experience to understand this...
On the device, open Terminal Emulator
Step 1:
Run:
su
Step 2:
Run:
cd sdcard
Step 3:
Run:
dd if=/sdcard/LOCATIONOFHBOOT/HBOOT.img of=/dev/block/mmcblk0p12
Notes:
Replace "LOCATIONOFHBOOT" with the actual location it is stored on. For example, the 3 Hboots I have are stored on /sdcard/System/HBoot/
Replace "HBOOT.img" with the actual name of the hboot file. Example: enghboot.nbo or stock_hboot.img
Final example for my device would be: dd if=/sdcard/System/Hboot/hboot.img of=/dev/block/mmcblk0p12
KEEP IN MIND, ONCE YOU FLASH AND BOOT INTO THE ENG HBOOT, YOU WILL NOT BE ABLE TO BOOT BACK UP UNTIL FLASHING ANOTHER HBOOT VIA FASTBOOT.
Sent Via My HTC One, On The Now Network By Sprint!

Or you could just have an hboot.zip (hboot.nb0 and android-info.txt) and flash it from the hboot screen. ._.

Have you done it? Doesn't seem to work that way anymore unless I missed something...
Sent Via My HTC One, On The Now Network By Sprint!

Seems that every way I've seen to flash hboot involves adb. Does either mentioned method here actually work on a One?
Sent from my HTCONE using xda app-developers app

Scrufdog said:
Seems that every way I've seen to flash hboot involves adb. Does either mentioned method here actually work on a One?
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Lol I wouldn't post it if it didn't work. xD
Sent Via My HTC One, On The Now Network By Sprint!

For it to work you need to use a USB OTG cable.

@Indirect no. Lol I didn't list that anywhere in O.P. -_- I simply named the thread OTG for on the go...
Sent Via My HTC One, On The Now Network By Sprint!

Rydah805 said:
@Indirect no. Lol I didn't list that anywhere in O.P. -_- I simply named the thread OTG for on the go...
Sent Via My HTC One, On The Now Network By Sprint!
Click to expand...
Click to collapse
I was saying to flash through hboot using PN72IMG.zip's

Indirect said:
I was saying to flash through hboot using PN72IMG.zip's
Click to expand...
Click to collapse
This is what I want to do, but can't get it to work.
To be clear, on my old Evo 4G LTE, I would package the hboot or recovery into a zip file with android_info.txt, put it on my SD card, and at next boot it would find it and flash it (having s-off of course).
Now with the Sprint HTC One, I connected a USB stick via an OTG cable, verified the phone can see the drive fine while running Android normally (using Solid Explorer), placed a recovery or hboot zip on the USB drive named PN72IMG.zip, and rebooted to the bootloader, but no dice.
In the past you could see the bootloader searching for a valid file on the external card, but now the bootloader doesn't seem to do that anymore, it just starts right up in the fastboot screen, even with my OTG cable and USB drive attached.
So, have you been able to do this successfully, and if so, can you post an example file with that IMG name I could try to get recognized (I don't actually need to flash it), because maybe there is something wrong with the contents of my android_info.txt file? Can anyone think of something I am missing that prevents my quest for bootloader flashing via USB OTG from happening?

PillowMetal said:
This is what I want to do, but can't get it to work.
To be clear, on my old Evo 4G LTE, I would package the hboot or recovery into a zip file with android_info.txt, put it on my SD card, and at next boot it would find it and flash it (having s-off of course).
Now with the Sprint HTC One, I connected a USB stick via an OTG cable, verified the phone can see the drive fine while running Android normally (using Solid Explorer), placed a recovery or hboot zip on the USB drive named PN72IMG.zip, and rebooted to the bootloader, but no dice.
In the past you could see the bootloader searching for a valid file on the external card, but now the bootloader doesn't seem to do that anymore, it just starts right up in the fastboot screen, even with my OTG cable and USB drive attached.
So, have you been able to do this successfully, and if so, can you post an example file with that IMG name I could try to get recognized (I don't actually need to flash it), because maybe there is something wrong with the contents of my android_info.txt file? Can anyone think of something I am missing that prevents my quest for bootloader flashing via USB OTG from happening?
Click to expand...
Click to collapse
I haven't been able to get that to work. Maybe @Indirect knows a trick or two.
Sent Via My HTC One, On The Now Network By Sprint!

Still trying to get flashing from the bootloader to work and tried renaming files to PN72IMG.zip, PN07IMG.zip, and even PN072IMG,zip to no avail
Something I noticed though is that while in Android where my OTG connection works fine, a little light illuminates on my USB drive to show that I am getting power/data. However, when I boot into the bootloader that light is not on, indicating to me that no power/data is being supplied to the port for the USB. So no attempt is even being made to try and read it.
So my question stands if anybody has ever gotten this to work? Maybe it depends on the model of USB drive being used?

Don't know what to do next? Not that big of a problem

Ok here goes, I unlocked my phone flash viper ROM I remember it like yesterday then the new ota update came out flash the ruu to back to stock everything was fine updated the phone unlocked the phone both on win8 and win 7 but I can't flash a custom recovery, any tips are great
Sent from my GT-N8000 using xda app-developers app

Grab a copy of TWRP or CWM recoveries, links are available in original dev section. Put it in the same folder as ADB - which you used in the console/terminal/command line to unlock the phone. Fire up ADB in console, just as you did to unlock the phone, and type:
adb reboot-bootloader
Your phone should go to that white screen with colorful text. Next type:
fastboot flash recovery nameOfRecoveryImage.img
As long as you're unlocked, which you are, this should work flawlessly.

cant get phone to load
I tried to install the maximushd 12.1 on my sprint htc one. I tried to do it thru twrp recovery and now the phone only loads to boot loader. Any suggestions to get the phone back working. I was using viper rom at the time.

I'm going to assume maximushd is some rom for the international HTC One. I would highly recommend against flashing international roms for obvious reasons.
Either way, RUU the phone. If you're on the new firmware (1.31), you'll need to listen to this guy. Then download the 1.29 RUU from one of the dev sections, wherever the hell it is. Then everything will be back to how it was the day you bought it. Then, just do it all again but don't **** it up - ha.
edit: I just reread, you can't get to the recovery from the bootloader? If all you did was install an international rom, you should still be able to access recovery unless twrp has the ability to repartition, which I suppose it possible. I'll do some reading.
edit2: Others were able to fix the problem utilizing the method I outlined. One of them even links directly to the guide above. Should work alright.

sshede said:
I'm going to assume maximushd is some rom for the international HTC One. I would highly recommend against flashing international roms for obvious reasons.
Either way, RUU the phone. If you're on the new firmware (1.31), you'll need to listen to this guy. Then download the 1.29 RUU from one of the dev sections, wherever the hell it is. Then everything will be back to how it was the day you bought it. Then, just do it all again but don't **** it up - ha.
edit: I just reread, you can't get to the recovery from the bootloader? If all you did was install an international rom, you should still be able to access recovery unless twrp has the ability to repartition, which I suppose it possible. I'll do some reading.
edit2: Others were able to fix the problem utilizing the method I outlined. One of them even links directly to the guide above. Should work alright.
Click to expand...
Click to collapse
Thanks I will try not to screw it up this time
---------- Post added at 04:46 PM ---------- Previous post was at 04:31 PM ----------
sshede said:
I'm going to assume maximushd is some rom for the international HTC One. I would highly recommend against flashing international roms for obvious reasons.
Either way, RUU the phone. If you're on the new firmware (1.31), you'll need to [URL="http://forum.xda-developers.com/showthread.php?t=2390821"listen to this guy[/URL]. Then download the 1.29 RUU from one of the dev sections, wherever the hell it is. Then everything will be back to how it was the day you bought it. Then, just do it all again but don't **** it up - ha.
edit: I just reread, you can't get to the recovery from the bootloader? If all you did was install an international rom, you should still be able to access recovery unless twrp has the ability to repartition, which I suppose it possible. I'll do some reading.
edit2: Others were able to fix the problem utilizing the method I outlined. One of them even links directly to the guide above. Should work alright.
Click to expand...
Click to collapse
I cannot get into recovery. It just keeps going in a vicious cycle. I can choose fastboot or recovery but noting happens.

Did you try to flash a new one with fastboot? fastboot will work in the bootloader.

sshede said:
Did you try to flash a new one with fastboot? fastboot will work in the bootloader.
Click to expand...
Click to collapse
my computer won't recognize the phone as usb

I'll give a try when I can, thanks man
After I did ruu I still had s-off do you that make a big difference
Sent from my HTCONE using xda app-developers app

skevin101 said:
I tried to install the maximushd 12.1 on my sprint htc one. I tried to do it thru twrp recovery and now the phone only loads to boot loader. Any suggestions to get the phone back working. I was using viper rom at the time.
Click to expand...
Click to collapse
Just a quick pro-tip for you... if you didn't find the ROM in this forum (because you didn't) then DON'T FLASH IT!
If you found it in the international forums (which you did.) DON'T FLASH IT
Next time do a search because about a hundred other people who aren't good at reading before flashing have done it too.

felacio said:
Just a quick pro-tip for you... if you didn't find the ROM in this forum (because you didn't) then DON'T FLASH IT!
If you found it in the international forums (which you did.) DON'T FLASH IT
Next time do a search because about a hundred other people who aren't good at reading before flashing have done it too.
Click to expand...
Click to collapse
granted I didn't follow the instructions. that's what I get for thinking I know what im doing. just because ive flashed some before. but I didn't realize this was an international forum ( http://forum.xda-developers.com/forumdisplay.php?f=2115&nocache=1&z=3553232956118556)

sshede said:
Grab a copy of TWRP or CWM recoveries, links are available in original dev section. Put it in the same folder as ADB - which you used in the console/terminal/command line to unlock the phone. Fire up ADB in console, just as you did to unlock the phone, and type:
adb reboot-bootloader
Your phone should go to that white screen with colorful text. Next type:
fastboot flash recovery nameOfRecoveryImage.img
As long as you're unlocked, which you are, this should work flawlessly.
Click to expand...
Click to collapse
i uninstalled the drivers install them used different usb port, phone does say fastboot usb and shows up in fastboot devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found

Wanting to Unroot M8, don't have original image (1.12.651.17)

Hey everyone.
I've spent the better of the last three hours scouring the inter webs, Google, and these forums trying to find the answers to my questions - but to no avail (I've found partial answers, but I am afraid a partial answer could lead to a total brick). So anyway I apologize ahead of time if this has already been addressed somewhere else.
Here we go:
I bought one of the first Sprint HTC One M8's through Amazon. Here are the details:
Model: 831C
Android Version 4.4.2
Software Version 1.12.651.17
Unlocked but S-On (Using TWRP)
Naturally, right out of the box I rooted it. However, I did not save the original recovery image (ROM?).
--> I want to restore the phone to its original state so I can accept the OTA update and hopefully address the god-awful cell signal.
I've found a lot of stock recoveries online, but none that match 1.12.651.17.
Do I need to find that specific recovery (1.12.651.17) to flash to my phone? Will another one work (e.g. 1.54.654.13)? Or, is the recovery image specific to each phone's firmware?
I've never worried about saving my stock recovery in the past (been rooting since the HTC Evo days) but it looks like not doing so finally caught up with me.
Thanks in advance.
PS I did find something 1.12.651.17 related in the link below, but how to flash this to my phone (or whether or not it will brick) is beyond me. I've downloaded all 6 files and am waiting to figure out how the heck to get them to my phone.
http://forum.xda-developers.com/showthread.php?t=2736048

I don't know if this will help at all, but here is a link to the "Nandroid" backup downloads, courtesy of Rydah805 (thank you).
https://
drive.google.com/folderview?id=0B-_A25cR0bQFc1NxdHJkVTJsb0U&usp=sharing
(sorry can't post outside links yet)
I've downloaded all six but am not 100% how to proceed as far as flashing them to the phone via TWRP goes.
Also, not 100% if this will allow me to get back to "stock" so that I can accept the latest OTA update and (hopefully) fix my horrible connection issues.
I am usually one to do my research and then dive in, damn the torpedoes. However in this case I am thinking doing that could turn my phone into a coaster.

all you need is a stock recovery installed and you can do an ota

i was in the same boat as the OP last week. check this thread starting at my post #126 for some assistance from some members:
http://forum.xda-developers.com/showthread.php?t=2759908&page=13
instead of going back to stock to accept OTA, i went S-Off using firewater and then flashed the modified firmware located in post #18 in the same thread:
http://forum.xda-developers.com/showthread.php?t=2759908&page=2
cell signal is 100% improved, it uses 3g more than the LTE spark but it doesnt drop calls or go roaming at random now.
hope that helps.

Tbaggington said:
i was in the same boat as the OP last week. check this thread starting at my post #126 for some assistance from some members:
http://forum.xda-developers.com/showthread.php?t=2759908&page=13
instead of going back to stock to accept OTA, i went S-Off using firewater and then flashed the modified firmware located in post #18 in the same thread:
http://forum.xda-developers.com/showthread.php?t=2759908&page=2
cell signal is 100% improved, it uses 3g more than the LTE spark but it doesnt drop calls or go roaming at random now.
hope that helps.
Click to expand...
Click to collapse
Hot damn that sure does help. I've been having the same issues as you: dropped calls, roaming out of nowhere, failed call origination, etc etc. I may just go the S-Off route instead. Thank you very much for those two links … I have about 24 tabs open in my browser with different possible steps in different possible fixes.
{ParanoiA} said:
all you need is a stock recovery installed and you can do an ota
Click to expand...
Click to collapse
Right on … so any Sprint M8 stock recovery will work? I don't have to specifically get one that matches my phone's current firmware 1.12.651.17?

ecvorst said:
Hot damn that sure does help. I've been having the same issues as you: dropped calls, roaming out of nowhere, failed call origination, etc etc. I may just go the S-Off route instead. Thank you very much for those two links … I have about 24 tabs open in my browser with different possible steps in different possible fixes.
Right on … so any Sprint M8 stock recovery will work? I don't have to specifically get one that matches my phone's current firmware 1.12.651.17?
Click to expand...
Click to collapse
in one of the posts, Magnum Enforcer directed me to a link in his sig. that was key in getting me across the finish line. his post cleared away so much fog in my brain so big thanks to him.
cant help on the stock recovery question, it was too confusing to me so i went the other direction!

He's referring to the second link in my sig. There is a section in the guide regarding firmware updates. Towards the bottom of the first post is also a link to Captain Throwback's firmware thread. No need to go through the hassle of returning to stock to take the OTA if all you want to do is update your firmware. You have to be S-off to update your firmware.

Tbaggington said:
in one of the posts, Magnum Enforcer directed me to a link in his sig. that was key in getting me across the finish line. his post cleared away so much fog in my brain so big thanks to him.
cant help on the stock recovery question, it was too confusing to me so i went the other direction!
Click to expand...
Click to collapse
Magnum_Enforcer said:
He's referring to the second link in my sig. There is a section in the guide regarding firmware updates. Towards the bottom of the first post is also a link to Captain Throwback's firmware thread. No need to go through the hassle of returning to stock to take the OTA if all you want to do is update your firmware. You have to be S-off to update your firmware.
Click to expand...
Click to collapse
Outstanding!
So basically to get my phone "up to date" (and equivalent to taking the most recent OTA update), I simply flash the firmware of my choice to my phone. The trick is to be S-off first.
Then, instead of worrying about OTAs I can just flash the latest firmware whenever it becomes available?
Thanks for bearing with me and for all the great info!

ecvorst said:
Outstanding!
So basically to get my phone "up to date" (and equivalent to taking the most recent OTA update), I simply flash the firmware of my choice to my phone. The trick is to be S-off first.
Then, instead of worrying about OTAs I can just flash the latest firmware whenever it becomes available?
Thanks for bearing with me and for all the great info!
Click to expand...
Click to collapse
That's correct:thumbup:
Sent from my HTC device

Magnum_Enforcer said:
That's correct:thumbup:
Sent from my HTC device
Click to expand...
Click to collapse
Sweet. Thanks man.
Well I'm installing firewater as we speak and I am on the last step after having accepting the terms (including not to taunt firewater). It's hanging up at the "……." part. Not sure if I should hold the power button, start all over, or just panic.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Magnum_Enforcer said:
That's correct:thumbup:
Sent from my HTC device
Click to expand...
Click to collapse
By the way, I'm reading your guide right now (http://forum.xda-developers.com/showthread.php?p=51516247#post51516247)… awesome work and very helpful, thank you!

Well just an update:
I have tried the firewater method 6 times now and I keep getting stuck at the same screen I attached on the last page of this thread. I've let this sit for as little as 5 minutes and as long as 30 minutes. Holding the power button for 60 seconds doesn't do anything (unless this prompt means I am supposed to restart the phone).
I'm wondering if the fact that I'm stuck at "………" instead of even getting to the "opening bottles" part means one of the following:
I have a conflict somewhere on the phone or my computer.
or
firewater doesn't work with my Sprint HTC M8
I'll keep digging around to see what I can find.
That notwithstanding, I may have to go back to Plan A and see if I can't get this thing unrooted so I can at least get the OTA and fix the #1 issue: horrible cell reception.
Thanks again for all the helpful input!

Another update … I used #firewater on andirc and the response from beaups was el-quicko. It turns out I was trying to install a version of firewater that wasn't the most recent.
So anyway I guess that's good information for anyone who runs into a similar problem in the future:
Make sure you're trying to install the most recent version of firewater! lol

Interesting developments …
Firewater was a success and I also was successful in downloading the latest firmware to my Mac. I had to select all the files in the folder (it didn't download as a zip) and create a zip file while also naming it the correct name.
Everything went fine as far as sending it to my SD card and using HBOOT method to install. The install went perfectly and I rebooted the phone, but when checking under the About>Software Version on my phone it is still showing Software Version 1.12.651.17 …
Any thoughts?
Thanks.

Software & firmware are different from one another. Flash a different ROM to change the software version.
Sent from my HTC device

I just read a helpful FAQ http://themikmik.com/showthread.php...1-54-651-8-OTA&p=299474&viewfull=1#post299474
Looks like the firmware updates but not the software version.
I'm guessing the same happens whenever someone takes an OTA?

ecvorst said:
I just read a helpful FAQ http://themikmik.com/showthread.php...1-54-651-8-OTA&p=299474&viewfull=1#post299474
Looks like the firmware updates but not the software version.
I'm guessing the same happens whenever someone takes an OTA?
Click to expand...
Click to collapse
If you take a OTA both software & firmware get updated.
Sent from my HTC device

Magnum_Enforcer said:
Software & firmware are different from one another. Flash a different ROM to change the software version.
Sent from my HTC device
Click to expand...
Click to collapse
Thank you Magnum! I just came across the FAQ right after your post. So I guess I should go ahead and flash a new ROM just to make the process complete.
Thanks again for the help - I'm sure I've already mentioned this, but your guide was extremely useful. In the past (original Evo 4g) I've always simply rooted my device and that was it; however, now I'm finally dabbling in the S-Off territory. Sounds like you can do a lot more that way.

ecvorst said:
Thank you Magnum! I just came across the FAQ right after your post. So I guess I should go ahead and flash a new ROM just to make the process complete.
Thanks again for the help - I'm sure I've already mentioned this, but your guide was extremely useful. In the past (original Evo 4g) I've always simply rooted my device and that was it; however, now I'm finally dabbling in the S-Off territory. Sounds like you can do a lot more that way.
Click to expand...
Click to collapse
Glad to help:thumbup:
S-off is definitely the way to go. I've had S-off on every HTC device I've ever owned and it's worth the extra effort to obtain it.
Sent from my HTC device

Magnum_Enforcer said:
Glad to help:thumbup:
S-off is definitely the way to go. I've had S-off on every HTC device I've ever owned and it's worth the extra effort to obtain it.
Sent from my HTC device
Click to expand...
Click to collapse
For sure!
I'm guessing there is really no reason to update my software (that's the RUU stuff, right?) As long as the firmware has been updated, I should hopefully see some improvements to my radio/cell signal.