Database Develop

[ROM][DISCONTINUED]!!PureBlur v1.2-based on the latest HKTW 2.3.4 official update!!

This is my first ROM!
WORKING NOW!!
DO NOT download the ROM UNLESS you know what you are doing!
I am not responsible for any bricked!!
Screenshot gone! (just stock blur UI)
Features:
Brightness hacking down to 5
64M vm heap size
Webtop via HDMI (Thanks zomgno1)
Zipaligned
Deodexed
Rooted
4 points multi-touch with 15 seconds crack
EXT4
faux123's kernel [email protected]
Click to expand...
Click to collapse
Installation guide:
1. press Vol-down while booting and navigate to "Android recovery" Press Vol-up for going into Clockworkmod Recovery (Custom CWM-based Recovery 5.0.2.3-atrix4.1 recommended)
2. BACKUP FIRST!!!
3. Wipe data/factory reset
4. Wipe cache
5. Wipe dalvik cache
6. install the ROM
7. Reboot to enjoy the overclocked Blur!
Click to expand...
Click to collapse
Changelog:
Next update:
---
v1.2
Brightness hacking down to 5
64M vm heap size
Webtop via HDMI
Download update v1.2
v1.1.1
Removed Carrier name from status bar
1% battery mod
Download update v1.1.1
v1.1
Delete DSP manager
Add EXT4 support
multi-touch hack with 15 seconds crack
v1.0
Initial release
Click to expand...
Click to collapse
Known issue(s):
Click to expand...
Click to collapse
Thanks to faux123, Diviance, zomgno1(HDMI hack) and also Motorola
Click to expand...
Click to collapse
For those who suffer from widget problem, please install the stock kernel. Since I don't know if your device compatible with HK stock kernel.
DOWNLOAD (v1.1)
DOWNLOAD WEBTOP

I was about to download the original sbf and deodex it.
You save my time.
Many thanks
Sent from my MB860 using XDA App

Any other goodies you can list?
Special install instructions?
Sent from my MB860 using xda premium

supermerkin said:
Any other goodies you can list?
Special install instructions?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
HKTW got special settings for crystal talk

does your rom suffers from the missing widgets problem every time you shut down and boot up again? i am asking because i tried already homebase and aura which have faux's kernel and both have the same problem... CM7 beta has a kernel that does not have this problem...

So I dl and flashed using the instructions you posted.
I originally had blue cronic installed and it seems like most of the ui from it was still running after reboot. Also all of the apps had a fc issue going on so I had to restore. Should I have to flash back to stock before flashing your rom?
Sent from my MB860 using xda premium

totti123456 said:
does your rom suffers from the missing widgets problem every time you shut down and boot up again? i am asking because i tried already homebase and aura which have faux's kernel and both have the same problem... CM7 beta has a kernel that does not have this problem...
Click to expand...
Click to collapse
I would assume so. The missing widgets problem appears to be linked to faux's kernel, which this has. In faux's thread even people on CM7 that use his kernel experience the widget problem.

supermerkin said:
So I dl and flashed using the instructions you posted.
I originally had blue cronic installed and it seems like most of the ui from it was still running after reboot. Also all of the apps had a fc issue going on so I had to restore. Should I have to flash back to stock before flashing your rom?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
It is no necessary to back to stock.
I had CM7 before. After Wipe data, cache, then install, no problem at all.

Lol did you remove the download link?

I'll try it again. Maybe I'll do a restore shook the way back to after I unlocked and rooted before flashing and see what happens.
Sent from my MB860 using xda premium

So I restored back to stock and cleared/reset everything but still unlocked and reinstalled.
Out got stuck on the dual core boot loader over and over. Pulled the battery and restored again.
What it looked like was happening when I installed was an update and not a full rom? I downloaded the files you had posted, was it the right one at 7:00am this morning est?
Sent from my MB860 using xda premium

supermerkin said:
So I restored back to stock and cleared/reset everything but still unlocked and reinstalled.
Out got stuck on the dual core boot loader over and over. Pulled the battery and restored again.
What it looked like was happening when I installed was an update and not a full rom? I downloaded the files you had posted, was it the right one at 7:00am this morning est?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
So, this is the reason I removed the ROM and now I'm try to make it OK
SORRY!

This rom is probably for ME860
ME860 is china version of Atrix international,
Atrix international should be safe to use,
but not yet confirmed for Atrix 4G (ATT Atrix)

alistair3149 said:
This rom is probably for ME860
ME860 is china version of Atrix international,
Atrix international should be safe to use,
but not yet confirmed for Atrix 4G (ATT Atrix)
Click to expand...
Click to collapse
This is my mistake. I need to figure out why it will stuck on boot.
Sorry for my mistake!!
I will upload the ROM when everything OK.

No worries, at least I'm not bricked. Just post the update and I'll try it again later.
Sent from my MB860 using xda premium

nok07635 said:
This is my mistake. I need to figure out why it will stuck on boot.
Sorry for my mistake!!
I will upload the ROM when everything OK.
Click to expand...
Click to collapse
It is not your fault,
this rom is for ME860,
but Atrix international should be okay

can you release a version with stock kernel? i dont need to overclock, just want a stable deodexed custom rom... thanks!

Boot up success but I am using AURA ROM developer Diviance's updater-script. I must ask his permission to release!
BTW I try to reboot the phone to see if the widgets missing. Honestly, No problem with BlurHome launcher

The widget problem seems to occur at a random time. It took a few days worth of rebooting to happen to me on homebase. After it happened the only permanent fix was to revert to stock kernel.
Sent from my MB860 using Tapatalk

hi.İ want to ask:
which languages are supported your rom?

[Q] i cant install xperia active launcher:(

whenever i install the .apk file, the installer says "application not installed". i've tried files of xperia active launcher and still no good, help please?

what rom are you using?

Firstly ur rom should be 2.3
2-Dis also happened to me so what i did was re-install rom
3- check non-market apps and then install
WORKED FOR ME Best Of Luck

TarunDham said:
Firstly ur rom should be 2.3
2-Dis also happened to me so what i did was re-install rom
3- check non-market apps and then install
WORKED FOR ME Best Of Luck
Click to expand...
Click to collapse
Hmm, not necessary has to be Gingerbread... some versions of the launcher works in 2.1 and 2.2 (with fc's adding folders)

Copy the apk to system->app and set permission :
**+
*++
*++
*=check
+=uncheck
Sent from my E15i using XDA Premium App

im using gingerdx v017

dotsen9 said:
Copy the apk to system->app and set permission :
**+
*++
*++
*=check
+=uncheck
Sent from my E15i using XDA Premium App
Click to expand...
Click to collapse
i've tried that already, after i checked the permissions, i rebooted the phone, still no good, its really weird :|

TarunDham said:
Firstly ur rom should be 2.3
2-Dis also happened to me so what i did was re-install rom
3- check non-market apps and then install
WORKED FOR ME Best Of Luck
Click to expand...
Click to collapse
i have also tried this, still, it wont work, im just stuck with launcher pro

Hai,
This happen to me in a while.. You should try fullwipe and reflash the rom again,
DO NOT FULLWIPE AFTER FLASHING -- it might happen just bcause of the wipping.. I found few bugs after wipping GDX regarding apk instalation but maybe its just me
Anyway GingerXperia and Gingercruzt has build in active launcher on them...
Best of luck

Anon8989 said:
Hai,
This happen to me in a while.. You should try fullwipe and reflash the rom again,
DO NOT FULLWIPE AFTER FLASHING -- it might happen just bcause of the wipping.. I found few bugs after wipping GDX regarding apk instalation but maybe its just me
Anyway GingerXperia and Gingercruzt has build in active launcher on them...
Best of luck
Click to expand...
Click to collapse
i tried to flash the rom again without full wipe and it worked , now my new problem is the dualtouch add-on, i've flashed it, but it wont work, lol, anyways thanks

You are full of problems)),hmm,u need to remove the module for synaptics if you have
Cypress and viceverse.
Sent from my E15 using XDA Premium App

Uninstall any other xperia home launcher.. if you have.
Sent from my X8 using XDA App

Or use "Home switcher"

Boot loop when I try install IZS

I was on Mackay rom and before that I was on IZS. But when I tried to flash IZS I got stuck in a boot loop, the phone just hangs on the LG logo and is unresponsive. Can anyone tell me what I can do to fix it?
Sent from my LG-P970 using xda app-developers app

Which version you installed? You need to install the version 0 first before flashing the update packages
Sent from my Nexus 4 using xda premium

and also check if the file download was complete!

Sv: Boot loop when I try install IZS
Zaihanzainal said:
Which version you installed? You need to install the version 0 first before flashing the update packages
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
If you did a full wipe this is yor solution
Cheers
Daniel

theaks30 said:
and also check if the file download was complete!
Click to expand...
Click to collapse
I use the same version 0 file I had used the first time to install it. The firt time I installed I did v0 and then v0.1 and later v0.2 and then v0.4. Then I decided to try Mackay as I really want Jelly Bean, but the stability, battery life and camera on IZS is just great and that's why I wanted to go back.
Anyway, so my phone got stuck in a bootloop and the only way I could recover it was to use smart flash and flash my old v20e, then I did a full wipe and then tried IZS but got same boot loop. I then did the whole process again with smartflash and v20e and tried JellyBam v4 and Mackay version 2.6.3 and they worked fine. So not sure IZS won't work. Mackay is def not the worst rom to be stuck on, in fact if it had a better camera and not the sd card issues of cm10.1 then it would be just as good in my opinion.
So any ideas? Thanks in advance

Sv: Boot loop when I try install IZS
Try to use pre-izs package
Cheers
Daniel

As RomWiz said if you use Smartflash anyway use the PRE_IZS_IMAGE (do it like Huexxx explaind in 'case C') and next time you might know why it sometimes is very good to have a nandroid. If you had done that as you still where on IZS before you tryed Mackay you probably could have restored that nandroid much easyer.

SaschaKH said:
As RomWiz said if you use Smartflash anyway use the PRE_IZS_IMAGE (do it like Huexxx explaind in 'case C') and next time you might know why it sometimes is very good to have a nandroid. If you had done that as you still where on IZS before you tryed Mackay you probably could have restored that nandroid much easyer.
Click to expand...
Click to collapse
Thanks, I will try the PRE IZS image. The funny thing is I did make a nandroid backup before changing to Mackay, but when I tried to restore it, the MD5sum didn't match for some reason. Any idea why that would be?
Anyway thanks guys you have been super helpful and friendly too

OneBadPig said:
Thanks, I will try the PRE IZS image. The funny thing is I did make a nandroid backup before changing to Mackay, but when I tried to restore it, the MD5sum didn't match for some reason. Any idea why that would be?
Click to expand...
Click to collapse
It can happen if you rename the nandroid. The name is part of the MD5sum and some programs that help you with reorg your backups should change that, but I had it already that they mess up. Or some backups are dammaged anyway. If you make the backup in CWM directly the changes that it's not OK are slimmer as when you make it with the online nandroid backup app, but both happend to me already. I think in some CWM you can turn the MD5 check off.
I tend to make a backup nearly every week, so if one is bad it might not be so bad. I copy the backups every 3-4 weeks to my PC that I can delete the older ones on my SD card and after 3-4 month I delete them on my PC. Hey hey I make more backups on my phone than on my PC. :laugh:

Good idea, I think that is a great plan. Thanks
Sent from my LG-P970 using xda app-developers app

OneBadPig said:
Good idea, I think that is a great plan. Thanks
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Just to let you know I did option C as Huexxx says, using the PRE IZS and smart flash, but still got same boot loop. Weird that it didn't work hey. Anyway I suppose I will just have to hope that Mackay can improve the camera. Thanks again for your help:fingers-crossed:

I just saw that if you downgrade Zeus 7.06 to 7.0 you need to flash a boot loop fixer Heuxxx's site. Could that Bea similar problem for me coming from 4.2.2 Mackay ROM back to IZS
Sent from my LG-P970 using xda app-developers app

AW: Boot loop when I try install IZS
OneBadPig said:
I just saw that if you downgrade Zeus 7.06 to 7.0 you need to flash a boot loop fixer Heuxxx's site. Could that Bea similar problem for me coming from 4.2.2 Mackay ROM back to IZS
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Just flash a stock v20, do a factory reset from hidden menu and it should work out just fine then try to flash izs again.
Sent from my LG-P970 using xda app-developers app

[Q] Touch screen problem on CM 10.1

Hi all. I use CM 10.1.3 by Mardon for ace cooper. When i install a couple of mods from recovery after few reboots the screen automatically shows and functions only via a small circle displayed when touched. To select an app, i first have to drag the circle to that app and tap to select it. I have to reflash the rom to restore normal functioning.
Any suggestion??

ankkz said:
Hi all. I use CM 10.1.3 by Mardon for ace cooper. When i install a couple of mods from recovery after few reboots the screen automatically shows and functions only via a small circle displayed when touched. To select an app, i first have to drag the circle to that app and tap to select it. I have to reflash the rom to restore normal functioning.
Any suggestion??
Click to expand...
Click to collapse
Maybe Halo.apk? but AFAIK Mardons built hasn't got it :S
Did you look for in settings >>> development settings?
The fast solution:
Flash the rom again and don't flash strange mods xDDD

Viper The Ripper said:
Maybe Halo.apk? but AFAIK Mardons built hasn't got it :S
Did you look for in settings >>> development settings?
The fast solution:
Flash the rom again and don't flash strange mods xDDD
Click to expand...
Click to collapse
I could'nt find any settings for this..not even in development settings. It's more like a pen view like on Note2.. a circle follows and selects the app on which circle is positioned, but since ace does not have any pen i have to drag the circle..
And i don't really flash strange mods, only ones which are used, reviewed and recommended.. and this happens after every few mods (not the same ones)..

ankkz said:
Hi all. I use CM 10.1.3 by Mardon for ace cooper. When i install a couple of mods from recovery after few reboots the screen automatically shows and functions only via a small circle displayed when touched. To select an app, i first have to drag the circle to that app and tap to select it. I have to reflash the rom to restore normal functioning.
Any suggestion??
Click to expand...
Click to collapse
Try this..go to Developer Settings>>Uncheck 'Show Touches' option..

nix01 said:
Try this..go to Developer Settings>>Uncheck 'Show Touches' option..
Click to expand...
Click to collapse
Doesn't work..it is already unchecked

ankkz said:
Doesn't work..it is already unchecked
Click to expand...
Click to collapse
Reflash the rom and forget

Viper The Ripper said:
Reflash the rom and forget
Click to expand...
Click to collapse
That seems to be the only solution atm..
Anyways..let me know if someone finds a solution..

ankkz said:
That seems to be the only solution atm..
Anyways..let me know if someone finds a solution..
Click to expand...
Click to collapse
I would also be interested. I got this weird bug after flashing a script.
I just wonder why no one knows something about this bug/function, I mean for what did they developed this?
Sent from my GT-S5830 using xda app-developers app

ankkz said:
Hi all. I use CM 10.1.3 by Mardon for ace cooper. When i install a couple of mods from recovery after few reboots the screen automatically shows and functions only via a small circle displayed when touched. To select an app, i first have to drag the circle to that app and tap to select it. I have to reflash the rom to restore normal functioning.
Any suggestion??
Click to expand...
Click to collapse
try disabling force gpu rendering and screen updates

aditya rathee said:
try disabling force gpu rendering and screen updates
Click to expand...
Click to collapse
Never enabled it

Blackbox421 said:
I would also be interested. I got this weird bug after flashing a script.
I just wonder why no one knows something about this bug/function, I mean for what did they developed this?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Good to know I am not the only one

Blackbox421 said:
I would also be interested. I got this weird bug after flashing a script.
I just wonder why no one knows something about this bug/function, I mean for what did they developed this?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Which script did you use? It'd be really useful to know it to stay away form this script

Viper The Ripper said:
Which script did you use? It'd be really useful to know it to stay away form this script
Click to expand...
Click to collapse
Actually I used Fly-On mod. But it happens only once. I don't know anymore which version it was.. I installed Fly-On mod again now on another rom without problems..
Sent from my GT-S5830 using xda app-developers app

Sorry doublepost
Sent from my GT-S5830 using xda app-developers app[/QUOTE]
Sent from my GT-S5830 using xda app-developers app

It is not specific to fly on. It happened with me on “★ [MOD ] ◢ PurePerformances ™ X ◣ | SirI
Edition | Scary performances on your Ace" also.
The first installation is fine..the problem is with third or fourth flash..be it update or uninstaller. I guess the problem showed up when I flashed PX Recovery 0.4.0 or updates for MA6 KERNEL..
I strongly feel its some problem with device booting from recovery or script installation..

ankkz said:
It is not specific to fly on. It happened with me on “★ [MOD ] ◢ PurePerformances ™ X ◣ | SirI
Edition | Scary performances on your Ace" also.
The first installation is fine..the problem is with third or fourth flash..be it update or uninstaller. I guess the problem showed up when I flashed PX Recovery 0.4.0 or updates for MA6 KERNEL..
I strongly feel its some problem with device booting from recovery or script installation..
Click to expand...
Click to collapse
yea but after a reboot the circle stays and dont dissapear so i think its a problem with a script
Sent from my GT-S5830 using xda app-developers app

Blackbox421 said:
yea but after a reboot the circle stays and dont dissapear so i think its a problem with a script
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I hope you are not mistaking the cicle with boot animation circle..its one like in air view with a touch pen enabled..
The touch screen works but only via draging the circle around..
Also the circle does not stay on the screen, it appears when i touch it, then disappears after 3-4secs.

ankkz said:
I hope you are not mistaking the cicle with boot animation circle..its one like in air view with a touch pen enabled..
The touch screen works but only via draging the circle around..
Also the circle does not stay on the screen, it appears when i touch it, then disappears after 3-4secs.
Click to expand...
Click to collapse
I know what you mean man, I got the same bug before. We're talking about the same thing
Sent from my GT-S5830 using xda app-developers app

Hey guys....
a very old post... but im facing the same problem...
any solution?

I used Fly-On mod on Mardon's CM10.1 and I've never had that problem. Also I'm using that mod right now on CM7.2 and also no problems at all. Wipe all and re-flash the rom, I think it's the only way to fix this problem.

Spice Coolpad 2

My phone is stuck at "S" sceen. Help

Gaurav_007 said:
My Mi 496 is stuck at S screen one booting please some on help me ( i deleted the coolpad launcher using titanium backup as it didn't had the option to freeze)
What does the first option does ? I pressed it accidently while rooting phone (when i was trying to open the back to remove battery)
Click to expand...
Click to collapse
Is it started just after remove launcher? Or via rooting process? How you rooted your phone?
Sent from my Spice Mi-496 using xda app-developers app

hdp9star said:
Is it started just after remove launcher? Or via rooting process? How you rooted your phone?
Sent from my Spice Mi-496 using xda app-developers app
Click to expand...
Click to collapse
I rooted using the guide here:http://forum.xda-developers.com/showthread.php?t=2532192&nocache=1
I don't how what caused it (Which launcher do you have installed?) I had 2 launchers installed (I know that no launcher results in bootloop) but not of them were selected as default launcher
I got this error when i power off the phone
Before getting this error I saw a blue loading bar(like loading in froyo) with text :cleaning
I just formated the data & cache partition & now the phone is booting up
every user app + coolpad launcher is removed
but i cannot sign in which means i can't install a launcher

i cant post to http://forum.xda-developers.com/showthread.php?t=2532192&nocache=1 since i have less than 10 posts

Gaurav_007 said:
I rooted using the guide here:http://forum.xda-developers.com/showthread.php?t=2532192&nocache=1
I don't how what caused it (Which launcher do you have installed?) I had 2 launchers installed (I know that no launcher results in bootloop) but not of them were selected as default launcher
I got this error when i power off the phone
Before getting this error I saw a blue loading bar(like loading in froyo) with text :cleaning
I just formated the data & cache partition & now the phone is booting up
every user app + coolpad launcher is removed
but i cannot sign in which means i can't install a launcher
Click to expand...
Click to collapse
It seems like, you need to flashed a new ROM, as you already deleted data from your coolpad. There is nothing to backed up , I guess. Please followed this thread:
http://forum.xda-developers.com/showthread.php?p=47793621#post47793621
I successfully flashed it.
good luck
Sent from my Spice Mi-496 using xda app-developers app

hdp9star said:
It seems like, you need to flashed a new ROM, as you already deleted data from your coolpad. There is nothing to backed up , I guess. Please followed this thread:
http://forum.xda-developers.com/showthread.php?p=47793621#post47793621
I successfully flashed it.
good luck
Click to expand...
Click to collapse
data means user data - Its like when you open the phone for 1st time.
I signed in my phone using a different account & installed apex launcher.
My phone is rooted too

Gaurav_007 said:
data means user data - Its like when you open the phone for 1st time.
I signed in my phone using a different account & installed apex launcher.
My phone is rooted too
Click to expand...
Click to collapse
It is factory restore right? I believe language was the problem and by mistake, it erase something else.
So what's your status now? Is it boot able? If not then I would flashed a ROM.
Sent from my Spice Mi-496 using xda app-developers app

hdp9star said:
It is factory restore right? I believe language was the problem and by mistake, it erase something else.
So what's your status now? Is it boot able? If not then I would flashed a ROM.
Sent from my Spice Mi-496 using xda app-developers app
Click to expand...
Click to collapse
I'm able to boot, and have installed apex & moved it to system using titanium backup & removed some bloatware too

Gaurav_007 said:
I'm able to boot, and have installed apex & moved it to system using titanium backup & removed some bloatware too
Click to expand...
Click to collapse
So what is problem you have with phone? You said you stuck at "S"
Sent from my Spice Mi-496 using xda app-developers app

hdp9star said:
So what is problem you have with phone? You said you stuck at "S"
Sent from my Spice Mi-496 using xda app-developers app
Click to expand...
Click to collapse
Problem is solved (I did that by formatting cache & data)

Gaurav_007 said:
Problem is solved (I did that by formatting cache & data)
Click to expand...
Click to collapse
PS: I have attached the image of S too the problem which is fixed

Can you please tell what is the function of round rectangle at the top of phone ?(See Picture)

Gaurav_007 said:
Can you please tell what is the function of round rectangle at the top of phone ?(See Picture)
Click to expand...
Click to collapse
It is a proximity sensor .

Cleaning Up Resources Error
I flashed version 8 ROM . But I am still getting cleaning up resources sometimes . How can i get rid of this
Gaurav_007 said:
I rooted using the guide here:http://forum.xda-developers.com/showthread.php?t=2532192&nocache=1
I don't how what caused it (Which launcher do you have installed?) I had 2 launchers installed (I know that no launcher results in bootloop) but not of them were selected as default launcher
I got this error when i power off the phone
Before getting this error I saw a blue loading bar(like loading in froyo) with text :cleaning
I just formated the data & cache partition & now the phone is booting up
every user app + coolpad launcher is removed
but i cannot sign in which means i can't install a launcher
Click to expand...
Click to collapse

somaniab said:
I flashed version 8 ROM . But I am still getting cleaning up resources sometimes . How can i get rid of this
Click to expand...
Click to collapse
Why do you want to flash v8, as version 9 is already made by free radical
Sent from my Spice Mi-496 using xda app-developers app

somaniab said:
I flashed version 8 ROM . But I am still getting cleaning up resources sometimes . How can i get rid of this
Click to expand...
Click to collapse
Cleaning up resources appears in my case when I use GameKiller on Dr. Driving, but as long your device doesn't get stuck in bootscreen, you are fine

I flashed version 9 also . My phone starts hanging and stuck at Spice Logo . so i changed it again to version 8
hdp9star said:
Why do you want to flash v8, as version 9 is already made by free radical
Sent from my Spice Mi-496 using xda app-developers app
Click to expand...
Click to collapse

Hey can anyone provide me backup of stock recovery of our phone I will try to build cwm recovery in English
Also if anyone want a kit Kat ROM for spice mi 496 they should contact me