Related
at first, it would be nice if any mod can modify the title to: [HOWTO] 1% battery mod on gingerbread and delete all following posts.
further i'm sorry for my poor english - hopefully everyone here can follow my steps!
the hard thing on changing battery icons on gingerbread is, that there are only 7 steps: 0, 10, 20, 40, 60, 80 and 100... that means you have to edit or replace two xml files (more later).
IMPORTANT: please make a backup of your rom! i'm not responsible if your device won't boot after modding! also it is possible that your google/facebook etc. accounts are deleted after flashing back your modded framework. but you can easily readd them again!
WHAT YOU NEED:
apk manager from here: http://www.multiupload.com/GXW01G6URJ
battery icons or a framework-res.apk with your desired icons
a rooted gingerbread rom
your original framework-res.apk (guide to extract later on)
WHAT YOU GET (IN ATTACHMENT):
stat_sys_xml_dateien.zip (stat_sys_battery.xml and stat_sys_battery_charge.xml with 100 steps)
framework-res.apk (modified by me with circlemod battery (i hope it's okay to use them in here! btw. many thx to devs (was it mdj?) for this icons). THIS FRAMEWORK WAS ONLY TESTED BY ME ON MDJ GINGERBREAD 2.2!!!
screenshot of the circle battery mod on gingerbread
FIRST STEPS:
extract apk manager to a a desired folder and conenct your phone to debug mode
start script.bat and change kompression level to 0 (type 19, afterwards 0)
type in 0 to download framework-res.apk from your phone. it asks for the path, type: /system/framework/framework-res.apk and hit enter
if asked for a name, type framework-res.apk and hit enter and confirm with Y to be your current project
type 9 and hit enter to decompile your framework and wait until it's finished
have a look in the folder "projects" - there will be a folder "framework-res.apk" now.
navigate to the subfolder: res/drawable-hdpi and delete ALL png files with the name stat_sys_battery_X.png and stat_sys_battery_charge_animX.png (while X stands for the according number). do this also with stat_sys_battery_unknown.png and stat_sys_battery_charge_animfull.png (IMPORTANT: delete last two ones only if you have a replacement icon or you will get errors on compiling!!!)
also delete following two xml files in subfolder projects/framework-res.apk/res/drawable: stat_sys_battery_charge.xml and stat_sys_battery.xml
now it gets tricky:
depending on the amount of your custom icons you have on charging, you may have to edit your stat_sys_battery_charge.xml file and delete or add the percentual steps! if you have 100 custom png's for charging animation, you can use the stat_sys_battery_charge.xml i attached (it also includes a stat_sys_battery.xml with 100 steps if you need)
now it's time to paste your modified/downloaded stat_sys_battery_charge.xml and stat_sys_battery.xml into subfolder /res/drawable/ (where you deleted the original of gingerbread before!)
go back to apk manager and type 11 to compile your framework
when it asks "is this a system apk?", type Y for yes. confirm again with Y and let apk manager create a new folder, called "keep". a list of files appears, and after that DON'T CONFIRM!!!
first you have to navigate into this "keep" folder and delete again exactly what you deleted above (stat_sys_battery_X.png, stat_sys_battery_charge_animX.png, stat_sys_battery_unknown.png, stat_sys_battery_charge_animfull.png, stat_sys_battery.xml, stat_sys_battery_charge.xml) and ADDITIONALLY the file resources.arsc
now you can confirm in apk manager to complete the compiling process. as far as i know, these steps with keep folders are needed to include the right id's automatically in public.xml! if any errors occur, feel free to post your log in this thread (see log by typing 21 in apk manager)
flash your new created framework-res.apk by entering 8.
if you didn't anything wrong, you should have your new % battery icons after reboot! as mentioned before, your desktop background maybe messed up and/or your accounts are deleted. you can solve this by just readd accounts and change background again.
Those ID's are hexadecimal numbers (dictated by the 0x prefix), and are sequential:
0 - 17302168
10 - 17302169
100 - 17302170
20 - 17302171
40 - 17302172
60 - 17302173
80 - 17302174
RJackson said:
Those ID's are hexadecimal numbers (dictated by the 0x prefix), and are sequential:
0 - 17302168
10 - 17302169
100 - 17302170
20 - 17302171
40 - 17302172
60 - 17302173
80 - 17302174
Click to expand...
Click to collapse
thx for your explanation! but i found out that it isn't necessary to edit public.xml. on decompiling, it adds automatically the missing lines when png's are listed in stat_sys_battery.xml...
finally i got it working if someone else wants the 1% increments, i can write a little tutorial.
Yea very interested. I can't stand the stock one. I knew how to do all the theming stuff on sd builds using the theme porters. Nand is different though. So please write that up, also will you post your battery mod for gingerbread
HOWTO added in 1st post!
fruchtfliege said:
HOWTO added in 1st post!
Click to expand...
Click to collapse
Thanks for the tutorial. Question though, is this for sd builds or for nand? Or does it not matter?
it is only for nand-builds. on sd-builds it should be similar, but afaik you don't have to adb the framework-res.apk. you should find here a lot of threads about modifying sd-build statusbars, because it is not that hard like on nand builds.
Cool, I'm using nand. Yea through sd builds thing stuff was easy. I couldn't change the compression in the emulator. How were you able to change it? Also is that framework at the bottom the one we use to achieve what the picture looks like?
Background changed and accounts gone as mentioned, but it worked perfectly - well worth it!
How did you change the compression when running the batch file?
Edit: Nevemind im retarded.
When i press the 9 to decompile it it gives me some B.S error Saying could not find C:\place-apk-here-for-modding.... The directory name is invalid. Could someone make this work on JDMS nand build?
Alos when i pull the framework res file from my phone it doesnt show up in "projects" Theres nothing in there. However it does show up in "place-apk-here-for-modding" folder..
Alos when i pull the framework res file from my phone it doesnt show up in "projects" Theres nothing in there. However it does show up in "place-apk-here-for-modding" folder..
Click to expand...
Click to collapse
the adb pulled apk files are stored in "place-apk-here-for-modding" folder, not in projects! a project in this folder will only be created after decompiling an apk!!!
Also is that framework at the bottom the one we use to achieve what the picture looks like?
Click to expand...
Click to collapse
you just get the statusbar at top (in fact only + battery icon). the bottom icons and background are custom with using launcher pro.
Can you think of a certain reason why i keep getting an error when i try to decompile it?
This is the error i get
--------------------------------------------------------------------------
|Wed 01/19/2011 -- 20:11:24.04|
--------------------------------------------------------------------------
'mode' is not recognized as an internal or external command,
operable program or batch file.
'java' is not recognized as an internal or external command,
operable program or batch file.
1631 KB/s (4121004 bytes in 2.466s)
Could Not Find C:\Users\Matt\Desktop\New folder\place-apk-here-for-modding\../pl
ace-apk-here-for-modding/signedframework-res.apk
Could Not Find C:\Users\Matt\Desktop\New folder\place-apk-here-for-modding\../pl
ace-apk-here-for-modding/unsignedframework-res.apk
'java' is not recognized as an internal or external command,
operable program or batch file.
Press any key to continue . . .
i think you have to install java sdk. without it, the compiling tools are not included, like on jde (i think it's called jde...)
but i'm going to make flashable zips of these files for clockwork mod. only problem is, that i don't know much about linux commands i couldn't get it working. i should start a new thread asking about this.
If you jump on irc you would get your answer in like 5secs. Room is #htc-linux-chat on freenode. Thanks for the suggestion about sdk. That does make sense now that I think about it;p
thank you for the hint. i will ask for help at chat tomorrow. i'm also working on different statusbar colours of gingerbread with original icons. before release i have to get this cwm zip flash thing working!
fruchtfliege said:
at first, it would be nice if any mod can modify the title to: [HOWTO] 1% battery mod on gingerbread and delete all following posts.
Click to expand...
Click to collapse
Just a heads-up mate - you obviously can't delete any posts, but you can change the title. Edit the first post and go into advanced mode to change it.
Good luck with your project
thank you! i have changed the title now.
Hey Fruit Fly, any progress on that cwm zip?
not really. i forgot my hd2 at home (i do theme works at work) and couldn't test the cwm zip files. on sunday evening i can test everything and tell you whats working and what not!
rafpigna from #htc-linux-chat gave me another choice of flashing easy with an adb script (thank you for that). but some users on german android forum told me it's not working. have to bugfix the files first
Yea let me know the outcome;p
I want to install the meizu theme but I'm so confused on installing the patch for the transparent bar but I'm not sure where to find the files (framework-res.apk) its talking about. I'm not sure how to install it either if I can find it. Can someone explain to me how to do this?
dude i was having the same trouble, but i read a buncha stuff and figured out how to apply the theme. but for your question, framework-res.apk is located actually ON your phone when you install the rom, it contains all the pictures and stuff for the android os, its located in the directory: /system/framework/framework-res.apk so to get if off you use adb pull, also the SystemUI.apk is located in /system/app/SystemUI.apk
Hello A little while ago I managed to learn how to theme totally from scratch. I knew nothing of anything before I started, but now I know how to port themes As I still see myself as a n00b there may be some weird things I've done, but at least I manage to create the themes This might not be the best way to theme, or the easiest, but it works
Overview PNGS
1) Getting the files
2) Getting the images
3) Port
4) Package and Sign
The only programs I've used is 7zip and autosigner download them and install 7zip and extract autosigner to a nice location for example your desktop
Getting the files
The first you need to do (after getting the programs) is to find the file you will mod (edit). This will mostly be the framework-res.apk because this decides most of looks of phone (for example the statusbar). Download the .zip of the rom your going to theme. Open it up (shouldn't require any programs, if does, use 7zip: either drag it onto the 7zip icon or right click and choose open with). Open system -> app and copy the framework-res.apk (or any other apk you would like to theme, for example the settings). Now paste it into an appropriate folder.
Getting the images
Now you need to find the images you want to use in your new theme. Find either an update.zip with a theme or an .apk with a theme chooser theme (if there is both a version for Froyo and GB, use the Froyo version as this will make it easier ) Open it up with 7zip (drag it into the 7zip icon). Now you can do either of two options:
1) You can take the whole drawable-mdpi folder and copy it out. You should probably don’t do this with a Themechooser apk, as they usually don’t have all icons in this folder, as they often lend a few from HDPI.
2) Take only the images you want and copy them to a folder. For example if you want the signal icons, copy the “stat_sys_signal_0” (-4 of course) and copy them out. If you want the statusbar background, copy “statusbar_background”. This way you can mix several themes, take the best of several themes and make your personal theme
When you’re done getting your icons, close the window.
Porting
Now open the Rom’s default framework-res.apk with 7-zip. If you’re going to port a whole theme, delete the /res/drawable-mdpi folder and copy in your own. If you’re going to port just a few icons, open the /res/drawable-mdpi folder and paste your icons. You might want to check if the icons have the same names in the different framework. For example the headset icons can be both “stat_sys_headset” and “stat_notify_headset”. Also if you port from a theme chooser theme, you will have to rename every single .png you port. This is really boring, but necessary. You need to remove the “framework_res” and the “android_systemui” from the beginning of all the names. So “framework_res_activity_title_bar.9.png” needs to be changed to “activity_title_bar.9.png”. Because this is so boring you better keep your renamed icons, so it’s easier to port it to another rom
This is kind of off-topic: my carrier lends network of another carrier. Therefor my phone is allways roaming. This puts a stupid “r” with my signal icons. To avoid this I allways take normal signal icons, copy them, and rename one of the two .pngs from for example “stat_sys_signal_1” to “stat_sys_r_signal_1”. This way I get rid of this stupid “r” and it will always show the normal icons
Packing and signing
Now the porting is done and the next job is to push the new framework to your phone. If you are familiar with adb, you can push it to system/framework on your phone. You don’t need to anything more with the apk before pushing it. Else you can create a flashable .zip for your theme. I’ve attached a .zip with update script (I haven’t created it. Just stole it from one of Elelinux’ add-ons ). Download the zip. Create a folder named system and a folder named framework. First drag the new, modded framework_res.apk to the framework folder, then drag the framework folder into the system folder, before you drag the system folder into the attached zip. If you use Clockworkmod recovery, you can just flash the zip right as it is, but if you use Amon_Ra or want it to be compatible with every recovery because you want to post it, you need to do something.
Unpack autosigner and launch the exe file inside. Drag the .zip into the new window and press sign. It will now appear a new file in the same folder as the file you wanted to sign. Its name is the same, but with “_signed” at the end. You can rename the file as you wish both before and after the signing.
XML Editing:
I decided to add a little section about XML editing as well I really don't know all about this myself, but i can tell how to set it up and some examples to what you can do Even though this may seem really complicated, it's not written in a completely different language, like Java in the smali files, so often it is possible to use logic to get what you want
Tools needed: APK Multi-tool. as well as Java, if you don't have it installed.
Overview:
1) Setting up
2) Examples
3) Finish
Settings up
Download APK Multi-tool and extract/ unzip it to wherever you want ( I have it on my desktop). Now you can place the apk you want to modify (usually the framework_res.apk) in the "Place_apk_for_modding" folder. Then you open the script. If you don't get an error, proceed to b), if you do get an error proceed to a)
a)) If you do get an error where it says something like "java not found" you need to correct the Java path (or install Java if you haven't done that, which you should have) . I had to do this to get it working. First open my computer and click disk C, or D if you have installed Java there. Open programfiles (or whatever it's called in your language) and scroll to the Java folder. Now open the folder there jdk folder or whatever you have there and open the "bin" folder. Look at the top of your window, where it says where on you're computer you are (like Windows: C to the left, and then Programfiles and so on). Right click it and click copy address. Mine is "C:\Program Files\Java\jdk1.7.0_01\bin . Now you can close the window.
Open "My computer" again. On the top bar below the navigationbar, click Sytemoptions (sorry, not really sure what it's called in Englsih, as my computer is Norwegian, please correct me if I'm wrong). On the left click the "advanced" link and in the popup that appears click "environment variables". Scroll down to the "path" variable and edit it. Paste the address you copied and click OK. You should now be able to proceed to b). If you still get an error, please tell me and I'll try to help
b) type 25 and press enter to select current project. Here you will see all the apks in the "Place_apk_for_modding" folder. Select the appropriate number (in this case probably 1) and press enter to continue. Then you hit 9 and enter to decompile it. I cannot really explain it, but it enables you to edit the xmls in the apk. If you try to edit them by using 7Zip, the xmls will be just messed up. When it's done decompiling, you have gotten a new folder in the "projects" folder. In this case it is probably named framework_res.apk. Minimize the script (DON'T CLOSE IT) and you're ready to edit the xmls
Examples on edits:
COMING SOON
Finish:
When you're done editing, open the script again (remember what I said about not closing it? ). Click 11, unless you are editing a non system apk. If you are editing the framework or settings or such, use 11. If you get an error now, you have probably done something wrong, try to see in the log what you have done wrong. Every time I've had an error, I've ended up in bootloop when I've flashed, so it is probably better to just start over. Another tip is to do one thing at the time. For example: you decompile, edit the notification color in pulldown, compile. Take the compiled apk, decompile edit another thing and so on, this makes it easier to not mess up and it also shows what you are doing wrong.
On the "Is this a system apk?" you should probably say y, as I said above. I also usually copy over the files I didn't edit, as this seems safer. Follow the instructions and you should be fine. When you're done and the script is done compiling, you will find a unsigned_**** (for example unsigned_framework-res.apk) in the "place_apk_for_modding" folder. This is your modified apk, and you can try to push it to ur device with an update.zip or adb, if you know how to use that
Well this was the end of my guide for now If there's anything which is unclear or you have other suggestions, feel free to post I've probably forgotten something
Finally after all my attemps to modify the android framework before i have do it correctly. I have changed a couple of things, the lock screen and battery icons so far. The framework I'm modifying is the one on Ele's Gingerbread and i wonder how to get the battery icon percentage 1 by 1 as i saw in some other themes. What i mean is that in the original framework there is only battery icons for 15, 20, 25 and so on, and if i push the 16, 17, 18, 19 they won't work. Is Theme Chooser the one on charge of this? how can i get that? some help please?
(Also tryed to theme a sense rom, but everything was messed up, i guess because of sense or maybe I did something wrong)
So thanks for your guide, really helpfull
Yeah, I've never tried to theme Sense so I don't know. It is probably possible to make icons for every %, but then you'll have to decompile using APK tool, and it is harder. I don't know how. If you want to try, you could try asking a question here
thanks
so funny=))
i'm tried
Great guide helped me a lo thx.
Finally, someone who CAN explain it...
I'm now porting ICS to GB (no cm7), cause I think CM sucks.
mDroidd said:
Finally, someone who CAN explain it...
I'm now porting ICS to GB (no cm7), cause I think CM sucks.
Click to expand...
Click to collapse
Hmm, ICS themes can be made really awesome, if you do some more advanced stuff. For example you want to remap the pulldownbar a bit, and change som text colors. But to do this you need to use a tool like APK multi-tool, and it is a bit more advanced. If you want to, I can create a new section where I show how to this
Thank you.
GUIDE UPDATED! Added a section about XML editing really quick, probably forgotten something and such, so just ask if there is something you don't understand This is for those who are getting used to the PNG editing and want to proceed to something slightly more advanced, for example you 7Tosta
Cheers
BTW: I should've reserved the 2nd post, this is getting messy
Edit: If there's anything specific you want me to add to the EXAMPLES section, tell me
Hi there.
The greatest thing about Android is that you can change just about every element of the U.I, and if all you want to do is change a few images it's as simple as copying and pasting, but this guide will teach you how to...
[*]Use ADB Commands
[*]Deodex
[*]Decompile
[*]Recompile
[*]Sign
[*]Zipalign
...in an easy to follow manner that will have you theming your own apks in no time. There are many many GUI programs which I'll link to below that automate the following process but experience has taught me that it's important to know the basic process for when those programs don't work, are no longer maintained or you just don't like them for whatever reason etc, and to be honest command line editing for me is just as quick, and I personally prefer the ability to have everything in one folder. So lets begin.
Some Requirements:
A Rooted Phone.
A BACKUP OF YOUR PHONE!
Java - Do this first if you don't have it installed already.
Notepad++ - An essential program for xml editing!
Photoshop or Gimp - You'll need one of these for image editing.
7-Zip or WinRar - Required for apk editing.
Patience. :silly:
Use Linux or a Mac? See the following threads for more information on using apktool on other Operating Systems...
[WIN/LINUX][Decompile/Compile] Quick Mod Tool 4.0 [decompile and compile with speed]
APK Manager for Mac OS X
[Linux][UTILITY][TOOL] APK Multi-Tool
[tutorial] decompiling,recompiling and signing in linux (27-01-2013)
How to install and use Apktool with Ubuntu
Quick Tips;
.apk files are applications on your Phone, but when they''re on your computer you can browse them exactly like you would a .zip file, so set your default zip program as the default program for handling apks which will makes things much easier when working with them.
Download themes for your Phone, for other Phones too even and compare the res folders and screen shots of the theme as that will give you a good idea of what image you need to look for when modding your own apks.
If all you want to do is change images then you don't even necessarily need to decompile, you can just drag and drop images in to an apk to replace a stock image so long as they have the same file name.
For more complex mods like changing text colors and layouts (.xml files) and editing .9 png images then you will have to decompile.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Most of us will have Java already installed, but if you don't then get it installed before doing anything else. To save you the time and hassle of figuring out what else you need to download etc I've made a zip for you to download which contains Apktool and ADB.
Download APKTool_CMD.zip to a location of your choice, preferably the C:\ drive which will give you a folder to work from. This is how mine currently looks...
Once your folder is setup, java and other tools installed, you're going to want to get any apks you want to theme off your Phone and there are numerous different ways to this, but we're going to use adb commands to pull files to your computer so we need to open a command prompt window in your Apktool folder. To do this simply hold the shift key then right click your mouse in the Apktool folder and select "open command window here", or just click on the included command prompt.bat.
I like to pull the whole system as soon as I'm rooted as it gives me a backup of stock files which I can then copy and deodex to be themed.
The command to pull your whole system is...
Code:
[B]adb pull /system/ Z1C_368[/B]
...you can choose something other than Z1C_368 as your folder name but it will create that folder in your Aktool folder. Alternatively you can just download individual folders, the commands are as follows...
Code:
[B]adb pull /system/app/ Z1C_368 app
adb pull /system/priv-app/ Z1C_368 priv-app
adb pull /system/framework/ Z1C_368 framework[/B]
...or pull individual files...
Code:
[B]adb pull /system/framework/framework-res.apk[/B]
...so now you should have a APKTool_CMD folder with another folder within it and at least your app, priv-app and framework folders in that, which we can use for the next step.
The tool I use is this - [Tool/Utility] JoelDroid Lollipop Batch Deodexer. While I will deodex all the files I've pulled to my computer experience and battery life has taught me to only deodex the apps I've themed on the phone, rather than run a fully deodexed ROM.
Before you can do anything else you need to install your framework-res.apk and SemcGenericUxpRes.apk/twframework.apk, which will put two apks at C:\Users\YourPCName\apktool\framework which are the resources apktool uses to work its magic. The two commands to install your two resource apks are...
Code:
apktool if framework-res.apk
apktool if SemcGenericUxpRes.apk
The command for decompiling is...
Code:
[B][U]apktool[/U] [U]d[/U][/B] framework-res.apk
...which will create a folder named like for like except for the .apk extension, and in this folder is where you'll find a couple of folders, the main one always being the res folder as it's in this folder that you'll find your images and xmls to edit. First glance of a decompiled res folder can be overwhelming, 596 folders in my frameworks, but we only need to focus on a handful in the majority of apks, and they are...
drawable
drawable-xhdpi-v4 (drawable-xxhdpi-v4 depending on your device)
layout
values
...you may need to delve into others sometimes but it's very rare that I've had to.
Once you've finished making your mods you need to recompile your apk using the following command...
Code:
[B][U]apktool[/U] [U]b[/U][/B] framework-res
...notice you only use the folder name here. If you get any errors here due to a bad edit apktool will usually tell you, in a roundabout way, you just need to read the code it throws up then retrace your steps, correct any bad edit and try again. If all goes smoothly you'll now have a new folder called dist, which contains your newly modified apk, but you can't use that just yet.
This is where 7-Zip or WinRar comes in to play. We need to extract from the original apk the Android.Manifest.xml and META-INF folder, into the dist folder, then from the new apk extract the resources.arsc also into the dist folder, then drag and drop all three files back into the new apk, but NOTE, it's important that you choose store as the compression method, any other will break the apk, and if you replace a broken framework-res.apk you will bootloop.
And signing is as simple as that. Alternatively you can use the following command...
Code:
[B]java -jar signapk.jar testkey.x509.pem testkey.pk8[/B] framework-res.apk.apk framework-resS.apk
...notice the extra "S", the output name has to differ from the input name otherwise it will give an error, if done right it will create a new apk called framework-resS.apk, just remember to rename it back to the original before using it on your Phone.
[TOOL] pySignare - Quickly Sign APKs [Windows]
Signing For The Play Store
If you plan on Publishing a Theme or any other app/apk to the Play Store then using the above method to sign your apks just wont work because you need to give it an individual signature that is unique to you, thankfully @AndroidGraphix has written a great guide that will show you how, it's a bit more fidgety than the above method but simple enough to follow...
AndroidGraphix said:
Click to expand...
Click to collapse
- Noobs guide to signing an APK with a Private Key
DISADVANTAGES OF UNALIGNED APKs
Quite understandably, situation would be reserved for unaligned application packages. Resource reading would be slow and memory usage would be on the higher end of the spectrum. It would also depend on how many unaligned applications are present. For example, if less number of applications with an unaligned home application, you’d see slower application launch times. This is the best case scenario. For a worst case scenario, having a number of unaligned applications will result in the system repeatedly starting and killing processes, struggling with lags and huge battery drain.
Click to expand...
Click to collapse
- SOURCE
Move your new signed apk into your APKTool_CMD folder, you can overwrite your original if you want, and use the following command...
Code:
[B][U]zipalign -v 4[/U][/B] framework-res.apk ZAframework-res.apk
...notice the ZA, zipaligning creates a new apk which has to be named different from the original, but use what you want, it'll need renaming again before you use it.
So now we need to transfer your apk back to your Phone, you can do it by copying to your SD, then to your system, change permissions, then copy to the right folder, but that's not only time consuming but highly tedious too, so a simpler method is to use adb using the push command as this allows us to push straight to the system overwriting the original with the correct permissions too. To use this method you'll need you'll need an unsecure kernel and/or Chainfires adbd Insecure app. Try the app first but if you still can't mount and push files read this thread - [HOW TO]Make your favorite kernel adbd insecure to run ADB as root on /system and try again.
Rename your zipaligned apk to it's original name, then we need to mount the system before we can push direct to the the system, and the command for that is...
Code:
adb remount
...then we need to make sure we're pushing our apk to the right folder on the Phone, so for the framework-res it's...
Code:
[B][U]adb push[/U][/B] D:\Xperia\Z1C_368\APKTOOL\framework-res.apk /system/framework
...yet for the SystemUI it's...
Code:
adb push D:\Xperia\Z1C_368\APKTOOL\SystemUI.apk[B][U] /system/priv-app/[/U][/B]SystemUI
...if it's any one of those two then generally you need to reboot, so just type...
Code:
adb reboot
...your Phone will restart and if you've done everything right your new mods should be displayed, happy days. So that's it for how to use command prompt for modifying apks.
So now you know how to prepare an apk for editing your going to want to theme it obviously, and the following links will help you with that.
XML 101 - XML Modding Made Easy!
How To Edit Resources
The Ultimate Android Themeing Guide
[GUIDE] Smali coding guide for beginners
[Reference] Interactive Phone Modification [GUIDE]
[TOOL] Android Drawable Resizer Tool
[GUIDE] Want to learn how to theme?
[Guide] demystifying build.prop [Valid entries]
General Questions about Themes GO HERE!!!!!
[INFO] Custom framework-res.apk resources.arsc using vendor overlays
[Tutorial][NICS Themer] Create Your Own Themed apk & Become a Themer
U.I Modding
Tutorial :- Changing App Icons
[TUTORIAL]How to Theme Your MMS
[How-to] Edit the "About Phone" display
[Tutorial][VIDEO] Add/integrate apps into Settings app!
[TUTORIAL] Where to find the colors for making a theme
[MOD][GUIDE]LockScreen Clock with seconds[ANY ROM]
[TUTORIAL] How to add various framework/Settings mods
[TUT][JB] HOW TO THEME SystemUI.apk for TOTALLY newbie!
[HOWTO] Integrating/Adding applications to the settings menu
[TUTORIAL][ICS][GB][JB]How to change Android's black background
[GUIDE][Ultimate]Theme Apps To Dark Theme | Theme Whole System | Newbies Here! 12/11
Text...
Text Color Guide
[GUIDE] Tips for themers
[GUIDE][REF]Changing System Text Settings
Statusbar...
[MOD][TUT] Merge The WiFi And Signal Icons
[GUIDE][MOD][SYSTEMUI] How to add 0.00KB/s meter on statusbar GB/ICS/JB
[TUT] How To Center The Clock On The Statusbar..And Move Other Icons As Well!
[How-To]Removing Battery Percentage, Adding Toggles,Battery Circles to Statusbar
[GUIDE][Mods][All Devices]How to add/ Change Clocks to Analog/ Digital with Seconds
The three best/most popular GUI programs are...
@Diamondbacks - Virtuous Ten Studio
@Ticklefishs - [TOOL] Tickle My Android
@BDFreaks - [Tool]Advanced ApkTool
...there are others but these are I what I tend to see referred to the most.
TIP:
Restoring modified files if you mess up is easier and quicker with a CWM.zip, especially if you're modifying any framework apks! Just because an apk might build with no errors doesn't mean it won't give you any when installed to the Phone.
I hope after reading this explanation you're left wondering what all the fuss is about, as it really is quite simple. I'll use the following two images, btn_default_pressed_holo.9 & status_bar_close_off.9 to illustrate the basic point of the borders...
Decompiled .9pngs:
Recompiled .9pngs:
Those borders control which part of the image is stretched (Left & Top) and where on the image content will be displayed (Right & Bottom). We'll use Draw 9-patch which is for editing the borders of decompiled .9pngs and lets you see how the image, when stretched, will be displayed on the Phone. Notice that the borders are different sizes, well that's because I only want/need a certain part of the image to stretch to get the desired look on the Phone.
...in the image below the left side shows the stretched image and desired effect should look on the Phone and the right side shows how it would look if I had edited the borders incorrectly or used none at all...
You can get away by not using a border but you would need to edit your image to specific dimensions to accommodate for the stretching, for example it might look fine for a simple OK button but it might not look right if you used the same .9png for a screen press which stretches the whole length of the screen, so you're better off just using them to begin with, plus you'll more than likely get errors down the line while decompiling or recompiling your apk.
The use of the border is made even more clear when you add text to an image. For my status_bar_close_off.9 I've filled all four sides of the image (except for an empty pixel in all four corners as that is the max amount of border you can use) as I need it to stretch the image just how I've edited it...
...but if I used the same sized left side border as the btn_default_pressed_holo.9 then this is how it would look on the Phone...
...which is obviously not the look I'm trying to achieve, as the left side border is causing the image to stretch incorrectly.
So that's basically it, depending on the image you're editing you can usually leave the borders alone but if you create one from scratch then you might need to play about with them if your images doesn't look quite right when used on the Phone. Here's a few links that will assist you further, especially the batch editing...
How to edit .9.pngs
[TUTO] Create your 9.png !
[UTILITY][TOOL] 9patchPngSuite [Windows&Linux]
How to draw NinePatch images with Photoshop - .9.PNG
[TOOL][Multi-Platform][.9.png][ALL DPIs] Android Resizer Tool
[Tutorial][Commentary] How To Batch Edit .9PNG/PNG Images
[tool] 9compiler - batch process for themers android
ClockworkMod Recovery zips are used for flashing individual files to whole ROMS and can be a life saver if you push a badly edited apk to your Phone that results in a bootloop. There's also a few programs that can assist you with that too, but if all you're doing is replacing a few files all you really need is a template, then it's just a matter of creating the Phones folder setup in the zip which is simply creating folders: system\app - system\media\audio etc then dragging and dropping your files into it. A basic understanding of the updater script is essential, a ROM.zip will more than likely wipe your Phone whereas a Theme.zip may just replace files but it might delete some also.[/QUOTE]
See below for a CWM.zip Template but first some helpful links...
[Tool]easy flasher v4 (ur own update.zip)
[Tool][Windows/Linux] Android Flashable Zip Creator
[Utility-Tool][DEVandThemers]CWMflashpack.zipCreatorV1{TheCollective}w/EdifyScripting
ERRORS encountered in CWM Recovery
[TUT] [for NOOB] editing updater-script for noobs!
[TUTORIAL] Making Flashable ZIPs, EDIFY Script, ZIP Signing & Key Creation
This is my Restore_zip which is set up so you can add your own files to the framework and apps folders in the main system location, but you can easily add other folders to it if you want to add things like fonts, tones or anything else, just remember to add folders within folders if that's where the files you want to include are such as tones, media\audio\alarms for example.
If you navigate to META-INF\com\google\android you will find the updater-script which controls how the zip works and the text you see when you run it in CWM. As this zip is just for basically over writing files you don't need to edit anything except for a few lines...
...this is how I've edited it for my theme...
...so just edit it using Notepad++ to your liking.
When adding files to your zip add them using Normal as the Compression Method...
...Remember to remove the text files I've added otherwise they will be flashed to your folders too.
And that's pretty much it, the only way you're really going to learn is by reading then putting into practice what you've read and picking stuff up along the way, fortunately there are numerous guides for numerous mods and tools to help with a variety of tasks.
Notable credits and thanks to @iBotPeaches and @Brut.all for making it possible with - Apktool
Useful Suff...
rovo89 said:
In this thread, I'm presenting a framework which gives you the possibility to modify your ROM - without modifying any APK (developers) or flashing (users)!
...
Advantages:
No need to modify any APKs. This means:
No need to decompile, change things in smali, compile, sign, ...
It will work for odexed and deodexed ROMs.
Your mod is not bound to a specific version of the ROM. Unless there is a major change in the methods called for a certain functionality, your mod will continue to work even when you upgrade your ROM. Hell, it will probably even work with different ROMs.
Multiple mods can be installed at the same time, even if they change the same package. So you can use these battery icons and those quick toggles. Even hooking the same method twice is possible. Of course, this only works properly if the mods are not trying to do incompatible things.
It does its magic at runtime. That means you can implement options to let the user decide if they prefer the bikeshed to be painted in red or blue. Or you can have some extra logic for certain ROMs without building different mod versions.
It can be disabled easily without having to reflash.
It's open source.
Click to expand...
Click to collapse
- [FRAMEWORK ONLY!] Xposed - ROM modding without modifying APKs
Annex1 said:
CM10.1-THEME_BOOK
Theme book was created by Annex and Ebs512. I've been asked alot of questions from how to get started? what do I need to get started? to What Graphics program do I use? etc. We made a real simple theme guide to help get you started. This is in Layman Terms.. Nothing fancy.
ONLY THING FANCY IS MY FLASH BOOK
YOU MUST HAVE A FLASH PLAYER INSTALLED TO VIEW THIS!!!
Click to expand...
Click to collapse
- [GUIDE] HOW TO THEME CM10.1 - Animated Book
[Guide] Porting XTheme themes
[How to] XMLGenerator.jar + batch script v2.0
[Guide] Xposed Framework/TabletUI (Noob-Friendly)
[Tool] Drawable XML generator for CM7 theme chooser
[Guide] How to port themes to T-Mobile Theme Chooser
[Tool] [Theme Creator] [CM/Avatar] Theme creator tool
[INDEX][WiP] List of APPs & MODs that use XPOSED Module
[Tool] nhnt11's XML Generator Revived V2+Extended UPDATED!
[DEV/GUIDE]Creating APKs for use with TMobile Theme engine
[Tool][PortCx] Port CM Themes to Xtheme Engine in One Click!
Theme-Porter [v1.0] [Any Firmware / Rom Compatible] [WINDOWS]
[GUIDE] T-mobile theme engine for the faint at heart (non-linux users)
[1/30/2013] Mega 4.2.1 BlackBean Theme Template [XXHDPI/XHDPI/HDPI/TVDPI]
[MOD][XPOSED][4.0+] XThemeEngine beta5 - Theme engine for any rooted phone
[APK][Xposed] ResXploit : Theming your android the easiest way! No decompiling APKs!
-·=»‡«=·-[JB][CM10] Theme Engine Template Updated To V4 [8-7-12][XHDPI/HDPI]-·=»‡«=·-
Hi Guys, I tried to do a small tweak to my ROM like just a color change to signal bars, as mentioned in the XDA university, but once the apk is pushed to system/app and restarted, it went to bootloop. I just changed the color of a image file using GIMP (as mentioned), then dint work, so just tried decompiling SystemUI.apk and then recompiling then folder without any changes and push to system folder, even that dint work, then i saw this thread, i tried the replacing the resources.arsc from old apk (opened using winrar, and dragged to my folder), the opened my new recompiled SystemUI.apk with winrar and added this resources.arsc file which i extracted with compression option as Store, then pushed it bcak to /system/app folder , every time i pushed i connected the phone in recovery mode. But still in bootloop, the moment i replace the apk with original one, it works, can some one pls point out what am I doing wrong ?
Hardware - I9100 - galaxy S2
ROM - JellyBAM 3.3
Kernel - Siyah 5.1+
thanks,
merin
merin_83 said:
Hi Guys, I tried to do a small tweak to my ROM like just a color change to signal bars, as mentioned in the XDA university, but once the apk is pushed to system/app and restarted, it went to bootloop. I just changed the color of a image file using GIMP (as mentioned), then dint work, so just tried decompiling SystemUI.apk and then recompiling then folder without any changes and push to system folder, even that dint work, then i saw this thread, i tried the replacing the resources.arsc from old apk (opened using winrar, and dragged to my folder), the opened my new recompiled SystemUI.apk with winrar and added this resources.arsc file which i extracted with compression option as Store, then pushed it bcak to /system/app folder , every time i pushed i connected the phone in recovery mode. But still in bootloop, the moment i replace the apk with original one, it works, can some one pls point out what am I doing wrong ?
Hardware - I9100 - galaxy S2
ROM - JellyBAM 3.3
Kernel - Siyah 5.1+
thanks,
merin
Click to expand...
Click to collapse
Hi There
Try using 7zip to update the apk instead of winrar. if that doesn't work, post your logcats,
Thanks
trevd said:
Hi There
Try using 7zip to update the apk instead of winrar. if that doesn't work, post your logcats,
Thanks
Click to expand...
Click to collapse
I will try that when i get back home today, and is there any option i need to set when using 7zip like store mode ?
thanks,
merin
hi, I tried with 7zip, 1st i just opened the recompiled zip with 7zip and dragged and dropped the resources file from original apk to this archive, and pushed to phone , still boot looping, and then tried to right click on the resource file from original apk, and selected add to 7zip archive, and changed the archive format to .zip/compression mode to Store and saved, then pushed to phone, still boot looping. So here i have attached the logcat, hope that is correct how i have done it, after rebooting the phone, i typed in consle logcat > log.txt and it was waiting for device, once in boot loop i did ctrl + c, then it exited. Please let me know if you need more info, do i need to attach my original SystemUI.apk and framework-res.apk ??
Happy New Year !!!
thanks,
merin
Nice tuts I will try at home :thumbup:
Sent from my ST18i using xda premium
merin_83 said:
then i saw this thread, i tried the replacing the resources.arsc from old apk (opened using winrar, and dragged to my folder), the opened my new recompiled SystemUI.apk with winrar and added this resources.arsc file which i extracted with compression option as Store, then pushed it bcak to /system/app folder , every time i pushed i connected the phone in recovery mode. But still in bootloop, the moment i replace the apk with original one, it works, can some one pls point out what am I doing wrong ?
Click to expand...
Click to collapse
Hi.
Are you copying the AndroidManifest.xml and META-INF folder from the original to the new apk too?
Actually i did the exact thing you said yesterday, when i found in the youtube, and it worked thank you!, but dint copy the resource file (but had some fc's when opening camera 1st time), may thats the reason,,, so i should copy AndroidManifest.xml and META-INF and resource file ?, and is this a standard procedure when we do a recompile every time ? or it varies with situation ?
thanks,
merin
Hey hi guys....can any 1 tell me how to set boot image which i want hmmmmm
Sent from my HTC Desire HD using xda app-developers app
merin_83 said:
so i should copy AndroidManifest.xml and META-INF and resource file ?, and is this a standard procedure when we do a recompile every time ? or it varies with situation ?
Click to expand...
Click to collapse
It's how I do it every time and never have an issue (unless I've screwed up somewhere), so yes.
sagar4all007 said:
Hey hi guys....can any 1 tell me how to set boot image which i want hmmmmm
Click to expand...
Click to collapse
oh okey thank you XperienceD, does it make a difference if we just use apktool or Androidsuite for decompiling and building ?
thanks,
merin
merin_83 said:
oh okey thank you XperienceD, does it make a difference if we just use apktool or Androidsuite for decompiling and building ?
thanks,
merin
Click to expand...
Click to collapse
I think androidsuite uses apktool for its decompiling and build it just uses it through a ui as apktool is command line so its more a preference of use for you
Sent from my GT-N7000 using XDA Premium HD app
ttibbetts83 said:
I think androidsuite uses apktool for its decompiling and build it just uses it through a ui as apktool is command line so its more a preference of use for you
Click to expand...
Click to collapse
What he said. I've set this up for when such programs don't always work.
How about some links for how to guide for Ubuntu user and some links on .XML file editing I was doing .apk mods on windows then started messing around with Ubuntu and find its I little more work to get it setup but all an all it to me is a better environment for android then windows IMOA
Sent from my GT-N7000 using XDA Premium HD app
ttibbetts83 said:
How about some links for how to guide for Ubuntu user
Click to expand...
Click to collapse
After a quick search for android theming ubuntu there doesn't seem to be a lot of information for it, and this post...
Nikkopt said:
What and where have you heard about Ubuntu helping on theming? It depends on personal taste and choice. You also have much more tools to help you graphically on windows and mac os.
Click to expand...
Click to collapse
from this thread - Which version of Ubuntu is recommended for theming? suggests why.
here are some links for ubuntu installs that will help with .apk modding on ubuntu for those who want it
how to setup apktool on ubuntu
http://my.opera.com/ubuntunerd1/blog/2012/08/20/how-to-apktool-with-ubuntu-under-construction
ubuntu version of paint.net
http://pinta-project.com/
xaraxtreme looks to be a good program from what i have read but i have not tryed it out yet
http://www.xaraxtreme.org/download.html
gimp is avalable through ubuntu software center and for .xml ubuntu has built in editer software just by right click and open with text editer
hex color website http://www.procato.com/rgbfind/
Nice guide my friend :good:
if anyone get apktool doesn't work on apk JB 4.2.2 ROM you can use this Latest apktool http://d-h.st/cze
Rizal Lovins said:
Nice guide my friend :good:
if anyone get apktool doesn't work on apk JB 4.2.2 ROM you can use this Latest apktool http://d-h.st/cze
Click to expand...
Click to collapse
Thanks Rizal.
Hey people, I've just found it at O3D forums and I think I should share the information, as I don't have time for creating a good tutorial myself.
This way you can change colors for your own likes and make a lot kind of themes.
Before starting you should have your Apktool environment set up.
1. (only if you never saw APKTOOL in your life, otherwise, just jump it)
1· Download and install latest version of Java JDK
2· Download latest version of APK Multi-Tool as we'll be using it for un/packing APKs and push/pull them from/to our device.
3· Extract it anywhere you may like. If posible, in C:/ to avoid any kind of problems. Be sure to read README file before asking something about it.
4· Run Setup.bat, type 3 and press Enter. Close it.
5· Run Script.bat, type 0 and press Enter. Now let's type our framework's path.
6· /system/framework/framework-res.apk for basic framework file. This will be pulling it out from our phones.
7· Repeating Number 5, type /system/framework/lge-res.apk for LG's framework file.
8· Now move to X:\...\APK-Multi-Tool\place-apk-here-for-modding\ and copy both apks (framework-res + lge-res) and paste it at X:\...\APK-Multi-Tool\other\
9· Run Setup.bat again, type 2 and press Enter. Now both frameworks should be installed and we are ready to un/pack APKs from the version we're actually using (v30A/B/C/D...). Close it.
10· Back in Script.bat, type 0 again followed by Enter, then type the path of your desired APK. (/system/framework/xxxxxx.apk for frameworks & /system/app/xxxxxx.apk for apps). After pushing it, select it as your actual project.
11· Now type 9 followed by Enter. This will unpack our APK.
12· Now is the time for tunning anything you want to. Go to X:\...|APK-Multi-Tool\projects\xxxxxx.apk\ and you'll find there everything.
13· When it's done, let's re-pack it typing the option 11 followed by Enter. When repacking gets done, it will ask if you want to use any files from your original APK. Tell it Yes, otherwise your apk won't get signed.
14· When the extracting is done, move to X:\...|APK-Multi-Tool\keep\ and erase everything there BUT META-INF folder + AndroidManifest.xml. Now press anything at APK Multi-tool window and you'll get your APK ready to go.
15· Now type 8 to push it back to your phone and type the desired path. If it cames from /system/app/xxxxx.apk or /system/framework/xxxxx.apk.
If you get any error recompiling it, you should take a look at the log, typing 23 and fix it at the projects folder.
Click to expand...
Click to collapse
2.
potaturrias said:
When i maked this theme (my first theme) y used trial and error procedure.
The first step is replace or edit 9.png. pictures in drawable-hdpi folder located in framework-res.apk and lge-res.apk, you can do this quickly using this tools:
http://jgilfelt.github.com/android-actionbarstylegenerator (Check that the names of new pictures match with the old pictures)
http://android-holo-colors.com/
Many images have to edit them by hand
If you put more files than originally,for example switches in lge-res drawable-hdpi, you will get an error when try to compile.
The second step is replace xml files in drawable folder using xml files from zip file that you downloaded in the previous step.
If you don't get the desire result you have to edit styles.xml or drawable folder files or layout files to change backgrounds colors, text color,etc.
Remember there applications with lines in XML files that reference to framework or lge-res, for example:
android:textColor="@*android:color/transparent makes reference to transparent color defined in framework-res and
android:textColor="@com.lge.internal:color/transparent makes reference to transparent color defined in lge-res.
I hope that this mini guide help you, remember that you can make your theme based on this theme, will be easier i think.
Click to expand...
Click to collapse
Thanks to @potaturrias!