i jst rooted ma galaxy mini and installed ClockworkMod Recovery....now i want to flash rom new experience 4...before that i want to create sd partition but i am getting how to create sd partion for internal memory....i have 4 gb card..plss help..how to create sd partion on galaxy mini....????wch 1 s gd ??
surendra13 said:
i jst rooted ma galaxy mini and installed ClockworkMod Recovery....now i want to flash rom new experience 4...before that i want to create sd partition but i am getting how to create sd partion for internal memory....i have 4 gb card..plss help..how to create sd partion on galaxy mini....????wch 1 s gd ??
Click to expand...
Click to collapse
Here you go: partition sd card
Was that so hard?
Next time do your homework!!
surendra13 said:
i jst rooted ma galaxy mini and installed ClockworkMod Recovery....now i want to flash rom new experience 4...before that i want to create sd partition but i am getting how to create sd partion for internal memory....i have 4 gb card..plss help..how to create sd partion on galaxy mini....????wch 1 s gd ??
Click to expand...
Click to collapse
try this software for partition SD Card.. use Ext2 or other on file system. MiniTool Partition Wizard Home Edition on the Web
search on CNET Download. maybe helpfully
you can search in youtube "Cách phân vùng ext2 thẻ nhớ" and follow it
or you install ClockworkMod recovery
chose Recovery => advanced => Partition SD card
if sdcard have
1G => 128mb
2G =>256mb
4g=>512mb
8g=>1G
and the partition 2 is swap
you can chose 128 or 256
reboot and check in pc
sr i can't post link ^^!
shinnobi said:
you can search in youtube "Cách phân vùng ext2 thẻ nhớ" and follow it
or you install ClockworkMod recovery
chose Recovery => advanced => Partition SD card
if sdcard have
1G => 128mb
2G =>256mb
4g=>512mb
8g=>1G
and the partition 2 is swap
you can chose 128 or 256
reboot and check in pc
sr i can't post link ^^!
Click to expand...
Click to collapse
I'm using rom TouchWiz_CM(Full TouchwizUI on CM7) , link: http://forum.xda-developers.com/showthread.php?t=1838305
Can i partition my sd card? and how to config my phone after that?
Why so snotty?
thousandecibels said:
Here you go: partition sd card
Was that so hard?
Next time do your homework!!
Click to expand...
Click to collapse
I did google it myself and the link brought me here to read your snide response. I grow weary of the attitudes from people like you on this site.
Iron_Dingo said:
I did google it myself and the link brought me here to read your snide response. I grow weary of the attitudes from people like you on this site.
Click to expand...
Click to collapse
oh boy... if this issue wasn't discussed before, he wouldn't post that... y'all really need to learn how to google properly...
odin0706 said:
I'm using rom TouchWiz_CM(Full TouchwizUI on CM7) , link: http://forum.xda-developers.com/showthread.php?t=1838305
Can i partition my sd card? and how to config my phone after that?
Click to expand...
Click to collapse
Yes,you can.After that you can use S2E or Link2SD to config SD-ext.I gess you flash New Experience rom 9.9.1,it already has S2E and very smooth.
it's strange:
I use last CWRM 6.0.2.7 for mini by dany
but when I partition SD
I get ext 3 partition
how to get an ext 4 partition?
thanks
giorss said:
it's strange:
I use last CWRM 6.0.2.7 for mini by dany
but when I partition SD
I get ext 3 partition
how to get an ext 4 partition?
thanks
Click to expand...
Click to collapse
U can use mini partition wizard to get ext4...
Sent from my GT-S5570 using xda premium
wait_close said:
U can use mini partition wizard to get ext4...
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
thanks... I tried to use it before and it creates a right ext 4 partition, but the rom (lenio rom v4) does not recognize the partition
I tried to label the partition "sd-ext" or with no label
but in both modes it does not work
incredible... I did the ext4 by minitool but the a2sd on lenio v4 does not recognize the sd-ext
update:
created ext4 by minitool partition wizard, but it seems that phone can't recognize it, coz the rom does not see the partition
is there something to do to make the phone create/see ext4 partitions?
tried the last attempt, with another CWM (5.0.2.8 touch ext)
I partitioned the SD, choosing ext4, but when I control, it's ext3
why that???
Some possible problems,
giorss said:
tried the last attempt, with another CWM (5.0.2.8 touch ext)
I partitioned the SD, choosing ext4, but when I control, it's ext3
why that???
Click to expand...
Click to collapse
maybe the CWM failed to format it with ext4 file system,
or the ROM you use failed to identify ext4 file system, some guys told me there are ROMs that don't support the ex4 yet, you may want to read your ROM specification,
or somehow the ROM need additional script to read ext4 file system properly,
recently I've tried more than 10 times partitioning my SD cards, but most of it failed in attempts,
it won't be mounted as second partition, therefore I can't use Link 2 SD properly,
My ROM is PAC 22.1.0
I've tried partition tools: Minitool, CWM 5, AParted (SDCARD Partiton Tool) app, checked the partition table with Partition Table app, trying to mount second partiton manually with Android Terminal Emulator (using "mount" command), success using CWM.
I've tried ext2, ext3, ext4 partitions, but success only with FAT32 file system,
I think in the process I've delete some media in /system partition, maybe it creates problem since Link 2 SD need to modify some files in /system partition to mount the second partition,
I tried with Lenio vQuattro, partitioning with minitool, the sd-ext was correctly partitioned as ext4, but the phone did not saw the sd-ext. The rom is done to use only ext4.
So I went back to the most recent cm 10.1 (with ext3 and int2ext+) because this is my only phone and I need it to phone
Better use mini tool partition wizard..
You can choose the type of part,like ext2 ext3 or ext4..
Sent from my C2105 using xda app-developers app
I just have a question. Is it safe to partition my sd card in clockwork mod recovery coz I have clockwork mod 5.0.2.6 and in the advanced there is an option "Partition SD Card" and if u select it there at several amounts like 246m, 400m, 1026m, 2046m. So would it work if I do it in my clockword mod recovery.
Yes it works. Creates ext3. Backup sd contents first then copy back after.
Sent from my GT-S5830
mitchst2 said:
Yes it works. Creates ext3. Backup sd contents first then copy back after.
Sent from my GT-S5830
Click to expand...
Click to collapse
Thanks for Tht but I want to create ext4 partition would it work or do I have to do it with the partition wizard.
MiniTool Partition Wizard Home Edition
Pj_Singh said:
Thanks for Tht but I want to create ext4 partition would it work or do I have to do it with the partition wizard.
Click to expand...
Click to collapse
Hi Pj_Singh!
You can create ext4 partition with MiniTool Partition Wizard Home Edition using PC.
Pj_Singh said:
Thanks for Tht but I want to create ext4 partition would it work or do I have to do it with the partition wizard.
Click to expand...
Click to collapse
Hi Pj_Singh
Is there any particular reason you want to create ext4 partition only? I mean Galaxy Ace doesn't have very great processor and ext4 is slower than ext2. Take a look at this: http://forum.xda-developers.com/showthread.php?t=800353
c2tarun said:
Hi Pj_Singh
Is there any particular reason you want to create ext4 partition only? I mean Galaxy Ace doesn't have very great processor and ext4 is slower than ext2. Take a look at this: http://forum.xda-developers.com/showthread.php?t=800353
Click to expand...
Click to collapse
Despite the fact that ext4 is slower, it is required for most of the newest rom's/kernels to work. And the ext4 is "slightly" slower, means you wont see the difference, at least not when using a phone.
Hi S5830 users (S5830 only)
I tried using TWRP and CWM to repartition my 32GB Class 10 SD card but failed, only MiniTool for Windows works, but I can't seem to use Link2SD to do an sd2ext
ROM: CM11 modded
Kernel: MA6
BachMinuetInG said:
Hi S5830 users (S5830 only)
I tried using TWRP and CWM to repartition my 32GB Class 10 SD card but failed, only MiniTool for Windows works, but I can't seem to use Link2SD to do an sd2ext
ROM: CM11 modded
Kernel: MA6
Click to expand...
Click to collapse
Can you tell me exactly what the error is? Are you able to create the mount scripts? You only have one sd-ext partition right?
mahithm said:
Can you tell me exactly what the error is? Are you able to create the mount scripts? You only have one sd-ext partition right?
Click to expand...
Click to collapse
According to MiniTool Partition Wizard, yes, I have 1 FAT32 (about 30GB) and another Ext3 partition. However, the device doesn't read it, and I cannot partition through either TWRP or CWM. I'm testing Cronmod on CM10.1 now, will update.
Sent from my GT-S5830 using XDA Premium 4 mobile app
BachMinuetInG said:
According to MiniTool Partition Wizard, yes, I have 1 FAT32 (about 30GB) and another Ext3 partition. However, the device doesn't read it, and I cannot partition through either TWRP or CWM. I'm testing Cronmod on CM10.1 now, will update.
Sent from my GT-S5830 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
TWRP or CWM should not be used to create a new ext partition if your sdcard already have another ext partition. Meaning you should have only one ext partition in your sdcard. So delete the ext3 partition and the fat32 partition, then create a single new fat32 partition on the 32BG sdcard. Now use the recovery mod to create the ext partition. That should work. Between Link2SD and CronMod, I would always go for CronMod. Then again its my opinion. Any way if you have any problem, just post here and I'll be glad to help
mahithm said:
TWRP or CWM should not be used to create a new ext partition if your sdcard already have another ext partition. Meaning you should have only one ext partition in your sdcard. So delete the ext3 partition and the fat32 partition, then create a single new fat32 partition on the 32BG sdcard. Now use the recovery mod to create the ext partition. That should work. Between Link2SD and CronMod, I would always go for CronMod. Then again its my opinion. Any way if you have any problem, just post here and I'll be glad to help
Click to expand...
Click to collapse
Is a Primary partition fine, or do I have to use a Logical partition?
EDIT: I used a Primary partition, and got this:
Partitioning SD Card...
Removing partition table...
Creating FAT32 partition...
Creating EXT partition...
E:Unable to create EXT partition.
Updating partition details...
(TWRP says 'Failed')
EDIT 2: I used a Logical partition, and got this:
E:Unable to mount '/sdcard'
Partitioning SD card...
Creating FAT32 partition...
Creating EXT partition...
E:Unable to create EXT partition.
Updating partition details...
EDIT 3: I think I might have found the problem: http://forum.xda-developers.com/showthread.php?t=1585572
I will test this and get back!
BachMinuetInG said:
Is a Primary partition fine, or do I have to use a Logical partition?
EDIT: I used a Primary partition, and got this:
Partitioning SD Card...
Removing partition table...
Creating FAT32 partition...
Creating EXT partition...
E:Unable to create EXT partition.
Updating partition details...
(TWRP says 'Failed')
EDIT 2: I used a Logical partition, and got this:
E:Unable to mount '/sdcard'
Partitioning SD card...
Creating FAT32 partition...
Creating EXT partition...
E:Unable to create EXT partition.
Updating partition details...
EDIT 3: I think I might have found the problem: http://forum.xda-developers.com/showthread.php?t=1585572
I will test this and get back!
Click to expand...
Click to collapse
If possible, can you try with CWM? Here is the link,
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I Helped
mahithm said:
If possible, can you try with CWM? Here is the link,
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I Helped
Click to expand...
Click to collapse
Tried with that, and it said
Partitioning SD Card... please wait...
Done!
(Copying my files back now, waiting to test)
BachMinuetInG said:
Tried with that, and it said
Partitioning SD Card... please wait...
Done!
(Copying my files back now, waiting to test)
Click to expand...
Click to collapse
That's pretty much it. Fingers crossed. Waiting for your reply
mahithm said:
That's pretty much it. Fingers crossed. Waiting for your reply
Click to expand...
Click to collapse
Steps taken: Copied files directly through Cronmod ZIP (INt2EXtV2+) to respective places (i.e. /system/etc/init.d/) using FX File Explorer, rebooted, and it BOOTS!
Hang on a minute, let me check my disk space, it still reads '16MB free, 162MB used'. is that normal? The script has already been put into the- Wait a minute, the space just increased to 24MB free, 154MB used.
Oh my gosh. Link2SD is saying that there is no second partition.
Apparently the other init.d files are rwxr-xr-x, root, shell, but 40int2ext is rwxr-xr-x, root, root. Is that normal too?
P.S. Sorry, my Shift key is malfunctioning
EDIT: I'm manually flashing Cronmod again, instead of copying directly, as TWRP and CWM 6 didn't allow. CWM 5 works like a charm.
EDIT 2: Still 15MB free *Cries*
BachMinuetInG said:
Steps taken: Copied files directly through Cronmod ZIP (INt2EXtV2+) to respective places (i.e. /system/etc/init.d/) using FX File Explorer, rebooted, and it BOOTS!
Hang on a minute, let me check my disk space, it still reads '16MB free, 162MB used'. is that normal? The script has already been put into the- Wait a minute, the space just increased to 24MB free, 154MB used.
Apparently the other init.d files are rwxr-xr-x, root, shell, but 40int2ext is rwxr-xr-x, root, root. Is that normal too?
P.S. Sorry, my Shift key is malfunctioning
Click to expand...
Click to collapse
BTW what rom are you using now?
---------- Post added at 12:18 PM ---------- Previous post was at 11:57 AM ----------
BachMinuetInG said:
Steps taken: Copied files directly through Cronmod ZIP (INt2EXtV2+) to respective places (i.e. /system/etc/init.d/) using FX File Explorer, rebooted, and it BOOTS!
Hang on a minute, let me check my disk space, it still reads '16MB free, 162MB used'. is that normal? The script has already been put into the- Wait a minute, the space just increased to 24MB free, 154MB used.
Oh my gosh. Link2SD is saying that there is no second partition.
Apparently the other init.d files are rwxr-xr-x, root, shell, but 40int2ext is rwxr-xr-x, root, root. Is that normal too?
P.S. Sorry, my Shift key is malfunctioning
EDIT: I'm manually flashing Cronmod again, instead of copying directly, as TWRP and CWM 6 didn't allow. CWM 5 works like a charm.
EDIT 2: Still 15MB free *Cries*
Click to expand...
Click to collapse
You should know that CronMod and Link2SD doesn't work together. Since CronMod is present, Link2sd can't find the ext partition. What is the size of your ext partition. What rom are you using now? For every 512MB sd-ext partition you need a 100MB space on /data. So please limit your sd-ext patition to 1GB max.
mahithm said:
BTW what rom are you using now?
---------- Post added at 12:18 PM ---------- Previous post was at 11:57 AM ----------
You should know that CronMod and Link2SD doesn't work together. Since CronMod is present, Link2sd can't find the ext partition. What is the size of your ext partition. What rom are you using now? For every 512MB sd-ext partition you need a 100MB space on /data. So please limit your sd-ext patition to 1GB max.
Click to expand...
Click to collapse
I'm using Maclaw's CM10.1. I don't use CronMod and Link2SD together, when i figured out that CronMod didn't work I tried to use Link2SD. As for the /data, is it 100MB free?
BachMinuetInG said:
I'm using Maclaw's CM10.1. I don't use CronMod and Link2SD together, when i figured out that CronMod didn't work I tried to use Link2SD. As for the /data, is it 100MB free?
Click to expand...
Click to collapse
For our Samsung Galaxy Ace S5830, we have an internal memory of 150MB. So your ext partition size should not be more than 1GB for CronMod to work. BTW what is the size of your ext partition?
mahithm said:
For our Samsung Galaxy Ace S5830, we have an internal memory of 150MB. So your ext partition size should not be more than 1GB for CronMod to work. BTW what is the size of your ext partition?
Click to expand...
Click to collapse
If I'm not wrong... I chose 1024MB (1GB) at the selection screen.
BachMinuetInG said:
If I'm not wrong... I chose 1024MB (1GB) at the selection screen.
Click to expand...
Click to collapse
As a last resort, try to reflash this rom. Make sure to backup all the data. Take the rom file, extract it, put 40int2ext file inside /system/etc/init.d/ and then compress it back. Now go to CWM, do "Wipe Data/ Factory reset", "Wipe cache partitions", Mount & Storage> "Format /system" and "Format /sd-ext", Advanced> "Wipe Dalvik Cache" and "Wipe Battery Stats". Now reflash the custom rom. This should pretty much solve it. Restore all the necessary data.
mahithm said:
As a last resort, try to reflash this rom. Make sure to backup all the data. Take the rom file, extract it, put 40int2ext file inside /system/etc/init.d/ and then compress it back. Now go to CWM, do "Wipe Data/ Factory reset", "Wipe cache partitions", Mount & Storage> "Format /system" and "Format /sd-ext", Advanced> "Wipe Dalvik Cache" and "Wipe Battery Stats". Now reflash the custom rom. This should pretty solve it. Restore all the necessary data.
Click to expand...
Click to collapse
Thanks for your help I'll get back to you as soon as I've tried it :good::highfive:
BachMinuetInG said:
Thanks for your help I'll get back to you as soon as I've tried it :good::highfive:
Click to expand...
Click to collapse
No problem :good:
mahithm said:
No problem :good:
Click to expand...
Click to collapse
I've tried that already, and the device went into a bootloop. However, I used GParted to partition 777MB sd-ext, and the rest FAT32, and it boot up after flashing CM10.1 > GApps > CronMod INT2EXT4
The only problem was that the memory remained the same, and Partition info showed /sd-ext (EXT 0.00B/0.00B)
EDIT: For some reason sd-ext doesn't mount, but formats perfectly.
BachMinuetInG said:
I've tried that already, and the device went into a bootloop. However, I used GParted to partition 777MB sd-ext, and the rest FAT32, and it boot up after flashing CM10.1 > GApps > CronMod INT2EXT4
The only problem was that the memory remained the same, and Partition info showed /sd-ext (EXT 0.00B/0.00B)
EDIT: For some reason sd-ext doesn't mount, but formats perfectly.
Click to expand...
Click to collapse
Have you tried flashing the CronMod from CWM? Can you give it a try? Also try to use INT2EXT+ as it is much more stable than others. Hope I Helped
mahithm said:
Have you tried flashing the CronMod from CWM? Can you give it a try?
Click to expand...
Click to collapse
When I flash it from CWM sometimes it somehow finishes without incident, but the file doesn't get copied.
BachMinuetInG said:
When I flash it from CWM sometimes it somehow finishes without incident, but the file doesn't get copied.
Click to expand...
Click to collapse
Try to use INT2EXT+ as it is much more stable than others. Also you might need to mount /system from CWM before flashing if its not getting copied.