Database Develop

My voice search FC's on boot please help!

hey guys running modaco 2.2, and my voice search FC's everytime I try to use it.
I use the VS almost daily, so today was a bit harder than normal without it .
So can anyone help me please? It fc's whenever I open it in any application.

I have the same issue. No idea what happened. No idea how to fix it.

sierpinski13 said:
I have the same issue. No idea what happened. No idea how to fix it.
Click to expand...
Click to collapse
I think i figured it out Modaco doesn't support it in the rom I went over tried out Gumbo's I like it a bit better than modaco's cause it doesn't feel as stock as modacos. it is based on his . Maybe there's an apk to enable it floating around somewhere.
http://forum.androidcentral.com/sprint-htc-hero-roms/4361-hero-rom-gumbo-rom-project-beta.html

Ya that sounds right. It started as soon as I updated to 2.2. Hopefully there will be a fix or something soon.

use fresh's kitchen to clear both the boot and dalvik cache. voila, problem solved.

chococrazy said:
I think i figured it out Modaco doesn't support it in the rom I went over tried out Gumbo's I like it a bit better than modaco's cause it doesn't feel as stock as modacos. it is based on his . Maybe there's an apk to enable it floating around somewhere.
http://forum.androidcentral.com/sprint-htc-hero-roms/4361-hero-rom-gumbo-rom-project-beta.html
Click to expand...
Click to collapse
if you have voice search then you're missing the libspeech.so file in the lib folder, in system
go to you cmd and check to see if your libsppeech.so file is in there if not then push the file back in and reboot.
attached is two zip either push the file on your own or the sign zip put it in your sdk card and install in form recovery like you would to a rom.
good luck

Axura/Perception Black Keyboard?

This may or may not be an easy question to answer but I am looking for the default black keyboard that is used in the Axura and I think Perception ROMs. I flashed both of those this week but am now back on Cog and I'd like to give that keyboard a shot and see if it will even work. It was a semi-transparent black keyboard I believe that had blue pop-up letters when pressed. Could I be anymore vague?
I'd just rather not flash back to those if I don't have to.
Thanks for the help!

Did you try to unzip the roms and pull the keyboard out of them? I dont know if it would also be part of the framework but its worth a shot.
This is my captivate. There are many like it but this one is mine.

I think it's MultiTouch Keyboard but idk where to find it for you sorry.

It's this one.

majinzen said:
It's this one.
Click to expand...
Click to collapse
That does seem to look like the one. For whatever reason I can't get it installed on Cog 2.3B6. I'm guessing because it's not an i9000 based ROM like Axura?
I did try extracting the other ROMS and looking in system/app and the only ones I see in there are AxT9IME.apk, LatinIME.apk, and Keyboard-HTC.apk. I already have the HTC_IME MOD keyboard installed and when I tried installing the Keyboard-HTC.apk, it installed as the same HTC_IME keyboard with white keys. I also tried the Droid Multitouch keyboard which is close but still not what I'm looking for.
Strange.

You need to uninstall the LatinIME.apk (stock android) keyboard. This one needs to replace it. Can't have both at the same time for some reason. Here is the original thread.
http://forum.xda-developers.com/showthread.php?t=754948

I tried to install it from the link above and had some issues. I got it fixed and here is how. (Granted I am on Perc.7 though). First I tried jist to copy the .apk provided for the multitouch but got force closes even after a reboot. I did rename the latiname.apk to latiname.apk.old and rebooted. Next I installed the samsung keyboard apk and lib file since I had issues with the force closes. This way I had a working keyboard. Next I used root explorer to again move the wjdblue apk and rebooted. Came back up and this time it showed both the samsung and multitouch keybaords so i thought I was good. Then I selected the multitouch keyboard bit started getting foce closes again. I then switched back to the samsung keyboard. I then went back into the extra lcted.folder from the link above, went into the lib folder, copied the libjmi_latinime.apk and moved it to/ system/lib and pasted, said yes to overwrite the current file, rebooted and wahhlllaaa I am using it right now. So it must need/know the exact lib file to match it. Hope this helps. If you need both the apk and lib file shoot me a pm and I will upload them to dropbox for you. Or just use root explorer and extract the zip file previous poster posted and grab them.
Cog'd Perception or Cog'd 2.3b6 depending on my need for flash addiction

ok! so i took the info that RockRatt gave and made the apk to a zip file and installed with cwm and working on my phone with the green one. I didnt test the blue one tho. all the credit should go to RockRatt without his post i would of never thought of doing this.
(the blue can now be installed with cwm)

dfuse06 said:
ok! so i took the info that RockRatt gave and made the apk to a zip file and installed with cwm and working on my phone with the green one. I didnt test the blue one tho. all the credit should go to RockRatt without his post i would of never thought of doing this.
Click to expand...
Click to collapse
I tried the blue one as an update.zip and got "Installation Aborted" so I just manually copied them over, rebooted and it worked!
Thanks so much. This is why I love this community.

Escape311 said:
I tried the blue one as an update.zip and got "Installation Aborted" so I just manually copied them over, rebooted and it worked!
Thanks so much. This is why I love this community.
Click to expand...
Click to collapse
I just rebooted into cwm recovery.Click on install from sd card.Then choose zip file.Install blue\green-sign.zip wait until done.Then click go back.Then reboot now.
that is how I installed note I've only installed the green one this way.

thanks alot!

Still not working for me
Sent from my SAMSUNG-SGH-I897 using XDA App

dfuse06 said:
I just rebooted into cwm recovery.Click on install from sd card.Then choose zip file.Install blue\green-sign.zip wait until done.Then click go back.Then reboot now.
that is how I installed note I've only installed the green one this way.
Click to expand...
Click to collapse
Essentially the same process. I did not try the green.zip.

Escape311 said:
Essentially the same process. I did not try the green.zip.
Click to expand...
Click to collapse
i'll try the blue one.i have flashed the green one a lot.

dfuse06 said:
i'll try the blue one.i have flashed the green one a lot.
Click to expand...
Click to collapse
Okay.So The blue is not working in cwm. sorry for posting guys.I know you can flash the green in cwm.

dfuse06 said:
Okay.So The blue is not working in cwm. sorry for posting guys.I know you can flash the green in cwm.
Click to expand...
Click to collapse
It's all good. I appreciate you posting it so I could just pull those files out and replace them manually.

Escape311 said:
It's all good. I appreciate you posting it so I could just pull those files out and replace them manually.
Click to expand...
Click to collapse
Yeah I just dated that the blue you can't install with cwm.I'm thinking that i forgot to do something with the blue one when i made the apk to a zip i'm going to work on it again I'm using perception 7 non-oc\uv with the darkness theme and the black and green key pad.It looks pretty dope.

Blue Multi-touch keyboard
You can now install with cwm. I fixed it sorry guys . The updated zip file is on the first page I replaced a good one with the bad one.

[HOW TO]Easy Way to change Framework to Add Battery %

I have tested this with DHD builds only but I'm sure it works with any build as long as you have adb intsalled.
1st. Download and unzip the attached file
2nd. Add the Framework-res.apk of your choice to the extracted folder
3rd. Plug your phone into your computer with USB debug on and Charge only selected.
4th. Click Change framework in the folder that you extracted and added the framework to.
This will cause your phone to reboot. Now you will have to re-enter your Google and HTC accounts.
Link to different battery mods and Skins>>http://forum.xda-developers.com/showthread.php?t=801928

hey thank you I'm gonna use this next time I change the file. Probably I will still have to make it bootloop...
It's funny cause I've tried everything that suppopsedly works for everyone else, such as copying and pasting with root explorer, or using droid explorer but it won't connect properly. Then to top it all off adb push can't push unless its bootlooping. I feel like I just can't win sometimes...

patmorris said:
hey thank you I'm gonna use this next time I change the file. Probably I will still have to make it bootloop...
It's funny cause I've tried everything that suppopsedly works for everyone else, such as copying and pasting with root explorer, or using droid explorer but it won't connect properly. Then to top it all off adb push can't push unless its bootlooping. I feel like I just can't win sometimes...
Click to expand...
Click to collapse
this will work and you will have no Bootloops i have done it several times without bootloops

Hey this worked perfectly. But I just flashed to a different ROM too. On the other build I was using I issued the same adb commands in the prompt and definately got completely different results. Thanks for this tool.
Edit:
Your tool works about half of the time, but its not its fault. adb works for me only about half the time. But for some reason now I get millions of FCs after I replace framework-res.apk.

doesn't work 4 me

criszz said:
doesn't work 4 me
Click to expand...
Click to collapse
What was the problem? I have used this on 4 builds and have had no problem.

Just tried it and got boot loop. Was trying to change the theme in my Coredroid clockworkmod build.

I just use this tool with my Coredroid clockworkmod build and it worked PERFECT. You must have done something wrong here is a couple of pictures for proof.
P.S. With this build I didn't even have to re-input my Google and HTC accounts

Where did you get that battery mod from, Evo section?

mattfmartin said:
Where did you get that battery mod from, Evo section?
Click to expand...
Click to collapse
The mod came from the DHD forums heres a link
http://forum.xda-developers.com/showthread.php?t=801928

Cool, thanks;p

anyone tried this on mdj ginger builds?
THanks!

xxljmzlxx said:
anyone tried this on mdj ginger builds?
THanks!
Click to expand...
Click to collapse
I tried it yesterday and it worked perfect!

JDM_HD2 said:
I tried it yesterday and it worked perfect!
Click to expand...
Click to collapse
where did you get ur ginger framework from? I'm assuming it won't be compatible with DHD framework

xxljmzlxx said:
where did you get ur ginger framework from? I'm assuming it won't be compatible with DHD framework
Click to expand...
Click to collapse
I got it from this page and i have no idea if it would be compatible with DHD or not.
http://forum.xda-developers.com/showthread.php?t=877777&page=1349
but you can also check out the page below and scroll down to post 6 for DesireHD and if you have an DHD gingerbread scroll down to post 7
http://forum.xda-developers.com/showthread.php?t=801928

[Q] NFC, SmartTags, and a screen off/ locked Xperia Z

Hey there,
I just bought some SmartTags for my new Xperia Z, and they work very effectively, but there is one big thing that compromises the whole idea of automation. Obviously, you cannot use them when the screen is off or locked. So I have to hit the power button, enter my unlock pattern, approach the tag, hit the power button again. I guess this is for security measures, but is there any way to make them work like that?
dEM

demonizator said:
Hey there,
I just bought some SmartTags for my new Xperia Z, and they work very effectively, but there is one big thing that compromises the whole idea of automation. Obviously, you cannot use them when the screen is off or locked. So I have to hit the power button, enter my unlock pattern, approach the tag, hit the power button again. I guess this is for security measures, but is there any way to make them work like that?
dEM
Click to expand...
Click to collapse
This would be great if someone can modify the NFC.apk file (If I am correct) to run even when the screen is off. This was done for the Samsung Galaxy Note 2 and Galaxy S3 previously. Much more convenient to tap without having to press the power on button.

arvin2212 said:
This would be great if someone can modify the NFC.apk file (If I am correct) to run even when the screen is off. This was done for the Samsung Galaxy Note 2 and Galaxy S3 previously. Much more convenient to tap without having to press the power on button.
Click to expand...
Click to collapse
Convenient maybe, but a lot less secure.

defsix said:
Convenient maybe, but a lot less secure.
Click to expand...
Click to collapse
For sure, but why not let us decide convenience or security. It'd be great if someone manages to give us this option for the Z too.

Root Access is just answer!
in NFC Hacking forum i talked about turn on/off automation. and answer is just Root access unfortunately.

Well, we have Root access, don't we?

Tom Fagerland said:
Well, we have Root access, don't we?
Click to expand...
Click to collapse
Root, and then what?

Tom Fagerland said:
Well, we have Root access, don't we?
Click to expand...
Click to collapse
i don know if u r root user or not.
normally u r DON'T have root access.
and if root ur phone, ur warranty will void.

x102x96x said:
i don know if u r root user or not.
normally u r DON'T have root access.
and if root ur phone, ur warranty will void.
Click to expand...
Click to collapse
Rooting does not void warranties. User damage to electrical devices voids warranty. I have rooted and installed custom Roms on phones for years and even sent back phones i've bricked for warranty replacement and they've always been repared/replaced on warranty.
If you cause damage to your own device through user error, rooted or otherwise, THAT will void your warranty.
As for NFC smart tags, if you can't program them to work with only your phone, so that you don't have to turn on the screen, then they're not very smart are they. I am glad I read this thread before purchasing any.

x102x96x said:
Root Access is just answer!
in NFC Hacking forum i talked about turn on/off automation. and answer is just Root access unfortunately.
Click to expand...
Click to collapse
Can you point us in the direction of said post?

rjbathgate said:
Can you point us in the direction of said post?
Click to expand...
Click to collapse
i had same question
i researched and asked
and this my question in xda;
http://forum.xda-developers.com/showthread.php?t=2230417
:good:

did anyone manage to figure out how to mod the apk to get nfc to work with the screen off?

Sadly, NO. I know that it is possible in galaxy S3 MOD.
this the mod for s3 if someone can make it for Z

neoxkid said:
Sadly, NO. I know that it is possible in galaxy S3 MOD.
this the mod for s3 if someone can make it for Z
Click to expand...
Click to collapse
The developer of ROMAUR once posted the .apk file that enables off screen nfc. This worked for the 434 firmware. He removed the mods from his main thread, I am not sure why. Perhaps someone could approach him and request for the nfc mod.

arvin2212 said:
The developer of ROMAUR once posted the .apk file that enables off screen nfc. This worked for the 434 firmware. He removed the mods from his main thread, I am not sure why. Perhaps someone could approach him and request for the nfc mod.
Click to expand...
Click to collapse
yeah i just asked him if its still in the rom and it is. According to some of the posts in his thread, there are still issues with it such as the icon not showing up. I had a look at the smali files for the nfc.apk to see if I could understand the changes he has done and compared it to my own but its significantly different. The nfc mods on other phones only change the code in one of the files (nfcservice.smali), whereas the romaur one changes many of them.
Im not a developer by any means (decompiling was an achievement for me!) so I'm too scared to try and mod this. Hopefully someone can pick this up for the xperia z...

NFCMod
I either need a link to the ROMs you are using (especially @dopee who pulled me here) or the Nfc.apk and all framework*.apk of them.
Then I would give it a try.

StephanSch said:
I either need a link to the ROMs you are using (especially @dopee who pulled me here) or the Nfc.apk and all framework*.apk of them.
Then I would give it a try.
Click to expand...
Click to collapse
Thanks heaps mate really appreciate it!!
I have uploaded the NFC.apk, framework-res.apk and semcgenericuxpres.apk to dev-host (http://d-h.st/mgC).
I am using a rooted 253 stock rom, heres the link (http://forum.xda-developers.com/showthread.php?t=2282415)
The latest stock rom is 307, I don't think the NFC apk changed, heres the link to that if you wanted it. (http://forum.xda-developers.com/showthread.php?t=2313369)
Let me know if you need anything else.

dopeee said:
Thanks heaps mate really appreciate it!!
I have uploaded the NFC.apk, framework-res.apk and semcgenericuxpres.apk to dev-host (http://d-h.st/mgC).
I am using a rooted 253 stock rom, heres the link (http://forum.xda-developers.com/showthread.php?t=2282415)
The latest stock rom is 307, I don't think the NFC apk changed, heres the link to that if you wanted it. (http://forum.xda-developers.com/showthread.php?t=2313369)
Let me know if you need anything else.
Click to expand...
Click to collapse
Because I need deodexed apk I took this: http://forum.xda-developers.com/showthread.php?t=2325471
Give it a try:
Edit: moved to thread

Wow that was quick!
I tried to install this 3 ways (sorry I'm sorta new at this so may not have done it correctly).
1. ADB but I got a permission denied when trying to remount / push. Do I need to have an unlocked bootloader and install a custom (unsecure) kernel?
2. I created a flashable zip. It went in ok, but when I rebooted, my NFC options disappeared. I restored to get it back.
3. I tried to just use root explorer and copied it to /system/app and ensured it had correct permissions. I deleted the nfc.odex file as well. After reboot, my phone tried to repair itself (triangle with tools icon) and then when it booted my NFC options disappeared.
Since you got it from a leaked 4.2.2 rom do you think that is why it is not working (I am on 4.1.2)? Or am I doing something wrong?
I was just using the lockscreen apk version.

dopeee said:
Wow that was quick!
I tried to install this 3 ways (sorry I'm sorta new at this so may not have done it correctly).
1. ADB but I got a permission denied when trying to remount / push. Do I need to have an unlocked bootloader and install a custom (unsecure) kernel?
2. I created a flashable zip. It went in ok, but when I rebooted, my NFC options disappeared. I restored to get it back.
3. I tried to just use root explorer and copied it to /system/app and ensured it had correct permissions. I deleted the nfc.odex file as well. After reboot, my phone tried to repair itself (triangle with tools icon) and then when it booted my NFC options disappeared.
Since you got it from a leaked 4.2.2 rom do you think that is why it is not working (I am on 4.1.2)? Or am I doing something wrong?
I was just using the lockscreen apk version.
Click to expand...
Click to collapse
If you're not on 4.2.2 it will probably not work. If you can give me a deodexed version (or link) of yours I'll take that too
Sent from my HTC One using xda premium

AOSP lock screen on RaptorRom

Hey everyone. Just decided to post this for anyone using the wonderful RaptorRom by LarryBoyG that would like AOSP lock screen for whatever reason.
Get a root enabled file manager such as ES File Manager
Go into system/priv-app
Rename HTClockscreen.apk to HTClockscreen.apk.bac
Rename HTClockscreen.odex to HTClockscreen.odex.bac
Reboot system
There you go aosp lock screen

qwerty6532 said:
Hey everyone. Just decided to post this for anyone using the wonderful RaptorRom by LarryBoyG that would like AOSP lock screen for whatever reason.
Get a root enabled file manager such as ES File Manager
Go into system/priv-app
Rename HTClockscreen.apk to HTClockscreen.apk.bac
Rename HTClockscreen.odex to HTClockscreen.odex.bac
Reboot system
There you go aosp lock screen
Click to expand...
Click to collapse
Only Raptor?

It may work for other sense based Roms as well. Only confirmed on raptor.

tried it and got a bootloop.

bootloop
icy_gt said:
tried it and got a bootloop.
Click to expand...
Click to collapse
hmmm..
Are you on RaptorRom?
I had no trouble doing it. It just booted right up with the AOSP lockscreen.

Anyone else?
qwerty6532 said:
hmmm..
Are you on RaptorRom?
I had no trouble doing it. It just booted right up with the AOSP lockscreen.
Click to expand...
Click to collapse
Can anyone else say if this worked?

Forgot a step
http://htc-one.wonderhowto.com/how-to/activate-hidden-aosp-lock-screen-your-htc-one-m8-0154651/
Look at step 2 it will show you what to after the renaming. I did this too maybe that's why it worked for me?

qwerty6532 said:
http://htc-one.wonderhowto.com/how-to/activate-hidden-aosp-lock-screen-your-htc-one-m8-0154651/
Look at step 2 it will show you what to after the renaming. I did this too maybe that's why it worked for me?
Click to expand...
Click to collapse
Damn, would love to have this. Got all the way to the end but "file doesnt exist" If it was there, I probably got rid of it somewhere down the line. Thanks though.

set up wizard
Here ya go. It goes in system/app

qwerty6532 said:
Here ya go. It goes in system/app
Click to expand...
Click to collapse
Badass....Thanks man.:good::good::good:

no problem
Let me know how it goes

qwerty6532 said:
Let me know how it goes
Click to expand...
Click to collapse
I threw it in there but wouldn't install. Said there already was a app with same name. Looks like I had it frozen with TiBu. Gonna try in morning. Working overnites nowadays. I'll let you know when I get back to computer

Did you ever get a chance to try?

qwerty6532 said:
Did you ever get a chance to try?
Click to expand...
Click to collapse
I am waiting for my wife to bring back home my cable. We have two but apparently with the one thats home I cant get adb to recognise my device. She took mine to work yesterday. Im sure thats all it is as I got in the other day. Kinda pissed but,,,,Ill for sure report back this evening when I give it a go. Very hopeful. Thanks

What are we gunna do with the women.... haha

Well thought I had it. Got all the way thru till the end after changing file names, running file and all but after all is said and done, nothing changes. Yes, I do have Lockscreen widgets ticked under settings-security. Bummer for sure. Thanks much for the help and guidance buddy.

Did you reboot right after changing file names?

qwerty6532 said:
Did you reboot right after changing file names?
Click to expand...
Click to collapse
I did, but that was a couple of days ago. Also, I noticed I actually have 3 files
1)HtcLockScreen.apk.bac (the ? kind)
2)HtcLockScreen.odex.bac (the ? kind)
3HtcLockScreen.apk_bac (the ? kind)
the first one (apk) I changed to.bac
second on I changed odex.bac
the last one (#3) was there like that and I left it as is
Not sure why and not sure if I should get rid of one and if so which one. Hmm
Maybe I will switch back, and try again from the beginning. Bummer

CSP III said:
I did, but that was a couple of days ago. Also, I noticed I actually have 3 files
1)HtcLockScreen.apk.bac (the ? kind)
2)HtcLockScreen.odex.bac (the ? kind)
3HtcLockScreen.apk_bac (the ? kind)
the first one (apk) I changed to.bac
second on I changed odex.bac
the last one (#3) was there like that and I left it as is
Not sure why and not sure if I should get rid of one and if so which one. Hmm
Maybe I will switch back, and try again from the beginning. Bummer
Click to expand...
Click to collapse
Did you ever back it up with titanium maybe?
When you rebooted 3 days ago did you have the AOSP lockscreen but with no widget support? You should have.
try deleting the _bac one
and running the setupwizrd again?

qwerty6532 said:
Did you ever back it up with titanium maybe?
When you rebooted 3 days ago did you have the AOSP lockscreen but with no widget support? You should have.
try deleting the _bac one
and running the setupwizrd again?
Click to expand...
Click to collapse
NO, no change the other day.
Im going to try what you suggest. After remnaming files, reboot then connect to computer, run commands laid out in the article and Bam I hope.
Now earlier, the setup wizard started but I got a "google servers failed, blah blah notice" I tried several times again after and never could get the setup wizard to start again. I know Im close, I can feel it.
So after the wizard runs, then what......reboot or should the lockscreen just change. and how do I go about adding the widgets to the lockscreen or are they just on by default?
Appreciate you sticking with me buddy, either way it turns out.:good::good::good: