Database Develop

HTC Vivid Fastboot OEM Commands

Can be achieved by using the command fastboot oem ? while Vivid is in Fastboot USB Mode
Commands are case sensitive!!!
you can get fastboot by using the Android SDK on Mac / PC / or Linux
(bootloader) command list
(bootloader) get_identifier_token
(bootloader) checkSbl1
(bootloader) checkHWSecurity
(bootloader) checkKeycardID
(bootloader) enter
(bootloader) keytest
(bootloader) heap
(bootloader) boot
(bootloader) reset
(bootloader) powerdown
(bootloader) rebootRUU
(bootloader) heap_test
(bootloader) rtask
(bootloader) task
(bootloader) enableqxdm
(bootloader) gencheckpt
(bootloader) readpid
(bootloader) writepid
(bootloader) readcid
(bootloader) writecid
(bootloader) readimei
(bootloader) writeimei
(bootloader) readsecureflag
(bootloader) writesecureflag
(bootloader) lock
(bootloader) list_partition_emmc
(bootloader) load_emmc
(bootloader) check_emmc
(bootloader) check_emmc_mid
(bootloader) read_mmc
(bootloader) load_modem_emmc
(bootloader) get_wp_info_emmc
(bootloader) send_wp_info_emmc
(bootloader) get_ext_csd_emmc
(bootloader) get_sector_info_emmc
OKAY [ 0.043s]
finished. total time: 0.043s

Dead

Hello,
so my dads mi5 fried itself and if i can fix it i get to keep it. when i plug it in there is no charging led showing up and it wont power up at all, nor is it being detected by my pc.
Thanks.

twosaltyy said:
Hello,
so my dads mi5 fried itself and if i can fix it i get to keep it. when i plug it in there is no charging led showing up and it wont power up at all, nor is it being detected by my pc.
Thanks.
Click to expand...
Click to collapse
The chance of it "frying itself" is probably very low. The first thing I'd do is charge it, plug into a PC and hold the power button to see if the phone is turning on.
You're best trying to boot it into fastboot/recovery to ensure that the phone doesn't just charge using the usb port.

andythedev said:
The chance of it "frying itself" is probably very low. The first thing I'd do is charge it, plug into a PC and hold the power button to see if the phone is turning on.
You're best trying to boot it into fastboot/recovery to ensure that the phone doesn't just charge using the usb port.
Click to expand...
Click to collapse
it doesnt work at all. no power.
just to test it isnt the display though what are the keys to press for fastboot?

Hold power and volume down for a while. It might take some time to get right. Also you can try recovery which is power and volume up for a few seconds also.

andythedev said:
Hold power and volume down for a while. It might take some time to get right. Also you can try recovery which is power and volume up for a few seconds also.
Click to expand...
Click to collapse
i sucessfully got it into fastboot and its in edl mode now.

(bootloader) version:
(bootloader) token:0um+/KehGs8g+983YWtlieoD
(bootloader) battery-soc-ok:yes
(bootloader) battery-voltage:4029000
(bootloader) variant:A2 eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) display-panel:
(bootloader) off-mode-charge:0
(bootloader) charger-screen-enabled:0
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x10000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x640bfb000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xc0000000
(bootloader) board_version:2.3.0
(bootloader) platform_subtype:0000
(bootloader) platform_hw:0020
(bootloader) baseband:0000
(bootloader) target:10008
(bootloader) platform_version:30001
(bootloader) platform:00f6
(bootloader) serialno: (lol no serial for you)
(bootloader) kernel:lk
(bootloader) product:MSM8996
is it normal for my getvar all to show all of this ?

twosaltyy said:
(bootloader) version:
(bootloader) token:0um+/KehGs8g+983YWtlieoD
(bootloader) battery-soc-ok:yes
(bootloader) battery-voltage:4029000
(bootloader) variant:A2 eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) display-panel:
(bootloader) off-mode-charge:0
(bootloader) charger-screen-enabled:0
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x10000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x640bfb000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xc0000000
(bootloader) board_version:2.3.0
(bootloader) platform_subtype:0000
(bootloader) platform_hw:0020
(bootloader) baseband:0000
(bootloader) target:10008
(bootloader) platform_version:30001
(bootloader) platform:00f6
(bootloader) serialno: (lol no serial for you)
(bootloader) kernel:lk
(bootloader) product:MSM8996
is it normal for my getvar all to show all of this ?
Click to expand...
Click to collapse
What is it that you think is wrong? So the display is broken?

andythedev said:
What is it that you think is wrong? So the display is broken?
Click to expand...
Click to collapse
im not sure. thats why im asking for help

Unable to boot with other image with fastboot

Hi there,
I would like to root my Nokia 8 phone as it went out of warranty. I am new to deep Android hacks so I am basically following the guide: How to root your Nokia 8. My bootloader is unlocked with the official procedure. The next step is to boot with a TWRP or a prerooted image and install Magisk.
Unfortunately when I use the fastboot utility, the loading is done corectly and the phone reboots but then gets stuck on the "Powered by Android" splashscreen. This is occuring with both twrp-3.2.3-0-NB1.img and twrp-3.2.3-1-NB1.img
Here is the content of "fastboot getvar all" if that's relevant:
Code:
(bootloader) unlocked:yes
(bootloader) off-mode-charge:1
(bootloader) charger-screen-enabled:1
(bootloader) battery-soc-ok:yes
(bootloader) battery-voltage:3792
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) variant:MSM UFS
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0xCEC456000
(bootloader) partition-type:system_b:ext4
(bootloader) partition-size:system_b: 0xE0000000
(bootloader) has-slot:modem:yes
(bootloader) has-slot:system:yes
(bootloader) current-slot:b
(bootloader) has-slot:boot:yes
(bootloader) slot-retry-count:b:5
(bootloader) slot-unbootable:b:no
(bootloader) slot-successful:b:yes
(bootloader) slot-retry-count:a:0
(bootloader) slot-unbootable:a:no
(bootloader) slot-successful:a:yes
(bootloader) slot-count:2
(bootloader) slot-suffixes:_a,_b,
(bootloader) secure:yes
(bootloader) serialno:NB1GASxxxxxxxxxxx
(bootloader) product:QC_Reference_Phone
(bootloader) max-download-size:0x20000000
(bootloader) kernel:uefi
(bootloader) version:0.0
Has someone got the same error and solved it? Is there any way to print some debug information during the booting step?
Thanks,
MatPy

OK, I found an answer there: https://tmsp.io/fs/xda/nb1/README.txt
Temporary booting:
As of NB1-488G-0-00WW-B01 the command "fastboot boot" is broken and does
not work like it should. It will lock you in the "Powered by Android"
screen without actually booting the image you supplied. To exit the screen,
please do "fastboot reboot" and then flash the image you wanted to boot to
your active boot partition.
Click to expand...
Click to collapse
So you can't actually use TWRP without installing it with a up-to-date firmware. Why the Rooting Guide is not updated with this information? This isue is old as it appeared with the 2018-08 security patch.

MatPy said:
Hi there,
I would like to root my Nokia 8 phone as it went out of warranty. I am new to deep Android hacks so I am basically following the guide: How to root your Nokia 8. My bootloader is unlocked with the official procedure. The next step is to boot with a TWRP or a prerooted image and install Magisk.
Unfortunately when I use the fastboot utility, the loading is done corectly and the phone reboots but then gets stuck on the "Powered by Android" splashscreen. This is occuring with both twrp-3.2.3-0-NB1.img and twrp-3.2.3-1-NB1.img
Here is the content of "fastboot getvar all" if that's relevant:
Code:
(bootloader) unlocked:yes
(bootloader) off-mode-charge:1
(bootloader) charger-screen-enabled:1
(bootloader) battery-soc-ok:yes
(bootloader) battery-voltage:3792
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) variant:MSM UFS
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0xCEC456000
(bootloader) partition-type:system_b:ext4
(bootloader) partition-size:system_b: 0xE0000000
(bootloader) has-slot:modem:yes
(bootloader) has-slot:system:yes
(bootloader) current-slot:b
(bootloader) has-slot:boot:yes
(bootloader) slot-retry-count:b:5
(bootloader) slot-unbootable:b:no
(bootloader) slot-successful:b:yes
(bootloader) slot-retry-count:a:0
(bootloader) slot-unbootable:a:no
(bootloader) slot-successful:a:yes
(bootloader) slot-count:2
(bootloader) slot-suffixes:_a,_b,
(bootloader) secure:yes
(bootloader) serialno:NB1GASxxxxxxxxxxx
(bootloader) product:QC_Reference_Phone
(bootloader) max-download-size:0x20000000
(bootloader) kernel:uefi
(bootloader) version:0.0
Has someone got the same error and solved it? Is there any way to print some debug information during the booting step?
Thanks,
MatPy
Click to expand...
Click to collapse
The only way to install the offical TWRP on Android 9 is to flash TWRP to boot slot B then install TWRP zip for both slots so slot A will receive TWRP. the only thing left is to switch back to slot A.

Help needed for installing stock ROM on HTC Desire C

Hello friends
Past few days i've been trying everything to install the stock ROM on my HTC Desire C
Since it's worth a lot for me, I really need the phone to be working
The problem began when I decided to install custom ROM on it
I unlocked the bootlocker and flash TWRP
But when I tried to install the cm-12.1-20150617-UNOFFICIAL-golfu.zip, it finished successfully but never booted up properly
So i thought it might be a problem with the version of the custom rom itself
Then I tried every version from 12 to 10, none of them worked
So i thought "Hell with these custom roms, I just want the stock rom"
And it was at that moment that I realized it's not like samsung phones in which you just put some files inside Odin and click install
There are some `exe` files. So I downloaded some of them from the internet (image below)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I relocked the bootlocker. The exe files went half on, then errored out with `[155] Unknown Error` and when I disconnect the cable, it's like this:
What should I do now?
I appreciate any help

You didn't lock it.
It is still UNLOCKED.
Use RUU for your CID.
Can you upload RUU for HTC_Europe region somewhere and pass the link?
I saved the sections in img from my Russian Desire C and it's version 2.01.401.6
When I get home to the PC I can share them

Ulumia said:
You didn't lock it.
It is still UNLOCKED.
Use RUU for your CID.
Can you upload RUU for HTC_Europe region somewhere and pass the link?
I saved the sections in img from my Russian Desire C and it's version 2.01.401.6
When I get home to the PC I can share them
Click to expand...
Click to collapse
Sorry for late reply
Can you describe more in details how i should lock it?
And i'll appreciate if you send me the version you have
Unfortunately I don't have those files anymore but I'm searching for them right now to send it for you

A_matin12 said:
Can you describe more in details how i should lock it?
Click to expand...
Click to collapse
To lock the fastboot oem lock
A_matin12 said:
And i'll appreciate if you send me the version you have
Unfortunately I don't have those files anymore but I'm searching for them right now to send it for you
Click to expand...
Click to collapse
For now, I am in the hospital and can't pass them on
There is a RUU for Asia
Installation as a normal RUU
And 2.01.401.6 which I gave to my Russian HTC Desire C without NFC red
They need to be installed with fastboot flash system name.img etc

Ulumia said:
To lock the fastboot oem lock
For now, I am in the hospital and can't pass them on
There is a RUU for Asia
Installation as a normal RUU
And 2.01.401.6 which I gave to my Russian HTC Desire C without NFC red
They need to be installed with fastboot flash system name.img etc
Click to expand...
Click to collapse
Thanks I'll try it
I'm sorry to hear that
I'd appreciate if you send me those when you're free

Ulumia said:
To lock the fastboot oem lock
For now, I am in the hospital and can't pass them on
There is a RUU for Asia
Installation as a normal RUU
And 2.01.401.6 which I gave to my Russian HTC Desire C without NFC red
They need to be installed with fastboot flash system name.img etc
Click to expand...
Click to collapse
Now it's saying "Relocked"
I guess now the only thing i need is RUU

A_matin12 said:
I guess now the only thing i need is RUU
Click to expand...
Click to collapse
You have them.
You probably need HTC_Europe
A_matin12 said:
There are some `exe` files. So I downloaded some of them from the internet (image below)
Click to expand...
Click to collapse

Ulumia said:
You have them.
You probably need HTC_Europe
Click to expand...
Click to collapse
As i said before, I didn't have access to them and didn't even know where I downloaded them
But now I've found them
Which one did you want me to share with you?
Still I have an issue
Since the phone doesn't boot, I have to keep it in fastboot but Windows doesn't recognize it. So when I run the RUU, it says the phone isn't recognized and gives me errors
I don't remember how i solved it before

A_matin12 said:
Which one did you want me to share with you?
Click to expand...
Click to collapse
HTC_Europe
A_matin12 said:
Windows doesn't recognize it
Click to expand...
Click to collapse
Have you tried basic things like trying a different USB cable and/or a different USB port?
When the PC does recognize the smartphone can you copy the result of the
Code:
fastboot getvar all
command in its entirety?

Ulumia said:
HTC_Europe
Have you tried basic things like trying a different USB cable and/or a different USB port?
When the PC does recognize the smartphone can you copy the result of the
Code:
fastboot getvar all
command in its entirety?
Click to expand...
Click to collapse
297.78 MB file on MEGA
mega.nz
There you go
I installed htc drivers and now when i connect it to windows, it says `FASTBOOT USB`. So it recognizes it
But when i run the ruu, it says `USB Connection Error`
The result of command :
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.31.0000
(bootloader) version-baseband: 1.19.98.02
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: HT2AGW500178
(bootloader) imei: 354379050145721
(bootloader) product: golfu
(bootloader) platform: HBOOT-7225A
(bootloader) modelid: PL0110000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4106mV
(bootloader) partition-layout: HTC
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e118df77
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
I even tried to flash it via fastboot and zip rom but it gave me this:
Code:
Sending 'zip' (299840 KB) OKAY [ 24.540s]
Writing 'zip' (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: '42 custom id check fail')

I searched deeper and it's because i need supercid
but when i wanna change it with `fastboot oem writecid 11111111`, it says:
Code:
(bootloader) ����HTCE
(bootloader) Done!
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xB32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xB32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xB32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xB32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xB32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xB32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xB32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xB32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) [JAVACARD_ERR] SD/USBDISK Init error
(bootloader) writecid: permission denied, value 1

Another issue
Windows still doesn't recognize the phone :/
it says `FASTBOOT USB` but when i run fastboot commands, it says `waiting...`
I ran all the fastboot commands from linux
Why is flashing stock roms so F hard on htc :/

A_matin12 said:
I searched deeper and it's because i need supercid
but when i wanna change it with `fastboot oem writecid 11111111`, it says:
Code:
(bootloader) ����HTCE
(bootloader) Done!
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xB32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xB32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xB32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xB32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xB32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xB32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xB32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xB32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) [JAVACARD_ERR] SD/USBDISK Init error
(bootloader) writecid: permission denied, value 1
Click to expand...
Click to collapse
It's because of S-On
To turn it off, i need to unlock bootloader again
Damn, is there another way?

A_matin12 said:
HTC__J15
Click to expand...
Click to collapse
Hmm you have a very strange CID for which I do not think there is a RUU
Try to unlock the bootloader again then
Code:
fastboot oem writecid HTC__A07
then lock again and install RUU for HTC_Europe

Ulumia said:
Hmm you have a very strange CID for which I do not think there is a RUU
Try to unlock the bootloader again then
Code:
fastboot oem writecid HTC__A07
then lock again and install RUU for HTC_Europe
Click to expand...
Click to collapse
It still errors out:
Code:
(bootloader) Done!
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xB32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xB32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xB32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xB32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58
(bootloader) HWIO_SDC1_MD_REG_ADDR=0xA86000A0
(bootloader) HWIO_SDC1_NS_REG_ADDR=0xA86000A4
(bootloader) HWIO_SDC3_MD_REG_ADDR=0xA86000B0
(bootloader) HWIO_SDC3_NS_REG_ADDR=0xA86000B4
(bootloader) phys_to_virt(HWIO_SDC1_MD_REG_ADDR)=0xB32000A0
(bootloader) phys_to_virt(HWIO_SDC1_NS_REG_ADDR)=0xB32000A4
(bootloader) phys_to_virt(HWIO_SDC3_MD_REG_ADDR)=0xB32000B0
(bootloader) phys_to_virt(HWIO_SDC3_NS_REG_ADDR)=0xB32000B4
(bootloader) sdc_ns_reg value=0xFF9E0B58
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) [JAVACARD_ERR] SD/USBDISK Init error
(bootloader) writecid: permission denied, value 1

A_matin12 said:
It still errors out:
Click to expand...
Click to collapse
Did you unlock the bootloader?
Instructions on how to do this are on htcdev.com, you will need an HTCDev account for this.
Select All Other Supported Models.
Maybe it worked and errors in the process are normal.
Can you tell me what it says at the very top of the boot loader and copy the output of fastboot getvar all again?

Ulumia said:
Did you unlock the bootloader?
Instructions on how to do this are on htcdev.com, you will need an HTCDev account for this.
Select All Other Supported Models.
Maybe it worked and errors in the process are normal.
Can you tell me what it says at the very top of the boot loader and copy the output of fastboot getvar all again?
Click to expand...
Click to collapse
Yes I unlocked it again and it says UNLOCKED on top of the screen
No it still says the same
Of course:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.31.0000
(bootloader) version-baseband: 1.19.98.02
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: HT2AGW500178
(bootloader) imei: 354379050145721
(bootloader) product: golfu
(bootloader) platform: HBOOT-7225A
(bootloader) modelid: PL0110000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4135mV
(bootloader) partition-layout: HTC
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e118df77
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0

Question Root?

Is there anyone who has any boot.img or knows the correct procedure to root this thing?

kouzelnik3 said:
Is there anyone who has any boot.img or knows the correct procedure to root this thing?
Click to expand...
Click to collapse
I would install Magisk by following the official installation instructions. Let me know if you have any questions after reading through them.

ethical_haquer said:
I would install Magisk by following the official installation instructions. Let me know if you have any questions after reading through them.
Click to expand...
Click to collapse
Yeah, that's what I know, but I don't have that boot img or something, yet.

kouzelnik3 said:
Yeah, that's what I know, but I don't have that boot img or something, yet.
Click to expand...
Click to collapse
If you can dd the right partition from the tablet, you can have the boot image:
From adb shell, launch the comand "lsblk". You will get a list of partition currently on the tablet. The boot partition should be indicated one way or another.
From adb shell, "dd if=/dev/[insert-boot-partition-name] of=/storage/emulated/0/boot.img"
Tranfert the saved boot.img to your computer.

w1nst0n sm1th said:
If you can dd the right partition from the tablet, you can have the boot image:
From adb shell, launch the comand "lsblk". You will get a list of partition currently on the tablet. The boot partition should be indicated one way or another.
From adb shell, "dd if=/dev/[insert-boot-partition-name] of=/storage/emulated/0/boot.img"
Tranfert the saved boot.img to your computer.
Click to expand...
Click to collapse
Well, by this command I cannot see any boot.img partition, only few others, which is weird.
Also according to the "dd" command, it didn't work (screenshots) because of Permission denied.

Error message

kouzelnik3 said:
Well, by this command I cannot see any boot.img partition, only few others, which is weird.
Also according to the "dd" command, it didn't work (screenshots) because of Permission denied.
Click to expand...
Click to collapse
There is an error in your command:
It's "lsblk", not "ls -blk"
See here for a linux version:
lsblk
You may need to set developer options on the device before being able to run such a command :
Develloper Options
And here an explanation of the dd command:
dd
If you're not sure about dd (you should be very cautious with that command), post a picture of the result of the lsblk command and I will tell you the exact command for dd.
I long quit the android space, but I'm interrested by this tablet since Android 13 has a hypervisor normally included (able to run a virtual machine).

w1nst0n sm1th said:
There is an error in your command:
It's "lsblk", not "ls -blk"
See here for a linux version:
lsblk
You may need to set developer options on the device before being able to run such a command :
Develloper Options
And here an explanation of the dd command:
dd
If you're not sure about dd (you should be very cautious with that command), post a picture of the result of the lsblk command and I will tell you the exact command for dd.
I long quit the android space, but I'm interrested by this tablet since Android 13 has a hypervisor normally included (able to run a virtual machine).
Click to expand...
Click to collapse
I have set up the Developer options before, but when I use "lsblk" command, it says "/system/bin/sh: lsblk: inaccessible or not found" which is why I used "ls -lbk". Do you know what be an issue here?
I got same results even with my rooted OnePlus 10 Pro.

Well. Apparently, lsblk is not included.
You will have to wait for an update to be available on the telegram channel, unpack the update to extract the boot.img (init_boot.img).
See :
https://forum.xda-developers.com/t/guide-magisk-unlock-root-keep-root-oos-13-a-10.4571171/

w1nst0n sm1th said:
Well. Apparently, lsblk is not included.
You will have to wait for an update to be available on the telegram channel, unpack the update to extract the boot.img (init_boot.img).
See :
https://forum.xda-developers.com/t/guide-magisk-unlock-root-keep-root-oos-13-a-10.4571171/
Click to expand...
Click to collapse
I thought that. By the way, which telegram channel has those files?

w1nst0n sm1th said:
...
I long quit the android space, but I'm interrested by this tablet since Android 13 has a hypervisor normally included (able to run a virtual machine).
Click to expand...
Click to collapse
Too bad it's not the variant with more RAM & storage. I'm also very intrigued but know very little apart from couple YouTube videos.

While we try to gain root. Can we get instructions on how to unlock the bootloader so I don't have to have my storage wiped again when we do get root

I assume it is basic proces as on any other OP device. OEM unlock, fastboot mode and other fastboot flashing unlock, then yes. Someone can try.

Fastboot oem unlock does not work , Fastboot flashing unlock threw an error but said it was successful but did not wipe data. Manually wipped data and got stuck in a boot loop. Windows will not detect it in recovery mode and I can not get it back into bootloader mode.

XxBigBuckxX said:
Fastboot oem unlock does not work , Fastboot flashing unlock threw an error but said it was successful but did not wipe data. Manually wipped data and got stuck in a boot loop. Windows will not detect it in recovery mode and I can not get it back into bootloader mode.
Click to expand...
Click to collapse
Did you turn on OEM Unlock in developer options? And as you are stuck in bootloop without bootloader mode, I think the only option is service center.

kouzelnik3 said:
Did you turn on OEM Unlock in developer options? And as you are stuck in bootloop without bootloader mode, I think the only option is service center.
Click to expand...
Click to collapse
Yes I turned it on before unlocking bootloader, I paniced after it started to bootloop and relocked the bootloader after manually trying to wipe data which could be why I cant get into bootloader. I reached out to support hoping for a remote fix like the oneplus 10T but nothing. I could only get my pc to detect it in edl mode. I'm mailing it in today they didn't have any troubleshooting steps just going to RMA it.

XxBigBuckxX said:
Yes I turned it on before unlocking bootloader, I paniced after it started to bootloop and relocked the bootloader after manually trying to wipe data which could be why I cant get into bootloader. I reached out to support hoping for a remote fix like the oneplus 10T but nothing. I could only get my pc to detect it in edl mode. I'm mailing it in today they didn't have any troubleshooting steps just going to RMA it.
Click to expand...
Click to collapse
Well, trying to relock it was definitely the wrong move. RMA will solve it anyway.

I got my replacement today and it happened again. The only thing I had done was enable oem unlock. The only commands I ran
Code:
PS C:\Users\nate> adb devices
List of devices attached
49YLUKXKQSMBKB6T device
PS C:\Users\nate> adb reboot bootloader
PS C:\Users\nate> fastboot help
usage: fastboot [OPTION...] COMMAND...
flashing:
update ZIP Flash all partitions from an update.zip package.
flashall Flash all partitions from $ANDROID_PRODUCT_OUT.
On A/B devices, flashed slot is set as active.
Secondary images may be flashed to inactive slot.
flash PARTITION [FILENAME] Flash given partition, using the image from
$ANDROID_PRODUCT_OUT if no filename is given.
basics:
devices [-l] List devices in bootloader (-l: with device paths).
getvar NAME Display given bootloader variable.
reboot [bootloader] Reboot device.
locking/unlocking:
flashing lock|unlock Lock/unlock partitions for flashing
flashing lock_critical|unlock_critical
Lock/unlock 'critical' bootloader partitions.
flashing get_unlock_ability
Check whether unlocking is allowed (1) or not(0).
advanced:
erase PARTITION Erase a flash partition.
format[:FS_TYPE[:SIZE]] PARTITION
Format a flash partition.
set_active SLOT Set the active slot.
oem [COMMAND...] Execute OEM-specific command.
gsi wipe|disable Wipe or disable a GSI installation (fastbootd only).
wipe-super [SUPER_EMPTY] Wipe the super partition. This will reset it to
contain an empty set of default dynamic partitions.
create-logical-partition NAME SIZE
Create a logical partition with the given name and
size, in the super partition.
delete-logical-partition NAME
Delete a logical partition with the given name.
resize-logical-partition NAME SIZE
Change the size of the named logical partition.
snapshot-update cancel On devices that support snapshot-based updates, cancel
an in-progress update. This may make the device
unbootable until it is reflashed.
snapshot-update merge On devices that support snapshot-based updates, finish
an in-progress update if it is in the "merging"
phase.
fetch PARTITION OUT_FILE Fetch a partition image from the device.
boot image:
boot KERNEL [RAMDISK [SECOND]]
Download and boot kernel from RAM.
flash:raw PARTITION KERNEL [RAMDISK [SECOND]]
Create boot image and flash it.
--dtb DTB Specify path to DTB for boot image header version 2.
--cmdline CMDLINE Override kernel command line.
--base ADDRESS Set kernel base address (default: 0x10000000).
--kernel-offset Set kernel offset (default: 0x00008000).
--ramdisk-offset Set ramdisk offset (default: 0x01000000).
--tags-offset Set tags offset (default: 0x00000100).
--dtb-offset Set dtb offset (default: 0x01100000).
--page-size BYTES Set flash page size (default: 2048).
--header-version VERSION Set boot image header version.
--os-version MAJOR[.MINOR[.PATCH]]
Set boot image OS version (default: 0.0.0).
--os-patch-level YYYY-MM-DD
Set boot image OS security patch level.
Android Things:
stage IN_FILE Sends given file to stage for the next command.
get_staged OUT_FILE Writes data staged by the last command to a file.
options:
-w Wipe userdata.
-s SERIAL Specify a USB device.
-s tcp|udp:HOST[:PORT] Specify a network device.
-S SIZE[K|M|G] Break into sparse files no larger than SIZE.
--force Force a flash operation that may be unsafe.
--slot SLOT Use SLOT; 'all' for both slots, 'other' for
non-current slot (default: current active slot).
--set-active[=SLOT] Sets the active slot before rebooting.
--skip-secondary Don't flash secondary slots in flashall/update.
--skip-reboot Don't reboot device after flashing.
--disable-verity Sets disable-verity when flashing vbmeta.
--disable-verification Sets disable-verification when flashing vbmeta.
--fs-options=OPTION[,OPTION]
Enable filesystem features. OPTION supports casefold, projid, compress
--unbuffered Don't buffer input or output.
--verbose, -v Verbose output.
--version Display version.
--help, -h Show this message.
PS C:\Users\nate> fastboot flashing get_unlock_ability
(bootloader) unlock_ability is true
OKAY [ 0.003s]
Finished. Total time: 0.004s
PS C:\Users\nate> fastboot reboot fastboot
Rebooting into fastboot OKAY [ 0.001s]
< waiting for any device >
Finished. Total time: 15.144s
PS C:\Users\nate> fastboot getvar all
(bootloader) cpu-abi:arm64-v8a
(bootloader) snapshot-update-status:none
(bootloader) super-partition-name:super
(bootloader) is-logical:preloader_raw_b:no
(bootloader) is-logical:preloader_raw_a:no
(bootloader) is-logical:pi_img_a:no
(bootloader) is-logical:scp_a:no
(bootloader) is-logical:vcp_a:no
(bootloader) is-logical:dpm_b:no
(bootloader) is-logical:misc:no
(bootloader) is-logical:audio_dsp_a:no
(bootloader) is-logical:efuse:no
(bootloader) is-logical:connsys_wifi_a:no
(bootloader) is-logical:ocdt:no
(bootloader) is-logical:spmfw_b:no
(bootloader) is-logical:logo_b:no
(bootloader) is-logical:logo_a:no
(bootloader) is-logical:splash_odm:no
(bootloader) is-logical:sspm_b:no
(bootloader) is-logical:nvcfg:no
(bootloader) is-logical:connsys_bt_b:no
(bootloader) is-logical:vbmeta_b:no
(bootloader) is-logical:audio_dsp_b:no
(bootloader) is-logical:gpueb_b:no
(bootloader) is-logical:boot_para:no
(bootloader) is-logical:dtbo_b:no
(bootloader) is-logical:proinfo:no
(bootloader) is-logical:mvpu_algo_b:no
(bootloader) is-logical:nvdata:no
(bootloader) is-logical:protect2:no
(bootloader) is-logical:connsys_wifi_b:no
(bootloader) is-logical:userdata:no
(bootloader) is-logical:lk_b:no
(bootloader) is-logical:tee_b:no
(bootloader) is-logical:otp:no
(bootloader) is-logical:sdb:no
(bootloader) is-logical:gz_a:no
(bootloader) is-logical:gpueb_a:no
(bootloader) is-logical:dram_para:no
(bootloader) is-logical:cdt_engineering_a:no
(bootloader) is-logical:boot_a:no
(bootloader) is-logical:mcupm_a:no
(bootloader) is-logical:oplus_custom:no
(bootloader) is-logical:sda:no
(bootloader) is-logical:vcp_b:no
(bootloader) is-logical:init_boot_b:no
(bootloader) is-logical:init_boot_a:no
(bootloader) is-logical:flashinfo:no
(bootloader) is-logical:frp:no
(bootloader) is-logical:vendor_boot_b:no
(bootloader) is-logical:dtbo_a:no
(bootloader) is-logical:protect1:no
(bootloader) is-logical:sspm_a:no
(bootloader) is-logical:oplusreserve3:no
(bootloader) is-logical:lk_a:no
(bootloader) is-logical:persist:no
(bootloader) is-logical:oplusreserve6:no
(bootloader) is-logical:boot_b:no
(bootloader) is-logical:scp_b:no
(bootloader) is-logical:expdb:no
(bootloader) is-logical:param:no
(bootloader) is-logical:mvpu_algo_a:no
(bootloader) is-logical:pi_img_b:no
(bootloader) is-logical:oplusreserve1:no
(bootloader) is-logical:vendor_boot_a:no
(bootloader) is-logical:dpm_a:no
(bootloader) is-logical:mcupm_b:no
(bootloader) is-logical:ccu_a:no
(bootloader) is-logical:seccfg:no
(bootloader) is-logical:vbmeta_vendor_b:no
(bootloader) is-logical:apusys_b:no
(bootloader) is-logical:para:no
(bootloader) is-logical:gz_b:no
(bootloader) is-logical:nvram:no
(bootloader) is-logical:cdt_engineering_b:no
(bootloader) is-logical:apusys_a:no
(bootloader) is-logical:vbmeta_system_b:no
(bootloader) is-logical:oplusreserve5:no
(bootloader) is-logical:spmfw_a:no
(bootloader) is-logical:ccu_b:no
(bootloader) is-logical:sdc:no
(bootloader) is-logical:tee_a:no
(bootloader) is-logical:connsys_bt_a:no
(bootloader) is-logical:sec1:no
(bootloader) is-logical:oplusreserve2:no
(bootloader) is-logical:metadata:no
(bootloader) is-logical:vbmeta_system_a:no
(bootloader) is-logical:super:no
(bootloader) is-logical:vbmeta_a:no
(bootloader) is-logical:vbmeta_vendor_a:no
(bootloader) is-logical:system_a:yes
(bootloader) is-logical:system_b:yes
(bootloader) is-logical:system_ext_a:yes
(bootloader) is-logical:system_ext_b:yes
(bootloader) is-logical:vendor_a:yes
(bootloader) is-logical:vendor_b:yes
(bootloader) is-logical:product_a:yes
(bootloader) is-logical:product_b:yes
(bootloader) is-logical:my_product_a:yes
(bootloader) is-logical:my_product_b:yes
(bootloader) is-logical:odm_a:yes
(bootloader) is-logical:odm_b:yes
(bootloader) is-logical:my_engineering_a:yes
(bootloader) is-logical:my_engineering_b:yes
(bootloader) is-logical:vendor_dlkm_a:yes
(bootloader) is-logical:vendor_dlkm_b:yes
(bootloader) is-logical:odm_dlkm_a:yes
(bootloader) is-logical:odm_dlkm_b:yes
(bootloader) is-logical:my_stock_a:yes
(bootloader) is-logical:my_stock_b:yes
(bootloader) is-logical:my_heytap_a:yes
(bootloader) is-logical:my_heytap_b:yes
(bootloader) is-logical:my_carrier_a:yes
(bootloader) is-logical:my_carrier_b:yes
(bootloader) is-logical:my_region_a:yes
(bootloader) is-logical:my_region_b:yes
(bootloader) is-logical:my_company_a:yes
(bootloader) is-logical:my_company_b:yes
(bootloader) is-logical:my_preload_a:yes
(bootloader) is-logical:my_preload_b:yes
(bootloader) is-logical:my_bigball_a:yes
(bootloader) is-logical:my_bigball_b:yes
(bootloader) is-logical:my_manifest_a:yes
(bootloader) is-logical:my_manifest_b:yes
(bootloader) battery-voltage:3
(bootloader) treble-enabled:true
(bootloader) is-userspace:yes
(bootloader) partition-size:preloader_raw_b:0x3FF000
(bootloader) partition-size:preloader_raw_a:0x3FF000
(bootloader) partition-size:pi_img_a:0x100000
(bootloader) partition-size:scp_a:0x600000
(bootloader) partition-size:vcp_a:0x600000
(bootloader) partition-size:dpm_b:0x400000
(bootloader) partition-size:misc:0x80000
(bootloader) partition-size:audio_dsp_a:0xC00000
(bootloader) partition-size:efuse:0x80000
(bootloader) partition-size:connsys_wifi_a:0x800000
(bootloader) partition-size:ocdt:0x800000
(bootloader) partition-size:spmfw_b:0x100000
(bootloader) partition-size:logo_b:0x2000000
(bootloader) partition-size:logo_a:0x2000000
(bootloader) partition-size:splash_odm:0x2580000
(bootloader) partition-size:sspm_b:0x100000
(bootloader) partition-size:nvcfg:0x2000000
(bootloader) partition-size:connsys_bt_b:0x800000
(bootloader) partition-size:vbmeta_b:0x800000
(bootloader) partition-size:audio_dsp_b:0xC00000
(bootloader) partition-size:gpueb_b:0x100000
(bootloader) partition-size:boot_para:0x100000
(bootloader) partition-size:dtbo_b:0x800000
(bootloader) partition-size:proinfo:0x300000
(bootloader) partition-size:mvpu_algo_b:0x4000000
(bootloader) partition-size:nvdata:0x4000000
(bootloader) partition-size:protect2:0x800000
(bootloader) partition-size:connsys_wifi_b:0x800000
(bootloader) partition-size:userdata:0x19DB7F8000
(bootloader) partition-size:lk_b:0x500000
(bootloader) partition-size:tee_b:0x500000
(bootloader) partition-size:otp:0x2B00000
(bootloader) partition-size:gz_a:0x2000000
(bootloader) partition-size:gpueb_a:0x100000
(bootloader) partition-size:dram_para:0x1900000
(bootloader) partition-size:cdt_engineering_a:0xC80000
(bootloader) partition-size:boot_a:0x4000000
(bootloader) partition-size:mcupm_a:0x100000
(bootloader) partition-size:oplus_custom:0x100000
(bootloader) partition-size:vcp_b:0x600000
(bootloader) partition-size:init_boot_b:0x800000
(bootloader) partition-size:init_boot_a:0x800000
(bootloader) partition-size:flashinfo:0x1000000
(bootloader) partition-size:frp:0x100000
(bootloader) partition-size:vendor_boot_b:0x4000000
(bootloader) partition-size:dtbo_a:0x800000
(bootloader) partition-size:protect1:0x800000
(bootloader) partition-size:sspm_a:0x100000
(bootloader) partition-size:oplusreserve3:0x4000000
(bootloader) partition-size:lk_a:0x500000
(bootloader) partition-size:oplusreserve6:0x4000000
(bootloader) partition-size:boot_b:0x4000000
(bootloader) partition-size:scp_b:0x600000
(bootloader) partition-size:expdb:0x8000000
(bootloader) partition-size:param:0x100000
(bootloader) partition-size:mvpu_algo_a:0x4000000
(bootloader) partition-size:pi_img_b:0x100000
(bootloader) partition-size:oplusreserve1:0x800000
(bootloader) partition-size:vendor_boot_a:0x4000000
(bootloader) partition-size:dpm_a:0x400000
(bootloader) partition-size:mcupm_b:0x100000
(bootloader) partition-size:ccu_a:0x400000
(bootloader) partition-size:seccfg:0x800000
(bootloader) partition-size:vbmeta_vendor_b:0x800000
(bootloader) partition-size:apusys_b:0x400000
(bootloader) partition-size:para:0x80000
(bootloader) partition-size:gz_b:0x2000000
(bootloader) partition-size:nvram:0x4000000
(bootloader) partition-size:cdt_engineering_b:0xC80000
(bootloader) partition-size:apusys_a:0x400000
(bootloader) partition-size:vbmeta_system_b:0x800000
(bootloader) partition-size:oplusreserve5:0x2000000
(bootloader) partition-size:spmfw_a:0x100000
(bootloader) partition-size:ccu_b:0x400000
(bootloader) partition-size:tee_a:0x500000
(bootloader) partition-size:connsys_bt_a:0x800000
(bootloader) partition-size:sec1:0x200000
(bootloader) partition-size:metadata:0x2000000
(bootloader) partition-size:vbmeta_system_a:0x800000
(bootloader) partition-size:vbmeta_a:0x800000
(bootloader) partition-size:vbmeta_vendor_a:0x800000
(bootloader) partition-size:system_a:0x2E961000
(bootloader) partition-size:system_b:0x0
(bootloader) partition-size:system_ext_a:0x3D2E6000
(bootloader) partition-size:system_ext_b:0x0
(bootloader) partition-size:vendor_a:0x421DF000
(bootloader) partition-size:vendor_b:0x0
(bootloader) partition-size:product_a:0x1CA000
(bootloader) partition-size:product_b:0x0
(bootloader) partition-size:my_product_a:0x13813000
(bootloader) partition-size:my_product_b:0x0
(bootloader) partition-size:odm_a:0x46C6C000
(bootloader) partition-size:odm_b:0x0
(bootloader) partition-size:my_engineering_a:0x52000
(bootloader) partition-size:my_engineering_b:0x0
(bootloader) partition-size:vendor_dlkm_a:0x3589000
(bootloader) partition-size:vendor_dlkm_b:0x0
(bootloader) partition-size:odm_dlkm_a:0x55000
(bootloader) partition-size:odm_dlkm_b:0x0
(bootloader) partition-size:my_stock_a:0x1EAA9000
(bootloader) partition-size:my_stock_b:0x0
(bootloader) partition-size:my_heytap_a:0x2CAE2000
(bootloader) partition-size:my_heytap_b:0x0
(bootloader) partition-size:my_carrier_a:0x52000
(bootloader) partition-size:my_carrier_b:0x0
(bootloader) partition-size:my_region_a:0x376000
(bootloader) partition-size:my_region_b:0x0
(bootloader) partition-size:my_company_a:0x52000
(bootloader) partition-size:my_company_b:0x0
(bootloader) partition-size:my_preload_a:0x253000
(bootloader) partition-size:my_preload_b:0x0
(bootloader) partition-size:my_bigball_a:0x2BF47000
(bootloader) partition-size:my_bigball_b:0x0
(bootloader) partition-size:my_manifest_a:0x58000
(bootloader) partition-size:my_manifest_b:0x0
(bootloader) version-vndk:31
(bootloader) has-slot:preloader_raw:yes
(bootloader) has-slot:pi_img:yes
(bootloader) has-slot:scp:yes
(bootloader) has-slot:vcp:yes
(bootloader) has-slot:dpm:yes
(bootloader) has-slot:misc:no
(bootloader) has-slot:audio_dsp:yes
(bootloader) has-slot:efuse:no
(bootloader) has-slot:connsys_wifi:yes
(bootloader) has-slot:ocdt:no
(bootloader) has-slot:spmfw:yes
(bootloader) has-slot:logo:yes
(bootloader) has-slot:splash_odm:no
(bootloader) has-slot:sspm:yes
(bootloader) has-slot:nvcfg:no
(bootloader) has-slot:connsys_bt:yes
(bootloader) has-slot:vbmeta:yes
(bootloader) has-slot:gpueb:yes
(bootloader) has-slot:boot_para:no
(bootloader) has-slot:dtbo:yes
(bootloader) has-slot:proinfo:no
(bootloader) has-slot:mvpu_algo:yes
(bootloader) has-slot:nvdata:no
(bootloader) has-slot:protect2:no
(bootloader) has-slot:userdata:no
(bootloader) has-slot:lk:yes
(bootloader) has-slot:tee:yes
(bootloader) has-slot:otp:no
(bootloader) has-slot:sdb:no
(bootloader) has-slot:gz:yes
(bootloader) has-slot:dram_para:no
(bootloader) has-slot:cdt_engineering:yes
(bootloader) has-slot:boot:yes
(bootloader) has-slot:mcupm:yes
(bootloader) has-slot:oplus_custom:no
(bootloader) has-slot:sda:no
(bootloader) has-slot:init_boot:yes
(bootloader) has-slot:flashinfo:no
(bootloader) has-slot:frp:no
(bootloader) has-slot:vendor_boot:yes
(bootloader) has-slot:protect1:no
(bootloader) has-slot:oplusreserve3:no
(bootloader) has-slot:persist:no
(bootloader) has-slot:oplusreserve6:no
(bootloader) has-slot:expdb:no
(bootloader) has-slot:param:no
(bootloader) has-slot:oplusreserve1:no
(bootloader) has-slot:ccu:yes
(bootloader) has-slot:seccfg:no
(bootloader) has-slot:vbmeta_vendor:yes
(bootloader) has-slot:apusys:yes
(bootloader) has-slot:para:no
(bootloader) has-slot:nvram:no
(bootloader) has-slot:vbmeta_system:yes
(bootloader) has-slot:oplusreserve5:no
(bootloader) has-slot:sdc:no
(bootloader) has-slot:sec1:no
(bootloader) has-slot:oplusreserve2:no
(bootloader) has-slot:metadata:no
(bootloader) has-slot:super:no
(bootloader) has-slot:system:yes
(bootloader) has-slot:system_ext:yes
(bootloader) has-slot:vendor:yes
(bootloader) has-slot:product:yes
(bootloader) has-slot:my_product:yes
(bootloader) has-slot:odm:yes
(bootloader) has-slot:my_engineering:yes
(bootloader) has-slot:vendor_dlkm:yes
(bootloader) has-slot:odm_dlkm:yes
(bootloader) has-slot:my_stock:yes
(bootloader) has-slot:my_heytap:yes
(bootloader) has-slot:my_carrier:yes
(bootloader) has-slot:my_region:yes
(bootloader) has-slot:my_company:yes
(bootloader) has-slot:my_preload:yes
(bootloader) has-slot:my_bigball:yes
(bootloader) has-slot:my_manifest:yes
(bootloader) security-patch-level:2023-03-05
(bootloader) vendor-fingerprint:oplus/ossi/ossi:12/SP1A.210812.016/1679153745760:user/release-keys
(bootloader) hw-revision:0
(bootloader) current-slot:a
(bootloader) serialno:49YLUKXKQSMBKB6T
(bootloader) product:ossi
(bootloader) version-os:12
(bootloader) first-api-level:31
(bootloader) slot-count:2
(bootloader) max-download-size:0x10000000
(bootloader) version:0.4
(bootloader) version-baseband:
(bootloader) secure:yes
(bootloader) dynamic-partition:true
(bootloader) system-fingerprint:oplus/ossi/ossi:12/SP1A.210812.016/1679153745760:user/release-keys
(bootloader) version-bootloader:unknown
(bootloader) unlocked:no
all:
Finished. Total time: 1.938s
PS C:\Users\nate> fastboot reboot
Rebooting OKAY [ 0.000s]
Finished. Total time: 0.001s
Ater that reboot just right back into the bootloop

Right after that? You basically just rebooted to bootloader, fastboot and then back to the system, but instead of booting, bootloop again? That's even more weird.

kouzelnik3 said:
Right after that? You basically just rebooted to bootloader, fastboot and then back to the system, but instead of booting, bootloop again? That's even more weird.
Click to expand...
Click to collapse
Yeah , I am pretty confused. Service center is not able to help me again yet (Only provide refund which is not what I want) because the previous service request is still open stuck on the device inspection stage. I am just trying to figure out stuff on my own at the moment untill that gets resolved.
I was able to figure a few more things out but not familiar with MTK as I am edl but I went down that path. I was able to get into preloader mode and also downloader mode. I switched over to linux and used mtkclient and it was detecing the device but giving watchdog errors.