Database Develop

[SOLVED] Can't flash RUU's?

Sorry for creating a lot of help threads, but things just don't wanna work my way.
Yesterday I wanted to flash a RUU to see exactly how HTC does things and if it's easy or hard. Anyway. I come from a Galaxy S3 and if I wanted to go back to stock from any other rom, I simply flashed a stock rom tar with a program called Odin, but it doesn't seem to be as simple with HTC.
I downloaded a RUU for the Europe region as it seemed the most obvious thing to do, but my CID is Nordic (HTC__Y13). Here's how it went:
Being on a 4.2.2 custom rom:
I tried running the RUU when I was on a 4.2.2. custom rom (InsertCoin 2.0.2), and I fired up the RUU file and followed the instructions. Then it said my phone isn't supported and that I need another RUU file.
Being on a stock odexed 1.29 rom:
I then installed a stock 1.29 rom from Mike1986. and then fired up the RUU. I followed the instructions and it seems the flashing started. It sent me to the RUU mode (the HTC screen) and began the flashing process. It said it wiped the data and that it sent some signature keys, I think. Three minutes later, the RUU window disappeared. I could see the program was still running but the window disappeared. It quickly flashed for about half a second and I could see some text saying that my phone isn't supported, but why the hell did it commence the flashing?
I pulled the cable, long-pressed the power button and let it boot, it hadn't wiped a thing.
Let it be known that before I opened the RUU's, I made sure I was bootloader locked and S-ON (with the revone method).
Is it because I have the Nordic CID and I had a RUU for the European region? If so, I looked anywhere and everywhere for a Nordic RUU but there's none to be found.
Any help is appreciated.

You can only use an RUU which is the same or newer than the firmware on the phone, e.g. if your last official update was 1.29.401.13 you could only use an RUU that version or above UNLESS you're S-OFF, in which case you can use an older one if you have Super CID and a locked/relocked bootloader

EddyOS said:
You can only use an RUU which is the same or newer than the firmware on the phone, e.g. if your last official update was 1.29.401.13 you could only use an RUU that version or above UNLESS you're S-OFF, in which case you can use an older one if you have Super CID and a locked/relocked bootloader
Click to expand...
Click to collapse
So what you're saying, is:
If I acquire Super CID, then flash a Europe RUU and then set my CID back to what it originally was (or maybe even set it to HTC__001) and then reflash the RUU, and it'll work beautifully? I'm S-OFF, btw.

Theshawty said:
So what you're saying, is:
If I acquire Super CID, then flash a Europe RUU and then set my CID back to what it originally was (or maybe even set it to HTC__001) and then reflash the RUU, and it'll work beautifully? I'm S-OFF, btw.
Click to expand...
Click to collapse
Where you S-Off or S-On when you ran the RUU?

bobsie41 said:
Where you S-Off or S-On when you ran the RUU?
Click to expand...
Click to collapse
S-ON with the bootloader locked. I wanted to see if it was possible.
I'm not really looking to revert to unrooted stock, at least not now. I just want to know that it's possible without too much work for when it would be necessary or when I want to try out unrooted stock again. It's always nice to have a fallback.

Theshawty said:
S-ON with the bootloader locked. I wanted to see if it was possible.
I'm not really looking to revert to unrooted stock, at least not now. I just want to know that it's possible without too much work for when it would be necessary or when I want to try out unrooted stock again. It's always nice to have a fallback.
Click to expand...
Click to collapse
As far as I'm aware, you can only run a RUU that is relevant to you device whilst you are s-on and only one that is equal to or above the firmware that you are running.
The only way to return to official un-rooted stock is, again, to run a RUU for your device or install a completely stock nandroid backup of your device or one running the same version as yours.

OK, full example...
You originally get an unbranded One from the EU and you get the OTA to 1.29.401.13. From this point on, with an S-ON/Locked phone with CID HTC__001 you can ONLY flash an RUU which is 1.29.401.13 or higher. This will never change. If you get an RUU from a specific carrier you cannot flash it as it doesn't match your CID.
If you unlock the bootloader, but stay S-ON, you cannot flash an RUU at all - you HAVE to relock the bootloader first but you can still only flash an RUU matching your CID and is the same or newer than your current version.
If you S-OFF and change the CID to 11111111 you can flash ANY RUU you want, even those older than your current version, e.g. 1.28.401.7. You still have to have a locked/relocked bootloader but you can stay S-OFF and flash the RUU. As the only RUU available at the moment for the unbranded One is 1.28.401.7 it means you can flash that and then get the OTA updates in sequence to get to the latest version
Once back at the older version using the RUU you could change your CID back to HTC__001 if you wanted but I don't think it matters

EddyOS said:
OK, full example...
You originally get an unbranded One from the EU and you get the OTA to 1.29.401.13. From this point on, with an S-ON/Locked phone with CID HTC__001 you can ONLY flash an RUU which is 1.29.401.13 or higher. This will never change. If you get an RUU from a specific carrier you cannot flash it as it doesn't match your CID.
If you unlock the bootloader, but stay S-ON, you cannot flash an RUU at all - you HAVE to relock the bootloader first but you can still only flash an RUU matching your CID and is the same or newer than your current version.
If you S-OFF and change the CID to 11111111 you can flash ANY RUU you want, even those older than your current version, e.g. 1.28.401.7. You still have to have a locked/relocked bootloader but you can stay S-OFF and flash the RUU. As the only RUU available at the moment for the unbranded One is 1.28.401.7 it means you can flash that and then get the OTA updates in sequence to get to the latest version
Once back at the older version using the RUU you could change your CID back to HTC__001 if you wanted but I don't think it matters
Click to expand...
Click to collapse
Ah, thanks for the clarification! If I do this (Super CID plus flash the RUU), should I change back to the HTC__Y13 cid or change to something like HTC__001 to get the updates for the Europe region? I heard Europe gets OTA's faster than other regions.
One more thing, why does the bootloader have to be locked? Does the RUU check for this?

Theshawty said:
Ah, thanks for the clarification! If I do this (Super CID plus flash the RUU), should I change back to the HTC__Y13 cid or change to something like HTC__001 to get the updates for the Europe region? I heard Europe gets OTA's faster than other regions.
One more thing, why does the bootloader have to be locked? Does the RUU check for this?
Click to expand...
Click to collapse
If you wish to get ota's you will need to have a cid which is relevant to the RUU you have run. Either of those cid's should work for a x.xx.401.x RUU. Not sure about the bootloader locking for an RUU.

bobsie41 said:
If you wish to get ota's you will need to have a cid which is relevant to the RUU you have run. Either of those cid's should work for a x.xx.401.x RUU. Not sure about the bootloader locking for an RUU.
Click to expand...
Click to collapse
The bootloader doesn't need to be locked to flash a RUU. A guy over at Swedroid flashed a Europe RUU (401 device) (after setting Super CID) coming from a carrier-branded One and the RUU did flash perfectly.
I would of course want OTA's, but the thing is, I heard Europe gets them faster than the Nordic region.

Theshawty said:
The bootloader doesn't need to be locked to flash a RUU. A guy over at Swedroid flashed a Europe RUU (401 device) (after setting Super CID) coming from a carrier-branded One and the RUU did flash perfectly.
I would of course want OTA's, but the thing is, I heard Europe gets them faster than the Nordic region.
Click to expand...
Click to collapse
Not necessarily. As with the s3, releases seem pretty random from country to country in Europe. I had the one x with HTC__001 cid and was one of the last to be updated.
Sent from my Nexus 7 using xda premium

Locked the bootloader and went into fastboot and started the RUU. It is now flashing :victory:
After it's done, I will turn the CID back to HTC__Y13 and reflash the RUU.

Theshawty said:
The bootloader doesn't need to be locked to flash a RUU. A guy over at Swedroid flashed a Europe RUU (401 device) (after setting Super CID) coming from a carrier-branded One and the RUU did flash perfectly.
I would of course want OTA's, but the thing is, I heard Europe gets them faster than the Nordic region.
Click to expand...
Click to collapse
I, personally, would relock the bootloader purely to cover yourself. As for CID, it's up to you. Using HTC__001 might not get it the second an OTA comes out but I'm sure you're patient enough to wait a few days

EddyOS said:
I, personally, would relock the bootloader purely to cover yourself. As for CID, it's up to you. Using HTC__001 might not get it the second an OTA comes out but I'm sure you're patient enough to wait a few days
Click to expand...
Click to collapse
I just want back to stock for a few days. I'm a bit tired of custom roming yet I can't stay away from it!

Theshawty said:
I just want back to stock for a few days. I'm a bit tired of custom roming yet I can't stay away from it!
Click to expand...
Click to collapse
I've done the same with my Nexus 4, and shall do the same with my One when I get it next month. I want S-OFF purely because the only RUU we have is an older than what I'll likely get on my phone. This way I can always go back to stock (unless a newer RUU leaks that is!)

How awfully peculiar, though. After I flashed to stock (the 1.28 something RUU), I got an update to 1.29.401.12. My brother, whom also have a One in the same region as I, has the 1.29.401.16 update (I am four decimals behind him ).
I thought I would get an update to .16, or am I just being too impatient?
I know I had .16 before custom roms though.

I read all, very useful conversation,saved me lot of time
Only a thing i havent understand
Im now S-OFF,unlocked with superCID ( runnind a branded italian rom with (now old)TIM__041(if i rememeber right)cid)
What i need to do to have a stock unbranded european RUU
Do i need to relock bootloader Before flashing or not matters?

Theshawty said:
How awfully peculiar, though. After I flashed to stock (the 1.28 something RUU), I got an update to 1.29.401.12. My brother, whom also have a One in the same region as I, has the 1.29.401.16 update (I am four decimals behind him ).
I thought I would get an update to .16, or am I just being too impatient?
I know I had .16 before custom roms though.
Click to expand...
Click to collapse
.16 was for the M7_U handsets, M7_UL is on .12

EddyOS said:
.16 was for the M7_U handsets, M7_UL is on .12
Click to expand...
Click to collapse
But my little brother and I both have UL devices, and his clearly says UL in the about screens.

Theshawty said:
But my little brother and I both have UL devices, and his clearly says UL in the about screens.
Click to expand...
Click to collapse
Hmmm, perhaps it is down to CID then...I don't know anyone in the UK with anything over .12

[Q] Trying to get the latest OTA update

Hi, I'm s-off and CID 11111111 and I'm in Canada, I flashed this
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed and every thing worked perfectly, then I changed my CID to HTC___Y13 to get the latest OTA update, when the update finished downloading I got a message saying that my HTC is running modified software or something like that and for my safty the update will not install.
What wrong here? can't I get the update this way?
Thank you...

nisayramo said:
Hi, I'm s-off and CID 11111111 and I'm in Canada, I flashed this
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed and every thing worked perfectly, then I changed my CID to HTC___Y13 to get the latest OTA update, when the update finished downloading I got a message saying that my HTC is running modified software or something like that and for my safty the update will not install.
What wrong here? can't I get the update this way?
Thank you...
Click to expand...
Click to collapse
at the very least, its because you have a custom recovery. Thats why the OTA failed

Where can I download stock recovery? and if i got it what i did should work in theory right?

If after you've flashed ruu, didn't flash anything .You already have stock recovery!
Other words ,after RUU you at the stock recovery.
What your MID?
"RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed" seems for 0710000 MID.
More likely,the reason of fault OTA - you are unable to meet mid OTA update.

tash2013 said:
If after you've flashed ruu, didn't flash anything .You already have stock recovery!
Other words ,after RUU you at the stock recovery.
What your MID?
"RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed" seems for 0710000 MID.
More likely,the reason of fault OTA - you are unable to meet mid OTA update.
Click to expand...
Click to collapse
Oh, I see thank you for the help.. My MID is PN0712000

You are trying to flash the OTA to htc__y13 cid/0710000 mid on phone with 07120000 mid - it's a bad idea.
What to do?
1) You can change mid, but I strongly DO NOT advise - this is a dangerous procedure.
2) You can flash the RUU for your mid and just wait for the OTA update will come to you - it is good

tash2013 said:
You are trying to flash the OTA to htc__y13 cid/0710000 mid on phone with 07120000 mid - it's a bad idea.
What to do?
1) You can change mid, but I strongly DO NOT advise - this is a dangerous procedure.
2) You can flash the RUU for your mid and just wait for the OTA update will come to you - it is good
Click to expand...
Click to collapse
I'm trying to find An RUU for my MID can you help? and of course thank you..

nisayramo said:
I'm trying to find An RUU for my MID can you help? and of course thank you..
Click to expand...
Click to collapse
What your originally CID?
And more.. just an advise .. under your current condition (after europe RUU) do not going to s-on never.

tash2013 said:
What your originally CID?
And more.. just an advise .. under your current condition (after europe RUU) do not going to s-on never.
Click to expand...
Click to collapse
My Origianl CID is BM___001, and got it s-off for ever

Unfortunately, I don't oriented to the North American operators,and I do not know what is BM .
And therefore can't advise the exact RUU
OK, let's go through the first way, under your current state change your mid to European
type:* fastboot oem writemid PN0710000
Stop stop! Before change mid type here your : fastboot getvar all

tash2013 said:
Unfortunately, I don't oriented to the North American operators,and I do not know what is BM .
And therefore can't advise the exact RUU
OK, let's go through the first way, under your current state change your mid to European
type:* fastboot oem writemid PN0710000
Stop stop! Before change mid type here your : fastboot getvar all
Click to expand...
Click to collapse
BM is Bell Mobility

I did not find your BM RUU from here
http://forum.xda-developers.com/showthread.php?p=39588860
and here
http://www.androidfiles.org/ruu/?developer=M7
Only a nandroid backup ,but I think it is not full stock, at least a stock recovery is missing and I'm afraid something else.
Time you were already flashed by the European RUU, let will change MID to European. And you will be have completely European unbranded phone.
if you decide do it .. print here " fastboot getvar all" (without your imei) I'll check your current state.

Which CID gets the fastest OTA?

My CID is htc_001 and it sucks i allways get ota updates very slow compared to the other cids, so my question is to which cid should i change in order to get the fastest ota updates?
And another question, i flashed TWRP and rooted my phone, i still can get ota updates?
Again sorry for my noobish questions and my bad english.

You will need to be fully stock to get OTA's, recovery, no missing apps, stock rom etc.
and as for CID, well at a guess I would say super cid would get the updates first, however, recently ive heard its very dependant on your operator, country and whether you brought your phone or its on contract.
Im in the UK and on CID HTC__001 too, I read today that HTC are releasing the sense 6 update to UK customers somewhere around the 11th June, so Wednesday. im all ready for it, just got to flash stock recovery.

Seanie280672 said:
You will need to be fully stock to get OTA's, recovery, no missing apps, stock rom etc.
and as for CID, well at a guess I would say super cid would get the updates first, however, recently ive heard its very dependant on your operator, country and whether you brought your phone or its on contract.
Im in the UK and on CID HTC__001 too, I read today that HTC are releasing the sense 6 update to UK customers somewhere around the 11th June, so Wednesday. im all ready for it, just got to flash stock recovery.
Click to expand...
Click to collapse
So all i need to do to get updateds is to flash stock recovery? (i can keep the root, right?)
How can i flash the stock recovery?

Num_Lock said:
So all i need to do to get updateds is to flash stock recovery? (i can keep the root, right?)
How can i flash the stock recovery?
Click to expand...
Click to collapse
Code:
fastboot flash recovery recovery.img

alray said:
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Ok... do I need a file or something? can you explain more detailed?
I'm sorry for being noob it's just I'm used to samsung phones development and the htc development is different with new stuff (s off unlocking ruu and whatever) so i need you to explain me more detailed.
Thank you.

Num_Lock said:
Ok... I need a file or something? can you explain in more details?
I'm sorry for being noob it's just I'm reguler to samsung phones development and the htc development is different with new stuff (s off unlocking ruu and whatever) so i need you to explain me more detailed.
Thank you.
Click to expand...
Click to collapse
you need the stock recovery file (recovery.img) from the same version firmware of your phone. i.e if you phone is on 4.19.401.1 and you want to update to 5.20.401.1, you need the recovery.img file from the 4.19.401.1 firmware.
also read this: http://forum.xda-developers.com/showpost.php?p=52894276&postcount=9

alray said:
you need the stock recovery file (recovery.img) from the same version firmware of your phone. i.e if you phone is on 4.19.401.1 and you want to update to 5.20.401.1, you need the recovery.img file from the 4.19.401.1 firmware.
also read this: http://forum.xda-developers.com/showpost.php?p=52894276&postcount=9
Click to expand...
Click to collapse
OK and one more thing, i need to s off to change my cid?

Num_Lock said:
OK and one more thing, i need to s off to change my cid?
Click to expand...
Click to collapse
yes you need s-off, and if you change your cid, it must match your sw version! some software version only have a unique compatible cid and other have many compatible cid. i.e .401 sw version can use many different cid: HTC__001, HTC__Y13, HTC__032, HTC__203 etc etc..... but .502 version can only use one cid: CWS__001
to change cid:
Code:
fastboot oem writecid YOUR_CID [COLOR="Green"]<---- in most cases, start with HTC in capital letter, 2 underscores and 3 digits, always 8 characters total.[/COLOR]
i.e:
Code:
fastboot oem writecid HTC__001
you can read your actual cid with this command:
Code:
fastboot oem readcid

alray said:
yes you need s-off, and if you change your cid, it must match your sw version! some software version only have a unique compatible cid and other have many compatible cid. i.e .401 sw version can use many different cid: HTC__001, HTC__Y13, HTC__032, HTC__203 etc etc..... but .502 version can only use one cid: CWS__001
to change cid:
Code:
fastboot oem writecid YOUR_CID [COLOR="Green"]<---- in most cases, start with HTC in capital letter, 2 underscores and 3 digits, always 8 characters total.[/COLOR]
i.e:
Code:
fastboot oem writecid HTC__001
you can read your actual cid with this command:
Code:
fastboot oem readcid
Click to expand...
Click to collapse
I want to change to supercid, it supports my version? and with s off i can still get ota right?

Num_Lock said:
I want to change to supercid, it supports my version? and with s off i can still get ota right?
Click to expand...
Click to collapse
on some sw version, you will not receive ota update with supercid. supercid is used to bypass cid check when installing some rom/ruu.
for s-off question, read the link i have posted at post #6

alray said:
on some sw version, you will not receive ota update with supercid. supercid is used to bypass cid check when installing some rom/ruu.
for s-off question, read the link i have posted at post #6
Click to expand...
Click to collapse
In my version i will get ota updates with supercid?
Thanks for your help i really appreciate it.

Num_Lock said:
In my version i will get ota updates with supercid?
Thanks for your help i really appreciate it.
Click to expand...
Click to collapse
idk, refer to the android-info.txt of the ota.zip and you'll see all supported cid.

USA developers edition get ota first every time
from HTC One

[Q] OTA 5.02 Update with TWRP

Hello,
I have looked on xda for an answer before i started this thread but couln't really find the answer or solution i'm personally looking for.. The problem is a friend of mine is S-On with an ex-contract HTC One (M7) CID is something like VODA..... and his HBoot is 1.57.0000 - I'm trying to S-Off his phone so he can get rid of the Vodafone and Flash Firmware and European RUU (This is i can do) but i need to S-Off it 1st ... I installed TWRP so as to root his phone and unlocked the bootloader (HTCDev unlock token) BUT now the problem is, he's just had the Lollipop 5.02 OTA update and of course, cannot instal it with TWRP present :/ i was told just to flash Stock recovery over it? is this correct? and if so, how would i go about it please and how would i get S-Off on his mobile please? I'm lead to believe that Sunshine S-Off is the only option with that HBoot version.. ?
Many thanks in advance to xda and its members :good:

Craig_CFC said:
Hello,
I have looked on xda for an answer before i started this thread but couln't really find the answer or solution i'm personally looking for.. The problem is a friend of mine is S-On with an ex-contract HTC One (M7) CID is something like VODA..... and his HBoot is 1.57.0000 - I'm trying to S-Off his phone so he can get rid of the Vodafone and Flash Firmware and European RUU (This is i can do) but i need to S-Off it 1st ... I installed TWRP so as to root his phone and unlocked the bootloader (HTCDev unlock token) BUT now the problem is, he's just had the Lollipop 5.02 OTA update and of course, cannot instal it with TWRP present :/ i was told just to flash Stock recovery over it? is this correct? and if so, how would i go about it please and how would i get S-Off on his mobile please? I'm lead to believe that Sunshine S-Off is the only option with that HBoot version.. ?
Many thanks in advance to xda and its members :good:
Click to expand...
Click to collapse
better to achieve s-off now before taking the ota update or you will need to wait for the new release of sunshine (3.0).
Yes sunshine is the only way to achieve s-off on hboot 1.57.
Achieve s-off
change cid to HTC__001
change mid (if required) to PN0710000
flash the latest ruu 7.19.401.2

alray said:
better to achieve s-off now before taking the ota update or you will need to wait for the new release of sunshine (3.0).
Yes sunshine is the only way to achieve s-off on hboot 1.57.
Achieve s-off
change cid to HTC__001
change mid (if required) to PN0710000
flash the latest ruu 7.19.401.2
Click to expand...
Click to collapse
Thank you - Yes, the CID i was going to change to HTC___001 and the RUU i have is: RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1
Firmware:
fw_4.19.401.9_custom.zip
So would i just look for a European RUU with that No. (7.19.401.2)?
and is that Firmware ok please?
I really aappreciate the help here.
And Sunshine S-Off it is
is this any good please? https://www.androidfilehost.com/?fid=95916177934533542

I meant to add - i can flash the Firmware with S-On can't i? as it's custom.. do i need to be rooted for that? and once firmware has been flashed i will need to Sunshine S-Off or Sunshine 1st then the rest? can i instal that RUU on S-On? If so i will just go ahead (without updating to 5.02) ..would this be ok? I think i need S-Off to chaange CID though dont i? so Sunshie 1st it would be?

Craig_CFC said:
Thank you - Yes, the CID i was going to change to HTC___001 and the RUU i have is: RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1
Firmware:
fw_4.19.401.9_custom.zip
So would i just look for a European RUU with that No. (7.19.401.2)?
and is that Firmware ok please?
I really aappreciate the help here.
And Sunshine S-Off it is
is this any good please? https://www.androidfilehost.com/?fid=95916177934533542
Click to expand...
Click to collapse
Check in the general section, thread "htc one European ruu" 7.19.401.2 ruu in the OP. Flash using htc's version of fastboot available at page 4 of same thread. Sorry can post link atm.

alray said:
Check in the general section, thread "htc one European ruu" 7.19.401.2 ruu in the OP. Flash using htc's version of fastboot available at page 4 of same thread. Sorry can post link atm.
Click to expand...
Click to collapse
Thank you, i have Fastboot and ADB already set up on my laptop - i will look for that now, thanks again alray :good:

Craig_CFC said:
Thank you, i have Fastboot and ADB already set up on my laptop - i will look for that now, thanks again alray :good:
Click to expand...
Click to collapse
No you don't understand, you must use the fastboot version posted at page 4 or it will not work. Read the post you'll understand. The regular fastboot from the Android sdk won't work for this RUU.

I see now ..i got the HTC_Fastboot.exe ...is this correct? also, i'm downloading the European.RUU now .. will this come with the Firmware.zip or will i need to search and flash that 1st please? i'm sorry if i'm confusing the issue but i'm really quite new at this and don't totally understand.. also, would the CID still be HTC___001 and can i change that with s-on? 'fastboot oem writecid'
I need to change CID 1st dont i? then Firmware then RUU? then finally S-Off with sunshine before the 5.02 update

ok i've got fw_7.19.401.2-NoRed_NoWipe Firmware and will read up on how to use the htc_fastboot.exe

Craig_CFC said:
I see now ..i got the HTC_Fastboot.exe ...is this correct? also, i'm downloading the European.RUU now .. will this come with the Firmware.zip or will i need to search and flash that 1st please? i'm sorry if i'm confusing the issue but i'm really quite new at this and don't totally understand.. also, would the CID still be HTC___001 and can i change that with s-on? 'fastboot oem writecid'
I need to change CID 1st dont i? then Firmware then RUU? then finally S-Off with sunshine before the 5.02 update
Click to expand...
Click to collapse
The European RUU is HTC___001. If your phone is s on you cannot change your CID. You need s off to do that

Craig_CFC said:
ok i've got fw_7.19.401.2-NoRed_NoWipe Firmware and will read up on how to use the htc_fastboot.exe
Click to expand...
Click to collapse
do not flash that firmware whilst s-on, its modified firmware and will brick your phone, you need s-off to change your CID or falsh any different firmware than vodafone firmware.

I discovered that last night i kinda knew anyway that i could not change the CID without S-Off but with everything going on i forgot.. iv'e decided to stick Android Revolution HD 91.1 on his HTC One.. at least he'l have 5.02 and a quick & reliable OS ... iv'e head that 5.02 is the last OTA update for the M7 so it wouldn't matter if he can't update ..cheers for your help anyway

Sorry, i only read half your reply - will i need to change CID for Android Revolution HD? will this be safe to flash onto his device please?

Craig_CFC said:
Sorry, i only read half your reply - will i need to change CID for Android Revolution HD? will this be safe to flash onto his device please?
Click to expand...
Click to collapse
no need to change cid, you can flash any custom rom on any CID.
whats your current firmware version, it will be something like 6.09.161.??
---------- Post added at 12:19 PM ---------- Previous post was at 11:38 AM ----------
Craig_CFC said:
Sorry, i only read half your reply - will i need to change CID for Android Revolution HD? will this be safe to flash onto his device please?
Click to expand...
Click to collapse
here you go mate, full RUU Lollipop update for vodafone: https://www.androidfilehost.com/?fid=95916177934540895
Download and flash using htc_fastboot.exe https://www.androidfilehost.com/?fid=95916177934539737, locked / relocked bootloader is required.

Thank You - i am downloading that now
whats your current firmware version, it will be something like 6.09.161.??
Click to expand...
Click to collapse
I'm unsure on that right now as i dont have the phone with me but i'm going there soon and i will post the firmware version here before i go ahead and do anything - thanks again

Thank you everyone for all your help ..in the end i just flashed Android Revolution HD 91.1 ..he's happy with that and he's got his Lollipop 5.02 now i'll keep the Voda RUU for future reference - thanks again!
Craig

[Q] Can I downgrade 6.06 to 1.29 with S-OFF

Hi all, I was just wondering if I should run the RUU ZIP or EXE if I am on S-OFF.
I currently have the 6.06.401.1 firmware along with the stock 6.06.401.1 rom. I need to return to the stock 1.29.707.1 for my HTC__044 before taking the latest OTA to Android Lollipop.
So far, I have used my S-OFF to change my bootloader to *LOCKED* and flashed stock recovery and stock rom for the 6.06.401.1.
I currently have both the 1.29.707.1 RUU EXE and ZIP. Which one should I use? I read that I need to have the 1.44 Hboot but I currently have the 1.54 Hboot.
Halp?

uhm, what? this is nonsense , the lastest available RUU is "4.19.401.9" which must be flashed under hboot 1.56 ... there is no need to go to initial release of android 4.1!
WARNING!!! YOU MUST FLASH HBOOT 1.56 BEFORE APPLYING 4.19.401.9 RUU
RUU: http://d-h.st/KmT
+There is no need to LOCK your bootloader to get an OTA update... Mine is always unlocked and never had a problem with OTA's
+RUU's work only under S-OFF

Androidian10 said:
Hi all, I was just wondering if I should run the RUU ZIP or EXE if I am on S-OFF.
I currently have the 6.06.401.1 firmware along with the stock 6.06.401.1 rom. I need to return to the stock 1.29.707.1 for my HTC__044 before taking the latest OTA to Android Lollipop.
So far, I have used my S-OFF to change my bootloader to *LOCKED* and flashed stock recovery and stock rom for the 6.06.401.1.
I currently have both the 4.20.707.1 RUU EXE and ZIP. Which one should I use? I read that I need to have the 1.44 Hboot but I currently have the 1.54 Hboot.
Halp?
Click to expand...
Click to collapse
you can use the RUU you have fine 4.20.707.1, you'll just have to make sure your cid and mid match first, and also just flash the 4.20.707.1 firmware first, this will put you on the correct HBOOT and system files for the RUU, no need to lock your bootloader with s-off.
or you can skip all of that and just flash the 7.19.401.2 RUU right now as your phone is as your already on the 6.xx.401.x firmware.
you don't really have any reason to back flash.

Seanie280672 said:
you can use the RUU you have fine 4.20.707.1, you'll just have to make sure your cid and mid match first, and also just flash the 4.20.707.1 firmware first, this will put you on the correct HBOOT and system files for the RUU, no need to lock your bootloader with s-off.
or you can skip all of that and just flash the 7.19.401.2 RUU right now as your phone is as your already on the 6.xx.401.x firmware.
you don't really have any reason to back flash.
Click to expand...
Click to collapse
But I can't seem to find a 4.20.707.1 RUU. I only have the 1.29.707.3 firmware. I need a region specific one because I need to trade my phone in.
Could you point me in the direction of a 4.20.707.1 RUU zip?
Also, is it safe to OTA update if I flash back to 1.29 with S-OFF?
Edit: Crap I made a typo in my OP, I mean that I have the 1.29 RUU EXE and ZIP right now.

Androidian10 said:
But I can't seem to find a 4.20.707.1 RUU. I only have the 1.29.707.3 firmware. I need a region specific one because I need to trade my phone in.
Edit: Crap I made a typo in my OP, I mean that I have the 1.29 RUU EXE and ZIP right now.
Could you point me in the direction of a 4.20.707.1 RUU zip?
Also, is it safe to OTA update if I flash back to 1.29 with S-OFF?
Click to expand...
Click to collapse
I thought you said you had the 4.20.707.1 RUU
if not then you'll have to use the 1.29.707 one that you have, you'll just have to flash the 1.44 hboot first or the firmware that matches the RUU.

Seanie280672 said:
I thought you said you had the 4.20.707.1 RUU
if not then you'll have to use the 1.29.707 one that you have, you'll just have to flash the 1.44 hboot first or the firmware that matches the RUU.
Click to expand...
Click to collapse
Yeah I had a typo.
So yeah, I have both the EXE and ZIP RUU.
I'm thinking that the ZIP RUU has the 1.44 hboot no?
Also, most importantly, can I take official OTA updates while I am S-OFFed?

Androidian10 said:
Yeah I had a typo.
So yeah, I have both the EXE and ZIP RUU.
I'm thinking that the ZIP RUU has the 1.44 hboot no?
Also, most importantly, can I take official OTA updates while I am S-OFFed?
Click to expand...
Click to collapse
yes you can take OTA's whilst s-off, do not go s-on at any point.
I would also say try the RUU.zip first.

Seanie280672 said:
yes you can take OTA's whilst s-off, do not go s-on at any point.
I would also say try the RUU.zip first.
Click to expand...
Click to collapse
Righto. Will report back again.
I hope the guy at the store doesn't go into the bootloader when I trade my m7 in. Even then I already set the flag to locked so I think he'll miss that S-OFF portion.

Androidian10 said:
Righto. Will report back again.
I hope the guy at the store doesn't go into the bootloader when I trade my m7 in. Even then I already set the flag to locked so I think he'll miss that S-OFF portion.
Click to expand...
Click to collapse
cid and mid need to match the ruu your flashing first.

Seanie280672 said:
cid and mid need to match the ruu your flashing first.
Click to expand...
Click to collapse
Already checked with fastboot getvar all.

Seanie280672 said:
cid and mid need to match the ruu your flashing first.
Click to expand...
Click to collapse
Actually, problem. :/
I have a matching CID which is HTC__044 but the modelid is PN0714000.
The RUU's android-info has a matching CID of HTC__044 but a modelid of PN0711000.
What now?

Androidian10 said:
Actually, problem. :/
I have a matching CID which is HTC__044 but the modelid is PN0714000.
The RUU's android-info has a matching CID of HTC__044 but a modelid of PN0711000.
What now?
Click to expand...
Click to collapse
unlock your bootloader, flash twrp recovery and change your mid, are you sure your using the RUU for the M7_UL as that looks a lot like the M7_U mid too me, can you give me a link for the RUU's you downloaded please.
---------- Post added at 11:05 AM ---------- Previous post was at 10:57 AM ----------
here you go, do this instead, this is going to be a bit backwards and forwards.
Unlock your bootloader, and flash TWRP recovery, then use the mid change tool to change your mid to the correct one.
https://www.androidfilehost.com/?fid=23622183712469376
next copy this guru reset file to your internal storage and flash it, select no to stock radio and no to stock recovery: http://www.htc1guru.com/2013/11/guru-reset-3-63-707-4-stock-rom/
now lock your bootloader
and finally flash the matching firmwqare from here: http://d-h.st/BWu this will put stock recovery and stock radio on your phone.

Seanie280672 said:
unlock your bootloader, flash twrp recovery and change your mid, are you sure your using the RUU for the M7_UL as that looks a lot like the M7_U mid too me, can you give me a link for the RUU's you downloaded please.
Click to expand...
Click to collapse
I actually ran the RUU. It's now stuck on waiting for device after the usual flush after 90 hboot pre-update.
I changed the modelid in the android-info.txt since it was decrypted.

Anyone help me?
My computer can't see the device anymore after flashing the hboot!

Androidian10 said:
Anyone help me?
My computer can't see the device anymore after flashing the hboot!
Click to expand...
Click to collapse
if your using windows 8 or higher then that's the problem, HBOOT 1.44 doesn't work with it, there is a fix around here somewhere by @clsA but ive never had to use it myself.
trouble with changing the android-info text file is all of the OTA's will fail due to you having the wrong mid on your phone, you'll have to change your phones mid as soon as possible.

Seanie280672 said:
if your using windows 8 or higher then that's the problem, HBOOT 1.44 doesn't work with it, there is a fix around here somewhere by @clsA but ive never had to use it myself.
trouble with changing the android-info text file is all of the OTA's will fail due to you having the wrong mid on your phone, you'll have to change your phones mid as soon as possible.
Click to expand...
Click to collapse
Ok, I have changed to an old Windows 7 laptop and tried doing the fastboot flash zip again. After I press enter, nothing happens at all. Not a single code at all. Just a blinker.
Edit: Started moving again. Phew. I almost had a heart attack.
So now do I do the fastboot writemid command?

Androidian10 said:
Ok, I have changed to an old Windows 7 laptop and tried doing the fastboot flash zip again. After I press enter, nothing happens at all. Not a single code at all. Just a blinker.
Edit: Started moving again. Phew. I almost had a heart attack.
So now do I do the fastboot writemid command?
Click to expand...
Click to collapse
to change the mid you need to use the mid change tool I posted a link to it earlier, install it inside twrp recovery then select the mid you require from the list it gives you.

Seanie280672 said:
to change the mid you need to use the mid change tool I posted a link to it earlier, install it inside twrp recovery then select the mid you require from the list it gives you.
Click to expand...
Click to collapse
It's okay now. I found a matching mid RUU for my phone.
But my question now is should I go S-ON to remove the red "This is a test device. Accordingly, to collect critical information about the device, Tell HTC is enabled and cannot be turned off regardless of device settings" warning? Or just leave it S-OFF and hope that the techies at the store doesn't notice it?

More questions
I have done all the OTAs now so should I do the fastboot oem writesecureflag 3 as the final step before putting the phone aside to trade it in?

Androidian10 said:
More questions
I have done all the OTAs now so should I do the fastboot oem writesecureflag 3 as the final step before putting the phone aside to trade it in?
Click to expand...
Click to collapse
no, leave it s-off, if you turn it back s-on now you will get the tampered flag back.