need assistance!! - Xperia Z Q&A, Help & Troubleshooting

I was in the proces of updating my ROM (pacman) to latest version,
flashed boot.img in fastboot..
went into twrp, and accidental deleted everything.. nothing to flash, and i cannot mount the phone to my pc in twrp
Now all my phone does it boot into the pacman loading screen and doesnt move from there.
I think i need a tft to fastboot

Use flashtool to re-flash

Related

[Q] Accidentally wiped system and now I can't boot into recovery

I followed all of the instructions in the Nexus 6 Guide to unlock, root and flash a custom recovery.
I was trying to sideload a rom into my phone and was doing advanced wipe in TWRP. I accidentally choose system thinking it would be fine since I am flashing a new rom anyway.
I think I force shut down the phone and now it just stays and hangs on the google logo. I can only get into the bootloader/fastboot. When I try getting into TWRP recovery it just flashes for a second and then attempts to reboot.
I figure I should try flashing a rom via adb bootloader/fastboot but I attempted a few times and failed. Can someone help walk me through this?
Edit: I can access TWRP recovery now... I tried doing sideload several more times but for some reason I keep getting loading rom.zip cannot read rom.zip
Well i going to geuss you know to to get to recovery though bootloader thought your phone
But your phone is semi Bricked
You can download wugs toolkit
And i will show unroot/flash stock you will click bootloop/ bricked and go though the steps
And it will download the stock software and reovery and go though the steps you will be fine
If you want use the same toolkit and root and install twrp again
Do you use a USB otg drive? If you don't you can send a rom to twrp using some commands.
Try to redownload the ROM that won't work and put it on the phone via a USB otg drive or using your pc and don't forgot gaps.
If you're not, use the WUG toolkit to reflash the stock ROM. Then you can use that to flash your new ROM
Unless im missing somethimg, why not just flash the factory image through fastboot and start over?
Like mentioned above, or just flash TWRP in fastboot. Then boot into TWRP, and flash ROM.

Looking for help with failed flash.

Hi. I have a Xperia Z1 C6903 (honami) and I tried to install Cyanogenmod on it by following this tutorial:
http://wiki.cyanogenmod.org/w/Install_CM_for_honami
What I did:
1. Unlocked bootloader, had no problems with that.
2. Went to fastboot, flashed over Boot.img, after that I couldn't get to recovery (probably because I didn't install it first)
3. Tried another Boot.img for the Free Xperia project, after that my device had a flashing red light.
4. Reflashed the previous CM Boot.img back.
3. I was told to install recovery, so I installed TWRP (Still couldn't get to recovery mode)
http://forum.xda-developers.com/xperia-z1/general/rec-twrp-2-8-6-0-z1-honami-t3074845
Now I've downloaded Flashtool along with a general FTF file, my next plan was to flash the whole thing, but I'm asking if there was something I did wrong and how to fix up this mess?
Right now by going into recovery mode I get stuck at Sony logo, tried waiting 10 minutes but nothing.
EDIT: Tried to fix it by installing Emma, reinstalled stock lollipop ROM, and TA (I think that's recovery) and nothing, can't even see sony logo anymore
EDIT2: Flashed stock ROM with Flashtool, still doesn't work...

[Solved]C5503 Softbrick Red LED is flashing

hey guys!
I've done something stupid with my ZR and not the vibra call just vibrates twice and the red LED is flashing when i wan't to turn on the phone.
But step by step: the phone has XZDualrecovery 2.8.26 with TWRP 2.8.7.0 and the "lastest official stockrom which is 5.1.1 and root.
I tried to update to TWRP 3.0 in the TWRP menu, but i've done something wrong i guess. there was only one option to choose, i cant remember exactly -perhaps it was something with boot partition?! And now it stucks at the red led right after pressing the power button.
is there any chance to bring it back to life again? is it possible to flash just the boot partion again? Which files should i include/exclude in flashtool?
flashtool can detect the phone in flashmode and also in fastboot mode!
flashed the ftf again, but excludes the wipe of user data and apps! -problem solved! :good:
a mod can delete this post.
Is that your phone bootloader unlocked?It will be easy if your phone UB so only by command shell you can flash the recovery img and flash rom from the recovery.What you have tried is wrong.You should install the recovery to recovery partition.Or if you want to flash stock rom from the flashtool do nothing and flash directly.
well,remember the first line to get job easily done.

NEM L-21 Bootloop

After unlocking my bootloader on my NEM L-21 I installed TWRP too, it all worked fine and well and then I decided to flash a CM13 ROM, before doing that I wiped my cache and userdata, I tried flashing it but then it threw me errors about not being able to mount /cust, I decided to restart it and leave it for later but now after restarting I can't boot into my system.
It restarts by itself if I try booting into the system, booting into the erecovery is useless since it cant find a firmware for my phone to download, and whenever I try booting into TWRP it gets stuck on a screen with "Your device is booting now...".
Any ideas on how to access TWRP or possibly flash the stock rom? Fastboot refuses to do it.
PraiseTheFiddle said:
After unlocking my bootloader on my NEM L-21 I installed TWRP too, it all worked fine and well and then I decided to flash a CM13 ROM, before doing that I wiped my cache and userdata, I tried flashing it but then it threw me errors about not being able to mount /cust, I decided to restart it and leave it for later but now after restarting I can't boot into my system.
It restarts by itself if I try booting into the system, booting into the erecovery is useless since it cant find a firmware for my phone to download, and whenever I try booting into TWRP it gets stuck on a screen with "Your device is booting now...".
Any ideas on how to access TWRP or possibly flash the stock rom? Fastboot refuses to do it.
Click to expand...
Click to collapse
Download the official firmware. Extract it using "huawei update extractor". There u will find recovery. Put ur phone in bootloader mode, by volume - & power button. Flash the recovery. Put the dload folder in ur sdcard. Then by the three button procedure, flash it.

Stuck on LOGO...... Redmi 9c

I tried to update my firmware using pitch black recovery
https://forum.xda-developers.com/t/...-0-0-pitch-black-recovery-31-12-2020.4211697/
But it couldn't boot anymore...
When i flashed firmware it showed an error and rebooted. After that i wasn't able to boot it into my system. I tried formating data and wiping data but nothing happened.
So i extracted original boot.img from firmware file and flashed it. After talhat my device just stuck at logo. I am not able to boot into recovery nor into fastboot mode.
Plz guys tell me if there is anything i can do to make everything right?
I tried to update my firmware using pitch black recovery
https://forum.xda-developers.com/t/...-0-0-pitch-black-recovery-31-12-2020.4211697/
But it couldn't boot anymore...
When i flashed firmware it showed an error and rebooted. After that i wasn't able to boot it into my system. I tried formating data and wiping data but nothing happened.
So i extracted original boot.img from firmware file and flashed it. After talhat my device just stuck at logo. I am not able to boot into recovery nor into fastboot mode.
Plz guys tell me if there is anything i can do to make everything right?
QAD765 said:
I tried to update my firmware using pitch black recovery
https://forum.xda-developers.com/t/...-0-0-pitch-black-recovery-31-12-2020.4211697/
But it couldn't boot anymore...
When i flashed firmware it showed an error and rebooted. After that i wasn't able to boot it into my system. I tried formating data and wiping data but nothing happened.
So i extracted original boot.img from firmware file and flashed it. After talhat my device just stuck at logo. I am not able to boot into recovery nor into fastboot mode.
Plz guys tell me if there is anything i can do to make everything right?
Click to expand...
Click to collapse
Boot into fastboot (I had to first hold pwr+volup fand when screen goes black hold pwr+voldwn). Download stock fastboot ROM and run flash_all.bat
QAD765 said:
I tried to update my firmware using pitch black recovery
https://forum.xda-developers.com/t/...-0-0-pitch-black-recovery-31-12-2020.4211697/
But it couldn't boot anymore...
When i flashed firmware it showed an error and rebooted. After that i wasn't able to boot it into my system. I tried formating data and wiping data but nothing happened.
So i extracted original boot.img from firmware file and flashed it. After talhat my device just stuck at logo. I am not able to boot into recovery nor into fastboot mode.
Plz guys tell me if there is anything i can do to make everything right?
Click to expand...
Click to collapse
Install the default Stock system again from the recovery, also if the recov does not work for you
Install the default Stock system again from the recovery, also if the recovery does not work, use another one like OFOX recovery (Orange fox) and install the stock system from there, Install the phone's stock firmware or 12.0.10.
Stock ROMs MIUI Angelica: https://xiaomifirmwareupdater.com/archive/miui/angelica/

Categories

Resources