[Q] Omar-ROM Bootloop - RAZR i Q&A, Help & Troubleshooting

Hi there,
today i tried to install omar-rom. Booted into CWM-Recovery - data wipe/factory reset, wipe cache, wipe dalvik-cache, mount and format /system. After that i installed the zip and rebooted the device.
And here is my problem, it won't boot properly, first time it boots into system, i see the app optimizing tab and immediately first reboot, after that it reboots while the motologo is shown or while the intel logo is shown... this goes over and over.
Two weeks ago i tried omar-rom, there was no problem. In the last two weaks i used original firmware with infini-ROM, infini-ROM still works when i use my untouched backup with these mods - omar rom doesn't. Tried Omar-Rom from 06.19 and 06.20, same result.
Anybody had similar problems, anybody can help?
PS: Sry 4 my bad english, im not a native speaker.

FourOne82 said:
Hi there,
today i tried to install omar-rom. Booted into CWM-Recovery - data wipe/factory reset, wipe cache, wipe dalvik-cache, mount and format /system. After that i installed the zip and rebooted the device.
And here is my problem, it won't boot properly, first time it boots into system, i see the app optimizing tab and immediately first reboot, after that it reboots while the motologo is shown or while the intel logo is shown... this goes over and over.
Two weeks ago i tried omar-rom, there was no problem. In the last two weaks i used original firmware with infini-ROM, infini-ROM still works when i use my untouched backup with these mods - omar rom doesn't. Tried Omar-Rom from 06.19 and 06.20, same result.
Anybody had similar problems, anybody can help?
PS: Sry 4 my bad english, im not a native speaker.
Click to expand...
Click to collapse
Exactly the same! It goes up to intel logo, then blacks out, sometimes i see optimizing tab, and bootloop.

Then we 2 are doing something wrong - I tried to explain exactly what I did, hope someone know what I did wrong.
But i feel like a retard, so many people use Omar-Rom without problems...

FourOne82 said:
Then we 2 are doing something wrong - I tried to explain exactly what I did, hope someone know what I wrong.
But i feel like a retard, so many people use Omar-Rom without problems...
Click to expand...
Click to collapse
I flashed it once with no problems, might be firmware related... I wipe and install but still it doesn't boot. infini works fine btw

anerik said:
I flashed it once with no problems, might be firmware related... I wipe and install but still it doesn't boot. infini works fine btw
Click to expand...
Click to collapse
exactly the same 4 me here

I did the wipe and factory reset .... then install zip and reboot. I did not put no mount and sistem
Sent from my XT890 using xda premium

First time i installed omar-ROM i did the same, now i tryed some times and nothing works...

if you have backup back .............. and installs another via fastboot and erase everything again had the omar to the days slowly began to return to normal by fastboot
Sent from my XT890 using xda premium

zipi23 said:
if you have backup back .............. and installs another via fastboot and erase everything again had the omar to the days slowly began to return to normal by fastboot
Sent from my XT890 using xda premium
Click to expand...
Click to collapse
What? Can you explain again?

well personally I did download the jellybean eu rom and installed via fastboot or rom pillama deves have usb debugging install . by omar the flash recovery to install any rom do cache factory reset and reboot in cmw
Sent from my XT890 using xda premium

So you think that not installing via fastboot is the problem or what? Because i dont think so, it worked like a charm 2 weeks ago...

zipi23 said:
well personally I did download the jellybean eu rom and installed via fastboot or rom pillama deves have usb debugging install . by omar the flash recovery to install any rom do cache factory reset and reboot in cmw
Sent from my XT890 using xda premium
Click to expand...
Click to collapse
So, you say we use fastboot to return to stock fw and then install the rom as normal, or over pillama?

Flashed stock via RSD-lite, tryed to install omar-ROM with CWM after that - same result, bootloop.
Rryed everything possible now, nothing works - am I stupid or is there a problem with the last versions of omar-ROM?

I'll try flashing it over another firmware, it worked on retail br for me once
EDIT: Bootloop again, got up to optimizing apps and then reboot... This is so weird

I flashed "Retail Central Europe", same result as you mate.

FourOne82 said:
I flashed "Retail Central Europe", same result as you mate.
Click to expand...
Click to collapse
Well we must be doing something wrong lol

Indeed, but what?

Make sure you have a custom recovery installed.
Download the *.zip file to your SD.
Boot into your custom recovery of choice.
<Optional when upgrading same ROM> Data wipe will be required if you came from another ROM, even stock EU.
Select install zip from external card, and choose the zip file.
Hit Reboot.
Sent from my XT890 using xda premium

This is exactly what i did the first time, result bootloop - tested with 2 versions of omar-ROM.

FourOne82 said:
This is exactly what i did the first time, result bootloop - tested with 2 versions of omar-ROM.
Click to expand...
Click to collapse
What about install stock eu version with rsd
Then set up everithing
After, install omars rom without wipe
Intel device - Razr i Owner
Hit thanks if i help you or you like my style

Related

Stock firmware problem after Cyanogenmod

A friend of mine suggested that I try Cyanogenmod, so I decided to flash my Galaxy Mini. The first problem was the bootloop, and no matter how many times I wiped the phone, it was always stuck at the Android text. So I decided to try the Honeycomb mod. Same happened. So I decided to flash it with Android 2.3.6 from sammobile.com. At last, it started working. However, Google Play still sees every application as "installed" (but of course they aren't), and when I try to delete from GP, nothing happens. After trying to install other applications, I realized that I cannot install anything from the market. Any idea how I could solve this problem? I would be very grateful.
did you flash your costom rom trough clockworld mod recovery (CMW)???
lackhoo said:
did you flash your costom rom trough clockworld mod recovery (CMW)???
Click to expand...
Click to collapse
He can't flash it by an another way
Sent from my GT-I9400 using XDA Premium
lackhoo said:
did you flash your costom rom trough clockworld mod recovery (CMW)???
Click to expand...
Click to collapse
Yes I did. I used CWM 5.0.2.6. The funny part is that after being turned off 3 times, Google Play started working But if there's a solution to the bootloop problem I would love to hear it. I searched this forum and the internet and nothing, even though I followed a cyanogenmod wiki's guide.
did you wipe two times before and after flashing cyanogenmod rom
How old is your sd card? because same happened to me. I needed to format my sd card.
Rekesz said:
Yes I did. I used CWM 5.0.2.6. The funny part is that after being turned off 3 times, Google Play started working But if there's a solution to the bootloop problem I would love to hear it. I searched this forum and the internet and nothing, even though I followed a cyanogenmod wiki's guide.
Click to expand...
Click to collapse
Thanked accidentally.
Anyway, tour problem is the CWM you used, didnt u see the DONT USE sign in the version 5.0.2.6 thread? 5.0.2.8 would avoided those errors in flashing custom ROMs
Sent from my GT-S5570 using xda premium
My SD card is as old as my phone, about 9 months old.
No, I didn't see the sign, and to be honest, I didn't even know that there was a 5.0.2.8 version. Do you think it would work with that?
try flash cm7 trough this recovery---->forum.xda-developers.com/showthread.php?t=1342190 i think this in the best cmw........
Rekesz said:
My SD card is as old as my phone, about 9 months old.
No, I didn't see the sign, and to be honest, I didn't even know that there was a 5.0.2.8 version. Do you think it would work with that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1529863 there it is.
I'm sure it works. 5.0.2.6 had some issues as said in the thread, but 5.0.2.8 or 4.0.0.5 works fine. Try it
PM me anything GT-S5570
So I downloaded the new recovery, flashed it via Odin, and now nothing works. When I enter recovery it says that it can't mount /cache/log and /cache/recovery (I think it says these two). I looked around and found that it could be stuck in a bootloop, but luckily Android loads. However, I can't root my phone due to several errors, so I can't install Cyanogen mod. I think I'll give up now But thanks for all the help!
Rekesz said:
So I downloaded the new recovery, flashed it via Odin, and now nothing works. When I enter recovery it says that it can't mount /cache/log and /cache/recovery (I think it says these two). I looked around and found that it could be stuck in a bootloop, but luckily Android loads. However, I can't root my phone due to several errors, so I can't install Cyanogen mod. I think I'll give up now But thanks for all the help!
Click to expand...
Click to collapse
This happens because you are in stock ROM, this errors are normal.If you want ONLY to root your phone you should use stock recovery. Otherwise you can proceed.
PM me anything. GT-S5570
Trublood_ said:
This happens because you are in stock ROM, this errors are normal.If you want ONLY to root your phone you should use stock recovery. Otherwise you can proceed.
PM me anything. GT-S5570
Click to expand...
Click to collapse
Okay. So I flashed the stock ROM back so I can use the stock recovery. Phone rooted-->still getting the same error :/ Sorry for bothering you all so many times, but I just can't understand why this does not work.
Rekesz said:
Okay. So I flashed the stock ROM back so I can use the stock recovery. Phone rooted-->still getting the same error :/ Sorry for bothering you all so many times, but I just can't understand why this does not work.
Click to expand...
Click to collapse
We are here to help you
What error? That one on CWM recovery
PM me anything. GT-S5570
Trublood_ said:
We are here to help you
What error? That one on CWM recovery
PM me anything. GT-S5570
Click to expand...
Click to collapse
Thanks very much Here is what I did step by step:
I returned to the stock recovery by installing the stock firmware. I rooted the phone with stock recovery. Then I installed CWM recovery 5.2.0.8, but I still get the same error in CWM: it can't mount a few things. I still tried installing Cyanogen without wiping, and of course it's stuck at the boot screen with the Android text (I had a feeling that it wouldn't work if the recovery is not fully operational, so I did not want to lose every contact for nothing again). I read that this problem can be solved by formatting the SDCard, so I tried formatting it with PC and the phone also, but nothing. So now I'm back to the stock firmware and recovery with my phone rooted and no idea how to solve any of the problems.
Rekesz said:
Thanks very much Here is what I did step by step:
I returned to the stock recovery by installing the stock firmware. I rooted the phone with stock recovery. Then I installed CWM recovery 5.2.0.8, but I still get the same error in CWM: it can't mount a few things. I still tried installing Cyanogen without wiping, and of course it's stuck at the boot screen with the Android text (I had a feeling that it wouldn't work if the recovery is not fully operational, so I did not want to lose every contact for nothing again). I read that this problem can be solved by formatting the SDCard, so I tried formatting it with PC and the phone also, but nothing. So now I'm back to the stock firmware and recovery with my phone rooted and no idea how to solve any of the problems.
Click to expand...
Click to collapse
Flasging CyanogenMod without wipes? Seriously? Thats exactly why it never worked!! CWM cant mount somethings because you were in stock ROM
Use some backup program to backup contacts, apps, whatever and flash cyanogenmod wiping data and cache before and after.
Sent from my GT-S5570 using xda premium
Rekesz said:
A friend of mine suggested that I try Cyanogenmod, so I decided to flash my Galaxy Mini. The first problem was the bootloop, and no matter how many times I wiped the phone, it was always stuck at the Android text. So I decided to try the Honeycomb mod. Same happened. So I decided to flash it with Android 2.3.6 from sammobile.com. At last, it started working. However, Google Play still sees every application as "installed" (but of course they aren't), and when I try to delete from GP, nothing happens. After trying to install other applications, I realized that I cannot install anything from the market. Any idea how I could solve this problem? I would be very grateful.
Click to expand...
Click to collapse
You Should get gapps for it or you should download .apk for any site........:good:
Thanks Button Ready For You.....:good:
Trublood_ said:
Flasging CyanogenMod without wipes? Seriously? Thats exactly why it never worked!! CWM cant mount somethings because you were in stock ROM
Use some backup program to backup contacts, apps, whatever and flash cyanogenmod wiping data and cache before and after.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
This was just a trial run due to the new CWM recovery. If you read back, I already wrote that I tried wiping both data and cache before and after flashing Cyanogen mod. This "mounting" problem only came up with the new CWM recovery, 5.2.0.8.
The basic Google Apps were all there, since I used a rom from sammobile.com, downloaded programs like poweramp were the ones that did not work.
Rekesz said:
This was just a trial run due to the new CWM recovery. If you read back, I already wrote that I tried wiping both data and cache before and after flashing Cyanogen mod. This "mounting" problem only came up with the new CWM recovery, 5.2.0.8.
The basic Google Apps were all there, since I used a rom from sammobile.com, downloaded programs like poweramp were the ones that did not work.
Click to expand...
Click to collapse
And you tried wipes using 5.2.0.8 version? The mounting problem happened with me only in this recovery too, maybe because it is updated, different or whatever but I flashed and everything was good. Anyway, stay with stock, it seems better for you.
Sent from my GT-S5570 using xda premium
Trublood_ said:
And you tried wipes using 5.2.0.8 version? The mounting problem happened with me only in this recovery too, maybe because it is updated, different or whatever but I flashed and everything was good. Anyway, stay with stock, it seems better for you.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Yes, I guess I will stay with the stock :/ Though I'll try again when a new CWM recovery and a new Cyanogen mod come out.

SGS I9000 too slow!

Hy everybody,
I have got a big problem with my i9000: it doesn't start up very properly i mean it takes a lot to start the S logo animation, the animation is very slow (really low fps) and it usually stuck at the end of the animation (only once i managed to arrive to the menu where you have to choose the language but the touchscreen was not responding). Even CWM recovery is slow! There is a lag while choosing the options. I also tried to reflash using stock Samsung ROMS such as XXJPU and XXJW7 but i get the same issue. Also tried to install custom ROM via CWM, i get the speed back but touch doesn't work! I have already searched on the site for this issue and got a thread that had exactly the same problem but didn't manged to get out from this situation (here is the thread http://forum.xda-developers.com/showthread.php?t=1422634, it's exactly the same issue!).
I have been flashing and repearing android devices for years and this is the first time i meet this kind of issue! Maybe it is a bootloader problem or motherboard, but i ask you experts before getting in troubles =)
Sorry for my bad english :victory:
Cheers :laugh:
I think it is a hardware problem mate(since you flashed too many roms...)
Rooting wont help you too so...
Even if you dont have warranty give it for repairing..
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Uhm i don t have warranty anymore but i'm able to disassembly and replace any piece i need. Hope it is not a motherboard prolem, but i can t image something different...
NotoriuStyle™ said:
Uhm i don t have warranty anymore but i'm able to disassembly and replace any piece i need. Hope it is not a motherboard prolem, but i can t image something different...
Click to expand...
Click to collapse
First pull out everything, Ext SD card, Sim Card, power up after a few min of pressing power button..get into CWM recovery and format SD card, everything and wipe... flash a rescue kit from My Android Collection, link below
If you cannot format Internal SD card in recovery use a Format tool from My Android collections link below to format it from PC
xsenman said:
First pull out everything, Ext SD card, Sim Card, power up after a few min of pressing power button..get into CWM recovery and format SD card, everything and wipe... flash a rescue kit from My Android Collection, link below
If you cannot format Internal SD card in recovery use a Format tool from My Android collections link below to format it from PC
Click to expand...
Click to collapse
When you say format everything do you mean format /boot too ? Thank u for your help =]
NotoriuStyle™ said:
When you say format everything do you mean format /boot too ? Thank u for your help =]
Click to expand...
Click to collapse
can be done, but If you don't have boot loader on the ROM , you will have problem, so avoid it , for now
xsenman said:
First pull out everything, Ext SD card, Sim Card, power up after a few min of pressing power button..get into CWM recovery and format SD card, everything and wipe... flash a rescue kit from My Android Collection, link below
If you cannot format Internal SD card in recovery use a Format tool from My Android collections link below to format it from PC
Click to expand...
Click to collapse
I did everything and than flashed "i9000 Rescue Darky's ROM Resurrection edition" but with no result, even the robotic voice of Darky's ROM is laggy!! Trying other rescue kit and will let you know
NotoriuStyle™ said:
I did everything and than flashed "i9000 Rescue Darky's ROM Resurrection edition" but with no result, even the robotic voice of Darky's ROM is laggy!! Trying other rescue kit and will let you know
Click to expand...
Click to collapse
remember to do full wipes /factory reset before and after flashing the ROM and Internal SD card must be formatted
xsenman said:
remember to do full wipes /factory reset before and after flashing the ROM and Internal SD card must be formatted
Click to expand...
Click to collapse
Yes i always wipe data, wipe cache, wipe dalvik and wipe battery stats. Tried even GB Flash Kit and Rescue Kit for i9000 using heimdall packed but nothing. Boot animation is always slow and after 1 hour, after getting loaded, touch doesn't work =(
Nothing ... tried everything excpet formatting /boot. Will i risk to brick my device if i choose that option ?
NotoriuStyle™ said:
Nothing ... tried everything excpet formatting /boot. Will i risk to brick my device if i choose that option ?
Click to expand...
Click to collapse
Nope, but you must not try to reboot after formatting it, . You need to power down, do a battery pull and flash a ROM package with boot loader for phone to function
xsenman said:
Nope, but you must not try to reboot after formatting it, . You need to power down, do a battery pull and flash a ROM package with boot loader for phone to function
Click to expand...
Click to collapse
I've done 3 wipes then the 5 formats (boot too) then while still in recovery flash Elite's JB RC 12.1 rom .. if problems then it's deff a hardware issue
Sent from my GT-I9300 using xda premium
jj92942000 said:
I've done 3 wipes then the 5 formats (boot too) then while still in recovery flash Elite's JB RC 12.1 rom .. if problems then it's deff a hardware issue
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Nothing =( every rom i flash via CWM gives speed back but touch doesn't work =S
NotoriuStyle™ said:
Nothing =( every rom i flash via CWM gives speed back but touch doesn't work =S
Click to expand...
Click to collapse
Then it's hardware .. any gb rom gives you touch?
Sent from my GT-I9300 using xda premium
jj92942000 said:
Then it's hardware .. any gb rom gives you touch?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Uhm every rom i tried via CWM, and even the stock rom when it gets loaded, doesn't give me a working touchscreen. This problem happened last month too and after flashing a lot of roms i managed to solve it in the end, but i was just lucky because i didn't know what the device had and i solved just flashing random ROMS and getting solved with XXJW7. That's why i'm not so sure it is a hardware problem =(
NotoriuStyle™ said:
Uhm every rom i tried via CWM, and even the stock rom when it gets loaded, doesn't give me a working touchscreen. This problem happened last month too and after flashing a lot of roms i managed to solve it in the end, but i was just lucky because i didn't know what the device had and i solved just flashing random ROMS and getting solved with XXJW7. That's why i'm not so sure it is a hardware problem =(
Click to expand...
Click to collapse
Try Elite JB RC12.1, if working on jw7, do a android backup, then you'll have to flash JVU 1st, if touch screen works then it'll work with the JB rom, here's a trick, instructions are there but do this. Backup everything to pc, take out sdcard, before flash jvu, do 3 wipes, data, cache, dalvik, then go to usb mount, format 5 items there, boot, data, cache, system, sdcard ( last wipes everything). Now do 3 wipes again, yes again, flash JVU, root, transfer Rom to sdcard, 3 wipes, do usb mount, then 4 formats (not sdcard), 3 wipes again, flash JB rom. If bootloop, no bigger it just flashed kernel, take battery out, wait back in recovery flash Rom. You'll be on JB.
Sent from my GT-I9300 using xda premium
dreamer94 said:
I think it is a hardware problem mate(since you flashed too many roms...)
Rooting wont help you too so...
Even if you dont have warranty give it for repairing..
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
Flashing your phone multiple times, does not make it slow. I have flash my phone almost every day, to check out new roms that are released every day and my phone hasn't slowed down a bit
---------- Post added at 04:16 PM ---------- Previous post was at 04:10 PM ----------
NotoriuStyle™ said:
Hy everybody,
I have got a big problem with my i9000: it doesn't start up very properly i mean it takes a lot to start the S logo animation, the animation is very slow (really low fps) and it usually stuck at the end of the animation (only once i managed to arrive to the menu where you have to choose the language but the touchscreen was not responding). Even CWM recovery is slow! There is a lag while choosing the options. I also tried to reflash using stock Samsung ROMS such as XXJPU and XXJW7 but i get the same issue. Also tried to install custom ROM via CWM, i get the speed back but touch doesn't work! I have already searched on the site for this issue and got a thread that had exactly the same problem but didn't manged to get out from this situation (here is the thread http://forum.xda-developers.com/showthread.php?t=1422634, it's exactly the same issue!).
I have been flashing and repearing android devices for years and this is the first time i meet this kind of issue! Maybe it is a bootloader problem or motherboard, but i ask you experts before getting in troubles =)
Sorry for my bad english :victory:
Cheers :laugh:
Click to expand...
Click to collapse
Why dont you try flashing your original firmware via Odin with "repartition" ticked. Once that is done, let your phone boot and see if there's and lag. If lag still persists, go to CMW, format system, boot and data and restart your phone and then check again
Touchscreen problem
NotoriuStyle™ said:
Hy everybody,
I have got a big problem with my i9000: it doesn't start up very properly i mean it takes a lot to start the S logo animation, the animation is very slow (really low fps) and it usually stuck at the end of the animation (only once i managed to arrive to the menu where you have to choose the language but the touchscreen was not responding). Even CWM recovery is slow! There is a lag while choosing the options. I also tried to reflash using stock Samsung ROMS such as XXJPU and XXJW7 but i get the same issue. Also tried to install custom ROM via CWM, i get the speed back but touch doesn't work! I have already searched on the site for this issue and got a thread that had exactly the same problem but didn't manged to get out from this situation (here is the thread http://forum.xda-developers.com/showthread.php?t=1422634, it's exactly the same issue!).
I have been flashing and repearing android devices for years and this is the first time i meet this kind of issue! Maybe it is a bootloader problem or motherboard, but i ask you experts before getting in troubles =)
Sorry for my bad english :victory:
Cheers :laugh:
Click to expand...
Click to collapse
Hey!! I tried various ROM combinations and it worked for a few months. Although even after a few days, the problem would reappear and I was forced to flash again(it started working after flashing about 30-50 ROMs). Finally, a month back, I came across the same problem again but this time, nothing worked. After hitting my head on the wall for a month, I finally gave it to the Samsung ppl and they figured that the problem was with the touchscreen!!(zoinks!!) They will replace the touchscreen and it would cost me $145(8,000INR , expired warranty). They'll return it in 4 days. I'll post more when I get my SGS back.
Hmm, looks to me, you must have flashed something wrong/flashing process goes wrong. I would suggest this 'solution':
1. Flash a new recovery system. I suggest the latest TWRP recovery or flash the latest CWM. To me, CWM has given me lots of problems. You can flash it through computer or through CWM using their flashable zip.
2. Once then, wipe everything! Data, cache, dalvik cache.
3. Next, format the system! If you formatted system, you will lose your current rom. Meaning the phone will not boot up until you install/flash a ROM.
4.Install necessary stuff like Google Apps
Done! Things should be working right now. I had problems like you, my phone sometimes takes 2-5 minutes to boot.
I'm using the Samsung Galaxy S Plus I9001. So, I flashed Acro86's ICS rom. Super smooth.
Hope I helped you!
Sent from my GT-I9001 using xda app-developers app
Hi, I have exactly the same problems.
I guess it's also touch error, I already changed it once and after the year and then started having problems as it was pressed alone, stuck all the time and stopped working. As I was reading and testing, I think I'll buy again the touch.
From Argentina.
Regards.

[Q] Flashing kernel through recovery problem

Hi.
After unlocking my HTC, installing recovery and a custom ROM (ARHD 13.3) I have a problem with flashing kernels through recovery. Every time when it starts, phone reboots into system, just after the flashing starts, withough flashing the kernel. Any ideas?
Anyone? :-\ tried reflashing Rom with full wipe, tried other roms, changed the recovery...always the same.
Sent from my HTC One using Tapatalk 4
s_o_r_e_n said:
Anyone? :-\ tried reflashing Rom with full wipe, tried other roms, changed the recovery...always the same.
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Sounds strange! What kernel are you trying to flash? Did you also make sure your download's MD5 is correct; could be a bad download.
Yes, md5 sum is correct. I'm trying to flash anything strange is that after full wipe and reflashing Rom I can flash anything before first boot. After first boot can't flash zip files, like Rom cleaner or kernel. Phone always reboots just after flashing starts.
Once I've found that someone had such problem and formating something through adb helped...but can't find this info again
I tried flashing almost every kernel available.
Sent from my HTC One using Tapatalk 4
s_o_r_e_n said:
Yes, md5 sum is correct. I'm trying to flash anything strange is that after full wipe and reflashing Rom I can flash anything before first boot. After first boot can't flash zip files, like Rom cleaner or kernel. Phone always reboots just after flashing starts.
Once I've found that someone had such problem and formating something through adb helped...but can't find this info again
I tried flashing almost every kernel available.
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
I think Rom Cleaner should be flashed before first boot anyway, but not the kernel. Are you clearing cache and dalvik before trying to flash?
Yes. I even clean cache through sdk :-\ yep, the Rom cleaner should be flashed before first boot, but anyway it shouldn't reboot even later as I think.
Sent from my HTC One using Tapatalk 4
s_o_r_e_n said:
Yes. I even clean cache through sdk :-\ yep, the Rom cleaner should be flashed before first boot, but anyway it shouldn't reboot even later as I think.
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Weird
Just for the sake of trying, a couple of ideas:
1- wipe the cache from recovery (not fastboot) and also wipe dalvik, then immediately flash kernel
2- perhaps there's a permission issue with the zip(s) / folder(s)
EDIT: perhaps you need to update recovery?
I reflashed recovery, tried CWM, TWRP...same on both think about going back to stock with RUU, then trying everything again from the start:-\
First advance...tried.
Second...U mean fixing permissions? Don't know if it's related to that problem, but of course will try.
Sent from my HTC One using Tapatalk 4
s_o_r_e_n said:
I reflashed recovery, tried CWM, TWRP...same on both think about going back to stock with RUU, then trying everything again from the start:-\
First advance...tried.
Second...U mean fixing permissions? Don't know if it's related to that problem, but of course will try.
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Though I don't think custom recovery would have issues with permissions (since it's su privilege), it could be the folder where your zip files are doesnt have rw permission, and the recovery attempts to access the folder, is unable to, and therefore just reboots.
Try putting the zip file in a different directory (or maybe even the root folder) and try again.
In root folder? Don't understand where exactly...tried to place it on different locations in storage.
Sent from my HTC One using Tapatalk 4
s_o_r_e_n said:
In root folder? Don't understand where exactly...tried to place it on different locations in storage.
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
sorry, what I meant was /sdcard
which recovery are you using? send the link
Latest TWRP. I found that I can't even change the permissions to any file on sd card. But I have root access:-\ also tried fixing permissions.
Sent from my HTC One using Tapatalk 4
s_o_r_e_n said:
Latest TWRP. I found that I can't even change the permissions to any file on sd card. But I have root access:-\ also tried fixing permissions.
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Sorry, all out of ideas
No problem thank's for helping, will probably flash the RUU and start from beginning.
Sent from my HTC One using Tapatalk 4
Obvious question, but the kernel is for your version of Android isn't it? You're not flashing a 4.3 kernel on to 4.2.2?
of course not I'm on android 4.2.2 and flashing the 4.2.2 kernel version
---------------------------
as for now everything's ok. Frankly speaking I didn't do anything new. reflashed recovery for the third time i believe, did the full wipe also few times, flashed arhd, rom cleaner and the kernel one by one and it works...for now
---------------------------
and no..it's still the same. After first boot, I rebooted into recevery, tried to flash different zip and what....and reboot just after flashing:/ it makes me sick...:/
Thanks to one and all. I was facing the same issue of being unable to install the Bulletproof kernel on my HTC One having ViperOne 4.2.0 custom rom and TWRP 2.6.3.3 recovery.
I followed the advice here and wiped 'Dalvik cache' and 'cache' and (without rebooting) directly dirty flashed the Bulletproof kernel which did the trick.
Hope this helps someone else too.
Got the same problem. Tried with TWRP 2.6.6.3, 2.6.6.4 & actual CWM with failed tries to flash kernel,bootscreens,themes & the 360 camera fix.
Also tried to flash these recovery via fastboot and at least the m7&m7ul versions.
It happens suddenly
Btw: i'm on an tampered,unlocked hboot 1.54
Any help or ideas are much appreciated
Thesinistah86 said:
Got the same problem. Tried with TWRP 2.6.6.3, 2.6.6.4 & actual CWM with failed tries to flash kernel,bootscreens,themes & the 360 camera fix.
Also tried to flash these recovery via fastboot and at least the m7&m7ul versions.
It happens suddenly
Btw: i'm on an tampered,unlocked hboot 1.54
Any help or ideas are much appreciated
Click to expand...
Click to collapse
idky but after flashing arhd41 it seems to be better. I can flash in 90% of tries successfully...

P880 won't boot after 442 flashing

Hi guys,
Need your assistance in this. I downloaded the 4.4.2, the Gapps (stock version), and the CWM Touch 6044. Flashed successfully the 6044. Rebooted, and flashed omni 442 and then the gapps. Did a wipe data/factory reset. Then pressed reboot device. The phone will restart and stay stuck at the Omni Logo. No progress from there at all. Did a few other reboots and different combinations to the above but to no result. Stuck there. Finally, did a restore from my backup just to have a phone again..Any idea what I did wrong from the start?
How long did you wait at the first bootup? It took quite long for me, so I'd suggest waiting up to 20 minutes before turning off the phone. Try flashing with the most lightweight Gapps package, that's what everyone seems to be using. You could also try wiping cache and dalvik cache.
Nalefyre said:
How long did you wait at the first bootup? It took quite long for me, so I'd suggest waiting up to 20 minutes before turning off the phone. Try flashing with the most lightweight Gapps package, that's what everyone seems to be using. You could also try wiping cache and dalvik cache.
Click to expand...
Click to collapse
Well, did the Dalvik cache but later on, when I was experimenting. I had waited at least 16/18 minutes till my patience ran out...
Decided to have one more go right now. 1. Did a wipe data / factory reset. 2. After that, wiped Dalvik cache. 3. Presently installing Omni and then will install gapps. 4. Will reboot and leave it to boot until I leave work. (couple of hours from now). And will see what happens.
- Forgot to add thaty in all instances, I selected YES in the "root" question in the end. -
Thanks for replying!
---Update
Nothing changed. Stuck at the Omni logo for about 50 minutes..
The_Sniper said:
Well, did the Dalvik cache but later on, when I was experimenting. I had waited at least 16/18 minutes till my patience ran out...
Decided to have one more go right now. 1. Did a wipe data / factory reset. 2. After that, wiped Dalvik cache. 3. Presently installing Omni and then will install gapps. 4. Will reboot and leave it to boot until I leave work. (couple of hours from now). And will see what happens.
- Forgot to add thaty in all instances, I selected YES in the "root" question in the end. -
Thanks for replying!
---Update
Nothing changed. Stuck at the Omni logo for about 50 minutes..
Click to expand...
Click to collapse
So don't flash gapps and ROM back to back. Flash ROM then reboot and after waiting 5 mins reboot and flash gapps again.
Sent from my LG-P880 using XDA Premium 4 mobile app
Maybe format /system in addition to the factory reset (it's under mounts and storage). So you get a completely clean install
Sent from my LG Optimus 4X HD
Thanks for your advice guys - Unfortunately I don't see any results
I booted in recovery and in this order: Wiped data / did factory reset - then wiped Dalvik - then did format /system - then flashed successfully Omnirom and at the end select YES in the "root" question. Did not touch the Gapps.
Same result - has been in the Omni Logo for more than half an hour.
Can someone tell me the absolute prerequisites needed to install and boot normally? Apart from CWM Touch 6.0.4.4 that is?
Thanks in advance
I really don't see any more required steps to install OmniRom. Did you try another downloaded OmniRom? Maybe something is wrong with your used version.
Sent from my LG Optimus 4X HD
The_Sniper said:
Thanks for your advice guys - Unfortunately I don't see any results
I booted in recovery and in this order: Wiped data / did factory reset - then wiped Dalvik - then did format /system - then flashed successfully Omnirom and at the end select YES in the "root" question. Did not touch the Gapps.
Same result - has been in the Omni Logo for more than half an hour.
Can someone tell me the absolute prerequisites needed to install and boot normally? Apart from CWM Touch 6.0.4.4 that is?
Thanks in advance
Click to expand...
Click to collapse
Select No in the root option.
Sent from my LG-P880 using XDA Premium 4 mobile app
[email protected] said:
Select No in the root option.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That shouldn't do any damage (I tried both ways and didn't notice any difference )
I really think your downloaded ROM zip is corrupt as nobody else having problems with it
Sent from my LG Optimus 4X HD
Omario-242 said:
That shouldn't do any damage (I tried both ways and didn't notice any difference )
I really think your downloaded ROM zip is corrupt as nobody else having problems with it
Sent from my LG Optimus 4X HD
Click to expand...
Click to collapse
Yeah, will redownload - choosing NO also did not make any difference
Did you mount all under mounts and storage?
Coolneng said:
Did you mount all under mounts and storage?
Click to expand...
Click to collapse
all I did under mount & storage is the "format /system". Did not mount anything any other time. Is this part of the procedure too or are we shooting blind here? - Cause directions in the post say flash rom, flash apps, wipe data & reboot, let alone the 15 other combos I've done.
Haven't tried anything yet cause I need to re-download the ROM and presently I can't get any of my 3 PCs "see" the LG's contents like a flash drive. Can only do it in my work's laptop. Beats me why..
If you don't have important data, format internal storage too. No idea for 4.4, but if you flash kdz, this is a must.
Sent from my LG-P880 using XDA Premium 4 mobile app
[email protected] said:
If you don't have important data, format internal storage too. No idea for 4.4, but if you flash kdz, this is a must.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks Black, will try that too. Have everything I need in Helium right now, ready to be restored at any time.
The_Sniper said:
all I did under mount & storage is the "format /system". Did not mount anything any other time. Is this part of the procedure too or are we shooting blind here? - Cause directions in the post say flash rom, flash apps, wipe data & reboot, let alone the 15 other combos I've done.
Haven't tried anything yet cause I need to re-download the ROM and presently I can't get any of my 3 PCs "see" the LG's contents like a flash drive. Can only do it in my work's laptop. Beats me why..
Click to expand...
Click to collapse
It is important to mount everything as far as I know. In my old device's forum it always a step that is specified, I never see it in these forums though.
Try it, you don't loose anything.

Any custom rom - Boot loop

I've tried in twrp and cwm/cwm touch - I get a boot loop no matter which rom I flash
I made a backup of my stock 404 on cwm and twerp so It's easily reversible in either.
Similar to this post - http://forum.xda-developers.com/showthread.php?p=45795997#post45795997
It involves flashing Pi-llama 1.4 via adb and then installing the custom rom over the top.
Ran into all sorts of issues, would hang on the third data write, so I cancel it and then it would continue etc... and install
Now I'm up and running I've got half PiLlama and this rom I put on, battery drain is bad and the clock process crashes when I try and set an alarm. Otherwise it's great.
Any ideas? Seems to be the data partition causing the problems.
I'm rooted and unlocked, thought I'd add.
Flacid Monkey said:
I've tried in twrp and cwm/cwm touch - I get a boot loop no matter which rom I flash
I made a backup of my stock 404 on cwm and twerp so It's easily reversible in either.
Similar to this post - http://forum.xda-developers.com/showthread.php?p=45795997#post45795997
It involves flashing Pi-llama 1.4 via adb and then installing the custom rom over the top.
Ran into all sorts of issues, would hang on the third data write, so I cancel it and then it would continue etc... and install
Now I'm up and running I've got half PiLlama and this rom I put on, battery drain is bad and the clock process crashes when I try and set an alarm. Otherwise it's great.
Any ideas? Seems to be the data partition causing the problems.
Click to expand...
Click to collapse
Damn! Please can someone move this to http://forum.xda-developers.com/razr-i/help Posted it in here by accident
I you want to flash a custom rom just don't wipe data and don't do a format /wipe data
The problem with that is it has previous rom stuff still installed.
I like a clean fresh install of a rom, so no contacts, messages, apps etc...
There is no way to do this without a bootloop.
Flacid Monkey said:
The problem with that is it has previous rom stuff still installed.
I like a clean fresh install of a rom, so no contacts, messages, apps etc...
There is no way to do this without a bootloop.
Click to expand...
Click to collapse
flash a stock rom via rsd-lite..this will wipe the data too..then flash a custom rom
antkalaitzakis96 said:
flash a stock rom via rsd-lite..this will wipe the data too..then flash a custom rom
Click to expand...
Click to collapse
Boot loop.
Get to the rom boot animation and it does the updating apps then boot loops back to the moto screen and rom animation then repeats until i power off and restore a backup.
Thank you both for suggestions so far. Getting closer to solving
Sent from my XT890 using XDA Premium 4 mobile app
Flacid Monkey said:
Boot loop.
Get to the rom boot animation and it does the updating apps then boot loops back to the moto screen and rom animation then repeats until i power off and restore a backup.
Thank you both for suggestions so far. Getting closer to solving
Sent from my XT890 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
u using cwm?
before flash a rom -> wipe data /system / cache! / dalvik chache -> then flash!
if this dont help do above + wipe battery stats then flash the rom.
have fun.
regards
pangyaaaaaa said:
u using cwm?
before flash a rom -> wipe data /system / cache! / dalvik chache -> then flash!
if this dont help do above + wipe battery stats then flash the rom.
have fun.
regards
Click to expand...
Click to collapse
Yes, I'm using cwm. Tried touch and twrp.
Tried the above, same bootloop.
Only works if i leave my stock 404, push pillama 1.4 via adb and then flash the custom ROM over that in cwm.
This leaves residue from 404 and pillama on my phone though.
Sent from my XT890 using XDA Premium 4 mobile app
Flacid Monkey said:
Yes, I'm using cwm. Tried touch and twrp.
Tried the above, same bootloop.
Only works if i leave my stock 404, push pillama 1.4 via adb and then flash the custom ROM over that in cwm.
This leaves residue from 404 and pillama on my phone though.
Sent from my XT890 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Does stock 404 mean, you are still on ICS?
If so why don't you flash JB with RSD-Lite and try again installing a custom rom?
Can u make a logcat about it?
ICuaI said:
Does stock 404 mean, you are still on ICS?
If so why don't you flash JB with RSD-Lite and try again installing a custom rom?
Click to expand...
Click to collapse
Trying this now
Hazou said:
Can u make a logcat about it?
Click to expand...
Click to collapse
Will try the above then if it doesn't work I'll log it :good:
So I tried RSD lite with Android 4.1.2 Blur_Version.91.2.26001.XT890.Retail.en.EU
No dice. Failed at 7/16 System_Signed
This royally put me in a bad place. 45 minutes of ADB later, I'm back on my CWM backup of 404.
Gonna clean the logs and start from scratch
Flacid Monkey said:
So I tried RSD lite with Android 4.1.2 Blur_Version.91.2.26001.XT890.Retail.en.EU
No dice. Failed at 7/16 System_Signed
This royally put me in a bad place. 45 minutes of ADB later, I'm back on my CWM backup of 404.
Gonna clean the logs and start from scratch
Click to expand...
Click to collapse
I have the same problem and I am on Stock 4.1.2. I have given up and no longer have a rooted phone with a custom ROM. I would, however, be grateful if someone could find a solution
If you are on 404 and trying to get to 4.1.2 you can root your phone then use the following method to unroot and install 4.1.2. You can then root again if you wish.
http://forum.xda-developers.com/showthread.php?t=2398347
grampsharry said:
I have the same problem and I am on Stock 4.1.2. I have given up and no longer have a rooted phone with a custom ROM. I would, however, be grateful if someone could find a solution
If you are on 404 and trying to get to 4.1.2 you can root your phone then use the following method to unroot and install 4.1.2. You can then root again if you wish.
http://forum.xda-developers.com/showthread.php?t=2398347
Click to expand...
Click to collapse
Thank you will give that a go.
I've got a problem now after trying the official 4.1.2 upgrade which failed miserably, the boot image has changed to the warning unlocked phone bla bla bla
My SMS centre number keeps disappearing stopping texts sending. Receiving and calling work fine. Tried the fixes online but all work for two minutes then it disappears again.
Can't factory reset, just boots back up with everything as it was when it turned off. Can't get into the stock recovery so stuck with CWM or twrp
Any time I flash a rom it boot loops.
Ideas on how I can get a clean official 4.1.2 onto the phone? Re-lock bootloader, remove root and then try?
So locking bootloader and removing root does not work.
I'd advise anyone that doesn't know what they're doing to avoid it.
It pretty much soft bricked my phone.
I've started a new thread in q&a with another issue regarding multi flash in fastboot hanging on the third or fourth download.
Im certain parts of the 4.1 are still there even after formatting everything in cwm and restoring my original backup.
Having network issues, 3g and wifi etc are fine. Sms, calls and anything to do with changing network operator just stops a few minutes after boot. I can still receive fine which is odd.
What's the deal with putting a radio on over an official ROM? Yey or ney
Sent from my XT890 using XDA Premium 4 mobile app

Categories

Resources