[Q] Galaxy note. stuck on boot screen. not rooted - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Sorry if there is a thread about this already.
My girlfriends galaxy note started to do a software update and went to reboot and it gets stuck on the boot up screen. (With the writing)
The phone isn't rooted but is there anyway to get the phone working without doing a factory restore and wiping the data?
Thank you.

Related

Requesting help with Galaxy Ace S5830D stuck at boot screen

Hi,
Okay so I have a Galaxy Ace S5830. It was rooted etc with no problems. I was just running the stock ROM (Koodo) that it came with.
Earlier I took a backup with CWM, then I used ODIN to flash a different ROM that I got from a different thread. However this ROM was not working well for me, the network connection kept winking in and out, so I wanted to go back to my stock ROM.
I got the stock firmware from SamFirmware using my model + country. I then used ODIN to flash the stock ROM.
When I boot after doing this, I go into a bootloop between the Koodo splash screen and the glowing SAMSUNG logo.
To hopefully remedy this, I used CWM to restore the backup I had taken previously.
However, when I boot after doing this, there is no loop, the phone simply sits at a screen with a black background that says Samsung GALAXY Ace GT-S5830D in white lettering. I have left it for a substantial amount of time and nothing changes.
I have read some other threads and they all suggest re-flashing stock rom with ODIN which I have done to the same result. So at this point the firmware will not fully boot, whether or not I have restored the backup.
Any help in fixing this will be appreciated! I'm stuck and I don't know what to do at this point, other than try some other firmwares.
Thanks!
Update:
Thanks to ver3go I was able to get back to stock rom + factory settings. the bootloop issue has been resolved.
HOWEVER,
when I load from the backup I made with CWM, it freezes forever at the black + white samsung galaxy ace screen.
Any solutions would be great. Though it's not a huge issue, it would be nice to not have to re-install all my apps and reconfigure my phone
frozenreddy said:
Update:
Thanks to ver3go I was able to get back to stock rom + factory settings. the bootloop issue has been resolved.
HOWEVER,
when I load from the backup I made with CWM, it freezes forever at the black + white samsung galaxy ace screen.
Any solutions would be great. Though it's not a huge issue, it would be nice to not have to re-install all my apps and reconfigure my phone
Click to expand...
Click to collapse
Before restoring your back up, do 3 the wipes and then restore your backup

[Q] I think I bricked my Note

Hello, I'm new here, so I don't know if I posted this in the right forum, but I have a big problem. So today I rooted my GT-N7000 and everything was fine, but then I replaced the digital clock with the digital clock of the Galaxy S4 (I found the apk here: http://forum.xda-developers.com/showthread.php?t=2208158) but something must have gone wrong because when I rebooted my Phone, I wasn't able to enter my PIN-Code, because my screen didn't respond anymore. Then I rebooted my Phone and it got stuck at the "Samsung" Screen. Every time I now reboot my phone it gets stuck there. When I rooted my Phone I did it by installing PhilZ 4.93.6 signed Kernel through stock recovery. So I went into recovery mode and did a factory reset. Then I rebooted my Phone and went trough the set up manager, but when I wanted to finish the set up manager my Phone shut down and restarted, then it got stuck on the Samsung Screen again.
Before rooting my phone was on stock ROM XXLT4.
Is there anything I can do to fix my Phone? Please, I need your help :/
Also: sorry for mistakes in my Post, but I'm from germany
You could install the rom again using odin. This will overwrite any bad flashed flashed during mod installation.
nokiamodeln91 said:
You could install the rom again using odin. This will overwrite any bad flashed flashed during mod installation.
Click to expand...
Click to collapse
Thanks for the advise It worked!

[Q] Galaxy s5 stuck on black screen (HELP)

Hello! I am posting this because I have searched for hours on how to fix the phone with no luck, so this is a last resort. Im using a AT&T (sadly) galaxy s5. I was going to update to lollipop but couldn't since my device was rooted. I tried to unroot it by using supersu, but pulled the battery because it was taking forever (I know I know.) The phone at first booted to safestrap and I tried to factory reset to take off the root. Now, whenever I turn on my phone, it wold be at the samsung galaxy s5 screen with the little unlocked symbol. I tried to flash the stock firmware with odin. Didnt work. Now it boots (still says unlocked) and when the samsung animation finishes, it stays on a black screen. Any help at all? Thanks!
Try flashing the kernel from the root page

Samsung Galaxy S6 AT&T is stuck at Samsung logo on boot up

I recently decided to root my Samsung Galaxy S6 (G920AUCS4CPG1) using this method: ww.android.gs/root-att-galaxy-s6/ And my phone ended up getting stuck at the Samsung logo. I am able to get into recovery mode and I tired wiping the cache partition and factory resting but it still gets stuck on the boot screen. I searched the internet for hours for a stock firmware i could re-flash and just be done with it but could not find one. At this point I don't even care about root. I just want the phone up and running. As a sidenote i'm pretty sure what i flashed was a android 5.1.1 frimware, whereas I was on 6.0.1

Rooted Note stuck on boot screen, after factory reset[emoji848][emoji848]

I hope someone can help me.
I have an old galaxy note GT-N7000 which I still use and it’s rooted. Recently it has been giving me issues so I decided to do a factory reset which I thought would just fix everything. However, it just got stuck on the Samsung Galaxy note screen. It also only boots into download mode, not recovery mode & I have tried all the tricks and still it will not boot to the home screen.
I have downloaded a stock N7000 stock rom to flash back to stock, the Jodin program, including the pit file, but as soon as it connects and tells me to press start, all it says is running but does nothing. It will not allow me to flash anything.
Any idea why it’s stuck on the boot screen and how can I fix this? Should I have wiped something before doing a factory reset, as I don’t have a clue. Also if it’s best that I put a latest rom on it, I’ll be cool with it, as long as I can get it working again
Cheers for any help guys...
Thanks
Sent from my iPhone using Tapatalk

Categories

Resources