I tried to install the custom rom "AndroidParanoid"
with Rom Stock 4.1.2 XXLQE
and meanwhile the install its wrote: Installation Aborted
why ?
i really want this rom , its the perfect rom for me !
ReaLioR said:
I tried to install the custom rom "AndroidParanoid"
with Rom Stock 4.1.2 XXLQE
and meanwhile the install its wrote: Installation Aborted
why ?
i really want this rom , its the perfect rom for me !
Click to expand...
Click to collapse
Have you rooted your phone? Also you need custom recovery such as cwm to flash paranoid.
Here is the guide for rooting and installing temporary cwm on your phone.
Hope this helps.
arffrhn said:
Have you rooted your phone? Also you need custom recovery such as cwm to flash paranoid.
Here is the guide for rooting and installing temporary cwm on your phone.
Hope this helps.
Click to expand...
Click to collapse
Yes my phone is rooted
and i used CWM ...
Hmm this is PA 3.60. That issue is known and this rom is still not for daily use man. If you want something 4.2.2 go look for pac-man or cm10.1. If you still want PA, you can check out pa 2.99 thread.
arffrhn said:
Hmm this is PA 3.60. That issue is known and this rom is still not for daily use man. If you want something 4.2.2 go look for pac-man or cm10.1. If you still want PA, you can check out pa 2.99 thread.
Click to expand...
Click to collapse
oh i didnt saw this thread :silly:
thank you very much !
PROBLEM SOLVED
arffrhn said:
Hmm this is PA 3.60. That issue is known and this rom is still not for daily use man. If you want something 4.2.2 go look for pac-man or cm10.1. If you still want PA, you can check out pa 2.99 thread.
Click to expand...
Click to collapse
sorry on the double post
but , how can i put the Nexus buttons in PA ?
this is only for PA 3.60 ? or its works on 2.99 too ?
i dont have problem to install 3.60 , because i really want this nexus buttons
ReaLioR said:
sorry on the double post
but , how can i put the Nexus buttons in PA ?
this is only for PA 3.60 ? or its works on 2.99 too ?
i dont have problem to install 3.60 , because i really want this nexus buttons
Click to expand...
Click to collapse
About that, I can't help you cause I've never tried PA. Maybe someone else can answer this for you.
Related
http://forum.xda-developers.com/showthread.php?t=1330150
Here, I found an amazing app which copy the PIE control.
Here is a video about this: http://www.youtube.com/watch?v=xvGiOQAMI3o
So, is there any developer here, who could port it for our little Mini? :fingers-crossed:
Instead of starting new thread you should've look around first, as it's already proved to be working... I'm using it right now...
Right. I wanted it faster than google could find for me. sorry.
Where the link for SGM?
abieofficial said:
Where the link for SGM?
Click to expand...
Click to collapse
Here you go:
http://forum.xda-developers.com/showthread.php?t=2131339
Enjoy
Press thanks if i helped you.
DeathMetal King said:
Here you go:
http://forum.xda-developers.com/showthread.php?t=2131339
Enjoy
Press thanks if i helped you.
Click to expand...
Click to collapse
Thank you sir
I'll try to flash to Chocobread. Are is will work?
Sorry my bad english
abieofficial said:
Thank you sir
I'll try to flash to Chocobread. Are is will work?
Sorry my bad english
Click to expand...
Click to collapse
Choco bread is an old ROM, im not sure it will work on that, but it will definitely work on newer ROMS , even CM10 and 10.1
BTW why chocobread? There are so many other better ROMS. If you go to android development section you will find many better ROMs than chocobread. Hell, even cm10.1 works properly now (android development>>Bazinga ROM by The Alchemist)
DeathMetal King said:
Choco bread is an old ROM, im not sure it will work on that, but it will definitely work on newer ROMS , even CM10 and 10.1
BTW why chocobread? There are so many other better ROMS. If you go to android development section you will find many better ROMs than chocobread. Hell, even cm10.1 works properly now (android development>>Bazinga ROM by The Alchemist)
Click to expand...
Click to collapse
But, I don't know why I more like use gingerbread based rom. Because I'm afraid my mini get wrong when I not use gingerbread based rom. My mini vibrator and jack headset phone going wrong
I had use CM10.1 By Rohan in the past. My phone get wrong. I dunno what wrong with my flashing, but I believe I flashing the rom correctly...
abieofficial said:
But, I don't know why I more like use gingerbread based rom. Because I'm afraid my mini get wrong when I not use gingerbread based rom. My mini vibrator and jack headset phone going wrong
I had use CM10.1 By Rohan in the past. My phone get wrong. I dunno what wrong with my flashing, but I believe I flashing the rom correctly...
Click to expand...
Click to collapse
I'm sorry to hear that. If your phone is still under warranty, flash stock ROM and take it to SSC. (Actually even if it not under warranty, take it to SSC to determine the cause of your problems- it could be hardware related...for all you know, you could have purchased a defective model)
As for the correct method to flash a ROM-
1) Boot into Recovery.
2) Wipe data, Cache partiton.
3) Go to advanced>>wipe Dalvik cache
4) Install update from sd card>>choose update>>ROM.zip
5) After flash wipe data and cache partition.
6) Reboot.
That's all.
Hope this helped. Best of luck in fixing your phone:fingers-crossed::fingers-crossed:
hi guys im just new here and also new when it comes to rooting, i am done rooting my phone and now im up to installing a new custom rom but i dont know how to start , i do really need a guide because im really afraid of my phone being bricked. the cynagenmod10 or paranoid android is my choice of custom rom..can someone help me please. thanks a lot
iSpLak said:
hi guys im just new here and also new when it comes to rooting, i am done rooting my phone and now im up to installing a new custom rom but i dont know how to start , i do really need a guide because im really afraid of my phone being bricked. the cynagenmod10 or paranoid android is my choice of custom rom..can someone help me please. thanks a lot
Click to expand...
Click to collapse
Hi buddy you can try different custom roms for SSG3 mini one of them is Maclaw's CM10.1 you can check out the Dmod Rom too it's on version 6 by now, there are also pacman and AOKP custom roms as well as enox and benz rom, there are some other more roms but these are the most used by people around, (there isn't a paranoid rom until I know and unfortunately there isn't a MIUI rom either ) i'm personally using carmor rom that is based on Dmod rom v6 good luck trying out pal
SoulReaver19 said:
Hi buddy you can try different custom roms for SSG3 mini one of them is Maclaw's CM10.1 you can check out the Dmod Rom too it's on version 6 by now, there are also pacman and AOKP custom roms as well as enox and benz rom, there are some other more roms but these are the most used by people around, (there isn't a paranoid rom until I know and unfortunately there isn't a MIUI rom either ) i'm personally using carmor rom that is based on Dmod rom v6 good luck trying out pal
Click to expand...
Click to collapse
i really like to try the CM10.1 or AOKP but the problem is i dont know how to after i root what should i do? thanks
iSpLak said:
i really like to try the CM10.1 or AOKP but the problem is i dont know how to after i root what should i do? thanks
Click to expand...
Click to collapse
Install a custom recovery, easiest way to install is by downloading goo.im (TWRP) or rom manager (CWM), just choose either one
then you can flash custom packages in recovery, and you might also want to flash the 3 button mod to enter recovery
AssToast said:
Install a custom recovery, easiest way to install is by downloading goo.im (TWRP) or rom manager (CWM), just choose either one
then you can flash custom packages in recovery, and you might also want to flash the 3 button mod to enter recovery
Click to expand...
Click to collapse
already done installing a new custom rom i tried the [ROM][AROMA][DEODEX]DMod v6 its cool.. thanks all
CM10.1 and AOKP are very good but lacking the ability to record videos.. Dmod is my favourite stock based ROM but they're all worth trying.
My first custom ROM on this phone was benzrom, no problems there.
PAC ROM and paranoid android were a bit slow for my liking. Perhaps they're not as suited to this phones speed.
I'm currently using AOKP by maclaw studio and it is my favourite as its very smooth and light, and has good customization.
Sent from my GT-I8190 using Tapatalk 2
I haven't tried AOKP yet, how about recording videos on that rom? Is worth trying?
Sent from my GT-I8190L using xda app-developers app
SoulReaver19 said:
I haven't tried AOKP yet, how about recording videos on that rom? Is worth trying?
Sent from my GT-I8190L using xda app-developers app
Click to expand...
Click to collapse
Video recording currently only working on Oliver's CM10.1, Maclaw is going to port it to their CM10.1, and maybe AOKP later
recently uninstalled the dmodv6 because it makess my phone laggy.. it dont run smooth , dont know why..installed the cm10.1 by oliver its smooth and fast but the problem is everytime i plug the charge it automatically turns on, is there any solution with that? also is there a way to change the menubackground? its always black -_-.
Hello all,
i have the samsung i9070 and i want a new custom rom on it.
For long battery life and clean rom without any **** on it and it must be fast with no lagg or anything and everything must work 100%
anyway can help me out?
Greets
yasje said:
Hello all,
i have the samsung i9070 and i want a new custom rom on it.
For long battery life and clean rom without any **** on it and it must be fast with no lagg or anything and everything must work 100%
anyway can help me out?
Greets
Click to expand...
Click to collapse
Some music wish alongside all that wishes?
Use CM10.1. I am using it for some time.
I will try OmniRom soon.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Some music wish alongside all that wishes?
Use CM10.1. I am using it for some time.
I will try OmniRom soon.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
ok cool, but what is omni?
and isnt it tha tthe 10.1 version has some bugs and 10.0 is 100% perfect?
I won´t recommend CM10.1 and/or CM10.2 because they are not fully working.
I´ve used both of them in the last months and they have some bugs, for example, GPS works very bad for me.
I´m also thinking about changing my rom and kernel mostly because of the GPS issue.
Anyone to recommend?
LightJB or HarshJelly?
BachuArg said:
I won´t recommend CM10.1 and/or CM10.2 because they are not fully working.
I´ve used both of them in the last months and they have some bugs, for example, GPS works very bad for me.
I´m also thinking about changing my rom and kernel mostly because of the GPS issue.
Anyone to recommend?
LightJB or HarshJelly?
Click to expand...
Click to collapse
Can you help me where to download cwm 10.0?
and how to 2.3.6 to cwm 10.0?
yasje said:
Can you help me where to download cwm 10.0?
and how to 2.3.6 to cwm 10.0?
Click to expand...
Click to collapse
You will need to upgrade to 4.1.2 JB. Look for guides on our phone section. It is past midnight here, I am waking up early. So search, оr I will post tomorrow. You will find out sure.
Sent from my GT-I9070 using Tapatalk
shut_down said:
You will need to upgrade to 4.1.2 JB. Look for guides on our phone section. It is past midnight here, I am waking up early. So search, оr I will post tomorrow. You will find out sure.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
is it possible to from: 2.3.6 rooted gb to 4.1 jb?
ye post it for me if you want, i go to bed
yasje said:
is it possible to from: 2.3.6 rooted gb to 4.1 jb?
ye post it for me if you want, i go to bed
Click to expand...
Click to collapse
Yes.
For the questions you are asking, I think it´s the first time you´ll be doing this.
So first of all I recommend you to get into the developers section and read carefully all the procedure of how to flash, root and other things. If you try doing things without reading before, you might brick your phone.
@yasje
You can fin some informations here:
[INDEX/GUIDE][JB][i9070/9070P] Everything related to JB can be found here!
[{INDEX of GUIDES/TUTORIALS}] Galaxy S Advance [GT-I9070]
yasje said:
is it possible to from: 2.3.6 rooted gb to 4.1 jb?
ye post it for me if you want, i go to bed
Click to expand...
Click to collapse
Like @BachuArg said, read first - then try.
Be carefull, do not install I9070P JB on I9070 phone and I9070 firmware on I9070P phone. That will cause hard brick!!!
And do not use Hong Kong firmware, it will be stuck on that firmware.
So.
step 1. update rooted 2.3.6 to official jb?
step 2. download custom rom.
step 3 flash
step 4 wipe data/ blablalba
step 5 tada done
am i right? ^^
yasje said:
So.
step 1. update rooted 2.3.6 to official jb?
step 2. download custom rom.
step 3 flash
step 4 wipe data/ blablalba
step 5 tada done
am i right? ^^
Click to expand...
Click to collapse
Nope.
You must ROOT you new firmware JB, then flash custom hernel (Cocore) and only after these steps you can continue with step 2, 3 blablabla. :highfive:
Follow this guide and all will be fine: [GUIDE] From stock GB to Custom JB (Noob-friendly)
ok i gonna do it now!
hotfile isnt working nayway more , where do i download stock jb?
nevermind already got it.
where can i download cm 10.0?
yasje said:
nevermind already got it.
where can i download cm 10.0?
Click to expand...
Click to collapse
CM10.0 is older, and do not have camera and OMX fixed as I remember. Use 10.1.
shut_down said:
CM10.0 is older, and do not have camera and OMX fixed as I remember. Use 10.1.
Click to expand...
Click to collapse
i tought the 10.1 was bugged also?
i just want a 100% working clean and fast.
so sitll 10.1? where to download? and which kernel?
yasje said:
i tought the 10.1 was bugged also?
i just want a 100% working clean and fast.
so sitll 10.1? where to download? and which kernel?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=47566901&highlight=d-h+st#post47566901
No need to change kernel. But it has red border sometime, it is explained how to remove it - read couple of posts later.
P.S. We all want 100% working clean and fast ROM. But we do not have sources to make it 100%. You can try it, and if you do not like it - you can go back to stock.
Explore, read, learn, try... That is what is Android about.
red border ok?
and camera wifi direct and other stuff does working normally? and the rom isnt laggy or slow at all?
nvm i used cocor kernel 8.2 smooth and fast as hell
only i doubt choosing a rom: omni rom or harsjelly?
guys i am sick and tired of samsung jb 4.1.2 ddulp8..my dialer app lags(takes 6 seconds to load up sometimes) this is annoying..messaging/contacts app lags..and my whole phone freezes sometimes..wifi doesnt connect, keeps on getting obtaining ip address and this is a bug in samsung 4.1.2 firmwares as i confirmed it on youtube..i didnt have these issues in gingerbread..this stock JB rom eats so much RAM and it sucks..if was afraid of rooting my phone but no more..can someone suggest a better FIRMWARE ?? please help me out here..thanks
heartbrake said:
guys i am sick and tired of samsung jb 4.1.2 ddulp8..my dialer app lags(takes 6 seconds to load up sometimes) this is annoying..messaging/contacts app lags..and my whole phone freezes sometimes..wifi doesnt connect, keeps on getting obtaining ip address and this is a bug in samsung 4.1.2 firmwares as i confirmed it on youtube..i didnt have these issues in gingerbread..this stock JB rom eats so much RAM and it sucks..if was afraid of rooting my phone but no more..can someone suggest a better FIRMWARE ?? please help me out here..thanks
Click to expand...
Click to collapse
Look for cm10.1, you can install it from stock recovery and no need to root before.
Sent from my GT-I9070 using Tapatalk
heartbrake said:
guys i am sick and tired of samsung jb 4.1.2 ddulp8..my dialer app lags(takes 6 seconds to load up sometimes) this is annoying..messaging/contacts app lags..and my whole phone freezes sometimes..wifi doesnt connect, keeps on getting obtaining ip address and this is a bug in samsung 4.1.2 firmwares as i confirmed it on youtube..i didnt have these issues in gingerbread..this stock JB rom eats so much RAM and it sucks..if was afraid of rooting my phone but no more..can someone suggest a better FIRMWARE ?? please help me out here..thanks
Click to expand...
Click to collapse
try the cm10.2 or cm10.1 by team canjica.
they are super fast..
you can find more info on how to install it in the rom thread..
good luck..
dagger said:
try the cm10.2 or cm10.1 by team canjica.
they are super fast..
you can find more info on how to install it in the rom thread..
good luck..
Click to expand...
Click to collapse
thanks..should i install 10.1 or 10.2 ? i am confused..which one has few bugs and do i need specific stock rom version or any stock rom would work..i have 4.1.2 ddulp8
heartbrake said:
thanks..should i install 10.1 or 10.2 ? i am confused..which one has few bugs and do i need specific stock rom version or any stock rom would work..i have 4.1.2 ddulp8
Click to expand...
Click to collapse
try the latest version of cm10.1..
it's a bit better..
http://forum.xda-developers.com/showthread.php?p=47566901&highlight=d-h+st#post47566901
This is link for latest. You will need to change some thing in build.prop to make red border dissapear. Some red border show up sometimes.
Solution: http://forum.xda-developers.com/showthread.php?p=48460020&highlight=red+border#post48460020
shut_down said:
http://forum.xda-developers.com/showthread.php?p=47566901&highlight=d-h+st#post47566901
This is link for latest. You will need to change some thing in build.prop to make red border dissapear. Some red border show up sometimes.
Solution: http://forum.xda-developers.com/showthread.php?p=48460020&highlight=red+border#post48460020
Click to expand...
Click to collapse
thanks man..but it is written beta in 10.1 and in 10.2 team canjica it is written as stable..sorry for all these questions, i am new to this..can u also paste the link for google apps latest version that is compatible with these roms..thanks again
heartbrake said:
thanks man..but it is written beta in 10.1 and in 10.2 team canjica it is written as stable..sorry for all these questions, i am new to this..
Click to expand...
Click to collapse
Threads are not updated.
I use 10.1 for some time, I think it is fastest ROM we have. I am not sure if WIFI direct is working, but I am not using it anyway.
shut_down said:
Threads are not updated.
I use 10.1 for some time, I think it is fastest ROM we have. I am not sure if WIFI direct is working, but I am not using it anyway.
Click to expand...
Click to collapse
okay ..can u please post the google apps link..that is compatible with this rom..
heartbrake said:
okay ..can u please post the google apps link..that is compatible with this rom..
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23060877490000128
http://goo.im/gapps/gapps-jb-20130812-signed.zip
Both links are for same gapps. I posted in case if some do not work.
CM 10.2 is better than 10.1. Don't try Omni.
jihaad said:
CM 10.2 is better than 10.1. Don't try Omni.
Click to expand...
Click to collapse
thanks man..i am using cm 10.1 currently and no lag.. i love it..if u say so, i will try cm10.2 ..this is the link for the latest version right? http://goo.im/devs/diegoch/janice/cm-10.2/cm-10.2-20131025-UNOFFICIAL-janice.zip
heartbrake said:
thanks man..i am using cm 10.1 currently and no lag.. i love it..if u say so, i will try cm10.2 ..this is the link for the latest version right? http://goo.im/devs/diegoch/janice/cm-10.2/cm-10.2-20131025-UNOFFICIAL-janice.zip
Click to expand...
Click to collapse
No, it's old. Latest version: http://d-h.st/UVl
jihaad said:
No, it's old. Latest version: http://d-h.st/UVl
Click to expand...
Click to collapse
I had ear phone problem with cm 10.1. On incoming calls earphn volume was very low nd I had to increase it every tym manually. Is it rectified in cm 10.2?
Sent from my GT-I9070 using xda app-developers app
I installed 10.1
much better then Samsung 4.1.2
mannulko said:
I had ear phone problem with cm 10.1. On incoming calls earphn volume was very low nd I had to increase it every tym manually. Is it rectified in cm 10.2?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
This issue has already been fixed in latest cm10.1 and cm 10.2 if flashed over ddulp8 indian stock rom.
so which rom has the more fixes cm10.1 or 10.2?
Fixes like nfc/omx/RIL/wifi/blutooth
Hello.
I want install the lollipop rom to my phone,but i can't :s
Somebody use this rom on this phone?
Only this ROm is available for Janice: [ROM] CyanogenMod 12.1 [18/07/15]
Read carefully all about that.
Good luck
R_a_z_v_a_n said:
Only this ROm is available for Janice: [ROM] CyanogenMod 12.1 [18/07/15]
Read carefully all about that.
Good luck
Click to expand...
Click to collapse
There is also http://forum.xda-developers.com/galaxy-s-advance/development/rom-omni-rom-t3139661 . People replied that works
Force said:
There is also http://forum.xda-developers.com/galaxy-s-advance/development/rom-omni-rom-t3139661 . People replied that works
Click to expand...
Click to collapse
Thank you,i now try to install this rom !
I installed both of the roms,but I have a problem. I installed some gapps,but not working.
I want to install some app and I recieve the -504 error. I did all and not working. Tipps?:/
I think you should wait for more stable build
Use this )
http://forum.xda-developers.com/galaxy-s-advance/development/rom-ressurection-remix-v5-5-4-t3190104
It works perfect,
You should be on 4.1.2 Official JB for this .