'Yello, everyone. I'm having quite a perplexing issue with my phone. I've got Younggunn's AOKP installed, and have had it for about a week (awesome work, btw) Anyway, either yesterday or the day before (too blinded by anger to give a crap), I was chasing my friend's mom's dog around the neighborhood because it had escaped. Damn mutt. My phone popped out of my pocket, landed on the street, and the digitizer/glass screen got cracked (my LCD is fine, and all touch commands work). However, since the digitizer got cracked, my apps seem to want to FC on me. Every app I've opened/installed since the screen crack has FCed 3 or 4 times, then act normally afterwards. But when I reboot, same thing. All my apps FC a few times, then work normally. I wouldn't think that a cracked screen would have ANYTHING to do with FC issues, but this is the first time I've ever experienced a cracked screen. I've tried fixing permissions, wiping cache/dalvik, factory reset, and full (clean, not dirty ) ROM install. So, I turn to you awesome guys for help, because I'm just so freaking puzzled.
TL;DR - Chasing a dog, phone fell out of pocket onto street. Cracked screen, and since then all apps FC 3 or 4 times before acting normally. Rebooting causes same thing. I've wiped both caches, done a factory reset, and a clean ROM install. Along with fixing permissions. I was NOT having this problem before the screen broke.
Thanks for the help guys!
PS: I looked for threads on this issue. I found many about FC problems, many about cracked screens, but none about the latter causing the former.
The newer builds have been having force close issues. I highly doubt it has anything to do with the screen.
Sent from my PACMAN MATRIX HD MAXX
TenguSnake said:
'Yello, everyone. I'm having quite a perplexing issue with my phone. I've got Younggunn's AOKP installed, and have had it for about a week (awesome work, btw) Anyway, either yesterday or the day before (too blinded by anger to give a crap), I was chasing my friend's mom's dog around the neighborhood because it had escaped. Damn mutt. My phone popped out of my pocket, landed on the street, and the digitizer/glass screen got cracked (my LCD is fine, and all touch commands work). However, since the digitizer got cracked, my apps seem to want to FC on me. Every app I've opened/installed since the screen crack has FCed 3 or 4 times, then act normally afterwards. But when I reboot, same thing. All my apps FC a few times, then work normally. I wouldn't think that a cracked screen would have ANYTHING to do with FC issues, but this is the first time I've ever experienced a cracked screen. I've tried fixing permissions, wiping cache/dalvik, factory reset, and full (clean, not dirty ) ROM install. So, I turn to you awesome guys for help, because I'm just so freaking puzzled.
TL;DR - Chasing a dog, phone fell out of pocket onto street. Cracked screen, and since then all apps FC 3 or 4 times before acting normally. Rebooting causes same thing. I've wiped both caches, done a factory reset, and a clean ROM install. Along with fixing permissions. I was NOT having this problem before the screen broke.
Thanks for the help guys!
PS: I looked for threads on this issue. I found many about FC problems, many about cracked screens, but none about the latter causing the former.
Click to expand...
Click to collapse
Try the xperiamod... It doesn't have any FC issues, you can figure out what the problem is, the ROM or screen... Try V3
Sent from my MB886 using xda app-developers app
That's what I thought at first. But I've been running Younggunn's AOKP build for a solid week now, and I haven't had a single FC until after the break. So a good 5-6 days with no issues. The first FC I got was about 5 or so minutes after the break.
deeje00 said:
The newer builds have been having force close issues. I highly doubt it has anything to do with the screen.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
That's about the only thing I haven't done is try a different ROM. Thanks for the suggestion, I'll try it now.
This is why I love XDA. You posted before I even sent my reply to deeje00
Aingaran said:
Try the xperiamod... It doesn't have any FC issues, you can figure out what the problem is, the ROM or screen... Try V3
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
TenguSnake said:
That's about the only thing I haven't done is try a different ROM. Thanks for the suggestion, I'll try it now.
This is why I love XDA. You posted before I even sent my reply to deeje00
Click to expand...
Click to collapse
XDA is a family where everyone is willing to help others.... we will definitely get a solution for all our problems, how much ever small or how much ever big...
Flash the newest build of aokp its running smooth. Or if you want to try xperiamod that's fine as well.
Sent from my mb886 using Tapatalk 4 Beta
i have the same problem
if you got a fix.... please tell me :laugh:
After all that time I finally managed to fix it. Many thanks thrown @Youngunn2008 and @Aingaran for their suggestions of switching ROMs. which fixed the issue. Now I've got experience replacing a broken screen myself. Thanks again, you guys rock.
So the screen wasn't causing it. Like I said lol.
Sent from my PACMAN MATRIX HD MAXX
TenguSnake said:
After all that time I finally managed to fix it. Many thanks thrown @Youngunn2008 and @Aingaran for their suggestions of switching ROMs. which fixed the issue. Now I've got experience replacing a broken screen myself. Thanks again, you guys rock.
Click to expand...
Click to collapse
even i need a screen, how much does it cost and where did you buy it?
Related
On Monday, i finally got my nook. However, after flashing CM 7.0.2, I have had terrible screen glitches i.e when i have my hands completely off the screen buttons will continue to get pushed. I have tried to reflash, but I am a newbie so my method of flashing might be wrong.
Thanks for the help!
if it persists after an initial reboot, you probably need to recalibrate the touch screen.
BTW, if you're having the screen bug out on you while plugged in, that's normal.
Anyway, sorry i don't have the link handy, but you can do a search for a touchscreen recalibration app. If you really can't find it after searching, PM me and i'll send you a link to a dropbox with the apk
It's a hardware issue. I had the same issue on my Nook color for a while. At first I thought it was software related due to CM7, but the issue persists even on stock and other roms. I actually exchanges my nook at best buy last night for a new one, and no longer have the issue at all.
djlim4 said:
if it persists after an initial reboot, you probably need to recalibrate the touch screen.
BTW, if you're having the screen bug out on you while plugged in, that's normal.
Anyway, sorry i don't have the link handy, but you can do a search for a touchscreen recalibration app. If you really can't find it after searching, PM me and i'll send you a link to a dropbox with the apk
Click to expand...
Click to collapse
Thanks, I tried that but unfortunately, it didn't work.
indagroove said:
It's a hardware issue. I had the same issue on my Nook color for a while. At first I thought it was software related due to CM7, but the issue persists even on stock and other roms. I actually exchanges my nook at best buy last night for a new one, and no longer have the issue at all.
Click to expand...
Click to collapse
Yeah I went back to stock and screen issues persist. Going to exchange it right now, hopefully get a working one this time. haha
I think it is a hardware issue... kinda.
Are you noticing any SD card problems too? I noticed some when my screen was glitching like this. It would show the sd card icon at the bottom (when I didn't have one inserted) saying "SD card corrupt need to reformat."
I bought mine on Sunday and it had the 1.1.0 OS on it. I was already noticing that it was difficult to "unlock" the slide bar because it wouldn't always follow my finger correctly... I think it's a bug in the 1.1.0 software that was factory installed. 1.2 seems to fix that.
For me I fixed it by replacing the 1.0.1 OS, then factory resetting it doing power+N twice (then N two more times), then upgraded to 1.2 using B&N's software.
Then, I formatted /system and /data and flashed phiremod 6.1
It's great now. Now problems at all. You'll still see the "Read forever" message at the beginning but that's ok.
Been using it for two hours without glitches... which is about 1.75 hours more than ever before! I will report back if the issues return.
Well got my new nook after exchanging it, works like a beaut.
hope i just didnt jinx myself.... hahaha
Thanks for the help, appreciate it.
When I put a screen protector on mine it fixed that issue.
Sent from my NookColor
actorman46 said:
When I put a screen protector on mine it fixed that issue.
Sent from my NookColor
Click to expand...
Click to collapse
I hate screen protectors.
Sent from my PC36100 using Tapatalk
indagroove said:
I hate screen protectors.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Me too, but let me tell you; it improves the nook color by a rather large margin.
lyam23 said:
Me too, but let me tell you; it improves the nook color by a rather large margin.
Click to expand...
Click to collapse
So did exchanging my nook for one without screen issues.
Sent from my PC36100 using Tapatalk
indagroove said:
So did exchanging my nook for one without screen issues.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
yep, i agree, solved all my problems. haha
Having touch screen issues with my nook, incredibly frustrating. Stock, cm7, phiremod all affected. Going to exchange for a new one today.
Hi,
I'm seriously considering going out and buying this phone but I'm really not sure after seeing all the threads with people saying that they go back to their phone and it's switched off and requires a battery pull.
This seems to be a fairly serious problem but I was just wondering if it is happening to everyone who owns the O2x?
Please let me know if you are unaffected by the problem!
DarthOps said:
Hi,
I'm seriously considering going out and buying this phone but I'm really not sure after seeing all the threads with people saying that they go back to their phone and it's switched off and requires a battery pull.
This seems to be a fairly serious problem but I was just wondering if it is happening to everyone who owns the O2x?
Please let me know if you are unaffected by the problem!
Click to expand...
Click to collapse
Dont do it go for SGS2
Mine is fine! 1 month of use and never crashed.
My phone has been fine not one reboot or freeze, stayed stock rom for first week then rooted and changed roms several times and still no problems, got mine off ebay brand new, can give u the link to the seller if you like
Sent from my LG-P990 using XDA App
I've had mine since March and I have not experienced any freezes or reboots.
It really is a great piece of hardware. I'm not that fond of LGs software, but that can be solved with a custom ROM.
// A
aholstenson said:
I've had mine since March and I have not experienced any freezes or reboots.
It really is a great piece of hardware. I'm not that fond of LGs software, but that can be solved with a custom ROM.
// A
Click to expand...
Click to collapse
Have you done anything (or have any tips) to try and avoid the issues or do you think you're just lucky lol
KeePeeR26 said:
Dont do it go for SGS2
Click to expand...
Click to collapse
Unless you want accurate GPS that is.
Rusty! said:
Unless you want accurate GPS that is.
Click to expand...
Click to collapse
So, how do you get on Rusty, you seem like a very experienced XDA member.. how is the O2X treating you?
i am not the best guy to talk to . i just got the phone used yesterday for very cheap. i figured that if i dont like it, i can sell it for the same money or even make a little more and get the SGS2.
but so far. no crashes/reboots.. been more than 24 hours. using custom rom as well.
i got the phone for 300$. the stickers still on it. i figure if i decide to sell it. i wont lose at all..
so far. i am really loving the phone. i love the UI of LG. but its slow. it laggs. i wonder if there is a custom rom with the LG UI but smooth one.
right now i am on modaco. with 3000 quadrant. if i switch to google launcher. phone is smooth. if i switch to LG one, it laggs a little in the home screen. i tried the Tmobile version 2.3 on my optimus. its super smooth. but i cant make phone calls on it lol.
and i had a screen problem with the cayanogen rom. for some reason my screens dims and go bright on its own.
oh yeah. i also have a screen light leak/bleed. but it doesnt bother me much because the only way i can notice it if the room is dark and i have a black wallpaper.
Mine went slow once on stock, once isn't bad though. The froyo Rom does seem rushed in truth, (I have random battery drains from my Dialer which makes no sense) but I'm sure Gingerbread will have everything sorted.
DarthOps said:
So, how do you get on Rusty, you seem like a very experienced XDA member.. how is the O2X treating you?
Click to expand...
Click to collapse
Pretty well to be honest. I use CM7 nighties (I bought the phone specifically because it was going to be supported by them) so I cannot expect a bug free experience at this early stage.
I am enjoying it though, I came from a Nexus One that had bugger all internal storage and a poor digitizer, so proper multi-touch and 1.5GB spare for apps is fantastic.
The IPS screen is great if you can overlook the associated backlight bleed (it's not just the 2X, look at iOS devices as well, same thing), the GPS chip is excellent, I can get locks in place that my N1 couldn't.
The stock ROM is turd, frankly. It's fast, until you install something, then it becomes unusable for a bit until it's finished with the app... quality coding
fine
i have my lg optimus 2x now for over a month, no problems here.
i stil have the stock rom.
first v10a. no problem
later v10b. no problem
I have had 2 O2x now for litle over a month
one of them has had BSOD and restarts randomly - the other had none, atleast for the first month - but these past days this one has now also rebooted a couple of times.
Both are completely stock - not rooted and not using any custom roms.
Only using a different launcher which do help make the BSOD and Reboots less often.
DarthOps said:
Have you done anything (or have any tips) to try and avoid the issues or do you think you're just lucky lol
Click to expand...
Click to collapse
I haven't done anything special, so I guess I'm just lucky.
KeePeeR26 said:
Dont do it go for SGS2
Click to expand...
Click to collapse
I returned my O2X and did exactly this. SGS2 on the way to my door!
smokie700 said:
I returned my O2X and did exactly this. SGS2 on the way to my door!
Click to expand...
Click to collapse
TRAITOR hehehehe
Look at all the problems they are having aswell over at there forum
No Issues
I have had it since first day it came out. Not one reboot. Other then minor screen bleed love the phone 1,000X better then my Vibrant
Kickasskev said:
TRAITOR hehehehe
Look at all the problems they are having aswell over at there forum
Click to expand...
Click to collapse
I been over there as well. Most of the problems on the SGS 2 are either software or can be solved with apps. My O2X had so many problems that I could never use the phone and wifi at the same time. Bleeding, constant reboots/freezes crashes even with Custom ROMs. Since Im in afghanistan now I need a phone that will work not just when it feels like it. I will say that when the O2X was working it was a sweet phone. I just dont see the same problems with the SGS2 and Samsung tends to be better in the service side instead of LG leaving us pissing in the wind waiting for a "possible update" that might fix things or not.
guess i´m a lucky guy, too!
i have no crashes/reboots and absolutely NO backlight bleeding
Mine is also working properly.
Sent from my LG-P990 using XDA App
I have been noticing a weird thing with my Droid 3. I love the phone. I haven't had any issues. I do get this annoying green screen effect during transitions. It only seems to happen if I have Netflix or Youtube running in the background. I can fix the problem by going into my settings and turning off my screen animations. I am in the process of getting it exchanged. I will let you know if it is just a fluke or maybe a possible issue with the phone software.
Is this happening to anyone out there with a Droid 3?
video coming soon. Still uploading
I have the same problem between screen changes
Sent from my DROID3 using XDA App
My wifes did that too, but she was using just texts. I turned off animations and to save battery, and noticed it hadn't come back yet. Thought maybe I was only one
Edit: she says it still does it...hmmm dunno...hope it gets fixed in next update
Sent from my DROID3 using XDA Premium App
tried to replicate the problem on mine, but didn't have any issues. Hmm.
Green is usually an overlay color when drawing from a framebuffer. This just means something is forcing screen output before the frame is fully drawn. It's an out-of-sync drawing issue somewhere in the software or driver and isn't a hardware problem. I wouldn't worry too much about it unless it happens so often that it annoys you. It's not hurting anything.
I've seen this as well with youtube...I've also seen it show a partial view of my homescreen while transitioning between menus....not a big deal, but hopefully it'll get fixed soon
Sent from my DROID3 using XDA App
Happened to my wifes and my phone today. Kept going to green screen when trying to open the camara app. Had to reboot to make it go away. Im also on my third droid 3 phone. First one scratched the paint finish next to the keyboard when sliding open. The second droid 3 the speaker sounded like it was shorting out when calling or talking to someone.
Sent from my DROID3 using XDA Premium App
I had this problem, it went away after a reboot. Haven't seen it since.
Sent from my DROID3 using XDA App
Have you tried rebooting the phone, instead of getting it replaced? A reboot can work wonders.
"Have you tried turning it off and then on again?" - The IT Crowd
Love that show.
Sent from my DROID3 using XDA App
wife's phone did this while in camera mode. looked lik she was peering into the matrix. rebuffer or not, it's an obvious software glitch. i factory reset her phone so that vzw would log the activation.
640k said:
wife's phone did this while in camera mode. looked lik she was peering into the matrix. rebuffer or not, it's an obvious software glitch. i factory reset her phone so that vzw would log the activation.
Click to expand...
Click to collapse
Yeah, a stuck app that is unable to redraw will do the same thing but instead of a flash it's a permanent green-screen until the app is force closed or the phone is rebooted. I've had the camera do this to me a few times and Motorola has already come forward saying the camera app has problems, including this one, that they're working on.
i could live with an occasional software glitch if everythign wasn't so dammed slow. i've yet to see this phone actually perform a function faster than my D2. the software overhead is unbelievable.
640k said:
i could live with an occasional software glitch if everythign wasn't so dammed slow. i've yet to see this phone actually perform a function faster than my D2. the software overhead is unbelievable.
Click to expand...
Click to collapse
Well we could be in luck, it looks like root on the D3 could very likely happen sometime this week. 2.3.4 has been successfully rooted with the phone already on 2.3.4 and the bootloader still locked. We have P3 all over it now, too.
elkay said:
Well we could be in luck, it looks like root on the D3 could very likely happen sometime this week. 2.3.4 has been successfully rooted with the phone already on 2.3.4 and the bootloader still locked. We have P3 all over it now, too.
Click to expand...
Click to collapse
Link? Where is this?
pplude said:
Link? Where is this?
Click to expand...
Click to collapse
You didn't really have to look far haha.. start at the top of page 3 where it starts to get good.
http://forum.xda-developers.com/showthread.php?t=1193893&page=3
We're also looking into the way they obtained root on the Atrix on 2.3.4 with the bootloader still locked.. second post.
http://forum.xda-developers.com/showthread.php?t=1138204
...thats my post. Wow I feel dumb.
pplude said:
...thats my post. Wow I feel dumb.
Click to expand...
Click to collapse
LOL! I just saw that myself. Cheers!
Ha!
@pplude that made my day.
I have the same problem, i get the screen flicker going between handecent and my homescreen running prolauncher. i've had my droid 3 for a couple weeks and after rooting and freezing all that junk, I'm quite happy with the phone. other than this weird green pixel matrix screen... thing..
Not a huge issue, just a lil annoying.
TopHat
I had the green screen issue. I uninstalled youtube updates and haven't seen it since, same thing on my girls d3 hope it helps
Hi,
1. So i was on xenon HD and started experiencing touch sensitivity issues where in lock screen did not respond or opened up google now instead of unlocking.
2. So I thought of switch over and flashed PAC and was really satisfied as I also got my GPS working. But the very next day it started to behave unusually and the home button of navbar kept on activating all by itself hence taking me out of any app or even app drawer.
Thought of it as ROM issue and decided would flash the latest version sometime later as my net was down.
3. Used liquidsmooth but the same problem of intermittent home button and back button too started and I had to switch off the phone within 5 minutes of flshing liquidsmooth.
4. Finally thought of getting 4.1.2 and hence flashed holoblur. By this time navbar went numb :crying:. Didn't respond to anything.
5. Restored to the stock ROM. But still navbar is not working.
Just hoping that this is not hardware related issue:fingers-crossed:. Would really hate to part away from this phone.
Please help out guys.
EDIT : So the navbar just started responding by itself. But still not perfect. Sometimes it does sometimes it doesn't.
aquaticbullet said:
Hi,
1. So i was on xenon HD and started experiencing touch sensitivity issues where in lock screen did not respond or opened up google now instead of unlocking.
2. So I thought of switch over and flashed PAC and was really satisfied as I also got my GPS working. But the very next day it started to behave unusually and the home button of navbar kept on activating all by itself hence taking me out of any app or even app drawer.
Thought of it as ROM issue and decided would flash the latest version sometime later as my net was down.
3. Used liquidsmooth but the same problem of intermittent home button and back button too started and I had to switch off the phone within 5 minutes of flshing liquidsmooth.
4. Finally thought of getting 4.2.1 and hence flashed holoblur. By this time navbar went numb :crying:. Didn't respond to anything.
5. Restored to the stock ROM. But still navbar is not working.
Just hoping that this is not hardware related issue:fingers-crossed:. Would really hate to part away from this phone.
Please help out guys.
EDIT : So the navbar just started responding by itself. But still not perfect. Sometimes it does sometimes it doesn't.
Click to expand...
Click to collapse
Try using xperiamod and by the way holoblur is 4.1.2 not 4.2.1
Sent from my Atrix HD using Tapatalk 4 Beta
Aingaran said:
Try using xperiamod and by the way holoblur is 4.1.2 not 4.2.1
Sent from my Atrix HD using Tapatalk 4 Beta
Click to expand...
Click to collapse
My bad.
Flashed xperiamod but still same thing.
The phone is really not usable. All the navbar buttons are behaving frantically. I really cant understand what is wrong.
aquaticbullet said:
My bad.
Flashed xperiamod but still same thing.
The phone is really not usable. All the navbar buttons are behaving frantically. I really cant understand what is wrong.
Click to expand...
Click to collapse
may be a hardware error, contact your nearest store to fix it, before that flash stock and flash boot logo too, so untill they check the bootloader, they might not know your bootloader is unlocked...
Aingaran said:
may be a hardware error, contact your nearest store to fix it, before that flash stock and flash boot logo too, so untill they check the bootloader, they might not know your bootloader is unlocked...
Click to expand...
Click to collapse
I am in delhi.
This phone has not been launched in India. Hoping local guys could fix it. Really wont like to pay those leech for some software bug which i can fix up with community's help.
aquaticbullet said:
I am in delhi.
This phone has not been launched in India. Hoping local guys could fix it. Really wont like to pay those leech for some software bug which i can fix up with community's help.
Click to expand...
Click to collapse
Completely flash a stock fast boot. Issue could be kernel related. If the issue persists after a fully wiped stock flash this is a hardware issue. As is, issue sounds more like either bad settings from dirty flashing or kernel issues. The stock ROMs don't come with kernels, if your last 4.2.2 ROM had a bad kernel, same bad kernel is more than likely being used. I recommend flashing Mex Retail.
skeevydude said:
Completely flash a stock fast boot. Issue could be kernel related. If the issue persists after a fully wiped stock flash this is a hardware issue. As is, issue sounds more like either bad settings from dirty flashing or kernel issues. The stock ROMs don't come with kernels, if your last 4.2.2 ROM had a bad kernel, same bad kernel is more than likely being used. I recommend flashing Mex Retail.
Click to expand...
Click to collapse
Holoblur has a clean full working kernal right?
Sent from my Atrix HD using Tapatalk 4 Beta
The navbar works fine sometimes before again going into madmode. So i really doubt it is a hardware issue.
@Aingaran : Holoblur has custom kernel http://forum.xda-developers.com/showpost.php?p=43430196&postcount=131
@skeevydude : I need to follow the instructions mentioned here for stock JB ? http://forum.xda-developers.com/showthread.php?t=2226527 OR simply use myth tools to flash the mexican retail rom zip ?
facepalm: for asking this but is there anything else i need to do ?? )
So flashed the stock but same issue. Now the particular strip of the touchscreen where navbar rests has totally become unresponsive. Hence hardware is at fault here.
So flashed PAC ver 23 and using pie controls as of now as a temporary solution. Would try and get it repaired during weekend. @Aingaran : I guess I need to change screen and digitizer. Since you broke yours can you gimme rough idea how much it will cost ?
Yup.. Its just digitizer LCD panel is fine if you get display... And the kit for replacing digitizer cost me 3770 rs... You can search on ebay.in and don't forget to get T5 screw driver and digitizer sticker to stick digitizer to frame...
Sent from my Atrix HD using Tapatalk 4 Beta
Aingaran said:
Yup.. Its just digitizer LCD panel is fine if you get display... And the kit for replacing digitizer cost me 3770 rs... You can search on ebay.in and don't forget to get T5 screw driver and digitizer sticker to stick digitizer to frame...
Sent from my Atrix HD using Tapatalk 4 Beta
Click to expand...
Click to collapse
Okie. So I am gonna order it soon. Did you get the digitizer replaced by yourself or through a repair shop ?
Asking because here in delhi noone even touches motorola phones for repair sake.
aquaticbullet said:
Okie. So I am gonna order it soon. Did you get the digitizer replaced by yourself or through a repair shop ?
Asking because here in delhi noone even touches motorola phones for repair sake.
Click to expand...
Click to collapse
I did it myself and if u wanna know how.. Just search atrix HD digitizer replacement in YouTube
Aingaran said:
I did it myself and if u wanna know how.. Just search atrix HD digitizer replacement in YouTube
Click to expand...
Click to collapse
So basically I have to get this http://orders.ebay.in/ws/eBayISAPI.dll?ImportHubViewItem&itemid=321142293549
This is inclusive of t5 screw right ??
There is no mention of what I am gonna get in the tool kit. Do I need to order something else ?
@Aingaran please just confirm.
aquaticbullet said:
So basically I have to get this http://orders.ebay.in/ws/eBayISAPI.dll?ImportHubViewItem&itemid=321142293549
This is inclusive of t5 screw right ??
There is no mention of what I am gonna get in the tool kit. Do I need to order something else ?
@Aingaran please just confirm.
Click to expand...
Click to collapse
yes this exactly what you need...
I just rooted my tablet using instructions from several sources here, and have a bit of a problem. I rooted it because of a slightly annoying problem with the touch screen. It worked great 90% of the time, but occasionally I would have to tap an icon a few times for the screen to respond. I have not installed any Rom on it as I decided to keep it stock for the time being. That could change real quick though!! After I rooted it, the problem has increased. I did install several tweaking apps on it (Enterprise ram and digitizer booster, Optimus Root Memory Optimizer, and Entrophy Fixer) and a few games that I had on it before. Removing the digitizer app did no good. The odd thing about it is, I do not notice the touch screen issue if I am playing a game, only when I touch the application icons or links. There does not appear to be any app available to calibrate the screen. Has anybody else had this issue with the 701? Thanks for any help you can provide!!
mikekoz said:
I just rooted my tablet using instructions from several sources here, and have a bit of a problem. I rooted it because of a slightly annoying problem with the touch screen. It worked great 90% of the time, but occasionally I would have to tap an icon a few times for the screen to respond. I have not installed any Rom on it as I decided to keep it stock for the time being. That could change real quick though!! After I rooted it, the problem has increased. I did install several tweaking apps on it (Enterprise ram and digitizer booster, Optimus Root Memory Optimizer, and Entrophy Fixer) and a few games that I had on it before. Removing the digitizer app did no good. The odd thing about it is, I do not notice the touch screen issue if I am playing a game, only when I touch the application icons or links. There does not appear to be any app available to calibrate the screen. Has anybody else had this issue with the 701? Thanks for any help you can provide!!
Click to expand...
Click to collapse
I had the same issue with mine, installing a custom Rom improved things no end
Sent from my K00C using XDA Premium HD app
boldnuts said:
I had the same issue with mine, installing a custom Rom improved things no end
Sent from my K00C using XDA Premium HD app
Click to expand...
Click to collapse
Thank you. That is what I am leaning towards. I am looking at CROMi-X 7.0.3. Which one did you flash?
boldnuts said:
I had the same issue with mine, installing a custom Rom improved things no end
Sent from my K00C using XDA Premium HD app
Click to expand...
Click to collapse
mikekoz said:
Thank you. That is what I am leaning towards. I am looking at CROMi-X 7.0.3. Which one did you flash?
Click to expand...
Click to collapse
Installed the latest version of CROMi, and no luck. The problem remains. Plus I apparently lost root. I will mess with it more tomorrow!
mikekoz said:
Installed the latest version of CROMi, and no luck. The problem remains. Plus I apparently lost root. I will mess with it more tomorrow!
Click to expand...
Click to collapse
i have tried just about all the available Roms for the tf701, currently using the new CM12 which runs very well, make sure you do a full wipe/format before hand though, try this app, also worked for me, the one on the OP page
http://forum.xda-developers.com/showthread.php?t=1261237
Sent from my K00C using XDA Premium HD app
I may end up trying CM12. I am also getting an error at boot up , "the process com.google.process.gapps has stopped" . It does not seem to be causing any problems, but it is annoying nevertheless. Also, this rom is nice, but I see no performance difference between it and stock. I tried that calibration app you linked to, but it does not seem to have done anything. Thanks!
boldnuts said:
i have tried just about all the available Roms for the tf701, currently using the new CM12 which runs very well, make sure you do a full wipe/format before hand though, try this app, also worked for me, the one on the OP page
http://forum.xda-developers.com/showthread.php?t=1261237
Sent from my K00C using XDA Premium HD app
Click to expand...
Click to collapse
Where did you find CM12? I have been searching the web and all I can find is CM11!
mikekoz said:
Where did you find CM12? I have been searching the web and all I can find is CM11!
Click to expand...
Click to collapse
http://forum.xda-developers.com/tra.../cyanogenmod-12-lollipop-pre-nightly-t3003092
Sleeepy2 said:
http://forum.xda-developers.com/tra.../cyanogenmod-12-lollipop-pre-nightly-t3003092
Click to expand...
Click to collapse
I may actually wait on this after reading the blog. Is there anything that is not working on this at this time? I do not have the dock, so the one limitation listed would not affect me. Would the performance of this rom be better than the Cromix I have on it now?
mikekoz said:
I may actually wait on this after reading the blog. Is there anything that is not working on this at this time? I do not have the dock, so the one limitation listed would not affect me. Would the performance of this rom be better than the Cromix I have on it now?
Click to expand...
Click to collapse
I doubt it, but doesn't hurt to try. CM12 is in beta though. CROMi-X 7.1 was just released. The "xxx process has stopped" is a bug that will be ironed out soon. You did clean install the rom, did you?
But if you have the same problem on different roms it's unlikely that your touch problem is software related.
To rule out a software problem you should format data and reflash the rom. Format, not just wipe. Which will delete all data on your tablet.
Also try with the microSD out. Bad cards can cause all kinds of weird problems.
berndblb said:
I doubt it, but doesn't hurt to try. CM12 is in beta though. CROMi-X 7.1 was just released. The "xxx process has stopped" is a bug that will be ironed out soon. You did clean install the rom, did you?
But if you have the same problem on different roms it's unlikely that your touch problem is software related.
To rule out a software problem you should format data and reflash the rom. Format, not just wipe. Which will delete all data on your tablet.
Also try with the microSD out. Bad cards can cause all kinds of weird problems.
Click to expand...
Click to collapse
Thank you for your response. I was able to fix the process error, but I still ended up putting CM12 on it anyhow! It took me all of 10 minutes and I have had no problems so far. It is very smooth and fast. I did a wipe/format, and a dalvik wipe before I put CM12 on it using CM 6.0.5.1 (I think that is the correct version). Not sure I did that correctly though, since my download folder on the tablet was still intact afterwards. My LCD problem is more than likely hardware, but it is more of an annoyance than anything. It only affects opening up apps. The screen works great in games and just typing.