[Q] Wrong CSC in recovery after flashing JB with Odin - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

I have an Italian no brand device (ITV) and i flashed the first JB russian version (SER XXLPY) and i did a wipe data/factory reset.
Then i flashed the other roms without wiping data in this order: (SER XXLPZ) --> (SER XXLQ4) --> (TSR XXLQB) --> (DBT XXLQE) --> (ITV XXLQG)
Now when i enter in the recovery i read:
# MANUAL MODE #
-- Applying Multi-CSC....
Applied the CSC-code : SER
Successfully applied multi-CSC.
I tried to check CSC by dialing *#1234# but it does not work as it returns me an error: Connection problem or invalid MMI code
How can i return to the ITV CSC? Is it possible to do it without wiping data?

Do a factory reset and you'll have the proper CSC.

Related

[How to] Change CSC code for G900H

Please note that I held no responsibility if you damage your phone, brick it or anything! This was made based on my own experience.
Hi, just thought I share my experience in changing CSC code. Initially I purchased my S5 with XSE (Indonesian) CSC code. Not having the patient for lollipop, I flashed Kazakhastan ROM and my CSC code changed to SKZ. After several months, samsung decided to release lollipop for XSE region and I flashed to it but was stuck with XXV (Vietnam). Not sure what happened but it seems that it takes the first code in the multi-CSC rom. Anyway this had me frustrated for a couple of months. So without further ado, here is the steps:
1. Download requirements:
-Download the BOC3 indian ROM: G900HXXU1BOC3_G900HODD1BOC3_G900HXXU1BOAD_HOME.tar.md5 (must be this ROM - this rom allows change CSC code without root)
-Download your country ROM (for my example is G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar.md5)
-Download and install Cygwin - or any app which can modify .tar files, but lets use Cygwin for this case
-Download and install Odin 3.09 or higher (to flash ROMs)
2. Flash the indian ROM (G900HXXU1BOC3_G900HODD1BOC3_G900HXXU1BOAD_HOME.tar.md5) to your device
3. While waiting for the ROM to flash, open your country rom, remove .md5 at the end so the name will be from G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar.md5 to G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar
4. Open the G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar with winzip or winrar, extract cache.img and hidder.img and place in home folder of Cygwin
5. Open cygwin and type the following:
tar -H ustar -cf csc.tar cache.img hidden.img
6. Test the indian rom, open dialer and type *#272*your-imei-number# - a selection of CSC should appear meaning that the ROM can change CSC without root
7. Flash in Odin, put the csc.tar in CSC and flash - this will not trip knox - I have tried this myself
8. Boot your phone, open dialer and type *#272*your-imei-number# - from here more codes should appear including the ones included in the csc.tar file
9. Select your country code (in this case I selected XSE) and it will automatically reboot
10. Shut down and check your CSC in bootloader (hold power + up + home) it should be correct now
11. Flash your country rom, clear cache and everything and voila!
Please also note that this guide should work on other devices as long as the device has a rom with *#272*your-imei-number# enabled without root
Hope this helps!
adit said:
Please note that I held no responsibility if you damage your phone, brick it or anything! This was made based on my own experience.
Hi, just thought I share my experience in changing CSC code. Initially I purchased my S5 with XSE (Indonesian) CSC code. Not having the patient for lollipop, I flashed Kazakhastan ROM and my CSC code changed to SKZ. After several months, samsung decided to release lollipop for XSE region and I flashed to it but was stuck with XXV (Vietnam). Not sure what happened but it seems that it takes the first code in the multi-CSC rom. Anyway this had me frustrated for a couple of months. So without further ado, here is the steps:
1. Download requirements:
-Download the BOC3 indian ROM: G900HXXU1BOC3_G900HODD1BOC3_G900HXXU1BOAD_HOME.tar.md5 (must be this ROM - this rom allows change CSC code without root)
-Download your country ROM (for my example is G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar.md5)
-Download and install Cygwin - or any app which can modify .tar files, but lets use Cygwin for this case
-Download and install Odin 3.09 or higher (to flash ROMs)
2. Flash the indian ROM (G900HXXU1BOC3_G900HODD1BOC3_G900HXXU1BOAD_HOME.tar.md5) to your device
3. While waiting for the ROM to flash, open your country rom, remove .md5 at the end so the name will be from G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar.md5 to G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar
4. Open the G900HXXU1BOD3_G900HOLB1BOD1_G900HXXU1BOCA_HOME.tar with winzip or winrar, extract cache.img and hidder.img and place in home folder of Cygwin
5. Open cygwin and type the following:
tar -H ustar -cf csc.tar cache.img hidden.img
6. Test the indian rom, open dialer and type *#272*your-imei-number# - a selection of CSC should appear meaning that the ROM can change CSC without root
7. Flash in Odin, put the csc.tar in CSC and flash - this will not trip knox - I have tried this myself
8. Boot your phone, open dialer and type *#272*your-imei-number# - from here more codes should appear including the ones included in the csc.tar file
9. Select your country code (in this case I selected XSE) and it will automatically reboot
10. Shut down and check your CSC in bootloader (hold power + up + home) it should be correct now
11. Flash your country rom, clear cache and everything and voila!
Please also note that this guide should work on other devices as long as the device has a rom with *#272*your-imei-number# enabled without root
Hope this helps!
Click to expand...
Click to collapse
will try this gan, not increase knox right?
hope it works.
Terima kasih..
noez92 said:
will try this gan, not increase knox right?
hope it works.
Terima kasih..
Click to expand...
Click to collapse
Knox remains 0x0 gan dijamin aman
adit said:
Knox remains 0x0 gan dijamin aman
Click to expand...
Click to collapse
so frustating to see XXV, festive effect, tiengviet lang :laugh:
---------- Post added at 12:37 AM ---------- Previous post was at 12:34 AM ----------
can you help for process in CYGWIN? because it says no directory
nvm, already do it in another directory.
omg!
i can confirm this method works on my G900H.
Nice job gan.
Thanks banyak...
Need available csc code for sgh-t889 on v4.3
How do i get the available csc code coz someone told me its what cozing my network &b data problems
Which ROM are you on? Does *#272*imei work?
Am on stock rom 4.3 & that code doesnt work on it
AFAIK, the only rom with working CSC change is BOC3 indian ROM: G900HXXU1BOC3_G900HODD1BOC3_G900HXXU1BOAD_HOME.tar .md5
That ROM is for S5 & mine is a Note 2
Please see the title and the forum, this is an S5 forum, better luck looking at note 2 forum.
adit said:
Please see the title and the forum, this is an S5 forum, better luck looking at note 2 forum.
Click to expand...
Click to collapse
Where we get this rom? Can you please give the link??

[P8lite] Name firmware not changed

Hi to all, I have installed ota update C432B183 on C432B171, why the name of the firmware has remained C432B171? How do I change the name of the firmware in C432B183? I know there is a way but I do not know how to do, such as changing the file vendor. Thanks
Factory reset, wipe cache and reboot, if not change, re wipe and reflash your desire firmware.
The most easy way is if you have twrp, with format system, no balong bug.
if the update is a zip do not extract just put it as zip in the sd card in dloaf folder and the software version will change to B183

HWOTA [P9 Lite] upgrade, rebrand without tools pc

##########################
##=for p9 lite all emui 5 android 7 HWOTA=##
=================================
# Just device ready installed custom recovery twrp.
# check data , use twrp
# Wipe, advanced, check data..if data f2fs recommended change file system ext4 default partition , mybe not issued after custom rom
# Back to f2fs data to ext4 ?!
Select Wipe, advanced,select data, change file system ext4, then go back Manu, reboot recovery again.
if ur device is running official firmware, or root only, just wipe /dalvik-cache.
####working#####
# Upgrade firmware is not approved..
# Restore firmware version officials after custom rom..
# bootloop ur device..
============================
### rebrand ###
change vendor country n firmware..
if use rebrand, after bootloader loader locked, u need to unlock again. N then use hwota_update n firmware ur device
=============================
## if issues bootloop in logo!!! Direct hold volume up n power together, wipe cache partition n wipe data factory reset.
# Links all firmware ..http://pro-teammt.ru/firmware-database/?firmware_model=Vns&firmware_page=0
# Or download firmware finder play store
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
###### how to upgrade:
Download HWOTA-VNS.zip, move to sdcard, extract with name.
Download manual firmware full ota mf
update.zip
update_data_full_public.zip
update_full_hw_xxxx.zip
u just rename update_full_hw_xxxx.zip
to update_all_hw.zip
example: update_full_VNS-L31_hw_spcseas.zip
rename to update_all_hw.zip
move 3 zip firmware to sdcard/HWOTA-VNS/ put folder upgrade
## Utube guide..
Links HWOTA-VNS: https://mega.nz/#!oDwTCCoA!HHtaNCbexXVADT_6ugbb1HA9WIMFjwXPmji6VoMQYVo
==============================
syaif fabian said:
### for p9 lite all emui 5 android 7 HWOTA
==========================
# Just device ready installed custom recovery twrp.
# check data , use twrp
# Wipe, advanced, check data..if data f2fs recommended change file system ext4 default partition , mybe not issued after custom rom
# Back to f2fs data to ext4 ?!
Wipe, format, type yes n then go back Manu, reboot recovery..
Wipe again, check data, change file system ext4.
===========================
####working#####
# Upgrade firmware is not approved..
# Restore firmware version officials after custom rom..
# bootloop ur device..
============================
### rebrand ###
change vendor country n firmware..
if use rebrand, after boot loader locked, u need to unlock again. N then use hwota_update n firmware ur device
=============================
# Links all firmware firmware..http://pro-teammt.ru/firmware-database/?firmware_model=Vns&firmware_page=0
# Or download firmware finder play store
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
###### how to upgrade:
u just rename update_full_hw_xxxx.zip
to update_all_hw.zip
example: update_full_VNS-L31_hw_spcseas.zip
rename to update_all_hw.zip
move 3 zip to folder upgrade
## Utube guide..
Links HWOTA-VNS: https://mega.nz/#!oDwTCCoA!HHtaNCbexXVADT_6ugbb1HA9WIMFjwXPmji6VoMQYVo
==============================
Click to expand...
Click to collapse
Mr., have you seen this? ))
https://forum.xda-developers.com/huawei-p9lite/development/hwota-huawei-p9-lite-t3777440
Yes...good
@bozka1
these 2 guides aren't the same...
this is for MemoryCard
with different files.
@syaif fabian
Thanks a lot!
It works very good!
I uploaded my L21C432 with B394 version to B398 (Google Patch April 2018)
It works perfectly
https://forum.xda-developers.com/huawei-p9lite/development/hwota-huawei-p9-lite-t3777
syaif fabian said:
##########################
##=for p9 lite all emui 5 android 7 HWOTA=##
=================================
# Just device ready installed custom recovery twrp.
# check data , use twrp
# Wipe, advanced, check data..if data f2fs recommended change file system ext4 default partition , mybe not issued after custom rom
# Back to f2fs data to ext4 ?!
Wipe, format data, type yes n then go back Manu, reboot recovery..
Wipe again, advance, check data, change file system ext4. N wipe all partition.
But if ur device is running official firmware, or root only, just wipe /dalvik-cache.
####working#####
# Upgrade firmware is not approved..
# Restore firmware version officials after custom rom..
# bootloop ur device..
============================
### rebrand ###
change vendor country n firmware..
if use rebrand, after boot loader locked, u need to unlock again. N then use hwota_update n firmware ur device
=============================
## if issues bootloop in logo!!! Direct hold volume up n power together, wipe cache partition n wipe data factory reset.
# Links all firmware ..http://pro-teammt.ru/firmware-database/?firmware_model=Vns&firmware_page=0
# Or download firmware finder play store
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
###### how to upgrade:
Download HWOTA-VNS.zip, move to sdcard, extract with name.
Download manual firmware full ota mf
update.zip
update_data_full_public.zip
update_full_hw_xxxx.zip
u just rename update_full_hw_xxxx.zip
to update_all_hw.zip
example: update_full_VNS-L31_hw_spcseas.zip
rename to update_all_hw.zip
move 3 zip firmware to sdcard/HWOTA-VNS/ put folder upgrade
## Utube guide..
Links HWOTA-VNS: https://mega.nz/#!oDwTCCoA!HHtaNCbexXVADT_6ugbb1HA9WIMFjwXPmji6VoMQYVo
==============================
Click to expand...
Click to collapse
Hello
I managed to do the update, but the mobile phone was factory reset
Is it possible to update without factory reset?
thank you
sfft said:
Hello
I managed to do the update, but the mobile phone was factory reset
Is it possible to update without factory reset?
thank you
Click to expand...
Click to collapse
No
sfft said:
Hello
I managed to do the update, but the mobile phone was factory reset
Is it possible to update without factory reset?
thank you
Click to expand...
Click to collapse
Not problem..but, u mobile no bootloop .
But is bootloop factory reset
good guide :highfive:
I am currently on EMUI 4 and Android 6 and I cant upgrade with this method, I always end up in TWRP again with some errors.
Also, How do I rebrand with this method? Step by step guide please
Thanx
ancillarysword said:
I am currently on EMUI 4 and Android 6 and I cant upgrade with this method, I always end up in TWRP again with some errors.
Also, How do I rebrand with this method? Step by step guide please
Thanx
Click to expand...
Click to collapse
@syaif fabian
Hi, direct to the point ..
Can i debrand directly ex. from L31C02B345 to L31C432B370 / B371 without having to go back to MM ??
Is the same method indicated in your last post?
If so, where do I find L31C432 SS / DS oeminfo_bin.zip to flash?
Thank you for your time...
Edit: Inside the HWOTA.zip file I downloaded there is a TWRP recovery.
Should that be used or can i use the official one / Meticulus / EliteTWRP ones too ?
Thanks again for you time.
Regards

Galaxy J7 Prime SM-G610M - G610M/DS - Android 7 Nougat Stock ☆ TTT - SPL 2018-06-01 ☆

Download the firmware for the Galaxy J7 Prime SM-G610M with product code TTT from Trinidad and Tobago. This firmware has version number PDA G610MUBS1BRF3 and CSC G610MUUB1BRD1. The operating system of this firmware is Android 7.0 , with build date Thu, 14 Jun 2018 23:11:07 +0000. Security patch date is 2018-06-01, with changelist 12546423.
- Model ... SM-G610M
- Model name ... Galaxy J7 Prime
- Country ... Trinidad and Tobago
- Version ... Android 7.0
- Changelist ... 12546423
- Build date ... Thu, 14 Jun 2018 23:11:07 +0000
- Security Patch Level ... 2018-06-01
- Product code ... TTT
- PDA ... G610MUBS1BRF3
- CSC ... G610MUUB1BRD1
Download Firmware ... Sammobile
https://www.sammobile.com/firmwares/galaxy-j7-prime/SM-G610M/TTT/download/G610MUBS1BRF3/225631/
Download Firmware ... Mediafire
https://www.mediafire.com/file/muav9i3bb2o5003/Android_7_Nougat_Stock_J7_Prime_SM-G610M-DS_%255BTTT_-_B1%255D_%255B21-07-2018%255D_By_JHAM2005.rar/file
Download ... Odin
https://www.mediafire.com/file/b31gmzgmx9hn4l8/Odin3-v3.13.1.zip/file
Download ... Samsung USB Driver
https://www.mediafire.com/file/ge9eff95t3dbda0/Samsung_USB_Driver_for_Mobile_Phones_1.5.51.0.exe/file
Installation Instructions
1.- Download Odin 3.13.1 + Samsung USB Driver
2.- Extract the firmware file you just downloaded. You should get 5 files:
- AP (System &Recovery)
- BL (Bootloader)
- CP (Modem / Radio)
- CSC_*** (Country / Region / Operator)
- HOME_CSC_*** (Country / Region / Operator)
3.- Add each file to it's respective field in Odin v3.13.1. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
4.- Reboot your phone in Download / Odin mode with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
- Option 2 VOLUME DOWN + VOLUME UP than USB cable
- Option 3 POWER + VOLUME DOWN + VOLUME UP
- Option 4 POWER + VOLUME DOWN + HOME BUTTON
5.- Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
6.- Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
7.- Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
How to Root J7 Prime * G610M - G610M/DS * Android 7 Nougat Stock
NOTE:
1.- IT IS NECESSARY TO GO TO: Settings -> Developer Options -> OEM unlocking AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
2.- KNOX will be tripped once you flashed custom binaries to your phone.
3.- Samsung Firmware System Updates will no longer work once you flashed custom binaries.
How to Install
1.- Install the Stock Firmware with Odin
2.- Install TWRP
3.- It is necessary to have the files to release the memory and the root file in the Pendrive (USB) to use them by OTG
4.- Enter the advanced recovery and install the ... zip ... no-verity-opt-encrypt.zip ... need a OTG adapter + USB Pendrive
5.- Go back and give ... Then Format Data ... YES ...
6.- Restart the mobile
7.- Configure the mobile to suit the user
8.- Turn off the mobile and enter the Recovery
9.- Install the root zip to use ... SuperSU or Magisk
Restart the mobile
Enjoy :fingers-crossed:
MOUNT INTERNAL STORAGE
- To mount internal storage you need to remove forced encryption by flashing this zip in TWRP
no-verity-opt-encrypt.zip
- Then you may need to format/data to boot properly.
Download ... Recovery (TWRP)
https://www.mediafire.com/file/elwuin9e8jnca2a/TWRP-3.2.1-For-Galaxy-J7-Prime.tar/file
Download ... no-verity-opt-encrypt
https://www.mediafire.com/file/6e6ger5w5i5w1bl/no-verity-opt-encrypt-6.0.zip/file
Download ... SuperSU
https://www.mediafire.com/file/ukltn1drrf1lj1b/SuperSU-v2.82-201705271822.zip/file
Download ... Magisk
https://www.mediafire.com/file/16m3m8bqdtc3v9a/Magisk_-_Root_%2526_Universal_Systemless_Interface_16.7.rar/file
I have same CSC: BRD1 but firmware is from other country, security patch: 01/abril.
Do you think that can I install TWRP and root it using these files with no need to flash the firmware TTT?
EDIT. It´s done, it worked for me Odin v.3.12.5 and flashed No-verity and Magisk via ADB sideload
SubwayChamp said:
I have same CSC: BRD1 but firmware is from other country, security patch: 01/abril.
Do you think that can I install TWRP and root it using these files with no need to flash the firmware TTT?
EDIT. It´s done, it worked for me Odin v.3.12.5 and flashed No-verity and Magisk via ADB sideload
Click to expand...
Click to collapse
You can use the files without any problem, they still work in a previous version
JHAM2005 said:
You can use the files without any problem, they still work in a previous version
Click to expand...
Click to collapse
Thanks for this, I will look around for a good custom rom based on TouchWiz, if you know someone and flashing No-verity and formatting data TWRP still not recognicing ext. sdcard.
Twrp para J7 Prime G610M atualizado ?
israel dos santos said:
Twrp para J7 Prime G610M atualizado ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...recovery-twrp-3-2-0-galaxy-j7-prime-t3716355/
Here is it, install the 3.2.3 version. But please, speak in english here,it is against the rules to use another language as only a small number of people will understand and be able to help.
Is the bootloader necessary?
AeonGV_ said:
https://forum.xda-developers.com/ga...recovery-twrp-3-2-0-galaxy-j7-prime-t3716355/
Here is it, install the 3.2.3 version. But please, speak in english here,it is against the rules to use another language as only a small number of people will understand and be able to help.
Click to expand...
Click to collapse
Is the bootloader necessary?
Heeelp me please !! =D
SubwayChamp said:
I have same CSC: BRD1 but firmware is from other country, security patch: 01/abril.
Do you think that can I install TWRP and root it using these files with no need to flash the firmware TTT?
EDIT. It´s done, it worked for me Odin v.3.12.5 and flashed No-verity and Magisk via ADB sideload
Click to expand...
Click to collapse
I know this post is old but I am having some troubles with my j7 prime g610m. I think the solution is about this "No-verity". Let me explain : I have installed Oreo ROM, Binary 7 some days ago. Then, installed TWRP but this one never shows my internal storage files. It shows "0mb" when I select storage button. I have already done the "format data", change file system, which I've seen on others websites and tutorials. But reading this post I've found something new for me. This file "no-verity" is the solution? I have to flash it, right? To solve this problem... My question is : HOW DO I FLASH IT if my TWRP shows nothing of my files. I read you flashed it via ADB Sideload. Could you please teach me how to it? I'll thank you so much! :fingers-crossed:
jpdobler7 said:
I know this post is old but I am having some troubles with my j7 prime g610m. I think the solution is about this "No-verity". Let me explain : I have installed Oreo ROM, Binary 7 some days ago. Then, installed TWRP but this one never shows my internal storage files. It shows "0mb" when I select storage button. I have already done the "format data", change file system, which I've seen on others websites and tutorials. But reading this post I've found something new for me. This file "no-verity" is the solution? I have to flash it, right? To solve this problem... My question is : HOW DO I FLASH IT if my TWRP shows nothing of my files. I read you flashed it via ADB Sideload. Could you please teach me how to it? I'll thank you so much! :fingers-crossed:
Click to expand...
Click to collapse
Sorry for delay, it's really a very old post that I don't remember exactly the issue with TWRP.
Install this universal ADB drivers onto your Windows PC https://adb.clockworkmod.com/ then connect your device power on to the PC, and see if it's properly recogniced typing
Code:
adb devices
if yes then you can continue, type:
Code:
adb reboot recovery
to reboot to TWRP, then place the zip that you want to flash onto your device either DM verity or Magisk in the same folder where ADB was installed, usually on your main drive (this just to avoid paths input) go to Advanced settings in TWRP and search for ADB Sideload feature, swipe from your device to start it and in your ADB/fastboot terminal type:
Code:
adb sideload name-of-your-file.zip
to sideload it to your device and it's all. (replace name-of-your-file.zip with the name of the file that you'll go to flash keeping the .zip extension)
nao pegou SM (610M)DS

Pdp error

While i wipe cache in recovery mode i receive first this error E:[PDP] lstat /c____/pdp_b__ : 0 - No PDP scenario , and after that it says wipe cache completed. Somebody know what is all about ? i was searching over all internet and nothing found. Also shows this error in wipe data factory reset. Thanks.
i have the same error after updating to android 10. my phone seems to be working fine, but im pretty sue this is not normal. i hvae galaxy a7 2018

Categories

Resources