Cm10.1 codename lungo wifi issues - Sony Xperia T, TL, TX, V

Hi,
I have problems with WIFI in my Xperia T wit CM10.1 CODENAME LUNGO. The first time the WIFI worked fine but now I can't active it, the button keep grey showing "activating" message but don't work...
I tried to flash several times the rom but don't work.
Any solution??
(thanks in advance)

Reflash the kernel and/or furnish the Wi-Fi modules from Doom kernel
Sent whilst sat on the toilet.

Related

Wifi problem FIXED

Ok.. so i thought this was weird.
i was having wifi problem. not being able to get connected or even see the networks on my phone.
CM6.1 and superhybrid 2.11 does not have problem its just when you flash a theme or kernel it start causing problem (FOR ME IN MY CASE, i dont know about you), and wifi eventually stops working.
currently i am running lastest radio korean version.
Whenever i flash a wild monk or other kernels on CM6.1 wifi stops working
When i flashed the stock theme that was provided on the op from superhybrid 2.1.1 the wifi stopped working.
i just thought it was weird and wanted to know if any of you guys are experiencing same problem as me.
Let me know Thanks!
I've tried a few WildMonks on CM 6.1 nightlies, and don't have any wifi problems...
Sent from my Nexus One using XDA App
which version are u using.
CM 250 nightly, and I think the WildMonks is:
2.6.35.8_AVS-925mV-CM_CFS_20101116_2329.zip
Its listed as #154 in the About Phone info (don't know why they never make the file name the same as the version info)
Sent from my Nexus One using XDA App
I always flashed wildmonk's kernel right after i flashed CM6.1 nightlies, and my wifi is always wonky (i get a lot of errors enabling wifi and wifi tethering).
Next time I do a full wipe, i wont apply the kernel and see if that happens

WiFi and GPS not working

WiFi and GPS are not Woking after flashed tsunami x 3.0 (4.1.2) and I have try to reflash GB and ICS but still it is not working ............when I switch on WiFi and GPS the icons also not working for me...........plz solve this problem for meeeeeee........:crying::crying:
Aj rocker said:
WiFi and GPS are not Woking after flashed tsunami x 3.0 (4.1.2) and I have try to reflash GB and ICS but still it is not working ............when I switch on WiFi and GPS the icons also not working for me...........plz solve this problem for meeeeeee........:crying::crying:
Click to expand...
Click to collapse
Did you try to flash a 3 way gingerbread rom with Odin and repartition?
Throwing out of the window from my flying Ferrari killer S3 driven by a proud omega team member
nothing happen bosssss
Boss 3 ways means gb = phone,CSC,PDA,repartion.........I tried and I also tried the WiFi fix flash,GPS fix flash bossssss but nothing happened......u just guide me to solveeeeeerr this problem bossssss....I am waiting for uuuuu to solve my WiFi and gps problems.............(bossss can u give me a backup of working WiFi,gps,etc....4.1.2 ROM for galaxy s gt-i9000)....
problem wifi and gps
Boss 3 ways means gb = phone,CSC,PDA,repartion.........I tried and I also tried the WiFi fix flash,GPS fix flash bossssss but nothing happened......u just guide me to solveeeeeerr this problem bossssss....I am waiting for uuuuu to solve my WiFi and gps problems.............(bossss can u give me a backup of working WiFi,gps,etc....4.1.2 ROM for galaxy s gt-i9000)....

[Q] Bluetooth Bootloop?

I currently have Youngunns AOKP rom installed on my phone which works great.
However I have tried to flash 3 other Roms after clearing Dalvik, Cache and User Data and whenever I use bluetooth and it connects to my car it freezes and then crashes to the Moto unlocked bootloader message and stays there.
The only way to get it to reboot is by holding down the Power & Volume buttons.
Then once the Rom boots up it freezes up and does the same exact thing even if I have the bluetooth off.
Any Ideas what can be causing this as it has done it on Pacman, the other AOKP Rom and Liquid Rom too.
Thanks in advance
Happened to me too with aokp. I haven't found a custom ROM yet that has all I need, so back to stock I went.
Sent from my MB886 using xda app-developers app
I'm on younguns 6/24 AOKP and it does not have the Bluetooth problem.
I'm thinking since I tried the latest versions of the above mentioned roms that maybe they were all built from the same source, thus having the same problem with Bluetooth.
Anyone else running into this problem?
sent from my Atrix HD MAXX
Alright so I just installed the latest liquid ROM v 2.9 and it did the same thing with the BT.
However when I flashed v 2.8. Bluetooth seems to work fine with no bootloop.
So it seems that the latest liquid, PAC, and non-youngunns AOKP all have the same problem.
I hope they fix it in later updates
sent from my Atrix HD MAXX

[q] cm 10.2 wi-fi doesn't work

Hi, I am using a CM 10.2 based rom and I am having several problems. My wifi doesn't work, even after a clean flash. Is there a fix for that, what should I do ?
Is this issue only with cm10.2? Try other rom and check whether problem persists
Sent from my AweSoMe ?♥Note2♥?
mannyvinny said:
Is this issue only with cm10.2? Try other rom and check whether problem persists
Sent from my AweSoMe ?♥Note2♥?
Click to expand...
Click to collapse
Hello. I flashed the stock jb xxlsz and the issue still continues can this be a hardware issue?
please help - Galaxy Note N7000 almost dead
mannyvinny said:
Is this issue only with cm10.2? Try other rom and check whether problem persists
Sent from my AweSoMe ��♥Note2♥��
Click to expand...
Click to collapse
Hello,
I'm a newbie on rom flashing etc...
and recently I tried to update my Galaxy Note N7000 using this ROM : cm-10.2-20131108-NIGHTLY-n7000
and the wifi started to get crazy.
I experienced connexion issue.
WIFI was disconnected sudently, then I tried to revert to Stable version of Cyanogen mod 10.1
but wifi was off.
I tried to flash using different stock rom :
N7000XXLT9_N7000XXLT3_N7000OXXLT3
N7000XXLTA_N7000XXLT4_N7000VD2LT4
N7000XXLSZ_N7000XEFLS4_XEF
N7000XXLC1_N7000OXALC1_OXA
N7000XXLRI_N7000XEFLP2_XEF
and sometimes I don't knwo why or how the wifi cams back (not always even installing the same stock rom), but with connexion issues.
using this sequence I can get wifi connexion sometimes...
install :
1 - N7000XXLSZ_N7000XEFLS4_XEF
2 - philz kernel LSZ
3 - N7000XXLTA_N7000XXLT4_N7000VD2LT4
4 - Philz Kernel LTA
5 - XEU-N7000XXLT9-20130611091825
5 - Philz Kernel LT9
6 - Rom Radio XXLSC
7 - Kernel : speedmod-kernel-n7000-jb-k5-5-CWM
sometimes the wifi is not recognized, and the mac address is empty.
I'm bit lost, and I would like to know how to revert to a stable situation.
maybe this is due to the kernel.
I'm using Philz kernels aligned with the rom.
Hello,
back after many hours spent yesterday evening playing with different ROMs, Kernels.
in fact I'm currently using my phone as a tablet, without SIM card in it.
and it seems mandatory at least once to put a valid sim card in it.
I tried to put a valid SIM card with 3G data connexion,
no issue with the wifi during 3hours.
shutdown thephone
then remove the SIM and power on the Phone
miracle the phone connect on the wifi without issue!
so it is good to know that SAMSUNG Galaxy note requires at least once to connect on mobile data network.

[Q]ROM with fully working 2g network (=no signal lost)

Premise : as I said in the title,I'm not asking 'what is the best rom ?'.
Now,here's my problem and my question :
Since a month I have 2g connecyion problems (YES,I use 2g connection and I switch to 3g only when I need a data connection;I save more battery and my phone can last 30-40 hours from 100 to 15%),very often my phone loose the signal and it won't turn back until I reboot.
I read in the forum that is a cm bug and in some vanir rom the problem is fixed.
Here's what i did trying to fix the problem :
-restore stock firmware through kdz file (v20a)
-root/recovery and unsecure boot flash.
-flash cm 10.1.3 and iodak kernel (clean instal) -> still 2g problem.
-flash vanir stable 4.3.1 with stock or werewolf kernel (clean install) -> 2g problem and sometimes when I lost the signal the phone gets hot and my battery drains really fast. I have also another problem : my phone was at 90%,i turned it off and in the morning the battery was at 0%.
-flash zaiben rom with iodak kernel(really old version that worked correctly in the past)-> wifi problems after some reboots.
-flashed miui 3.12.6 from miuiandroid with optimus prime kernel -> 2g problems.
I don't know what to do,can someone suggest me a stable rom without network problems (wifi/2g,3g/gps/nfc) and maybe with good performance and battery life ?
Yesterday I flashed 4 different rom (always with a clean install) and I'm tired to try different rom so please,don't answer me 'make backup and try this or that rom' and share your experience instead.
Thanks in advice.
stock rom, or any custom 4.2.2+ rom with EPRJ RIL implemented, which you can do yourself. look for my tutorial in general subforum, replacing CM RIL with EPRJ RIL gives rock-stable connection
I already looked your tutorial and the official thread of the tool but afterinstalling java,net framework etc,the tool doesn't work.
It says 'java not recognised' or something similar.
And what about kernels ? Does they (or some of them) create some kind of problems ?
So,if I'll make the tool works and I'll replace the ril,can I use cm 10.1.3 with iodak 8.0 kernel without problems ?
The strange thing is that network worked correctly with cm 10.1.3 for months,but now it doesn't.
BTW,wich rom are you using ? Can it fit for my phone use ?
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
moss20 said:
I already looked your tutorial and the official thread of the tool but afterinstalling java,net framework etc,the tool doesn't work.
It says 'java not recognised' or something similar.
And what about kernels ? Does they (or some of them) create some kind of problems ?
So,if I'll make the tool works and I'll replace the ril,can I use cm 10.1.3 with iodak 8.0 kernel without problems ?
The strange thing is that network worked correctly with cm 10.1.3 for months,but now it doesn't.
BTW,wich rom are you using ? Can it fit for my phone use ?
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
Click to expand...
Click to collapse
you gotta edit some settings on your computer, if you have issues with java. check out the link in the tutorial to the program i used to extract .jar file, it has the proper troubleshooting ^^
kernels shouldn't have issue with 2g/3g, but i do know some custom kernels have issues with wifi on stock and stock-based rom that appear randomly, and just as randomly go away (wifi stuck on turning on)
and yeah, you should be able to use iodak+cm combination without the issue. and it is strange that the problem just now started appearing, but hey, if this works, you got yourself set for future
atm i'm back on modified stock with iodakv7, i needed proper mhl support. i've however used i think all the roms for our device atleast for a week or so. carbon, slim, omni, vanir, cm, aokp, pac, mokee...
Ok,I'll try to fix java problems and I'll se what happens and I'll report here
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)
moss20 said:
Premise : as I said in the title,I'm not asking 'what is the best rom ?'.
Now,here's my problem and my question :
Since a month I have 2g connecyion problems (YES,I use 2g connection and I switch to 3g only when I need a data connection;I save more battery and my phone can last 30-40 hours from 100 to 15%),very often my phone loose the signal and it won't turn back until I reboot.
I read in the forum that is a cm bug and in some vanir rom the problem is fixed.
Here's what i did trying to fix the problem :
-restore stock firmware through kdz file (v20a)
-root/recovery and unsecure boot flash.
-flash cm 10.1.3 and iodak kernel (clean instal) -> still 2g problem.
-flash vanir stable 4.3.1 with stock or werewolf kernel (clean install) -> 2g problem and sometimes when I lost the signal the phone gets hot and my battery drains really fast. I have also another problem : my phone was at 90%,i turned it off and in the morning the battery was at 0%.
-flash zaiben rom with iodak kernel(really old version that worked correctly in the past)-> wifi problems after some reboots.
-flashed miui 3.12.6 from miuiandroid with optimus prime kernel -> 2g problems.
I don't know what to do,can someone suggest me a stable rom without network problems (wifi/2g,3g/gps/nfc) and maybe with good performance and battery life ?
Yesterday I flashed 4 different rom (always with a clean install) and I'm tired to try different rom so please,don't answer me 'make backup and try this or that rom' and share your experience instead.
Thanks in advice.
Click to expand...
Click to collapse
Don't use unsecure boot flash' it is.unnecessary
Try optimus play kernel, it is excellent for me (wifi, 3g always on, whole day of battery and more)
Sent from my LG-P880 using Tapatalk
now I'm on miui 3.12.6 with optimus prime kernel and I edited the RIL using flyingbear's tutorial but it's too early to say if it works but first impression seems good.
I'm too busy to check another rom (i'd like to use vanir 4.3.1 or cm 10.1.3) and other kernel but when I'll try it,I'll write my impression
I have similar problem with network on latest miui.When i restart device or just turn it on/off i can find network untill i go to airplane network and switch it off again then everything is fine.Also it happened just 1 time that i lost my network while my phonewas on.I did discovered that this is MiUi problem since i never got this kind of behavior on any previous rom.Last couple of days even fter restart my network is ok no need to use airplane trick anymore.So again i will say this is miui bugg for somereason.
Sent from my LG 4X HD refrigerator.
Trust me,it's a month that I "fight" with mobile network,it's a common problem for all non-stock based roms,sometimes happens and sometimes not.
However you can fix it with flyingbear's tutorial.
MEDIACOM SmartPad 810c
ROM : First 4.3 (4.0.3)

Categories

Resources