Today, I'm porting AOKP Rom from Galaxy S2 to Galaxy Grand Duos, As I don't have the device, I need some testers. :angel:
Im not responsible by any bricks/errors that can happen with your phone, keep that in mind.
To all testers, screenshot the bugs, and tell how and where it happens.
Instructions:
Enter Recovery
Wipe Dalvik Cache
Wipe Data
Install zip from sd card
Select Rom
Wipe dalvik cache
Wipe Data
Install GApps
Send me the result
NOTE THAT THE BASE ROM I USED TO PORT THIS ROM IS CM10.1 PORTED BY PAWTIP, 80% OF THE CREDITS GOES TO HIM.
DOWNLOAD LINK:
v1.00 http://goo.gl/nPBVO
v1.01 http://goo.gl/vuMUc
v1.02 http://goo.gl/twTOK
___________________________
GApps DL: http://goo.gl/dpNNY
mateuswtf said:
Today, I'm porting AOKP Rom from Galaxy S2 to Galaxy Grand Duos, As I don't have the device (it's with my wife and she's traveling) I need some testers, who's up? In 1h~ I'll be finishing it and uploading... :angel:
Click to expand...
Click to collapse
Send me the link
Uploading
Almost done uploading bro!
mateuswtf said:
Almost done uploading bro!
Click to expand...
Click to collapse
downloading..first
btw rom only 160 mb?do i need to flash gapps??
Answer.
Yes, you need to flash GApps.
mateuswtf said:
Yes, you need to flash GApps.
Click to expand...
Click to collapse
installation aborted error 7
jittusm said:
installation aborted error 7
Click to expand...
Click to collapse
Wiped data and dalvik cache?
mateuswtf said:
Wiped data and dalvik cache?
Click to expand...
Click to collapse
ya wiped dalvik and data and factory reset and flashed. got this error. anyone else downloaded and successfuly flashed?
mateuswtf said:
Wiped data and dalvik cache?
Click to expand...
Click to collapse
Rooted phone?
obviously anyideas? whis was the base rom u used?
Answer
jittusm said:
obviously anyideas? whis was the base rom u used?
Click to expand...
Click to collapse
AOKP for s ll i9100. Cause it has the same resolution of our screen.
mateuswtf said:
AOKP for s ll i9100. Cause it has the same resolution of our screen.
Click to expand...
Click to collapse
guys try this out for error 7
http://highonandroid.com/android-roms/how-to-fix-status-7-error-with-cwm-recovery-on-rooted-android/
i deleted the assert prop line and reflashed. still error 7..
jittusm said:
i deleted the assert prop line and reflashed. still error 7..
Click to expand...
Click to collapse
I'll be fixing these bugs tomorrow, i count with you jittusm.
mateuswtf said:
I'll be fixing these bugs tomorrow, i count with you jittusm.
Click to expand...
Click to collapse
ok waiting
jittusm said:
ok waiting
Click to expand...
Click to collapse
Already fixed, and uploaded, check first page and give me feedback.
No one flashed it yet ? Where's my feedback? lol
mateuswtf said:
No one flashed it yet ? Where's my feedback? lol
Click to expand...
Click to collapse
where are gapps download?
ferdie553 said:
where are gapps download?
Click to expand...
Click to collapse
Flashed the rom yet? Try to boot it, I will provide a Gapps download link...
GApps DL in main post
Related
This thread are for those who use aokp ics by erikcas.
Download: http://android.cas-online.nl/downloads/aokp/ics/
Click on this file aokp_tass_milestone-6
How to Flash
Boot to cwm
Wipe data
wipe cache
wipe battery stats(optional not really need)
wipe dalvik cache
format system
flash aokp after its complete
wipe cache
wipe dalvik
fix permissions and reboot
nice..now we can report all aokp ics stuff here :good:
anybody flashed it ? how's it ? any call issues etc ?
still downloading here with 20kbps mobile connection
lockscreen not working..anybody else havin the same problem ?
A_U said:
lockscreen not working..anybody else havin the same problem ?
Click to expand...
Click to collapse
hmm.
Logcat? + screenshot if applicable.
Could be of inconsequent resizing. I had to comment out one section to prevent compile error, not sure if it was lockscreen. But that should not affect its function
darkshadow1997 said:
This thread are for those who use aokp ics by erikcas.
Download: http://android.cas-online.nl/downloads/aokp/ics/
Click on this file aokp_tass_milestone-6
How to Flash
Boot to cwm
Wipe data
wipe cache
wipe battery stats(optional not really need)
wipe dalvik cache
format system
flash cm9 after its complete
wipe cache
wipe dalvik
fix permissions and reboot
Click to expand...
Click to collapse
uhh
erikcas said:
hmm.
Logcat? + screenshot if applicable.
Could be of inconsequent resizing. I had to comment out one section to prevent compile error, not sure if it was lockscreen. But that should not affect its function
Click to expand...
Click to collapse
lockscreen is working but only with gapps.
A_U said:
lockscreen not working..anybody else havin the same problem ?
Click to expand...
Click to collapse
ù
don't set honeycomb lock screen...
L.E.D 26 said:
ù
don't set honeycomb lock screen...
Click to expand...
Click to collapse
yep layout problem..
also headphones not working..audio plays through back speaker even though headset is connected.
A_U said:
yep layout problem..
also headphones not working..audio plays through back speaker even though headset is connected.
Click to expand...
Click to collapse
audiorouting is a known issue
erikcas said:
audiorouting is a known issue
Click to expand...
Click to collapse
oh..well looking forward for fix
Not so smooth too bad
Sent from my GT-S5570 using xda premium
any news about aokp ics
Hello Advancers xD ,
i would ask if can we expect Omni for this i9070 ?
sry for bad eng ,
In TeamCanjica github (here https://github.com/TeamCanjica?tab=repositories ) you can see "omni_framework", "omni_hardware"... So I think we could expect something
Sent from Italy using Tapatalk
Toni5830 said:
In TeamCanjica github (here https://github.com/TeamCanjica?tab=repositories ) you can see "omni_framework", "omni_hardware"... So I think we could expect something
Sent from Italy using Tapatalk
Click to expand...
Click to collapse
i hope
First of all they are working on cm11.... It would take time to have a stable cm11 .... So even if they work on Omni it would be months from now I guess
And btw I don't find anything interesting in Omni... Pac and Pa are better for me:cyclops:
I tried building OmniROM from source but I got too many errors
try this one
http://goo.im/devs/diegoch/janice/omni-4.3
the gapp
the gapp for firmware omni 4.3.1?
N£utrino said:
try this one
http://goo.im/devs/diegoch/janice/omni-4.3
Click to expand...
Click to collapse
angelo62 said:
the gapp for firmware omni 4.3.1?
Click to expand...
Click to collapse
Don't flash anything unless recommended by the devs. it may lead to bricking of your device.
N£utrino said:
try this one
http://goo.im/devs/diegoch/janice/omni-4.3
Click to expand...
Click to collapse
is this work ?
bugs ? ..
iiD4x said:
is this work ?
bugs ? ..
Click to expand...
Click to collapse
if you want to count to three and you install together:laugh:
the download count is 382
zamurai x said:
if you want to count to three and you install together:laugh:
Click to expand...
Click to collapse
Nope.avi xD
DaRkRhiNe said:
the download count is 382
Click to expand...
Click to collapse
LOL ! :laugh:
DaRkRhiNe said:
the download count is 382
Click to expand...
Click to collapse
424:laugh:
stuck at bootanimation
For me its working! Buttery smooth as hell
peejay323 said:
For me its working! Buttery smooth as hell
Click to expand...
Click to collapse
elaborate my friend! thats not proper feedback!
peejay323 said:
For me its working! Buttery smooth as hell
Click to expand...
Click to collapse
You did wipe all (cache, Dalvik cache, factory and system)?
peejay323 said:
For me its working! Buttery smooth as hell
Click to expand...
Click to collapse
Screenshots plz , and video if u can it will be nice , and if u find bugs put it here
iiD4x said:
Screenshots plz , and video if u can it will be nice , and if u find bugs put it here
Click to expand...
Click to collapse
I'm trying it and i have not little problems with root and updating it, the twrp recovery doesn't load and doesn't see the memories.
For the rest for now it's reactive, smooth and strange good battery (is under high use).
Some one can help for the root problem?
it is released
http://forum.xda-developers.com/showthread.php?t=2555445
mobile data report for build 20131208
it has problem about mobile data on i9070dxamd1 Thailand too.
pan.baidu:http://pan.baidu.com/s/1jGE922i pw: snz3 --------← this link will be always update
mega:https://mega.nz/#!iNVUGYKY!w4Q9qgiDjK171jOkE92ziuQ8lik_kEaSR7MVGzMTUF4
pre rooted with recovery zip by @toshin696 :https://mega.nz/#!O8hAjaDQ!VP8I_oj9TLGBRKeYr9adQQ4LgE9tvJCKmJjgts-ebyE
ok
It works c5502?
Thanks, this is also available on xperifirm.
I'm curious as to the root method.
jatyeo said:
Thanks, this is also available on xperifirm.
I'm curious as to the root method.
Click to expand...
Click to collapse
I made a pre rooted whit recovery and works!!!
Thanks man for sharing this!
oscarbt said:
It works c5502?
Click to expand...
Click to collapse
yes
Please upload only 5.1.1 stock kernel
Thanks
Edit: I see kernel build from 10 july, maybe kernel not chang from 5.02 ?
uncomment said:
Please upload only 5.1.1 stock kernel
Thanks
Edit: I see kernel build from 10 july, maybe kernel not chang from 5.02 ?
Click to expand...
Click to collapse
here https://mega.nz/#!aBFW2JqA!zz_EyYPSYshAyHsZE3wEGxMAaiiBIqLu6pcGJ1s4g0Q
English?
The flashable rom is English?
a546109781 said:
here https://mega.nz/#!aBFW2JqA!zz_EyYPSYshAyHsZE3wEGxMAaiiBIqLu6pcGJ1s4g0Q
Click to expand...
Click to collapse
Thank you so much!
TaAaZZ said:
The flashable rom is English?
Click to expand...
Click to collapse
yes you can change to english in setup guide
a546109781 said:
yes you can change to english in setup guide
Click to expand...
Click to collapse
Okay thanks a ton for uploading this.
I am on CyanogenMod 11 (stable) with working recovery, if i wipe all and flash this from cwm will it work?
TaAaZZ said:
Okay thanks a ton for uploading this.
I am on CyanogenMod 11 (stable) with working recovery, if i wipe all and flash this from cwm will it work?
Click to expand...
Click to collapse
of course
a546109781 said:
of course
Click to expand...
Click to collapse
I tied, after wiping everything when I flashed it after saying "Installing files, this may take some time' just after 1 sec it said "Installed successfully" then it said Unpacking superuser and something and then it gave an error.
After trying several times I flashed CM again :/
Does xposed module works?
Sent from my C5503 using Tapatalk
Do I need to format before flashing , like can I uncheck wipe data amd flash the Ftf?
And im using C5502....
Simply amazing, thx.
TaAaZZ said:
I tied, after wiping everything when I flashed it after saying "Installing files, this may take some time' just after 1 sec it said "Installed successfully" then it said Unpacking superuser and something and then it gave an error.
After trying several times I flashed CM again :/
Click to expand...
Click to collapse
if you only neet root on stock 5.1.1 with unlock bl
you can flash the FTF and flash any kernel with recovery
then flash supersu zip and recovery zip
and then flash the ftf again exclude system
humanzqzr said:
Does xposed module works?
Sent from my C5503 using Tapatalk
Click to expand...
Click to collapse
maybe.you can test it..
neildalal said:
Do I need to format before flashing , like can I uncheck wipe data amd flash the Ftf?
And im using C5502....
Click to expand...
Click to collapse
yes
I ported cm12 for our SGM2 but i dont know that it works. test it by yourself and tell me if it works!
Link: http://www.mediafire.com/download/t3355rh7j0jca2q/cm-12.1-20160425-UNOFFICIAL-jena.zip
Gapps: opengapps.org ( pick arm>> android 5.1 >> pico )(51MB I think )
(because the system partition has only 497.19MB i think)
Install method:
download the rom and the gapps.
download and install the v3 stable cwm recovery( credits @simokb1996) Link: http://forum.xda-developers.com/galaxy-mini/mini-2-dev/cwm-6-0-5-1-galaxy-mini-2-s6500-t3201861
put the files into internal or external storage and boot into recovery.
do a nandroid backup!!
wipe data/factory reset
install rom
install gapps
reboot and see if it works
when it isnt working then just write to me: [email protected]
thanks,
Good Luck and looking forward
Nexus 4 ❤
#Malpa73 said:
Good Luck and looking forward
Nexus 4
Click to expand...
Click to collapse
thanks,i made the rom but i can t test it because i am really busy today iwill test it and upload it tomorrow
xEmre66 said:
thanks, i made the rom i'm now testing it it is on cm12 bootanimation i will upload it tomorrow !
Click to expand...
Click to collapse
Ok, I was there the will to refine CM10.1 Improved, mainly kernel And if all goes well this week to hit the XDA
How will the already launched it willingly after testing This is version 5.0 or 5.1.1?
Nexus 4 ❤
#Malpa73 said:
Ok, I was there the will to refine CM10.1 Improved, mainly kernel And if all goes well this week to hit the XDA
How will the already launched it willingly after testing This is version 5.0 or 5.1.1?
Nexus 4
Click to expand...
Click to collapse
It's Android 5.1.1. Yesterday I tried to Boot it Booted up. I tested it and it works but the camera doesn't work.
It's uploading now!!!!!!!! I cant test it because my mini 2 charging port not working......
Test it by yourself and say me thats working or not please. When not working I'm gonna fix it.
xEmre66 said:
It's uploading now!!!!!!!! I cant test it because my mini 2 charging port not working......
Test it by yourself and say me thats working or not please. When not working I'm gonna fix it.
Click to expand...
Click to collapse
I will write the link now when its uploaded on mediafire.
xEmre66 said:
I will write the link now when its uploaded on mediafire.
Click to expand...
Click to collapse
I uploaded it. you can download it
xEmre66 said:
I ported cm12 for our SGM2 but i dont know that it works. test it by yourself and tell me if it works!
Link: http://www.mediafire.com/download/t3355rh7j0jca2q/cm-12.1-20160425-UNOFFICIAL-jena.zip
Gapps: opengapps.org ( pick arm>> android 5.1 >> pico )(51MB I think )
(because the system partition has only 497.19MB i think)
Install method:
download the rom and the gapps.
download and install the v3 stable cwm recovery( credits @simokb1996) Link: http://forum.xda-developers.com/galaxy-mini/mini-2-dev/cwm-6-0-5-1-galaxy-mini-2-s6500-t3201861
put the files into internal or external storage and boot into recovery.
do a nandroid backup!!
wipe data/factory reset
install rom
install gapps
reboot and see if it works
when it isnt working then just write to me: [email protected]
thanks,
Click to expand...
Click to collapse
well this is'nt the right place to upload your thread
you can upload it to the developement thread to fix bugs and errors
simokb1996 said:
well this is'nt the right place to upload your thread
you can upload it to the developement thread to fix bugs and errors
Click to expand...
Click to collapse
+but i cant write there i need higher post count it says when i try that
xEmre66 said:
+but i cant write there i need higher post count it says when i try that
Click to expand...
Click to collapse
ah ok i interstand now
you build contains a lot of errors you just ported from pico
it does'nt build from source and it gave problems in recovery
because the recovery can handle just cm11 but the updater-script in cm12.1 need a cm12.1 recovery
recovery
How can I build a CM12.1 recovery? @simokb1996
recovery
How can I build a CM12.1 recovery? @simokb1996
xEmre66 said:
How can I build a CM12.1 recovery? @simokb1996
Click to expand...
Click to collapse
you build cm12.1 from source or you just port it ????
you have to build recovery from source
you need lunix like ubuntu or fedora to build android
simokb1996 said:
you build cm12.1 from source or you just port it ????
you have to build recovery from source
you need lunix like ubuntu or fedora to build android
Click to expand...
Click to collapse
My mini 2 is here from the repairing station and now i tested it it is booting now its on the bootanimation...
Hello, i have a problem with Cyanogenmod 12.1 When I want Install this ROM, It shows an error executing updater binary in TWRP 2.8.5.0. What should I do?
PS: Sorry for my bad English
wiki3007 said:
Hello, i have a problem with Cyanogenmod 12.1 When I want Install this ROM, It shows an error executing updater binary in TWRP 2.8.5.0. What should I do?
PS: Sorry for my bad English
Click to expand...
Click to collapse
@wiki3007 Yes, I know it. I will fix this soon and update the links. It gives always an error. What exactly is the error? Is it saying "error executing updater binary"???
Yes, that's error
Sent from my GT-S6500D using XDA Free mobile app
I think i fixed the rom. i cant test it because my mini 2 fall into water and now it is in rice for 2 days i test it after 1 week.........
Maybe you can test it and tell me... when my phone works i will build a fully working cm12.1..................................................................
i will upload it now
Fake cm12, this cm11 rom
Sent from my B1-730HD using XDA Free mobile app
Hello guys. Recently i ported Nemesis One for the Galaxy Y Duos.
This is verry stable and it comes with Compact Kernel 1.3
Bugs:
Sim 2
You tell me
Disclaimer: i am not the creator of this rom, all of the credits go to the nemesis team even if they did stupid stuff like copyright things that they don't own. and credits go to the stuff that they used.
Download: https://mega.nz/file/edY0TBIK#eir3JhBaMFAAUZEh21lZh3rYFyur4M8spDHxTHT8c54
(UPDATE: New download link because google removed it.)
Installation
Boot in cwm
Wipe data/reset
Wipe cache
Go to mounts and storage
Format /system
Mount /System, /Data, /Cache and /Sdcard
Install the zip
Press Next, Next, Mark the small box, Select first ''Nemesis Rom'', don't mark the reboot box.
Reboot
Go to cwm again
Install the zip
Now Select The "Nemesis Kernel''
Wait
Reboot
Done!
It's a banned rom here wtf
renz83 said:
It's a banned rom here wtf
Click to expand...
Click to collapse
well the nemesis team did stupid stuff and the original tread had the links removed. its a good rom but it has some bugs
renz83 said:
It's a banned rom here wtf
Click to expand...
Click to collapse
and also your cm7.2 for the galaxy y duos has problems in offline charging. i do have a fix for it!
raphaelgamer981 said:
and also your cm7.2 for the galaxy y duos has problems in offline charging. i do have a fix for it!
Click to expand...
Click to collapse
If it's the white screen
It's because I forgot to include the charging_mode binary from stock and accidentally included totoro's charging binary
Btw wouldn't nemesis kernel brick the device since it's not for duos?
renz83 said:
If it's the white screen
It's because I forgot to include the charging_mode binary from stock and accidentally included totoro's charging binary
Btw wouldn't nemesis kernel brick the device since it's not for duos?
Click to expand...
Click to collapse
it is a white screen. i used the boot.img from the compact kernel 1.2.5 and the nemesis kernel is a newer version of the compact kernel 1.3
renz83 said:
If it's the white screen
It's because I forgot to include the charging_mode binary from stock and accidentally included totoro's charging binary
Btw wouldn't nemesis kernel brick the device since it's not for duos?
Click to expand...
Click to collapse
also why your cm7.2 does not mount the ext2 partition?
raphaelgamer981 said:
also why your cm7.2 does not mount the ext2 partition?
Click to expand...
Click to collapse
It's a bug in biel's cm7 ramdisk
renz83 said:
It's a bug in biel's cm7 ramdisk
Click to expand...
Click to collapse
Check the dzb blog https://web.archive.org/web/2016080...2014/05/zombie-kernel-for-galaxy-y-duos29414/
raphaelgamer981 said:
Check the dzb blog https://web.archive.org/web/2016080...2014/05/zombie-kernel-for-galaxy-y-duos29414/
Click to expand...
Click to collapse
I found a way to install apps in the sdext partition
raphaelgamer981 said:
I found a way to install apps in the sdext partition
Click to expand...
Click to collapse
Never really tried the sd-ext thing since It gave me bootloops
renz83 said:
Never really tried the sd-ext thing since It gave me bootloops
Click to expand...
Click to collapse
It worked for me using zombie kernel
raphaelgamer981 said:
It worked for me using zombie kernel
Click to expand...
Click to collapse
Probably because i have a crappy sdcard
renz83 said:
Probably because i have a crappy sdcard
Click to expand...
Click to collapse
My one is class 4 and It worked the speed is verry good
raphaelgamer981 said:
and also your cm7.2 for the galaxy y duos has problems in offline charging. i do have a fix for it!
Click to expand...
Click to collapse
Off. Charging already fixed in my cm roms.I try nemesis later
ismatovvsanjarbek said:
Off. Charging already fixed in my cm roms.I try nemesis later
Click to expand...
Click to collapse
i still need to fix offline charging in some of my ports