Hi everyone !
I want to know if there any problem to upgrade to IZS 1.1 V30c in Canada.
I've made some research but I'm not sure about the impact this can have on my OB with bootloader v30.
Anyone have tried this from Canada ?
I will give it a try and give you the feedback as soon as I have news.
Everything is backing up.
Wish me luck !
Everything look great but I can't send picture via SMS, i've updated the APN correctly... i'm not sure if it's the problem.
Still trying to fix it.
Everything should work the same. No difference in the phones. Make sure data is enabled when sending or trying to receive MMS. And also that your settings are correct
Sent from my LG-P970 using xda app-developers app
Connection problems
I had to rollback to V20i, i had too many connection (3G) random drop.
I will try to install IZS 1.1 on V20i.
Should work fine. Just be aware that your baseband version will be "unknown" but again should work fine
Sent from my LG-P970 using xda app-developers app
Yes if you only install the Rom, everything look's to be okay.
But I tryed to install Bootloader V30c from Huexxx blog ( Pre-Installation ) and this was the problem.
cstyves said:
Hi everyone !
I want to know if there any problem to upgrade to IZS 1.1 V30c in Canada.
I've made some research but I'm not sure about the impact this can have on my OB with bootloader v30.
Anyone have tried this from Canada ?
Click to expand...
Click to collapse
MEC-777 had similar issues with running in Canada. Maybe these will help:
http://forum.xda-developers.com/showpost.php?p=39292662&postcount=33
http://forum.xda-developers.com/showpost.php?p=39426280&postcount=58
Im sure its just incorrect APN settings because I've had it working on all Roms old boot loader/new boot loader. Its just a matter of setting it correctly and having your data enabled while sending/receiving MMS. If you need a walkthrough to setting it correctly shoot me a pm. I'm also a Canadian user (koodo)
Sent from my LG-P970 using xda app-developers app
jdayscokn said:
Im sure its just incorrect APN settings because I've had it working on all Roms old boot loader/new boot loader. Its just a matter of setting it correctly and having your data enabled while sending/receiving MMS. If you need a walkthrough to setting it correctly shoot me a pm. I'm also a Canadian user (koodo)
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Maybe but I've copied my own APN setting, base on my provider (Telus) web site, and tried APN setting from a friend on the same provider with minor difference, but no success... there's probably differences between Koodo and Telus !?
Set up 2 apns. Fill in all the spots that you would normally port proxy MMS port MMS proxy the mmsc address. And leave the APN type blank on one(default) that'll be your main data one. And on the second set the APN type as mms. That one won't be selectable for data but it will allow MMS messages. Then make sure your data is turned on when sending/receiving. There's only a select few Roms that you don't need to turn on data for it to work.
Sent from my LG-P970 using xda app-developers app
Okay I will give it a try soon and post feedback !
Thx btw ! I appreciate your help ! :highfive:
I'm in Canada
I'm in Canada using Telus. Running baseband from a v30e i extracted from the KDZ file and my APN settings are correct. I have no issues with the service from Telus. I did replace my sim card recently though ( pre IZS v1.1), kept losing signal like I was in a dead spot.
Edit:
here are my settings-
name: Telus SP
proxy: sp.telus.com
mmsc: http://aliasredirect.net/proxy/mmsc
mms proxy: 74.49.0.18
apn type: default,supl,mms
mms port: 80
mnc: 302
mcc: 220
here is the baseband that I use
http://d-h.st/qZE
md5 : ab5e9e6b1f4f03a4a44f68588fb8889c
Related
Hello,
I'm having a strange problem with my Milestone, i upgraded to the official ROM rentail 2.2.1, now it does not connects to the operator, but can browse the internet through 3G. How is this possible?
What do I already did:
- Master Reset
- I changed the baseband to Brazil (I'm from Brazil) through the OpenRecovery
- Use the tool BaseBandSwitcher
- Try different Roms
- I tested an older chip with the same operator
None of this worked, researched a lot and saw that many people have the same problem, but found no solution.
Please help me!
Thank you.
LOL 83 views and 0 replyes? Please help!
Hi there, look I'm no expert but does the proper apn settings show up for your carrier in your settings?
~PsyCl0ne
Sent from my Milestone using XDA App
PsyCl0ne said:
Hi there, look I'm no expert but does the proper apn settings show up for your carrier in your settings?
~PsyCl0ne
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
Yes, APN setting is right for my carrier. = /
I have a question, how can i flash a kernel on my Milestone? I instaled MIUI ROM and i think its changed my kernal, because its have overclock setting.
Thanks.
Aldighieri said:
Yes, APN setting is right for my carrier. = /
I have a question, how can i flash a kernel on my Milestone? I instaled MIUI ROM and i think its changed my kernal, because its have overclock setting.
Thanks.
Click to expand...
Click to collapse
You can't change a kernel on the Milestone. The bootloader is locked so you can't actually flash a custom kernel. The overclock is because of the 10overclock file in /etc/init.d, which overclocks the phone to 1GHz, and 5 steppings, depending on the load that the phone has.
I would try calling tech support for your carrier and having them make sure you meid number (under the battery) matches the one hooked to your account. also check the number under settings/aboutphone/status on your droid.
I flashed using the direction on the thread at:
http://forum.xda-developers.com/showthread.php?t=1287236
i flashed the v21a official gingerbread but now my phone says it is an lg-p920 and although I have gingerbread 2.3.5 I cannot connect to any application that needs data unless I am on a wireless network. I have unlimited data and texting but I cannot figure out why I cannot get a signal. do i need to change some settings? do i need to change my baseband and if so how do I do this? would it be easier to return it to stock settings? thank you in advance for all your help so far.
Only thing I can suggest is have u changed the apn settings on the phone yet there was a thread somewhere on here on wat to set them as if I find it ill post it. As far as the baseband there is none for the us at the moment.
Sent from my LG-P925 using XDA App
thanks mouse, I have been trying to figure out what my apn setting should be since you mentioned that, havent found any yet but ill keep looking.
You can check out this thread by callmearia http://forum.xda-developers.com/showthread.php?t=1293947 hope it helps
Thanks again I got it going
Hello,
I've recently flashed the newly out android 4.2 ROM available in development section. Everything seems fine and runs smooth, but unfortunately, just like the other CM10 roms I've tried flashing, after the flash it seems like I can't connect anymore to my GPRS service. I've tried receiving the configuration message form the provider by using the USSD code entry in the dialer, but had no luck receiving anything. Called the provider and didn't get any help from them either. If there would be any possible help that anyone could help me out with this, I would appreciate it.
Thank you in advance.
nima200 said:
Hello,
I've recently flashed the newly out android 4.2 ROM available in development section. Everything seems fine and runs smooth, but unfortunately, just like the other CM10 roms I've tried flashing, after the flash it seems like I can't connect anymore to my GPRS service. I've tried receiving the configuration message form the provider by using the USSD code entry in the dialer, but had no luck receiving anything. Called the provider and didn't get any help from them either. If there would be any possible help that anyone could help me out with this, I would appreciate it.
Thank you in advance.
Click to expand...
Click to collapse
Not that I can help you, but if you would tell us what country and network you're on then maybe someone could helped you. You can also ask for help in the development tread of the rom that you have problem with.
i guess you have to manually set your apn
Sent from my GT-N7000 using xda premium
[JB:CM10:HYBRID][GT-N7000] PARANOIDANDROID 2.56 [Utacka] [12-12-20]
i falshed [JB:CM10:HYBRID][GT-N7000] PARANOIDANDROID 2.56 [Utacka] [12-12-20]
and i have no 2g/3g data connection
it works on other roms like rocket rom and stock rom
i'm in egypt using etisalat network
any body can help me
Kh.Youssef said:
i falshed [JB:CM10:HYBRID][GT-N7000] PARANOIDANDROID 2.56 [Utacka] [12-12-20]
and i have no 2g/3g data connection
it works on other roms like rocket rom and stock rom
i'm in egypt using etisalat network
any body can help me
Click to expand...
Click to collapse
7ot elshareee7a f mobile tany w copy el apn settings 3ndak b eeedak
Sent from my GT-N7000 using xda premium
Thank You
el5arsawi said:
7ot elshareee7a f mobile tany w copy el apn settings 3ndak b eeedak
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
mesh 3aref a2olak eh. fe elgoon ya basha alf shokr
I updated my galaxy s advance OS from GB(2.3.6) to JB. I live in India and I updated the Russian version of the OS. Everything went fine but, the mobile internet isn't working anymore. When I activate the 'Data roaming' setting the signal strength disappears and reappears if I disable it. I've used the same SIM on another phone(Iphone and Galaxy s advance(on GB)) and found that the 3G Internet connection is working fine. Can someone please provide any tips to troubleshoot this.
Thanks.
hi, did you tried flightmode on/off? i read this as a common workaround
warpers said:
hi, did you tried flightmode on/off? i read this as a common workaround
Click to expand...
Click to collapse
Yes, tried that too but didn't help..All the phone functions are working fine except for mobile data.
you flashed a russian rom? are your mobile internet settings correct for your provider?
warpers said:
you flashed a russian rom? are your mobile internet settings correct for your provider?
Click to expand...
Click to collapse
Yes It was the russian ROM. Internet settings are correct too. The same SIM when inserted in another galaxy s advance running on gingerbread, has the internet activated.
is your JB stock or any custom rom?
It's the custom ROM (russian) doenloaded from --htp://d-h.st/1jN---
Flash modem
Sent from my GT-I9000 using xda app-developers app
Folks..it's resolved now
I had to disable the data roaming first and delete the existing APN. Created a new APN with the same settings and enabled data roaming. It's working perfectly. Thanks a ton for all your responses and help. Much appreciated..Cheers :good:
Hello all i've installed Minimoto v1.7 XT862/XT860 in a Milestone 3 (xt860, personal, argentina) in safestrap and everything went fine.
The problem is i've lost 3g.
It's seems the rom lacks the baseband radio for personal argentina and no internet connection can be established.
It's not an APN issue, tried to load them manually, imported from the stock rom but doesn't work.
Anyone has a way to add basebands (or modify the USA band that only comes with the rom).
The rom works fluid and is very light and the battery is awesome (i cannot tell 3g because never worked, only wifi) but the battery last at least 24 hours using 8-10 hours of wifi aprox.
Thanks in advance
You should look around the mini moto forum in the development category. It involves flashing a different radio and different build.prop
Sent from my XT907 using Tapatalk 2
yes, i've looked in that forum but can't find anything to solve that problem there, besides, i can't post there yet (the forum rules doesn't allow me)
slogar25 said:
You should look around the mini moto forum in the development category. It involves flashing a different radio and different build.prop
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
calpage said:
yes, i've looked in that forum but can't find anything to solve that problem there, besides, i can't post there yet (the forum rules doesn't allow me)
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=1341544
Also try this:
http://forum.xda-developers.com/showthread.php?t=1406812 (the second post)
Make those changes to the build.prop file in the system folder of the minimoto rom, copy the 'new' minimoto zip to your phone, wipe and reflash. That worked for me.
Sure its not an APN issue? Have you tried tried mannualy typing in the APN and username and password for your provider? I have Minimoto on a GSM network and it didn't work at first either but then I just added the right APN values that I looked up on the internet for my provider and then it worked.
Hi,
All you have to do is install minimoto for the xt860, it's in the OP in the minimoto thread. Then, having wifi turned on, install HiAPN (it's an app to automatically set apn's) from Google Play. Use it to set your apn and you're good to go. I'm using it just fine on Movistar Argentina.
Saludos