I there:
I don't know what i did it but i restart my n7000 and it boot loop in the Samsung Galaxy Note logo. May be i screwed installed the last Sweetrom.
I can connect using Odin and CWM is still operational.
What i did it:
-Odin = install a new firmware. = Ok without any problem (installed a couple one including the stock).
-Odin = Installing a new Kernel PhilZ Touch 5
-CWM = Wipe Data / Wipe Cache / Wipe Dalvik / Fix Permission
-remove the microsd memory, the battery and still it fails.
-i ran 120824-151927-emmc_find_brick_start and it founds nothing.
-I even reinstalled 3 times in a rom a firmware without any luck.
What i can do?
Right now, i am installing rom + pit ( and re-partitioning).
ps: In ODIN exists the button PDA and the button PHONE, some guide uses PDA while other guide uses PHONE, what is the correct?.
magallanes2010 said:
I there:
I don't know what i did it but i restart my n7000 and it boot loop in the Samsung Galaxy Note logo. May be i screwed installed the last Sweetrom.
I can connect using Odin and CWM is still operational.
What i did it:
-Odin = install a new firmware. = Ok without any problem (installed a couple one including the stock).
-Odin = Installing a new Kernel PhilZ Touch 5
-CWM = Wipe Data / Wipe Cache / Wipe Dalvik / Fix Permission
-remove the microsd memory, the battery and still it fails.
-i ran 120824-151927-emmc_find_brick_start and it founds nothing.
-I even reinstalled 3 times in a rom a firmware without any luck.
What i can do?
Right now, i am installing rom + pit ( and re-partitioning).
ps: In ODIN exists the button PDA and the button PHONE, some guide uses PDA while other guide uses PHONE, what is the correct?.
Click to expand...
Click to collapse
the one that says PDA is correct (only if there is a single .tar file) moreover before you try that have you tried flashing a Stock ROM(if you already mentioned, i could not understand "even reinstalled 3 times in a rom a firmware without any luck")? If not then i suggest you try that first.
treacherous_hawk said:
the one that says PDA is correct (only if there is a single .tar file) moreover before you try that have you tried flashing a Stock ROM(if you already mentioned, i could not understand "even reinstalled 3 times in a rom a firmware without any luck")? If not then i suggest you try that first.
Click to expand...
Click to collapse
When i mentioned 3 times in a row, i was mentioning this method:
http://forum.xda-developers.com/showthread.php?t=2160676
However, as expected, it did not worked.
And about ODIN :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But apparently PHONE do the same than PDA. I will use PDA for a bit while.
Finally, re-partitioning with PIT did the trick. Thanks anyways.
http://www.androidayos.com/2012/09/...galaxy-note-n7000-unbrick-and-recovery-guide/
Related
I just install the coustom frimware ( r2-update-galaxys-modacocustomcustomrom-signed) and after finishig install it's rebot and stuck on the logo of Samsung i hear the sound of startup but it's still hang on the logo of Samsung please help me i dont know much about it..
1: let it boot, can take some time (5 min) at first boot
it's take more then 15 mintues but nothingjust in the logo of samsung what should i do now??
Take out battery, hold down volume up and home key while u power up.
Make a factory reset and restart again
Take out sd-card first tho.
Do it but same thing still the logo of samsung
What base rom did you have when you flashed Modaco r2?
i had arabic base room after that i put update of mode RC in device and install it so then its appear like that hang on Samsung logo
osasih said:
i had arabic base room after that i put update of mode RC in device and install it so then its appear like that hang on Samsung logo
Click to expand...
Click to collapse
http://android.modaco.com/content/s...rom-for-samsung-galaxy-s-with-online-kitchen/
"Requirements
In order to use this ROM on your device, YOU MUST ALREADY BE RUNNING THE JG1 ROM FROM HERE. Do NOT use this ROM with any other base, unpredictable things will happen, the most likely being you'll have to reflash your device via Odin."
And why use Modacos' rom?
This is better
http://forum.xda-developers.com/showthread.php?t=725194
so what i have to do now how i could go back or use any rom? and how
http://forum.xda-developers.com/showpost.php?p=7152078&postcount=2
is this useful and guide and thanks bro for the help thanks again
Still same the site that u gave the same instruction i do it but the problem is the logo of Android installation in mobile it appear it remain in the recovery mode and.
I add the CSC and PDA and Phone in Odin when i start it just analysis the file and so on not work
i download the file from https://www.wuala.com/Samsung Galaxy S/Firewares
frimware I9000XWJG1 and CSC CODE MODEM
osasih said:
i download the file from https://www.wuala.com/Samsung Galaxy S/Firewares
frimware I9000XWJG1 and CSC CODE MODEM
Click to expand...
Click to collapse
Ok. Follow these steps EXACTLY:
1. Make sure you have odin, the I9000XWJG5 firmware and the file that ends on "512.pit".
2. Reboot your PC.
3. Disable your antivirus, firewall and all similar programs!
4. Reboot your PC again.
5. Run odin directly after boot!
6. Select the files in odin.
7. Take the battery out of your phone.
8. Put it back in and press "volume down"+"home"+"power"
9. Connect your phone to your pc via usb cable and wait for odin to recognize it.
10. Press start in odin.
11. Wait!
Do these steps exactly in this order and you should be fine.
Sent from my GT-I9000 using XDA App
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL] Uploaded with ImageShack.us[/IMG]
Uploaded with ImageShack.us
Uploaded with ImageShack.us
just like that hang in recovery and the odin just analysis the files
osasih said:
just like that hang in recovery and the odin just analysis the files
Click to expand...
Click to collapse
Tick the "Repartion, Auto reboot and F.reset time" checkboxes.
Use the attached PIT file.
(remove the zip extension)
the attach file is courrpt.....and i donwload it and it gave error
My sons UK i9000 has a problem, the touch keys were not working and the screen was cracked., so a replacement part was bought and new screen fitted.
The phone booted fine, but the new touch keys did not work, so we tried to update the touch key firmware with *#*#2663#*#* but then the phone refused to boot.
We tried to reflash to a stock rom, which went all ok with odin, but the phone never got past the galaxy s screen.
We have tried loads of different stock and custom roms, including darky's ressurection, but they all either boot to the galaxy s screen and go no further, or boot to the galaxy s screen then reboot after a short while.
Is there anything we can do, we can still access recovery and download mode.
Many thanks.
did you flash the official rom using the ".pit" file? i can only suggest this and this
hope it helps
gigeaky said:
did you flash the official rom using the ".pit" file? i can only suggest this and this
hope it helps
Click to expand...
Click to collapse
Many thanks for the links, tried the gingerbread rom you linked to, phone boots to galaxy s screen, stays there for a while, then constant reboots again.
I'm having the same problem as OP.
Does anybody have any other ideas?
Flash stock JVT firmware (check repartition) use 512 pit, flash Semaphore kernel. Go into CWM recovery, do a factory wipe. It should be good.
Nope, same problem, everything passes ok in odin, but the phone still reboot loops.
Would a faulty touch key cable cause it to do this or maybe something more serious?
Many thanks.
put your device in download mode and use this:
http://files.teamkomin.com/i9000SGS/i9000-XXJVT-One-Click.jar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to recover my galaxy s I9000 using odin, i had the 512 pit file and stock rom image 2.2froyo, and now mine doesnt even come on anymore, i could get it to go into download mode when the flash failed by taking the battery out unplugging usb, then plug usb in, hold both volume buttons and insert the battery, that worked for me until odin had succeeded, everything was correct, I did days and days of research about it before I went through with it, but now that it successfully flashed, the phone no longer enters download mode or see's any ounce of life, would the jig still work to force the phone to come on?
Tried the one click, first attempt it boots to the first GT I9000 and stays there.
Then tried with flash bootloaders ticked, but bootloops again.
Starting to loose faith in this phone.
if your son's phone was previously on Froyo, you may need to tick "flash bootloaders" in OneClick...
After flashing MIUI Jelly Beans I wanted to go back to stock 2.3 ROM to check on something and did a restore with CWM which didn't work because (as I've learned later) it uses different file system, anyway I've flashed s1_odin_20100512.pit file alone with Odin, and the result is that I can only turn the phone on in download mode.. What can I do now?
Thanks to everybody in advance..
I've tried to flash stock ROM using the method mentioned in this thread:
http://forum.xda-developers.com/showthread.php?t=1494493
and after finishing, Odin gave me "Fail".. What does it mean and what should I do now?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tried to flash it again, now I'm stuck on "Set Partition" on Odin. is it safe to turn the phone off at this point and try again?
Anyone?
ramy670 said:
Tried to flash it again, now I'm stuck on "Set Partition" on Odin. is it safe to turn the phone off at this point and try again?
Click to expand...
Click to collapse
you have KIES running in the background shut it down, get solutions from My Android Solutions for Odin stuck
But First powerdown, pull out Battery, SIM CARD, and EXT SD card, press power
button for a minute , than powerup without SIM and Ext.SD Card...make sure you
have more than 50% battery charge before you attempt any sort of flashing
Thanks a lot, and yes Samsung Kies was running in the background while I was trying to flash, I'll make sure it is shutdown this time, anyway the battery is almost at zero now and the phone isn't charging, so I'l have to wait for a friend who has SGS until tomorrow so I can charge the battery and try to flash the phone again.
On the other hand, I remembered something that might be important, which is that my phone have problems with internal memory (when you have error messages like "E:format_volume: rfs format failed on /dev/block/mmcblk0p2"), not sure if it had something to do with failing to flash stock ROM besides having Samsung Kies running in background (because I got stuck on "Set Partition" in Odin only one time), so there might be something else ausing these problems..anyway I'll try to flash it again tomorrow and see what happens.
Thanks again.
ramy670 said:
so there might be something else ausing these problems..anyway I'll try to flash it again tomorrow and see what happens.
Click to expand...
Click to collapse
Look at My Android solutions again, for other problems, when you Flash bootloader, tick update bootloader too
when you Flash bootloader, tick update bootloader too
Click to expand...
Click to collapse
You mean during flashing the ROM right? or should I flash bootloader separately?
(I didn't touch my phone yet, still waiting for my friend for recharging)
ramy670 said:
You mean during flashing the ROM right? or should I flash bootloader separately?
(I didn't touch my phone yet, still waiting for my friend for recharging)
Click to expand...
Click to collapse
yup, just tick it, can be done separately too
Thanx a lot, the phone is working again, it turned out that you must use Windows account that have administrator privileges in order for the flashing process to work (not sure though cuase I've tried admin account after restart, so may be restarting PC was the answer)
Hi all,
I recently bought a S3 4G and was testing some custom roms, such as CM11, omni and PAC-man.
But now i wish return to stock, so i launched odin, wiped data, cahce, system, them put phone into download mode and started flashing.
After this, i leave the phone there and waited about 10 min, odin was stucked at RECOVERY.img.
I flashed this phone with ODIN before and everything went fine. My ODIn is 3.07, samsung drivers are installed. Have anyone had this issue? How can i solve it? Bellow is a image of how ODIN stays
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
shucrut said:
Hi all,
I recently bought a S3 4G and was testing some custom roms, such as CM11, omni and PAC-man.
But now i wish return to stock, so i launched odin, wiped data, cahce, system, them put phone into download mode and started flashing.
After this, i leave the phone there and waited about 10 min, odin was stucked at RECOVERY.img.
I flashed this phone with ODIN before and everything went fine. My ODIn is 3.07, samsung drivers are installed. Have anyone had this issue? How can i solve it? Bellow is a image of how ODIN stays
View attachment 2435664
Click to expand...
Click to collapse
Download may be faulty, go here for a stock rom.
http://samsung-updates.com/device/?id=GT-I9305 :good:
Raistlin1158 said:
Download may be faulty, go here for a stock rom.
http://samsung-updates.com/device/?id=GT-I9305 :good:
Click to expand...
Click to collapse
Thanks for replying
The problem was not the downloaded file. In fact i didnt discover what the problem was yet, but this is what i did:
Installed galaxy project rom, installed and ran triangle away and left the phone into download mode.
Reinstalled pc drivers and odin aswell. Reboot pc
After these steps, the flash via odin worked, i dindt figure out why this hapenned but im glad i have my s3 stock again.
Probably drivers .
HELP!
S20 FE 5G SM-G781B.
I am at my wits end here. I have tried and tried, but, nothing... tried flashing TWRP with Odin multiple times (and versions), get a A-OK, installed fine, then try to boot into recovery... and it's just standard recovery.
You must disable auto reboot in Options tab in odin.
I've done that. No Bueno. I've been (trying to) follow this guide, but when it comes to the "press Vol Up+Vol Down+Power Button to enter Recovery" it just... doesn't work.
EDIT: Well, with USB connected Vol Up+Vol Down+Power Button just dumps me in Download Mode...
Try volume up+power only.
That just boots me into the standard recovery.
Thanks for taking time to help me, btw
Try another version of odin then
I SWORE I had tried different versions of Odin.. I have 3 versions downloaded (3.10, 3.12, 3.14). Odin3 v3.12 did the trick... somehow... so far, so good. But of course, when one problem seemingly gets solved, another one arises...
I can't find the zips (multidisabler-samsung-2.6a, Magisk-v21.4) in TWRP. I'm about to chuck this stupid phone out the window.
EDIT: I hate this stupid phone. One step forward, two steps back...
does usb connect to computer?
Yes. But when I connect in TWRP I just get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And I can't copy any files to the Internal Storage.
Connecting 'normally' I can access my SD card and Internal Storage as normal.
It seems like the TWRP fried something on your phone......Does 'adb push files' work(I can elaborate on this if needed)
Figures Hope it's nothing irreversible.
The TWRP I'm flashing is twrp-3.5.0_10-2_afaneh92-Q-r8q. You know if this is the right one?
What android version are you on?
11
Then you have used wrong TWRP, as expected. This is the right one:
twrp-3.5.0_10-2_afaneh92-r8q.tar | by mohammad.afaneh for Galaxy S20 FE 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Friendly Remind you that you need to reboot directly into download mode and flash this recovery(i.e.AVOID booting into stock rom)(Surely, disable auto reboot)
Q means built for Android 10 and R means built for Android 11.You used 10 TWRP on 11 ROM so it is buggy.
Good to know about the Q/R difference, thx.
But flashing the R version yields the same results
herringson said:
Good to know about the Q/R difference, thx.
But flashing the R version yields the same results
Click to expand...
Click to collapse
Nooooo! That may really be a irreversible damage. Try factory reset in TWRP or/and reboot into stock rom, which may help.
herringson said:
I'm about to chuck this stupid phone out the window.
Click to expand...
Click to collapse
I am afraid if this nightmare come true
herringson said:
Figures Hope it's nothing irreversible.
Click to expand...
Click to collapse
Maybe more than figures. The whole data partition can be corrupt. Factory reset (format data) in TWRP for android 11. Hate to say but you have to say farwell to all your files, to say the least.
Meh, I don't have any data worth saving, so that's no biggie... I just want to root this damn phone...