Related
So what I did was I was on Rocket Rom. I wanted to switch roms back to gingerbread stock to check out the diffrence in battery life. So I did a flash with Oden and all wen't fine. After that I went to stock ics 4.0.3 to check the diffrence in battery life. After I've seen enough of stock ics I wanted to go to classic rom v6. At first I flashed it with Odin but it got stuck at the gt n-7000 logo. I then reflashed it again and I still had the same problem. I then reverted back to stock ics but it won't work with Odin. I get stuck at factoryfs.img, and If I try odin with gingerbread it goes a little further but is then also stuck.
Did I super brick my phone?
Edit: I also can't get in recovery anymore, only in download mode. My pc picks up my phone if I connect it
I did some factory wipes etc but I'm not certain on which kernel/rom I was then.
You seem to have soft bricked your phone!
Take your battery out for 15 seconds, put it back in and hit the keys to get into download mode: VOL DOWN + HOME + POWER!
After you are in download mode flash HydraCore kernel on your phone (is it a safe kernel)
After your phone reboots to the same steps as above but instead of VOL DOWN, hit VOL UP + HOME + POWER
AND you should enter recovery mode!
In there do a full wipe which consists in:
wipe data and factory reset
wipe cache
Mounts and storage -> format /system
Advanced -> wipe dalvik cache
And flash the rom and you are good to go
zylor said:
You seem to have soft bricked your phone!
Take your battery out for 15 seconds, put it back in and hit the keys to get into download mode: VOL DOWN + HOME + POWER!
After you are in download mode flash HydraCore kernel on your phone (is it a safe kernel)
After your phone reboots to the same steps as above but instead of VOL DOWN, hit VOL UP + HOME + POWER
AND you should enter recovery mode!
In there do a full wipe which consists in:
wipe data and factory reset
wipe cache
Mounts and storage -> format /system
Advanced -> wipe dalvik cache
And flash the rom and you are good to go
Click to expand...
Click to collapse
Omg if this works, then I buy you a beer
Ok I did a succesfull flash on the kernel. Now I can boot up in recovery mode and I wanted to wipe data but it's stuck at it
Message is:
CWM-based recovery v6.0.1.2
-- Wiping data...
Formatting /data...
and there it's stuck, any idea?
Force it to reboot and do the same steps to reenter recovery!
When in recovery do: Advanced -> Reboot recovery
Then try to flash a cyanogenmod rom directly and gapps
For example this one:
http://forum.xda-developers.com/showthread.php?t=1761190
and give me some feedback
---------- Post added at 04:59 PM ---------- Previous post was at 04:55 PM ----------
If the above steps don't work tell me and we are going to do one thing!
But i will explain afterwards
zylor said:
Force it to reboot and do the same steps to reenter recovery!
When in recovery do: Advanced -> Reboot recovery
Then try to flash a cyanogenmod rom directly and gapps
For example this one:
http://forum.xda-developers.com/showthread.php?t=1761190
and give me some feedback
Click to expand...
Click to collapse
Can I also try RocketRom or Kingdroid v8 by dr tailly or alliencerom? Or can I try to flash stock ics with Odin?
Since I don't have cyanogenmod currently and I'm kinda low on bandwitch, or is it a must?
Or this one:
http://forum.xda-developers.com/showthread.php?t=1765307
That's the one I wanted actually
Does the data wipe have something to do with that yellow triangle I get when I boot up the phone at the gt n-7000 logo?
Razors123 said:
Does the data wipe have something to do with that yellow triangle I get when I boot up the phone at the gt n-7000 logo?
Click to expand...
Click to collapse
Think that's a flash count. If you go into download mode it may have a count for custom flashes. If so you need to use triangle away to clear it.
Sent from my GT-N7000 using xda app-developers app
SpyderTracks said:
Think that's a flash count. If you go into download mode it may have a count for custom flashes. If so you need to use triangle away to clear it.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yes indeed, now it says I have 1 count.
I can't seem to use any rom to recover from trough the recovery mode. They all seem to fail?
Everytime I get an error (status 0)
Anyone a clue on what to do now?
Razors123 said:
I can't seem to use any rom to recover from trough the recovery mode. They all seem to fail?
Everytime I get an error (status 0)
Anyone a clue on what to do now?
Click to expand...
Click to collapse
That error is usually caused by an incompatible update-binary in edify ZIPs. Replacing it with a compatible one, then re-signing the ZIP, will usually fix that error,
Bottom line, something's wrong with your cwmr, henceforth you can't install ROMs from there..(unless you fix your updater script and update the binary file in cwmr). For now, just use PC Odin to flash your custom ROM.
letters_to_cleo said:
That error is usually caused by an incompatible update-binary in edify ZIPs. Replacing it with a compatible one, then re-signing the ZIP, will usually fix that error,
Bottom line, something's wrong with your cwmr, henceforth you can't install ROMs from there..(unless you fix your updater script and update the binary file in cwmr). For now, just use PC Odin to flash your custom ROM.
Click to expand...
Click to collapse
But the problem is I can't flash any roms from pc odin because they seem to be stuck at factoryfs.img, and I googled that problem and that seems to be related to a super brick
^its partly related on that...
tell you what, have you tried first running the partition scan on your device to check for bad /corrupted blocks? if not yet, do try running that program... you can verify for yourself that your Note might or might not have those bad blocks already... run it first and post your results here after.
letters_to_cleo said:
^its partly related on that...
tell you what, have you tried first running the partition scan on your device to check for bad /corrupted blocks? if not yet, do try running that program... you can verify for yourself that your Note might or might not have those bad blocks already... run it first and post your results here after.
Click to expand...
Click to collapse
What program should I use for that?
^ http://forum.xda-developers.com/showthread.php?t=1823918 (courtesy of hg42)
letters_to_cleo said:
^ http://forum.xda-developers.com/showthread.php?t=1823918 (courtesy of hg42)
Click to expand...
Click to collapse
Wel looks like its stuck?
This is what it displays:
mmc=mmcb1k0
/dev/block/mmcb1k0p1
scanned 19 MiB = 20 MB Completed --> OK
/dev/blockmmcb1k0p10
That's what it shows
EDIT: Oh wait I've downloaded this one 120824-151927-emmc_scan_all_partitions_once.zip - [Click for QR Code] (400.7 KB, 468 views)
I think I should download the one with brick and start, sorry for confusing you
Ok so I ran the program starting from 0 and and it stopped at 1023MiB so it means that block or the blocks after that are bricked.
Any possible solution?
Thanks
^ so listen, now that you've verified you have some bad blocks on your phone, the only other method you can do is using the pit file method - http://forum.xda-developers.com/showthread.php?t=1667886, (credits still to hg42), this will in itself will partition your file system to get over those bad blocks (drawback on the end result is that you will lose much ram on your phone) but still have a working phone nonetheless.
letters_to_cleo said:
^ so listen, now that you've verified you have some bad blocks on your phone, the only other method you can do is using the pit file method - http://forum.xda-developers.com/showthread.php?t=1667886, (credits still to hg42), this will in itself will partition your file system to get over those bad blocks (drawback on the end result is that you will lose much ram on your phone) but still have a working phone nonetheless.
Click to expand...
Click to collapse
Well can I get rid of that yellow triangle without a jtag since I can't boot up and run Triangle Away. Because if I cant I will go to the pit file method. Otherwise I will send it to a samsung service
EDIT: I found this thread:
http://forum.xda-developers.com/showthread.php?t=1663237
Where you flash a kernel that would reset binary counter and removes the yellow triangle. Downside is that it has caused many hard bricks but since I'm already hard bricked it wouldn't matter I assume? So then I can safely return it to my samsung point.
edited:
yeah if you can find a way to use a usb jig to reset your binary counter theh your good to go in sending your phone to SSC.
Hello!!!
i have just updated my cwm to the latest available version. however, once the phone flash it, i am unable to connect to my mobile provider. A sign keeps poping out to ask me to insert sim card when its already inside. My phone is rooted and currently running on stock gingerbread rom. ALL HELP IS MUCH APPRECIATED!! i tried restoring my system restore and factory reset. but none works
you updated your cwm with what file with what method?
kromosto said:
you updated your cwm with what file with what method?
Click to expand...
Click to collapse
the zip file was downloaded from http://forum.xda-developers.com/showthread.php?t=1781899 and i flash it via CWM manager.
try flashing hydracore or another kernel that is ok for your rom with pc odin and try again.
kromosto said:
try flashing hydracore or another kernel that is ok for your rom with pc odin and try again.
Click to expand...
Click to collapse
i realize i flash the wrong CWM which might have resulted in the problem. when i booted the phone into recovery mode and tried to re flash the right one, there is still no change. sorry for the question, but when i flash hydracore with pc odin, i place the file in PDA box?
yes pda box. if cwm has a problem then flashing with it may cause bigger problems so using pc odin is much safer i think.
sometimes kernel mite not be able to override the installed recovery image.. if that then install the rom again using pc odin.
kromosto said:
yes pda box. if cwm has a problem then flashing with it may cause bigger problems so using pc odin is much safer i think.
Click to expand...
Click to collapse
Hi, i have just flash it. however it now refuse to start up. its has this triangle ! sign appearing when i start the phone.
boot into recovery and do a factory reset. yes the yellow triangle will be there as u flashed a custom. kernel from odin.
you can remove that with triangle away app by chainfire. by refuse to start up you mean you cant enter download mode? i hope trying to flash something with wrong cwm didnt make any harm. if you can enter cwm menu you can try wipeing to factory reset cache and dalvik cache. if no cwm but download mode flashing a stock gb may help.
kromosto said:
you can remove that with triangle away app by chainfire. by refuse to start up you mean you cant enter download mode? i hope trying to flash something with wrong cwm didnt make any harm. if you can enter cwm menu you can try wipeing to factory reset cache and dalvik cache. if no cwm but download mode flashing a stock gb may help.
Click to expand...
Click to collapse
as in it doesn't move away from the samsung screen . its stuck there. and constantly boot itself into recovery. i did the factory wipe twice but nothing seems to be working. im going to try to flash back a stock rom and see if it works *cross fingers*
factory wipe cache wipe and dalvik cache wipe. if you done all that and no go flashing a gb rom with pc odin is the only way to try right now.
Flash a stock rom via pc Odin then wipe everything
samo_gf said:
Flash a stock rom via pc Odin then wipe everything
Click to expand...
Click to collapse
kromosto said:
factory wipe cache wipe and dalvik cache wipe. if you done all that and no go flashing a gb rom with pc odin is the only way to try right now.
Click to expand...
Click to collapse
hi all. i tried all. but apparently, i still cant connect to my mobile operator it keeps promting me to insert my sim card when it is in already..
still the same insert sim card problem?
kromosto said:
still the same insert sim card problem?
Click to expand...
Click to collapse
i tried my sim card in my friends phone and its working fine. oh dear. i don't even know what i have done to my phone now.
are you sure about your sim socket. clean it make sure sim card fits ok.
Hi all! since i am limited to only 5 thanks per day, i would like to thank you all for your help. :angel: the problem lies in the fact that for some reason the flashing of the wrong cwm kinda screwed my IMEI no. I brought it back to Samsung who charged me $152 to replace my motherboard though i have no idea what restoring IMEI no. got to do with replacing Motherboard.
thesotongkid said:
I brought it back to Samsung who charged me $152 to replace my motherboard though i have no idea what restoring IMEI no. got to do with replacing Motherboard.
Click to expand...
Click to collapse
For the same reason you flashed a wrong CWM.
Sent from my GT-N7000 using xda app-developers app
thats y u need a backup of EFS
I just flashed T-Mobile firmware and i got bootloop. It's not CWM bootloop. I can go in download mode but i can't go in recovery. I don't know what to do, and help will be appreciated.
digitz_ said:
I just flashed T-Mobile firmware and i got bootloop. It's not CWM bootloop. I can go in download mode but i can't go in recovery. I don't know what to do, and help will be appreciated.
Click to expand...
Click to collapse
connect your phone to the computer
go into donwload mode
start odin
flash http://www.hotfile.com/dl/176669754/95e7a92/S6500DXXLD3_S6500DPROLD1_PRO.zip.html
RoSinner said:
connect your phone to the computer
go into donwload mode
start odin
flash
Click to expand...
Click to collapse
Nope, still same thing.
digitz_ said:
Nope, still same thing.
Click to expand...
Click to collapse
you flashed the file I linked and you're still getting a bootloop ? you must be doing something wrong
RoSinner said:
you flashed the file I linked and you're still getting a bootloop ? you must be doing something wrong
Click to expand...
Click to collapse
What can I do wrong? I putted MD5 in PDA and flashed.
I tried to flash CWM and diffirent firmwares but no luck.
digitz_ said:
What can I do wrong? I putted MD5 in PDA and flashed.
Click to expand...
Click to collapse
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Galaxy_Rohit said:
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
I was flashing before like this, everything was fine. There must be a way to fix this.
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Galaxy_Rohit said:
As I know, the one package file of extension (.tar.md5) is placed under One Package field & not in PDA.
Also u need an ops file which should be placed under OPS field.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
nah we can flash one package with pda
How did you fix it?
digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
Hello, I'm having exactly the same problem. I went back to stock from cm10, but now I have a bootloop (boots until samsung logo and reboots.)
I think I just need to wipe data, but I can't access recovery. I even flashed cwm a few times and flashed the stock rom with a pit file, but I'm still stuck on samsung logo.
So, any help?
Here: http://forum.xda-developers.com/showthread.php?t=1853159
bro .. use odin
first switch to download mode then connect ur mob with pc , then use odin and update it with original pda ..
digitz_ said:
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
How did you do it, I cannot install adb drivers for some reason, I went back from CM10.1 to stock but now it just keeps repeating boot animation. Please help.
tom1890 said:
Hello, I'm having exactly the same problem. I went back to stock from cm10, but now I have a bootloop (boots until samsung logo and reboots.)
I think I just need to wipe data, but I can't access recovery. I even flashed cwm a few times and flashed the stock rom with a pit file, but I'm still stuck on samsung logo.
So, any help?
Click to expand...
Click to collapse
Hi, I had exactly the same problem, flashed the stock firmwire but it gets stuck on samsung logo, flashed few CWMs but nothing. I really didn't know what to do, then my battery became critical so i connected it to the pc and let it charge. While charging, I tried to acces the CWM recovery (home+volume up+volume down + power) and BAM! It opened recovery, I deleted all user data, cache and factory reset, rebooted and it worked.
Try to flash stock rom
Flashing stock rom didn't work.
Sent from my GT-S6500D using Tapatalk 2
digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
how did you fix this? i have exactly the same issue.
polys643 said:
how did you fix this? i have exactly the same issue.
Click to expand...
Click to collapse
Hi All,
I was struggle with bootloop issue for 3 days. I got my problem when I forgot to wipe phone returning ROM 10.2 to stock rom. Before I didn’t have any problems with getting to recovery mode but after I was not able to get to CWM. Also did try (vol+) (vol-) (home) hold while odin reset all I get RUMDAMP ARM9. Same when trying to hold recovery combination while normal boot. I have no problems with getting to Download mode.
Phone show Samsung animation and then vibrate once, pause, vibrate twice.
What work for me.
Recovery Combination = (vol+) + (vol-) + (home) + (pwr)
1. With odin 3.04 (don know if version matters I hade SS_DL.dll in same folder as odin) I install cwm-6.0.3.3-b2-jena.tar.md5
2. It restarted and get boot loop again
3. When I hold recovery combination phone didn’t boot. But what did I remove battery plug it again. Press (pwr) and immediately (maybe 0.5 sec) I hold rest of the recovery combination. Phone boot and show me logo so I release the buttons. To my surprise I did boot to CWM. (don’t know way but I didn’t do wipe immediately but I restart did try it again to be sure if this works – and it did, at least for me)
Rest was easy (WIPE Factory Reset, Cache, Dalvik Cache and just in case fix permission) restart and did boot to Stock ROM. For some unknown reason now I can normally CWM just buy holding combination and releasing as soon as Samsung logo show up.
I hope this will help somebody.
Now im using CM 10.1 07/07
My phone is S6500D no NFC
Cheers,
Maciej
digitz_ said:
Nobody? Is anything possible with adb or fastboot?
EDIT: I fixed it. Thanks anyway.
Click to expand...
Click to collapse
pleeees tell me how u fix it my phone hase the same proplem u had can u
Today I was with Cyanogenmod 10.1 but I decieded to put Stock 2.3.6. I downloaded it from samfirmware and flashed it via ODIN. Then phone rebooted as normal but stuck ot samsung logo, vibrated and then vibrated two fast times. I putted CMW but I can't get into it. I can only get into download mode. The phone is just rebooting.. I reflashed with ODIN but no result. What to do ?
Reflash stock rom then flash cwm and then wipe data cache dalvik format system and reflash stock rom.
Same problem after installing Cyanogenmod 10, i can't enter in recovery i try to reflash many times recovery and firmware but nothing...
I can only enter in download mode, because i get bootloops in samsung logo.
Any idea?
and what do you mean by "can enter recovery?"
TheWhisp said:
and what do you mean by "can enter recovery?"
Click to expand...
Click to collapse
if i press home+power+volumeup+volumedown it doesn't do nothing
sando99 said:
Today I was with Cyanogenmod 10.1 but I decieded to put Stock 2.3.6. I downloaded it from samfirmware and flashed it via ODIN. Then phone rebooted as normal but stuck ot samsung logo, vibrated and then vibrated two fast times. I putted CMW but I can't get into it. I can only get into download mode. The phone is just rebooting.. I reflashed with ODIN but no result. What to do ?
Click to expand...
Click to collapse
follow these :
1. flash stock gb using odin
2. by pressing the button for ur phone which takes u into stock recovery mode, do a factory reset..
3. now reboot and u wont have any boot loops..
the method in 2nd post is not at all suggested since stock GB has nothing to do with insecure/nand recovery...it only makes things unstable afaik..
gudluck..
just hold the buttons a little longer.. I had the same problem like ~2-3 months ago. Make sure you wipe data before re-flashing stock, since Odin is not doing that.
TheWhisp said:
just hold the buttons a little longer.. I had the same problem like ~2-3 months ago. Make sure you wipe data before re-flashing stock, since Odin is not doing that.
Click to expand...
Click to collapse
Nothing happens...
TheWhisp said:
just hold the buttons a little longer.. I had the same problem like ~2-3 months ago. Make sure you wipe data before re-flashing stock, since Odin is not doing that.
Click to expand...
Click to collapse
I hold the buttons for 2-3 minutes, but nothing...
And after flashing CMW 5.0.2.8 or 6.0.2.8 with ODIN nothing happens too...
flash with re-parition (select pit file).. but I have never done that, so... I guess that's the only way to wipe data. I had a similar problem, flashed stock without wiping data and got bootloop. At first I couldn't get into recovery, but later on I somehow could. When exactly you get bootloop? After the GT-S6500 boot logo? What device D/I/T etc. What ROM/recovery you had when you flashed stock? (including dates and versions)
Next time provide more info, we don't have a crystal ball.
I have an idea - can somebody give me stock 2.3.6 but full firmware package (PIT, BOOTLOADER, PDA, PHONE and CSC).
There is no bootloader to flash. Those one-package tars are the only packages. Answer to the above questions. Learn to describe your problem properly.
TheWhisp said:
flash with re-parition (select pit file).. but I have never done that, so... I guess that's the only way to wipe data. I had a similar problem, flashed stock without wiping data and got bootloop. At first I couldn't get into recovery, but later on I somehow could. When exactly you get bootloop? After the GT-S6500 boot logo? What device D/I/T etc. What ROM/recovery you had when you flashed stock? (including dates and versions)
Next time provide more info, we don't have a crystal ball.
Click to expand...
Click to collapse
Sorry xD
Then:
- I get booloop after GT-6500 logo, i have samsung bootanimation, after the phone vibrates two times and get booloops
- My device is a 6500(noD)
- ROM was CM 10 24/03 (With first libcam and otg) and recovery CWM 6.2.0.8
Tryed to flash with .pit file - NOTHING ! DAMN IT !
sando99 said:
Tryed to flash with .pit file - NOTHING ! DAMN IT !
Click to expand...
Click to collapse
Did you activate repartiton checkbox?
Sent from my GT-S6500D using xda app-developers app
Porobu said:
Did you activate repartiton checkbox?
Sent from my GT-S6500D using xda app-developers app
Click to expand...
Click to collapse
Yeah, it checks automatically when I select the .pit file.
Take out battery for some time, put it back in and then try.
Porobu said:
Did you activate repartiton checkbox?
Sent from my GT-S6500D using xda app-developers app
Click to expand...
Click to collapse
Me yes, and it doesn't work because odin fail
now i had this problem 10 min ago
i just went to downloading mod then installed cwm6
then went to recovery mod then wiped data/factory reset and wiped cache partition and wiped dalvick cach and formated emmc and system then reboot my phone and again went to downloading mod and reinstalled ROM.
finished
After I upgraded from Froyo to GB 2.3.6 via Kies, the screen take about 2 sec to turn on while it take instantly to turn off.
erik8xda said:
After I upgraded from Froyo to GB 2.3.6 via Kies, the screen take about 2 sec to turn on while it take instantly to turn off.
Click to expand...
Click to collapse
You can try to wipe data/factory reset and wipe cache partition via Stock recovery (you will lose all your data apps, sms, phones, notes etc, if you don't backup it first) but It could work
Maybe froyo's old files are interfering with the new ones
Viper The Ripper said:
You can try to wipe data/factory reset and wipe cache partition via Stock recovery (you will lose all your data apps, sms, phones, notes etc, if you don't backup it first) but It could work
Maybe froyo's old files are interfering with the new ones
Click to expand...
Click to collapse
I got used factory data reset and formatted SD card from the phone itself before after I updated to GB 2.3.6. Is it better to use Stock recovery instead the phone itself? Is it enter Stock recovery by press Home and Power buttons when the phone off?
erik8xda said:
I got used factory data reset and formatted SD card from the phone itself before after I updated to GB 2.3.6. Is it better to use Stock recovery instead the phone itself? Is it enter Stock recovery by press Home and Power buttons when the phone off?
Click to expand...
Click to collapse
Well, I prefer to use recovery, It's faster and you can wipe cache partition
Yes, when shut down your phone and push Home + Power until recovery mode boots
Viper The Ripper said:
Well, I prefer to use recovery, It's faster and you can wipe cache partition
Yes, when shut down your phone and push Home + Power until recovery mode boots
Click to expand...
Click to collapse
It still the same after I did what you said.
erik8xda said:
It still the same after I did what you said.
Click to expand...
Click to collapse
well, you can try flashing a fresh stock via Odin too
Viper The Ripper said:
well, you can try flashing a fresh stock via Odin too
Click to expand...
Click to collapse
Can you teach me how to do it, please?
erik8xda said:
Can you teach me how to do it, please?
Click to expand...
Click to collapse
All you need is here http://forum.xda-developers.com/showthread.php?p=12874680 if you have GT-S5830 model
You will find official firmwares in sammobile.com , you need to create an account in order to download firmwares
You should have a look at this too It will be really useful for you
http://forum.xda-developers.com/showthread.php?t=2185700
Viper The Ripper said:
All you need is here http://forum.xda-developers.com/showthread.php?p=12874680 if you have GT-S5830 model
You will find official firmwares in sammobile.com , you need to create an account in order to download firmwares
You should have a look at this too It will be really useful for you
http://forum.xda-developers.com/showthread.php?t=2185700
Click to expand...
Click to collapse
I can't turn on the phone after I flashed to stock froyo 2.2.1 via odin. Did I damage the phone already?
WHAT?¿?
Didn't flash GB?¿ Well I don't know about froyo I didn't try it (but think to go back to froyo It's possibe :S), Can you boot into recovery/download mode¿? First of all try to do wipe factory reset and cache partition after to flash the new rom, Maybe your device get a bootloop.
If it doesn't work try to flash again your phone with GINGERBREAD firmware
Viper The Ripper said:
WHAT?¿?
Didn't flash GB?¿ Well I don't know about froyo I didn't try it (but think to go back to froyo It's possibe :S), Can you boot into recovery/download mode¿? First of all try to do wipe factory reset and cache partition after to flash the new rom, Maybe your device get a bootloop.
If it doesn't work try to flash again your phone with GINGERBREAD firmware
Click to expand...
Click to collapse
I did flash GB 2.3.6 downloaded from Sammobile. I can't boot into those modes. I removed the battery for 30 mins and then I tried to boot into those modes but still can't. I think I destroyed my phone.
erik8xda said:
I did flash GB 2.3.6 downloaded from Sammobile. I can't boot into those modes. I removed the battery for 30 mins and then I tried to boot into those modes but still can't. I think I destroyed my phone.
Click to expand...
Click to collapse
Try it http://forum.xda-developers.com/showthread.php?t=1071970
Viper The Ripper said:
Try it http://forum.xda-developers.com/showthread.php?t=1071970
Click to expand...
Click to collapse
I tried the method from the thread but it didn't work. After I browsed the thread, I found out I should try Usb Jig. It helps me enter download mode after I plug it into my phone. For Froyo, I found out I shouldn't install one package instead install full package. Do you know where can I download the full package?
erik8xda said:
I tried the method from the thread but it didn't work. After I browsed the thread, I found out I should try Usb Jig. It helps me enter download mode after I plug it into my phone. For Froyo, I found out I shouldn't install one package instead install full package. Do you know where can I download the full package?
Click to expand...
Click to collapse
Sure, Russian firmware KPH and Germany KTE are full package, you can found it in sammobile
Viper The Ripper said:
Sure, Russian firmware KPH and Germany KTE are full package, you can found it in sammobile
Click to expand...
Click to collapse
Those codes are for GB right? What codes for Froyo to download?
erik8xda said:
Those codes are for GB right? What codes for Froyo to download?
Click to expand...
Click to collapse
You can try this:
JLC, JLD, KA9, KB1, KC1 from Russia
...I'm not sure if they are full package, anyway you can try donwloading it
Viper The Ripper said:
You can try this:
JLC, JLD, KA9, KB1, KC1 from Russia
...I'm not sure if they are full package, anyway you can try donwloading it
Click to expand...
Click to collapse
I tried USB Jig and it doesn't work. What should I do now?
Bump.