[Q] Kernel and ROM problem - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hey!
I've flashed kernel and firmware on my Note successfully several times, but now I encountered a problem:
I'm on Asylum_CM10.1_20130311_n7000 ROM and was using Asylum_CM10.1_20130311_n7000 kernel, all working fine.
Then I flashed a new kernel, HydraCoreNirvana Kernel for Galaxy Note GT-N7000. After this I've been in hell, every time I try to start/boot the phone, it jams on the Asylum startup animation. I tried both from the SD and when the phone wouldn't start, via Odin. Then I tried flashing back to the working kernel above, no help. Now I'm stuck with two non-working kernels and a useless phone. I hope I haven't ruined it already...
I was flashing with the instructions @ rootgalaxynote. com
Any help would be greatly appreciated!
-Larson

larson80 said:
Hey!
I've flashed kernel and firmware on my Note successfully several times, but now I encountered a problem:
I'm on Asylum_CM10.1_20130311_n7000 ROM and was using Asylum_CM10.1_20130311_n7000 kernel, all working fine.
Then I flashed a new kernel, HydraCoreNirvana Kernel for Galaxy Note GT-N7000. After this I've been in hell, every time I try to start/boot the phone, it jams on the Asylum startup animation. I tried both from the SD and when the phone wouldn't start, via Odin. Then I tried flashing back to the working kernel above, no help. Now I'm stuck with two non-working kernels and a useless phone. I hope I haven't ruined it already...
I was flashing with the instructions @ rootgalaxynote. com
Any help would be greatly appreciated!
-Larson
Click to expand...
Click to collapse
Please, I'm drunk and freaking out with this phone (I know 1st world problems).

Do a wipe data in recovery (if u can go to) or ODIN. Then try to see if the phone boots, if it doesn't you can do a clean install of Asylum ROM again. If nothing works(!) Go back to flash a stock ROM via ODIN and then use Philz kernel to re-root.

Varad297 said:
Do a wipe data in recovery (if u can go to) or ODIN. Then try to see if the phone boots, if it doesn't you can do a clean install of Asylum ROM again. If nothing works(!) Go back to flash a stock ROM via ODIN and then use Philz kernel to re-root.
Click to expand...
Click to collapse
Tried all that (went straight to stock). No help, I guess somethings gone wrong with the boot sequence, I flashed Philz kernel and now it loops on the samsung animation. Before, it sometimes showed "Android is upgrading 1/83 (or something similar), the number would go up a while, then the start-up animation again and all over again from 1/83. It always seems to jam on the ****ing animation... Gonna jump off the roof.

larson80 said:
Tried all that (went straight to stock). No help, I guess somethings gone wrong with the boot sequence, I flashed Philz kernel and now it loops on the samsung animation. Before, it sometimes showed "Android is upgrading 1/83 (or something similar), the number would go up a while, then the start-up animation again and all over again from 1/83. It always seems to jam on the ****ing animation... Gonna jump off the roof.
Click to expand...
Click to collapse
I got the phone working again. Did a factory reset from recovery and after that the phone started up. After that installed the HydraCoreNirvana Kernel again and now it works just fine. Thanks very much for the help!

Related

Boot Loop after flashing stock

I was recently using Stunner ICS but decided I wanted to go back to stock and start over. I downloaded the stock N7000XXKJ4_N7000OXXKJ4 firmware and installed it through odin. I did not receive any errors on the phone or on my PC. But now it seems like my phone is stuck in a boot loop. It just keeps showing the samsung boot animation over and over. I used the download jig to get into download mode and tried redoing the firmware twice already with no luck. One thing I did notice is that the jig is no longer resetting the binary counter. Does anyone have any other ideas or is my phone possibly bricked?
This is supposed to be in Q& A section... Anyways... Did you try wipe?
Sent from my GT-N7000 using xda premium
What worked for me having the same problem recently is go to Recovery mode (Volume up + home + power) and you'll see this funny kinda recovery, not at all CWM Do a data wipe/factory reset and then reboot.
Same thing happened with me yesterday, wipe in recovery fixed the problem
priyanv said:
This is supposed to be in Q& A section... Anyways... Did you try wipe?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I'm sorry. Mods please move to appropirate section.
Thank you guys. I was beginning to freak out. I was trying to do the recovery menu but couldn't get it to work. I thought the recovery menu was also hosed but I had the wrong buttons. All is good now! thank you so much!
First thing you need to do if you want to get back GB, flash abyss 3.9 redpill kernel.
After that flash GB rom.
So later you can flash whatever kernel you want
Sent from my GT-N7000 using xda premium
Hanging at Samsung logo; can't boot into recovery; am I bricked???
Hi guys...
I've been semi bricked for about 18 hours now. And it's starting to look like it's a full-brick.
I had the latest Gingerbread ROCKET ROM on my Samsung Galaxy Note GT-N7000, with the latest Franco kernel in place.
I thought I'd give the ICS version of ROCKET ROM a go. Flashed Abyss4.2 kernel without any hassles. Used 'advanced' to boot into recovery. Did my various wipes. Flashed the ICS Rocket Rom zip. And got caught up in the recurring boot-up, mostly upgrade, run, reboot cycle that's been described in many places.
Didn't panic.
Booted into recovery again, and flashed the ICS Rocket Rom again.
But this time, it wouldn't go past the SAMSUNG logo.
Still, I could boot into recovery.
Which I did.
And I tried to restore my Gingerbread build from Nandroid.
Tried it. But it hung on the Samsung logo again.
With one key difference... Now, no matter how much I try, I can't boot into recovery.
I *CAN* boot into 'download' mode. So I've used PC Odin to try and inject a rooted Gingerbread rom into the phone.
The instructions tell me to wait for the phone to reboot twice. Sadly, it tries its first reboot, and doesn't get past the Samsung logo. And that's where it hangs. No recovery mode either.
What shall I do??? Oh, woe is me. Etcetera.
--------------------------------------------------------
UPDATE
--------------------------------------------------------
I found a version of Abyss 4.2 kernel in tar format. I flashed it via PC ODIN, and I now seem to have a phone that can boot again.
Not much more to report at the moment, cos the battery is on about 3%, so I'm charging it now before delving further. Will give more feedback once the battery's up and running again.
Here's a link to the Abyss file: http://forum.xda-developers.com/attachment.php?attachmentid=1072122&d=1337500067
I tried all of this, was on stock ICS 4.0.3 and had it rooted.
I tried to restore a backup which was sadly on GB and then the restore of /data failed
I then tried to flash paranoid custom rom and it was successful but the phone never went any further than SAMSUNG GALAXY NOTE GT-N7000 logo
I then Flashed a direct rootable stock rom via PC odin and all was well but the phone would never go any further than the logo before mentioned
I tried flashing AbyssNote kernel via pc odin but the CWM recovery menu kept on rebooting hence leaving me with not particular choice to select
Tried wiping data, cache mem, dalvik cache but no use and now i am on stock recovery menu. please help me out
i have this Samsung i9220 china i try to flash upgrade the firmware with Odin3 v1.85 . i got stock phone can't power non recover modem non booting logo , does anyone have any ideas ?

[Q] Bootloop when trying to flash ICS rom.

So first i'll explain whats the problem.
I went from Slim ICS to stock android 2.3.5 XXJVT. After that I flashed the rooted kernel via Odin, including CWM.
So I got to the recovery and wiped everything and flashed the a cm9 nightly, this was in the instructions SlimICS If coming from stock GB. While installing it stopped after a few seconds and rebooted to recovery where a few lines came up amd rebooted again, alot of red letters flashed between the reboots and it kept rebooting.
I have tried other roms with a similar result:
-After install, comes to kernel loading screen reboots straight into recovery.
-Tried infinitum, succesfully installed actually started OS but got an error acreen in android itself, saying something about encryption or something (forgot it).
I know this is a long story but i've been trying to flash ics again for a lot of hours with a lot of fixes but nothing succesfull.
I hope you guys know more then me. If you need more info please ask, im pretty issed of by phone right now.
Thanks
On I9000
Pull out the battery.put back in.go to recovery and flash again.reboot.
It's does this because u need to be on an ics kernel for it to flash the rom properly.it's perfectly normal.don't worry
It only happens when upgrading the os or flashing cm9 the FIRST time
zodiaxe66 said:
Pull out the battery.put back in.go to recovery and flash again.reboot.
It's does this because u need to be on an ics kernel for it to flash the rom properly.it's perfectly normal.don't worry
It only happens when upgrading the os or flashing cm9 the FIRST time
Click to expand...
Click to collapse
Thanks! I'll try and see what it does. I'll let you know
Take a look here:
http://forum.xda-developers.com/showthread.php?t=1627689
ZioGTS said:
Take a look here:
http://forum.xda-developers.com/showthread.php?t=1627689
Click to expand...
Click to collapse
And how would this help non devs and noobs?????????????
If u have no intention of helping why post

[Q] N7000 boots but stacks at home screen on every rom i try

I was on MidTeam 1.3. i decided to change my lcd density via an app and this messed up everything. i went to CWM and do a wipe/factory reset. After this the system failed. I flashed a GB rom via Heimdall, everything went well, the phone booted as usually, i've seen the "click android to start" screen but when i clicked on it phone freezed. I tried to flash different ROMs both customs and stocks, they are all being flashed via heimdall succesfully but stacked at the same place. I finally flashed CM9 (again via heimdall). It booted normally, i saw the lock screen, i unlocked it by touching the screen then the phone freezed again. I made a search on the forum but did not find a similar case. Can anybody help? CWM is working fine, i can do wipe/factory reset or mount any partition.
jayaka said:
I was on MidTeam 1.3. i decided to change my lcd density via an app and this messed up everything. i went to CWM and do a wipe/factory reset. After this the system failed. I flashed a GB rom via Heimdall, everything went well, the phone booted as usually, i've seen the "click android to start" screen but when i clicked on it phone freezed. I tried to flash different ROMs both customs and stocks, they are all being flashed via heimdall succesfully but stacked at the same place. I finally flashed CM9 (again via heimdall). It booted normally, i saw the lock screen, i unlocked it by touching the screen then the phone freezed again. I made a search on the forum but did not find a similar case. Can anybody help? CWM is working fine, i can do wipe/factory reset or mount any partition.
Click to expand...
Click to collapse
see if anything in my signature can help you... good luck!!!
Thank you for the answer. I've succesfully flashed LPY rom from the list you provided the phone restarted, boot animation is ok, then the phone stacked at samsung logo. I've waited like 45 min but nothing has changed. I gave a try with a gingerbread rom but the odin process was freezed during datafs. I'll try another GB and if same thing happens, will try LPY of LPF once again.
jayaka said:
Thank you for the answer. I've succesfully flashed LPY rom from the list you provided the phone restarted, boot animation is ok, then the phone stacked at samsung logo. I've waited like 45 min but nothing has changed. I gave a try with a gingerbread rom but the odin process was freezed during datafs. I'll try another GB and if same thing happens, will try LPY of LPF once again.
Click to expand...
Click to collapse
It looks like you have got a Superbrick on your hands, mate.
It looks so, but as the phone opens both in download and recovery mode and stock lpy rom can be flashed, i still keep the hope for a possible miracle :/
Happy End
After trying hundreds way, my galaxy note is working now.
every rom i try to flash via Odin had some issues. LPY was flashed with succes but stack at boot.
LPF was not able to write DataFS
but i was able to enter CWM. So i flashed abbys kernel. Then i realised that wipe/data factory reset was working.
I formated /data and /system
then i mounted /data
reboot in recovery
again i mounted/data and then flash darky's rom. Everything looks running properly now.
Never ever i'll try a lpy rom
dont try LPF and LPY roms for now..
dont know why they kept making roms for it despite the constant warning... i guess a lot of people love the thrill of bricking expensive things.. lol..

Help, phone only booting to recovery

Hi I was running Helly Bean and I was experiencing some lag that i couldnt fix so i decided it was time to start fresh (phone was getting to be a mess anyways) so i formatted my phone and one-click to a stock rom. (rogers i896 2.3.3 with bootloader). I used heimdell to flash kernel with recovery, then flashed devil kernel, reboot recovery, then flashed helly bean as per thread instruction and my phone kept booting into recovery only. So i tried to start over 2 more times with the same results, I even tried to flash CM9 stable release and it yielded the same results.
Can anyone shed some light as to what i messed up? My only option now is to use stock app since i cant seem to get anything else to work...(pleas dont make me go back to touchwiz)
Any help is appreciated,
Thanks.
PS phone works fine on stock rom
This happened to me once... I think it has to do with repartitioning and Devil kernel. If you flash devil first, it seems that something is telling the CM installer that the partitions are all good to go, even though it is clearly not the case. So use heimdall to flash the first kernel, and go straight to the ROM install, making sure to flash the ROM a second time after it reboots into the new recovery.
korockinout13 said:
This happened to me once... I think it has to do with repartitioning and Devil kernel. If you flash devil first, it seems that something is telling the CM installer that the partitions are all good to go, even though it is clearly not the case. So use heimdall to flash the first kernel, and go straight to the ROM install, making sure to flash the ROM a second time after it reboots into the new recovery.
Click to expand...
Click to collapse
Thanks, works first time!!! Looks like im going to have IMEI problems but thats another battle lol
odin to stock 2.3.6, charge to 100%, then go to recovery, 4w, 2f, then install helly bean.
just went thru this last week.... accidentally flashed incorrect ROM to Captivate and phone started acting wiered.
Then came to know i have the wrong bootloaders and kernel. Just installed GB bootloaders and phone started booting to recovery.
then tried to flash ics rom and soft bricked my phone.
Used the "hold both volume buttons and plugin the USB cable to computer" to get into download. then ODIN to stock GB. then used KKroot and then flashed Slim ICS. Now the phone works great.

Help!! GNOTE stuck at samsung BOOT screen after repartitioning because of hard brick

guys a had some really bad time running into this faulty ICS ROM and den by fault bricking it.
then after searching for hours i found this post by forest1971 here http://forum.xda-developers.com/showthread.php?p=26285877for unbricking GNOTE by repatitioning the internal sdcard after finding faulty bricked blocks.
as i could not reboot into recovery.
so i used one of the PIT files provided in his post and flashed it via PC ODIN to revive my bricked GNOTE.
later i was able to get into recovery.
then i thought of flashing STOCK jelly bean DDLSC 4.1.2 ROM and i was able to flash it easily via PC ODIN.
then i phone rebooted and got stuck on samsung jelly bean BOOT screen.
i waited for hours for it to start(pass that boot screen) but all in vain.
SO now i ma stuck at the BOOT screen so can any1 please help me and tell me what to do now??
first try flash safe kernel, use philz kernel, flash it from recovery(.zip) or pc odin(.tar) reboot recovery, and make full wipe..reboot your phone..
if still stuck on bootloop.
maybe TW Rom is to big for you now, try flash Slim Bean
Just make sure you have safe kernel+cwm first.
zai89 said:
first try flash safe kernel, use philz kernel, flash it from recovery(.zip) or pc odin(.tar) reboot recovery, and make full wipe..reboot your phone..
if still stuck on bootloop.
maybe TW Rom is to big for you now, try flash Slim Bean
Just make sure you have safe kernel+cwm first.
Click to expand...
Click to collapse
first of all thanks for replying that fast..
and second thing is that i am not in a bootloop instead my phones just stuck at the samsung BOOT screen.
somehow if i keep rebooting again and again i get to pass that BOOT screen but then my phone would get stuck at "android is upgrading" screen or it pass that too then it would freeze at those startup wizard configuration mostly at the wifi page.
Also i did try to install paranoid 3.15 and had the same result (stuck at bOOT screen) so i think i mean i think (not much of an expert in this kind of stuff) the size is not a problem.
and also i have flashed this safe PHILZ kernel for DDLSC which i am using now.
prince4p91 said:
first of all thanks for replying that fast..
and second thing is that i am not in a bootloop instead my phones just stuck at the samsung BOOT screen.
somehow if i keep rebooting again and again i get to pass that BOOT screen but then my phone would get stuck at "android is upgrading" screen or it pass that too then it would freeze at those startup wizard configuration mostly at the wifi page.
Also i did try to install paranoid 3.15 and had the same result (stuck at bOOT screen) so i think i mean i think (not much of an expert in this kind of stuff) the size is not a problem.
and also i have flashed this safe PHILZ kernel for DDLSC which i am using now.
Click to expand...
Click to collapse
reboot in download mode if you can and use pc odin to flash the ASOP ROM like supernexus 2.0 http://forum.xda-developers.com/showthread.php?t=2076697
this may resolve the issue.
Mayank Chandwani said:
reboot in download mode if you can and use pc odin to flash the ASOP ROM like supernexus 2.0 http://forum.xda-developers.com/showthread.php?t=2076697
this may resolve the issue.
Click to expand...
Click to collapse
yes i can reboot into download mode.
but the thing is that i have flashed this stock DDLSC ROM and i was able to make it run by rebooting system 3-4 times
but later on it would freeze after like 10-20 seconds and then i have to reboot the system again and
the ROM will start but again freezes within 10-20 seconds of startup.
so please help me to get rid of dese freezes.
PS- ill try flashing this supernexus 2 ROM lets see what happens

Categories

Resources