Related
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Daneshm90 said:
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Click to expand...
Click to collapse
Yes..."SAMSUNG USB composite Device" comes up with an error. Device status shows, "This deveice cannot start. (Code 10)"
Nexus S Drivers?
Maybe u can try with Nexus S Drivers.
U can donwload from developer.android.com/sdk/win-usb.html
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
hamsterkiller said:
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
Click to expand...
Click to collapse
This did it! Thanks.
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
do you have the kies drivers installed? and is kies not running (inc. shut down tray agent?
try another usb port, that was a problem I had, Odin is picky with good or bad usb ports...
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=961956
Sent from my GT-I9000 using XDA App
SamHaLeKe:
So i tried this, but it doesnt help. I still have in device manager something wrong.
When I'm trying Update Driver Software, windows cant found right driver...
Is it possible, that I something f*ct up at last flash? Before it everything works fine. When I flashed first time, i forgot the *.pit file - odin wrote "failed" - I tried it again, but correctly - everything was ok - I fashed kernel - after that in CMW I Instaled *.zip file with Juwe's ROM 4.3.1 and my phone reboot in landscape mode... and i cant change it to normal mode.
I tried factory reset from phone - there are some red lines with this: tsf format failed on dev/block/mmcblk0p2, but when i go to CWM mode through (volUP+home button+on/of button) and i did a factory reset there - is it without red lines. Somebody ask me if i tried reflash - so i am here with my "driver problem"
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
toxic1 said:
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
Click to expand...
Click to collapse
Noooooo, not reinstall that bloath ware, just the NEW drivers!
Sent from my GT-I9000 using XDA App
lol ok then just drivers then
I know this may sound dumb, but make sure you are using a compatible cable.. i.e. does data transfer, I bough a replacment cable months ago for my damaged one under the impression it did data because I could connect and transfer to USB (I know this is data)... but kies would not recognize the phone.. I ended up buying a real replacement. Problem solved.
I think, that my biggest problem is cannot connect to kies and odin...
i am in the end... so cabel is the same, i used it when i flashed befor - as i said my problem is in phone, not in drivers or cabels. Is here something to do flash without this drivers?
can you confirm there is no issue with your USB ports on your computer? just seems odd it wont recognize your phone in download mode... you are placing it in download mode when using odin right?
I just did a flash with mine to a stock rom,
Same problem, I can get to DL mode, but it does not recognize,
When I am in the standard Tab OS, with USB as mass storage, I can see if fine.
Odd how it just happened as well. I'd like to follow this thread see where it goes.
*edit reinstalling drivers does not resolve the issue,
- have not tried installing keis again yet though,
- also Odin recognizes it in Recovery Mode
*edit again - sorry guys, didnt realize i was in the i9000 forum, hit this on a google search and replied
I can go to the download mode throught 3-buttons combo - but odin recognize my phone - the same thing is in kies - it's vicious circle - i hope flash help me - but I cant do it, because i cant connect to odin
Unfortunatly I am out of help... I thin kyou may need someone who knows ADB and the phones system internals if ODIn won't recognize your phone in Donload mode... I have had my phone in several bad situations(Fried internalsd/bootloaders) but download mode would always connect me to ODIN..
Last try, try different versions of odin, 1.3 - 1.8 apparently it can be testy with different versions of windows.
Try the drivers & Odin 1.83 from my signature. Works all the time.
USB not recognized even using Samsung, Nexus new drivers...CWM stills working but unable to complete ny operation! (no progress during restore)..... Any HELP ?!?!
Does your phone get recognized in download mode?
NO
bucksaway said:
Does your phone get recognized in download mode?
Click to expand...
Click to collapse
No...when connecting the SGS into Dowlad Mode and then USB, the Windows Error advice appears...
It doesn`t happen when I connect the phone during the bootloop
Have you tried multiple PC's or just the one? A different USB cord? Have you removed kies and deleted the "sys info" folder, rebooted, then installed just the Samsung driver?
trying...
bucksaway said:
Have you tried multiple PC's or just the one? A different USB cord? Have you removed kies and deleted the "sys info" folder, rebooted, then installed just the Samsung driver?
Click to expand...
Click to collapse
I`ve tried different PC, and nothing...now I`ll try different cord...but is there anything related with the storage/ mount? does win7 recognize EXT4 devices?
kairos005 said:
I`ve tried different PC, and nothing...now I`ll try different cord...but is there anything related with the storage/ mount? does win7 recognize EXT4 devices?
Click to expand...
Click to collapse
Windows 7 recognizes EXT4 so that's not the issue, otherwise everyone who flashes roms and plays with their phone would have the same issue.
Try the cord, apart from that if you can't get any PC to recognize it in download mode it may be hardware related.
Not yet
bucksaway said:
Windows 7 recognizes EXT4 so that's not the issue, otherwise everyone who flashes roms and plays with their phone would have the same issue.
Try the cord, apart from that if you can't get any PC to recognize it in download mode it may be hardware related.
Click to expand...
Click to collapse
I tried another USB cord...nothing again...Win7 USB not recognize still appearing...
How do you access download and recovery modes, through 3 button combos or electric jig?
3 buttons still working
3 buttons function still working...but, I supose that something is not allowing the Win7 recognize it...yesterday I tried in a Win XP and nothing happens too...5 min ago I tried do this in another win7 PC...same erros
kairos005 said:
yesterday I tried in a Win XP and nothing happens too
Click to expand...
Click to collapse
What do you mean? It worked or didn't work on xp?
didn`t work
bucksaway said:
What do you mean? It worked or didn't work on xp?
Click to expand...
Click to collapse
it didn`t work yesterday when I tried in a XP windows...I guess that the problem isn`t with Drivers, cause any PC is recognizing it...
The problem presented at CWM is the same that the other thread at this page.
kairos005 said:
3 buttons function still working...but, I supose that something is not allowing the Win7 recognize it...yesterday I tried in a Win XP and nothing happens too...5 min ago I tried do this in another win7 PC...same erros
Click to expand...
Click to collapse
kairos005 said:
it didn`t work yesterday when I tried in a XP windows...I guess that the problem isn`t with Drivers, cause any PC is recognizing it...
The problem presented at CWM is the same that the other thread at this page.
Click to expand...
Click to collapse
I'm having trouble understanding your posts. From what I can gather we have eliminated a driver, PC or cord issue. Why do you think it is CWM issue when the phone is not even recognized in download mode?
bucksaway said:
I'm having trouble understanding your posts. From what I can gather we have eliminated a driver, PC or cord issue. Why do you think it is CWM issue when the phone is not even recognized in download mode?
Click to expand...
Click to collapse
I have tried reinstall Samsung Driver, no sucess...
I have used a different USB cord, no sucess...
I have tried using another PC and nothing!
The 3 Buttons options still working even for CWM (then I can`t do anything cause the unknow mount/ storage problem)....and in Download Mode the WIn7 Doesn`t Recognize it.
I hope you understand me...sorry about my English!
CWM Unable to Delete files
I continue in trouble...my SGS isn`t working, the CWM mode can`t wipe, delete or install anything...always the "E: unknow mount"
The Download Mode still not working!
What were you doing when this issue started?
I was restoring
I was trying to restore the update.zip file...I was using the MyICS and later the ICS RC4.2 ...but I`ve decided to return to the stock, wipe data/ factory reset and then: no more boot (only i9000 appears and stay)
HI, I`m using a program USBDeview and it can "see" my device although it doesn`t recognize as a SGS or i9000 or anything related.
I`ve been reading something related to ADB and PDAnet, but everytime that someone says to put my device in Debugging mode ON and continue the steps, I have to stop cause I can`t turn ON my SGS...I suppose that before the last time I used it I let the debugging MODE OFF...so my PC and any other PC will recognize it.
Any other idea/ solution?
Thanks a lot...but I still don`t have a phone,
I`ve been trying to solve my problem but no succes until now!
HI, I`m using a program USBDeview and it can "see" my device although it doesn`t recognize as a SGS or i9000 or anything related.
I`ve been reading something related to ADB and PDAnet, but everytime that someone says to put my device in Debugging mode ON and continue the steps, I have to stop cause I can`t turn ON my SGS...I suppose that before the last time I used it I let the debugging MODE OFF...so my PC and any other PC will recognize it.
Any other idea/ solution?
I still have the CWM 3.0 issue (not abble to install/ restore/ apply zip...anything caude it doesn`t acces to storage/ mount)
I still have to DOwnload Mode, but unabble to the FLASH ANYTHING by Odin.
Thanks a lot...but I still don`t have a phone,
What happens when you open Odin and then plug it in in download mode?
Have you tried to mount or unmount storage in CWM?
If you can't wipe anything through CWM and can't get any PC to recognize it in download mode unfortunately it sounds like you have either bricked your phone or you have hardware issues.
You've probably tried it, but, pull your battery out for a minute and then try everything again, apart from that there's nothing else I can help you with. Maybe start searching for tricks on how to unbrick an sgs.
Good luck mate and keep me posted on your progress, I'll help where I can.
mount not succesfull
bucksaway said:
What happens when you open Odin and then plug it in in download mode?
Have you tried to mount or unmount storage in CWM?
If you can't wipe anything through CWM and can't get any PC to recognize it in download mode unfortunately it sounds like you have either bricked your phone or you have hardware issues.
You've probably tried it, but, pull your battery out for a minute and then try everything again, apart from that there's nothing else I can help you with. Maybe start searching for tricks on how to unbrick an sgs.
Good luck mate and keep me posted on your progress, I'll help where I can.
Click to expand...
Click to collapse
Yes, I've tried to mount or unmount, but the process doesn't end...cause the E: unkonow problems
The battery trick I've tried too.
I apologize if thread is already posted.
I tried to flash my i9001 to stock firmware but ODIN won't recognize my device. Actually my widows XP machine won't recognize it either.
Tried with different machine and reinstalled drivers and still nothing.
I have installed CWM recovery mode and phone is rooted.
Any suggestions how to flash it to stock firmware ?
Thanks in advance
getmeister said:
I apologize if thread is already posted.
I tried to flash my i9001 to stock firmware but ODIN won't recognize my device. Actually my widows XP machine won't recognize it either.
Tried with different machine and reinstalled drivers and still nothing.
I have installed CWM recovery mode and phone is rooted.
Any suggestions how to flash it to stock firmware ?
Thanks in advance
Click to expand...
Click to collapse
Check step by step to resolve your problem http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
xsenman said:
Check step by step to resolve your problem http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Sorry, but I forgot to mention that ac power adapter won't charge the phone also ... only when SGS+ is turned off ?!
getmeister said:
Sorry, but I forgot to mention that ac power adapter won't charge the phone also ... only when SGS+ is turned off ?!
Click to expand...
Click to collapse
can you explain what you mean by "only when SGS+ is turned off ?!"
can you charge by USB Cable?
xsenman said:
can you explain what you mean by "only when SGS+ is turned off ?!"
can you charge by USB Cable?
Click to expand...
Click to collapse
sometimes it does someties it doesn't ... odd isn't it
but still not recognized with winXP.
getmeister said:
sometimes it does someties it doesn't ... odd isn't it
but still not recognized with winXP.
Click to expand...
Click to collapse
Clean your contacts with alcohol and brush and try to use a on a different USB slot at back of PC
Did you try the solutions on the link, I posted?
xsenman said:
Clean your contacts with alcohol and brush and try to use a on a different USB slot at back of PC
Did you try the solutions on the link, I posted?
Click to expand...
Click to collapse
Tried on two win XP machines, and win 7 notebook. I really don't think there is a problem with machines
getmeister said:
Tried on two win XP machines, and win 7 notebook. I really don't think there is a problem with machines
Click to expand...
Click to collapse
Its not only about the machines, its also about the USB cable and USB slot, you need to isolate the problem by way of elimination....get a hold of another original samsung USB Cable to isolate that is not the cause and than examine your Phone USB slot for damage/mislaigned pins ...you can try moving the usb plug to see, if connection is being established
xsenman said:
Its not only about the machines, its also about the USB cable and USB slot, you need to isolate the problem by way of elimination....get a hold of another original samsung USB Cable to isolate that is not the cause and than examine your Phone USB slot for damage/mislaigned pins ...you can try moving the usb plug to see, if connection is being established
Click to expand...
Click to collapse
considering the cables ... got one from Samsung and other from Nokia, also ac power adapter is yet another so we eliminated the possibility of broken cables .
Still day after I sucessfully installed CWM recovery mode with ODIN.
So I suspect a problem with firmware
getmeister said:
considering the cables ... got one from Samsung and other from Nokia, also ac power adapter is yet another so we eliminated the possibility of broken cables .
Still day after I sucessfully installed CWM recovery mode with ODIN.
So I suspect a problem with firmware
Click to expand...
Click to collapse
Nokia Cables are not compatible with Samsung Phones and for ICS, its best to use Samsung Nexus drivers or ICS drivers
xsenman said:
Nokia Cables are not compatible with Samsung Phones and for ICS, its best to use Samsung Nexus drivers or ICS drivers
Click to expand...
Click to collapse
I got myself a new cable, installed Nexus drivers .... and gues what ....
SGS+ is charging but message is still there "USB device not recognized" ....
Do you have something else in mind ?
getmeister said:
I got myself a new cable, installed Nexus drivers .... and gues what ....
SGS+ is charging but message is still there "USB device not recognized" ....
Do you have something else in mind ?
Click to expand...
Click to collapse
Assuming you did not just buy any compatible cable, much to my regret, I myself have bought and found unusable .
and you have tried the Quick Guide
If phone is not being detected of a sudden (Quick Guide)
1. Reboot PC after a power cord pull and Reboot Phone after a Battery Pull , try USB connection
2. Try using a different Samsung USB cable (must be sumsung and nothing else)
3. Try a different USB port (use USB slots at the back of PC)
4. Try on a lap top or different PC
5. Try install nexus drivers - needed for ICS firmwares
6. Make sure you don't have fast charge on.
Trick : Putting your Phone into download mode and connecting it with USB cable to PC will do it automatically. Meaning drivers will be installed by windows If there are none.
Frankly, these works for me all the time, so I am a bit clueless as to why you are unable to. I mean losing USB connection is pretty common, happens every now and than.
You should also try switching off WIFI , reboot the phone, reboot the PC, start Odin and than plug in the phone ( this worked for some)
Since the USB is trying to connect but not recognized as to what it is, you should try again, this time using device manger as mentioned here http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
thats all I can think of
Finaly solved my problem!
Thanks!
Nothing helped, thank you for your effort.
Is there any way to flash to stock firmware other than ODIN ?
getmeister said:
Nothing helped, thank you for your effort.
Is there any way to flash to stock firmware other than ODIN ?
Click to expand...
Click to collapse
use MObile ODIN
xsenman said:
use MObile ODIN
Click to expand...
Click to collapse
Tried that too... "Device unsupported ....
change the cable if that dosnt helps try on windows 7 machine cuz once i flashed jw4 on ma windoes xp n d usb connection timed out n i ended with soft brick but got lucky that i could re enter download mode n i flashed jw4 again but in windown 7 machine happy flashing
YOMAN18 said:
change the cable if that dosnt helps try on windows 7 machine cuz once i flashed jw4 on ma windoes xp n d usb connection timed out n i ended with soft brick but got lucky that i could re enter download mode n i flashed jw4 again but in windown 7 machine happy flashing
Click to expand...
Click to collapse
tried with 2 WinXP machines , one Win7 and even Ubuntu 12.04 LTS
no luck
getmeister, you can not solve this problem? I also ran into her niznayu what to do, I know that never in my life do not put anything on this board if you solved the problem of how to write please [email protected]
If nothing works, then its most probably your mobile usb port.
Get it Samsung repair!
Sent from my GT-I9001 using xda app-developers app
Hello, so as the title say i have a usb brick, wich means my phone can't get detected by pc ( tested on win7 / win8 / xubuntu ) with different drivers and different cable.
i looked over the form for the problem but no one seems to found a solution, i'm posting this to check if someone has resolved it before ?
my main problem is that i can't get odin to detect the phone, i can't flash any stock now !! :/
anyway please give it a taught, changing Drivers , desinstall and reinstalling drivers doesn't work and i don't have any warranty on the phone.
thanks in advance for your help
Cominox said:
Hello, so as the title say i have a usb brick, wich means my phone can't get detected by pc ( tested on win7 / win8 / xubuntu ) with different drivers and different cable.
i looked over the form for the problem but no one seems to found a solution, i'm posting this to check if someone has resolved it before ?
my main problem is that i can't get odin to detect the phone, i can't flash any stock now !! :/
anyway please give it a taught, changing Drivers , desinstall and reinstalling drivers doesn't work and i don't have any warranty on the phone.
thanks in advance for your help
Click to expand...
Click to collapse
Have you tried enabling usb debugging on the device?
I take it that it does charge right?
Sent from my GT-N7000 using xda app-developers app
Anthropostar said:
Have you tried enabling usb debugging on the device?
I take it that it does charge right?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yes i tried with usb debugging on/off and nothing, the cables charge the phone but doesn't get it to be detected
Not even detected in recovery? Have you tried recovery - mounts & storage - mount USB storage connected to PC?
Could be possible that the use port is broken or you need to change rom to get it working.
What rom are you on right now? If you are rooted, then use mobile odin to flash any stock rom. It also goes without saying that you will need a sd card in this case to transfer files on to the phone.
nokiamodeln91 said:
Not even detected in recovery? Have you tried recovery - mounts & storage - mount USB storage connected to PC?
Could be possible that the use port is broken or you need to change rom to get it working.
What rom are you on right now? If you are rooted, then use mobile odin to flash any stock rom. It also goes without saying that you will need a sd card in this case to transfer files on to the phone.
Click to expand...
Click to collapse
i was using angry ROM v3.2 and now i tried Xperia Note, same problem and thanks for the advice about mobile odin that can be usefull when needed but i just need to figure out the solution for this brick the phone isn't detected on any pc that i used not even on CWM mount and storage
Try another wire?
Tapatalking on my n7000
Hello there,
I am Belgian so i'm gonna try to do my best to find my english somewhere
I have a samsung galaxy s3 mini gt-i8190..
I have tried to flash with odin thru pda BUT it stopped with fail as result..
Then i have tried to put original firmware back the same way but fail again,
then tried again with same original firmware and succeeded..
Phone froze at samsung logo, tried again and now i got the message "firmware upgrade encountered an issue. please select recovery mode in Kies & try again."
Ok, so i plug the phone back in the usb cable: Device Not Recognized! (windows 7 ultimate laptop).
I can get in to download mode: still not recognized via usb.
recovery mode DOESN'T work at all (3 button combo) just the error message at the normal boot and the download mode.
So basically i can't flash cause i can't connect, reinstalled drivers, used another pc, same thing...
It doesn't even charge the phone..
Odin mode says:
Product name: GT-I8190
Custom Binary Download: YES (4 counts)
Current binary: Custom
System status: Official
So does there somehow any file exists to put on my sd card to access usb OR a file to go into recovery mode.
Any tip is welcome, will try them all..
Thanks by advance,
yoni089
Have you tried installing Samsung's USB Driver? I know installing kies comes with the USB drivers but just in case. You might want to check if it's properly installed in your computer. Try reseting your counter first with Triangle Away. Please tell me more of what you did.
Click on the thanks button if I helped!
Change usb port and make sure all processes with kies are killed in taskmanager.
Open Odin. Put the phone in download mode and connect usb.
Hello,
Thanks for the reply's
I did install Odin first, when i flashed my phone it failed..
So i decided to install kies to make sure i had the right drivers,
Uninstalled Kies without the drivers. The phone was still recognized back then!!
Flashed it again and again FAIL!
Since then NOTHING works with the usb connection, windows does not recognize my phone "unknown device".
So it doesnt even know what it is..
Uninstalled the drivers and reinstalled them, rebooted my laptop with battery out for a minute but nothing works..
Also i tried to connect to another pc but no luck..
So i guess the key on my phone for the driver to find is missing/deleted by flashing and failing..
That's why i asked if there is any file to putt on my sd card to be recognized by my computer.
I did tried many times using another usb port..
Also tried with and without sim card/ sd card.
(btw: does they have to be in there anyway?)
Thnx and grtz,
Yoni089
please post where odin fail?
samersh72 said:
please post where odin fail?
Click to expand...
Click to collapse
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
yoni089 said:
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
Click to expand...
Click to collapse
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
SethCode'z said:
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
Click to expand...
Click to collapse
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
yoni089 said:
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
Click to expand...
Click to collapse
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
SethCode'z said:
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
Click to expand...
Click to collapse
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
yoni089 said:
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
Click to expand...
Click to collapse
Did your three button combination work for recovery mode before this happened?
tys0n said:
Did your three button combination work for recovery mode before this happened?
Click to expand...
Click to collapse
I have no idea, i never needed it before..
yoni089 said:
I have no idea, i never needed it before..
Click to expand...
Click to collapse
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
tys0n said:
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
Click to expand...
Click to collapse
It just turns on to the triangle that says there is an issue with the firmware upgrade..
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
Do provide the odin log, probably corrupted PIT ?
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
linux is your answer it never fails
Sent from my Vodafone Smart II using xda premium
AssToast said:
Do provide the odin log, probably corrupted PIT ?
Click to expand...
Click to collapse
How do i get that log?
tys0n said:
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
Click to expand...
Click to collapse
no it doesn't, not even my laptop does..
yoni089 said:
How do i get that log?
no it doesn't, not even my laptop does..
Click to expand...
Click to collapse
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
nuotal you
tys0n said:
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
Click to expand...
Click to collapse
I did it all
Yes it was the original usb cable..