Hello,
I install AOKP Rom fron Maclaw and my Problem is i have no Mobile Data and i Restore my Old Rom and i dont know why but no Mobile Data....Reinstall everything but nothing help... look at screen in midle so looks like everytime Help me pls fast!
Thanks!
Hi Kenneth sorry for the lack of help ..
Have you tried flashing back to official stock ROM using Odin and doing a full factory reset? You'll lose all data but it will most likely fix your problem..
Sent from my GT-I8190 using Tapatalk 2
iKlutz said:
Hi Kenneth sorry for the lack of help ..
Have you tried flashing back to official stock ROM using Odin and doing a full factory reset? You'll lose all data but it will most likely fix your problem..
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
I dont know more but i try again Flash Stock via Odin and then back to AOKP Rom i try it...
i have same problem on this roms: aokp/cm10/cm10.1/aospa
i try it and its dont work and with aospa to...
Problem is i have no Mobile Data
Kenneth000 said:
Hello,
I install AOKP Rom fron Maclaw and my Problem is i have no Mobile Data and i Restore my Old Rom and i dont know why but no Mobile Data....Reinstall everything but nothing help... look at screen in midle so looks like everytime Help me pls fast!
Thanks!
Click to expand...
Click to collapse
OK
Excuse my bad english first!
Copy the system / build.prop to the sd.
Copy to SD on your pc.
Text Editor to open the build prop.
Make sure that these parameters are your build.prop
If not, then replace the local parameters.
What is missing, copy them
reboot
ro.ril.hsxpa = 4
ro.ril.gprsclass = 32
ro.ril.hep = 1
ro.ril.enable.dtm = 1
ro.ril.hsdpa.category = 10
ro.ril.enable.a53 = 1
ro.ril.enable.3g.prefix = 1
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 ro.ril.hsupa.category = 14449 = 5
net.tcp.buffersize.default = 4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi = 4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts = 4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs = 4096,87380,256960,4096,16384,256960 net.tcp.buffersize.edge = 4096,87380,256960,4096,16384,256960
This was a problem for me, but it works!
There was a strong signal and 3g, but it was very very slow data transfer!
I hope I've helped!
Ok, delete all and copy it in? or how?
or upload the fixed data pls
i have same problem on this roms: aokp/cm10/cm10.1/aospa (no service)
modify
Kenneth000 said:
Ok, delete all and copy it in? or how?
or upload the fixed data pls
Click to expand...
Click to collapse
check the lines!
that there exists modify the parameter.
I think that the first two series in
Paste the others under the revised set of 2
Do not modify the other line!
I hope it was understandable!
szunyi77 said:
check the lines!
that there exists modify the parameter.
I think that the first two series in
Paste the others under the revised set of 2
Do not modify the other line!
I hope it was understandable!
Click to expand...
Click to collapse
i have inly this in:
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=montblanc
# ro.build.product is obsolete; use ro.product.device
ro.build.product=golden
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=aokp_golden-userdebug 4.2.2 JDQ39 eng.maclaw.20130705.113729 test-keys
ro.build.fingerprint=samsung/aokp_golden/golden:4.2.2/JDQ39/eng.maclaw.20130705.113729:userdebug/test-keys
ro.build.characteristics=default
# end build properties
#
# system.prop for GT-I8190
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.telephony.ril_class=SamsungExynos4RIL
ro.telephony.call_ring.multiple=false
ro.telephony.sends_barcount=1
ro.ril.hsxpa=1
ro.ril.gprsclass=10
mobiledata.interfaces=pdp0
wifi.interface=wlan0
wifi.supplicant_scan_interval=150
persist.sys.usb.config=mtp,adb
persist.service.adb.enable=1
ro.opengles.version=131072
ro.sf.lcd_density=240
hwui.render_dirty_regions=false
ste.nmf.autoidle=1
ste.dbus.bus.address=unixath=/dev/socket/dbus_ste
ste.video.dec.mpeg4.in.size=8192
ste.video.enc.out.buffercnt=5
ste.video.dec.recycle.delay=1
ste.special_fast_dormancy=false
ste.cam.front.orientation=270
ste.cam.back.orientation=90
ste.cam.ext.cfg.path.secondary=/system/usr/share/camera/config_file/aptina_mt9v113.dat
ste.omx.ctx=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.error.receiver.system.apps=com.google.android.feedback
ro.com.google.locationfeatures=1
ro.setupwizard.enterprise_mode=1
windowsmgr.max_events_per_sec=240
ro.kernel.android.checkjni=0
persist.sys.root_access=3
ro.config.ringtone=Scarabaeus.ogg
ro.config.notification_sound=Antimony.ogg
ro.config.alarm_alert=Scandium.ogg
ro.aokp.version=aokp_golden_unofficial_2013-07-05
ro.aokp.branch=jb-mr1
ro.aokp.device=golden
persist.sys.camera-sound=1
gsm.current.phone-type=1
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
and now? o.o
EDIT: i will try it now so how i understan thank you for your time! BIG THANKS
dont work really i can change only
ro.ril.hsxpa = 4
ro.ril.gprsclass = 32
that number then i reboot and nothing happen
Kenneth000 said:
i have inly this in:
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=montblanc
# ro.build.product is obsolete; use ro.product.device
ro.build.product=golden
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=aokp_golden-userdebug 4.2.2 JDQ39 eng.maclaw.20130705.113729 test-keys
ro.build.fingerprint=samsung/aokp_golden/golden:4.2.2/JDQ39/eng.maclaw.20130705.113729:userdebug/test-keys
ro.build.characteristics=default
# end build properties
#
# system.prop for GT-I8190
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.telephony.ril_class=SamsungExynos4RIL
ro.telephony.call_ring.multiple=false
ro.telephony.sends_barcount=1
ro.ril.hsxpa=1
ro.ril.gprsclass=10
mobiledata.interfaces=pdp0
wifi.interface=wlan0
wifi.supplicant_scan_interval=150
persist.sys.usb.config=mtp,adb
persist.service.adb.enable=1
ro.opengles.version=131072
ro.sf.lcd_density=240
hwui.render_dirty_regions=false
ste.nmf.autoidle=1
ste.dbus.bus.address=unixath=/dev/socket/dbus_ste
ste.video.dec.mpeg4.in.size=8192
ste.video.enc.out.buffercnt=5
ste.video.dec.recycle.delay=1
ste.special_fast_dormancy=false
ste.cam.front.orientation=270
ste.cam.back.orientation=90
ste.cam.ext.cfg.path.secondary=/system/usr/share/camera/config_file/aptina_mt9v113.dat
ste.omx.ctx=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.error.receiver.system.apps=com.google.android.feedback
ro.com.google.locationfeatures=1
ro.setupwizard.enterprise_mode=1
windowsmgr.max_events_per_sec=240
ro.kernel.android.checkjni=0
persist.sys.root_access=3
ro.config.ringtone=Scarabaeus.ogg
ro.config.notification_sound=Antimony.ogg
ro.config.alarm_alert=Scandium.ogg
ro.aokp.version=aokp_golden_unofficial_2013-07-05
ro.aokp.branch=jb-mr1
ro.aokp.device=golden
persist.sys.camera-sound=1
gsm.current.phone-type=1
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
and now? o.o
EDIT: i will try it now so how i understan thank you for your time! BIG THANKS
Click to expand...
Click to collapse
Structure looks like this!
#
# system.prop for GT-I8190
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.telephony.ril_class=SamsungExynos4RIL
ro.telephony.call_ring.multiple=false
ro.telephony.sends_barcount=1
ro.ril.hsxpa=4
ro.ril.gprsclass=32
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449 ro.ril.hsupa.category=5
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960 net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
mobiledata.interfaces=pdp0
wifi.interface=wlan0
wifi.supplicant_scan_interval=150
persist.sys.usb.config=mtp,adb
persist.service.adb.enable=1
ro.opengles.version=131072
ro.sf.lcd_density=240
#
# system.prop for GT-I8190
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.telephony.ril_class=SamsungExynos4RIL
ro.telephony.call_ring.multiple=false
ro.telephony.sends_barcount=1
ro.ril.hsxpa=4
ro.ril.gprsclass=32
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449 ro.ril.hsupa.category=5
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960 net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
mobiledata.interfaces=pdp0
wifi.interface=wlan0
wifi.supplicant_scan_interval=150
persist.sys.usb.config=mtp,adb
persist.service.adb.enable=1
ro.opengles.version=131072
ro.sf.lcd_density=240
i will copy it and put it in ok?
Kenneth000 said:
#
# system.prop for GT-I8190
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.telephony.ril_class=SamsungExynos4RIL
ro.telephony.call_ring.multiple=false
ro.telephony.sends_barcount=1
ro.ril.hsxpa=4
ro.ril.gprsclass=32
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449 ro.ril.hsupa.category=5
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960 net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
mobiledata.interfaces=pdp0
wifi.interface=wlan0
wifi.supplicant_scan_interval=150
persist.sys.usb.config=mtp,adb
persist.service.adb.enable=1
ro.opengles.version=131072
ro.sf.lcd_density=240
i will copy it and put it in ok?
Click to expand...
Click to collapse
Yes!
be careful not to have two of the same place!
check after copying the system / build.prop to have replaced the file!
Sometimes there is no root access to / system, not replace it!
ok, i try it now...thank you
dont work! after that gt blabla on the boot come only blackscreen... reinstall rom? and then?
Kenneth000 said:
dont work! after that gt blabla on the boot come only blackscreen... reinstall rom? and then?
Click to expand...
Click to collapse
I hope the other lines are not deleted?
because the problem!
I sent my list, I have copied the build prop, but the other lines no longer be deleted!!
i do it so...can you not upload me your build.prop?
but mine looks litle bit another o.o?
here:
#
# system.prop for GT-I8190
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.telephony.ril_class=SamsungExynos4RIL
ro.telephony.call_ring.multiple=false
ro.telephony.sends_barcount=1
ro.ril.hsxpa=1
ro.ril.gprsclass=10
mobiledata.interfaces=pdp0
wifi.interface=wlan0
wifi.supplicant_scan_interval=150
persist.sys.usb.config=mtp,adb
persist.service.adb.enable=1
ro.opengles.version=131072
ro.sf.lcd_density=240
hwui.render_dirty_regions=false
ste.nmf.autoidle=1
ste.dbus.bus.address=unixath=/dev/socket/dbus_ste
ste.video.dec.mpeg4.in.size=8192
ste.video.enc.out.buffercnt=5
ste.video.dec.recycle.delay=1
ste.special_fast_dormancy=false
ste.cam.front.orientation=270
ste.cam.back.orientation=90
ste.cam.ext.cfg.path.secondary=/system/usr/share/camera/config_file/aptina_mt9v113.dat
ste.omx.ctx=0
Kenneth000 said:
i do it so...can you not upload me your build.prop?
Click to expand...
Click to collapse
build.prop (4 KB)
I wrote in the beginning that I have to copy and paste!
The rest can not be changed!
I sent it to the model, modify it under the!
Related
i have done this for gingerDX rom and the miniCM7.2.0.7 for battery Save
Code:
wifi.supplicant_scan_interval = 150
pm.sleep_mode = 1
ro.ril.disable.power.collapse = 1
after i moded my build.prop i have ganed 7.3hours on GDX and on miniCM I HAVE 12.6hours on battery life will this do anything else like burn out anything there is more mods i have done and in testing then at the min so i dont no if it just this or my other mods that is helping me as well to get a good turn out any light will help?
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GingerDX
ro.build.display.id=v013
ro.build.version.incremental=eng.dx.v001
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=Sat May 14 15:04:13 CEST 2011
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=doixanh
ro.build.host=voxle
ro.build.tags=test-keys
ro.product.model=X8
ro.product.brand=Sh!tEricsson
ro.product.name=X8
ro.product.device=X8
ro.product.board=MSM
ro.product.cpu.abi=armeabi-v6j
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony Ericsson
ro.product.locale.language=nb
ro.product.locale.region=NO
ro.wifi.channels=14
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=X8
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=soju-user 2.3.1 GRH78 85442 release-keys
ro.build.fingerprint=google/soju/crespo:2.3.1/GRH78/85442:user/release-keys
# end build properties
ro.semc.batt.capacity=1200
#
# system.prop for x8
#
# wifi network etc..
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d
/dev/smd0
ro.ril.hsxpa=2
ro.ril.hsupa.category=5
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.def.agps.mode=2
ro.ril.gprsclass=12
ro.ril.def.agps.mode=2
ro.telephony.default_network=0
wifi.interface=wlan0
wifi.supplicant_scan_interval=180
#windows management
ro.sf.lcd_density=160
windowsmgr.max_events_per_sec=150
settings.display.autobacklight=1
settings.display.brightness=160
# The OpenGL ES API level that is natively supported by this device.
ro.opengles.version=131072
# Tweaks
debug.sf.hw=1
ro.compcache.default=0
#media
ro.workaround.noautofocus=1
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
ro.media.dec.jpeg.memcap=10000000
ro.media.enc.file.format = 3gp,mp4
ro.media.enc.vid.codec = m4v,h263
ro.media.enc.vid.h263.width = 176,352
ro.media.enc.vid.h263.height = 144,288
ro.media.enc.vid.h263.bps = 64000,800000
ro.media.enc.vid.h263.fps = 1,30
ro.media.enc.vid.m4v.width = 176,352
ro.media.enc.vid.m4v.height = 144,288
ro.media.enc.vid.m4v.bps = 64000,800000
ro.media.enc.vid.m4v.fps = 1,30
# For SD storage insert notification sound
persist.service.mount.playsnd = 0
# dalvik options (more tweaks)
dalvik.vm.execution-mode=int:jit
dalvik.vm.heapsize=40m
dalvik.vm.dexopt-flags=m=y
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.rommanager.developerid=cyanogenmodnightly
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=dd-MM-yyyy
ro.com.android.dataroaming=false
ro.config.ringtone=Playa.ogg
ro.config.notification_sound=regulus.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.modversion=GingerDX
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.semc.timescape_keys=Sony_Ericsson_Xperia
#Other tweaks
mot.proximity.delay=25
ro.lge.proximity.delay=25
# Increase to 100% quality JPG
ro.media.enc.jpeg.quality=100
# Decrease delay dial
ro.telephony.call_ring.delay=0
# battery save
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
# Increase the overall touch response
debug.performance.tuning=1
video.accelerate.hw=1
# Net speed settings
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
# application issue fix
ro.kernel.android.checkjni=0
___________________________
My full build.prop
Some tweaks inside.
Cheers ,
SpyderX
Sent from my X8 using Tapatalk Forum app.
Sweet dude that for putting up you're
super.sense on x8
# For SD storage insert notification sound
persist.service.mount.playsnd = 0
# dalvik options (more tweaks)
dalvik.vm.execution-mode=int:jit
dalvik.vm.heapsize=40m
dalvik.vm.dexopt-flags=m=y
#Other tweaks
mot.proximity.delay=25
ro.lge.proximity.delay=25
# Increase to 100% quality JPG
ro.media.enc.jpeg.quality=100
# Decrease delay dial
ro.telephony.call_ring.delay=0
# battery save
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
# Increase the overall touch response
debug.performance.tuning=1
video.accelerate.hw=1
Click to expand...
Click to collapse
Were these also applicable on FroyoBread or other CM6 ROMS?
EDIT: What's that "application issue fix" for?
jkrauser2 said:
Were these also applicable on FroyoBread or other CM6 ROMS?
EDIT: What's that "application issue fix" for?
Click to expand...
Click to collapse
I think so.
The application issue fix might help some apps load properly instead of not loading.
Set it to equal 0.
Cheers ,
SpyderX
Sent from my X8 using Tapatalk Forum app.
SpyderX said:
I think so.
The application issue fix might help some apps load properly instead on not loading.
Set it to equal 0.
Cheers ,
SpyderX
Sent from my X8 using Tapatalk Forum app.
Click to expand...
Click to collapse
Alright, Thanks!
I tried the 40m heapsize, seems froyobread became smoother and faster.
I also tried the jpeg quality. and yeah, full jpg quality than the default setting.
I am currently charging a lot of courage to try the "battery save" tweak.
EDIT: I think these tweaks are applicable on FroyoBread. I saw these in a X10mini thread, and it works on stock ROMs.
SpyderX said:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GingerDX
ro.build.display.id=v013
ro.build.version.incremental=eng.dx.v001
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=Sat May 14 15:04:13 CEST 2011
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=doixanh
ro.build.host=voxle
ro.build.tags=test-keys
ro.product.model=X8
ro.product.brand=Sh!tEricsson
ro.product.name=X8
ro.product.device=X8
ro.product.board=MSM
ro.product.cpu.abi=armeabi-v6j
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony Ericsson
ro.product.locale.language=nb
ro.product.locale.region=NO
ro.wifi.channels=14
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=X8
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=soju-user 2.3.1 GRH78 85442 release-keys
ro.build.fingerprint=google/soju/crespo:2.3.1/GRH78/85442:user/release-keys
# end build properties
ro.semc.batt.capacity=1200
#
# system.prop for x8
#
# wifi network etc..
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d
/dev/smd0
ro.ril.hsxpa=2
ro.ril.hsupa.category=5
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.def.agps.mode=2
ro.ril.gprsclass=12
ro.ril.def.agps.mode=2
ro.telephony.default_network=0
wifi.interface=wlan0
wifi.supplicant_scan_interval=180
#windows management
ro.sf.lcd_density=160
windowsmgr.max_events_per_sec=150
settings.display.autobacklight=1
settings.display.brightness=160
# The OpenGL ES API level that is natively supported by this device.
ro.opengles.version=131072
# Tweaks
debug.sf.hw=1
ro.compcache.default=0
#media
ro.workaround.noautofocus=1
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
ro.media.dec.jpeg.memcap=10000000
ro.media.enc.file.format = 3gp,mp4
ro.media.enc.vid.codec = m4v,h263
ro.media.enc.vid.h263.width = 176,352
ro.media.enc.vid.h263.height = 144,288
ro.media.enc.vid.h263.bps = 64000,800000
ro.media.enc.vid.h263.fps = 1,30
ro.media.enc.vid.m4v.width = 176,352
ro.media.enc.vid.m4v.height = 144,288
ro.media.enc.vid.m4v.bps = 64000,800000
ro.media.enc.vid.m4v.fps = 1,30
# For SD storage insert notification sound
persist.service.mount.playsnd = 0
# dalvik options (more tweaks)
dalvik.vm.execution-mode=int:jit
dalvik.vm.heapsize=40m
dalvik.vm.dexopt-flags=m=y
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.rommanager.developerid=cyanogenmodnightly
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=dd-MM-yyyy
ro.com.android.dataroaming=false
ro.config.ringtone=Playa.ogg
ro.config.notification_sound=regulus.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.modversion=GingerDX
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.semc.timescape_keys=Sony_Ericsson_Xperia
#Other tweaks
mot.proximity.delay=25
ro.lge.proximity.delay=25
# Increase to 100% quality JPG
ro.media.enc.jpeg.quality=100
# Decrease delay dial
ro.telephony.call_ring.delay=0
# battery save
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
# Increase the overall touch response
debug.performance.tuning=1
video.accelerate.hw=1
# Net speed settings
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
# application issue fix
ro.kernel.android.checkjni=0
___________________________
My full build.prop
Some tweaks inside.
Cheers ,
SpyderX
Sent from my X8 using Tapatalk Forum app.
Click to expand...
Click to collapse
@spyderX
Can u upload the buildprop files at here? thanks....
edit:is hard one by one edit my build prop...﹁_﹁
Send from my ST15i using XDA Premium App
Xperia X8-GingerCruZt 7.4b
XperiaMini-????
[email protected]®
Here is My Custom Build.prop ported from cm7 to eclair
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Fri Dec 17 18:35:45 2010
ro.build.date.utc=1292582145
ro.build.user=SEMCUser
ro.build.host=SEMCHost
##### Final patch of properties #####
ro.build.product=E15i
ro.build.description=E15i-user 2.1-update1 2.1.1.A.0.6 223 test-keys
ro.product.brand=SEMC
ro.product.name=E15i_1240-6018
ro.product.device=E15i
ro.product.board=delta
ro.build.version.incremental=-X_d
ro.build.tags=release-keys
ro.build.fingerprint=SEMC/E15i_1240-6018/E15i/delta:2.1-update1/2.1.1.A.0.6/-X_d:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1240-6018
ro.semc.version.cust_revision=R2B
#########################################################################
ro.config.hwfeature_wakeupkey=0
ro.config.ringtone=sony_ericsson.ogg
ro.config.notification_sound=notification.ogg
ro.semc.content.number=PA4
################# Updating of the SW Version #################
ro.semc.version.fs_revision=2.1.1.A.0.6
ro.build.id=2.1.1.A.0.6
ro.build.display.id=2.1.1.A.0.6
##### Values from product package metadata #####
ro.product.model=E15i
ro.semc.ms_type_id=AAD-3880091-BV
ro.semc.version.fs=WORLD-1-8
ro.semc.product.name=Xperia X8
ro.semc.product.device=E15
# begin build properties
# autogenerated by buildinfo.sh
#ro.build.id=2.1.1.A.0.6
#ro.build.display.id=2.1.1.A.0.6
#ro.build.version.incremental=223
ro.build.version.sdk=7
ro.build.version.codename=REL
ro.build.version.release=2.1-update1
#ro.build.date=Tue Jan 18 23:37:58 CST 2011
#ro.build.date.utc=1295365078
ro.build.type=user
#ro.build.user=hudsonslave
#ro.build.host=cnbjlx2303
#ro.build.tags=test-keys
#ro.product.model=shakira
#ro.product.brand=Sony-Ericsson
#ro.product.name=shakira
#ro.product.device=shakira
#ro.product.board=delta
ro.product.cpu.abi=armeabi
ro.product.manufacturer=Sony Ericsson
ro.product.locale.language=en
ro.product.locale.region=GB
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
#ro.build.product=shakira
# Do not try to parse ro.build.description or .fingerprint
#ro.build.description=shakira-user 2.1-update1 2.1.1.A.0.6 223 test-keys
#ro.build.fingerprint=Sony-Ericsson/shakira/shakira/delta:2.1-update1/2.1.1.A.0.6/223:user/test-keys
# end build properties
#
# system.prop for shakira
#
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
ro.ril.hep=1
ro.ril.hsxpa=2
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=5
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.def.agps.mode=2
ro.ril.gprsclass=12
ro.telephony.default_network=0
wifi.interface=wlan0
wifi.supplicant_scan_interval=90
pm.sleep_mode=1
ro.ril.disable.power.collapse=1
ro.sf.lcd_density=160
windowsmgr.max_events_per_sec=110
ro.semc.def_screen_orientation=sensor
ro.semc.timescape_keys=X8_key
ro.semc.timescape_model=1_handed
ro.semc.sound_effects_enabled=false
ro.workaround.noautofocus=1
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=10000000
ro.media.enc.hprof.vid.bps=10000000
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.ro.ril.sms_sync_sending=1
persist.adb.notify=0
DEVICE_PROVISIONED=1
# Constant values for Battery test in Service menu.
ro.semc.batt.capacity=1200
ro.semc.batt.test.consumption=150
ro.semc.batt.test.z_threshold=30
dalvik.vm.heapsize=40m
dalvik.vm.dexopt-flags=m=y
kernel.log=default
ro.telephony.call_ring.multiple=false
ro.telephony.call_ring.delay=0
debug.sf.hw=1
ro.compcache.default=0
debug.performance.tuning=1
video.accelerate.hw=1
keyguard.no_require_sim=true
#Other tweaks
ro.lge.proximity.delay=100
mot.proximity.delay=100
ro.kernel.android.checkjni=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
#ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.1_r11
ro.com.google.clientidbase=android-sonyericsson
net.bt.name=Android
ro.config.sync=yes
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.drm.active.num=4
ro.drm.active.0=semc,1
ro.drm.active.1=cmla,0
ro.drm.active.2=viaccess,0
ro.drm.active.3=marlin,1
dalvik.vm.execution-mode=int:jit
Do u mind if I take sum of ur mods for testing my rom
super.sense on x8
Hi, i copied Dsexton's mod build.prop in the current build.prop without changing or deleting the text inside. when i opened the system file after reboot i noticed there's another file named build.prop.bak in there the same text as build.prop but without Dsexton's modded build.prop. am i doing it correctly?
Sent from my GT-I9001 using xda premium
The .bak version should be the same as the original since is the backup. So yes you did it correctly. To make sure check the build.prop to see if the changes are there.
JJbdoggg said:
The .bak version should be the same as the original since is the backup. So yes you did it correctly. To make sure check the build.prop to see if the changes are there.
Click to expand...
Click to collapse
This is the original build.prop after i placed Dsexton's build.prop, located down below -
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=Cryberts Rom v1
ro.build.version.incremental=XXKPS
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Fri Nov 4 11:35:21 KST 2011
ro.build.date.utc=1320374121
ro.build.type=user
ro.build.user=root
ro.build.host=DELL89
ro.build.tags=release-keys
ro.product.model=GT-I9001
ro.product.brand=samsung
ro.product.name=GT-I9001
ro.product.device=GT-I9001
ro.product.board=GT-I9001
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9001-user 2.3.6 GINGERBREAD XXKPS release-keys
ro.build.fingerprint=samsung/GT-I9001/GT-I9001:2.3.6/GINGERBREAD/XXKPS:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9001XXKPS
ro.build.hidden_ver=I9001XXKPS
ro.build.changelist=708244
ro.flash.resolution=720
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.dev.dmm=1
dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
#
lpa.decode=false
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#
# system prop for opengles version
#
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
wifi.interface=eth0
wifi.supplicant_scan_interval=15
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=1
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r7
ro.com.google.clientidbase=android-samsung
ro.secdevenc=true
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# Nitro Lag Nullifier by zeppelinrox.
# DO NOT DELETE COMMENTS. DELETING COMMENTS WILL BREAK UNINSTALL ROUTINE!
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=
MIN_HIDDEN_APPS=
MAX_HIDDEN_APPS=
CONTENT_APP_IDLE_OFFSET=
EMPTY_APP_IDLE_OFFSET=
MAX_ACTIVITIES=
ACTIVITY_INACTIVE_RESET_TIME=
# End of Nullified Entries
##Dsextons build.prop
#
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
wifi.supplicant_scan_interval=120
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=28
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=9
ro.mot.eri.losalert.delay=2000
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
ro.mot.eri.losalert.delay=1000
ro.telephony.call_ring.delay=1000
windowsmgr.max_events_per_sec=85
mot.proximity.delay=75
ro.ext4fs=1
debug.sf.hw=1
video.accelerate.hw=1
persist.sys.shutdown.mode=hibernate
## End Tweak
Sent from my GT-I9001 using xda premium
is that all one build.prop or two separate ones?
JJbdoggg said:
is that all one build.prop or two separate ones?
Click to expand...
Click to collapse
It's all in one build.prop.
Sent from my GT-I9001 using xda premium
fadzlihellmuth said:
It's all in one build.prop.
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
What you posted doesnt look right it looks like two separate build.props in one file. Delete the build.prop.bak then rename the build.prop that is currently there to something else. Then Copy dsextons one over and make sure it is named build.prop. Btw what are you using to copy the files?
I just copy paste the text in the build.prop. so now i need to delete the bak file and restore the original one then copy over Dsexton's in it and overwrite?
Sent from my GT-I9001 using xda premium
Skip the restore bit but the rest is correct
Sent from my GT-I9000 using xda premium
Please remove Thread
Thank You
if this is for vs920, does anyone know if this will work for the vs910?
I.M.famous XMAN said:
if this is for vs920, does anyone know if this will work for the vs910?
Click to expand...
Click to collapse
More than likely no. Different phones.
Sent from my Galaxy Nexus using Tapatalk 2
Had anyone confirmed that this will indeed work on the revolution or its this just posted in the wrong ao.....
Sent from my VS910 4G using XDA
meabrams said:
Had anyone confirmed that this will indeed work on the revolution or its this just posted in the wrong ao.....
Sent from my VS910 4G using XDA
Click to expand...
Click to collapse
It won't work. I think it was posted here because its the big brother to the Revo. Talk to MT he has the Spectrum. Also the Spectrum doesn't have a forum here I believe.
Sent from my Galaxy Nexus using Tapatalk 2
indyred99 said:
It won't work. I think it was posted here because its the big brother to the Revo. Talk to MT he has the Spectrum. Also the Spectrum doesn't have a forum here I believe.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Nope it doesn't. And it's too bad nobody tries to port the VS920'S ICS to the Revo.
indyred99 said:
It won't work. I think it was posted here because its the big brother to the Revo. Talk to MT he has the Spectrum. Also the Spectrum doesn't have a forum here I believe.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Yeah spectrum doesn't have a forum I still need to post the DLL in other to be able to flash the file this is for the VS920 only! So be careful
Sent from my SPH-D710 using Tapatalk 2
does anyone have the DLL for the VS920? Sometimes the DLLs work across multiple models but the VS910 dll will not work for the Spectrum. I have the spectrum as well.
We are going to work on getting it well see what happens
Sent from my SPH-D710 using Tapatalk 2
Okay. Awesome. Anything I can do to help?
I also tried the one from the viper and it didn't work either.
Sent from my VS920 4G using Tapatalk 2
I'll check the flashing computer at Verizon and see if I can pull the .dll for you guys tomorrow
Sent from my VS910 4G using xda premium
elreydotcom said:
I'll check the flashing computer at Verizon and see if I can pull the .dll for you guys tomorrow
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
Sweet! Hope you can get it man! Thanks in advance if you do!
I'm gonna say that this is a legit file or someone went thru a lot of time to fake it. Here is the default.prop from the boot partition.
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=pc_suite
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=IMM76D
ro.build.version.incremental=VS920ZV7.47d6aee9
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Fri May 25 18:17:37 KST 2012
ro.build.date.utc=1337937457
ro.build.type=user
ro.build.user=yeoncheol.hong
ro.build.host=potato
ro.build.tags=release-keys
ro.product.model=VS920 4G
ro.product.brand=Verizon
ro.product.name=i_vzw
ro.product.device=i_vzw
ro.product.board=I_VZW
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=i_vzw
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=i_vzw-user 4.0.4 IMM76D 47d6aee8 release-keys
ro.build.fingerprint=Verizon/lge_iproj/VS920:4.0.4/IMM76D/VS920ZV7.47d6aee9:user/release-keys
ro.build.characteristics=default
gsm.version.baseband=APQ8060/MDM9200
# display lge software version
ro.lge.swversion=VS920ZV7
# end build properties
#
# system.prop for i_vzw
#
# ril
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ro.HorizontalVVM=true
# youngjun.yun.110420
# system props for NexPlayer
media.nexplayer.disable-player=false
media.nexplayer.disable-scan=false
media.nexplayer.enable-lpa=true
ro.telephony.default_network=8
# System props for audio
persist.audio.handset.mic=digital
# system prop add country/carrier by CA3
#ro.config.carrier=VZW
#ro.build.lge.version.release=VS920ZV!
persist.radio.apm_sim_not_pwdn=1
# EAS Data encryption for VZW
persist.sys.email.crypt=0
persist.sys.email.crypt_ext=0
persist.sys.email.crypt_mnt=0
# system prpo for sound exeption
# [email protected]
ro.lge.sound.case.exception=true
# For PlayReady DRM
persist.debug.dp.useoncrpc=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=false
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
#
# System property for systemui service
#
ro.build.target_operator=VZW
# sms character encoding set
#
persist.gsm.sms.forcegsm7=
#
# system prop for LGE sound case exception. added by seunghak.han, 20120225
#
ro.lge.sound.case.exception=true
# system prop for voice call steps in Korea added by seunghak.han, 20120225
#
ro.config.vc_call_vol_steps=7
#
# Sound Profile scenario. added by seunghak.han, 20120406
#
ro.lge.audio_soundprofile=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
lge.signed_image=true
ro.lge.vibrator_amp=120
ro.opengles.version=131072
dalvik.vm.execution-mode=int:jit
ro.com.android.dateformat=MM-dd-yyyy
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.lge.audio_soundexception=true
keyguard.no_require_sim=true
sys.lge.ats_start=false
ro.sf.lcd_density=320
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=dyn
ro.sf.compbypass.enable=1
dalvik.vm.heapsize=256m
dev.pm.dyn_samplingrate=1
dalvik.vm.heapgrowthlimit=70m
persist.cne.UseCne=false
persist.cne.UseSwim=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.nsrm.mode=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
ro.hdmi.enable=true
lpa.decode=false
lpa.use-stagefright=true
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=false
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
media.nexplayer.disable-player=false
media.nexplayer.disable-scan=false
media.nexplayer.enable-lpa=true
ro.use_data_netmgrd=true
ro.emmc.sdcard.partition=17
persist.timed.enable=true
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
ro.lge.touchkey=BACK|HOME|MENU
ro.bluetooth.remote.autoconnect=true
ro.qualcomm.bluetooth.dun=true
ro.qualcomm.bluetooth.ftp=true
persist.gps.qmienabled=true
persist.service.main.enable=0
persist.service.system.enable=0
persist.service.radio.enable=0
persist.service.events.enable=0
ro.ril.transmitpower=true
ro.hwui.text_cache_width=1536
ro.hwui.text_cache_height=256
dalvik.vm.heapstartsize=8m
ro.build.target_operator=VZW
ro.build.target_country=US
ro.config.ringtone=00_VZW_Airwaves.ogg
ro.config.alarm_alert=Alarm_Beep01.ogg
ro.config.notification_sound=01_Acoustic_Guitar.ogg
ro.cdma.home.operator.alpha=Verizon
ro.cdma.home.operator.numeric=310004
ro.com.google.clientidbase=android-lge
ro.com.google.clientidbase.ms=android-verizon
ro.com.google.clientidbase.gmm=android-lge
ro.com.google.clientidbase.yt=android-verizon
ro.com.google.clientidbase.am=android-verizon
wlan.chip.vendor=brcm
wlan.chip.version=bcm4330x
wifi.supplicant_scan_interval=20
wifi.lge.patch=true
wifi.lge.hanglessid=true
wifi.lge.offloading=true
wifi.lge.mhp=true
ro.afwdata.LGfeatureset=VZWBASE
persist.service.vzw.ecc=
ro.device.memory.system=0
ro.device.memory.internal=4
ro.lge.lcd_default_brightness=142
ro.lge.lcd_auto_brightness_mode=true
ro.com.google.gmsversion=4.0.3_r1
ro.setupwizard.mode=DISABLED
ro.livewallpaper.map=ENABLE
drm.service.enabled=true
ro.lge.capp_optimusui=true
ro.lge.capp_core=true
ro.lge.capp_drm=true
ro.lge.capp_divx_drm=true
ro.lge.capp_almond=true
ro.lge.capp_resource=true
ro.lge.capp_wapservice=true
ro.lge.capp_quickclip_key=true
ro.lge.capp_ghost_finger=true
ro.lge.capp_touch_scroller=true
ro.lge.capp_touch_ldi=true
ro.lge.capp_key_light_off=true
ro.lge.capp_key_exception=true
ro.lge.capp_menu_long=true
ro.lge.capp_keyled_timeout=true
ro.lge.capp_valid_batteryid=true
ro.lge.capp_wireless_charging=true
ro.lge.capp_mdm=true
ro.lge.capp_lockscreen=true
use_open_autorun=false
ro.lge.fonts=true
ro.lge.capp_app_preinstall=true
ro.lge.capp_compat=true
persist.data_netmgrd_mtu=1428
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
neph81 said:
I'm gonna say that this is a legit file or someone went thru a lot of time to fake it. Here is the default.prop from the boot partition.
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=pc_suite
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=IMM76D
ro.build.version.incremental=VS920ZV7.47d6aee9
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Fri May 25 18:17:37 KST 2012
ro.build.date.utc=1337937457
ro.build.type=user
ro.build.user=yeoncheol.hong
ro.build.host=potato
ro.build.tags=release-keys
ro.product.model=VS920 4G
ro.product.brand=Verizon
ro.product.name=i_vzw
ro.product.device=i_vzw
ro.product.board=I_VZW
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=i_vzw
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=i_vzw-user 4.0.4 IMM76D 47d6aee8 release-keys
ro.build.fingerprint=Verizon/lge_iproj/VS920:4.0.4/IMM76D/VS920ZV7.47d6aee9:user/release-keys
ro.build.characteristics=default
gsm.version.baseband=APQ8060/MDM9200
# display lge software version
ro.lge.swversion=VS920ZV7
# end build properties
#
# system.prop for i_vzw
#
# ril
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ro.HorizontalVVM=true
# youngjun.yun.110420
# system props for NexPlayer
media.nexplayer.disable-player=false
media.nexplayer.disable-scan=false
media.nexplayer.enable-lpa=true
ro.telephony.default_network=8
# System props for audio
persist.audio.handset.mic=digital
# system prop add country/carrier by CA3
#ro.config.carrier=VZW
#ro.build.lge.version.release=VS920ZV!
persist.radio.apm_sim_not_pwdn=1
# EAS Data encryption for VZW
persist.sys.email.crypt=0
persist.sys.email.crypt_ext=0
persist.sys.email.crypt_mnt=0
# system prpo for sound exeption
# [email protected]
ro.lge.sound.case.exception=true
# For PlayReady DRM
persist.debug.dp.useoncrpc=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=false
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
#
# System property for systemui service
#
ro.build.target_operator=VZW
# sms character encoding set
#
persist.gsm.sms.forcegsm7=
#
# system prop for LGE sound case exception. added by seunghak.han, 20120225
#
ro.lge.sound.case.exception=true
# system prop for voice call steps in Korea added by seunghak.han, 20120225
#
ro.config.vc_call_vol_steps=7
#
# Sound Profile scenario. added by seunghak.han, 20120406
#
ro.lge.audio_soundprofile=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
lge.signed_image=true
ro.lge.vibrator_amp=120
ro.opengles.version=131072
dalvik.vm.execution-mode=int:jit
ro.com.android.dateformat=MM-dd-yyyy
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.lge.audio_soundexception=true
keyguard.no_require_sim=true
sys.lge.ats_start=false
ro.sf.lcd_density=320
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=dyn
ro.sf.compbypass.enable=1
dalvik.vm.heapsize=256m
dev.pm.dyn_samplingrate=1
dalvik.vm.heapgrowthlimit=70m
persist.cne.UseCne=false
persist.cne.UseSwim=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.nsrm.mode=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
ro.hdmi.enable=true
lpa.decode=false
lpa.use-stagefright=true
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=false
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
media.nexplayer.disable-player=false
media.nexplayer.disable-scan=false
media.nexplayer.enable-lpa=true
ro.use_data_netmgrd=true
ro.emmc.sdcard.partition=17
persist.timed.enable=true
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
ro.lge.touchkey=BACK|HOME|MENU
ro.bluetooth.remote.autoconnect=true
ro.qualcomm.bluetooth.dun=true
ro.qualcomm.bluetooth.ftp=true
persist.gps.qmienabled=true
persist.service.main.enable=0
persist.service.system.enable=0
persist.service.radio.enable=0
persist.service.events.enable=0
ro.ril.transmitpower=true
ro.hwui.text_cache_width=1536
ro.hwui.text_cache_height=256
dalvik.vm.heapstartsize=8m
ro.build.target_operator=VZW
ro.build.target_country=US
ro.config.ringtone=00_VZW_Airwaves.ogg
ro.config.alarm_alert=Alarm_Beep01.ogg
ro.config.notification_sound=01_Acoustic_Guitar.ogg
ro.cdma.home.operator.alpha=Verizon
ro.cdma.home.operator.numeric=310004
ro.com.google.clientidbase=android-lge
ro.com.google.clientidbase.ms=android-verizon
ro.com.google.clientidbase.gmm=android-lge
ro.com.google.clientidbase.yt=android-verizon
ro.com.google.clientidbase.am=android-verizon
wlan.chip.vendor=brcm
wlan.chip.version=bcm4330x
wifi.supplicant_scan_interval=20
wifi.lge.patch=true
wifi.lge.hanglessid=true
wifi.lge.offloading=true
wifi.lge.mhp=true
ro.afwdata.LGfeatureset=VZWBASE
persist.service.vzw.ecc=
ro.device.memory.system=0
ro.device.memory.internal=4
ro.lge.lcd_default_brightness=142
ro.lge.lcd_auto_brightness_mode=true
ro.com.google.gmsversion=4.0.3_r1
ro.setupwizard.mode=DISABLED
ro.livewallpaper.map=ENABLE
drm.service.enabled=true
ro.lge.capp_optimusui=true
ro.lge.capp_core=true
ro.lge.capp_drm=true
ro.lge.capp_divx_drm=true
ro.lge.capp_almond=true
ro.lge.capp_resource=true
ro.lge.capp_wapservice=true
ro.lge.capp_quickclip_key=true
ro.lge.capp_ghost_finger=true
ro.lge.capp_touch_scroller=true
ro.lge.capp_touch_ldi=true
ro.lge.capp_key_light_off=true
ro.lge.capp_key_exception=true
ro.lge.capp_menu_long=true
ro.lge.capp_keyled_timeout=true
ro.lge.capp_valid_batteryid=true
ro.lge.capp_wireless_charging=true
ro.lge.capp_mdm=true
ro.lge.capp_lockscreen=true
use_open_autorun=false
ro.lge.fonts=true
ro.lge.capp_app_preinstall=true
ro.lge.capp_compat=true
persist.data_netmgrd_mtu=1428
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse
Hey neph! How did you get the tot apart enough to read the default.prop
Ok guys, here's the vs920.dll. Be careful but enjoy!
http://db.tt/YsvyRuYR
Sent from my VS910 4G using xda premium
death2all110 said:
Hey neph! How did you get the tot apart enough to read the default.prop
Click to expand...
Click to collapse
Because the .tot is just a raw rip of the android file system, I ran it thru photorec in ubunutu and pulled any files it found. I've learned to look for .gz archives as the two it finds are for the boot and recovery images. Once inside one of those, I pull the default.prop file and that is what you see.
Looks like we may have a ICS build for our phones, yeah!
Wish XDA would create a LG Spectrum section for us.
1linuxfreak said:
Looks like we may have a ICS build for our phones, yeah!
Wish XDA would create a LG Spectrum section for us.
Click to expand...
Click to collapse
Indeed we do and it looks like it might have gsm enabled in the build.
brandonson112 said:
Indeed we do and it looks like it might have gsm enabled in the build.
Click to expand...
Click to collapse
Yeah starting June 1 all Verizon 4g phones are being global enabled, the spectrum and rezound are getting that functionality built into the ics builds so it will only take one software update.
Sent from my VS910 4G using xda premium
Can we increase the speed of 3G?? If so, how?? Any tweaks or tricks or any other way??? (using Airtel sim)...
Hemun said:
Can we increase the speed of 3G?? If so, how?? Any tweaks or tricks or any other way??? (using Airtel sim)...
Click to expand...
Click to collapse
Use v6 supercharger script.it has the tweaks built in once u run them
Sent from my Xperia Play
Modify your build.prop with new speeds,
I cannot remember where the thread is but, I have posted my complete build.prop files for my HTC Buzz / Wildfire and my Xperia X8.
I've found one trick to speed up the 3G connection in Android Apps and Games section.Didn't try it but maybe you can try.Sorry I can't give you the link.
Sent from my Xperia™ X8
This worked for me.
https://play.google.com/store/apps/details?id=com.signal.booster
The closer you are to a signal tower, the faster the 3G and the least amount of battery used
The further you are to a signal tower, the slower the 3G and the MOST battery used.
Sent from my R800i using xda app-developers app
My WILDFIRE build.prop - my additions are from the " # GLENNS MODS " onwards, BUT I have modified values above this.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRI40
ro.build.display.id=GWK74
ro.build.version.incremental=eng.rmcc.20120314.155025
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Wed Mar 14 15:50:42 UTC 2012
ro.build.date.utc=0
ro.build.type=user
ro.build.user=rmcc
ro.build.host=kangtastic
ro.build.tags=test-keys
ro.product.model=HTC Wildfire
ro.product.brand=htc_wwe
ro.product.name=htc_buzz
ro.product.device=buzz
ro.product.board=buzz
ro.product.cpu.abi=armeabi-v6j
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=buzz
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=passion-user 2.3.3 GRI40 102588 release-keys
ro.build.fingerprint=google/passion/passion:2.3.3/GRI40/102588:user/release-keys
ro.cm.device=buzz
# end build properties
#
# system.prop for buzz
#
# Density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
ro.sf.lcd_density=120
# View configuration for QVGA.
view.fading_edge_length=8
view.touch_slop=15
view.minimum_fling_velocity=25
view.scroll_friction=0.008
# RIL specific configuration.
rild.libpath=/system/lib/libhtc_ril.so
ro.ril.ecc.HTC-WWE=999
ro.ril.ecc.HTC-ELL=92,93,94
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.vmail.23415=1571,BT
ro.ril.hsdpa.category=8
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.def.agps.mode=2
ro.ril.gprsclass=12
# For HSDPA low throughput
ro.ril.disable.power.collapse=0
# For PDP overlap problem
ro.ril.avoid.pdp.overlap=1
# update the acoustic table for Buzz NEL lab testing
ro.ril.update.acoustic.table=1
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config=max_retries=3, 2000, 2000, 2000
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.interface=eth0
wifi.supplicant_scan_interval=180
# Mobile data interfaces
mobiledata.interfaces=rmnet0,rmnet1,rmnet2
# Allow or deny tethering.
ro.tether.denied=false
# Default network type.
# 0 => WCDMA Preferred.
ro.telephony.default_network=0
# Enable Google-specific location features,
# like NetworkLocationProvider and LocationCollector.
ro.com.google.locationfeatures=1
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number.
ro.opengles.version=65536
# Disable fs check on boot by default.
sys.checkfs.fat=false
# Performance settings.
dalvik.vm.execution-mode=int:jit
dalvik.vm.heapsize=32m
ro.compcache.default=0
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
persist.sys.rotationanimation=false
persist.sys.scrollingcache=3
# Lock dirty_ratio to 20 when USB is mounted for improved transfer speed
ro.vold.umsdirtyratio=20
# Increase SKIA decode memory capability for progressive jpg file.
ro.media.dec.jpeg.memcap=8000000
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.config.ringtone=Playa.ogg
ro.config.notification_sound=regulus.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.modversion=CyanogenMod-7.2.0-RC1-buzz
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.dexopt-data-only=1
#
# GLENN MODS
#
# Increases network speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
# for response
debug.performance.tuning=1
video.accelerate.hw=1
windowsmgr.max_events_per_sec=150
# for battery
pm.sleep_mode=1
# suggested extras
ro.ril.hsxpa=3
ro.media.enc.jpeg.quality=100
Click to expand...
Click to collapse
my XPERIA X8 build.prop - Same applies, my MODS are from " # GLENNS MODS" BUT I have modified values above this, like in my Wildfire build.prop.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GingerDX
ro.build.display.id=v028
ro.build.version.incremental=eng.TeamGingerDX.20120620.162621
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Wed Jun 20 16:32:24 CEST 2012
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=Team GingerDX
ro.build.host=ZION
ro.build.tags=test-keys
ro.product.model=X8
ro.product.brand=Sh!tEricsson
ro.product.name=X8
ro.product.device=X8
ro.product.board=MSM
ro.product.cpu.abi=armeabi-v6j
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony Ericsson
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=14
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=X8
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=soju-user 2.3.1 GRH78 85442 release-keys
ro.build.fingerprint=google/soju/crespo:2.3.1/GRH78/85442:user/release-keys
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d/dev/smd0
wifi.interface=wlan0
wifi.supplicant_scan_interval=150
ro.ril.def.agps.mode=2
ro.ril.ecc.HTC-ELL=92,93,94
ro.ril.ecc.HTC-WWE=999
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=5
ro.ril.hsxpa=2
ro.ril.disable.fd.plmn.prefix=23402,23410,23411
ro.opengles.version=131072
ro.telephony.default_network=0
ro.phone_storage=0
dalvik.vm.heapsize=32m
wifi.hotspot.ti=1
dalvik.vm.dexopt-data-only=1
settings.display.autobacklight=1
settings.display.brightness=160
persist.service.mount.playsnd=0
ro.com.google.locationfeatures=1
ro.setupwizard.enable_bypass=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
ro.config.sync=yes
keyguard.no_require_sim=true
ro.rommanager.developerid=cyanogenmodnightly
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Beat_Box_Android.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.config.cal_notification=F1_MissedCall.ogg
ro.config.msg_notification=F1_New_SMS.ogg
ro.modversion=GingerDX
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.semc.timescape_keys=Sony_Ericsson_Xperia
dalvik.vm.execution-mode=int:jit
ro.workaround.noautofocus=1
persist.sys.use_16bpp_alpha=1
persist.sys.themeId=ICSandwich
persist.sys.themePackageName=com.achep.theme.ICSandwich
ro.tethering.kb_disconnect=1
wifi.hotspot.ti=1
ro.semc.wifi.hostapd=1
# GLENN MODS
# battery
ro.semc.batt.capacity=1200
pm.sleep_mode=2
ro.ril.disable.power.collapse=0
# gps
ro.ril.gprsclass=12
# window management
ro.sf.lcd_density=160
windowsmgr.max_events_per_sec=150
# tweaks
debug.sf.hw=1
ro.compcache.default=0
# media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
ro.media.dec.jpeg.memcap=10000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.file.format = 3gp,mp4
ro.media.enc.vid.codec = m4v,h263
ro.media.enc.vid.h263.width = 176,352
ro.media.enc.vid.h263.height = 144,288
ro.media.enc.vid.h263.bps = 64000,800000
ro.media.enc.vid.h263.fps = 1,30
ro.media.enc.vid.m4v.width = 176,352
ro.media.enc.vid.m4v.height = 144,288
ro.media.enc.vid.m4v.bps = 64000,800000
ro.media.enc.vid.m4v.fps = 1,30
# jpeg
ro.media.enc.jpeg.quality=100
# decrease delay dial
ro.telephony.call_ring.delay=0
# touch response
debug.performance.tuning=1
video.accelerate.hw=1
# net speed settings
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
# lock home in memory
ro.HOME_APP_ADJ=1
Click to expand...
Click to collapse
engaged in the development of a friends can look here?
http://genius-tips.com/android-4-2-jelly-bean-custom-rom-for-galaxy-advance-i9070/
build.prop << not real
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=Supressed_AMOLED Sp. Edition
ro.build.version.incremental=XXLD1
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Sun Apr 1 19:21:57 KST 2012
ro.build.date.utc=1333275717
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEI-45
ro.build.tags=release-keys
ro.product.model=GT-I9070
ro.product.brand=samsung
ro.product.name=GT-I9070
ro.product.device=GT-I9070
ro.product.board=janice
ro.product.cpu.abi=armeabi-v7a
# Samsung Specific Properties
ro.build.PDA=I9070XXLD1
ro.build.hidden_ver=I9070XXLD1
ro.build.changelist=1067329
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=ux500
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9070
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9070-user 2.3.6 GINGERBREAD XXLD1 release-keys
ro.build.fingerprint=samsung/GT-I9070/GT-I9070:2.3.6/GINGERBREAD/XXLD1:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9070XXLD1
ro.build.hidden_ver=I9070XXLD1
ro.build.changelist=1067329
ro.tether.denied=false
ro.flash.resolution=1080
# end build properties
#
# system.prop for U8500
#
#rild.libpath=/system/lib/libu300-ril.so
#rild.libargs=-c UNIX -n 2 -p /dev/socket/at_core -s /dev/socket/at_core -i rmnet0
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
# Graphics related configurations
ro.sf.lcd_density=240
ro.sf.display_rotation=0
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version=131072
# Enable RecoverySystem to emit "factory-reset" reset string
# instead of "recovery" when doing a factory reset. This is
# useful when implementing factory reset without the entire
# recovery framework.
ro.factoryresetwithoutrecovery=true
# debug.sf.hw=0 Use b2r2 as compositor in SurfaceFlinger
# debug.sf.hw=1 Use Mali as compositor in SurfaceFlinger
debug.sf.hw=1
# Set dalvik heapsize
# 2011-09-06/system/kyo change heapsize to 64MB
dalvik.vm.heapsize=64m
# STE: Low power audio - enable ULP mode
ste.nmf.autoidle=1
# Keyboard
#system props for the MM modules
media.enable-commonsource=true
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/GT-I9070.xml
net.streaming.rtsp.uaprof.bo=http://wap.samsungmobile.com/uaprof/GT-I9070BO.xml
#
# system prop for issue regarding writable directories(SDT)
#
ro.kernel.qemu=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=2.3_r9
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
dev.sfbootcomplete=0
ro.secdevenc=true
ro.wtldatapassword=true
ro.com.google.clientidbase=android-samsung
keyguard.no_require_sim=true
ro.config.ringtone=S_Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.opengles.version=131072
ro.error.receiver.default=com.samsung.receiver.error
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# BRAVIA HACK
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
# TimeScape Service
ro.semc.timescape_keys=Sony_Ericsson_Xperia
# Xloud Engine
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
windowsmgr.max_events_per_sec=300
# Achyut Add-On's
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.hsdpa.category=10
ro.ril.enable.3g.prefix=1
ro.ril.hsupa.category=6
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.sdr=1
ro.ril.enable.gea3=1
ro.ril.enable.a53=1
ro.ril.enable.dtm=1
ro.telephony.call_ring.delay=0
ro.kernel.android.checkjni=0
ro.mot.buttonlight.timeout=0
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wimax = 4096,221184,524288,4096,16384,110208
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
ro.mot.eri.losalert.delay=1000
ro.ril.disable.power.collapse=0
ro.HOME_APP_ADJ=1
video.accelerate.hw=1
debug.composition.type=mdp
debug.performance.tuning=1
persist.sys.purgeable_assets=1
debug.sf.hw=1
Click to expand...
Click to collapse
sessizcocuk said:
build.prop << not real
Click to expand...
Click to collapse
Even in download link it says:
Filename:
Supressed_AMOLED_Sp.Edition.zip
Size: 216.05 MB (226547231 bytes)
Uploaded By: Achyut
Uploaded On: 2012-11-24 05:35:39
Downloaded: 725
MD5 Sum: 71d9f40aa0b44a3b349f8dbd0f1305aa
File Desc: Supressed ROM_Sp. AMOLED Build
And Supressed_AMOLED_Sp.Edition is a GB ROM. And read rules of posting in Development section. This is for General, question. Developers open thread here, with their work. http://forum.xda-developers.com/showthread.php?t=2036181
Thread moved to General Section, post in the relevant section next time.
sessizcocuk said:
build.prop << not real
Click to expand...
Click to collapse
it is AS REAL as it can be...but it is of Supressed. Quite a few of weird sites and blogs are reporting the ROM as JB 4.2 :\ :\
regards,
achyut.