Related
I have been trying for several weeks now to upgrade to 2.3.3 XWJVB, but when the flashing of the firmware completes and the phone restarts, i am asked to type a password. I am not quite sure what to enter and i hope somebody can help me to successfully install 2.3.3 XWJVB.
Thanks
Karan
had u activate anti theft ?
if yes , the password is ur
if no , here u have some basic pass 1234 /0000 / 7023
try those pass
NCSoft said:
had u activate anti theft ?
if yes , the password is ur
if no , here u have some basic pass 1234 /0000 / 7023
try those pass
Click to expand...
Click to collapse
I have tried this and anti theft is not active, it still does not work. it does not ask for a password when I flash a 2.2/2.2.1 firmware
Sent from my GT-I9000 using XDA App
karansk94 said:
I have tried this and anti theft is not active, it still does not work. it does not ask for a password when I flash a 2.2/2.2.1 firmware
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
from where u download rom ?
XDA forum and also tried the firmware from samfirmware.com
It asks me for a password on all gingerbread firmwares
Sent from my GT-I9000 using XDA App
NCSoft said:
had u activate anti theft ?
if yes , the password is ur
if no , here u have some basic pass 1234 /0000 / 7023
try those pass
Click to expand...
Click to collapse
why 7023???
madigan94 said:
why 7023???
Click to expand...
Click to collapse
I haven't tried 7023, is it worth flashing it again to retry this code?
Sent from my GT-I9000 using XDA App
when that happened to me i used those 3 codes and with 7023 was unlocked 1st time , i read about those codes at slashgear or youradroidsoul smth like that long time ago
NCSoft said:
when that happened to me i used those 3 codes and with 7023 was unlocked 1st time , i read about those codes at slashgear or youradroidsoul smth like that long time ago
Click to expand...
Click to collapse
I will try this code tomorrow, thanks for your help
Sent from my GT-I9000 using XDA App
If that doesn't work I heard that just entering wrong passwords will factory reset it and then it will work.
DrFredPhD said:
If that doesn't work I heard that just entering wrong passwords will factory reset it and then it will work.
Click to expand...
Click to collapse
Could you tell me what the factory rest code is please?
Sent from my GT-I9000 using XDA App
Search its in secret codes post .
jje
JJEgan said:
Search its in secret codes post .
jje
Click to expand...
Click to collapse
Could your provide me a link please?
Sent from my GT-I9000 using XDA App
NCSoft said:
here u have some basic pass 1234 /0000 / 7023
try those pass
Click to expand...
Click to collapse
i have just tried these codes and none of them work, is there something wrong with the flashing process?
karansk94 said:
Could you tell me what the factory rest code is please?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
factory data reset *#*#7780#*#* hard reset *2767*3855#
Check this out, it might prove helpful
karansk94 said:
Could your provide me a link please?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Sorry my search button does not work either .
jje
JJEgan said:
Sorry my search button does not work either .
jje
Click to expand...
Click to collapse
i have tried the codes several times and it said that i will loose everything on my SD card and i did this again and it worked and it booted fine. Strangely i did not loose any data on internal and external sd card. Thanks for your help/tips, much appreciated
hey guys,
i was wondering what was the easiest way to root and install clockworkmod recovery on my phone?
i have realized that you have probably seen this question many times before and i apologize for that. i have tried searching for this and although i have found many results i find myself confused about which one is best and easiest to do.
all i am asking is if anyone could possibly post a link to and easy to follow guide to accomplish this
sorry and thanks in advance
The easiest is to flash the root package ( should end in .tar) into the PDA section via Odin with your phone in Download Mode
Sent from my GT-I9000 using xda app-developers app
!n0x said:
The easiest is to flash the root package ( should end in .tar) into the PDA section via Odin with your phone in Download Mode
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
do you think you could post the link with the method and download file?
nandoz_211 said:
do you think you could post the link with the method and download file?
Click to expand...
Click to collapse
Do a search for cf root and select the one for your current firmware
slaphead20 said:
Do a search for cf root and select the one for your current firmware
Click to expand...
Click to collapse
okay so ive had a look the the cf-root method that you have suggested, it looks pretty straight forward the only thing is im not sure which file to download.
my build number is FROYO.DTJP5
if someone would kindly write down the file name of what i need that would be greatly appreciated
U should get a better firmware like jw4...
And cf root for it is easily available...
if my post helped, don't mind hitting thanks ;-)
Sent from my GT-I9000 using Tapatalk 2
As, above, upgrade to gingerbread first
slaphead20 said:
As, above, upgrade to gingerbread first
Click to expand...
Click to collapse
okay so now i have GINGERBREAD.XWJW6
what do i download i tried jw4 but my phone isnt recognized in odin. im not sure if they are related problems
nandoz_211 said:
okay so now i have GINGERBREAD.XWJW6
what do i download i tried jw4 but my phone isnt recognized in odin. im not sure if they are related problems
Click to expand...
Click to collapse
jw6 is fine too..
Now find the Cf root..
And flash it via Odin by putting the file in PDA..
If my post helped, don't mind hitting thanks
Sent from my GT-I9000 using Tapatalk 2
nandoz_211 said:
okay so now i have GINGERBREAD.XWJW6
what do i download i tried jw4 but my phone isnt recognized in odin. im not sure if they are related problems
Click to expand...
Click to collapse
Sounds like you need to reinstall the Samsung drivers..... but if it is recognized with the new room then do what the guy above said
drakester20 said:
jw6 is fine too..
Now find the Cf root..
And flash it via Odin by putting the file in PDA..
If my post helped, don't mind hitting thanks
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
slaphead20 said:
Sounds like you need to reinstall the Samsung drivers..... but if it is recognized with the new room then do what the guy above said
Click to expand...
Click to collapse
okay so it recognizes my phone, and im using jw4 because there is no jw6, well as far as i can find but after pressing start it fails
i have no idea why
i dont know if this is related or not but when i extract the file i got from the cf-root thread it is not one that i can use in odin so i use the file i downloaded and it is still a tar file
Just put the.tar in pda and flash
slaphead20 said:
Just put the.tar in pda and flash
Click to expand...
Click to collapse
it fails, also im using odin 1.7, im not sure if that makes a difference either
nandoz_211 said:
it fails, also im using odin 1.7, im not sure if that makes a difference either
Click to expand...
Click to collapse
Use 1.85 version, never failed me
Sent from my GT-I9300 using Tapatalk 2
_arawn_ said:
Use 1.85 version, never failed me
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
THANK YOU!!!! finally i'm rooted, if i could press the thanks button anymore i would and thank you to the rest of the people who have helped me through this!!!
hi
Hope I am posting in the right place as I am new to this.
I have a galaxy N-7000 and was using recovery to put Paranoid rom on my phone.
It started to install it then stopped and the screen went blank.
I cant switch the phone on nor can I use vol/up+ power+ menu button.
I also cannot get it into download mode and when I connect it to the computer it dos'nt see it.
I know I have probably ruined the phone but am hoping beyond hope someone can help
Thanks for anything.
Are sure battery was charged quite good?
If possible try to manage for it if you have low while start flashing.
And this shud goes to Q/A section.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Are sure battery was charged quite good?
If possible try to manage for it if you have low while start flashing.
And this shud goes to Q/A section.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hi
can you tell me how I move it to Q&A
I think the battery was ok
best regrads
Moderators only can move it.
Anyway.can you manage to get JIG ? Then try to get into download mode with jig.
Once remove battery for few min then reinsert and try to get into download mode once again.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Moderators only can move it.
Anyway.can you manage to get JIG ? Then try to get into download mode with jig.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hi I can buy jig but my phone just wont switch on I can get no screen it is as if switched off
can the jig help me then.
regards
I have reposted this in Q&A like you suggested
Yes it may help.
And as i edited above, remove battery for few min and reinsert and try to get into download mode.
Sent from my GT-N7000 using xda premium
Moved To Q&A
Please post questions in the Q&A section
evertonfc said:
hi
Hope I am posting in the right place as I am new to this.
I have a galaxy N-7000 and was using recovery to put Paranoid rom on my phone.
It started to install it then stopped and the screen went blank.
I cant switch the phone on nor can I use vol/up+ power+ menu button.
I also cannot get it into download mode and when I connect it to the computer it dos'nt see it.
I know I have probably ruined the phone but am hoping beyond hope someone can help
Thanks for anything.
Click to expand...
Click to collapse
Before flashing PA on what ROM you are ON ? Stock ICS ?
If so Did you wiped on stock kernel ?
bricked?
i think youve just bricked your note..
did you follow imilka's instructions? that is critical,
borikat said:
i think youve just bricked your note..
did you follow imilka's instructions? that is critical,
Click to expand...
Click to collapse
hi
Thanks for help what are imilka's instructions
regards
sahilarora2003 said:
Before flashing PA on what ROM you are ON ? Stock ICS ?
If so Did you wiped on stock kernel ?
Click to expand...
Click to collapse
hi
First thanks for reply
The problem happened installing Paranoid_Note_v01
I think the rom before was KingDroid_ICS_Notemania_Edition
The kernal was Franco.Kernal-r5
hope this can help
regards
evertonfc said:
hi
Thanks for help what are imilka's instructions
regards
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1797698
regisso66 said:
http://forum.xda-developers.com/showthread.php?t=1797698
Click to expand...
Click to collapse
Hi
yes just checked I cannot do anything the phone is off and will not switch on
into download mode nor recovery is it possible a usb jig may help?
I don't know what is a jig usb, but you should be able to flash a kernel with pc-odin and reboot recovery again.
See Dr Ketan's guide : http://forum.xda-developers.com/showthread.php?t=1424997
regisso66 said:
I don't know what is a jig usb, but you should be able to flash a kernel with pc-odin and reboot recovery again.
See Dr Ketan's guide : http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
Hi
I cannot get the phone to turn on and when connected to pc it is not recognised.
regards
evertonfc said:
Hi
I cannot get the phone to turn on and when connected to pc it is not recognised.
regards
Click to expand...
Click to collapse
Hi
Is there anyway back for a hard bricked mobile...ie. wont turn on, wont go to recovery and wont go to download mod.
oh and the computer wont recognise it. :crying::crying:
Sorry to hear that ...
Did you try to remove the battery and put it back ?
hi guys i'm just got curious when i install the "PhilZ-cwm6 - Safe Stock Based Kernel Featuring PhilZ Touch 5" using the method of Odin3 1.85 , every time ill boot there is a YELLOW TRIANGLE on it. my question is, is it a bad sign or it is just natural???
pedropenduko said:
hi guys i'm just got curious when i install the "PhilZ-cwm6 - Safe Stock Based Kernel Featuring PhilZ Touch 5" using the method of Odin3 1.85 , every time ill boot there is a YELLOW TRIANGLE on it. my question is, is it a bad sign or it is just natural???
Click to expand...
Click to collapse
if you are really curious then please start to search and read.
Your mistake and everything related to it was handled here many times.
Flashing a kernel with Odin results in the triangle. Search for the threads telling you how to remove it by yourself.
Then your curiosity will be answered...
Ah then it means that yellow triangle is not harmful to my device?
Sent from my GT-N7000 using XDA Premium 4 mobile app
pedropenduko said:
Ah then it means that yellow triangle is not harmful to my device?
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh no, did you read what I wrote? Search for the answer yourself. I do not want to feed you like a baby...
At least just give a hint I believe that I am on a right forum to ask help or questions
Sent from my GT-N7000 using XDA Premium 4 mobile app
ThaiDai said:
Oh no, did you read what I wrote? Search for the answer yourself. I do not want to feed you like a baby...
Click to expand...
Click to collapse
Atlas please give a link to know some info about it. I'm not good searching still newbie here
Sent from my GT-N7000 using XDA Premium 4 mobile app
http://forum.xda-developers.com/showthread.php?t=1494114
in that link post #1 is it safe to follow to put away the YELLOW TRIANGLE?
pedropenduko said:
http://forum.xda-developers.com/showthread.php?t=1494114
in that link post #1 is it safe to follow to put away the YELLOW TRIANGLE?
Click to expand...
Click to collapse
Read and follow the first post.
Sent from my C6833 using XDA Premium 4 mobile app
Hi guys im having some issues with my phone. I need the stock firmware so I can send it to the repair centre. Im after the i8190NxxALL6 I need to flash it via odin. I have searched this forum and found nothing any ideas?
Sent from my GT-I8190N using xda app-developers app
ykdr-scott said:
Hi guys im having some issues with my phone. I need the stock firmware so I can send it to the repair centre. Im after the i8190NxxALL6 I need to flash it via odin. I have searched this forum and found nothing any ideas?
Sent from my GT-I8190N using xda app-developers app
Click to expand...
Click to collapse
google says you have not searched hard enough
http://live.samsung-updates.com/index.php?device=GT-I8190N
efaustino84 said:
google says you have not searched hard enough
http://live.samsung-updates.com/index.php?device=GT-I8190N
Click to expand...
Click to collapse
Downloaded but when I extract files theres is nothing there. Just 1big tar file.
Sent from my GT-I8190N using xda app-developers app
ykdr-scott said:
Downloaded but when I extract files theres is nothing there. Just 1big tar file.
Sent from my GT-I8190N using xda app-developers app
Click to expand...
Click to collapse
...and that´s exactly what you need...
flash it via Odin
set CBC to Zero with Triangle away
make factory reset
check in Download-Mode if Counter is 0 and ROM "official"
HTH
JackoMJ
JackoMJ said:
...and that´s exactly what you need...
flash it via Odin
set CBC to Zero with Triangle away
make factory reset
check in Download-Mode if Counter is 0 and ROM "official"
HTH
JackoMJ
Click to expand...
Click to collapse
Were do I put this file? Pda? Phone? Etc..
Thats the file?
Sent from my GT-I8190N using xda app-developers app
ykdr-scott said:
Were do I put this file? Pda? Phone? Etc..
Thats the file?
Sent from my GT-I8190N using xda app-developers app
Click to expand...
Click to collapse
yes put .tar in PDA
JackoMJ said:
yes put .tar in PDA
Click to expand...
Click to collapse
Sent from my GT-I8190N using xda app-developers app
Try Odin v3.07 if that doesn't work try v3.04 make sure you installed samsung drivers and kies is not running in the background. Also have 70-80% charge on phone then boot to download mode and use Odin.
Sent from my GT-I8190 using xda app-developers app
JackoMJ said:
...and that´s exactly what you need...
flash it via Odin
set CBC to Zero with Triangle away
make factory reset
check in Download-Mode if Counter is 0 and ROM "official"
HTH
JackoMJ
Click to expand...
Click to collapse
More like reset counter to 0 first before you flash official firmware
AssToast said:
More like reset counter to 0 first before you flash official firmware
Click to expand...
Click to collapse
of course you are right.
first reset counter because you need root for that.
then flash firmware
and don´t forget to flash stock recovery !!!