Dear members,
The time came to say goodbye! The project is abandoned!!!! It is over now!!! :'( There will not be an newer release of BluePill because I bought an iPhone Yes, I know everybody will hate me for that but I think it is better than staying with a low budget smartphone!!! Thank you for supporting me!!! It was a great time here!!! I hope that somebody will take over this project!!!
Yours Dennis (ics_fan)
Android BluePill
Firmware Distribution for LG Optimus L3 E400
This is the official thread for Android BluePill!
What is BluePill?
BluePill is a project which is based on the CM and AOSP-branch of Android. BluePill has a good stability and it is customizable. You can apply themes from the PlayStore with the integrated ThemeChooser and make your own modifications on Hardware.
The difference to other projects like CyanogenMod are that BluePill has new features from Android 4.2 and 4.3. It also have visual changes like transparency.
Downloads:
Prereleases:
Currently there are no prereleases!
Final Releases:
BluePill Android 1.0.1 : https://www.dropbox.com/s/kbmww3fnf2gnkr3/android.bluepill_rtw_20130811-ics_fan%40xda.zip
Note: The link could be disabled because of too much traffic... I will reupload the file untill friday if Dropbox doesn't turn on the link Thanks
Kernel:
Suxsem Kernel: http://d-h.st/qkm
1,1GhZ Kernel : Link coming soon...
SDmergE400: https://www.dropbox.com/s/uagnlm80rhh0py5/SDMergE400BluePillStep4.zip (Thanks to diego88it for that work)
Updates:
Currently no updates or bugfixes
Installation Guide:
Root is needed! Root your phone if you haven't done it yet! Without rooting your device cannot run a Custom Firmware like BluePill, CyanogenMod,etc...
Flashing from Stock ROM (Android 2.3.6 Gingerbread)
Flashing from any Android 2.3 Gingerbread Custom ROM
Clean Installation of BluePill
1. Boot into CWM
2. Wipe: Data/Cache/Dalvik/Battery Stats
3. Format /system /data /cache
4. Flash BluePill.zip
5. Flash Suxsem.zip
6. Reboot
Flashing from CyanogenMod 9 Nightly (Ice Cream Sandwich)
Flashing from CyanogenMod 9-based ROM (ICS-branch)
1. Boot into CWM
2. Wipe: Cache/Dalvik/Battery Stats
3. Format /cache
4. Flash BluePill.zip
5. Flash Suxsem.zip
6. Reboot and wait untill the update is completed
PROBLEMS MAY APPEAR! IF THE FLASH FROM CyanogenMod 9 FAILS THAN TRY WITH THE INSTRUCTION FOR ANDROID 2.3 GINGERBREAD!
Flashing from Beta 1/ Release Candidate of BluePill
Flashing from AOSP v1.0 / AOSP-branch
1. Boot into CWM
2. Wipe: Cache/Dalvik/Battery Stats
3. Format /cache
4. Flash BluePill.zip
5. Flash Suxsem.zip
6. Reboot and wait untill the update is completed
Changelog
BluePill changelog
BluePill Version 1.0.1 (Final)
The Android Distribution `BluePill´ will be released next week but here is a preview of all changes I did:
Changelog:
Project Butter (Thanks to totiadrenalin for the tutorial)
Some Android 4.2 libs
Android 4.3 Camera
Android 4.3 Gallery
Android 4.2 Clock App (Thanks for the port of Mobileillusion)
BluePill Bootanimation
BluePill Platlogo
BluePill Platlogo Animation (Clouds)
Blue themed settings.apk
Colors changed
GreenBubbles (Live Wallpaper on PhaseBeam base)
StatusBar transparency
build.prop display/color tweaks
build.prop performance tweaks
Updated contacts.apk
Updated mms.apk
Updated GoogleQuickSearchBox.apk
Removed not working JapaneseIME
Cleaned up/ Rebuilt whole ROM
Deep Sleep Tweak
Android 4.3 Roboto Font
Video Tweak
GPU Tweak
Google Play Store 4.3.1
Updated Framework colors
Screenshots?
Gapps are included?
Sent from my LG-E400 using xda app-developers app
Screenshots will come soon... Cannot upload them The Gapps are included... I hope you like it
Sent from my LGE400 using AOSP
E405
Can i flash E400 rom on E405....?:silly:
As I know you cannot flash E400 Roms on the E405 because of the hardware but I haven't tested it yet. You can try out if it works and tell me about it but there is a chance of bricking your device. I'm not sure if E400 Roms work on E405. It's like the Galaxy Ace.
Roms for the S5830 Ace doesn't work on S5830i Ace because of different hardware but they look the same.
waow verry very thanks
downloading now keep up the good work
com.android.phone force close when I try to enter APN settings
I congratulate perfect, better for me than the cm9, the camera ok, ok phone, the 3G is not as I have not, I repeat perfect, as serious note good radio, but not going to have everything.
P.d, the perfect SDMerg the last step.:good::good:
awesome .. i want to try it :good:
Hey, is it multilingual? I want to try it, since I'm formatting my device and reverting it to stock.
Thanks for all positive feedback I'm happy that you like it I wanna keep up working on it but let me time
Yes, It is multilingual. All languages which are included with the AOSP by Google
It has brazilian portuguese lang, but since gingerbread needs less memory than ICS, I'll pass.
I'm downloading it, though ;D
andwie said:
com.android.phone force close when I try to enter APN settings
Click to expand...
Click to collapse
it also occurred to me ... overall is good :good:
Is this rom go with sdmerg?
Στάλθηκε από το LG-E400 μου χρησιμοποιώντας Tapatalk 2
if you put your.
peter36- said:
if you put your.
Click to expand...
Click to collapse
Of course that I mean if I put SD merg after install the rom
Στάλθηκε από το LG-E400 μου χρησιμοποιώντας Tapatalk 2
Sdmerg can propably work but you have to delete the settings.apk in the package if there is one.
If you don`t do it the AOSP settings.apk will be replaced by CyanogenMods settings.apk.
I will try to include SDmerge with AOSP v2.0 and fix the Brightness, Volume and APN bug in the settings which force closes after starting.
I`m not a fan of SDmerge So I`ll do my best for development of this Rom... But I can`t tell you if SDmerge will come because it is made for CM and my Rom has just a part of CM and the most is ported from Maclaw Studio
ics_fan said:
Sdmerg can propably work but you have to delete the settings.apk in the package if there is one.
If you don`t do it the AOSP settings.apk will be replaced by CyanogenMods settings.apk.
I will try to include SDmerge with AOSP v2.0 and fix the Brightness, Volume and APN bug in the settings which force closes after starting.
I`m not a fan of SDmerge So I`ll do my best for development of this Rom... But I can`t tell you if SDmerge will come because it is made for CM and my Rom has just a part of CM and the most is ported from Maclaw Studio
Click to expand...
Click to collapse
OK thanks for the moment ill stay in cm9 and I see if I try later and I tell you if and how its work with sdmerg
Στάλθηκε από το LG-E400 μου χρησιμοποιώντας Tapatalk 2
agrios28 said:
OK thanks for the moment ill stay in cm9 and I see if I try later and I tell you if and how its work with sdmerg
Στάλθηκε από το LG-E400 μου χρησιμοποιώντας Tapatalk 2
Click to expand...
Click to collapse
Okay I don't want to copy CyanogenMod or something else... I will try to port SDmerg today and If it works I will release the ''.zip'' today or tomorrow. But there will be a development for SDmerg Don't worry
Edit: I just read about SDmerg...No positive things SDmerg activates Mass Storage. AOSP has since Ice Cream Sandwich a PTP/MTP connection only except CyanogenMod-ICS. The same for the Lockscreen! AOSP doesn't have 6 targets only 4. And under the pictures in the original thread there is a text: "CM9 is required". Sorry i'm a beginner so I don't have experiences like other xdadevelopers
For everyone who is using SDmerg right now: Please stay in CyanogenMod 9 and don't download my Rom.
Related
MIUI SwAT Rom - Specialized with Android Technology
Shockem, Indirect, Da_Reaper
Hi guys, after a long time i am releasing my own rom based on MIUI.
Basically the name SwAT was created as a team name.
Sorry, im having trouble uploading the rom. If i can't upload it by today i will upload it tomorrow with an update and more features. I didn't do much in the first release anyway. But i'm hoping it'll upload.
Rom Features
-Android 4.0.3 (Ice Cream Sandwich)
-Modded updater-script
-Matrix V13 BFS Kernel (3.0.13)
-No visual changes, yet
-Very fast, clean & stable!
-English, Chinese
-Fully optimized and tweaked
-ROOT
-Speed optimizations
-All system applications updated to latest available
-Excellent battery life!
-ICS Music Player
-DSP Manager
-Others i forgot!
Changlog
1.12.23
RC1
- Initial Release
Direct Download
http://t.co/IVdHWFcd
How to install
- Copy Rom zip to your SDCard,
- Start Recovery,
- Do a wipe
- Install ROM,
- Reboot.
Issues
-Not aware of any now
Donations
If you would like to donate please click this link. DONATE , Thanks!
Credits
- Da_Reaper for starting the team and getting me going
- Indirect for starting the team and getting me going
- Everyone who helped the comunity, Thanks!
- Google for releasing the OTA earlier than i expected!
- Mathkid95!
- MIUI
About the team
-Currently consists of indirect, da_reaper and I.
-We are willing to get anyone with experience and time on board. Just PM me if interested.
-Indirect is taking care of NS4G builds, I do NS.
Please follow @vevekkk , @xindirect & @da_reaper on twitter !
Hit the thanks button
thanks for releasing it
Sent from my Nexus S using Tapatalk
dan96815 said:
thanks for releasing it
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
No problem
also i jus made our website its still under construction but i jus want to put it out there cuzz our releases will be there aswell
www.xSwATx.webs.com
also i jus made our website its still under construction but i jus want to put it out there cuzz our releases will be there aswell
www.xSwATx.webs.com
Tried MIUI 1.12.16 last week and disappointed to say the least.
Downloading yours and will give it a try - hope the bugs (on 1.12.16) are gone.
Thanks for sharing.
Any screenshots available? Or does this look like stock ICS MIUI?
not a multilanguage........
Inviato dal mio Nexus S I9023 usando Xda Premium.
not booting
What I did:
1. Wipe
2. Install the ROM
3. Reboot
Hang in Google logo. I9023
No screenshots yet and as far as multi language goes no you can get language packs from their website
Sent from my Nexus S 4G using Tapatalk
Make sure u wipe cache and factory then install rom and reboot
Sent from my Nexus S 4G using Tapatalk
Is it normal for it to show Google logo twice and then boot up?
Da_Reaper said:
Make sure u wipe cache and factory then install rom and reboot
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
Tried again, still in Google logo. And no logcat.
Could we get some rom screenshots?
Edit: messed up
Edit: sorry, messed up again
S suxeN said:
Could we get some rom screenshots?
Click to expand...
Click to collapse
Here you go.
What's difference to this thread/Rom ???
Gesendet von meinem Nexus S mit Tapatalk
danielrod said:
Is it normal for it to show Google logo twice and then boot up?
Click to expand...
Click to collapse
Sure, my NS does it on ever ROM that i've actually noticed.
---------- Post added at 05:07 AM ---------- Previous post was at 05:01 AM ----------
Da_Reaper said:
MIUI SwAT Rom - Specialized with Android Technology
Shockem, Indirect, Da_Reaper
Rom Features
-Android 4.0.3 (Ice Cream Sandwich)
-Modded updater-script
-Matrix V13 BFS Kernel (3.0.13)
-No visual changes, yet
-Very fast, clean & stable!
-English, Chinese
-Fully optimized and tweaked
-ROOT
-Speed optimizations
-All system applications updated to latest available
-Excellent battery life!
-ICS Music Player
-DSP Manager
-Others i forgot!
Changlog
1.12.23
RC1
- Initial Release
Direct Download
http://t.co/IVdHWFcd
Click to expand...
Click to collapse
Thanks for getting this out! Anything that is MIUI based i'm eager to try...
idaeis said:
What's difference to this thread/Rom ???
Gesendet von meinem Nexus S mit Tapatalk
Click to expand...
Click to collapse
Another one of their team members (shockem) attempted uploading the ROM and had computer equipment issues all day yesterday. I believe that this is exactly the same MIUI ROM that person was attempting to launch...
idaeis said:
What's difference to this thread/Rom ???
Gesendet von meinem Nexus S mit Tapatalk
Click to expand...
Click to collapse
Thats the original one, da_reaper helped me post the rom because i had no time to post it on the thread after uploading. Its on the main thread now.
Another my port mod MIUI dark theme. Separated thread from my previous MIUI 2.3.9 port rom because this rom supposed to be my last full MIUI Rom for this device and the next version should be only an OTA port update or upgrade patch, so the size to upload and download will be smaller than full rom.
I am not an android developer, my knowledge is very limited, I just tried to make my android phone more comfortable for me.
Features:
- mOCk Kernel v1.6.12, (boot image has been modded)
- Extended settings included
- Ads blocker hosts included
- Ring ICS Lockscreen ( Weather also work on lockscreen )
- 9s-Weather included
- Mi root File Explorer included
- 2 way call recorder, use CallRecorder app from skvalex or rVoix.apk from avs333
- ICS themed keyboard
- Modified theme based on Black Ice theme as default
- Simple blue ice splash & boot animation
- 4 Way reboot (long press power button)
- Spareparts tools
- Compass
- google maps streetview
- CM7 camera beside MIUI camera
- Angry GPS
- SD card tweak ( to make read sdcard faster )
- Sony Bravia Engine
- Default wallpapers have changed, both lockscreen and desktop
- Centered clock at default
- etc...
Works:
- USB tether work great
- Native Wifi tether work great
- Haptic feedback
- Operator names has been fixed for Indonesian operators and some Indian operators
Any things not mentioned as working.
Not works:
- FM
- HDMI
Removed:
- MIUI talk
- MIUI status
Cpu clock is running at 1.3GHz max and 122MHz min at smartassV2 governor by default. But you can change them with SetCPU or other app.
Credits:
MIUI credit goes to MIUI devs
mOCk kernel credit goes to mantera
Lockscreen credit goes to picard aka fodi
BlackIce theme credit goes to cgvelmax
Icons credit goes to foreverone
other modules & libraries goes to TJ_Style & Issac87
Edowar for teach me things...
And others (Sorry I forgot)...
If you update from previous MIUI 2.2.3 or 2.3.9:
1. Install trough CWM
2. Wipe cache
3. wipe dalvik cache
3. Reboot
4. Done
The mandatory installation order if update from other rom:
1. Install trough CWM
2. Wipe data
3. Reboot
4. Wait until settled ( Will takes about 2-3 minutes for first boot)
5. Reboot again... (will takes faster than first boot )
6. Done
* The second boot actually is the first fresh boot!
[CK MIUI Dark theme 2.3.30 ]
- Download CK MIUI Dark theme 2.3.30 rom. MD5hash= 8cceb2a369444854956125e6b27a6554
- Download audio lib patch. (So fool I missed it to integrate )
- Download Additional Libs. (This one also )
Flash all files using CWM as order, start flash with the rom followed by audio lib patch and the Additional libs file.
[Upgrade to CK MIUI Dark theme 2.4.6 ]
Just back from vacation.. This is my another thanks to forum... since it's one of my best ports.
- Download The Dark CK MIUI 2.4.6 rom upgrade.
Added some Malaysian carrier name.
To upgrade to the dark CK MIUI 2.4.6 you should upgrade it from 2.3.30 above.
For you who want to use SDKernel get it Modded SDKernel v5.0 here... Credit goes to Austrie.
I am not responsible for any damages (bricking/phone ruining) occurred while flashing or using this ROM. By using this ROM, you understand that I am not liable for any or all consequences of using this ROM. If you don't know what you're doing, DON'T TRY IT.
.
. Reserved .
Top！！！！！！！！
Thanks for you great work,sir!
good work bro..
Downloading now, slow connection, just curious why your version is big (approx.114mb+2.5mb) whereas FR's version only 91mb
TIA
what's the difference between 2.3.9 and 2.3.30?
i updated my 2.3.9 to 2.3.30 with update option/not wiped (full install)...
hoping miui v4, released n buggless
paarkhi said:
Downloading now, slow connection, just curious why your version is big (approx.114mb+2.5mb) whereas FR's version only 91mb
TIA
Click to expand...
Click to collapse
Because I didn't made as clean as posible, even I've added some apps integrated just for standard in my port also some customization. Unfortunately, I've also forgot to remove things I don't use like miui default file explorer since I've added a replacement
Sent from my CSL-MI410 using Tapatalk
CacingKalung said:
Another port mod MIUI 2.3.30 dark theme. Separated thread from my previous MIUI 2.3.9 port rom because this rom supposed to be my last full MIUI Rom for this device and the next version should be only an OTA port update, so the size to upload and download will be smaller than full rom.
I am not an android developer, my knowledge is very limited, I just tried to make my android phone more comfortable for me.
Features:
- mOCk Kernel v1.6.12, (boot image has been modded)
- Extended settings included
- Ads blocker hosts included
- Ring ICS Lockscreen ( Weather also work on lockscreen )
- 9s-Weather included
- Mi root File Explorer included
- 2 way call recorder, use CallRecorder app from skvalex or rVoix.apk from avs333
- ICS themed keyboard
- Modified theme based on Black Ice theme as default
- Simple blue ice splash & boot animation
- 4 Way reboot (long press power button)
- Spareparts tools
- Compass
- google maps streetview
- CM7 camera beside MIUI camera
- Angry GPS
- SD card tweak ( to make read sdcard faster )
- Sony Bravia Engine
- Default wallpapers have changed, both lockscreen and desktop
- Centered clock at default
- etc...
Works:
- USB tether work great
- Native Wifi tether work great
- Haptic feedback
- Operator names has been fixed for Indonesian operators and some Indian operators
Any things not mentioned as working.
Not works:
- FM
- HDMI
Removed:
- MIUI talk
- MIUI status
Cpu clock is running at 1.3GHz max and 122MHz min at smartassV2 governor by default. But you can change them with SetCPU or other app.
Credits:
MIUI credit goes to MIUI devs
mOCk kernel credit goes to mantera
BlackIce theme credit goes to cgvelmax
Icons credit goes to foreverone
other modules & libraries goes to TJ_Style & Issac87
Edowar for teach me things...
And others (Sorry I forgot)...
If you update from previous MIUI 2.2.3 or 2.3.9:
1. Install trough CWM
2. Wipe cache
3. wipe dalvik cache
3. Reboot
4. Done
The mandatory installation order if update from other rom:
1. Install trough CWM
2. Wipe data
3. Reboot
4. Wait until settled ( Will takes about 2-3 minutes for first boot)
5. Reboot again... (will takes faster than first boot )
6. Done
* The second boot actually is the first fresh boot!
[CK MIUI Dark theme 2.3.30 ]
- Download CK MIUI Dark theme 2.3.30 rom.
- Download Additional Libs.
Flash both files using CWM, start flash with the rom followed by the Additional libs file.
I am not responsible for any damages (bricking/phone ruining) occurred while flashing or using this ROM. By using this ROM, you understand that I am not liable for any or all consequences of using this ROM. If you don't know what you're doing, DON'T TRY IT.
.
Click to expand...
Click to collapse
gud work freind
ade_chemical said:
what's the difference between 2.3.9 and 2.3.30?
i updated my 2.3.9 to 2.3.30 with update option/not wiped (full install)...
hoping miui v4, released n buggless
Click to expand...
Click to collapse
You can see the features I've added and also things which working in this rom, there are some different with 2.3.9.
And for MIUIv4, I can't port it right now because no kernel support the camera yet. Camera is mandatory for my phone. Badly... I'm not kernel dev. So until now, I just play around with gb miui with more features works and fit enough with me.
Sent from my CSL-MI410 using Tapatalk
elol said:
gud work freind
Click to expand...
Click to collapse
Thanks mate... waiting for your next release also.
Sent from my CSL-MI410 using Tapatalk
CacingKalung said:
Camera is mandatory for my phone
Click to expand...
Click to collapse
Yes, camera is a must
how to disable "sim network unlock pin" screen ?
how to disable "sim network unlock pin" screen ?
Click to expand...
Click to collapse
I don't have an idea to remove that screen. The only way now is to disable sim pin.
Sent from my CSL-MI410 using Tapatalk
Hey CK, pls try to find solution for FM radio....
CK
How about if you try to modify MIUI ROM using .35 kernel??is new kernel made it better or worse?
Sent from my FIH-FB0 using XDA
wow..
you did it again..
i already download it,but will install it later..
need to clean my SD card first because it's too messy
---------------
BTW, is it any different between Austrie Kernel with this Mock,
in term of performance?
CK superb work as expected. Had the luxury of doing a full wipe install of this release. Could'nt ask for a better ROM.
Not sure why you have written last ROM !...hope you can continue your good work in the upcoming releases also.
Couple of points
You have mentioned that Carrier name has been corrected for Indonesian and some Indian carriers. I am still getting unknown. Please guide me how and where have you incorporated this so that I can manually add the Indian carriers and check
Guess you would have used the Miui DHD release for this port. I observed there was a fmradioserver in system\bin in the DHD rom. Any luck with the file (or they have always been around and we still need to figure out else where for our device )
Thanks once again and hope you will continue releasing a MIUI update atleast once a month.
cacingkalung,
from the screenshots alone I'm already hooked onto MIUI wanting to flash this ROM. currently I am on Maclite ROM with UC kernel, 2.6.32.9, do I need to flash to a stock or something before flashing?
I read the first post on step by step instructions but this is my first time flashing to MIUI so wanted to make sure I didn't screw up.. what would your steps be to flash this ROM, from a nandroid backup, full wipe, and then..?
Thanks in advance for the ROM and I hope to be using it soon! Good job!
jaiprathap777 said:
Hey CK, pls try to find solution for FM radio....
Click to expand...
Click to collapse
I'm not continuing for FM, not yet may be. I don't know I just try things when I got time.
Arya_3RDNumber said:
CK
How about if you try to modify MIUI ROM using .35 kernel??is new kernel made it better or worse?
Click to expand...
Click to collapse
That I've not touch it yet... I want to try to, may be next time.
phan_tom said:
wow..
you did it again..
i already download it,but will install it later..
need to clean my SD card first because it's too messy
---------------
BTW, is it any different between Austrie Kernel with this Mock,
in term of performance?
Click to expand...
Click to collapse
For performance, actually I don't care about score as long as I can feel smooth and not laggy any time .
I've tried a little between mOCk and SD on 3D gaming, I can say mOCk work better then SD, with SD there is some lag while mOCk is smoother. But the phone is not too hot with SD. I use the same minimum and maximum cpu clock with the same governor for both.
vijayar said:
CK superb work as expected. Had the luxury of doing a full wipe install of this release. Could'nt ask for a better ROM.
Not sure why you have written last ROM !...hope you can continue your good work in the upcoming releases also.
Couple of points
You have mentioned that Carrier name has been corrected for Indonesian and some Indian carriers. I am still getting unknown. Please guide me how and where have you incorporated this so that I can manually add the Indian carriers and check
Guess you would have used the Miui DHD release for this port. I observed there was a fmradioserver in system\bin in the DHD rom. Any luck with the file (or they have always been around and we still need to figure out else where for our device )
Thanks once again and hope you will continue releasing a MIUI update atleast once a month.
Click to expand...
Click to collapse
It's not my last rom, it's should be my last FULL GB MIUI rom. The next release should be an OTA update for this version (not full rom but update package), and so on (hopefully ). So we still can taste updated release without download full package of rom. And yes, hopefully I can continue to upload the update .
I've include some Indian carriers to, but may be I got non updated list of them that's why I was needed the list of it. I took the list from a web, and may be your gsm carrier code not listed yet. I took it for Indian carriers code from http://www.gsm-security.net/gsm-operator-codes.shtml. if you have an updated list, please let me know. To add the list, you should decompile the framework-res.apk as I and FR discussed in FR thread, make change and recompile it.
For the radio, I've not continued yet.
cheezzzz said:
cacingkalung,
from the screenshots alone I'm already hooked onto MIUI wanting to flash this ROM. currently I am on Maclite ROM with UC kernel, 2.6.32.9, do I need to flash to a stock or something before flashing?
I read the first post on step by step instructions but this is my first time flashing to MIUI so wanted to make sure I didn't screw up.. what would your steps be to flash this ROM, from a nandroid backup, full wipe, and then..?
Thanks in advance for the ROM and I hope to be using it soon! Good job!
Click to expand...
Click to collapse
Consider to backup all apps using titanium backup.
Here the steps to flash it from Maclite:
1. Get in to CWM
2. Install update zip file (this update zip rom)
3. wipe data
4. reboot ( the first boot will take longer )
5. Wait about a minutes after MIUI came up
6. reboot again ( this should be much faster than the first boot )
7. Welcome to the dark MIUI...!
If you have backup all apps using titanium backup, set the SuperUser to accept root ( in Superuser app, press menu and tick ON Root ). Than install titanium backup and do restore apps.
Overview
Codename Lungo is a customized, aftermarket firmware distribution for several Android devices. Based on CyanogenMod, Codename Lungo is designed to increase battery life and size over Android-based ROMs released by vendors and carriers.
Features
Great Base
Lightweight & Fast
No Bloatware!
Longer Battery Life
Custom Launcher
Add-ons
Community Driven
And so much more...
Screenshots
Changelog
Credits and Acknowledgments
check the Codename Lungo website
Links & Other info
Kernel: Stock CyanogenMod
Documentation & F.A.Q
Add-ons
Facebook & Google+!
Codename Lungo is a Community driven ROM! So we now have a Facebook Group and a Google+ Page & Community
Here you can post mods, new ideas or just chat about the ROM!
Enjoy and JOIN! Facebook Page | Google+
Download ROM!
@ Codename Lungo Website
XDA:DevDB Information
Codename Lungo, ROM for the Samsung Galaxy Tab 2
Contributors
TimV_
ROM OS Version: 2.3.x Gingerbread
Based On: CyanogenMod
Version Information
Status: Testing
Current Beta Version: CM11
Beta Release Date: 2014-11-17
Created 2014-05-05
Last Updated 2015-01-11
I'm currently running this rom and no joke is it stripped out! I ran into an issue with no navigation buttons on first boot but once I got passed the initial sign in they appeared. Also the screen shots gave me the impression it had tablet ui. Sad to see its phablet ui. Unless I'm missing something? Not a fan of lowering dpi but ill do it for now... I assume that will kick in the ui on this rom? I guess I'll find out.
Everything is very snappy so far. I love hollowed out roms so thank you for this nice contribution! I'll keep tinkering with it!
Oh and I see the launcher has a tablet ui toggle but it's not real tablet ui. I see now where those screens I saw came from
Sent from my GT-P3113 using XDA Premium HD app
@TimV_, will you include cherry picks in your cm10 builds like them?
Drkstar81 said:
I'm currently running this rom and no joke is it stripped out! I ran into an issue with no navigation buttons on first boot but once I got passed the initial sign in they appeared. Also the screen shots gave me the impression it had tablet ui. Sad to see its phablet ui. Unless I'm missing something? Not a fan of lowering dpi but ill do it for now... I assume that will kick in the ui on this rom? I guess I'll find out.
Everything is very snappy so far. I love hollowed out roms so thank you for this nice contribution! I'll keep tinkering with it!
Oh and I see the launcher has a tablet ui toggle but it's not real tablet ui. I see now where those screens I saw came from
Sent from my GT-P3113 using XDA Premium HD app
Click to expand...
Click to collapse
Sorry, for not mentioning the toggle I will write it in the documentation now
And if ypu want to help with the ROM just seng me a PM with what you can do I am searching someone who know how to edit en recompile the settings apk
baliriot said:
@TimV_, will you include cherry picks in your cm10 builds like them?
Click to expand...
Click to collapse
I don't know what you mean I use add-ons for my rom that wil be filled over time
Its ok then, moving on...
very nice rom
Updated ROM fixed some FC's
Hey can u make this for the Samsung exhibit 2 4g
via my jb'd P.A GTAB2 7.0 or E24G CM9'D
hatememarkz said:
Hey can u make this for the Samsung exhibit 2 4g
via my jb'd P.A GTAB2 7.0 or E24G CM9'D
Click to expand...
Click to collapse
Leave it in THIS TOPIC
It won't let me reply bro
rokcin cm9☜ v6+geekyengine+adrenolibs pure sikcness love my devz ☜
CM10 hardware accelerated?
deejayzee said:
CM10 hardware accelerated?
Click to expand...
Click to collapse
Yes, it is.
Sent from my GT-P3110 using xda app-developers app
Note! I forgot to delete one apk that causing a battery drain. Follow the instructions below to fix it.
1. Open your file explorer with root capabilities.
2. Go to system/app
3. Delete the GMScore.apk (the one with the puzzle piece as icon.)
4. Reboot your phone into recovery.
5. Format ( wipe) the cache partition.
6. Reboot your phone and wait for it to finish.
7. Done
If you still having heavy drainage you can recalibrate the battery.
1. Charge your phone over night to 100% and leave the charger in.
2. Reboot into recovery
3. Do a wipe battery stats
4. Reboot your phone
5. Unlock your sim card
6. Unplug the charger.
7.done, now the battery needs to calibrate it self again let the battery drain between 4 and 10% do this 3 to 5 times then your battery is recalibrated.
Sorry, for the problems caused.
F irst jelly bean 4.2 coming at the end off this week
Hi i download this file
JB 4.2 | P3110 Main Servers
md5sum: b92e71e38674e931c7649273e32920e8 122,2 MB
And have error on install, alredy check the md5.
It took me like 10hrz to dl'd 4.1.2 but I got it finally runnin 3113 version freakin awesome rom
sent frm da beanz w/ jelly on da side
hatememarkz said:
It took me like 10hrz to dl'd 4.1.2 but I got it finally runnin 3113 version freakin awesome rom
sent frm da beanz w/ jelly on da side
Click to expand...
Click to collapse
What version do you install?
tuespazio said:
Hi i download this file
JB 4.2 | P3110 Main Servers
md5sum: b92e71e38674e931c7649273e32920e8 122,2 MB
And have error on install, alredy check the md5.
Click to expand...
Click to collapse
Running the latest CWM Recovery?
the screenshots is from 4.1.2 right?
its no 4.2....?
this rom has the option to tablet ui?
===========================================================================
Android 4.2.2 Coming Soon by AFX-8.1
under build --- Still..
Log- GAPPS 4.2.2 13th.03. 2013
Graphical Installation Flashxter with Aroma
Latest Updated Apps
Holo and trebuchet home Launcher
4.2.2 Settings and Systemui
etc.
===========================================================================
===========================================================================
Google Android Artiven FlashXter For LG GT540 OPT/SWIFT
Based ON Vintra Artiven FlashXtrer Official
With All features Working..
Before saying any thing Try it.!
Available Platforms oN
Google Android Artiven FlashXter,- Ice-cream Sandwich, Jellybean
Versions,- 4.0.4 , 4.1.2
This Rom(AFx8) Contains all the stuff
for a perfect Rom, & ready to taste.
No need to worry anything- All Functions Works 99%.
I need usb tethering.. iam using it always to browse net.
Camera is my second most wanted.
Am using it Still "No Bugs" No "close error MSG"
If you are using GT540, you hope for Good working,
Camera
USB/Wifi Tethering
3G Speed
HQ Interface
More Space
More Ram
Better Touch
Minimal system partition Usage
Holo 2 theme
Tweaks
Higher Android Platform
Battery use
But do you get all this in one ROM?
Answer "NO"... But AFx8 is all in one.
High HQ Interface With Low Memory And Usage
No Need to Overclock For Max Performance
Just Do What you want..
For me all i need is in this Rom
Updated Kernel
USB Tethering
Latest home
Fixed Bugs and errors
Updated = Framework
Settings
FX8
SystemUI
Superuser
Camera App
Gallery2
VoiceDialer
TelephonyProvider
Development
CertInstaller
DownloadProvider
DownloadProvider
Browser
Contacts
ContactsProvider
Phone
MovieStudio
System app
latest Fonts
lib added
usr\srec\en-US added
pda Net
Changed = Signal icon
booting style & Animation
Removed = Unused Apk,s For more space
Added = Gmail2
more settings
Android terminal
vendor
contacts
contact provider
GAPPs fixed and Updated to 2013 MAR
flashxter
etc.
-----
About: UI and Rom - This Rom (AFX) don't Run or Work On Surface UI.
Its Made From Source of Android and Ported To GT540.
System-
Cpu -600Min ~ 744Max
Ram-181
System space- 150~190Mb
ARTIVEN FX - Versions
This is only For LGE GT540 optimus/swift
Download The latest Rom for our device-
-------------------------------------------------------------------------
-------------------------------------------------------------------------
Build -: :laugh: 2013.03.05
PLT -: Ice Cream Sandwich 4.0.4
Features -: CM9.1
ROM -: Artiven FlashXter 8.0v
Download:-
A-Fx8
-------------------------------------------------------------------------
-------------------------------------------------------------------------
build -: victory: 2013.02.23
PLT -: Jellybean 4.1.2
Features -: CM10
ROM -: Artiven FlashXter 6.1v
Download- AFx6
http://depositfiles.com/files/chusv093x
-------------------------------------------------------------------------
-------------------------------------------------------------------------
Download it.
Put it on your SD-card.
Flash it With Clockwork-Mod.
Reboot Enjoy..!
---------------------------------------------------------------------------
Special thanks for:- his "Base"
miroslav_mm
Dont Forget To Hit ThankS
Thank you For Choosing FlashXter...
Nice job, I am gonna try :good:
Good job. You tube to play. Video online does not work for me. Google Search produces errors
There is no DeskClock in your rom, I thought this is original Android 4.2.1,
Same rom I have made few days ago
[MOD]-CyanogenMod 10 with CM10.1-Features
http://forum.xda-developers.com/showthread.php?t=2136301
Your rom and my rom is same lol
This is not 4.2.1?
skvor01 said:
This is not 4.2.1?
Click to expand...
Click to collapse
This is just a mod of CM 10.1
Download my rom and check out
Download
https://www.dropbox.com/s/txqbjm2g85c4xnu/Update-Mode-CM-10.1-LG-GT540.zip
Freinds -
skvor01 said:
Good job. You tube to play. Video online does not work for me. Google Search produces errors
Click to expand...
Click to collapse
I have deleted it for reduce ram and space...
I will have it in next Version or update..
Thanks for you kind replies and Wishes
I will try more on it...
Clock uses more ram that's why i removed it.
and Do u come a cross any "end/closing" app problems?
Online video problem causes because of Flash player error on Jellybean.
There is no Flash-player for Ported Jellybean!
If you see any Flash for GT540 JB4.2 please note me...
Thank-you.
AW: Jellybean 4.2.1 For GT540 Optimus/Swift
Flash is even slow on gingerbread. On jellz bean , which is not officially supported its useless
sent from my phone.
Thanks for this!!! ;d
Welcome
Hellboybazinga said:
Thanks for this!!! ;d
Click to expand...
Click to collapse
Your Welcome frnd i would be happy if you press thankz button...
What about free ram on clear system? More than PolishVodka's jellybean?
untorched-----
untorched said:
What about free ram on clear system? More than PolishVodka's jellybean?
Click to expand...
Click to collapse
Can't Say More just try...! I hope to make Smoother on My Next versions
You see FX6 it has same as others but some unused stuffs removed.
downloading and installing works have as
how to set system partition recomended?
how to set system partition recomended ? Jellybean 4.2.1 version "ARTIVEN FX6"
System size 134 mb,system partition min. 150 mb.
thanks ..
Thanks, gonna try it
ErickNoz said:
Can't Say More just try...! I hope to make Smoother on My Next versions
You see FX6 it has same as others but some unused stuffs removed.
Click to expand...
Click to collapse
It would be great if you fix BT Headset in the next version as Polishvodka did in his version. Thanks.
Link is down. 404 error. Mirrors anyone?
We are waiting for 4.2.2
Any news?
ONLY for tonyp's cm10.1 T-Build 1 and PA build 12!
For build 2 and PA 13 onwards, refer to tonyp's rom thread. If anyone wants quickmemo for some other rom, let me know.
File attached to this post. Just flash in recovery and reboot.
To activate quickmemo, press vol up + vol down button together as usual as in stock ROMs.
Dont bother if "how to use quickmemo" tutorial FC, you dont need the tutorial, you just need quickmemo, right?
It required changes to frameworks, so trying directly on some other ROM(other than T-build and PA) may not work.
*qmemocm10.1oldbl.zip should work on both bootloaders (tonyp's CM10.1 T-build 01)
*pa12quickmemo.zip for ParanoidAndroid build 12 (new bl) by tonyp
Once again, ONLY for tonyp's T-Build 1 and PA 12, not newer versions!
Thanks to arararagi for his work.
Pretty cool! Thanks a lot.
Please port for Pengus77 CM10
Sent from my LG-P990 using Tapatalk 2
Perfect QuickMemo!!
rugglez said:
Tested with tonyp's cm10.1 T-Build 1. May not work with other cm10.1 Roms. If anyone wants quickmemo for some other rom, let me know.
Dont try on old bootloader ROM, only new bl CM10.1.
File attached to this post. Just flash in recovery and reboot.
To activate quickmemo, press vol up + vol down button together as usual as in stock ROMs.
Dont bother if "how to use quickmemo" tutorial FC, you dont need the tutorial, you just need quickmemo, right?
Required changes to frameworks.
Thanks to arararagi for his work.
Click to expand...
Click to collapse
Can someone please make it work on oldbl? Thanks.
Updated OP with Paranoid Android quickmemo for new bl too.
mind_challenge said:
Can someone please make it work on oldbl? Thanks.
Click to expand...
Click to collapse
could you try this out?
For CM10.1 both old and new bl. (PA old bl version not out yet)
If you confirm, I'll add it to the OP too
Awesome. Thank you, just what I needed
Thanks! Great work!
Sent from my LG-P990 using xda app-developers app
Thanks,works on old bootloader with cm10.1 T-Build 2 and kk-kernel v3.
:crying::crying: i had some issue after installed, the power menu become weird
Attach with screen shot, success to used it but the power menu description is......
jackn3o said:
:crying::crying: i had some issue after installed, the power menu become weird
Attach with screen shot, success to used it but the power menu description is......
Click to expand...
Click to collapse
Just confirming, but did you happen to install it on build 2? Because, as the OP says, it's only for build 1, and the build 2 version is in tonyp's rom thread.
If you flashed over build 2, reflash the rom and flash the quickmemo zip from tonyp's thread.
rugglez said:
Just confirming, but did you happen to install it on build 2? Because, as the OP says, it's only for build 1, and the build 2 version is in tonyp's rom thread.
thx dude :laugh::laugh: u are so ice :good:
i alraedy get it at Tony threat
Click to expand...
Click to collapse
jackn3o said:
:crying::crying: i had some issue after installed, the power menu become weird
Attach with screen shot, success to used it but the power menu description is......
Click to expand...
Click to collapse
BTW... Great theme man :thumbup: ... Which theme is it.... And also the wallpaper ???? Any download link you can give
[ROM][JB] [4.2.2] Avatar ROM for LG Optimus 2X (p990) - Updated[May 11, 2013] - http://forum.xda-developers.com/showthread.php?t=2167192
[ROM][JB] [4.2.2] Avatar ROM for LG Optimus 2X (p990) - Updated[May 11, 2013]
I was com from this ROM be4 TonyP's cm10.1
I applied a theme n jus wipe system n flash tony's ROM, the theme can bring forward to tony's ROM
My theme is miui V5
Sent from my LG-P990 using xda app-developers app
Can you provide the theme apk.... Otherwise I'll have to download the whole ROM, flash it, download theme and apply it and then flash tonyp's ROM again..... That's a lot of hassle considering that I have already flashed tonyp's ROM and setup all my settings....
Deleted... Sorry Rugglez for off topic above and below this post....
OK done using this theme https://play.google.com/store/apps/details?id=com.fsproductions.theme.miui.v5 and applying it using XPOSED Framework.... The Power of Xposed unleashed ..... Looks beautiful
owais40 said:
OK done using this theme https://play.google.com/store/apps/details?id=com.fsproductions.theme.miui.v5 and applying it using XPOSED Framework.... The Power of Xposed unleashed ..... Looks beautiful
Click to expand...
Click to collapse
opps, just saw this and
seem like you get the theme edy, here have a thread for the Miui V5 theme :fingers-crossed:
http://forum.xda-developers.com/showthread.php?t=2116796
One warning here:
Do NOT flash these files on CM10.1 build 03+ or PA build 13+!!
I provide appropriate flashable zips for my newer builds (which even have that tutorial completely removed) - check the threads.
It might be a good idea to emphasize this a little more in the OP.
A huge thanks to rugglez for the whole idea, without him those files wouldn't exist
I need quickmemo+ app for oppo f11
I need quickmemo+ app for oppo f11. I need to restore my backup. Can someone help me?