Related
CID incorrect update fail incredible S
I got an S-ON htc incredible S.
And I getting this error CID incorrect update fail.
HELP!
aaa124 said:
CID incorrect update fail incredible S
I got an S-ON htc incredible S.
And I getting this error CID incorrect update fail.
HELP!
Click to expand...
Click to collapse
So what are you trying to do?
Like OTA or RUU ?
Sent from my Nexus 7
It should be ruu install. You'll need a goldcard. There's a sticky somewhere..
Sent from my potato chips using xda qwertyuiop
I was unlocking the boot loader and this happened.:/
I was trying to root my phone by downgrading hboot to enable the soff
"I wan;t able to do it"
zukri90 said:
It should be ruu install. You'll need a goldcard. There's a sticky somewhere..
Sent from my potato chips using xda qwertyuiop
Click to expand...
Click to collapse
aaa124 said:
CID incorrect update fail incredible S
I got an S-ON htc incredible S.
And I getting this error CID incorrect update fail.
HELP!
Click to expand...
Click to collapse
OK if you are running the Downgrade script, just answer yes when it asks to make a goldcard. That is what is causing the CID error.
tpbklake said:
OK if you are running the Downgrade script, just answer yes when it asks to make a goldcard. That is what is causing the CID error.
Click to expand...
Click to collapse
Hi,
My device is htcdev unlocked and S-ON, when i try to run the script it gets stuck at downgrading i waited for around 10 mins and then disconnected the device. please let me know what to do.
Thanks in advance.
akshaywani said:
Hi,
My device is htcdev unlocked and S-ON, when i try to run the script it gets stuck at downgrading i waited for around 10 mins and then disconnected the device. please let me know what to do.
Thanks in advance.
Click to expand...
Click to collapse
Thanks for hijacking the thread. Your question doesn't have anything to do with the topic in the title.
Anyway, in your case it sounds like you have not prepared your PC correctly. Have you installed the latest HTC drivers? Have you verfied that your phone has ADB Debugging enabled on the phone and the FASTBOOT option disabled in Settings?
tpbklake said:
Thanks for hijacking the thread. Your question doesn't have anything to do with the topic in the title.
Anyway, in your case it sounds like you have not prepared your PC correctly. Have you installed the latest HTC drivers? Have you verfied that your phone has ADB Debugging enabled on the phone and the FASTBOOT option disabled in Settings?
Click to expand...
Click to collapse
Sorry for hijacking the thread . I was trying to avoid creating a separate thread for a thing that could be answered in this thread. Yes latest HTC drivers are installed, ADB debugging is enabled and FASTBOOT is disabled. also i have tried this at least 3-4 times, when i disconnect the phone after waiting for around 10mins it asks do you want to create a gold card, then i connect my phone again and press yes. Once the whole process is done and i try to run RUU it says incorrect CID.
Thanks,
Akshay
akshaywani said:
Sorry for hijacking the thread . I was trying to avoid creating a separate thread for a thing that could be answered in this thread. Yes latest HTC drivers are installed, ADB debugging is enabled and FASTBOOT is disabled. also i have tried this at least 3-4 times, when i disconnect the phone after waiting for around 10mins it asks do you want to create a gold card, then i connect my phone again and press yes. Once the whole process is done and i try to run RUU it says incorrect CID.
Thanks,
Akshay
Click to expand...
Click to collapse
The question could have also been asked in the downgrade script thread. Go there, read the instructions, specifically the support section and post the required information.
So how can I fix the problem? I'm new to this forum and I don't know what is the next step for fixing the mess.
When I press the volume down and the power I get
Fastboot
recovery
factory reset
sim lock... (but I cant move through these options)
then SD checking \image pg....
loading failed
then CID incorrect!
Update Fail!
Press <POWER> to reboot.
What is the procedure to fix this error? I can't even navigate through the options.
Does it have to do with the unlocking the boot loader in htcdev with ncredible S( asia wwe)?
tpbklake said:
Thanks for hijacking the thread. Your question doesn't have anything to do with the topic in the title.
Anyway, in your case it sounds like you have not prepared your PC correctly. Have you installed the latest HTC drivers? Have you verfied that your phone has ADB Debugging enabled on the phone and the FASTBOOT option disabled in Settings?
Click to expand...
Click to collapse
aaa124 said:
So how can I fix the problem? I'm new to this forum and I don't know what is the next step for fixing the mess.
When I press the volume down and the power I get
Fastboot
recovery
factory reset
sim lock... (but I cant move through these options)
then SD checking \image pg....
loading failed
then CID incorrect!
Update Fail!
Press <POWER> to reboot.
What is the procedure to fix this error? I can't even navigate through the options.
Does it have to do with the unlocking the boot loader in htcdev with ncredible S( asia wwe)?
Click to expand...
Click to collapse
You have a file pg32img.zip file on sdcard root. Remove it and you can navigate bootloader menu.
Thanks man!
the error CID stopped ( does it mean the error was removed?)
Am i clear to contnue rooting?
best
Nonverbose said:
You have a file pg32img.zip file on sdcard root. Remove it and you can navigate bootloader menu.
Click to expand...
Click to collapse
should i enable or disable the fast boot?
[
QUOTE=aaa124;29891720]Thanks man!
the error CID stopped ( does it mean the error was removed?)
Am i clear to contnue downgrading hbooot?
best[/QUOTE]
Hello, I want to ask if what is happening to my phone now normal.
I am following the steps of : http://forum.xda-developers.com/showthread.php?t=1373697
and I got:
***RELOCKED***
***Security Warning***
VIVO PVT SHIP S-ON RL
HBOOT_2.02.002
......
When I enter fastboot the same page appears and doesnot enter inside the phone
I am waiting to download the ruu gingerbread
Nonverbose said:
You have a file pg32img.zip file on sdcard root. Remove it and you can navigate bootloader menu.
Click to expand...
Click to collapse
aaa124 said:
Hello, I want to ask if what is happening to my phone now normal.
I am following the steps of : http://forum.xda-developers.com/showthread.php?t=1373697
and I got:
***RELOCKED***
***Security Warning***
VIVO PVT SHIP S-ON RL
HBOOT_2.02.002
......
When I enter fastboot the same page appears and doesnot enter inside the phone
I am waiting to download the ruu gingerbread
Click to expand...
Click to collapse
Please enter command
Code:
fastboot getvar all
post all info here except imei and serial no.
http://i49.tinypic.com/309mst0.png
this is what i got:
http://i49.tinypic.com/309mst0.png
Nonverbose said:
Please enter command
Code:
fastboot getvar all
post all info here except imei and serial no.
Click to expand...
Click to collapse
aaa124 said:
http://i49.tinypic.com/309mst0.png
this is what i got:
http://i49.tinypic.com/309mst0.png
Click to expand...
Click to collapse
Did you create a goldcard?
Run the downgrade RUU in fastboot mode.
Yup I created a goldcard.
I haven't run the RUU yet waiting for it to finish download.
But my main concern is it normal to get relocked?
Nonverbose said:
Did you create a goldcard?
Run the downgrade RUU in fastboot mode.
Click to expand...
Click to collapse
aaa124 said:
Yup I created a goldcard.
I haven't run the RUU yet waiting for it to finish download.
But my main concern is it normal to get relocked?
Click to expand...
Click to collapse
Yes that's normal, the ruu cannot run on an unlocked bootloader so the script automatically locks it.
RUU didnot work, the error is that the mobile is of different version,
what should I do next?
What Rom should I use and the link to download it
Nonverbose said:
Yes that's normal, the ruu cannot run on an unlocked bootloader so the script automatically locks it.
Click to expand...
Click to collapse
I tried to flash a RUU in order to get back to stock but what ended up happening was that after the installation the phone would continue to boot up on the HTC screen and continue in that manner.
When I go into Hboot mode this is the information that comes up:
VIVO PVT SHIP S-OFF RL
HBOOT-6.13.1002
RADIO-3805.04.03.27_M
eMMc-boot
Apr 1 2011, 18:34:39
This is the RUU I used: RUU_Vivo_BellMobility_WWE_1.37.666.3_Radio_Radio_20.23.30.0802U_38.02.01.17_M_release_174461_signed
I know other people have had this problem and some of the solutions recommended were getting the rom.zip file from the RUU and renaming it to PG32IMG.zip and putting that on the root of the sdcard. I would like to know which RUU would be best for doing this as the one I previously used doesn't work.
Radar12 said:
I tried to flash a RUU in order to get back to stock but what ended up happening was that after the installation the phone would continue to boot up on the HTC screen and continue in that manner.
When I go into Hboot mode this is the information that comes up:
VIVO PVT SHIP S-OFF RL
HBOOT-6.13.1002
RADIO-3805.04.03.27_M
eMMc-boot
Apr 1 2011, 18:34:39
This is the RUU I used: RUU_Vivo_BellMobility_WWE_1.37.666.3_Radio_Radio_20.23.30.0802U_38.02.01.17_M_release_174461_signed
I know other people have had this problem and some of the solutions recommended were getting the rom.zip file from the RUU and renaming it to PG32IMG.zip and putting that on the root of the sdcard. I would like to know which RUU would be best for doing this as the one I previously used doesn't work.
Click to expand...
Click to collapse
Since you are S-OFF with the Revolutionary HBOOT, you can not simply flash a RUU to return to stock because the Revolutionary HBOOT prevents itself from being overwritten.
Also the RUU you are attempting to flash is an old Froyo ROM and if you have run any Gingerbread based ROMs, this RUU would have caused you to radio brick your phone. In fact you may have already radio bricked it and that is why it won't boot past the HTC screen.
You need to search this forum for the correct way to remove the Revolutionary S-OFF and return to stock.
I tried using this method to get rid of S-OFF but whenever I attempt 2c I get this: error: cannot load 'vivo_downgrade.img'
http://forum.xda-developers.com/showpost.php?p=15732727&postcount=14
Radar12 said:
I tried using this method to get rid of S-OFF but whenever I attempt 2c I get this: error: cannot load 'vivo_downgrade.img'
http://forum.xda-developers.com/showpost.php?p=15732727&postcount=14
Click to expand...
Click to collapse
You need to put the vivo_downgrade.img file in the same directory where you have adb.exe and fastboot.exe.
tpbklake said:
You need to put the vivo_downgrade.img file in the same directory where you have adb.exe and fastboot.exe.
Click to expand...
Click to collapse
Yeah I did the .img file in the same directory, it might be a USB problem although on bootloader it says Fastboot USB so it should be connected properly. Still get the same error.
Radar12 said:
Yeah I did the .img file in the same directory, it might be a USB problem although on bootloader it says Fastboot USB so it should be connected properly. Still get the same error.
Click to expand...
Click to collapse
Does the command
Fastboot devices
Return anything?
What does your HBOOT screen show for the Radio version?
Radar12 said:
Yeah I did the .img file in the same directory, it might be a USB problem although on bootloader it says Fastboot USB so it should be connected properly. Still get the same error.
Click to expand...
Click to collapse
Could be a corrupt download of vivo_downgrade.img
md5sum: 47ba3561beb359fd534b89bacb6fd096
tpbklake said:
Does the command
Fastboot devices
Return anything?
What does your HBOOT screen show for the Radio version?
Click to expand...
Click to collapse
No, it doesn't return anything. And how do you check for the radio version?
Radar12 said:
No, it doesn't return anything. And how do you check for the radio version?
Click to expand...
Click to collapse
The radio version is listed on the HBOOT screen.
Ok, so you put the phone FASTBOOT USB mode, but the command fastboot devices doesn't return anything, right?
Do you have another cable or USB port to try?
Radar12 said:
No, it doesn't return anything. And how do you check for the radio version?
Click to expand...
Click to collapse
Can you post a screenshot of your fastboot command, and let us know what your fastboot directory contains?
tpbklake said:
The radio version is listed on the HBOOT screen.
Ok, so you put the phone FASTBOOT USB mode, but the command fastboot devices doesn't return anything, right?
Do you have another cable or USB port to try?
Click to expand...
Click to collapse
I think I listed the Radio version at the top, correct me if it's the wrong one.
I tried using another port but I keep getting the same error, and I don't have another cable on me.
Radar12 said:
I think I listed the Radio version at the top, correct me if it's the wrong one.
I tried using another port but I keep getting the same error, and I don't have another cable on me.
Click to expand...
Click to collapse
Ok I wasn't sure if that was before or after you tried to run the RUU?
tpbklake said:
Ok I wasn't sure if that was before or after you tried to run the RUU?
Click to expand...
Click to collapse
After running the RUU, anyway to check for the old one?
Radar12 said:
After running the RUU, anyway to check for the old one?
Click to expand...
Click to collapse
That fact that your phone is booting is a good sign and the radio version is higher than the one in the RUU you tried to run, so that is good.
tpbklake said:
That fact that your phone is booting is a good sign and the radio version is higher than the one in the RUU you tried to run, so that is good.
Click to expand...
Click to collapse
Do you know of any other way to get back to S-ON that doesn't require using the fastboot commands? None of the methods I've used so far have worked and I'm kind of stuck now.
Radar12 said:
Do you know of any other way to get back to S-ON that doesn't require using the fastboot commands? None of the methods I've used so far have worked and I'm kind of stuck now.
Click to expand...
Click to collapse
You can try running this RUU
http://d-h.st/6Ri
That should at least get you a phone that will boot.
tpbklake said:
You can try running this RUU
http://d-h.st/6Ri
That should at least get you a phone that will boot.
Click to expand...
Click to collapse
Will give it a try but should I flash this using the method I used initially or copying the .zip to the SD card?
Radar12 said:
Will give it a try but should I flash this using the method I used initially or copying the .zip to the SD card?
Click to expand...
Click to collapse
If you know how to extract the ROM.zip from the RUU and then copy that to your SD card as a PG32IMG.zip then I would try that method.
tpbklake said:
If you know how to extract the ROM.zip from the RUU and then copy that to your SD card as a PG32IMG.zip then I would try that method.
Click to expand...
Click to collapse
Thanks a lot! Phone is back up and running again, appreciate the help.
OK, so I tried using the S-ON method from here http://forum.xda-developers.com/showpost.php?p=15732727&postcount=14 again.
This time I got up to step 3b, but I don't know where the 'sdk hboot' folder is supposed to be located. Any help with this?
bricked my htc one trying to flash an ruu and computer gliched. can get into fast boot and it displays *tampered* *relocked* and *security warning*.
tried to re-up the ruu and says 12 signatures failed or something. any help would be much apriciated. and i cannot connect with adb because i was trying to get rid of cm10 and for some reason i cannot connect to adb with cm10. now when i reboot phone just goes right into bootloader/fastboot. tried to flash a recovery did not work. PLEASE HELP!
thanks in advance.
bk73w said:
bricked my htc one trying to flash an ruu and computer gliched. can get into fast boot and it displays *tampered* *relocked* and *security warning*.
tried to re-up the ruu and says 12 signatures failed or something. any help would be much apriciated. and i cannot connect with adb because i was trying to get rid of cm10 and for some reason i cannot connect to adb with cm10. now when i reboot phone just goes right into bootloader/fastboot. tried to flash a recovery did not work. PLEASE HELP!
thanks in advance.
Click to expand...
Click to collapse
do you have s-off? you can only flash a RUU with s-off...
How exactly did the computer glitch? Calm down, if you can get into the bootloader which I assume you can (as you can see the tampered etc tags) then it's still salvageable. As the person above asked, do you have s-off?
postfatal said:
How exactly did the computer glitch? Calm down, if you can get into the bootloader which I assume you can (as you can see the tampered etc tags) then it's still salvageable. As the person above asked, do you have s-off?
Click to expand...
Click to collapse
nope still got it to work though. was very shocked. bootloader worked, was locked, and s-on. could not do ruu so i found a stock rom i ran it once got a security issue then manually typed it in something like fastboot flash image XXX.zip and got another thing 12 security signature or something other, ran it again imediatelly <did not close command prompt and left phone with the htc emblem on there> with the same command and surprisingly it worked!
Unlock then reflash a recovery
Sent from my HTC One using xda app-developers app
Yep, that should do it since you unlock and flash from the bootloader.
Bseagull said:
Yep, that should do it since you unlock and flash from the bootloader.
Click to expand...
Click to collapse
it's weird tho, because it was "relocked" and S-ON so I dont even know how it worked.
Guys i could really use some help i'll buy you a beer just tell me where to send the money
So as you'll see below i am unlocked with s-on
***TAMPERED***
***UNLOCKED***
m7_WLS PVT SHIP S-ON RH
HBOOT-1.56.0000
OpenDSP-v32.120.274.0909
os-4.06.651.4
eMMC-boot 2048MB
Jan 23 2014, 22:11:35.0
Using CWM and TWRP - sometimes one works and sometimes one doesnt
Using adapter to 16gb jump drive (to install roms using recovery)
My trouble is that every rom i've installed has left me in a boot loop. sometimes the rom will load, sometimes i wont make it past the lockscreen, the time varies but never more than a few minutes and not once have i had a connection - no service, no 3g , 4g wifi or anything.
I've looked into acquiring S-OFF, but for hboot 1.56 im not sure.
firewater requires the internet connection and seeing how i can barely keep my phone from bootlooping... this has been two days now and im in desperate need for my phone.
what do i need to download/install or research? i wipe every time i flash, i can use adb...
Im fairly savvy enough to use/understand the tools provided to me, i just am at a loss as to what to do now.
I've tried to go to a RUU but between the two versions i tried, neither worked ( i tried with the 'locked' and 'unlocked' )
i used the guru reset (thanks crushalot) for CID SPCS_001 and it did load but again i had no service and the phone would restart every few minutes. I used the htc all in one tool (thanks hasoon) to push revone - never got anywhere with that at all - moonshine and rumrunner also did not work.
Heres the list of roms ive tried already by using both twrp and cwm. these are zips located on my 16gb flashdrive attached using an adapter. the roms normally load and give successful messages but then when loading either fail or only loop:
forgive me for not being able to remember who to thank for these - but thank you all for your hard work and tireless efforts to provide. it doesn't go unnoticed
bigxie_m7_GPe_KRT16S_odexed-signed never loaded
BSC_Tranquil_RLS6_ODEX - The one i FIRST installed did not recognize touch (couldnt get past the lockscreen)
Guru_Reset_M7_Sprint_1.31.651.2 worked but no service and looped
m7spr-RootBox-JB-houstonn-20130721 looped and no service
onedroid-m7_signed_012614_152440 never loaded
pa_m7spr-3.65-20130709 never loaded
Sprint_HTC_One_m7wls_1.29.651.10_RUU never loaded
Sprint_HTC_One_m7wls_3_04_651_2_RUU never loaded
Sprint_KitKat_ReBase_1.4 never loaded
sprinthtcone_signed_020214_4.06.651.4_kitkat never loaded
viperROM_One_v1.1.0
bootscreen loop
At this point if someone could show me how to just return to stock and have service I'd be thrilled. thanks guys!
But if i could get a stable version of ARHD for sprint that'd be cool too.
crhoppi said:
Guys i could really use some help i'll buy you a beer just tell me where to send the money
So as you'll see below i am unlocked with s-on
***TAMPERED***
***UNLOCKED***
m7_WLS PVT SHIP S-ON RH
HBOOT-1.56.0000
OpenDSP-v32.120.274.0909
os-4.06.651.4
eMMC-boot 2048MB
Jan 23 2014, 22:11:35.0
Using CWM and TWRP - sometimes one works and sometimes one doesnt
Using adapter to 16gb jump drive (to install roms using recovery)
My trouble is that every rom i've installed has left me in a boot loop. sometimes the rom will load, sometimes i wont make it past the lockscreen, the time varies but never more than a few minutes and not once have i had a connection - no service, no 3g , 4g wifi or anything.
I've looked into acquiring S-OFF, but for hboot 1.56 im not sure.
firewater requires the internet connection and seeing how i can barely keep my phone from bootlooping... this has been two days now and im in desperate need for my phone.
what do i need to download/install or research? i wipe every time i flash, i can use adb...
Im fairly savvy enough to use/understand the tools provided to me, i just am at a loss as to what to do now.
I've tried to go to a RUU but between the two versions i tried, neither worked ( i tried with the 'locked' and 'unlocked' )
i used the guru reset (thanks crushalot) for CID SPCS_001 and it did load but again i had no service and the phone would restart every few minutes. I used the htc all in one tool (thanks hasoon) to push revone - never got anywhere with that at all - moonshine and rumrunner also did not work.
Heres the list of roms ive tried already by using both twrp and cwm. these are zips located on my 16gb flashdrive attached using an adapter. the roms normally load and give successful messages but then when loading either fail or only loop:
forgive me for not being able to remember who to thank for these - but thank you all for your hard work and tireless efforts to provide. it doesn't go unnoticed
bigxie_m7_GPe_KRT16S_odexed-signed never loaded (GSM rom I'm guessing)
BSC_Tranquil_RLS6_ODEX - The one i FIRST installed did not recognize touch (couldnt get past the lockscreen)
Guru_Reset_M7_Sprint_1.31.651.2 worked but no service and looped
m7spr-RootBox-JB-houstonn-20130721 looped and no service
onedroid-m7_signed_012614_152440 never loaded
pa_m7spr-3.65-20130709 never loaded
Sprint_HTC_One_m7wls_1.29.651.10_RUU never loaded
Sprint_HTC_One_m7wls_3_04_651_2_RUU never loaded
Sprint_KitKat_ReBase_1.4 never loaded
sprinthtcone_signed_020214_4.06.651.4_kitkat never loaded
viperROM_One_v1.1.0
bootscreen loop
At this point if someone could show me how to just return to stock and have service I'd be thrilled. thanks guys!
But if i could get a stable version of ARHD for sprint that'd be cool too.
Click to expand...
Click to collapse
My guess is you tried to install a GSM rom which messed up your parttions.
Use this guide to fix
Use the 4.06 s-on firmware and when you get to step 8 refer to 8a (adb push a Sprint 4.06.651.4 sense rom to your device) once you are up and running you can flash any Sprint 4.06.651.4 rom.
Any questions PM or post here
My guess is you tried to install a GSM rom which messed up your parttions.
Use this guide to fix
Use the 4.06 s-on firmware and when you get to step 8 refer to 8a (adb push a Sprint 4.06.651.4 sense rom to your device) once you are up and running you can flash any Sprint 4.06.651.4 rom.
Any questions PM or post here
Click to expand...
Click to collapse
So here's what i did.
Fastboot oem lock - Works
Fastboot oem rebootRUU - Works
Fastboot flash zip firmware.zip (s-on 4.06.651.4_firmware.zip) - Works!!
Fastboot reboot-bootloader - Works
Fastboot flash unlocktoken Unlock_code.bin -Works
Fastboot erase cache - Works
Fastboot flash recovery recovery-clockwork-6.0.4.3-m7spr.img -Works
>Go into Recovery
>Sideload
(CMD)
adb kill-server -Works
adb usb -Works
adb sideload sprintkitkat.zip Works!! (renamed from sprinthtcone_signed_020214_4.06.651.4_kitkat)
Reboot - crosses fingers!!
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
...Fail. Bootloop again! It recognizes touch, but the home screen reverts back to the green HTC logo, and then restarts.
crhoppi said:
So here's what i did.
Fastboot oem lock - Works
Fastboot oem rebootRUU - Works
Fastboot flash zip firmware.zip (s-on 3.04.651.2_firmware.zip) - Works!!
Fastboot reboot-bootloader - Works
Fastboot oem unlocktoken Unlock_code.bin -Works
Fastboot erase cache - Works
Fastboot flash recovery recovery-clockwork-6.0.4.3-m7spr.img -Works
>Go into Recovery
>Sideload
(CMD)
adb kill-server -Works
adb usb -Works
adb sideload sprintkitkat.zip Works!! (renamed from sprinthtcone_signed_020214_4.06.651.4_kitkat)
Reboot - crosses fingers!!
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
...Fail. Bootloop again! It recognizes touch, but the home screen reverts back to the green HTC logo, and then restarts.
Click to expand...
Click to collapse
It says you used the 3.04.651.2 firmware..it would not be possible for you to flash the 3.04 firmware because you are s-on your phone wont allow it.
Or if that was a typo and you did indeed use the correct firmware you most likely got an error and it didn't finish flashing.
Or the rom was a bad download.
I noticed that you sideloaded a Rom and flashed after the RUU? Did you flash the boot.img found in the zip of the Rom you flashed?
Sent from my HTC One using xda-developers app
Dang i dont know since i named it firmware. I knew i had to get the 4.06, maybe i made a typo. nonetheless i dl now and going to follow the exact process again.
[/I]
rickyg87 said:
I noticed that you sideloaded a Rom and flashed after the RUU? Did you flash the boot.img found in the zip of the Rom you flashed?
Sent from my HTC One using xda-developers app
Click to expand...
Click to collapse
Sideloaded a rom yes, im not using an ruu, (although if i could i would use an ruu but i have yet to make it work without error maybe due to my version) but if i was, flash what after? if unzip a rom and find the boot.img should i flash that?
I feel that the fact my connection is gone; cell,3g 4g wifi - that it means something much more devastating has happened. I rooted an evo years ago and i remember finding problems like this that refer to wimax and rsa keys. Anyway. ill post more info once i figure out EXACTLY which firmware i install this time.
BD619 said:
It says you used the 3.04.651.2 firmware..it would not be possible for you to flash the 3.04 firmware because you are s-on your phone wont allow it.
Or if that was a typo and you did indeed use the correct firmware you most likely got an error and it didn't finish flashing.
Or the rom was a bad download.
Click to expand...
Click to collapse
Alright. Using the correct firmware 4.06 this time and it finished and gave a success message, afterwards i adb sideload through twrp this ROM Sprint-HTCONE_Sense-4.4.2.zip found here on xda http://forum.xda-developers.com/showthread.php?t=2633129 and then i extracted the boot.img found in the ROM. I used fastboot flash boot boot.img and had success. At reboot... Failure looms again.
Described as Odexed/Rooted
I'm wondering whats happening. at the lockscreen i open and see this message: "process htc.dialer.com isnt working would you like to.." then it gives me a green htc logo and whit background. at the lockscreen i see that i have no signal. seems as though i am missing vital pieces of the puzzle.
crhoppi said:
Alright. Using the correct firmware 4.06 this time and it finished and gave a success message, afterwards i adb sideload through twrp this ROM Sprint-HTCONE_Sense-4.4.2.zip found here on xda http://forum.xda-developers.com/showthread.php?t=2633129 and then i extracted the boot.img found in the ROM. I used fastboot flash boot boot.img and had success. At reboot... Failure looms again.
Described as Odexed/Rooted
I'm wondering whats happening. at the lockscreen i open and see this message: "process htc.dialer.com isnt working would you like to.." then it gives me a green htc logo and whit background. at the lockscreen i see that i have no signal. seems as though i am missing vital pieces of the puzzle.
Click to expand...
Click to collapse
Hmmm the latest firmware does not contain a radio get the latest here see if it helps
http://forum.xda-developers.com/showthread.php?t=2406330
Flash in recovery I'm pretty sure
Update added that step to the guide I forgot all about the radio not being included
BD619 said:
Hmmm the latest firmware does not contain a radio get the latest here see if it helps
http://forum.xda-developers.com/showthread.php?t=2406330
Flash in recovery I'm pretty sure
Click to expand...
Click to collapse
:good::good::victory::victory:
Well you're a damn genius sir. This fixed my problem immediately Thank you now to return three days worth of phone calls. wheww :victory:
crhoppi said:
:good::good::victory::victory:
Well you're a damn genius sir. This fixed my problem immediately Thank you now to return three days worth of phone calls. wheww :victory:
Click to expand...
Click to collapse
Lol glad you are up and running again
Now S-OFF that b***h so you won't have to do so much work if it gets messed up again
BD619 said:
Lol glad you are up and running again
Now S-OFF that b***h so you won't have to do so much work if it gets messed up again
Click to expand...
Click to collapse
YES! I used firewater (thanks to the developer) and it was simple! It also removed the ***Tampered*** flag.
Cheers! Have a beer on me.
crhoppi said:
YES! I used firewater (thanks to the developer) and it was simple! It also removed the ***Tampered*** flag.
Cheers! Have a beer on me.
Click to expand...
Click to collapse
Good to know Firewater works
Thanks for the beer Cheers
BD619 said:
Good to know Firewater works
Thanks for the beer Cheers
Click to expand...
Click to collapse
Just out of curiosity how would i go about installing a ROM that isnt 4.06, downgrading to use ROMs, like Viperone or Paranoid Android?
:good::good::good:
crhoppi said:
Just out of curiosity how would i go about installing a ROM that isnt 4.06, downgrading to use ROMs, like Viperone or Paranoid Android?
:good::good::good:
Click to expand...
Click to collapse
You can use this guide to go back to JB since you are s-off now
one pmenRig
BD619 said:
Hmmm the latest firmware does not contain a radio get the latest here see if it helps
Flash in recovery I'm pretty sure
Update added that step to the guide I forgot all about the radio not being included
Click to expand...
Click to collapse
I've finally got this far and soooo close to fixing my device. Can you please tell me the steps to properly update the radio on the 4.4.2?
I am using TWRP recovery, Thank you
(?What commands go here?) 1.00.20.1108_3.05.651.5_radio.zip
Amir501 said:
I've finally got this far and soooo close to fixing my device. Can you please tell me the steps to properly update the radio on the 4.4.2?
I am using TWRP recovery, Thank you
(?What commands go here?) 1.00.20.1108_3.05.651.5_radio.zip
Click to expand...
Click to collapse
Flash the radio from recovery
If you have not booted to rom yet type
adb push 1.00.20.1108_3.05.651.5_radio.zip /sdcard/
souvee was
BD619 said:
Flash the radio from recovery
If you have not booted to rom yet type
adb push 1.00.20.1108_3.05.651.5_radio.zip /sdcard/
Click to expand...
Click to collapse
I'm kinda afraid to mess things up again
I am in the main menu of TWRP v2.6.3.0.
The radio.zip is in my platform tools folder.
Where must I go to flash it now
Sorry for the noob questions. I've been at this for atleast 15 hours lol
Amir501 said:
I'm kinda afraid to mess things up again
I am in the main menu of TWRP v2.6.3.0.
The radio.zip is in my platform tools folder.
Where must I go to flash it now
Sorry for the noob questions. I've been at this for atleast 15 hours lol
Click to expand...
Click to collapse
Boot to recovery and type
adb push filename.zip /sdcard/
Once the cmd window says it's done find the zip and flash
which dobtabe
BD619 said:
Boot to recovery and type
adb push filename.zip /sdcard/
Once the cmd window says it's done find the zip and flash
Click to expand...
Click to collapse
Thank you very much for your help my friend, Your guide helped me a lot and the radio was the missing piece to my puzzle. It's fixed now!!!!
Amir501 said:
Thank you very much for your help my friend, Your guide helped me a lot and the radio was the missing piece to my puzzle. It's fixed now!!!!
Click to expand...
Click to collapse
You are very welcome, glad you got it working enjoy
Hello,
Currently I am running a converted GPE M7 and wanted to revert to stock ROM. But right after I changed my CiD from GOOGL001 to 11111111 the phone stopped getting recognized in fastboot mode (it gets recognized when booted normally). Can anyone help me solve this issue?
I have tried numerous guides on how to solve this, no luck. Tried reinstalling drivers, HTC sync drivers (removed sync), manually, nothing, phone shows a yellow exclamation mark in device manager. Using a USB2 port btw.
I am running win8.1 x64. Before it worked flawlessly. Now nothing... So can anyone help me with solving this and getting back stck ROM?
Phone is s-off, unlocked, rooted btw
Thanks all
1Scotty1 said:
Hello,
Currently I am running a converted GPE M7 and wanted to revert to stock ROM. But right after I changed my CiD from GOOGL001 to 11111111 the phone stopped getting recognized in fastboot mode (it gets recognized when booted normally). Can anyone help me solve this issue?
I have tried numerous guides on how to solve this, no luck. Tried reinstalling drivers, HTC sync drivers (removed sync), manually, nothing, phone shows a yellow exclamation mark in device manager. Using a USB2 port btw.
I am running win8.1 x64. Before it worked flawlessly. Now nothing... So can anyone help me with solving this and getting back stck ROM?
Phone is s-off, unlocked, rooted btw
Thanks all
Click to expand...
Click to collapse
what is the bootloader version?
alray said:
what is the bootloader version?
Click to expand...
Click to collapse
If you mean hboot, it is 1.44
1Scotty1 said:
If you mean hboot, it is 1.44
Click to expand...
Click to collapse
hboot 1.44 isn't compatible with windows 8.1 hence why fastboot doesn't work but everything else is fine (detected when booted but not detected when in bootloader)
Use win 7 or try this walkaround
alray said:
hboot 1.44 isn't compatible with windows 8.1 hence why fastboot doesn't work but everything else is fine (detected when booted but not detected when in bootloader)
Use win 7 or try this walkaround
Click to expand...
Click to collapse
I feel so stupid right now.... I thought I had 1.54... Will try it, thanks
alray said:
hboot 1.44 isn't compatible with windows 8.1 hence why fastboot doesn't work but everything else is fine (detected when booted but not detected when in bootloader)
Use win 7 or try this walkaround
Click to expand...
Click to collapse
I tried the workaround, didnt work and all PCs at home run WIN8.1... what do you suggest?
1Scotty1 said:
I tried the workaround, didnt work and all PCs at home run WIN8.1... what do you suggest?
Click to expand...
Click to collapse
You can use Ubuntu on your computer without installing it, go to ubuntu website, download the iso and burn it on a disc. Boot your computer from the disc, select "try ubuntu". Once booted in ubuntu install android tools and flash your ruu.zip.
alray said:
You can use Ubuntu on your computer without installing it, go to ubuntu website, download the iso and burn it on a disc. Boot your computer from the disc, select "try ubuntu". Once booted in ubuntu install android tools and flash your ruu.zip.
Click to expand...
Click to collapse
Ok, I will do the LiveUSB with Ubuntu a try it like that, many thanks
1Scotty1 said:
Ok, I will do the LiveUSB with Ubuntu a try it like that, many thanks
Click to expand...
Click to collapse
can you post the output of "fastboot getvar all" (remove imei and s/n)
what ruu are you planning to use?
alray said:
can you post the output of "fastboot getvar all" (remove imei and s/n)
what ruu are you planning to use?
Click to expand...
Click to collapse
will post the output, once I get Ubuntu upa dn running, as I cant get any fastboot commands to work now
I want to use the stock RUU, I want to return my phone to stock, but of course the RUU must be compatible with my CiD and MiD, I believe
1Scotty1 said:
will post the output, once I get Ubuntu upa dn running, as I cant get any fastboot commands to work now
I want to use the stock RUU, I want to return my phone to stock, but of course the RUU must be compatible with my CiD and MiD, I believe
Click to expand...
Click to collapse
and what was your stock CID / MID?
alray said:
and what was your stock CID / MID?
Click to expand...
Click to collapse
If I remember correctly, it was HTC__032 and PN0710000
@alray - I was trying it in ubuntu (14.04 version), but couldnt get very far... I couldnt install adb and fastboot
In the terminal I used these commands one by one:
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update
sudo apt-get install android-tools-adb android-tools-fastboot
And after the last one it said - unable to locate package android-tools-adb etc.
After that, I am lost...
EDIT: I also tried Ubuntu 12.04 but there was no option to "Try without installing"
@alray - Ignore my previous post, I FINALLY made it work. The problem with the 12.04 version was, that I downloaded the wrong one, I downloaded the "alternate" version, not the "desktop" version, now it is working flawlessly and ADB+Fastboot are running, phone is detected in fastboot, so today I will be flashing back to stock
Many Thanks for your help and guidance
1Scotty1 said:
@alray - Ignore my previous post, I FINALLY made it work. The problem with the 12.04 version was, that I downloaded the wrong one, I downloaded the "alternate" version, not the "desktop" version, now it is working flawlessly and ADB+Fastboot are running, phone is detected in fastboot, so today I will be flashing back to stock
Many Thanks for your help and guidance
Click to expand...
Click to collapse
Don't forget that since you are using Ubuntu, you will have to use an older ruu.zip because newer ruu (7.xx.xxx.x) will only flash using htc_fastboot.exe which is Windows only. No problem flashing older RUU using the standard fastboot from ubuntu e.g. 1.28.401.7 or 4.19.401.9
alray said:
Don't forget that since you are using Ubuntu, you will have to use an older ruu.zip because newer ruu (7.xx.xxx.x) will only flash using htc_fastboot.exe which is Windows only. No problem flashing older RUU using the standard fastboot from ubuntu e.g. 1.28.401.7 or 4.19.401.9
Click to expand...
Click to collapse
I have the 1.28.401.7 and I am going to do it right now, wish me luck
@alray - done, succesfully reverted to stock HTC Thanks again