Database Develop

wlan filesharing through router

hey there,
im using my day off to play a little bit with my td. now i would like to build network connection via wlan through my router to my desktop so i can move files from pc to ppc and vica versa. problem is that im not able to see my desktop on the phone, nor to see my phone on the desktop. i cant even get into any filesharing option(s) on the diamond
since now im using resco explorer...
help needed

What have you tried so far?
In Resco Explorer, try Menu > File > Network > Map Drive and then enter the computer name and share in the format \\computer\share.
You may find there are no computers/shares listed in the bottom window (hence why you have to manually enter it above) however in my case I'd always put this down to me using Samba on Linux but perhaps it just doesn't support this sort of network 'browsing' to find what shares are available.
Mathew

yeehaaw thanks a lot! that made it. still a a bit uncomfortable but i think once added i dont have to reenter the path.
so now i just have to figure out how to make this work vice versa... wonder if it is as easy as it sounds i'll let you know
thanks so far!!

I don't think it's possible the other way round... but that shouldn't matter as from your phone you've got two-way traffic right now.
You're right about not needing to reenter the name - just hit My Device at the top (or traverse up to the tree to the top) and you'll find a My Network at the same level - inside here is your previously mapped share(s).
Mathew

Hi,
I have tried to map my Vista laptop via Resco as stated above but comes up with error :
Cannot map network path, network resorce cannot be found.....
As I dont fully understand what I am doing can someone do a walkthough please?
I have tried to search the forum, but can get it to search keywords.
Thanks in advance
PS Can I map the internal storage via windows explorer?

You guyz should try Total Commander, it has a plugin for LAN. Works very good, even transferring big files. Running Vista Ultimate.
Greetings.

Thanks Sergio for your reply, I have total commander but have no idea how to use it, Can you offer any step by step instructions to connect to my vista laptop.
Thanks

creeky said:
Thanks Sergio for your reply, I have total commander but have no idea how to use it, Can you offer any step by step instructions to connect to my vista laptop.
Thanks
Click to expand...
Click to collapse
Sure no prob do this:
-Turn your WiFi connection. (usually best performance settings works best)
-Access Total Commander.
-In the main page, where you see Internal Storage and device. You should see a folder named \\Plugins. Access this folder.
-Then access the folder named LAN.
-Then access the <new server> option.
-Name your connection.
-When asked for the server name, type in the computer you want to access (you can find the name by going in your PC to the network file and check which files are shared on your computer, click on them and you should get the name of the server "pic attached")
-You are done enjoy.
-Vista kicks assss.
Greetings to all.

Thanks Sergio,
I have followed your steps,Now I can connect to the Laptop folder in the network Directory which is the location \\LAPTOP. I can connect fine but the folders are not visable so appears to be empty in Total Commander which we know its not.
I also have a NAS drive which I can connect to following your steps with ease. Trouble is I dont want to use this as it is by Back up drive.
Do you have any ideas?
Thanks again.
Dan

How to access Home Network (in Vista) from my Tilt?

I have my Tilt connected to the internet @ home via my Router using wifi..I have some files (mp3s, videos) shared on the network via the router..how do I access these files from my tilt? Do I need a special program or what?

nobody knows how? I just want to be able to access my shared folders on my home pc through wifi..I can't seem to get it..

I personally like resco file explorer. Unfortunatly haven't been able to use it to get on my Windows 7 computer though

I have resco explorer 2008 and I go browse under NETWORK and nothing shows up..do i need to configure anything?

Have you looked at Remote Desktop ?
http://handheld.softpedia.com/get/System-Utilities/Communications/Remote-Desktop-9664.shtml

http://www.vmobilesoftware.com/NetworkBrowser.htm
I am glad you asked i have always wanted to do this too. and i just found out how.
crap it is pay ware if anyone can find a similar thing that is freeware please post.

Ok I just found out why it wasn't letting me view the shared computer...it was Norton360 firewall..as soon as I disabled it..it let me access the files from the pc on my phone..my question now is how do i tell the firewall to let me see the files..because I do want it on..but still want to access my files.

euklid, are you behind a router to the internet? if so you basically have a hardware firewall (it doesnt pass on traffic to ports unless u specify it to do so) Norton is crap imo.... Windows Firewall does what it needs to do...

i use network folder plugin. cant remember where to get it from i've used it on wizard hermes and now the tilt. it does exactly what u want. it installs in start>settings>connections just go in there u just have to map it to ur shared folders.

Transfer Files using Wifi + Android Name

Hi, i`ve been looking for a way to transfer files to the phone without using the USB cable.
I found: OnAir which does not work and SwiFTP which works but...
- i`m using Conectify to share my laptops internet connection. This in turn offers IP`s with DHCP.
Is there a way to name your phone to something fixed so that i can use it's name to connect?
If you have any other tips on how to do this, please feel free to let me know

qiuness said:
Hi, i`ve been looking for a way to transfer files to the phone without using the USB cable.
I found: OnAir which does not work and SwiFTP which works but...
- i`m using Conectify to share my laptops internet connection. This in turn offers IP`s with DHCP.
Is there a way to name your phone to something fixed so that i can use it's name to connect?
If you have any other tips on how to do this, please feel free to let me know
Click to expand...
Click to collapse
you can use WebSharing, connect using IP address + port number..

qiuness said:
Hi, i`ve been looking for a way to transfer files to the phone without using the USB cable.
I found: OnAir which does not work and SwiFTP which works but...
- i`m using Conectify to share my laptops internet connection. This in turn offers IP`s with DHCP.
Is there a way to name your phone to something fixed so that i can use it's name to connect?
If you have any other tips on how to do this, please feel free to let me know
Click to expand...
Click to collapse
on air does work fine on both 5.0.7 and froyo for me.

I suppose you're talking about Windows network. Is the phone rooted or not?
Non-rooted have no such option, but can use FTP. If you want to address it by a name - install DynDNS on the phone.
Rooted can change hostname to whatever you like (look up my thread about it in Development section - but it doesn't show on Windows network, since it's not NetBIOS name, it needs DNS server to be addressed) and/or install Samba+Netbios (look up Samba thread in Android General section, this one shows your phone as a computer on the Windows network with an SDCARD share, but it's a bit quirky - slows down when phone goes into sleep). Both things require interaction with O/S on a level of browsing system dirs, executing system commands and changing system text files. If you're not comfortable with it - I don't suggest trying.

I would just use ES File Explorer and pull the files from your Windows shares that you want rather than trying to go through all of the trouble to push a file to your phone.

Estrongs File Explorer does work very well browsing windows/smb shares over wifi. Astro can do this as well as an option for sftp for connecting to your linux box. As for a static IP you can do this manually from the wifi options in the phone. Or a nice app was made called WiFi Static, and is available free from the market.

A bit of a different choice, but Dropbox is free and can share files between any number of devices, in the cloud.

Astro SMB

How to use Astro SMB module? I cant connect to my PC with it .. I am currently using another SMB app called File Expert and it works fine.. I want to try Astro SMB module since I just loved its file manager.. Can anybody tell me how to set up astro?

Are you working with Windows Vista or 7?
In that case, newer SMB underlying protocol used by those systems might explain it, your client needs to support it.

Yeah I am using 7..
So, astro wont work?

You can do a check - perform this:
http://www.tannerwilliamson.com/2009/09/windows-7-seven-network-file-sharing-fix-samba-smb/
And try to connect. If it works - then it's the only way, due to the reason I wrote above. It's downgrading the share security, but I guess for most home networks it's not important at all.

I'm running several shares on my network, most are linux smb shares but there are a couple windows shares as well. Astro refuses to access any of them.
I installed estrong file explorer, all shares are visible and I have access to all of them. So my suggestion is to give estrong a shot. Free app with no ads
________________________
N1 w/ XDA App

Hi,
I've Windows Xp, but Astro SMB doesn't work. Instead, Estrongs File Explorer it's able to see my pc, to connect my galaxy s with it and to let me see on the phone shared document.
But I prefer Astro SMB, so anyone can tell me how to configurate Astro to make it work?
Thanks

Look at the link posted above.

sorry, but isn't the link above only for windows 7?
I've got windows xp

The link above is for Windows 7 and Vista, indeed. Sorry, I kinda missed that part of your post.
If Astro SMB doesn't work with your Windows XP - there are 2 options: 1) if you have a corporate laptop or something - it might be set to use the same sharing security as Win7 and Vista, and then you need to do the same thing as described in the link. 2) if not - then it's probably some problem with configuration, and people might be able to help you with it. What exactly are you trying to do, and what is the result? Please describe.

no, my pc isn't a corporate laptop but an home pc.
I want to create a network between my galaxy s with android and my home pc, using my router wifi.
So i've installed smb module for Astro. Then i've selected new network--->smb. After that step, the phone ask me some information. For exactly:
-Label
-Server
-Domain
-Shared folder
-User
-Password
I've try to set as Server the IP of my pc and as user and password that one I use to access on Windows Xp. But Astro gives me the error: "unknown user or bad password".
I'd like that someone who use Astro for networking with windows Xp would tell me how to configure the net.
With Estrongs Explorer files i had no problems: when i've selected "lan", the software has searched automatically avaiable devices and found my pc with his IP. Then i've selected "connect" and Shared folders appared on my phone...

You don't need to enter user credentials to connect to common share, if I'm not mistaken. Try without username and password, only server and shared folder.

Jack_R1 said:
You don't need to enter user credentials to connect to common share, if I'm not mistaken. Try without username and password, only server and shared folder.
Click to expand...
Click to collapse
In this way it gives another error: SocketTimeoutException: socket is not connected

I've finally decided to use ES file explorer.
Ty however

Turn off simple file sharing in any explorer window. Folder, options, third tab (forget label), drill to bottom and deselect simple file sharing. Check firewall... and you should have your shares pw protected. I usually just go to my serger and put c$ in the folder field.
Sent from my Nexus One using XDA App

Finally worked
So finally i was able to share files between ASTRO & my Win7 Ulti laptop.
Assuming your settings at PC end are correct, here's what you need to do in ASTRO,
Under, Networks>New>SMB, Just fill in the..
Server: <your pc local ip, say, 192.168.1.2>
Username: Guest
Password: <blank>
I filled only the above mentioned fields, leaving everything else blank.
The above setting will work if you have simple sharing enabled on your pc with no username/password, as it was in my case or you may use the username/password for your window's login. Also see that the file/folder you are trying to share has atleast Read permission for 'Guest' account.
It should work now.
But i encountered a new problem now, i was keen to use ASTRO as i thought it will be able to play videos from my PC but when i try to open file using the Video Player, it gives some crashing sort of error & closes. However, i am able to play the same file from my memory card using Video Player.
Any solution??

Use Samba mount command from Development section, to mount your PC share as a directory under /sdcard.

I think thats possible only with rooted phones, plz correct me if i am wrong..
My phone is not rooted.

I can't verify it, but I think mount should work with non-rooted phones too, as long as you have busybox and your kernel supports CIFS (it's a good question if the stock one does - I believe you're running stock?)...

Jack_R1 said:
I can't verify it, but I think mount should work with non-rooted phones too, as long as you have busybox and your kernel supports CIFS (it's a good question if the stock one does - I believe you're running stock?)...
Click to expand...
Click to collapse
Thanks for your response...
I am not much aware about this, can you help me where to find & how to do this?
Also i have no clue what busybox is.
Thanks again..

J.L.C. said:
I installed estrong file explorer, all shares are visible and I have access to all of them. So my suggestion is to give estrong a shot. Free app with no ads
Click to expand...
Click to collapse
+1
I'm able to connect to all my PCs very quickly and easily. Besides, they are working on Root permissions as well, so this can be a root explorer (currently only CM is supported).

How do I use the Captivate as a WiFi NAS?

I've been using ES File Explorer to transfer files via WiFi to and from the Windows shares in my LAN. This method works flawlessly, but I would prefer to connect my Captivate to the USB charger and access the Internal/External Storage cards from any Windows desktop in my house and use the Windows File Explorer to transfer files to/from the Captivate.
I found and app in the Market called On Air (WiFi Disk) that is supposed to act as a WebDAV server, but I have been unable to get it to work. My understanding was (someone correct me if I'm wrong) that the Windows File Explorer already has a WebDAV client built-in. So given that On Air is some sort of WebDAV server I'd be able to access it from a Windows desktop. I can already ping the IP address of the phone while is running On Air. So I was hopping that while the On Air App was running on the phone I could issue the command -> net use x: \\phone ip address\Resourcename from a Windows desktop and connect the phone as a network drive. The thing is that it's not clear what the "resourcename" is when you use On Air as the WebDAV server. I tried onair and other names as the resourcename, but it did not work. I think that using File Explorer from Windows instead of a browser or a dedicated WebDAV client would be the most convenient way to do file transfers. I also tried Firefox, IE and AnyClient (WebDAV client) to access the On Air share, but was also unsuccessful. I could not find any documentation on how to use On Air, but I assume that is working for some folks.
I guess what I'm looking for is an application that allows me to access the Captivate storage, as it acts as a WiFi NAS, from any Windows desktop attached to my LAN. Or someone with instructions on how to get the On Air app to work so that I can transfer files to/from the Captivate using any Windows desktop in my LAN.

I used FileZilla using FTP. Make sure you use active mode, worked for me. Good luck.

cappysw10 said:
I used FileZilla using FTP. Make sure you use active mode, worked for me. Good luck.
Click to expand...
Click to collapse
Ok, I downloaded FileZilla and when I try to connect to the On Air Server it appears to stablish a session, but it eventually fails. I get the following messages:
Status: Connecting to 192.168.1.112:5548...
Status: Connection established, waiting for welcome message...
Error: Connection timed out
Error: Could not connect to server
Status: Waiting to retry...
Status: Connecting to 192.168.1.112:5548...
Status: Connection established, waiting for welcome message...
Error: Connection timed out
Error: Could not connect to server
I used onair and anonymous as ids and the password number generated by On Air.
What exactly do you mean by making sure that I use Active Mode? I went to the FTP Active settings... what settings should I have there?

Open the Site Manager in FileZilla by either clicking file then site manager or using the shortcut CTRL+s. Here you create a site, or server, to connect to. In the general tab fill out the info from On Air. Use onair as your user and the four digit number that On Air generates as the password.
Now under the tab for transfer setting, you check the active radio button. Once you click connect you should be able to see your Cappy.
Let me know if you still need help.

cappysw10 said:
Open the Site Manager in FileZilla by either clicking file then site manager or using the shortcut CTRL+s. Here you create a site, or server, to connect to. In the general tab fill out the info from On Air. Use onair as your user and the four digit number that On Air generates as the password.
Now under the tab for transfer setting, you check the active radio button. Once you click connect you should be able to see your Cappy.
Let me know if you still need help.
Click to expand...
Click to collapse
Thanks for the help, but I was unable to connect using FileZilla's Site Manager with your instructions.. The version of FileZilla that I downloaded (3.3.4.1) did not have a WebDAV connection type. I tried the FTP option, but I kept getting the message: "Connection established, waiting for welcome message..." What connection option are you using?
After a few trials and errors... I finally connected to the On Air server on the Captivate, but with AnyClient 2.0 using its WebDAV connection type. I'm able to transfer files to/from my Captivate using any Windows desktop in my LAN. File transfers from the Captivate to the desktop are actually pretty fast. Now that I know that the WebDAV server is up and running and accepting connections in the Captivate... tomorrow, if I get a chance, I'll try again to get it to work using the Windows File Explorer.

Ok, I got On Air WebADV working using Windows File Explorer... BUT, only using Windows XP's File Explorer. It "appears" that there is a limitation in the Mini Redirector built-in the File Explorer of Windows 7 that only allows WebADV connection in port 80. The default port of On Air WebADV server is 8880 and there is no (user friendly) option to change this port either in On Air or in the File Explorer of Windows 7. I'll keep looking around to see if there is a way to change (hack) the default port of Windows 7 File Explorer. There is probably a registry entry to change this, but I'm afraid that changing it will break Web connections elsewhere within Windows 7..

tamanaco said:
Thanks for the help, but I was unable to connect using FileZilla's Site Manager with your instructions.. The version of FileZilla that I downloaded (3.3.4.1) did not have a WebDAV connection type. I tried the FTP option, but I kept getting the message: "Connection established, waiting for welcome message..." What connection option are you using?
After a few trials and errors... I finally connected to the On Air server on the Captivate, but with AnyClient 2.0 using its WebDAV connection type. I'm able to transfer files to/from my Captivate using any Windows desktop in my LAN. File transfers from the Captivate to the desktop are actually pretty fast. Now that I know that the WebDAV server is up and running and accepting connections in the Captivate... tomorrow, if I get a chance, I'll try again to get it to work using the Windows File Explorer.
Click to expand...
Click to collapse
Did you change On Air to use FTP protocol? If you tap the icon on the top right it changes protocols. Anyway, glad to see you got it to work.

cappysw10 said:
Did you change On Air to use FTP protocol? If you tap the icon on the top right it changes protocols. Anyway, glad to see you got it to work.
Click to expand...
Click to collapse
Yeap, I tried several protocols, but none work using Win 7 File Explorer because the Map Network Drive Wizard does not allow ftp or http connections to ports other than the default ports. So you can only enter ftp://ipaddress or http://ipaddress. In Windows XP you can enter http://ipaddress:anyport# in the Add Network Place Wizard and it works. XP then prompts you for the id and pw and the folder for the WebDAV server is added under My Network Places in File Explorer. I prefer WebDAV as it is a newer and more flexible protocol than FTP.