I'm using CM10.1 from http://forum.xda-developers.com/showthread.php?t=2300132 and am unsure how to install google apps. I can boot from the sdcard, but I get a bare stock android with no google apps. I don't know how to get into the CWM recovery boot menu to flash them to the card, and I don't know how else to install them.
How do I gapps?
dhasenan said:
I'm using CM10.1 from http://forum.xda-developers.com/showthread.php?t=2300132 and am unsure how to install google apps. I can boot from the sdcard, but I get a bare stock android with no google apps. I don't know how to get into the CWM recovery boot menu to flash them to the card, and I don't know how else to install them.
How do I gapps?
Click to expand...
Click to collapse
Use the cyanoboot menu when booting to get to CWM recovery (hold n when cyanoboot comes up).
Get gapps at goo.im. You need the 20130101-jb version.
Sent from my Nook HD+ running CM10.1 on emmc.
Related
When I have been flashing nightly versions of CM7 on my Nook Color, the gapps will install through CWM and it says successful, but never shows up on the app drawer. Any help would be appreciated.
Specs: Nook Color CM7 Nightly 201
Recovery: CWM SD card bootable
Are you reinstalling the gaaps .zip with each update?
Yeah I have been flashing them after each flash. Still doesnt show up.
Atomsk86 said:
Yeah I have been flashing them after each flash. Still doesnt show up.
Click to expand...
Click to collapse
Gapps won't show up in the app drawer... it runs one time and downloads and installs the apps you pick. I don't recall off the top of my head how to force it to run again after it does it. The information is stored on the data partition so it will not run when flashed with the ROM and there is no reason to flash it with every nightly. The purpose of gapps is only to run the google application selector you got the first time it ran.
Atomsk86 said:
When I have been flashing nightly versions of CM7 on my Nook Color, the gapps will install through CWM and it says successful, but never shows up on the app drawer. Any help would be appreciated.
Specs: Nook Color CM7 Nightly 201
Recovery: CWM SD card bootable
Click to expand...
Click to collapse
You need to flash gapps from the internal CWM, flashing it from a bootable SD CWM doesn't work.
Go into settings and delete the gapps apps, reboot, and reflash.
Sent from my NookColor using xda premium
Ok I'm sorry I figured it out I was being stupid. I kept skipping the sign-in when flashing a new rom. Once signed it it came right up. Turns out the new google apps is a little different install than before. Thanks everybody for your help
I have carbon ROM installed. However the power menu and ROM manager options to reboot to recovery do not work. They just take me to the nook install failed screen. I like to mess with ROMs and I would love to must be able to install ROMs on the fly. I can get into recovery if in install my origal boot SD I used to get cwm into the device. Anyone have any advice for that?
kud0s said:
I have carbon ROM installed. However the power menu and ROM manager options to reboot to recovery do not work. They just take me to the nook install failed screen. I like to mess with ROMs and I would love to must be able to install ROMs on the fly. I can get into recovery if in install my origal boot SD I used to get cwm into the device. Anyone have any advice for that?
Click to expand...
Click to collapse
It is booting to recovery, stock recovery.
If you want CWM or TWRP recovery internally, you must install them. Go to verygreen's emmc CM10.1 thread and he has flashable zips to put one on your internal memory, replacing stock recovery.
Or, as you said, you could just boot to your CWM SD that you used to install Carbon.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
It is booting to recovery, stock recovery.
If you want CWM or TWRP recovery internally, you must install them. Go to verygreen's emmc CM10.1 thread and he has flashable zips to put one on your internal memory, replacing stock recovery.
Or, as you said, you could just boot to your CWM SD that you used to install Carbon.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Yes I have it fixed now. Thanks. Finally can reformat my 4gb sd card back to 32gb
Thanks for the quick reply.
Hi,
I installed CM10.2 on my Nook HD+ but left the stock recovery on. I figured that it would help to reinstall the stock rom if something goes wrong.
Is there a way to install CM10.2 updates on my tablet without removing the stock recovery. The sdcard-based CWM worked on the stock rom but it no longer works on CM10.2. I have tried a couple of recoveries but none of them worked.
Do I have to install a custom recovery on EMMC to be able to do updates? If so, how can I install the custom recovery after installing 10.2?
Any help would be appreciated.
excalibar001 said:
Hi,
I installed CM10.2 on my Nook HD+ but left the stock recovery on. I figured that it would help to reinstall the stock rom if something goes wrong.
Is there a way to install CM10.2 updates on my tablet without removing the stock recovery. The sdcard-based CWM worked on the stock rom but it no longer works on CM10.2. I have tried a couple of recoveries but none of them worked.
Do I have to install a custom recovery on EMMC to be able to do updates? If so, how can I install the custom recovery after installing 10.2?
Any help would be appreciated.
Click to expand...
Click to collapse
Just follow the "Make the CWM sd" guide from here .It works for the cm emmc install also.
Also why would you not flash custom recovery? If something goes wrong or if you want to go back to stock you could just flash the factory stock ROM from the cwm SD you made. You can get it from the same thread.
excalibar001 said:
Hi,
I installed CM10.2 on my Nook HD+ but left the stock recovery on. I figured that it would help to reinstall the stock rom if something goes wrong.
Is there a way to install CM10.2 updates on my tablet without removing the stock recovery. The sdcard-based CWM worked on the stock rom but it no longer works on CM10.2. I have tried a couple of recoveries but none of them worked.
Do I have to install a custom recovery on EMMC to be able to do updates? If so, how can I install the custom recovery after installing 10.2?
Any help would be appreciated.
Click to expand...
Click to collapse
The same CWM SD you used to flash CM10.2 should still work with CM10.2 installed on emmc. You must have somehow modified the original SD. Try making the SD from scratch again. You can keep stock recovery on emmc if you want so that you can easily reset to stock if you want.
But once you have that SD working you can still flash the CWM or TWRP zip to emmc with it, along with the updated CM you wanted to install.
Sent from my Nook HD+ running CM10.1 on emmc.
Hi guys,
I have bought the Nook HD+ and I tried to install CM 10.1 to the Nook by following this one
1. restore the CWM img to the micro SD ( my own is 16Gb one )
2. I did not make a backup in CWM ( the guide didn't say so and Im just a newbie of Android ). After that, I did install CM 10.1 ( downloaded from homepage) zip file, also Goo Apps as well.
Kind of simple one. Now my nook jsut boot in CM 10.1 with the logo and staying at this stage ( without micro SD card). In case I keep the micro SD card inside the Nook, it just continue booting into CWM. I did not do any format option in CWM. Did I make any mistake? What can I do now?
You must do a factory reset with CWM after installing CM10.1. You need to get rid of those stock settings.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You must do a factory reset with CWM after installing CM10.1. You need to get rid of those stock settings.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
yep! the problem is even when I choose to install from zip file then I did wipe all setting, clear cache. I still cannot boot into CM 10.1 Now I just can boot into CWM. What can I do now?
I just did it successful. Thank for your supporting
:laugh:
Hi,
Just attempting to upgrade to CM11, and have hit a hurdle at the first step.
Having prompted via the power button to reboot to recovery, the device is now stuck alternating between the default nook load start screen and the cyanboot bootloader logo.
Any ideas please how to force a proper boot either back into the OS or recovery as intended?
Thanks!
skyblueox said:
Hi,
Just attempting to upgrade to CM11, and have hit a hurdle at the first step.
Having prompted via the power button to reboot to recovery, the device is now stuck alternating between the default nook load start screen and the cyanboot bootloader logo.
Any ideas please how to force a proper boot either back into the OS or recovery as intended?
Thanks!
Click to expand...
Click to collapse
At the moment, do you have CyanogenMod installed or the stock ROM? If CM, why not try creating a bootable CWM Recovery on a SD card. Using that SD card (turn Nook off, insert SD card and turn on), boot into CWM Recovery and install EMMC recovery + CM (and optionally Gapps). That should hopefully solve your issue.
You may not be able to boot into CWM Recovery instantly with the bootable CWM Recovery on SD, as newer Nook's often have problems; but keep trying.
All the best.
I'm running CM 10.1.3 at the moment,
Thanks, will try that as I think that's how I originally installed (was a while ago!).
Only issue I might have is that I don't seem to have a 4Gb card around, so may have to purchase one and then get back to you.
Will try with a 32Gb card for now.
Cheers for your help!
skyblueox said:
I'm running CM 10.1.3 at the moment,
Thanks, will try that as I think that's how I originally installed (was a while ago!).
Only issue I might have is that I don't seem to have a 4Gb card around, so may have to purchase one and then get back to you.
Will try with a 32Gb card for now.
Cheers for your help!
Click to expand...
Click to collapse
Of course, you can try with your 32GB SD card; it shouldn't be a major problem, it can still work too. Apologies if it's a silly question, but are you able to boot into CM10.1.3 at the moment? And if you power the Nook off completely, then turn it back on, does it still freeze at boot up?
Also, did you install a newer version of CWM Recovery for CM11, before flashing CM11? If so, that may make it harder for you to boot into a bootable CWM via SD card, as some users are reporting issues. If not, then once you have this issue solved, downloaded and install the latest CWM then try flashing CM11 again; and hopefully you shouldn't have any issues.
All the best.
HiddenG said:
Of course, you can try with your 32GB SD card; it shouldn't be a major problem, it can still work too. Apologies if it's a silly question, but are you able to boot into CM10.1.3 at the moment? And if you power the Nook off completely, then turn it back on, does it still freeze at boot up?
Also, did you install a newer version of CWM Recovery for CM11, before flashing CM11? If so, that may make it harder for you to boot into a bootable CWM via SD card, as some users are reporting issues. If not, then once you have this issue solved, downloaded and install the latest CWM then try flashing CM11 again; and hopefully you shouldn't have any issues.
All the best.
Click to expand...
Click to collapse
Nope, can't boot into 10.1.3, literally all I did was select to reboot into recovery and it locked up in this booting loop without ever being able to load.
I had CWN Recovery 6 and CM11 on the internal memory ready to update, following upgrade instructions here:
http://forum.xda-developers.com/showthread.php?t=2600572
Was I supposed to install the latest CWN Recovery version from the OS rather than from recovery mode?
I've now loaded up my old bootable SD used when first installing 10.1.3 and managed to get into the bootloader.
It says I am in Recovery 6.0.2.8...
How is best to proceed? Try and recover 10.1.3 first or continue trying to update to CM11?
Cheers.
I'm glad you managed to boot back into recovery using your SD card. From here, I'd install CM10.1.3 and install CM11 after; so at least we have the Nook working for certain.
In the bootable SD recovery, install CWM Recovery and CM10.1.3. Then boot into CM, and hopefully that should solve your issue. We can then move forward to CM11.
If you have a Nook HD, download "CWM Recovery" from: http://forum.xda-developers.com/showthread.php?t=2319000 (5th paragraph)
Or if you have a Nook HD+: http://forum.xda-developers.com/showthread.php?t=2263553 (3rd paragraph)
After downloading the CWM Recovery, download CM10.1.3 for either Nook HD (Hummingbird) or Nook HD+ (ovation). Put them both on your internal storage or SD card; and using the recovery you're able to boot into using your SD card, install both the CWM Recovery and CM10.1.3. Eject your SD card, and reboot your Nook. Hopefully you should be able to boot into CyanogenMod; thus solving your issue(s).
Now, we'll concentrate on upgrading to CM11. The guide you're following to update to CM11 is correct, and should be good to go. So, download the latest "recovery image (CWM)" for your device from: http://forum.xda-developers.com/showthread.php?t=2600572 and also download CM11.
Place the "recovery image (CWM)" onto your internal storage/SD card;
Boot into your current recovery, and install the recovery image (similar to how you install CM);
Now reboot your device back into recovery;
Now install CM11 (and gapps if you desire).
That should be it hopefully, and you should be in CM11. Just make sure you install the newer CWM at step 1.
All the best, and I do apologise if I didn't explain everything clearly.