I'm having issues flashing a custom recovery. After booting into the Clockwork Mod recovery (just flashed) I get the error codes:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/command
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
I also only have 118MB of free space on the SD Card (seen through recovery).
So I'm trying to download the stock recovery from
http://forum.xda-developers.com/showthread.php?t=2158763
so that I can flash it to start all over to see if it helps, but ESET is coming up with it as infected with a trojan. I'd like to flash it but I'm not sure if I can trust it...
Any help?
That link downloads a rar archive that contains the stock recovery image plus other stuff. My virus protection also picked it up, but I downloaded and check it out and even had another user flash that recovery image so I am pretty sure the download is not infected.
Alright, I'm going to flash it.
Any ideas on the error codes?
Looks like you got fungi on your recovery. DON'T LET IT GET EXPOSED TO WATER!
lesson learnt.
jags_the1 said:
Looks like you got fungi on your recovery. DON'T LET IT GET EXPOSED TO WATER!
lesson learnt.
Click to expand...
Click to collapse
Well, I'm not going to pretend that I don't have any clue what that meant
Myrloc said:
Alright, I'm going to flash it.
Any ideas on the error codes?
Click to expand...
Click to collapse
Maybe fastboot erase cache. Perhaps reflash and try TWRP recovery.
Any idea which recovery to flash. The file I downloaded came with a bunch to choose from.
Oh yeah, I remember now. I didn't use those because I thought they were labeled weird. Here is a zip that contains the stock recovery.img :
https://dl.dropboxusercontent.com/u/36946918/ResetRecovery.zip
I would just try to reflash a custom recovery.
Go to this thread and get TWRP. Rename the file to twrp.img and place it in the same folder as your fastboot. Your phone should still be in fastboot, if not, get there.
Type: fastboot erase cache
Type: fastboot flash recovery twrp.img
since acipen
I can't flash any other recoveries...
When I try to flash another one, the one with go to the "Entering recovery" screen for several seconds and then turn off.
Myrloc said:
I can't flash any other recoveries...
When I try to flash another one, the one with go to the "Entering recovery" screen for several seconds and then turn off.
Click to expand...
Click to collapse
I sometimes get those error messages when I go from Twrp to Cwm, but after I do a backup or flash something it goes away the next time I boot into recovery.
Sent from my HTC One using xda premium
The other issue is that when I'm backing up in CW, it says:
Backing up system..
Can't mount /system!
Is this a problem or should I ignore it?
I have CW flashed, but now I can't start my phone. Everything's been flashed (data/factory reset, etc.). I don't think I wiped the system, but now I'm not sure. Any help guys? This kind of blows.
Related
so I tried to Root my Dream and choose after a number of failed attempts I have decided to just give up so I want to wipe and restore my phone's OS the factory but when I try though the settings menu the phone restarts then just sits on the "Rodgers" logo for ever so is there anyway to fix that?
Don't give up so soon
I definitely recommend rooting. The rogers firmware sucks by default imo. I did not like my phone at all until I rooted.
Check this guide by HyeProfile, I just used it on a new rogers dream and it worked 100%:
http://forum.xda-developers.com/showthread.php?p=4280573#post4280573
If you really don't want to root, you can follow the steps to try flashing (using the same instructions he gives in that post) with the official rogers radio.img and recovery.img here: http://www.stevebirstok.com/android/losemyroot.zip
well I hate how slow my phone feels so I'm going in for the root again thanks for the push to try again.
ok ran into an issue:
Installing from sdcard...
Finding update package...
E:Can't mount /dev/block/mmcblk0p1 (No such file of directory)
E:Can't mount SDCARD:update.zip
Installation aborted
when trying to apply update.zip
Loading001 said:
ok ran into an issue:
Installing from sdcard...
Finding update package...
E:Can't mount /dev/block/mmcblk0p1 (No such file of directory)
E:Can't mount SDCARD:update.zip
Installation aborted
when trying to apply update.zip
Click to expand...
Click to collapse
that means it can't see your sdcard.
see if dropping into the recovery console(alt+x) and typing
Code:
mount /sdcard
recovery
see if that helps anything since that command will mount your sdcard which it appears to be failing to read.
when I try enter the console all the options are removed form the screen then nothing happens all I see is the yellow text.
The yellow text I'm talking about is the error message I posted.
if you are trying to unroot it, use the same rc package that you use to downgrade it in the bootloader (camera and power) and run the .nbh there
Loading001 said:
ok ran into an issue:
Installing from sdcard...
Finding update package...
E:Can't mount /dev/block/mmcblk0p1 (No such file of directory)
E:Can't mount SDCARD:update.zip
Installation aborted
when trying to apply update.zip
Click to expand...
Click to collapse
Are you sure your sdcard is formatted to FAT32?
I'm going o try that when I get home
ok so it's weird.
E:Multiple firmware images
E:can't store hboot images
E:failure at line 1
write_hboot_image PACKAGE:hboot.img
install aborted
ok so now it just sits on the "Rogers" logo and wont enter any mode (camara+power)
edit: looks like that means I biked the thing hope they will replace it (i'll just blame it on their firmware update thing)
edit2: calling rogers to try get a replacement
will it it read an .nbh in the bootloader?
I don't know how can I test that or see if it will?
I was refering to the dreaimg.nbh from either rc29 or rc7 that you use to downgrade your phone in order to root it, that use the bootloader camera + power
no it wont enter any mode at all just sits on the rogers logo so a new phone should show up in the next 3 to 5 days
this kinda scares me off from trying again but I want to so I might.
got a all new phone and it still wont mount the Sd card like last time
ok so i helped some one root their rogers phone last night. are you trying to flash the radio, or have you followed all of the fastboot commands in the "rogers heres your real root" thread? the guy i was helping couldn't flash the radio but we got it with the fastboot commands
no I'm past loading recovery.img with fastboot and I'm trying to apply the update.zip
thats very odd. so you did all the fastboot commands and still can't get it to work?
is it any rom you try to flash?
well I was following the guide in one of the first posts
whenever i go into recovery mode i get an error on the bottom of the screem
BUILD : RA-dream-v1.7.0
E:Error in CACHE:recovery/log
(No Space left on device)
i cant nand backup or anything
rickyiswhite said:
whenever i go into recovery mode i get an error on the bottom of the screem
BUILD : RA-dream-v1.7.0
E:Error in CACHE:recovery/log
(No Space left on device)
i cant nand backup or anything
Click to expand...
Click to collapse
There are two possibilities:
1) The log is occupiing really the whole space on cache. In that case try to remove the log file from cache directory
2) Did you mess up with custom partion tables? To me this happened some time ago when I forgot to flash fr_boot_xxx.zip onto a boot.img while having installed custom partitions. In that case you have to clean everything. Eventually you need also to flash recovery again. If you have a recent backup, you can try to do a
fastboot erase system -w
then boot into recovery and see, if everything works for you again. If not you need to flash a new recovery:
fastboot flash recovery recovery.img
After that everything should work again, i.e. you can install your backup or you can install a new ROM.
AndDiSa said:
There are two possibilities:
1) The log is occupiing really the whole space on cache. In that case try to remove the log file from cache directory
2) Did you mess up with custom partion tables? To me this happened some time ago when I forgot to flash fr_boot_xxx.zip onto a boot.img while having installed custom partitions. In that case you have to clean everything. Eventually you need also to flash recovery again. If you have a recent backup, you can try to do a
fastboot erase system -w
then boot into recovery and see, if everything works for you again. If not you need to flash a new recovery:
fastboot flash recovery recovery.img
After that everything should work again, i.e. you can install your backup or you can install a new ROM.
Click to expand...
Click to collapse
hmm ok ill try that... thanks... and sometimes it says cant open cache or something
Long story short,
Purchased a Tmobile HTC One, Planned on taking it over to Straight Talk.
I have not asked any questions because I can usually figure this out.
Facts:
Unlocked using All In One
TWRP recovery
Issue:
Keep rebooting once it gets to the HTC One screen with Beats Audio
I am about 22 hours into this and very frustrated, it seems as though I do not have an O.S.
Cannot mount E:
rafalk86 said:
Long story short,
Purchased a Tmobile HTC One, Planned on taking it over to Straight Talk.
I have not asked any questions because I can usually figure this out.
Facts:
Unlocked using All In One
TWRP recovery
Issue:
Keep rebooting once it gets to the HTC One screen with Beats Audio
I am about 22 hours into this and very frustrated, it seems as though I do not have an O.S.
Cannot mount E:
Click to expand...
Click to collapse
Use the ADB Sideload option(follow the directions carefully) in the All-in-One Toolkit to load a ROM.
unremarked said:
Use the ADB Sideload option(follow the directions carefully) in the All-in-One Toolkit to load a ROM.
Click to expand...
Click to collapse
I have tried a couple of times (following directions closely - have done this before on a inspire) and keep getting
"E:unable to mount '/data'" on the phone side & "error: closed"
rafalk86 said:
I have tried a couple of times (following directions closely - have done this before on a inspire) and keep getting
"E:unable to mount '/data'" on the phone side & "error: closed"
Click to expand...
Click to collapse
Hmm. Have you attempted to format data while in TWRP recovery? Also a few more details please--once you had unlocked the bootloader and installed TWRP, did you attempt to install a ROM from that point or boot into stock? If it's the latter, have you attempted to fastboot flash a boot.img from a stock ROM/NAND backup?
rafalk86 said:
I have tried a couple of times (following directions closely - have done this before on a inspire) and keep getting
"E:unable to mount '/data'" on the phone side & "error: closed"
Click to expand...
Click to collapse
I have always had better luck with CWM clockworkmod recovery than TWRP for these kind of situations. So you might want to use the all in one and put Clockwork on. Also when sideloading a rom make sure to rename the rom something nice and short like rom.zip no spaces no numbers just simple and short or it will fail.
unremarked said:
Hmm. Have you attempted to format data while in TWRP recovery? Also a few more details please--once you had unlocked the bootloader and installed TWRP, did you attempt to install a ROM from that point or boot into stock? If it's the latter, have you attempted to fastboot flash a boot.img from a stock ROM/NAND backup?
Click to expand...
Click to collapse
1. Have NOT tried to format data
2. Originally tried to install cm touch, which at that time seemed like it didnt work (could not boot into rom) so I tried to install TWRP for some reason
3. I have attempted to boot stock rom, but always gets hung up on "beats audio" audio screen
unremarked said:
Hmm. Have you attempted to format data while in TWRP recovery? Also a few more details please--once you had unlocked the bootloader and installed TWRP, did you attempt to install a ROM from that point or boot into stock? If it's the latter, have you attempted to fastboot flash a boot.img from a stock ROM/NAND backup?
Click to expand...
Click to collapse
Wow, saved my ass. I formatted /data and now I can finally boot into CM after a fresh ROM install.
Thanks
nullkill said:
I have always had better luck with CWM clockworkmod recovery than TWRP for these kind of situations. So you might want to use the all in one and put Clockwork on. Also when sideloading a rom make sure to rename the rom something nice and short like rom.zip no spaces no numbers just simple and short or it will fail.
Click to expand...
Click to collapse
1. Loaded ClockworkMod Recovery v6.0.3.1
2. Rebooted to recovery
Result:
Loaded CM Recovery and at the bottom it says:
"E: Cant mount /cache/recovery/command
E: Cant mount /cache/recovery/log
E: Cant open/cache/recovery/log
E: Cant mount /cache/recovery/last_log
E: Cant open/cache/recovery/last_log"
Q: Should I try formatting the drive
nullkill said:
I have always had better luck with CWM clockworkmod recovery than TWRP for these kind of situations. So you might want to use the all in one and put Clockwork on. Also when sideloading a rom make sure to rename the rom something nice and short like rom.zip no spaces no numbers just simple and short or it will fail.
Click to expand...
Click to collapse
Side loaded the rom through cwm recovery.
"sideload started...
failed to open driver control: No such file or directory
Restarting adbd...
failed to open driver control: No such file or directory
E: Can't mount /cache/recovery/last_install
E: failed to open last_install: Invalid argument
Finding update package...
Opening update package...
Installing update...
E: Cant mount /cache/recovery/log
E: Cant open/cache/recovery/log
E: Cant mount /cache/recovery/last_log
E: Cant open/cache/recovery/last_log"
UPDATE: After I rebooted it just cycles for the CyanogenMod boot then restarts etc etc...
rafalk86 said:
Side loaded the rom through cwm recovery.
"sideload started...
failed to open driver control: No such file or directory
Restarting adbd...
failed to open driver control: No such file or directory
E: Can't mount /cache/recovery/last_install
E: failed to open last_install: Invalid argument
Finding update package...
Opening update package...
Installing update...
E: Cant mount /cache/recovery/log
E: Cant open/cache/recovery/log
E: Cant mount /cache/recovery/last_log
E: Cant open/cache/recovery/last_log"
UPDATE: After I rebooted it just cycles for the CyanogenMod boot then restarts etc etc...
Click to expand...
Click to collapse
Two things here:
1) Clearing Cache fixes the cache issue you see...
2) To fix the boot loop, you need to `Format /data and /data/media` under `Mounts and Storage`.
That should fix you up.... side loading wont fix a bad /data partition.
kenyu73 said:
Two things here:
1) Clearing Cache fixes the cache issue you see...
2) To fix the boot loop, you need to `Format /data and /data/media` under `Mounts and Storage`.
That should fix you up.... side loading wont fix a bad /data partition.
Click to expand...
Click to collapse
1. Cleared cache - fixed
2. Both datas formatted
Q: Its been a long 24hrs, now I load rom, correct?
rafalk86 said:
1. Cleared cache - fixed
2. Both datas formated
Q: Its been a long 24hrs, now I load rom, correct?
Click to expand...
Click to collapse
It sounds like you have a ROM loaded if its cycling at the BeatsAudio screen. Yes, you can do the ROM now. Make sure you do a factory reset before installing the ROM (or after I suppose)
rafalk86 said:
Long story short,
Purchased a Tmobile HTC One, Planned on taking it over to Straight Talk.
I have not asked any questions because I can usually figure this out.
Facts:
Unlocked using All In One
TWRP recovery
Issue:
Keep rebooting once it gets to the HTC One screen with Beats Audio
I am about 22 hours into this and very frustrated, it seems as though I do not have an O.S.
Cannot mount E:
Click to expand...
Click to collapse
Are you using Mac OSX? What is the format of the external_sd card? Is it formatted FAT, FAT32, or EX_FAT?
Clockworkmod does not support EX_FAT, so you must format it to FAT in order for it to mount. OSX can't format FAT32, so you must format FAT.
Hi
I was able to s-off, install a recovery and root my device OK.
I installed TWRP as part of that process and then installed Clockworkmod while I was testing out Cyanogenmod.
I want to go back to TWRP (or at least Clockworkmod touch) but my phone will only boot into Clockworkmod (non-touch)
Things I've tried:
Flashed TWRP from fastboot
fastboot erase cache
But every time the phone only boots into Clockworkmod 5.x.x.x
The clockworkmod app tells me I have TWRP and Clockworkmod installed already, but same problem when I try to reboot into TWRP from there.
This log comes up in Clockworkmod. Maybe it's relevant:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Anyone kind enough to help I'll be very grateful
Thanks
Flash TWRP, reboot into the phone. Go back to fastboot, flash TWRP again, and check. A different combination may work. It may take a few tries to get it going.
Fixed
SaHiLzZ said:
Flash TWRP, reboot into the phone. Go back to fastboot, flash TWRP again, and check. A different combination may work. It may take a few tries to get it going.
Click to expand...
Click to collapse
Thanks very much. Got it fixed by basically doing what you suggested.
http://forum.xda-developers.com/showthread.php?t=2173863
Awesome. Hit my thanks button and edit the OP to mark it [SOLVED]
Ok So I have an HTC One m7. and I had CyanogenMod installed. Then jsut today I decided I would go back to Sense 6. So I download Android Revolution HD 71.1 for m7 install it on my phoen. Then CWM(Which I hate btw and can't uninstall no matter what I do) says your phone is not rooted would you like to root it when I click reboot phone. No matter which I click I get stuck on the HTC logo boot logo. I don't care if I lose my data or anything so I click factory reset, then wipe cache, then wipe dalvik cache. Then I get the error were it constantly says cant mount /cache or whatever. So to fix it i wipe Dalvik Cache again. Then I try sideloading ViperOne Rom. Guess what It give me *failed to write 'protocol fault <no status> *
Then I tried formatting my data with CWM which took 2 hours and still didn't complete so I rebooted(which led to more problems) Now I cant say install from sdcard because it gives me the error E: Can't Mount /sdcard. So that means I cant adb push Viper /sdcard. I have no Idea what to do. Help me please!
radsherwin said:
Ok So I have an HTC One m7. and I had CyanogenMod installed. Then jsut today I decided I would go back to Sense 6. So I download Android Revolution HD 71.1 for m7 install it on my phoen. Then CWM(Which I hate btw and can't uninstall no matter what I do) says your phone is not rooted would you like to root it when I click reboot phone. No matter which I click I get stuck on the HTC logo boot logo. I don't care if I lose my data or anything so I click factory reset, then wipe cache, then wipe dalvik cache. Then I get the error were it constantly says cant mount /cache or whatever. So to fix it i wipe Dalvik Cache again. Then I try sideloading ViperOne Rom. Guess what It give me *failed to write 'protocol fault <no status> *
Then I tried formatting my data with CWM which took 2 hours and still didn't complete so I rebooted(which led to more problems) Now I cant say install from sdcard because it gives me the error E: Can't Mount /sdcard. So that means I cant adb push Viper /sdcard. I have no Idea what to do. Help me please!
Click to expand...
Click to collapse
its simple to fix, your problem is simply cwm recovery, you need to use twrp to flash either of those rom's, so start there, recommended is 2.6.3.3, its the most problem free.
Code:
fastboot flash recovery recovery_name.img
fastboot erase cache
fastboot reboot-bootloader
then enter recovery, select wipe then format data, push or sideload a rom then flash it.
ViperOne Install Instructions
1. Download the the latest ViperOne full ROM zip from the download section
2. Place the file somewhere on your phone storage. Alternatively, if you have a USB OTG cable (I have this exact one), you can place the rom on a USB key (FAT32, NTFS are all supported).
3. Confirm the MD5 on the download page matches the MD5 of the file on your phone (ES File Explorer will show the MD5 of the file)
4. Reboot to TWRP Recovery
5. Backup current ROM if desired
6. Install ROM using TWRP and select wipe during aroma install if coming from another base
7. Reboot and Enjoy
Seanie280672 said:
its simple to fix, your problem is simply cwm recovery, you need to use twrp to flash either of those rom's, so start there, recommended is 2.6.3.3, its the most problem free.
Code:
fastboot flash recovery recovery_name.img
fastboot erase cache
fastboot reboot-bootloader
then enter recovery, select wipe then format data, push or sideload a rom then flash it.
ViperOne Install Instructions
1. Download the the latest ViperOne full ROM zip from the download section
2. Place the file somewhere on your phone storage. Alternatively, if you have a USB OTG cable (I have this exact one), you can place the rom on a USB key (FAT32, NTFS are all supported).
3. Confirm the MD5 on the download page matches the MD5 of the file on your phone (ES File Explorer will show the MD5 of the file)
4. Reboot to TWRP Recovery
5. Backup current ROM if desired
6. Install ROM using TWRP and select wipe during aroma install if coming from another base
7. Reboot and Enjoy
Click to expand...
Click to collapse
Ok I'm currently sideloading ViperRom but at first it was stuck at 2% so I cancelled it now it's stuck at 26% for like 30 min
radsherwin said:
Ok I'm currently sideloading ViperRom but at first it was stuck at 2% so I cancelled it now it's stuck at 26% for like 30 min
Click to expand...
Click to collapse
did you format data first ? any unable to mount messages, you could also try advanced wip and select everything in the list.
try pushing it instead
with the phone in twrp main screen only, no sub menu's and the rom in the same folder as adb and fastboot on your computer type:
Code:
adb push (name_of_rom).zip /sdcard/
takes a while and will look unresponsive, but the cmd window will let you know when its done. Make sure you unplug your phone before flashing.
Seanie280672 said:
did you format data first ? any unable to mount messages, you could also try advanced wip and select everything in the list.
try pushing it instead
with the phone in twrp main screen only, no sub menu's and the rom in the same folder as adb and fastboot on your computer type:
Code:
adb push (name_of_rom).zip /sdcard/
takes a while and will look unresponsive, but the cmd window will let you know when its done. Make sure you unplug your phone before flashing.
Click to expand...
Click to collapse
ok I 've been sitting here for a while and the cmd prompt just shows a blinking line under my command. The file is in my sdcard but is it complete?
Seanie280672 said:
did you format data first ? any unable to mount messages, you could also try advanced wip and select everything in the list.
try pushing it instead
with the phone in twrp main screen only, no sub menu's and the rom in the same folder as adb and fastboot on your computer type:
Code:
adb push (name_of_rom).zip /sdcard/
takes a while and will look unresponsive, but the cmd window will let you know when its done. Make sure you unplug your phone before flashing.
Click to expand...
Click to collapse
also it doesnt let me format data wipe. It gives me error like E: Unable to mount '/cache/
radsherwin said:
also it doesnt let me format data wipe. It gives me error like E: Unable to mount '/cache/
Click to expand...
Click to collapse
with your phone in fastboot, type fastboot format cache
Seanie280672 said:
with your phone in fastboot, type fastboot format cache
Click to expand...
Click to collapse
doesn't work either.. I tried everything nothing is working. I can't even get ViperOne Rom on my phone.
anyone? I need help! I'm looking all over the internet for solutions and apparently every has solved their problem but me. HELP!
Seanie280672 said:
with your phone in fastboot, type fastboot format cache
Click to expand...
Click to collapse
anymore help? When ever I try to ADB sideload It gets stuck on 1% forever. Whenever I try to adv push it does nothing and doesnt tell me anything. everytime I try to format It says successful but it still gives me error saying E: / cant mount cache. PLEASE HELP ME
radsherwin said:
anyone? I need help! I'm looking all over the internet for solutions and apparently every has solved their problem but me. HELP!
Click to expand...
Click to collapse
I recommend you start from scratch
from the bootloader / power down
wait a couple min and boot back to fastboot
plug the phone into the PC
from your command prompt type
fastboot devices
see your device serial number
type
fastboot erase cache
type
fastboot reboot-bootloader
now try sideload your rom from TWRP 2.6.3.3 /advanced/sideload
clsA said:
I recommend you start from scratch
from the bootloader / power down
wait a couple min and boot back to fastboot
plug the phone into the PC
from your command prompt type
fastboot devices
see your device serial number
type
fastboot erase cache
type
fastboot reboot-bootloader
now try sideload your rom from TWRP 2.6.3.3 /advanced/sideload
Click to expand...
Click to collapse
when I try fastboot erase cache it says
"******** Did you mean to fastboot format this partition?
erasing 'cache'...
FAILED (status read failed (Too many links))
finished. total time: 0.293s
So you have CWM / TWRP installed? Try copying a ROM to the external SD card, and install it that way. Clear everything in recovery first, cache, dalvik, etc... I had the same problem with the M8 and it drove me nuts until I did it all from the SD. If not, I would suggest trying the full RUU, it has saved me many a time.
hack14u said:
So you have CWM / TWRP installed? Try copying a ROM to the external SD card, and install it that way. Clear everything in recovery first, cache, dalvik, etc... I had the same problem with the M8 and it drove me nuts until I did it all from the SD. If not, I would suggest trying the full RUU, it has saved me many a time.
Click to expand...
Click to collapse
I have the m7 not the m8. So I have no sd card. What is the RUU method? I have TWRP installed right now.
This is getting on my nerves. Ive been sitting here for 6 hours and I posted 4 times and I still have not fixed this problem!!!!!!!! No one can explain clearly or respond to me even. Half my problems are being ignored. and half the things I say are being ignored.
radsherwin said:
I have the m7 not the m8. So I have no sd card. What is the RUU method? I have TWRP installed right now.
Click to expand...
Click to collapse
Oh that's right dang it. When I had my M7 I converted it to a Dev Edition by changing the CID and then using a file like this:
http://dl4.htc.com/RomCode/Source_and_Binaries/m7ul-3.4.10-g77e9ea0.zip
Mine was an ATT version so MID matched.
---------- Post added at 07:28 PM ---------- Previous post was at 07:27 PM ----------
radsherwin said:
This is getting on my nerves. Ive been sitting here for 6 hours and I posted 4 times and I still have not fixed this problem!!!!!!!! No one can explain clearly or respond to me even. Half my problems are being ignored. and half the things I say are being ignored.
Click to expand...
Click to collapse
Hey, hey, hey, patience my friend, we are here to help, ALL of us, we are trying.
Scratch that link, it doesn't like direct posts, find the Brighstar WWE RUU by searching at: http://www.htcdev.com/devcenter/downloads, or find the ATT, or TMobile. Not sure what your carrier is, but the Dev Edition is the way to go.
hack14u said:
Oh that's right dang it. When I had my M7 I converted it to a Dev Edition by changing the CID and then using a file like this:
http://dl4.htc.com/RomCode/Source_and_Binaries/m7ul-3.4.10-g77e9ea0.zip
Mine was an ATT version so MID matched.
---------- Post added at 07:28 PM ---------- Previous post was at 07:27 PM ----------
Hey, hey, hey, patience my friend, we are here to help, ALL of us, we are trying.
Click to expand...
Click to collapse
The link just sends me to the htc website. Also what does converting my m7 to dev edition do exactly? Will it help with the Sideload problem or the cant mount cache problem?
And I know you guys are trying to help me. Im just mad because everything I do is not working. Im searching all over the internet and nothing is helping. Errors lead to more errors. Reminds me of the time I tried learning progrramming and I made a simple program but It wouldnt work. I posted it on 3 websites and no one could help me. So I'm sorry for going off like that.
radsherwin said:
The link just sends me to the htc website.
And I know you guys are trying to help me. Im just mad because everything I do is not working. Im searching all over the internet and nothing is helping. Errors lead to more errors. Reminds me of the time I tried learning progrramming and I made a simple program but It wouldnt work. I posted it on 3 websites and no one could help me. So I'm sorry for going off like that.
Click to expand...
Click to collapse
I know it can be frustrating, but nothing you can do to the M7 can hurt it. Try the link above HTC doesn't like direct links.
hack14u said:
I know it can be frustrating, but nothing you can do to the M7 can hurt it. Try the link above HTC doesn't like direct links.
Click to expand...
Click to collapse
ok im doing it right now. Im AT&T btw.
I seem to have fixed the E: Can't mount cache problem. All i did was go to advance and click only on cache. Now all I need is to sideload or pus my ViperOne rom over to my HTC. Then hopefully nothing goes wrong. What do I do once the zip file is done downloading?
That might not be the right one, it should be an exe around 1 GB in size, sorry. Look around for it, if it's not still posted at the HTC Dev site, then it is around here somewhere. There are also some nandroids I have seen that should help you restore to stock. Nonetheless, once you have that Viper Rom on there, you should be able to flash anything you want. A full RUU will restore your phone to the state in which you bought it in, just like brand new.